submitted | available | document details (if available) | source link |
---|---|---|---|
January 13 2020 | January 13 2020 | PL3522FW(PGD829AFHK)-新把手新刷卡区域-说明书-191130删除开关和入侵报警功能 aaa Acrobat Distiller 9.3.2 (Windows) |
various | user manual | Users Manual | 1.21 MiB | January 13 2020 |
REV2.1 ERP PL3522FW-HK-SMT00010A-V1 ERP P/N:
PL3522FW/PGD829AFHKSMT000,REV.C145x210mm80g 2244UMPGD82920191130RoHS2.0REACHProp65POPsPAHs DesignerSunny Date:2019-11-30 K MORTISE EDITION SECURE LUX USER MANUAL Table of Contents Section 5 - Advanced Features 5.1 Offline Access Code (OAC) Section 6 - Important Notes Section 7 - Cleaning Tips Section 8 - Safety Precaution 36 37 38 39 Section 1 - Product Highlights 1.1 Product Features Section 2 - Product Overview 2.1 Product Overview- Exterior 2.2 Product Overview- Interior 2.3 Understanding Your New Lock 2.4 Factory Reset 2.5 Keypad Display Switch 2.6 Rebooting Lockly Secure 2.7 Low Battery 2.8 Changing the Battery Section 3 - Using Your Smart Lock 3.1 Configuring Access 3.2 Entering Programming Mode 3.3 Adding an Access Code 3.4 Deleting an Access Code 3.5 Checking the Access Code 3.6 Adding a Fingerprint 3.7 Fingerprint Scanning Directions 3.8 Fingerprint Scanning Tips & Troubleshoot 3.9 Deleting Stored Fingerprints 3.10 Adding an RFID card 3.11 Deleting RFID Card 3.12 Adding Secure Link Section 4 - Locking and Unlocking 4.1 Locking/Unlocking with Access Codes 4.2 Locking/Unlocking Lockly with Fingerprints 4.3 Locking/Unlocking Lockly with App 4.4 Locking/Unlocking using RFID 4.5 Locking/Unlocking Lockly with Physical Key 4.6 Locking and Unlocking with Voice Assistant Control 4.7 Safe Mode 4.8 Lock and Unlock using Anti-theft Button 4.9 Anti - Theft Button Switch 4.10 Locking from the Outdoor 1 3 4 5 6 6 7 8 9 10 11 12 14 16 17 20 22 23 24 25 26 27 28 29 29 30 31 33 34 35 35 For additional support, visit http://lockly.com/help or email help@Lockly.com TABLE OF CONTENTS 1.1 Product Features Patented Anti-Peep Keypad Digits are randomly displayed on the keypad ensuring access codes to be undetectable to intruders after repeated use. To experience the patented and innovative keypad software, powered by PIN GenieTM, please download the PIN GenieTM Vault App from iOS App Store or Google Play. Multiple Access Codes & Monitoring Store up to 18 Access Codes for family, friends and guests, as well as monitor entry and exit records. Advanced 3D Fingerprint Recognition Biometric Fingerprint Recognition protocol allows up to 99 registered fingerprints to be used and accepts only actual fingerprints - preventing lifted prints from being used. RFID Card Access You Lockly Secure Lux can be accessed by use of RFID card. Complete Privacy The exterior displayed keypad can be locked and switched off using the simple ON/OFF toggle from the inside panel. The owner can prevent others trying to input the passcode from the outside and entering the home. Offline Access Code (OAC) The offline access code can allow owners to issue access codes, set the allowed access duration, all without Lockly ever connecting to the internet, so in case of power outage, you can still magically and remotely issue Access Codes without any connection to the web. Anti-theft Button Thieves may use improvised wires or other picking tools to access your inside door handle. Prevent them from unlocking your door when this button is activated. SECTION 1.1 1 Automatic Lock Owners no longer have to worry about forgetting to lock the door. With Auto Lock enabled, Lockly Secure will automatically re-lock the door based on your customized timing set between 5-300 seconds. Backup Keys and 9V Battery Socket The door can be opened with physical backup keys. There is also a 9V battery connection socket for emergency power backup to access the keypad in case your smart lock runs out of battery. 2 SECTION 1.1 2.1 Product Overview- Exterior Front (Front Body Touchscreen RFID Card Reader Keypad Buttons Handle Fingerprint Reader Key Hole Key Hole Cover 9V Battery Back Up Socket Power Status Lock Status icon Bluetooth light OK Button Bluetooth icon SECTION 2.1 3 2.2 Product Overview - Interior Back (Main Body Battery Compartment Cover Battery compartment
*Operated by 4 X AA size alkaline batteries
