FCC ID: PPD-QCNFA344AH 802.11a/b/g/n/ac + BT 4.1 M.2 2230 Type Card

by: Qualcomm Atheros, Inc. latest update: 2021-04-12 model: QCNFA344AH

Two Hundred And Ninety One grants have been issued under this FCC ID from 05/28/2015 to 04/12/2021 (this is one of forty-two releases in 2021 for this grantee). Public details available include frequency information, internal & external photos, and manuals. some products also feature user submitted or linked troubleshooting guides, drivers, password defaults, instructions, & warrantee terms.
permalink for this FCC identifier
search for: Repair details
from iFixIt
Replacement
on Amazon
Trade-in? Recycling locations
eg is reader-supported. when you buy through links on our site, we may earn an affiliate commission.
|
|
|   
eg for Slack usage
app s submitted / available
various Host UserMan Users Manual pdf 913.51 KiB February 09 2021 / August 08 2021 delayed release
various Host UserMan FCC statement Users Manual pdf 153.80 KiB April 12 2021 / October 09 2021 delayed release
various Host UserMan QSG Users Manual pdf 1.34 MiB March 29 2021 / September 25 2021 delayed release
various Host UserMan QSG Inspiron 14 5410 Users Manual pdf 382.68 KiB April 12 2021 / October 09 2021 delayed release
various Host UserMan QSG Inspiron 14 5418 Users Manual pdf 382.71 KiB April 12 2021 / October 09 2021 delayed release
various Host UserMan QSG Inspiron 15 5510 Users Manual pdf 422.82 KiB April 12 2021 / October 09 2021 delayed release
various Host UserMan QSG Inspiron 15 5515 Users Manual pdf 1.06 MiB April 12 2021 / October 09 2021 delayed release
various Host UserMan QSG Inspiron 15 5518 Users Manual pdf 423.05 KiB April 12 2021 / October 09 2021 delayed release
various Host UserMan QSG Vostro 14 5410 Users Manual pdf 1.07 MiB April 12 2021 / October 09 2021 delayed release
various Host UserMan QSG Vostro 15 5510 Users Manual pdf 1.07 MiB April 12 2021 / October 09 2021 delayed release
various Host UserMan QSG Vostro 15 5515 Users Manual pdf 1.06 MiB April 12 2021 / October 09 2021 delayed release
various Host UserMan RG Users Manual pdf 5.56 MiB February 09 2021 / August 08 2021 delayed release
various Host UserMan Regulatory Inspiron 14 5410 & 5418 Users Manual pdf 1.36 MiB April 12 2021 / October 09 2021 delayed release
various Host UserMan Regulatory Inspiron 15 5510 & 5518 Users Manual pdf 1.35 MiB April 12 2021 / October 09 2021 delayed release
various Host UserMan Regulatory Inspiron 15 5515 Users Manual pdf 1.33 MiB April 12 2021 / October 09 2021 delayed release
various Host UserMan Regulatory Vostro 14 5410 Users Manual pdf 1.35 MiB April 12 2021 / October 09 2021 delayed release
various Host UserMan Regulatory Vostro 15 5510 Users Manual pdf 1.35 MiB April 12 2021 / October 09 2021 delayed release
various Host UserMan Regulatory Vostro 15 5515 Users Manual pdf 1.33 MiB April 12 2021 / October 09 2021 delayed release
various Host UserMan Safety and Regulatory Users Manual pdf 1017.73 KiB March 29 2021 / September 25 2021 delayed release
various Host UserMan Safety and Regulatory Information Users Manual pdf 1017.74 KiB April 12 2021 / October 09 2021 delayed release
various User Manua Statement Part 1 Users Manual pdf 3.65 MiB February 02 2021 / July 30 2021 delayed release
various User Manual Statement Part 2 Users Manual pdf 4.73 MiB February 02 2021 / July 30 2021 delayed release
various Users Manual Users Manual pdf 2.97 MiB February 02 2021 / July 30 2021 delayed release
various Host IntPho Internal Photos pdf 976.27 KiB March 29 2021 / September 25 2021 delayed release
various IntPho Internal Photos pdf 1.44 MiB February 09 2021 / August 08 2021 delayed release
various IntPho P106F Internal Photos pdf 4.23 MiB April 12 2021 / October 09 2021 delayed release
various IntPho P143G Internal Photos pdf 2.24 MiB April 12 2021 / October 09 2021 delayed release
various Internal Photos Internal Photos pdf 1.68 MiB February 02 2021 / July 30 2021 delayed release
various Internal Photos 20201102 v1 - STC Internal Photo Internal Photos pdf 980.94 KiB December 22 2020 / June 27 2021 delayed release
various ExtPho External Photos pdf 1.93 MiB February 09 2021 / August 08 2021 delayed release
various ExtPho P106F External Photos pdf 3.07 MiB April 12 2021 / October 09 2021 delayed release
various ExtPho P143G External Photos pdf 3.59 MiB April 12 2021 / October 09 2021 delayed release
various External Photos External Photos pdf 1.16 MiB February 02 2021 / July 30 2021 delayed release
various External Photos 20201102 v1 - STC External Photo External Photos pdf 892.33 KiB December 22 2020 / June 27 2021 delayed release
various Host ExtPho External Photos pdf 1.71 MiB March 29 2021 / September 25 2021 delayed release
various Host Label Info ID Label/Location Info pdf 204.03 KiB March 29 2021
various Host Label Info P106F ID Label/Location Info pdf 204.03 KiB April 12 2021
various Host Label Info P106F P143G ID Label/Location Info pdf 204.04 KiB April 12 2021
various Host Label Info P106F Justification of Labeling ID Label/Location Info pdf 95.90 KiB April 12 2021
various ID Label & Location Info. 20201102 v1 - Label & location ID Label/Location Info pdf 64.18 KiB December 22 2020 / December 29 2020
various Justification of Labeling P143G ID Label/Location Info pdf 136.83 KiB April 12 2021
various Label Sample & Label Location rev ID Label/Location Info pdf 972.93 KiB February 02 2021
various Antenna Report SPEED Craft P143G Operational Description pdf April 12 2021 confidential
various Antenna Report SPEED GEO P143G Operational Description pdf April 12 2021 confidential
various Antenna Report WNC Craft P143G Operational Description pdf April 12 2021 confidential
various Antenna Report WNC GEO P143G Operational Description pdf April 12 2021 confidential
various RFExp P143G RF Exposure Info pdf 1.30 MiB April 12 2021
various RFExp P143G Appendix A RF Exposure Info pdf 751.77 KiB April 12 2021
various RFExp P143G Appendix B RF Exposure Info pdf 994.82 KiB April 12 2021
various RFExp P143G Appendix C RF Exposure Info pdf 2.92 MiB April 12 2021
various Tsup FCC RFExp P143G Test Setup Photos pdf 28.34 KiB April 12 2021 / October 09 2021 delayed release
various Tuning Power-P143G Parts List/Tune Up Info pdf April 12 2021 confidential
various cvrltr Class II Permissive Change Cover Letter(s) pdf 147.74 KiB April 12 2021
various cvrltr FCC Confidentiality Request Cover Letter(s) pdf 133.83 KiB April 12 2021
various cvrltr FCC LOA Cover Letter(s) pdf 17.98 KiB April 12 2021
various Power of Attorney Letter Cover Letter(s) pdf 181.14 KiB April 12 2021
various Antenna Report SPEED Craft Operational Description pdf April 12 2021 confidential
various Antenna Report SPEED GEO Operational Description pdf April 12 2021 confidential
various Antenna Report WNC Craft Operational Description pdf April 12 2021 confidential
various Antenna Report WNC GEO Operational Description pdf April 12 2021 confidential
various RFExp P106F RF Exposure Info pdf 1.31 MiB April 12 2021
various RFExp P106F Appendix A RF Exposure Info pdf 762.38 KiB April 12 2021
various RFExp P106F Appendix B RF Exposure Info pdf 959.93 KiB April 12 2021
various RFExp P106F Appendix C RF Exposure Info pdf 2.92 MiB April 12 2021
various Tsup FCC RFExp P106F Test Setup Photos pdf 29.67 KiB April 12 2021 / October 09 2021 delayed release
various TunePro Parts List/Tune Up Info pdf April 12 2021 confidential
various TunePro P106F Parts List/Tune Up Info pdf April 12 2021 confidential
various Antenna Report HB Operational Description pdf March 29 2021 confidential
various Antenna Report WNC Operational Description pdf March 29 2021 confidential
various Class II Permissive Change Cover Letter(s) pdf 147.73 KiB March 29 2021
various Confidentiality Request Cover Letter(s) pdf 133.83 KiB March 29 2021
various FCC LOA Cover Letter(s) pdf 17.98 KiB March 29 2021
various Power of Attorney Letter Cover Letter(s) pdf 172.16 KiB March 29 2021
various RFExp P146G RF Exposure Info pdf 1.35 MiB March 29 2021
various RFExp P146G Appendix A RF Exposure Info pdf 762.40 KiB March 29 2021
various RFExp P146G Appendix B RF Exposure Info pdf 981.03 KiB March 29 2021
various RFExp P146G Appendix C RF Exposure Info pdf 2.93 MiB March 29 2021
various Tsup FCC RFExp Test Setup Photos pdf 23.88 KiB March 29 2021 / September 25 2021 delayed release
various Tuning Power Parts List/Tune Up Info pdf March 29 2021 confidential
various Antenna Report AWAN Operational Description pdf February 09 2021 confidential
various Antenna Report High-tek Operational Description pdf February 09 2021 confidential
various FCC RFExp RF Exposure Info pdf 1.23 MiB February 09 2021
various FCC RFExp Appendix A RF Exposure Info pdf 1.27 MiB February 09 2021
various FCC RFExp Appendix B RF Exposure Info pdf 773.92 KiB February 09 2021
various FCC RFExp Appendix C RF Exposure Info pdf 3.23 MiB February 09 2021
various long and short term confidentility Cover Letter(s) pdf 162.88 KiB February 09 2021
various Test Setup Photos Test Setup Photos pdf 107.01 KiB February 09 2021 / August 08 2021 delayed release
various Antenna Spec.- HighTek Operational Description pdf February 02 2021 confidential
various Antenna Spec.- Mag.Layers Operational Description pdf February 02 2021 confidential
various C2PC letter Description of Change Cover Letter(s) pdf 169.34 KiB February 02 2021
various Cover Letter(s) pdf 18.54 KiB February 02 2021
various Power Measure Report rev4 Test Report pdf 91.87 KiB February 02 2021
