FCC ID: I2ODPA4040G PCS Dual Amplifier Booster/Combiner

by: Powerwave Technologies, Inc. latest update: 2003-07-17 model: DPA4040G

Three grants have been issued under this FCC ID from 03/10/2003 to 07/17/2003 (this is one of four releases in 2003 for this grantee). Public details available include manuals, internal & external photos, and frequency information. some products also feature user submitted or linked drivers, warrantee terms, password defaults, instructions, & troubleshooting guides.

permalink for this FCC identifier

search for: Repair details

from iFixIt

Trade-in? Recycling locations

eg for Slack usage

all	frequencies			exhibits	applications
		manuals

all exhibits 27
1 ~ 2003-07-17 10
2 ~ 2003-05-05 4
3 ~ 2003-03-10 14

app s				submitted / available
1 2 3	Users Manual	Users Manual	pdf	61.25 KiB	October 03 2003
1 2 3	Users Manual Revised	Users Manual	pdf	33.55 KiB
1 2 3		Test Report	pdf
1 2 3		Test Report	pdf
1 2 3		Cover Letter(s)	pdf
1 2 3		Cover Letter(s)	pdf
1 2 3		Cover Letter(s)	pdf
1 2 3		Cover Letter(s)	pdf
1 2 3		Cover Letter(s)	pdf
1 2 3		Test Setup Photos	pdf
1 2 3		Test Report	pdf
1 2 3		Cover Letter(s)	pdf		May 05 2003
1 2 3		Test Report	pdf		May 05 2003
1 2 3		Cover Letter(s)	pdf		May 05 2003
1 2 3		Cover Letter(s)	pdf		May 05 2003
1 2 3		Cover Letter(s)	pdf		October 03 2003
1 2 3		Cover Letter(s)	pdf		October 03 2003
1 2 3		Cover Letter(s)	pdf		October 03 2003
1 2 3		External Photos	pdf		October 03 2003
1 2 3		Attestation Statements	pdf		October 03 2003
1 2 3		Attestation Statements	pdf		October 03 2003
1 2 3		Test Report	pdf		October 03 2003
1 2 3		Internal Photos	pdf		October 03 2003
1 2 3		ID Label/Location Info	pdf		October 03 2003
1 2 3		Cover Letter(s)	pdf		October 03 2003
1 2 3		Test Report	pdf		October 03 2003
1 2 3		ID Label/Location Info	pdf		October 03 2003

exhibit
download
text

1 2 3

Users Manual

Users Manual

pdf

61.25 KiB

October 03 2003

350 West Java Drive Sunnyvale, CA. 94089 USERS MANUAL GSM Dual Amplifier Booster/ Combiner REMEC Model Number xxxxxxxxx User Manual REMECs GSM Dual Power Amplifier (GDPA) product consists of two low gain power amplifiers and a power combiner integrated into one compact housing capable of amplifying and / or combining one or two PCS 1900 GSM RF carriers. Two supplied user jumper cables allow the user to combine the 2 independent and isolated RF radio carriers into one common output port via the integrated power combiner. This option reduces the available output power for each RF carrier to 46 dBm per carrier, or a composite 2-

carrier power of 49 dBm. This mode of operation is noted as Combined Output Mode. The user has the option of removing the jumper cables and connecting directly to the two independent isolated output connectors of the Dual Power Amplifier. In this configuration, the output power for each output port is 49.5 dBm separately. This mode of operation is noted as Isolated Output Mode The GDPA has factory configurable gain only, so input power adjustments must be made by the user in order to adjust the output power. This product has integrated DC power-conditioning circuits, monitoring circuits, control circuits, digital interface circuits and fans. The available monitoring, control circuitry, and digital interface circuits can be factory configured to meet customer needs of capability and cost flexibility. The GDPA is a piece of a larger product solution that allows for up to 6 GPDAs to be placed in a common shelf side by side in a 19 inch Rack. The larger product solution consists of an AC to DC power rectifier and a cable kit to interface input signal, output signal, AC and DC power to OEM radio equipment. The larger product solution has an optional amplifier monitoring assembly that can interface to OEM base station alarms or local monitoring by means of a graphical user interface (GUI). The entire larger product solution is space efficient taking up 6RU high in a 19-inch rack. The following instructions should be followed when installing the unit for service:

