FCC ID: PPD-QCNFA354 802.11 a/b/g/n/ac+ BT 4.1 M.2 2226 Type Card

by: Qualcomm Atheros, Inc. latest update: 2015-01-27 model: QCNFA354

Fifteen grants have been issued under this FCC ID from 08/06/2014 to 01/27/2015 (this is one of one hundred and forty-one releases in 2015 for this grantee). Public details available include manuals, frequency information, and internal & external photos. some products also feature user submitted or linked password defaults, drivers, warrantee terms, troubleshooting guides, & instructions.
permalink for this FCC identifier
search for: Repair details
from iFixIt
Replacement
on Amazon
Trade-in? Recycling locations
eg is reader-supported. when you buy through links on our site, we may earn an affiliate commission.
|
|
|   
eg for Slack usage
app s submitted / available
various User Manual 1 Users Manual pdf 5.36 MiB
various User Manual 2 Users Manual pdf 5.61 MiB
various User Manual 3 Users Manual pdf 4.30 MiB
various User manual Users Manual pdf 4.36 MiB
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various External Photos pdf
various Internal Photos pdf
various ID Label/Location Info pdf
various RF Exposure Info pdf
various Attestation Statements pdf
various Cover Letter(s) pdf
various Test Setup Photos pdf
various Cover Letter(s) pdf November 12 2014
various Cover Letter(s) pdf November 12 2014
various Cover Letter(s) pdf November 12 2014
various External Photos pdf November 12 2014
various Internal Photos pdf November 12 2014
various ID Label/Location Info pdf November 12 2014
various Cover Letter(s) pdf November 12 2014
various Cover Letter(s) pdf November 12 2014
various RF Exposure Info pdf November 12 2014
various Test Setup Photos pdf November 12 2014
various Parts List/Tune Up Info pdf November 12 2014
various ID Label/Location Info pdf November 12 2014
various Parts List/Tune Up Info pdf November 12 2014
various RF Exposure Info pdf November 12 2014
various Test Setup Photos pdf November 12 2014
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf May 08 2014 / June 08 2014
various Test Report pdf May 08 2014 / June 08 2014
various Test Setup Photos pdf May 08 2014
various Cover Letter(s) pdf May 08 2014 / June 08 2014
various Test Setup Photos pdf May 08 2014
various RF Exposure Info pdf May 08 2014 / June 08 2014
various Test Report pdf May 08 2014 / June 08 2014
various Test Report pdf May 08 2014 / June 08 2014
various Test Report pdf May 08 2014 / June 08 2014
various Cover Letter(s) pdf May 08 2014 / June 08 2014
various Test Report pdf May 08 2014 / June 08 2014
various Cover Letter(s) pdf May 08 2014 / June 08 2014
various Cover Letter(s) pdf May 08 2014 / June 08 2014
various Test Report pdf May 08 2014 / June 08 2014
various Test Report pdf May 08 2014 / June 08 2014
various User Manual 1 Users Manual pdf 5.36 MiB
various User Manual 2 Users Manual pdf 5.61 MiB
various User Manual 3 Users Manual pdf 4.30 MiB
various User manual Users Manual pdf 4.36 MiB

frequency equipment class purpose
1 2015-01-27 2422 ~ 2452 DTS - Digital Transmission System Class II permissive change or modification of presently authorized equipment
2 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
3 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
4 2014-12-11 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
5 2422 ~ 2452 DTS - Digital Transmission System
6 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
7 2422 ~ 2452 DTS - Digital Transmission System
8 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
9 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
10 2014-08-29 2422 ~ 2452 DTS - Digital Transmission System
11 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
12 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
13 2014-08-06 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX Original Equipment
14 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
15 2422 ~ 2452 DTS - Digital Transmission System