various RF Exposure Info [SAR] rev5 RF Exposure Info pdf 3.98 MiB February 02 2021
various RSE Justification Letter Cover Letter(s) pdf 137.17 KiB February 02 2021
various SAR Test Set Up Photos Test Setup Photos pdf 372.96 KiB February 02 2021 / July 30 2021 delayed release
various Tune Up Procedure rev Parts List/Tune Up Info pdf February 02 2021 confidential
various Attestations 20201102 v1 - Form FCC RSE justification letter Cover Letter(s) pdf 138.32 KiB December 22 2020 / December 29 2020
various Cover Letters 20201102 v1 - Form FCC agent authorization Cover Letter(s) pdf 252.08 KiB December 22 2020 / December 29 2020
various Cover Letters 20201102 v1 - Form FCC long and short term confidentility Cover Letter(s) pdf 139.88 KiB December 22 2020 / December 29 2020
various Cover Letters 20201111 v1 - Form FCC C2PC request form ver01 Cover Letter(s) pdf 117.97 KiB December 22 2020 / December 29 2020
various Test Setup Photos 20201102 v1 - STC EN202080005 FCC SAR Appendix A Photographs Test Setup Photos pdf 514.24 KiB December 22 2020 / June 27 2021 delayed release
various Host UserMan Users Manual pdf 913.51 KiB February 09 2021 / August 08 2021 delayed release
various Host UserMan FCC statement Users Manual pdf 153.80 KiB April 12 2021 / October 09 2021 delayed release
various Host UserMan QSG Users Manual pdf 1.34 MiB March 29 2021 / September 25 2021 delayed release
various Host UserMan QSG Inspiron 14 5410 Users Manual pdf 382.68 KiB April 12 2021 / October 09 2021 delayed release
various Host UserMan QSG Inspiron 14 5418 Users Manual pdf 382.71 KiB April 12 2021 / October 09 2021 delayed release
various Host UserMan QSG Inspiron 15 5510 Users Manual pdf 422.82 KiB April 12 2021 / October 09 2021 delayed release
various Host UserMan QSG Inspiron 15 5515 Users Manual pdf 1.06 MiB April 12 2021 / October 09 2021 delayed release
various Host UserMan QSG Inspiron 15 5518 Users Manual pdf 423.05 KiB April 12 2021 / October 09 2021 delayed release
various Host UserMan QSG Vostro 14 5410 Users Manual pdf 1.07 MiB April 12 2021 / October 09 2021 delayed release
various Host UserMan QSG Vostro 15 5510 Users Manual pdf 1.07 MiB April 12 2021 / October 09 2021 delayed release
various Host UserMan QSG Vostro 15 5515 Users Manual pdf 1.06 MiB April 12 2021 / October 09 2021 delayed release
various Host UserMan RG Users Manual pdf 5.56 MiB February 09 2021 / August 08 2021 delayed release
various Host UserMan Regulatory Inspiron 14 5410 & 5418 Users Manual pdf 1.36 MiB April 12 2021 / October 09 2021 delayed release
various Host UserMan Regulatory Inspiron 15 5510 & 5518 Users Manual pdf 1.35 MiB April 12 2021 / October 09 2021 delayed release
various Host UserMan Regulatory Inspiron 15 5515 Users Manual pdf 1.33 MiB April 12 2021 / October 09 2021 delayed release
various Host UserMan Regulatory Vostro 14 5410 Users Manual pdf 1.35 MiB April 12 2021 / October 09 2021 delayed release
various Host UserMan Regulatory Vostro 15 5510 Users Manual pdf 1.35 MiB April 12 2021 / October 09 2021 delayed release
various Host UserMan Regulatory Vostro 15 5515 Users Manual pdf 1.33 MiB April 12 2021 / October 09 2021 delayed release
various Host UserMan Safety and Regulatory Users Manual pdf 1017.73 KiB March 29 2021 / September 25 2021 delayed release
various Host UserMan Safety and Regulatory Information Users Manual pdf 1017.74 KiB April 12 2021 / October 09 2021 delayed release
various User Manua Statement Part 1 Users Manual pdf 3.65 MiB February 02 2021 / July 30 2021 delayed release
various User Manual Statement Part 2 Users Manual pdf 4.73 MiB February 02 2021 / July 30 2021 delayed release
various Users Manual Users Manual pdf 2.97 MiB February 02 2021 / July 30 2021 delayed release
various Host IntPho Internal Photos pdf 976.27 KiB March 29 2021 / September 25 2021 delayed release
various IntPho Internal Photos pdf 1.44 MiB February 09 2021 / August 08 2021 delayed release
various IntPho P106F Internal Photos pdf 4.23 MiB April 12 2021 / October 09 2021 delayed release
various IntPho P143G Internal Photos pdf 2.24 MiB April 12 2021 / October 09 2021 delayed release
various Internal Photos Internal Photos pdf 1.68 MiB February 02 2021 / July 30 2021 delayed release
various Internal Photos 20201102 v1 - STC Internal Photo Internal Photos pdf 980.94 KiB December 22 2020 / June 27 2021 delayed release
various ExtPho External Photos pdf 1.93 MiB February 09 2021 / August 08 2021 delayed release
various ExtPho P106F External Photos pdf 3.07 MiB April 12 2021 / October 09 2021 delayed release
various ExtPho P143G External Photos pdf 3.59 MiB April 12 2021 / October 09 2021 delayed release
various External Photos External Photos pdf 1.16 MiB February 02 2021 / July 30 2021 delayed release
various External Photos 20201102 v1 - STC External Photo External Photos pdf 892.33 KiB December 22 2020 / June 27 2021 delayed release
various Host ExtPho External Photos pdf 1.71 MiB March 29 2021 / September 25 2021 delayed release
various Host Label Info ID Label/Location Info pdf 204.03 KiB March 29 2021
various Host Label Info P106F ID Label/Location Info pdf 204.03 KiB April 12 2021
various Host Label Info P106F P143G ID Label/Location Info pdf 204.04 KiB April 12 2021
various Host Label Info P106F Justification of Labeling ID Label/Location Info pdf 95.90 KiB April 12 2021
various ID Label & Location Info. 20201102 v1 - Label & location ID Label/Location Info pdf 64.18 KiB December 22 2020 / December 29 2020
various Justification of Labeling P143G ID Label/Location Info pdf 136.83 KiB April 12 2021
various Label Sample & Label Location rev ID Label/Location Info pdf 972.93 KiB February 02 2021
various RFExp P143G RF Exposure Info pdf 1.30 MiB April 12 2021
various RFExp P143G Appendix A RF Exposure Info pdf 751.77 KiB April 12 2021
various RFExp P143G Appendix B RF Exposure Info pdf 994.82 KiB April 12 2021
various RFExp P143G Appendix C RF Exposure Info pdf 2.92 MiB April 12 2021
various Tsup FCC RFExp P143G Test Setup Photos pdf 28.34 KiB April 12 2021 / October 09 2021 delayed release
various cvrltr Class II Permissive Change Cover Letter(s) pdf 147.74 KiB April 12 2021
various cvrltr FCC Confidentiality Request Cover Letter(s) pdf 133.83 KiB April 12 2021
various cvrltr FCC LOA Cover Letter(s) pdf 17.98 KiB April 12 2021
various Power of Attorney Letter Cover Letter(s) pdf 181.14 KiB April 12 2021
various RFExp P106F RF Exposure Info pdf 1.31 MiB April 12 2021
various RFExp P106F Appendix A RF Exposure Info pdf 762.38 KiB April 12 2021
various RFExp P106F Appendix B RF Exposure Info pdf 959.93 KiB April 12 2021
various RFExp P106F Appendix C RF Exposure Info pdf 2.92 MiB April 12 2021
various Tsup FCC RFExp P106F Test Setup Photos pdf 29.67 KiB April 12 2021 / October 09 2021 delayed release
various Class II Permissive Change Cover Letter(s) pdf 147.73 KiB March 29 2021
various Confidentiality Request Cover Letter(s) pdf 133.83 KiB March 29 2021
various FCC LOA Cover Letter(s) pdf 17.98 KiB March 29 2021
various Power of Attorney Letter Cover Letter(s) pdf 172.16 KiB March 29 2021
various RFExp P146G RF Exposure Info pdf 1.35 MiB March 29 2021
various RFExp P146G Appendix A RF Exposure Info pdf 762.40 KiB March 29 2021
various RFExp P146G Appendix B RF Exposure Info pdf 981.03 KiB March 29 2021
various RFExp P146G Appendix C RF Exposure Info pdf 2.93 MiB March 29 2021
various Tsup FCC RFExp Test Setup Photos pdf 23.88 KiB March 29 2021 / September 25 2021 delayed release
various FCC RFExp RF Exposure Info pdf 1.23 MiB February 09 2021
various FCC RFExp Appendix A RF Exposure Info pdf 1.27 MiB February 09 2021
various FCC RFExp Appendix B RF Exposure Info pdf 773.92 KiB February 09 2021
various FCC RFExp Appendix C RF Exposure Info pdf 3.23 MiB February 09 2021
various long and short term confidentility Cover Letter(s) pdf 162.88 KiB February 09 2021
various Test Setup Photos Test Setup Photos pdf 107.01 KiB February 09 2021 / August 08 2021 delayed release
various C2PC letter Description of Change Cover Letter(s) pdf 169.34 KiB February 02 2021
various Cover Letter(s) pdf 18.54 KiB February 02 2021
various Power Measure Report rev4 Test Report pdf 91.87 KiB February 02 2021
various RF Exposure Info [SAR] rev5 RF Exposure Info pdf 3.98 MiB February 02 2021
various RSE Justification Letter Cover Letter(s) pdf 137.17 KiB February 02 2021
various SAR Test Set Up Photos Test Setup Photos pdf 372.96 KiB February 02 2021 / July 30 2021 delayed release
various Attestations 20201102 v1 - Form FCC RSE justification letter Cover Letter(s) pdf 138.32 KiB December 22 2020 / December 29 2020
various Cover Letters 20201102 v1 - Form FCC agent authorization Cover Letter(s) pdf 252.08 KiB December 22 2020 / December 29 2020
various Cover Letters 20201102 v1 - Form FCC long and short term confidentility Cover Letter(s) pdf 139.88 KiB December 22 2020 / December 29 2020
various Cover Letters 20201111 v1 - Form FCC C2PC request form ver01 Cover Letter(s) pdf 117.97 KiB December 22 2020 / December 29 2020
various Test Setup Photos 20201102 v1 - STC EN202080005 FCC SAR Appendix A Photographs Test Setup Photos pdf 514.24 KiB December 22 2020 / June 27 2021 delayed release

frequency equipment class purpose
1 2021-04-12 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX Class II Permissive Change
2 2422 ~ 2462 DTS - Digital Transmission System
3 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
