FCC ID: 2AJVQ-7618BU ZDGFMT7618BU

by: Qingdao Intelligent&Precise Electronics Co.,Ltd latest update: 2017-12-05 model: 7618BU

Two grants have been issued under this FCC ID on 12/05/2017 (this is one of six releases in 2017 for this grantee). Public details available include manuals, internal & external photos, and frequency information. some products also feature user submitted or linked troubleshooting guides, password defaults, drivers, instructions, & warrantee terms.

permalink for this FCC identifier

search for: Repair details

from iFixIt

Replacement

on Amazon

Trade-in? Recycling locations

eg is reader-supported. when you buy through links on our site, we may earn an affiliate commission.

eg for Slack usage

all	frequencies		exhibits	applications
		manual

all exhibits 19
1 ~ 2017-12-05 12
2 ~ 2017-12-05 16

app s				submitted / available
1 2	User Manual Rev 1	Users Manual	pdf	616.86 KiB	May 12 2017
1 2		External Photos	pdf		May 12 2017
1 2		Test Report	pdf		May 12 2017
1 2		Test Report	pdf		May 12 2017
1 2		Test Report	pdf		May 12 2017
1 2		Cover Letter(s)	pdf		May 12 2017
1 2		Cover Letter(s)	pdf		May 12 2017
1 2		Internal Photos	pdf		May 12 2017
1 2		ID Label/Location Info	pdf		May 12 2017
1 2		Cover Letter(s)	pdf		May 12 2017
1 2		RF Exposure Info	pdf		May 12 2017
1 2		Test Setup Photos	pdf		May 12 2017
1 2		Test Report	pdf		May 12 2017
1 2		Test Report	pdf		May 12 2017
1 2		Test Report	pdf		May 12 2017
1 2		Test Report	pdf		May 12 2017
1 2		Test Report	pdf		May 12 2017
1 2		Test Report	pdf		May 12 2017
1 2		Test Report	pdf		May 12 2017

exhibit
download
text

1 2

User Manual Rev 1

Users Manual

pdf

616.86 KiB

May 12 2017

Qingdao Intelligent & Precise Electronics Co., Ltd ZDGFMT7618BU User Manual Product NameIEEE 802.11 a/b/g/n/ac 2.4GHz+5GHz 2T2R USB Module Model ZDGFMT7618BU 1. Introduction Thank you for using the Wi-Fi module product provided by Qingdao Intelligent &Precise Electronics Co., Ltd. Before use, please read this user manual carefully. Please follow the technical specifications when using the module in your design and develop activities. Qingdao Intelligent &Precise Electronics Co., Ltd has the right to change the contents of this manual in accordance with the needs of the technical development. FCC & IC application:

This device complies with Part 15 of the FCC Rules / Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. MPE Requirements To satisfy FCC / IC RF exposure requirements, a separation distance of 20 cm or more should be maintained between the antenna of this device and persons during device operation. To ensure compliance, operations at closer than this distance is not recommended. Les antennes installes doivent tre situes de facon ce que la population ne puisse y tre expose une distance de moin de 20 cm. Installer les antennes de facon ce que le personnel ne puisse approcher 20 cm ou moins de la position centrale de l antenne. La FCC des ltats-unis stipule que cet appareil doit tre en tout temps loign dau moins 20 cm des personnes pendant son functionnement. Region Selection Limited by local law regulations, version for North America does not have region selection option. 1 Label Host labeling requirement:Contains transmitter module FCC ID 2AJVQ-7618BU. Host labeling requirement:Contains transmitter module IC 22470-7618BU. 2Product Information 2.1 Product Information ZDGFMT7618BU Wi-Fi USB module is a wireless signal module device work at 2.4GHz(2.400 ~