Application Forms

app s Applicant Information
various Effective 2015-01-27
various 2014-12-11
various 2014-08-29
various 2014-08-06
various Applicant's complete, legal business name Qualcomm Atheros, Inc.
various FCC Registration Number (FRN) 0003716743
various Physical Address 1700 Technology Dr
various San Jose, California 95110
various United States
app s TCB Information
various TCB Application Email Address L******@ul.com
various TCB Scope A4: UNII devices & low power transmitters using spread spectrum techniques
app s FCC ID
various Grantee Code PPD
various Equipment Product Code QCNFA354
app s Person at the applicant's address to receive grant or for contact
various Name P****** G****
various Title Vice President, Regulatory Engineering
various Telephone Number 858-6********
various Fax Number 858-6********
various E-mail p******@qti.qualcomm.com
app s Technical Contact
n/a
app s Non Technical Contact
n/a
app s Confidentiality (long or short term)
various Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousLong-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousIf so, specify the short-term confidentiality release date (MM/DD/YYYY format)07/26/2015
various01/25/2015
various10/13/2014
various09/20/2014
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
various Is this application for software defined/cognitive radio authorization?No
variousEquipment ClassDTS - Digital Transmission System
variousNII - Unlicensed National Information Infrastructure TX
variousDSS - Part 15 Spread Spectrum Transmitter
variousDescription of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)802.11 a/b/g/n/ac+ BT 4.1 M.2 2226 Type Card
various802.11 a/b/g/n/ac+BT 4.1 M.2 2226 Type Card
variousRelated OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?No
variousModular Equipment TypeSingle Modular Approval
variousPurpose / Application is forClass II permissive change or modification of presently authorized equipment
variousOriginal Equipment
variousComposite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?Yes
variousRelated Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
variousGrant CommentsClass II permissive change to allow use in a portable Samsung Notebook with the antennas and power reduction documented in this filing. The highest reported SAR value in this filing is 0.70W/kg. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 2cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value across all filings under this FCC ID is 0.70 W/Kg.
variousClass II permissive change to allow use in a portable Samsung Notebook with the antennas and power reduction documented in this filing. The highest reported SAR value in this filing is 1.07W/kg. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 2cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value across all filings under this FCC ID is 1.07 W/Kg.
variousClass II permissive change to allow use in portable Samsung Notebook with the antennas and power reduction documented in this filing. Output power is conducted. This module may be installed only by the OEM or an OEM integrator.
variousClass II permissive change to allow use in portable Samsung Notebook with the antennas documented in this filing. Output power is conducted. This module may be installed only by the OEM or an OEM integrator.
variousClass II permissive change to allow use in a portable Samsung Notebook with the antennas as documented in this filing. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 2cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values in this filing for stand-alone and simultaneous transmission exposure conditions are 0.66 W/kg and 1.21 W/kg respectively. The highest reported SAR values across all filings under this FCC ID for stand-alone and simultaneous transmission exposure conditions are 0.66 W/Kg and 1.27 W/kg respectively.
variousClass II permissive change to allow use in portable Samsung Notebook with the antennas documented in this filing. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 2cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values in this filing for stand-alone and simultaneous transmission exposure conditions are 0.61 W/kg and 0.97 W/kg respectively. The highest reported SAR values across all filings under this FCC ID for stand-alone and simultaneous transmission exposure conditions are 1.04 W/Kg and 1.27 W/kg respectively.
variousClass II permissive change to allow use in Samsung Notebook with the antennas documented in this filing. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 2cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values in this filing for body and simultaneous exposure conditions are 0.50 W/Kg and 0.92 W/Kg respectively. The highest reported SAR values across all filings under this FCC ID for body and simultaneous exposure conditions are 0.50 W/Kg and 1.27 W/Kg respectively.