4 2422 ~ 2462 DTS - Digital Transmission System
5 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
6 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
7 2021-03-29 2422 ~ 2462 DTS - Digital Transmission System
8 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
9 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
10 2021-02-09 2422 ~ 2462 DTS - Digital Transmission System
11 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
12 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
13 2021-02-02 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX Class II permissive change or modification of presently authorized equipment
14 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
15 2422 ~ 2462 DTS - Digital Transmission System
16 2020-12-29 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter Class II Permissive Change
17 2422 ~ 2462 DTS - Digital Transmission System
18 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
19 2020-10-27 2422 ~ 2462 DTS - Digital Transmission System
20 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
21 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
22 2020-10-23 2422 ~ 2462 DTS - Digital Transmission System
23 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
24 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
25 2020-10-16 2422 ~ 2462 DTS - Digital Transmission System
26 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
27 2422 ~ 2462 DTS - Digital Transmission System
28 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
29 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
30 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
31 2020-06-30 2422 ~ 2462 DTS - Digital Transmission System
32 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
33 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
34 2020-06-23 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
35 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
36 2422 ~ 2462 DTS - Digital Transmission System
37 2020-05-28 2422 ~ 2462 DTS - Digital Transmission System
38 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
39 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
40 2422 ~ 2462 DTS - Digital Transmission System
41 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
42 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
43 2020-05-20 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
44 2422 ~ 2462 DTS - Digital Transmission System
45 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
46 2020-04-20 2422 ~ 2462 DTS - Digital Transmission System
47 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
48 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
49 2020-04-13 2422 ~ 2462 DTS - Digital Transmission System
50 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
51 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
52 2020-04-10 2422 ~ 2462 DTS - Digital Transmission System
53 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
54 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
55 2020-04-06 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
56 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
57 2422 ~ 2462 DTS - Digital Transmission System
58 2020-03-12 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
59 2422 ~ 2462 DTS - Digital Transmission System
60 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
61 2020-03-04 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
62 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
63 2422 ~ 2452 DTS - Digital Transmission System
64 2020-02-02 2422 ~ 2452 DTS - Digital Transmission System Class II permissive change or modification of presently authorized equipment
65 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
66 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
67 2019-11-11 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX Class II Permissive Change
68 2019-09-27 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
69 2422 ~ 2462 DTS - Digital Transmission System
70 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
71 2019-08-16 2422 ~ 2462 DTS - Digital Transmission System
72 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
73 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
74 2019-05-29 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX Class II permissive change or modification of presently authorized equipment
75 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
76 2422 ~ 2452 DTS - Digital Transmission System
77 2019-05-23 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
78 2412 ~ 2472 DTS - Digital Transmission System
79 5190 ~ 5230 NII - Unlicensed National Information Infrastructure TX
80 2019-05-16 2422 ~ 2462 DTS - Digital Transmission System
81 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
82 5210 ~ 5210 NII - Unlicensed National Information Infrastructure TX
83 2019-04-30 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
84 5180 ~ 5240 NII - Unlicensed National Information Infrastructure TX
85 2422 ~ 2462 DTS - Digital Transmission System
86 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
87 2402 ~ 2480 DTS - Digital Transmission System
88 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
89 5530 ~ 5690 NII - Unlicensed National Information Infrastructure TX
90 5530 ~ 5690 NII - Unlicensed National Information Infrastructure TX
91 2422 ~ 2462 DTS - Digital Transmission System
92 2019-04-23 2422 ~ 2462 DTS - Digital Transmission System
93 5500 ~ 5720 NII - Unlicensed National Information Infrastructure TX
94 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
95 2019-04-09 2402 ~ 2408 DSS - Part 15 Spread Spectrum Transmitter
96 2422 ~ 2452 DTS - Digital Transmission System
97 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
98 2019-03-27 5530 ~ 5690 NII - Unlicensed National Information Infrastructure TX
99 5500 ~ 5720 NII - Unlicensed National Information Infrastructure TX
100 2422 ~ 2462 DTS - Digital Transmission System
101 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
102 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
103 2422 ~ 2462 DTS - Digital Transmission System
104 2019-03-12 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
105 2412 ~ 2472 DTS - Digital Transmission System
106 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
107 2019-03-05 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
108 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
109 2412 ~ 2472 DTS - Digital Transmission System
110 2422 ~ 2462 DTS - Digital Transmission System
111 5530 ~ 5690 NII - Unlicensed National Information Infrastructure TX
112 2422 ~ 2462 DTS - Digital Transmission System
113 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
114 5500 ~ 5720 NII - Unlicensed National Information Infrastructure TX
115 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
116 2019-02-19 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
117 5500 ~ 5720 NII - Unlicensed National Information Infrastructure TX
118 2412 ~ 2472 DTS - Digital Transmission System
119 2019-01-30 2422 ~ 2462 DTS - Digital Transmission System
120 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
121 5180 ~ 5240 NII - Unlicensed National Information Infrastructure TX
122 2018-12-10 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
123 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
124 2422 ~ 2452 DTS - Digital Transmission System
125 2018-10-31 2422 ~ 2462 DTS - Digital Transmission System
126 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
127 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
128 2018-10-30 2422 ~ 2462 DTS - Digital Transmission System
129 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
130 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
131 2018-08-30 2422 ~ 2462 DTS - Digital Transmission System
132 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
133 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
134 2422 ~ 2462 DTS - Digital Transmission System
135 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
136 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
137 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
138 2422 ~ 2462 DTS - Digital Transmission System
139 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
140 2018-07-23 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
141 2422 ~ 2462 DTS - Digital Transmission System
142 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
143 2018-06-28 2422 ~ 2452 DTS - Digital Transmission System
144 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
145 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
146 2018-05-24 2422 ~ 2462 DTS - Digital Transmission System
147 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
148 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
149 2018-02-08 2422 ~ 2462 DTS - Digital Transmission System
150 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
151 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
152 2018-01-09 2422 ~ 2462 DTS - Digital Transmission System
153 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
154 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
155 2017-12-29 2422 ~ 2462 DTS - Digital Transmission System
156 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
157 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
158 2017-12-19 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
159 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