( not included ) Inside Handle Thumbturn 4 Program Button Touchscreen Switch Reset Button Anti-theft Button SECTION 2.2 2.3 Understanding Your New Lock NOTICE The Default Access Code is 1 2 3 4 5 6 After the installation of your new Lockly, understanding some key functions of operating your smart lock is important. The following guides will walk you through resetting a lock, adding Access Codes, deleting Access Codes, adding and deleting fingerprints , adding and deleting RFID cards and also how to configure your OAC (Offline Access Code). For any questions you can always visit http://lockly.com/help for assistance. Don't forget that Lockly Secure works best with our iOS and Android app. Please download the app by visiting the link below. Scan or visit Lockly.com/app SECTION 2.3 5 2.4 Factory Reset In order to restore the Lockly to factory default settings, you must have your Initial Code available. The Initial Code can be found on the Initical Code Card that came with your smart lock. (See Quick Start Guide) After you have the Initial Code ready, push the reset button on the back panel of the Lockly to perform your reset. See below to see which Reset Process applies for you. Once the smart lock has been reset, all the data previously stored will be deleted. Reset Button 2.5 Keypad Display Switch The exterior keypad screen can be locked and turned off using the ON/OFF switch at the back panel of the smart lock. When it is switched off, people outside cannot enter any passcode to unlock the door. OFF ON Keypad screen Keypad 6 SECTION 2.4 2.6 Rebooting Lockly Secure NOTICE Reboot Lockly in case of dead battery or malfunction. No settings will be changed and all Access Codes will still be stored within Lockly. Press and release the reboot button when you want to reboot the lock. Your Lockly will beep once after reboot. Only reboot when necessary. To reboot, find the reboot button located below the keyhole from the exterior of Lockly Secure Lux. You will need something small such as a paperclip, to press the reboot button. Insert the paper clip and press down firmly. Reboot Button SECTION 2.6 7 2.7 Low Battery When the battery is in seriously low condition, Lockly will make continuous beeping sounds in addition to the flashing low battery icon on the touch screen. You should replace batteries immediately to avoid your smart lock from shutting down. When your smart lock low-battery warning alert finally dies, you will have 3 chances to unlock your smart lock either by a password, APP or fingerprint. If the unlock was successful, the low-battery warning alert will be on for 1 minute. After which, the smart lock will go to dead-battery mode and will lock auto lock in 5 seconds and the screen will display a low-battery icon. Condition Indicator Solution Low Battery Battery Icon on the display keypad will light up to indicate low battery. Replace batteries immedi-
ately to avoid battery failure. Lockly Secure can still operate up to 300 cycles in low battery condition. Dead Battery When there is no display and sounds;
and screen is non-functional. Replace batteries immediately. Supplied physical backup keys can be used to unlock the door. Alternatively, use a 9V battery as shown below to temporarily activate the lock. Your Lockly will automatically detect battery polarity. So hold your 9V battery lead in place against bottom of the Lockly to temporarily activate the screen to enter your Access Code. Be sure to hold the 9V battery against the contact points located at the bottom of the lock until you have successfully unlocked your door with your Access Code. Once unlocked, batteries should be replaced immediately. _
9V Alkaline battery 8 SECTION 2.7 2.8 Changing the Battery Open the battery compartment cover and insert 4 AA alkaline battery as shown below. Make sure the batteries are correctly oriented. Replacement of batteries does not affect programmed data. Replace only with new batteries. DO NOT mix with used batteries. 1 2 3 AA 1.5V X 4
NOTICE Whenever batteries are replaced, reconnecting the smart lock to your smartphone App is required. If you have not yet downloaded the app, visit:
Lockly.com/app SECTION 2.8 9 3.1 Configuring Access 3.1 Configuring Access NOTICE The Default Access Code is 1 2 3 4 5 6 Your new Lockly Access Code can be any combination of 6 to 8 digits. Once a new Access Code is entered, the Default Access Code of 123456 would be deleted. A Maximum of 8 sets of Access Codes can be stored for use. How to Use the Keypad There are a total of five (5) buttons on the keypad as shown in the example image to the left. The numbers in each button may differ than what is shown on your device than what is displayed here. To enter your required digit, just simply press the circle where your number is shown. You do not need to press the actual number as anywhere within the circle will suffice. The button on the bottom is the OK button. You will be pressing this button when you are done entering your Access Code. OK Button NOTICE The Default Access Code is 1 2 3 4 5 6 Your new Lockly Access Code can be any combination of 6 to 8 digits. Once a new Access Code is entered, the Default Access Code of 123456 would be deleted. A maximum of 16 sets of Access Codes can be stored for use at any given time. To add more than 16 sets of Access Codes, you must delete an existing Access Code before dding a new code. If you're not using the APP, you can store up to 18 sets of Access Code. 10 SECTION 3.1 3.2 Entering Programming Mode To enter Programming Mode, remove the