1. Installation Instructions Apply a 28VDC input voltage to the DC Input connector of the GDPA Ensure that the DC Source is capable of delivering up to 17.6 Amps at 28VDC. Apply a GSM signal to each RF input port of the GDPA. Measure the RF output port to ensure the proper output power is present. GSM Booster Users Guide Page 1 of 3 350 West Java Drive Sunnyvale, CA. 94089 USERS MANUAL GSM Dual Amplifier Booster/ Combiner REMEC Model Number xxxxxxxxx Adjust the input power level to ensure the output power level is in compliance with the values indicated in Table 1 or Table 2 depending upon the mode of operation (Combined or Isolated).

(Note : The user must adjust the RF input power to the Booster Amplifier such that the RF output power level does not exceed the FCC certified power levels. The FCC certified power level is determined by the RF output spectral emissions to be compliant with the FCC spurious emissions limit of -13 dBm outside of the assigned frequency block. Near the block edges, the GMSK signal is such that the output power level must be further reduced so that the -13 dBm spurious level is not exceeded.) (These levels must not be exceeded for FCC compliance.) 2. Table 1: Maximum Combined Mode Output Power per Carrier Block Channel Center Frequency (MHz) Maximum RF Output Power per Carrier

(dBm) Combined Port Maximum RF Output Power per Carrier Combined

(W) Port A A A B B B C C C D D D E E E F F F 1930.4 - 1944.6 1950.4 - 1964.6 1975.4 - 1989.6 1945.4 - 1949.6 1965.4 - 1969.6 1930.2 1944.8 1950.2 1964.8 1975.2 1989.8 1945.2 1949.8 1965.2 1969.8 1970.2 1974.8 1970.4 - 1974.6 46 46 46 46 46 46 40 40 40 40 40 40 GSM Booster Users Guide Page 2 of 3 350 West Java Drive Sunnyvale, CA. 94089 USERS MANUAL GSM Dual Amplifier Booster/ Combiner REMEC Model Number xxxxxxxxx 3. Table 2: Maximum Isolated Mode Output Power Per Carrier Block Channel Center Frequency Maximum RF Output Power per Carrier

(dBm) Each Isolated Port Maximum RF Output Power per Carrier

(W) Each Isolated Port 1930.4 - 1944.6 1950.4 - 1964.6 1975.4 - 1989.6 1945.4 - 1949.6

(MHz) 1930.2 1944.8 1950.2 1964.8 1975.2 1989.8 1945.2 1949.8 1965.2 1969.8 1970.2 1974.8 1965.4 - 1969.6 1970.4 - 1974.6 A A A B B B C C C D D D E E E F F F 49.5 49.5 49.5 49.5 49.5 49.5 89 89 89 89 89 89 4. Tune-Up Procedure There are no user tunable components in the design so no Tune-up procedure is required. 5. FCC Part 24 compliance Changes or Modifications, not expressly approved by the manufacturer, could void the user's authority to operate the equipment. FCC rules for RF exposure require that the antenna connected to this GDPA equipment is fixed on an outdoor structure with a minimum separation distance of 2 meters between it and any person. GSM Booster Users Guide Page 3 of 3