160 2422 ~ 2452 DTS - Digital Transmission System
161 2017-11-22 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
162 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
163 2422 ~ 2452 DTS - Digital Transmission System
164 2017-09-30 2422 ~ 2452 DTS - Digital Transmission System
165 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
166 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
167 2017-09-29 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
168 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
169 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
170 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
171 2422 ~ 2462 DTS - Digital Transmission System
172 2422 ~ 2452 DTS - Digital Transmission System
173 2017-08-30 2422 ~ 2452 DTS - Digital Transmission System
174 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
175 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
176 2017-08-24 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
177 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
178 2422 ~ 2462 DTS - Digital Transmission System
179 2017-08-15 2422 ~ 2462 DTS - Digital Transmission System
180 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
181 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
182 2017-08-14 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
183 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
184 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
185 2412 ~ 2472 DTS - Digital Transmission System
186 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
187 2412 ~ 2472 DTS - Digital Transmission System
188 2017-07-13 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
189 2422 ~ 2452 DTS - Digital Transmission System
190 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
191 2017-06-14 2422 ~ 2452 DTS - Digital Transmission System
192 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
193 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
194 2017-04-07 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
195 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
196 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
197 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
198 2422 ~ 2452 DTS - Digital Transmission System
199 2422 ~ 2452 DTS - Digital Transmission System
200 2017-02-16 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
201 2422 ~ 2452 DTS - Digital Transmission System
202 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
203 2017-01-17 2422 ~ 2462 DTS - Digital Transmission System
204 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
205 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
206 2017-01-05 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
207 2422 ~ 2462 DTS - Digital Transmission System
208 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
209 2016-10-25 2422 ~ 2452 DTS - Digital Transmission System
210 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
211 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
212 2016-10-24 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
213 2422 ~ 2452 DTS - Digital Transmission System
214 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
215 2016-09-27 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
216 2422 ~ 2452 DTS - Digital Transmission System
217 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
218 2016-09-22 2422 ~ 2452 DTS - Digital Transmission System
219 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
220 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
221 2016-09-02 2422 ~ 2452 DTS - Digital Transmission System
222 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
223 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
224 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
225 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
226 2422 ~ 2462 DTS - Digital Transmission System
227 2016-09-01 2422 ~ 2462 DTS - Digital Transmission System
228 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
229 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
230 2016-08-31 2422 ~ 2452 DTS - Digital Transmission System
231 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
232 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
233 2016-08-30 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
234 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
235 2422 ~ 2452 DTS - Digital Transmission System
236 2016-08-05 2422 ~ 2452 DTS - Digital Transmission System
237 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
238 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
239 2016-08-03 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
240 2422 ~ 2452 DTS - Digital Transmission System
241 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
242 2016-07-26 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
243 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
244 2422 ~ 2452 DTS - Digital Transmission System
245 2016-07-23 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
246 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
247 2422 ~ 2452 DTS - Digital Transmission System
248 2016-07-08 2422 ~ 2462 DTS - Digital Transmission System
249 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
250 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
251 2016-07-01 2422 ~ 2462 DTS - Digital Transmission System
252 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
253 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
254 2016-05-12 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
255 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
256 2422 ~ 2452 DTS - Digital Transmission System
257 2016-05-05 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
258 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
259 2422 ~ 2452 DTS - Digital Transmission System
260 2016-04-22 5775 ~ 5795 DTS - Digital Transmission System
261 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
262 5775 ~ 5795 DTS - Digital Transmission System
263 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
264 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
265 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
266 2016-04-11 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
267 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
268 5775 ~ 5795 DTS - Digital Transmission System
269 2016-03-15 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
270 5775 ~ 5795 DTS - Digital Transmission System
271 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
272 2015-11-03 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
273 2422 ~ 2462 DTS - Digital Transmission System
274 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
275 2015-10-19 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
276 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
277 5775 ~ 5775 DTS - Digital Transmission System
278 2422 ~ 2462 DTS - Digital Transmission System
279 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
280 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
281 2015-09-09 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
282 5530 ~ 5690 NII - Unlicensed National Information Infrastructure TX
283 5530 ~ 5690 NII - Unlicensed National Information Infrastructure TX
284 5775 ~ 5775 DTS - Digital Transmission System
285 5775 ~ 5775 DTS - Digital Transmission System
286 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
287 2015-08-21 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
288 2015-05-28 5530 ~ 5690 NII - Unlicensed National Information Infrastructure TX Original Equipment
289 JBP - Part 15 Class B Computing Device Peripheral
290 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
291 5775 ~ 5775 DTS - Digital Transmission System

Application Forms

app s Applicant Information
various Effective 2021-04-12
various 2021-03-29
various 2021-02-09
various 2021-02-02
various 2020-12-29
various 2020-10-27
various 2020-10-23
various 2020-10-16
various 2020-06-30
various 2020-06-23
various 2020-05-28
various 2020-05-20
various 2020-04-20
various 2020-04-13
various 2020-04-10
various 2020-04-06
various 2020-03-12
various 2020-03-04
various 2020-02-02
various 2019-11-11
various 2019-09-27
various 2019-08-16
various 2019-05-29
various 2019-05-23
various 2019-05-16
various 2019-04-30
various 2019-04-23
various 2019-04-09
various 2019-03-27
various 2019-03-12
various 2019-03-05
various 2019-02-19
various 2019-01-30
various 2018-12-10
various 2018-10-31
various 2018-10-30
various 2018-08-30
various 2018-07-23
various 2018-06-28
various 2018-05-24
various 2018-02-08
various 2018-01-09
various 2017-12-29
various 2017-12-19
various 2017-11-22
various 2017-09-30
various 2017-09-29
various 2017-08-30
various 2017-08-24
various 2017-08-15
various 2017-08-14
various 2017-07-13
various 2017-06-14
various 2017-04-07
various 2017-02-16
various 2017-01-17
various 2017-01-05
various 2016-10-25
various 2016-10-24
various 2016-09-27
various 2016-09-22
various 2016-09-02
various 2016-09-01
various 2016-08-31
various 2016-08-30
various 2016-08-05
various 2016-08-03
various 2016-07-26
various 2016-07-23
various 2016-07-08
various 2016-07-01
various 2016-05-12
various 2016-05-05
various 2016-04-22
various 2016-04-11
various 2016-03-15
various 2015-11-03
various 2015-10-19
various 2015-09-09
various 2015-08-21
various 2015-05-28
various Applicant's complete, legal business name Qualcomm Atheros, Inc.