battery compartment cover on the interior side of the Secure to expose the Reset and Program buttons. Simply press the Program button to enter programming mode. Note: Program button will be disabled once synced to a smart phone. Configure all settings via synced smart phone. Access Codes previously added by Programming mode will be cleared. Program Button To end Programming Mode, press the Program button anytime. Programming Mode will automatically exit if the keypad is inactive for more than thirty (30) seconds. Number Mode Add Passcode Delete Passcode View Passcode After entering Programming Mode, you should see the screen as displayed to the right on your Lockly keypad. Follow the following steps to add, delete, or check your Access Codes. SECTION 3.2 11 3.3 Adding an Access Code While in Programming Mode, select 1AD to add an Access Code. If you are not in Programming Mode, please see Section 3.2 to enter Programming Mode. After pressing 1AD press Pd to add an Access Code. Enter your new 6 - 8 digit Access Code and press when you are finished. You will then re-enter the code to confirm your new Access Code. Remember, just touch the digit you need within the circle around each 3 numbers. There is no need to touch the exact location of the number. For example, based on the example image to the left, if you need 1, you can touch the upper left button . For 6, you would touch the upper right button. 12 SECTION 3.3 3.3 Adding an Access Code (Continued) If you have successfully entered your new Access Code twice, you will see the new code displayed here. In this example, we chose 654321. Press to Confirm or to cancel. To exit or cancel, you can always press or If the two (2) Access Codes you entered does not match, an error message will appear on the screen (As shown to the left). Press OK to return to the Programming Screen and try again. See Section 3.3 OK Button SECTION 3.3 13 3.4 Deleting an Access Code While in Programming Mode, select 2DE to delete an Access Code. If you are not in Programming Mode, please see Section 3.2 to enter Programming Mode. After pressing 2DE press Pd to delete an Access Code. Example Only Active Access Codes will then be displayed on the screen in sequence from left to right, top to bottom. In the example shown on the left, the Access Code displayed is 1 3 5 7 9 0 . Rotate through different Access Codes shown by touching any number on the screen. If you find the Access Code you want to delete, simply hold the OK button for 3 seconds. (Continue on next page) OK Button 14 SECTION 3.4 3.4 Deleting an Access Code (Continued) Once you have selected the Access Code you want to delete, Lockly will ask you to confirm deletion by showing you the Access Code you are deleting, in this example, 1 3 5 7 9 0. Press to delete, or to cancel. NOTICE There are two incidents where your Access Code cannot be deleted. There are no Access Codes set. The factory default Access Code cannot be deleted. There is only one (1) Access Code saved in the smart lock. At least one code must be registered. Please add another Access Code before attempt-
ing to delete the existing code. No Access Codes Set Only one Active Access Code SECTION 3.4 15 3.5 Checking the Access Codes While in Programming Mode, select 3CH to check registered Access Codes. If you are not in Programming Mode, please see Section 3.2 to enter Programming Mode. Active Access Codes will then be displayed on the screen in sequence from left to right, top to bottom. In the example shown on the left, the Access Code displayed is 1 3 5 7 9 0 . Rotate through the different Access Codes by touching any number on the screen. To exit Check Access Code screen, simply press the OK button. OK Button If there are no Access Codes registered in your smart lock, Check Access Code mode will be invalid. The default Access Code will not be shown on the display keypad, and you will see the following screen shown to the left instead. 16 SECTION 3.5 3.6 Adding a Fingerprint We are using an advanced biometric sensor, providing the most secure fingerprint authentication. For security reasons, Lockly will only accept fingerprint patterns that consist of cross intersection points. Patterns with no cross intersection points will not be acceptable. Please check your fingers before registration to make sure the finger you want to register will be acceptable by our system. Otherwise, use an alternative finger to ensure successful registration. The following examples show which types of fingerprint patterns will be acceptable. It is highly recommended to enroll at least one finger from each hand in case the hand you are using is unavailable, such as, in instances like if you are holding items in that hand or have sustained an injury. Fingerprint Pattern with Cross Intersection Lines Concentric or Parallel Pattern with no Cross Intersection Lines Fingerprint with Scars or Worn Out Ridges OK Not OK Not OK Your Lockly can register up to ninety-nine (99) fingerprints. Please read the following sections if you want to add or delete fingerprints. We recommend using your app to add fingerprints, however, the following section can show you without using the app. SECTION 3.6 17 3.6 Adding a Fingerprint (Continued) While in Programming Mode, select 1AD to add an Access Code. If you are not in Programming Mode, please see Section 3.2 to enter Programming Mode. After pressing 1AD press FP to register a Fingerprint. Upon pressing FP, you will enter Fingerprint Registration Mode and you will see a green LED ring light up on the fingerprint panel on the exterior of Lockly. Once youre in Fingerprint Registration Mode you will see two numbers displayed on keypad. The top number is your Fingerprint Registration number, in this example to the left, 1. The bottom number will always start with a 6. You must successfully scan your fingerprint six (6) times for it to properly register. Every time you scan your fingerprint, the number on the bottom will change, starting from 6 - then 5, 4, 3, 2, 1, until the fingerprint is successfully registered. Note: For reference, please keep a record of your fingerprint registration number to distinguish whom it was registered to. 18 SECTION 3.6 3.6 Adding a Fingerprint (Continued) NOTICE Please make sure your fingers are clean from dirt and oils before scanning your fingerprint. Make sure the sensor is also clean by taking a soft cloth and wiping the surface. Scan your finger by lightly placing your designated finger on the sensor until you hear a beep. Lift your finger and repeat the process slowly until the digit 6 shown on the screen becomes 1. If you have successfully scanned and registered your fingerprint, you will hear a long beep, and the Bluetooth icon will flash green. PASS will show on the keypad and press OK to exit. If you did not successfully register your fingerprint, FAIL will show on the keypad. If FAIL is displayed, press OK to return to the previous screen to rescan your finger. For instructions on scanning an optimal fingerprint, please proceed to Section 3.7. OK Button SECTION 3.6 19 3.7 Fingerprint Scanning Directions The fingerprint sensor equipped in Lockly is loaded with powerful fingerprint algorithms to extract quality features from fingers, even in poor conditions. Placing your finger on the sensor correctly helps consistency in fingerprint recognition. The following directions and tips will guide you on how to scan an optimal fingerprint image. Sensor Core Position your finger on the center of the sensor 20 SECTION 3.7 3.7 Fingerprint Scanning Directions (Continued) OK OK Top View Side View X X X X Correct Incorrect SECTION 3.7 21 3.8 Fingerprint Scanning Tips & Troubleshoot Tips for Fingerprint Enrollment and Recognition Place your finger to completely cover the sensor with maximum contact surface. Position the center of your finger (core) to the center of the sensor. Hold your finger still for more than a second until you hear a beep. Scan a finger that is clean and free from dirt. If a finger is cracked and dry, lightly moisten the finger to improve recognition. Children ages 12 and under are not recommended to use fingerprint access due to the constant changes of their fingers during growth. Elderly with fading fingerprints may have difficulty in recognition. If your finger has a cut, scar, or cracked skin due to dryness, try another finger. Troubleshooting Fingerprints In case of poor fingerprint conditions If wet - wipe excess moisture from finger before scanning If dry - moisturize or blow warm breath over finger before scanning If dirty - wipe stains and dirt off from finger before scanning Make sure the sensor is clean from dirt or smudges - wipe sensor with soft cloth regularly For more troubleshooting help, visit http://lockly.com/help 22 SECTION 3.8 3.9 Deleting Stored Fingerprints*
While in Programming Mode, select 2DE to delete a Fingerprint. If you are not in Programming Mode, please see Section 3.2 to enter Programming Mode. After pressing 2DE to delete, press FP to delete a fingerprint. Your registered fingerprint numbers will be displayed on the screen. Tap number to rotate to the next registered fingerprint. When you have found the fingerprint ID you want to delete, press and hold the OK button for 3 seconds to delete. (Example shown
- 02) You will then see a confir-
mation page displaying and with the fingerprint number you are deleting displayed in the lower left. Select Y to delete or N to cancel. OK Button Fingerprint ID Number Alternatively, while on Programming Mode, select 2DE, then press FP and place the registered fingerprint you want to delete on the finger-
print sensor.Your smart lock will identify the fingerprint and jump to confirmation page displaying Y and N. Select Y to delete or N to cancel.