exhibit
download
text

1 2 3

Users Manual Revised

Users Manual

pdf

33.55 KiB

1590 Buckeye Drive Milpitas, CA 95035 USER MANUAL PCS GSM and EDGE Dual Power Amplifier REMEC Model DPA-4040G DPA-4040G User Manual REMECs PCS GSM-EDGE Dual Power Amplifier Model DPA-4040G product consists of two power amplifiers and a power combiner integrated into one compact housing capable of amplifying and / or combining one or two PCS 1900 GSM or EDGE modulated RF carriers. GSM Modulation For GSM modulation, two supplied user jumper cables allow the user to combine the 2 independent and isolated RF radio carriers into one common output port via the integrated power combiner. This option reduces the available output power for each RF carrier to 46 dBm per carrier, or a composite 2- carrier power of 49 dBm. This mode of operation is noted as Combined Output Mode. For GSM modulation, the user has the option of removing the jumper cables and connecting directly to the two independent isolated output connectors of the Dual Power Amplifier. In this configuration, the output power for each output port is 49.5 dBm separately. This mode of operation is noted as Isolated Output Mode EDGE Modulation For EDGE modulation, two supplied user jumper cables allow the user to combine the 2 independent and isolated RF radio carriers into one common output port via the integrated power combiner. This option reduces the available output power for each RF carrier to 43 dBm per carrier, or a composite 2- carrier power of 46 dBm. This mode of operation is noted as Combined Output Mode. For EDGE modulation, the user has the option of removing the jumper cables and connecting directly to the two independent isolated output connectors of the Dual Power Amplifier. In this configuration, the output power for each output port is 46.5 dBm separately. This mode of operation is noted as Isolated Output Mode The DPA-4040G has factory configurable gain only, so input power adjustments must be made by the user in order to adjust the output power. This product has integrated DC power-conditioning circuits, monitoring circuits, control circuits, digital interface circuits and fans. The available monitoring, control circuitry, and digital interface circuits can be factory configured to meet customer needs of capability and cost flexibility. The DPA-4040G is a piece of a larger product solution that allows for up to 6 DPAs to be placed in a common shelf side by side in a 19 inch Rack. The larger product solution consists of an AC to DC power rectifier and a cable kit to interface input signal, output signal, AC and DC power to OEM radio equipment. The larger product solution has an optional Amplifier Monitoring Module DPA-4040G User Manual Rev 3 Page 1 of 1 1590 Buckeye Drive Milpitas, CA 95035 USER MANUAL PCS GSM and EDGE Dual Power Amplifier REMEC Model DPA-4040G

(AMM) that can interface to OEM base station alarms or local monitoring by means of a Graphical User Interface (GUI). The entire larger product solution is space efficient, consuming only 6RU of height in a 19-inch rack. The following instructions should be followed when installing the unit for service:

1. Installation Instructions 1.1 Apply a 28VDC input voltage to the DC Input connector of the DPA-4040G 1.2 Ensure that the DC Source is capable of delivering up to 19 Amps at 28VDC. 1.3 Apply either an Edge or GSM modulated signal to each RF input port of the DPA-4040G. 1.4 Measure the RF output port to ensure the proper output power is present. 1.5 For GSM Modulation, adjust the input power level to ensure the output power level is in compliance with the values indicated in Table 1 or Table 2 depending upon the mode of operation (Combined or Isolated). 1.6 For EDGE Modulation, adjust the input power level to ensure the output power level is in compliance with the values indicated in Table 3 or Table 4 depending upon the mode of operation (Combined or Isolated). 1.7 To comply with the FCC limits at the second harmonic, 15 dB minimum rejection must be provided between the DPA and free space. Any or all of the following system elements can be utilized to provide the required rejection:

1.7.1 A transmit filter 1.7.2 A transmit duplexer 1.7.3 An antenna feed with loss 1.7.4 Antenna pattern attenuation DPA-4040G User Manual Rev 3 Page 2 of 2 1590 Buckeye Drive Milpitas, CA 95035 USER MANUAL PCS GSM and EDGE Dual Power Amplifier REMEC Model DPA-4040G The user must adjust the RF input power to the Booster Amplifier such that the RF output power level does not exceed the FCC certified power levels. The FCC certified power level is determined by the RF output spectral emissions to be compliant with the FCC spurious emissions limit of -13 dBm outside of the assigned frequency block. Near the block edges, the EDGE and GMSK signal is such that the output power level must be further reduced so that the