various FCC Registration Number (FRN) 0003716743
various Physical Address 1700 Technology Dr
various San Jose, CA
various San Jose, California 95110
various San Jose
various San Jose, 95110
various United States
app s TCB Information
various TCB Application Email Address L******@ul.com
various t******@us.bureauveritas.com
various l******@ul.com
various L******@ul.com
various c******@curtis-straus.com
various TCB Scope A4: UNII devices & low power transmitters using spread spectrum techniques
various A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
app s FCC ID
various Grantee Code PPD
various Equipment Product Code QCNFA344AH
app s Person at the applicant's address to receive grant or for contact
various Name P**** G****
various Title Vice President, Regulatory Engineering
various Telephone Number 858-6********
various Fax Number 858-6********
various E-mail p******@qti.qualcomm.com
app s Technical Contact
various Firm Name Bureau Veritas Consumer Products Services (H.K.) L
various UL Verification Services (Guangzhou) Co., Ltd., So
various Sporton International Inc.
various Bureau Veritas Consumer Products Services
various CERPASS TECHNOLOGY (SUZHOU)CO., LTD
various Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch
various Shenzhen Balun Technology Co., Ltd.
various Cerpass Technology (Suzhou) Co.,Ltd
various SGS Taiwan Ltd.
various Compliance Certification Services Inc.
various Bureau Veritas Consumer Products Services Electric
various Bureau Veritas Consumer Products Services (H.K.)
various Name A****** W******
various V******** G******
various J**** H******
various I****** C****
various I**** C****
various S******** Y********
various A******** C********
various X****** W******
various I****** L******
various M**** T******
various A****** L********
various T****** K******
various M**** S******
various J**** T******
various A******** H******
various V**** T******
various Physical Address No.19, Hwa Ya 2nd Rd., Kwei Shan Dist.
various Building 10, Innovation Technology Park, Song Shan
various No. 52, Huaya 1st Rd., Guishan Dist.
various No.19, Hwa Ya 2nd Rd., Wen Hwa Vil. Kwei Shan Dist
various No.66,Tangzhuang Road
various No.19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dis
various Block B, 1st FL, Baisha Science and Technology Par
various No.52, HwaYa 1st Rd., Kwei-Shan Hsiang
various No.19, Hwa Ya 2nd Rd.
various No.66, Tangzhuang Road
various No.134, Wu Kung Road
various NO. 11, Wu-Gong 6th Rd., Wugu District
various No.134, Wu Kung Road, New Taipei Industrial Park
various No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen
various Taoyuan, 33383
various Dongguan, 523808
various Taoyuan City, 33383
various Taoyuan, 333
various Suzhou, Jiangsu
various Suzhou, Jiangsu, 94538
various Taoyuan City
various Taoyuan City, 518055
various Shenzhen, 518055
various Taoyuan Hsien, 333
various Suzhou, 215006
various New Taipei City, 24803
various New Taipei City, 24891
various New Taipei City
various New Taipei City, 516-0021
various New Taipei City, 16675
various Hsin Chu Hsien, 307
various Hsin Chu Hsien
various Taiwan
various China
various Telephone Number 88633********
various 886 (********
various +86 0********
various 886-3********
various 886-3********
various 886-3********
various 0512-******** Extension:
various 886-3********
various 886-3******** Extension:
various 86-75******** Extension:
various 86-75********
various 886-3******** Extension:
various 0512-********
various 0512-******** Extension:
various 86-51********
various 86-51******** Extension:
various 886 2******** Extension:
various 886 2********
various 886-2******** Extension:
various 886-2********
various 886-3******** Extension:
various 886-2******** Extension:
various 886-2********
various 886-2******** Extension:
various 886 (********
various Fax Number 886-3********
various 886-3********
various 886-3********
various 0512-********
various 886-3********
various 86-75********
various 86-51********
various 886 2********
various 886-2********
various 886-2********
various 886-2********
various 886 (********
various E-mail a******@bureauveritas.com
various v******@ul.com
various J******@bureauveritas.com
various i******@sporton.com.tw
various I******@tw.bureauveritas.com
various s******@cerpass.net;QCARG@qti.qualcomm.com
various A******@tw.bureauveritas.com,QCARG@qti.qualcom
various x******@baluntek.com,QCARG@qti.qualcom
various M******@tw.bureauveritas.com,QCARG@qti.qualcom
various s******@cerpass.net,QCARG@qti.qualcomm.com
various a******@cerpass.net;QCARG@qti.qualcomm.com
various t******@sgs.com;QCARG@qti.qualcomm.com
various Q******@qti.qualcomm.com,application@ccsrf.com
various E******@sporton.com.tw;Iris@sporton.com.tw
various A******@sgs.com
various v******@sgs.com
various a******@tw.bureauveritas.com
various a******@tw.bureauveritas.co
app s Non Technical Contact
various Firm Name Bureau Veritas Consumer Products Services
various CERPASS TECHNOLOGY (SUZHOU)CO., LTD
various Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch
various Shenzhen Balun Technology Co., Ltd.
various Sporton International Inc.
various Cerpass Technology (Suzhou) Co.,Ltd
various SGS Taiwan Ltd.
various Compliance Certification Services Inc.
various Bureau Veritas Consumer Products Services Electric
various Bureau Veritas Consumer Products Services (H.K.)
various Name I**** C********
various S**** Y********
various A******** C******
various X**** W****
various I**** L******
various M**** T****
various A****** L******
various A******** A****
various M**** S********
various J******** T******
various A******** H****
various V******** T********
various A****** W****
various Physical Address No.19, Hwa Ya 2nd Rd., Wen Hwa Vil. Kwei Shan Dist
various No.66,Tangzhuang Road
various No.19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dis
various Block B, 1st FL, Baisha Science and Technology Par
various No.52, HwaYa 1st Rd., Kwei-Shan Hsiang
various No.19, Hwa Ya 2nd Rd.
various No.66, Tangzhuang Road
various No.134, Wu Kung Road
various NO. 11, Wu-Gong 6th Rd., Wugu District
various No.134, Wu Kung Road, New Taipei Industrial Park
various No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen
various Taoyuan, 33383
various Suzhou, Jiangsu
various Suzhou, Jiangsu, 94538
various Taoyuan City
various Taoyuan City, 518055
various Shenzhen, 518055
various Taoyuan Hsien, 333
various Taoyuan City, 33383
various Suzhou, 215006
various New Taipei City, 24803
various New Taipei City, 24891
various New Taipei City
various New Taipei City, 516-0021
various Hsin Chu Hsien, 307
various Hsin Chu Hsien
various Taiwan
various China
various Telephone Number +886-********
various 0512-********
various 0512-******** Extension:
various 886-3********
various 886-3******** Extension:
various 86-75******** Extension:
various 86-75********
various 886-3********
various 886-3******** Extension:
various 0512-********
various 0512-******** Extension:
various 86-51********
various 886 2********
various 886-2********
various 886-2********
various 886-2********
various 886 (********
various Fax Number 0512-********
various 886-3********
various 86-75********
various 886-3********
various 86-51********
various 886 2********
various 886-2********
various 886-2********
various 886-2********
various 886 (********
various E-mail I******@tw.bureauveritas.com
various s******@cerpass.net;QCARG@qti.qualcomm.com
various A******@tw.bureauveritas.com,QCARG@qti.qualcom
various x******@baluntek.com,QCARG@qti.qualcom
various M******@tw.bureauveritas.com,QCARG@qti.qualcom
various s******@cerpass.net,QCARG@qti.qualcomm.com
various a******@cerpass.net;QCARG@qti.qualcomm.com
various t******@sgs.com;QCARG@qti.qualcomm.com
various Q******@qti.qualcomm.com,application@ccsrf.com
various E******@sporton.com.tw;Iris@sporton.com.tw
various A******@sgs.com
various v******@sgs.com
various a******@tw.bureauveritas.com
various a******@tw.bureauveritas.co
app s Confidentiality (long or short term)
various Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousLong-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousNo
variousIf so, specify the short-term confidentiality release date (MM/DD/YYYY format)10/09/2021
various09/25/2021
various08/08/2021
various07/30/2021
various06/27/2021
various03/03/2021
various01/27/2021
various04/14/2021
various12/27/2020
various12/20/2020
various11/24/2020
various11/16/2020
various10/17/2020
various10/10/2020
various09/28/2020
various10/03/2020
various09/08/2020
various03/31/2020
various03/08/2020
various05/09/2020
various03/25/2020
various02/12/2020
various11/26/2019
various11/19/2019
various11/12/2019
various05/03/2019
various10/27/2019
various10/26/2019
various10/20/2019
various10/06/2019
various09/23/2019
various09/08/2019
various09/01/2019
various08/18/2019
various07/29/2019
various06/08/2019
various11/02/2018
various08/31/2018
various01/19/2019
various02/11/2018
various01/12/2018
various06/27/2018
various06/17/2018
various05/20/2018
various03/29/2018
various10/04/2017
various10/24/2017
various02/12/2018
various09/05/2017
various01/14/2018
various12/27/2017
various12/11/2017
various04/17/2017
various02/26/2017
various07/16/2017
various07/04/2017
various04/05/2017
various04/07/2017
various03/26/2017
various03/21/2017
various03/01/2017
various02/27/2017
various02/01/2017
various01/30/2017
various01/22/2017
various01/19/2017
various01/04/2017
various11/08/2016
various11/01/2016
various10/18/2016
various09/26/2016
various08/19/2016
various05/01/2016
various04/09/2016
various04/16/2016
various02/25/2016
various03/07/2016
various09/30/2015
various06/30/2015
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
various Is this application for software defined/cognitive radio authorization?No
variousEquipment ClassNII - Unlicensed National Information Infrastructure TX
variousDTS - Digital Transmission System
variousDSS - Part 15 Spread Spectrum Transmitter
variousJBP - Part 15 Class B Computing Device Peripheral
variousDescription of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)802.11a/b/g/n/ac + BT 4.1 M.2 2230 Type Card
various802.11a/b/g/n/ac+ BT 4.1 M.2 2230 Type Card
variousIdeaPad Flex 3 11ADA05
various802.11 a/b/g/n/ac + BT 4.1 M.2 2230 Type Card
various802.11a/b/g/n/ac + BT4.1 M.2 2230 Type Card
various802.11a/b/g/n/ac + BT 4.1 M.2 2230 Type
various802.11a/b/g/n/ac+ BT 4.1 M.2 2230 Type Card
various802.11 A/B/G/N/AC+ BT 4.1 M.2 2230 TYPE CARD
various02.11a/b/g/n/ac + BT 4.1 M.2 2230 Type Card
various802.11 A/B/G/N/AC+ BT4.1 M.2 2230 TYPE CARD
various802.11a/b/g/n/ac + BT 401 M.2 2230 Type Card
various802.11 a/b/g/n/ac + BT 4.1 M.2 2230 Type Car
variousRelated OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?No
variousModular Equipment TypeSingle Modular Approval
variousDoes not apply
variousPurpose / Application is forClass II Permissive Change
variousClass II permissive change or modification of presently authorized equipment
variousOriginal Equipment
variousComposite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?Yes
variousRelated Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