*Only works when lock is not paired with a smart phone device. If paired to a device please delete your fingerprints from the administrative device paired to your lock. SECTION 3.9 23 3.10 Adding an RFID Card While in Programming Mode, select 1AD to add an RFID card. If you are not in Programming Mode, please see Section 3.2 to enter Programming Mode. After pressing 1AD press Id to add an RFID card. Put the RFID card to the RFID card sensor position on exterior panel. PASS will show on the keypad once card is registered successfully. 24 SECTION 3.10 3.11 Deleting an RFID Card While in Programming Mode, select 2DE to delete an RFID card. If you are not in Programming Mode, please see Section 3.2 to enter Programming Mode. After pressing 2DE press Id to add an RFID card. Your registered RFID card will be displayed on the screen. Tap the screen to show the next registered RFID. When you have found the RFID card you want to delete, press and hold the OK button for 3 seconds to delete. You will then see a confirmation page displaying Y and N with RFID card number you are deleting displayed in the lower left. Select Y to delete or N to cancel. SECTION 3.11 25 3.12 Adding Secure Link Lockly Secure Link adds live status monitoring and voice assistant control capabilities to your Lockly Smart Lock. If you purchased a Secure Pro model, the Secure Link is included in your package. For all other Lockly products, the Secure Link can be purchased and added anytime. To set up the Lockly Secure smart lock with Secure Link Wi-Fi Hub and Door Sensor, launch the Lockly App on your iOS or Android device. From the main menu drop down located on the upper left of the screen, select Add a New Device then select Secure Link Wi-Fi Hub. Follow the in-app instructions to set up your Secure Link. To activate voice commands, you will need the Google Home Assistant or Amazon Alexa device with Actions (Google) and Skill (Amazon) added before you can configure voice commands. 26 SECTION 4.1 4.1 Locking/Unlocking Lockly with Access Codes Lockly Secure can be unlocked using 1 of 5 ways - via your stored Access Code, registered fingerprint, RFID Card, smartphone with Bluetooth, or with the physical key supplied with your lock. Slide your hand across the screen to activate the keypad. Enter your 6 to 8 digit Access Code followed by the . Press OK anytime to reset if you entered the wrong digit. If the Access Code entered is correct, the door will unlock. If the Access Code entered is incorrect, Lockly will beep twice. OK Button Three consecutive wrong attempts will put Lockly in Safe Mode. (See Section 4.6) Lock your Lockly Secure by pressing the OK Button anytime when the door is closed. Lockly Secure will also auto-lock after five (5) seconds after unlocking and opening. You may toggle between two types of keypad displays to enter your Access Code. The fixed digit version and the PIN GenieTM version (Recom-
mended). Press and hold the OK Button for 3 seconds to toggle back and forth between the two keypads. PIN GenieTM Fixed Digit Hold OK Button (3 sec) SECTION 4.2 27 4.2 Locking/Unlocking Lockly with Fingerprints Unlocking Place a registered finger to the fingerprint scanner located on the exterior handle of the lock. To register a fingerprint, please see Section 3.6. If your fingerprint is registered and acknowledged, you will hear a beep sound and a Green LED will light up on the fingerprint scanner. You can then push down the handle and open the door. If you see a Red LED, it means your fingerprint is not recognized. You must wait until the red LED is off to try again. For best fingerprint scanning practices, see Section 3.7. Locking To lock the Lockly, press the OK Button anytime when the door is opened. OK Button 28 SECTION 4.3 4.3 Locking/Unlocking Lockly with App You must have the Lockly iOS or Android app installed in order to lock and unlock with the smartphone app. Please first download the app from the correct store. Scan or visit Lockly.com/app 4.4 Locking/Unlocking using RFID Light up the screen by touching the keypad and move your RFID card closer to the panel. You can push down the handle and open the door after it chimed. SECTION 4.4 29 4.5 Locking/Unlocking Lockly with Physical Key Exterior View To unlock your Lockly using the physical key (supplied), open the key cover below the exterior handle by pushing the top part of the cover to reveal the keyhole. Insert your key and turn clockwise or counter clockwise to lock or unlock the door. 30 SECTION 4.5 4.6 Locking and Unlocking with Voice Assistant Control Once your Lockly Smart Lock and Secure Link Wi-Fi Hub has been installed and configured correctly, make sure you enable the Lockly Google Home Action and Amazon Alexa Skill first before you can configure your voice to perform voice commands. You can ask your questions such as door status or request for your door to be locked or unlocked.