-13 dBm spurious level is not exceeded. The other alternative that has been used with this amplifier is to adjust the channel center frequency until the amplifier is in compliance at the These levels must not be exceeded for FCC compliance. Note:

block edge. 2. Table 1: GSM Maximum Combined Mode Output Power per Carrier Block Channel Center Frequency Maximum RF Output Power per Carrier

(dBm) Maximum RF Output Power per Carrier Combined Port Combined Port A D B E F C 1930.4 - 1944.6 1945.4 - 1949.6 1950.4 - 1964.6 1965.4 - 1969.6 1970.4 - 1974.6 1975.4 - 1989.6

(MHz)

(MHz) A D B E F C 1930.4 - 1944.6 1945.4 - 1949.6 1950.4 - 1964.6 1965.4 - 1969.6 1970.4 - 1974.6 1975.4 - 1989.6 46 46 46 46 46 46 49.5 49.5 49.5 49.5 49.5 49.5

(W) 39.8 39.8 39.8 39.8 39.8 39.8

(W) 89.1 89.1 89.1 89.1 89.1 89.1 3. Table 2: GSM Maximum Combined Mode Output Power per Carrier Block Channel Center Frequency Maximum RF Output Power per Carrier

(dBm) Maximum RF Output Power per Carrier Combined Port Combined Port DPA-4040G User Manual Rev 3 Page 3 of 3 1590 Buckeye Drive Milpitas, CA 95035 USER MANUAL PCS GSM and EDGE Dual Power Amplifier REMEC Model DPA-4040G 4. Table 3: EDGE Maximum Combined Mode Output Power per Carrier Block Channel Center Frequency Maximum RF Output Power per Carrier

(dBm) Maximum RF Output Power per Carrier Each Isolated Each Isolated A D B E F C 1930.4 - 1944.6 1945.4 - 1949.6 1950.4 - 1964.6 1965.4 - 1969.6 1970.4 - 1974.6 1975.4 - 1989.6

(MHz)

(MHz) A D B E F C 1930.4 - 1944.6 1945.4 - 1949.6 1950.4 - 1964.6 1965.4 - 1969.6 1970.4 - 1974.6 1975.4 - 1989.6 Port 43.0 43.0 43.0 43.0 43.0 43.0 Port 46.5 46.5 46.5 46.5 46.5 46.5

(W) Port 20 20 20 20 20 20

(W) Port 44.7 44.7 44.7 44.7 44.7 44.7 5. Table 4: EDGE Maximum Isolated Mode Output Power Per Carrier Block Channel Center Frequency Maximum RF Output Power per Carrier

(dBm) Maximum RF Output Power per Carrier Each Isolated Each Isolated 6. Tune-Up Procedure There are no user tunable components in the design so no Tune-up procedure is required. 7. FCC Part 24 compliance Changes or Modifications, not expressly approved by the manufacturer, could void the user's authority to operate the equipment. FCC rules for RF exposure require that the antenna connected to this DPA-4040G equipment is fixed on an outdoor structure with a minimum separation distance of 2 meters between it and any person. DPA-4040G User Manual Rev 3 Page 4 of 4

		frequency	equipment class	purpose
1	2003-07-17	1930.3 ~ 1989.8	AMP - Amplifier	Class II permissive change or modification of presently authorized equipment
2	2003-05-05	1930.3 ~ 1989.8	AMP - Amplifier
3	2003-03-10	1930.2 ~ 1974.8	AMP - Amplifier	Original Equipment

Application Forms

app s	Applicant Information
1 2 3	Effective	2003-07-17
1 2 3		2003-05-05
1 2 3		2003-03-10
1 2 3	Applicant's complete, legal business name	Powerwave Technologies, Inc.
1 2 3	FCC Registration Number (FRN)	0006771059
1 2 3	Physical Address	1801 East Saint Andrew Place
1 2 3		Santa Ana, California 92705
1 2 3		United States

app s	TCB Information
1 2 3	TCB Application Email Address	h******@AmericanTCB.com
1 2 3	TCB Scope	B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27

app s	FCC ID
1 2 3	Grantee Code	I2O
1 2 3	Equipment Product Code	DPA4040G

app s	Person at the applicant's address to receive grant or for contact
1 2 3	Name	R**** B**
1 2 3	Title	Sr. Quality Engineer
1 2 3	Telephone Number	714-4********
1 2 3	Fax Number	714-4********
1 2 3	E-mail	r******@pwav.com

app s	Technical Contact
1 2 3	Firm Name	Elliott Laboratories Inc.
1 2 3	Firm Name	Elliott Laboratories, Inc.
1 2 3	Name	J** M****
1 2 3	Physical Address	684 West Maude Ave.
1 2 3		Sunnyvale, California 94085
1 2 3		United States
1 2 3	Telephone Number	408-2******** Extension:
1 2 3	Fax Number	408-2********
1 2 3	E-mail	d******@elliottlabs.com

app s	Non Technical Contact
1 2 3	Firm Name	Elliott Laboratories Inc.
1 2 3	Firm Name	Elliott Laboratories, Inc.
1 2 3	Name	J** M******
1 2 3	Physical Address	684 West Maude Ave.
1 2 3		Sunnyvale, California 94085
1 2 3		United States
1 2 3	Telephone Number	408-2******** Extension:
1 2 3	Fax Number	408-2********
1 2 3	Fax Number	408-2********
1 2 3	E-mail	d******@elliottlabs.com

app s	Confidentiality (long or short term)
1 2 3	Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:	No
1 2 3		Yes
1 2 3	Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:	No
	if no date is supplied, the release date will be set to 45 calendar days past the date of grant.

app s	Cognitive Radio & Software Defined Radio, Class, etc
1 2 3	Is this application for software defined/cognitive radio authorization?	No
1 2 3	Equipment Class	AMP - Amplifier
1 2 3	Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)	PCS Dual Amplifier Booster/Combiner
1 2 3		PCS Dual Amplifer Booster/Combiner
1 2 3	Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?	No
1 2 3	Modular Equipment Type	Does not apply
1 2 3	Purpose / Application is for	Class II permissive change or modification of presently authorized equipment
1 2 3	Purpose / Application is for	Original Equipment
1 2 3	Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?	No
1 2 3	Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?	No
1 2 3	Grant Comments	Power output listed is conducted for Isolated Output Mode. Emission listed represent GSM and EDGE operation. This device must be used with an external filter providing at least 15 dB additional attenuation at the second harmonic.
1 2 3	Grant Comments	Power output listed is conducted for Isolated Output Mode. This device must be used with an external filter providing at least 15 dB additional attenuation at the second harmonic.
1 2 3	Is there an equipment authorization waiver associated with this application?	No
1 2 3	If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?	No

app s	Test Firm Name and Contact Information
1 2 3	Firm Name	Elliott Laboratories LLC
1 2 3	Name	D** B******
1 2 3	Telephone Number	408-2********
1 2 3	Fax Number	408-2********
1 2 3	E-mail	d******@elliottlabs.com

Equipment Specifications
	Line	Rule Parts	Grant Notes	Lower Frequency	Upper Frequency	Power Output	Tolerance	Emission Designator	Microprocessor Number
1	1	24		1930.3	1989.8	89.1	Amp	GXW
1	2	24		1930.3	1989.8	44.7	Amp	G7W
	Line	Rule Parts	Grant Notes	Lower Frequency	Upper Frequency	Power Output	Tolerance	Emission Designator	Microprocessor Number
2	1	24		1930.30000000	1989.80000000	89.1000000	Amp	248KGXW
	Line	Rule Parts	Grant Notes	Lower Frequency	Upper Frequency	Power Output	Tolerance	Emission Designator	Microprocessor Number
3	1	24		1930.20000000	1974.80000000	89.1000000	Amp	GXW

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details