2.4835GHz)/5GHz (5.150 ~ 5.85GHz) .ZDGFMT7618BU comply with IEEE 802.11a802.11b802.11 g 802.11 n and 802.11 ac standard. It support up to 867Mbps physical layer transmitting rate. ZDGFMT7618BU support USB 2.0, which has up to 480Mbps data rate. ZDGFMT7618BU has 2T2R structurehas two onboard PIFI Antenna. It could provide stable wireless link with high throughput. ZDGFMT7618BU is a wireless Wi-Fi signal module. It could transmit and receive Wi-Fi wireless signal device without radar detection It is widely used to multi-media device, such as smart TV.Equipped with ZDGFMT7618BU, a smart TV could access to Wireless Local Network, which is also called WLAN or WIFI network. ZDGFMT7618BU helps multi-media device achieve to send & receive data package in a wireless way. 2.2 Feature IEEE standardIEEE 802.11a/b/g/n/ac client device without radar detection operating Frequency 2.4GHz/5 GHz support up to 867Mbps 2T2R mode Support 20MHz, 40MHz, 80MHz in 5GHz band , and 20MHz, 40MHz band width in 2.4GHz band. support USB 2.0 high data rate mode,10-pin interface low power consumption support Wi-Fi direct link support WFA/ WPA/WPA2 /WPS2.0/WAPI security RoH MAC /baseband/RF MT7618BU 3. Product Specification 3.1 Parameter WLAN Standard IEEE802.11a/b/g/n/ac Data Interface USB2.0 Modulation Mode WIFI:

802.11b:CCK, DQPSK, DBPSK 2 Working Frequency Receiver Sensitivity 802.11a, 802.11g:64QAM, 16QAM, QPSK, BPSK 802.11n:64QAM, 16QAM, QPSK, BPSK 802.11ac:256QAM, 64QAM, 16QAM, QPSK, BPSK 2400-2483.5MHz for US and Canada 5150-5350MHz for US and Canada 5470-5725MHz for US and 5470-5580MHz,5660-5725MHz for Canada 5725-5850MHz for US and Canada 11b @ 11Mbps: (Max.) : -84dBm , (Typical) : -87dBm (PER<8%) 11g @ 54Mbps: (Max.) : -69dBm , (Typical) : -77dBm (PER<10%) 11n @ MCS7 (2.4g HT20): (Max.) : -67dBm , (Typical) : -73dBm (PER<10%) 11n @ MCS7 (2.4g HT40): (Max.) : -64dBm , (Typical) : -68dBm (PER<10%) 11a @ 54Mbps: (5g) : -69dBm , (Typical) : -77dBm (PER<10%) 11n @ MCS7 (5g HT20): (Max.) : -67dBm , (Typical) : -73dBm (PER<10%) 11n @ MCS7 (5g HT40): (Max.) : -64dBm , (Typical) : --69dBm (PER<10%) 11ac @ MCS9 (5g HT80): (Max.) : -51dBm , (Typical) : -58dBm (PER<10%) Working Voltage 5V10% I/O supply voltage Antenna Gain 2.4G :Ant0:2.17dBi ,Ant1:2.16dBi 5G: Ant0:3.07dBi ,Ant1:3.08dBi Antenna type Two onboard PIFI antennas Working Temperature

-10~+70 Storage Temperature

-40~+125 4. Hardware information 4.1 structure dimensionUnit:mm PCB MaterialFR-4Surface treatmentOSP. Appearance Dimensionmm40+/- 0.333+/- 0.3 PCB thickness1.0mm+/-0.15mm. Via4mm+/-0.15mm. Antenna Height3.3mm+/-0.15mm. 4.2 PIN definition NO 1 2 3 4 5 6 7 Description WIFI_REG_ON NC VCC BTDN BTDP GND 3D_SYNC 3 8 9 BT_REG_ON WLAN_DEV_WAKE 4.3 Block Diagram BLOCK DIAGRAM 5 EU single contact point Hisense Czech (Manufacture) s.r.o. U Nov Hospody 1164/4, 301 00 Plze ,Czech Republic. 6 Manufactures postal address No.218,Qianwangang Road, Qingdao Economic & Technological Development Zone,Shandong,China 7 Importers name & address The importer is not determined, the importers name and address will be declared in this user manual when the importer is determined. 4 USB 2.0XP1ConnectorDC-DC ConverterSOT23-5MCUMT7618BUQFN5V 3.3V40MHzXTAL12.4G TX0/RX0 Antenna ANT0 Antenna ANT15G TX0/RX0IPD2.4G TX1/RX15G TX1/RX1Diplexer

		frequency	equipment class	purpose
1	2017-12-05	2412 ~ 2462	DTS - Digital Transmission System	Original Equipment
2		5745 ~ 5825	NII - Unlicensed National Information Infrastructure TX