- Ok Google, unlock my Back Door.*
- Ok Google, is my Back Door locked
- Ok Google, lock my Back Door.
- Ok Google, is my Back Door unlocked
- Alexa, unlock my Front Door.*
- Alexa, is my Front Door locked
- Hi Alexa, lock my Front Door.
- Alexa, is my Front Door unlocked
*Unlock requests will require additional voice security codes. You may configure it in the settings page. SECTION 4.6 31 4.7 Safe Mode Lockly will enter Safe Mode when three (3) consecutive wrong Access Codes are entered within 5 minutes. When in Safe Mode, the lock status icon will start to flash. To disable Safe Mode, you must unlock the door using the correct fingerprint or enter the correct Access Code twice in a row. Activate the keypad by pressing and holding for 3 seconds. Once the screen is activated, enter the correct Access Code carefully twice, pressing after every time. If you enter the wrong code, the keypad will then be disabled for 10 minutes. Countdown Prompt
(Displayed in Minutes) Will start with 10 and countdown until 0. Example A Example B You will see a 10 on the screen, notifying the number of minutes that the keypad is disabled for. After 10 minutes, you may attempt to enter the correct Access Code to unlock the door. After the second incorrect attempt to unlock the lock with the wrong Access Code, Lockly will disable the keypad for 20 minutes, displaying a 20 on the screen. After the third wrong attempt to unlock the door with the correct Access Code, the screen will be disabled for 30 minutes. (Example A and Example B above). Note: In order to conserve power, the countdown prompt will only be displayed for 3 seconds. You can reactivate the screen by sliding your hand across the screen. 32 SECTION 4.7 4.7 Safe Mode ( Continued ) There are four (4) ways to disable Safe Mode. Option 1 - Entering Correct Access Code Activate the keypad by pressing and holding for 3seconds. Enter the correct Access Code twice (2) when the keypad is available, pressing after every time the Access Code is entered. Option 2 - Lockly Bluetooth App Use the app that is synced to your Lockly to disable Safe Mode by unlocking the door. If you have not downloaded the app to use with your smart lock, you wont be able to use this option to disable Safe Mode. Option 3 - Physical Key There is a pair of keys included with your new lock. You may use the keys to manually unlock the door. To learn how to use your physical keys, see Section 4.4. Option 4 - Registered Fingerprint Use any registered fingerprint to reactivate the keypad. The door will unlock and reactivate the keypad once a registered fingerprint is used. Third wrong attempt: keypad will enter SAFE mode and be disabled for 30 minutes. To reactivate the screen, just slide your hand across the screen. SECTION 4.7 33 4.8 Lock and Unlock using Anti-theft Button The Anti-theft button is designed to prevent outsiders from picking your inside door handle with use of wires or improvised tools to unlock door. This also helps to prevent unconscious unlock by children or pets from the inside of your home. This feature is activated when the Anti - theft Button is popped - out. Follow below actions to lock and Unlock when this feature is active:
Hold the button Hold the button To Lock : Hold and press the button down and lift the handle upward for locking the door. To Unlock : Hold and press the button down and push the handle downward for unlock-
ing the door. 34 SECTION 4.8 4.9 Anti - Theft Button Switch Lockly Secure Lux is shipped default with anti - theft button deactivated. To Activate, locate the switch at the back on the indoor handle and push to the LEFT. To Deactivate, press the Anti-Theft Button and push the switch to the RIGHT. Inside view of the inner handle R L Anti-theft ON/OFF Key When you are outside the door, lift up the handle or turn the key to lock the door. 4.10 Locking from the Outdoor Lockly smart lock will automatically lock once your door is closed. You can set the Auto Lock timer or you may opt to disable this feature through the APP. When Auto-lock is disabled, you can quickly lock your door with One-Touch anywhere on the keypad or simply press the . This feature can be activate or deactivated through the App. Go to Settings , then select Touchscreen Locking. SECTION 4.9 35 5.1 Offline Access Code (OAC) The Offline Access Code (OAC) is a unique feature of our smart lock. It allows you to grant access to guests remotely without guests needing to download the app. To use the OAC feature, make sure you download the Lockly app for iOS or Android first, and sync your smart lock to your mobile device. OAC can only be issued by the administrative owner of the lock. From there, you can then issue an Offline Access Code within the app. Go to Access and choose Add a New