variousGrant CommentsClass II permissive change to add the specific portable host (Dell P143G) with new antenna and power reduction as documented in this filing. The highest reported SAR value for body and simultaneous transmission exposure conditions are 1.11 W/Kg and 1.17 W/Kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.40 W/Kg and 1.59 W/Kg respectively. Modular Approval. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Dell P143G) with new antenna and power reduction as documented in this filing. The highest reported SAR value for body and simultaneous transmission exposure conditions are 0.82 W/Kg and 0.87 W/Kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.37 W/Kg and 1.54 W/Kg respectively. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Dell P106F) with new antenna and power reduction as documented in this filing. The highest reported SAR value for body and simultaneous transmission exposure conditions are <0.1 W/Kg and 0.85 W/Kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.16 W/Kg and 1.48 W/Kg respectively. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Dell P106F) with new antenna and power reduction as documented in this filing. The highest reported SAR value for body and simultaneous transmission exposure conditions are 0.62 W/Kg and 0.67 W/Kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.37 W/Kg and 1.54 W/Kg respectively. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Dell P106F) with new antenna and power reduction as documented in this filing. The highest reported SAR value for body and simultaneous transmission exposure conditions are 0.80 W/Kg and 0.85 W/Kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.40 W/Kg and 1.59 W/Kg respectively. Modular Approval. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Dell P143G) with new antenna and power reduction as documented in this filing. The highest reported SAR value for body and simultaneous transmission exposure conditions are 0.14 W/Kg and 1.17 W/Kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.16 W/Kg and 1.48 W/Kg respectively. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Dell P146G) with new antenna and power reduction as documented in this filing. The highest reported SAR value for body-worn accessory and simultaneous transmission exposure conditions are 0.62 W/Kg and 0.72 W/Kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.37 W/Kg and 1.54 W/Kg respectively. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Dell P146G) with new antenna and power reduction as documented in this filing. The highest reported SAR value for body-worn accessory and simultaneous transmission exposure conditions are 0.10 W/Kg and 0.75 W/Kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.16 W/Kg and 1.48 W/Kg respectively. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Dell P146G) with new antenna and power reduction as documented in this filing. The highest reported SAR value for body-worn accessory and simultaneous transmission exposure conditions are 0.65 W/Kg and 0.75 W/Kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.40 W/Kg and 1.59 W/Kg respectively. Modular Approval. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Lenovo Notebook Computer IdeaPad Flex 5 15ALC05) with new antenna and power reduction as documented in this filing. The highest reported SAR value for body-worn accessory is 1.16 W/Kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.37 W/Kg and 1.54 W/Kg respectively. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Lenovo Notebook Computer IdeaPad Flex 5 15ALC05) with new antenna and power reduction as documented in this filing. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.16 W/Kg and 1.48 W/Kg respectively. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Lenovo Notebook Computer IdeaPad Flex 5 15ALC05) with new antenna and power reduction as documented in this filing. The highest reported SAR value for body-worn accessory is 1.18 W/Kg. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.40 W/Kg and 1.59 W/Kg respectively. Modular Approval. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II Permissive Change to allow use in portable laptop/notebook host Lenovo IdeaPad 5 Pro 14ACN6. The highest reported SAR for body and simultaneous conditions in this filing are 0.88 W/kg and 0.88 W/kg, respectively. Output power is reduced when the module is installed in this host as documented in this filing. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.40 W/Kg and 1.59 W/Kg respectively.
variousClass II Permissive Change to allow use in portable laptop/notebook host Lenovo IdeaPad 5 Pro 14ACN6. The highest reported SAR for body and simultaneous conditions in this filing are <0.10 W/kg and 0.88 W/kg, respectively. Output power is reduced when the module is installed in this host as detailed in this filing. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.16 W/Kg and 1.48 W/Kg respectively.
variousClass II Permissive Change to allow use in portable laptop/notebook host Lenovo IdeaPad 5 Pro 14ACN6. The highest reported SAR for body and simultaneous conditions in this filing are 0.86 W/kg and 0.86 W/kg, respectively. Output power is reduced when the module is installed in this host as detailed in this filing. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous conditions in this filing are 0.88 W/kg and 0.90 W/kg, respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.37 W/Kg and 1.54 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Dell model P139G). Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are <0.10 W/kg and 0.69 W/kg, respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Dell model P139G). Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 0.63 W/kg and 1.23 W/kg, respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Dell model P139G). Modular Approval. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 0.46 W/kg and 0.80 W/kg, respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Lenovo 300e 2nd Gen, 82GK). Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body condition is in this filing are 0.97 W/kg.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Lenovo 300e 2nd Gen, 82GK). Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body condition and simultaneous exposure in this filing are 1.12 W/kg and 1.28 W/kg.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Lenovo 300e 2nd Gen, 82GK). Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Lenovo IdeaPad Flex 3 11ADA05). The highest reported SAR value for body-worn accessory and simultaneous transmission exposure conditions are 1.07 W/Kg and 1.46 W/Kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.37 W/Kg and 1.54 W/Kg respectively. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Lenovo IdeaPad Flex 3 11ADA05). The highest reported SAR value for body-worn accessory and simultaneous transmission exposure conditions are 0.93 W/Kg and 1.46 W/Kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.40 W/Kg and 1.48 W/Kg respectively. Modular Approval. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Lenovo IdeaPad Flex 3 11ADA05). The highest reported SAR value for body-worn accessory and simultaneous transmission exposure conditions are <0.1 W/Kg and 1.46 W/Kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.16 W/Kg and 1.48 W/Kg respectively. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (ThinkBook 14 G2 ARE) with new antenna as documented in this filing. The highest reported SAR value for body-worn accessory and simultaneous transmission exposure conditions are 0.50 W/Kg and 0.92 W/Kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.37 W/Kg and 1.54 W/Kg respectively. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (ThinkBook 14 G2 ARE) with new antenna as documented in this filing. The highest reported SAR value for body-worn accessory and simultaneous transmission exposure conditions are <0.1 W/Kg and 1.21 W/Kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.16 W/Kg and 1.48 W/Kg respectively. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (ThinkBook 15 G2 ARE) with new antenna as documented in this filing. The highest reported SAR value for body-worn accessory and simultaneous transmission exposure conditions are 0.72 W/Kg and 1.18 W/Kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.37 W/Kg and 1.54 W/Kg respectively. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (ThinkBook 15 G2 ARE) with new antenna as documented in this filing. The highest reported SAR value for body-worn accessory and simultaneous transmission exposure conditions are <0.1 W/Kg and 1.59 W/Kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.16 W/Kg and 1.59 W/Kg respectively. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (ThinkBook 15 G2 ARE) with new antenna as documented in this filing. The highest reported SAR value for body-worn accessory and simultaneous transmission exposure conditions are 0.79 W/Kg and 1.59 W/Kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.40 W/Kg and 1.59 W/Kg respectively. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (ThinkBook 14 G2 ARE) with new antenna as documented in this filing. The highest reported SAR value for body-worn accessory and simultaneous transmission exposure conditions are 0.68 W/Kg and 1.21 W/Kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.40 W/Kg and 1.48 W/Kg respectively. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (DELL P100F, P100F001) with new antenna as documented in this filing. The highest reported SAR value for body-worn accessory and simultaneous transmission exposure conditions are 1.04 W/Kg and 1.06 W/Kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.37 W/Kg and 1.54 W/Kg respectively. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (DELL P100F, P100F001) with new antenna as documented in this filing. The highest reported SAR value for body-worn accessory and simultaneous transmission exposure conditions are <0.1 W/Kg and 1.06 W/Kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.16 W/Kg and 1.48 W/Kg respectively. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (DELL P100F, P100F001) with new antenna as documented in this filing. The highest reported SAR value for body-worn accessory and simultaneous transmission exposure conditions are 0.17 W/Kg and 0.31 W/Kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.40 W/Kg and 1.48 W/Kg respectively. Modular Approval. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (DELL P46E, P46E001) with new antenna as documented in this filing. The highest reported SAR value for body-worn accessory and simultaneous transmission exposure conditions are 0.20 W/Kg and 0.26 W/Kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.40 W/Kg and 1.48 W/Kg respectively. Modular Approval. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (DELL P46E, P46E001) with new antenna as documented in this filing. The highest reported SAR value for body-worn accessory and simultaneous transmission exposure conditions are <0.1 W/Kg and 0.56 W/Kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.16 W/Kg and 1.48 W/Kg respectively. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (DELL P46E, P46E001) with new antenna as documented in this filing. The highest reported SAR value for body-worn accessory and simultaneous transmission exposure conditions are 0.55 W/Kg and 1.07 W/Kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.37 W/Kg and 1.54 W/Kg respectively. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II Permissive Change to allow use in Dell P102F portable computer. Output power is reduced when the module is installed in this host as detailed in this filing. The highest reported SAR for body and simultaneous conditions in this filing are 0.88 W/kg and 0.90 W/kg, respectively. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.37 W/Kg and 1.54 W/Kg respectively.