variousClass II permissive change to allow use in Samsung Notebook with the antennas documented in this filing. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 2cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values in this filing for body and simultaneous exposure conditions are 1.04W/kg and 1.27 W/Kg respectively. The highest reported SAR values across all filings under this FCC ID for body and simultaneous exposure conditions are 1.04 W/Kg and 1.27 W/Kg respectively.
variousClass II permissive change to allow use in Samsung Notebook with the antennas documented in this filing. Output power is conducted. This module may be installed only by the OEM or an OEM integrator.
variousClass II permissive change to allow use in portable host Samsung Notebook Model NP370E5J and NP370E5Q with the antennas documented in this filing. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 2cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported 1-g body SAR for stand-alone and simultaneous transmission exposure conditions are 0.18W/kg and 1.27W/kg, respectively.
variousClass II permissive change to allow use in portable host Samsung Notebook Model NP370E5J and NP370E5Q with the antennas documented in this filing. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 2cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported 1-g body SAR for stand-alone and simultaneous transmission exposure conditions are 0.78W/kg and 1.27W/kg, respectively.
variousClass II permissive change to allow use in portable host Samsung Notebook Model NP370E5J and NP370E5Q with the antennas documented in this filing. Output power is conducted. This module may be installed only by the OEM or an OEM integrator.
variousOutput power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 2cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 0.51W/kg and 0.61W/kg, respectively.
variousOutput power is conducted. This module may be installed only by the OEM or an OEM integrator.
variousOutput power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 2cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value was < 0.1W/Kg.
variousIs there an equipment authorization waiver associated with this application?No
variousIf there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
various Firm Name SGS KOREA CO., Ltd.
various SGS Korea Co., Ltd
various Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch
various Name J**** J********
various J******** C****
various R**** C******
various Telephone Number 82-31********
various 82-31********
various 886-3******** Extension:
various Fax Number 82-31********
various +82-3********
various 886 3********
various E-mail j******@sgs.com
various K******@sgs.com
various r******@tw.bureauveritas.com
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 15C 36 CC MO 2412 2462 0.574
1 2 15C 36 CC MO 2422 2452 0.398
1 3 15C 36 CC 2402 2480 0.002
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 15E 36 38 CC MO 5180 5240 0.1586
2 2 15E 36 38 CC MO 5260 5320 0.1531
2 3 15E 36 38 CC MO 5500 5720 0.1563
2 4 15E 36 38 CC MO 5745 5825 0.1461
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 15C 36 CC 2402.00000000 2480.00000000 0.0120000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
4 1 15C CC 2402.00000000 2480.00000000 0.0120000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
5 1 15C CC MO 2412 2462 0.574
5 2 15C CC MO 2422 2452 0.398
5 3 15C CC MO 2402 2480 0.002
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
6 1 15E 38 CC MO 5180 5240 0.1586
6 2 15E 38 CC MO 5260 5320 0.1531
6 3 15E 38 CC MO 5500 5720 0.1563
6 4 15E 38 CC MO 5745 5825 0.1461
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
7 1 15C CC MO 2412 2462 0.574
7 2 15C CC MO 2422 2452 0.398
7 3 15C CC MO 2402 2480 0.002
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
8 1 15E 38 CC MO 5180 5240 0.1586
8 2 15E 38 CC MO 5260 5320 0.1531
8 3 15E 38 CC MO 5500 5720 0.1563
8 4 15E 38 CC MO 5745 5825 0.1461
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
9 1 15C CC 2402.00000000 2480.00000000 0.0120000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
10 1 15C CC MO 2412 2462 0.574
10 2 15C CC MO 2422 2452 0.398
10 3 15C CC MO 2402 2480 0.002
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
11 1 15E 38 CC MO 5180 5240 0.1586
11 2 15E 38 CC MO 5260 5320 0.1531
11 3 15E 38 CC MO 5500 5720 0.1563
11 4 15E 38 CC MO 5745 5825 0.1461
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
12 1 15C CC 2402.00000000 2480.00000000 0.0120000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
13 1 15E 38 CC MO 5180 5240 0.1586
13 2 15E 38 CC MO 5260 5320 0.1531
13 3 15E 38 CC MO 5500 5720 0.1563
13 4 15E 38 CC MO 5745 5825 0.1461
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
14 1 15C CC 2402.00000000 2480.00000000 0.0120000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
15 1 15C CC MO 2412 2462 0.574
15 2 15C CC MO 2422 2452 0.398
15 3 15C CC MO 2402 2480 0.002

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC