Qingdao Intelligent & Precise Electronics Co., Ltd ZDWFM2402 User Manual Product NameIEEE 802.11 b/g/n 2.4GHz 2T2R USB Module Model ZDWFM2402 1.Introduction Thank you for using the Wi-Fi module product provided by Qingdao Intelligent&Precise Electronics Co.,Ltd. Before use, please read this user manual carefully. Please follow the technical specifications when using the module in your design and develop activities. Qingdao Intelligent&Precise Electronics Co.,Ltd has the right to change the contents of this manual in accordance with the needs of the technical development. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. guidelines, place the product at least 20cm from nearby persons. for compliance could void the users authority to operate the equipment. Warning: Changes or modifications to this unit not expressly approved by the party responsible FCC RF Radiation Exposure Statement Caution: To maintain compliance with the FCCs RF exposure Host labeling requirement:Contains transmitter module FCC ID2AJVQ-ZDWFM2402 1 2Product Information 2.1 Product Information ZDWFM2402 wifi USB module is a wireless signal module device work at 2.4Ghz .ZDWFM2402 comply with IEEE 802.11b802.11 g and 802.11 n standardIt support up to 300Mbps physical layer transmitting rate. ZDWFM2402 support USB 2.0, which has up to 480Mbps data rate. ZDWFM2402 has 2T2R structure has 2 onboard Antenna. It could provide stable wireless link with high throughput ZDWFM2402 is a wireless WiFi signal module. It could transmit and receive WiFi wireless signal. It is widely used to multi-media device, such as smart TV. Equiped with ZDWFM2402, a smart TV could access to Wireless Local Network, which is also called WLAN or WIFI network. ZDWFM2402 helps multi-media device achieve to send&receive data package in a wireless way. 2.2 Feature IEEE standardIEEE 802.11b/g/n client operating Frequency 2.4Ghz support up to 300Mbps 2T2R mode support 20MHz/40MHz different bandwidth support USB 2.0 high data rate mode6-pin USB signal and power connector low power consumption support Wi-Fi direct link support WFA/ WPA/WPA2 /WPS2.0/WAPI security RoHs 2.3 MCU MAC /baseband/RFMT7603UN 3.Product Specification 3.1 Parameter WLAN Standard IEEE802.11b;IEEE802.11g;IEEE802.11n Data Interface universal Serial Bus(USB2.0) 2 Data rate Modulation Mode Channel 802.11b:11,5.5,2,1Mbps 802.11g:54,48,36,24,18,12,9,6,Mbps 802.11n:MCS 0 to 15 for HT20MHZ MCS 0 to 15 for HT40MHZ 802.11g/n---OFDM(BPSK,QPSK,16QAM,64QAM) 802.11b---CCK 11Mbps,5.5MbpQPSK 2Mbps BPSK 1Mbps 2.4GHz 11:(Ch.1-11)-United States 13:(Ch.1-13)-Europe 14: (Ch.1-14)-Japan 2.412~2.462 GHz- United States Working Frequency 2.412~2.484 GHz-Japan 2.412~2.472 GHz-Europe ETSI Typical Tx Power Receiver Sensitivity 802.11b(802.11 802.11g(802.11 802.11n CCK,11Mbps) OFDM,54Mbps) 13dBm@HT20 MCS0 16dBm 14dBm@54Mbps 13dBm@HT20 MCS15 12dBm@HT40 MCS0 12dBm@HT40 MCS15
-85dBm @ 11M(802.11b CCK,8% PER)
-65dBm @ 11M(802.11g OFDM,10% PER)
-64dBm @ MCS7(802.11n OFDM with 20MHz ,10% PER)
-61dBm @ MCS7(802.11n OFDM with 40MHz ,10% PER) Working Voltage 5V10% I/O supply voltage Antenna Gain 2dBi Antenna type 2 onboard Omni-directional antenna;
3.2 Working Temperature Storage Temperature min
-10
-40 max 70 125 4. Hardware information 4.1 structure dimensionmm PCB MaterialFR-4Surface treatmentOSP Appearance Dimensionmm40+/- 0.246.5+/- 0.2 PCB thickness1.0mm+/-0.15mm 3 4.2 PIN definition 4.3 Block Diagram BLOCK DIAGRAM 4 USB 2.0XP1ConnectorDC-DC ConverterSY8088SOT23-5U1MCUMT7603UNQFNU25V 3.3V40MHzXTAL1MatchCircuit Antenna ANT1MatchCircuit Antenna ANT1