variousClass II Permissive Change to allow use in Dell P130G portable computer. Output power is reduced when the module is installed in this host as detailed in this filing. The highest reported SAR for body and simultaneous conditions in this filing are <0.10 W/kg and 1.10 W/kg, respectively. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.16 W/Kg and 1.48 W/Kg respectively.
variousClass II Permissive Change to allow use in Dell P130G portable computer. Output power is reduced when the module is installed in this host as detailed in this filing. The highest reported SAR for body and simultaneous conditions in this filing are 0.78 W/kg and 0.80 W/kg, respectively. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.40 W/Kg and 1.59 W/Kg respectively.
variousClass II Permissive Change to allow use in Dell P130G portable computer. Output power is reduced when the module is installed in this host as detailed in this filing. The highest reported SAR for body and simultaneous conditions in this filing are 1.07 W/kg and 1.10 W/kg, respectively. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.37 W/Kg and 1.54 W/Kg respectively.
variousClass II Permissive Change to allow use in Dell P102F portable computer. Output power is reduced when the module is installed in this host as detailed in this filing. The highest reported SAR for body and simultaneous conditions in this filing are <0.10 W/kg and 1.07 W/kg, respectively. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.16 W/Kg and 1.48 W/Kg respectively.
variousClass II Permissive Change to allow use in Dell P102F portable computer. Output power is reduced when the module is installed in this host as detailed in this filing. The highest reported SAR for body and simultaneous conditions in this filing are 1.06 W/kg and 1.07 W/kg, respectively. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.40 W/Kg and 1.59 W/Kg respectively.
variousClass II permissive change to add the specific portable host (DELL P100F, P100F001) with new antenna as documented in this filing. The highest reported SAR value for body-worn accessory and simultaneous transmission exposure conditions are 0.17 W/Kg and 0.31 W/Kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.40 W/Kg and 1.48 W/Kg respectively. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (DELL P126G) with new antenna and reduced power as documented in this filing. The highest reported SAR value for body-worn accessory and simultaneous transmission exposure conditions are 0.59 W/Kg and 0.60 W/Kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.37 W/Kg and 1.54 W/Kg respectively. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (DELL P126G) with new antenna and reduced power as documented in this filing. The highest reported SAR value for body-worn accessory and simultaneous transmission exposure conditions are <0.1 W/Kg and 0.92 W/Kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.16 W/Kg and 1.48 W/Kg respectively. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (DELL P126G) with new antenna and reduced power as documented in this filing. The highest reported SAR value for body-worn accessory and simultaneous transmission exposure conditions are 0.91 W/Kg and 0.92 W/Kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.40 W/Kg and 1.48 W/Kg respectively. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Lenovo IdeaPad Flex 5 14ARE05). Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body condition and simultaneous exposures in this filing are 1.06 W/kg and 1.17 W/kg. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.24 W/Kg and 1.54 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Lenovo IdeaPad Flex 5 14ARE05). Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body condition and simultaneous exposures in this filing are 0.11 W/kg and 1.28 W/kg.The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.14 W/Kg and 1.48 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Lenovo IdeaPad Flex 5 14ARE05). Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body condition and simultaneous exposure in this filing are 1.18 W/kg and 1.28 W/kg. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.40 W/Kg and 1.48 W/Kg respectively.
variousClass II permissive change to add the specific portable host (Lenovo IdeaPad Slim 7 14ARE05) with new antenna and reduced power as documented in this filing. The highest reported SAR value for body-worn accessory and simultaneous transmission exposure conditions are 0.42 W/Kg and 0.42 W/Kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.37 W/Kg and 1.54 W/Kg respectively. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Lenovo IdeaPad Slim 7 14ARE05) with new antenna and reduced power as documented in this filing. The highest reported SAR value for body-worn accessory and simultaneous transmission exposure conditions are 0.69 W/Kg and 0.39 W/Kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.40 W/Kg and 1.48 W/Kg respectively. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Lenovo IdeaPad Slim 7 14ARE05) with new antenna and reduced power as documented in this filing. The highest reported SAR value for body-worn accessory and simultaneous transmission exposure conditions are <0.1 W/Kg and 0.42 W/Kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.16 W/Kg and 1.48 W/Kg respectively. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Dell computer model P121G). Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous conditions in this filing are 0.82 W/kg and 0.87 W/kg, respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.40 W/Kg and 1.48 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Dell computer model P121G). Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous conditions in this filing are < 0.10 W/kg and 0.87 W/kg, respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.14 W/Kg and 1.48 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Dell computer model P121G). Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous conditions in this filing are 0.59 W/kg and 0.64 W/kg, respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.24 W/Kg and 1.54 W/Kg respectively.
variousClass II permissive change to add the specific portable host (Acer N19C4) with new antenna and reduced power as documented in this filing. The highest reported SAR value for body-worn accessory and simultaneous transmission exposure conditions are 0.69 W/Kg and 0.69 W/Kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.40 W/Kg and 1.48 W/Kg respectively. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Acer N19C4) with new antenna and reduced power as documented in this filing. The highest reported SAR value for body-worn accessory and simultaneous transmission exposure conditions are 0.69 W/Kg and 0.35 W/Kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.37 W/Kg and 1.54 W/Kg respectively. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Acer N19C4) with new antenna and reduced power as documented in this filing. The highest reported SAR value for body-worn accessory and simultaneous transmission exposure conditions are <0.1 W/Kg and 0.69 W/Kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.16 W/Kg and 1.48 W/Kg respectively. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Lenovo IdeaPad 5 14ARE05********, 81YM********). Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.14 W/Kg and 1.48 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Lenovo IdeaPad 5 14ARE05********, 81YM********). Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body condition and simultaneous exposure in this filing are 0.81 W/kg and 0.96 W/kg. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.40 W/Kg and 1.48 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Lenovo IdeaPad 5 14ARE05********, 81YM********). Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body condition and simultaneous exposures in this filing are 0.51 W/kg and 0.82 W/kg. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.24 W/Kg and 1.54 W/Kg respectively.