User, then select Offline Access Code (OAC) and follow on screen instructions to generate your Offline Access Code. Understanding Offline Access Code (OAC) OAC are issued to the guest by asking them to enter 4-12 digit number after a double - click on the . Your Lockly randomly generates the Offline Access Code which can be shared to your guests together with the instructions generated using the Lockly app. After a double-click on the , touchscreen will display numbers on Fixed Digit mode, then guest can enter the Offline Access Code. 36 SECTION 5.1 6.1 Important Notes Auto Lock Feature Your lock can be programmed to auto-lock between 5-300 seconds after the door opening. You can select the timing through the Lockly App. If auto-lock is not activated and door is still open, the touchscreen will remain lighted, simply press the on the keypad to lock. One-Touch Locking You can always manually do a quick lock by touching anywhere on the touchscreen. Lockly smart lock is shipped with this feature already activated. You may deactivate this feature through the Lockly App. 9V Backup Access When your Lockly is out of power, you can temporarily activate the keypad by using a 9V battery against the bottom of the exterior side of the smart lock. Please see Section 2.9 for more info. Physical Keys Even though you have your fingerprints registered, RFID cards and Access Codes stored, its always best practice to carry your physical keys with you at all times in case for any reason, Lockly falls into Safe Mode. Initial Code You may find an Initial Code Card with an Initial Code included in your package. It is very crucial that you do not lose this card. Please store this card safely as you will need the default Initial Code on that card to master reset your lock in case, for any reason, you have lost the phone paired to Lockly and also forgot your Access Code. Troubleshooting Please visit http://lockly.com/help for troubleshooting and the most frequently asked questions and answers. SECTION 6.1 37 7.1 Cleaning Making sure your Lockly is clean is best practice to ensure optimal product use. Follow the DOs and DONTs below. DO DONT Rinse the touchscreen with warm water prior to cleaning. Use the application of soap with a damp, lukewarm cloth. Airdry or wipe dry with a soft microfiber cloth to avoid scratches. Dont use abrasives, high alkaline cleaners, or gasoline to clean your lock. Dont apply cleaning deter-
gent directly in sunlight or at high temperatures. Dont leave cleaning deter-
gent on the display keypad for long periods of time - wash immediately. Dont use scrapers, squee-
gees, or razors. 38 SECTION 7.1 8.1 Safety Precautions Please read all instructions carefully. Remind all Lockly users of the safety precautions. Read the following instructions for your own safety Do not attempt to disassemble the smart lock by yourself. It can cause product damage, void warranty, and cause injuries. Do not use any inappropriate tools that can cause damages or malfunction to your lock. Always make sure your door is securely closed and locked when you leave your house to prevent unwanted entry. Please keep your Access Codes safe. Restrict access to the back panel of your smart lock and check your settings regularly to ensure Access Codes have not been changed without your knowledge. Always dispose of used batteries according to your local laws. DO NOT BURN. Unauthorized changes and modifications may void your product warranty. If you have questions or any problems while using your Lockly Secure Smart Lock, contact our customer service department at help@Lockly.com or visit http://lockly.com/help for technical assistance. SECTION 8.1 39 Certified Warning:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interfer-
ence that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. WARNING: This product contains DEHP and other chemicals known to the State of California to cause cancer and birth defects,or other reproductive harm. For more information go to www.P65Warnings.ca.gov SECURE Were here to help!
help@lockly.com https://lockly.com/help UMPGD82920191130 Lockly Smart Lock - Secure Lockly Smart Lock - Secure Plus Lockly Smart Lock - Secure Pro Lockly Smart Lock - Secure Lux U.S. Patent No. 9,665,706 Other Patents Pending With All Rights Reserved About Lockly Secure, Secure Plus, Secure Pro and Secure Lux About Lockly Secure, Secure Plus, Secure Pro and Secure Lux are keyless smart locks equipped with the patented PIN GenieTM, which is a peep proof and hidden camera proof algorithm software. Lockly makes your life easier and safer. For digital versions and instructional videos, please visit the following link:
http://lockly.com/help
This product uses the FCC Data API but is not endorsed or certified by the FCC