Application Forms

app s	Applicant Information
1 2	Effective	2017-12-05
1 2	Applicant's complete, legal business name	Qingdao Intelligent&Precise Electronics Co.,Ltd
1 2	FCC Registration Number (FRN)	0025785783
1 2	Physical Address	No218,Qianwangang Road
1 2		266071
1 2		Qingdao, N/A 266071
1 2		China

app s	TCB Information
1 2	TCB Application Email Address	h******@acbcert.com
1 2	TCB Scope	A4: UNII devices & low power transmitters using spread spectrum techniques

app s	FCC ID
1 2	Grantee Code	2AJVQ
1 2	Equipment Product Code	7618BU

app s	Person at the applicant's address to receive grant or for contact
1 2	Name	C****** L**
1 2	Title	Engineer
1 2	Telephone Number	53280********
1 2	Fax Number	53286********
1 2	E-mail	l******@hisense.com

app s	Technical Contact
1 2	Firm Name	Intertek Testing Services Limited Shanghai
1 2	Name	W****** W**
1 2	Name	N****** L**
1 2	Physical Address	Building No.86, 1198 Qinzhou Road(North)
1 2		Shanghai, 200233
1 2		China
1 2	Telephone Number	86-21********
1 2	Fax Number	86-21********
1 2	E-mail	w******@intertek.com

app s	Non Technical Contact
		n/a

app s	Confidentiality (long or short term)
1 2	Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:	Yes
1 2	Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:	No
	if no date is supplied, the release date will be set to 45 calendar days past the date of grant.

app s	Cognitive Radio & Software Defined Radio, Class, etc
1 2	Is this application for software defined/cognitive radio authorization?	No
1 2	Equipment Class	DTS - Digital Transmission System
1 2	Equipment Class	NII - Unlicensed National Information Infrastructure TX
1 2	Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)	ZDGFMT7618BU
1 2	Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?	No
1 2	Modular Equipment Type	Single Modular Approval
1 2	Purpose / Application is for	Original Equipment
1 2	Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?	Yes
1 2	Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?	No
1 2	Grant Comments	Output power listed is conducted. Modular Approval. Device is a 802.11 b/g/n device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz and 40 MHz bandwidth modes. This device contains a 5G WLAN transmitter.
1 2	Grant Comments	Output power listed is conducted. Modular Approval. Device is a 802.11 a/n/ac device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes. This device contains a 2.4G WLAN transmitter.
1 2	Is there an equipment authorization waiver associated with this application?	No
1 2	If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?	No

app s	Test Firm Name and Contact Information
1 2	Firm Name	Intertek Testing Services Shanghai
1 2	Name	L** X****
1 2	Telephone Number	+86 2********
1 2	E-mail	l******@intertek.com

Equipment Specifications
	Line	Rule Parts	Grant Notes	Lower Frequency	Upper Frequency	Power Output	Tolerance	Emission Designator	Microprocessor Number
1	1	15C	CC MO	2412.00000000	2462.00000000	0.0420000
	Line	Rule Parts	Grant Notes	Lower Frequency	Upper Frequency	Power Output	Tolerance	Emission Designator	Microprocessor Number
2	1	15E	38 CC MO	5180	5240	0.051
2	2	15E	38 CC MO ND	5260	5320	0.044
2	3	15E	38 CC MO ND	5500	5700	0.052
2	4	15E	38 CC MO	5745	5825	0.081

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details