variousClass II Permissive Change to allow use in portable laptop/notebook host Lenovo 300e Chromebook 2nd Gen AST, 82CE. Output power is reduced and CH12-13 are disabled by software when the module is installed in this host as detailed in this filing. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous conditions in this filing are 0.98 W/kg and <0.10 W/kg, respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.24 W/Kg and 1.54 W/Kg respectively.
variousClass II Permissive Change to allow use in portable laptop/notebook host Lenovo 300e Chromebook 2nd Gen AST, 82CE. Output power is reduced when the module is installed in this host as detailed in this filing. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.14 W/Kg and 1.48 W/Kg respectively.
variousClass II Permissive Change to allow use in portable laptop/notebook host Lenovo 300e Chromebook 2nd Gen AST, 82CE. Output power is reduced when the module is installed in this host as detailed in this filing. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous conditions in this filing are 1.20 W/kg and 1.20 W/kg, respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.24 W/Kg and 1.54 W/Kg respectively.
variousClass II permissive change to update U-NII-3 band to meet FCC 16-24 requirements for mobile RF exposure category. Modular Approval. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 0.32 W/kg and 0.32 W/kg respectively.
variousClass II Permissive Change to allow use in portable laptop/notebook host Lenovo IdeaPad S540-13API. output power is reduced when the module is installed in this host as detailed in this filing. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous conditions in this filing are 1.15 W/kg and 1.22 W/kg, respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.40 W/Kg and 1.48 W/Kg respectively.
variousClass II Permissive Change to allow use in portable laptop/notebook host Lenovo IdeaPad S540-13API. output power is reduced when the module is installed in this host as detailed in this filing. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous conditions in this filing are 0.77 W/kg and 0.83 W/kg, respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.24 W/Kg and 1.54 W/Kg respectively.
variousClass II Permissive Change to allow use in portable laptop/notebook host Lenovo IdeaPad S540-13API. output power is reduced when the module is installed in this host as detailed in this filing. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous conditions in this filing are < 0.1 W/Kg and 1.22 W/kg, respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.14 W/Kg and 1.48 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Dell Model P42E). Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous conditions in this filing are 1.03 W/kg and 1.05 W/kg, respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.24 W/Kg and 1.54 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Dell Model P42E). Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous conditions in this filing are 0.02 W/kg and 1.06 W/kg, respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.14 W/Kg and 1.48 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Dell Model P42E). Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous conditions in this filing are 1.06 W/kg and 1.06 W/kg, respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.40 W/Kg and 1.48 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Acer N17W7). Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions in this filing are 0.45 W/kg and 0.89 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.40 W/Kg and 1.59 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Acer N17W7). Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. The highest reported SAR for body and simultaneous transmission conditions in this filing are <0.1 W/kg and 0.54 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.14 W/Kg and 1.48 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host ((Acer N17W7) and disable channels 12 & 13. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions in this filing are 0.52 W/kg and 1.0 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.24 W/Kg and 1.59 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Acer N19P1). Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. The highest reported SAR for body and simultaneous transmission conditions in this filing are <0.1 W/kg and 0.72 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.14 W/Kg and 1.48 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host ((Acer N19P1). Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions in this filing are 0.82 W/kg and 1.45 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.24 W/Kg and 1.59 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Acer N19P1). Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions in this filing are 0.29 W/kg and 0.53 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.40 W/Kg and 1.59 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Dell Model P83F and P83F001). Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous conditions in this filing are 0.97 W/kg and 1.37 W/kg, respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.24 W/Kg and 1.54 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Dell Model P83F and P83F001). Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-toantenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous conditions in this filing are 0.08 W/kg and 1.24 W/kg, respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.14 W/Kg and 1.48 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Dell Model P83F and P83F001). Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous conditions in this filing are 1.17 W/kg and 1.27 W/kg, respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.40 W/Kg and 1.48 W/Kg respectively.
variousClass II permissive change to add the specific portable host (DELL P100G) with new antenna and reduced power as documented in this filing. The highest reported SAR value for body-worn accessory and simultaneous transmission exposure conditions are <0.1 W/Kg and 0.65 W/Kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.16 W/Kg and 1.48 W/Kg respectively. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Dell Model T04J). Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body condition in this filing is 1.18 W/kg. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.40 W/Kg and 1.48 W/Kg respectively.
variousClass II permissive change to add the specific portable host (DELL P99G) with new antenna and reduced power as documented in this filing. The highest reported SAR value for body-worn accessory and simultaneous transmission exposure conditions are 1.15 W/Kg and 0.92 W/Kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.37 W/Kg and 1.54 W/Kg respectively. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Dell Model T04J). Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body condition in this filing is < 0.10 W/kg. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.14 W/Kg and 1.48 W/Kg respectively.
variousClass II permissive change to add the specific portable host (DELL P100G) with new antenna and reduced power as documented in this filing. The highest reported SAR value for body-worn accessory and simultaneous transmission exposure conditions are 0.38 W/Kg and 0.35 W/Kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.37 W/Kg and 1.54 W/Kg respectively. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (DELL P99G) with new antenna and reduced power as documented in this filing. The highest reported SAR value for body-worn accessory and simultaneous transmission exposure conditions are <0.1 W/Kg and 0.92 W/Kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.16 W/Kg and 1.48 W/Kg respectively. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (DELL P99G) with new antenna and reduced power as documented in this filing. The highest reported SAR value for body-worn accessory and simultaneous transmission exposure conditions are 0.75 W/Kg and 0.75 W/Kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.37 W/Kg and 1.48 W/Kg respectively. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (DELL P100G) with new antenna and reduced power as documented in this filing. The highest reported SAR value for body-worn accessory and simultaneous transmission exposure conditions are 0.87 W/Kg and 0.65 W/Kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.37 W/Kg and 1.48 W/Kg respectively. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Dell Model T04J). Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. . The highest reported SAR for body condition in this filing is 0.96 W/kg. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.24 W/Kg and 1.54 W/Kg respectively.
variousClass II permissive change to add the specific portable host (DELL P96G) with new antenna as documented in this filing. The highest reported SAR value for body and simultaneous transmission exposure conditions are 1.15 W/Kg and 1.17 W/Kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.37 W/Kg and 1.54 W/Kg respectively. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (DELL P96G) with new antenna as documented in this filing. The highest reported SAR value for body and simultaneous transmission exposure conditions are 0.82 W/Kg and 0.84 W/Kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.37 W/Kg and 1.48 W/Kg respectively. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (DELL P96G) with new antenna as documented in this filing. The highest reported SAR value for body and simultaneous transmission exposure conditions are <0.1 W/Kg and 1.17 W/Kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.16 W/Kg and 1.48 W/Kg respectively. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Acer Model N18Q12). Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous conditions in this filing are < 0.10 W/kg and 0.57 W/kg, respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.14 W/Kg and 1.48 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Acer Model N18Q12). Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous conditions in this filing are 0.54 W/kg and 0.89 W/kg, respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.24 W/Kg and 1.54 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Acer Model N18Q12). Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous conditions in this filing are 0.60 W/kg and 1.01 W/kg, respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.40 W/Kg and 1.48 W/Kg respectively.
variousClass II permissive change to add the specific portable host (DELL P84F) with new antenna and reduced power as documented in this filing. The highest reported SAR value for body-worn accessory and simultaneous transmission exposure conditions are 1.20 W/Kg and 1.22 W/Kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.37 W/Kg and 1.48 W/Kg respectively. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (DELL P113G) with new antenna and reduced power as documented in this filing. The highest reported SAR value for body-worn accessory and simultaneous transmission exposure conditions are 0.81 W/Kg and 0.86 W/Kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.37 W/Kg and 1.48 W/Kg respectively. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (DELL P84F) with new antenna and reduced power as documented in this filing. The highest reported SAR value for body-worn accessory and simultaneous transmission exposure conditions are 0.92 W/Kg and 0.94 W/Kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.37 W/Kg and 1.54 W/Kg respectively. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (DELL P113G) with new antenna and reduced power as documented in this filing. The highest reported SAR value for body-worn accessory and simultaneous transmission exposure conditions are <0.1 W/Kg and 1.24 W/Kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.16 W/Kg and 1.48 W/Kg respectively. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (DELL P84F) with new antenna and reduced power as documented in this filing. The highest reported SAR value for body-worn accessory and simultaneous transmission exposure conditions are <0.1 W/Kg and 1.22 W/Kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.16 W/Kg and 1.48 W/Kg respectively. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (DELL P113G) with new antenna and reduced power as documented in this filing. The highest reported SAR value for body-worn accessory and simultaneous transmission exposure conditions are 1.19 W/Kg and 1.24 W/Kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.37 W/Kg and 1.54 W/Kg respectively. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Dell Model P110G) . Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions in this filing are <0.1 W/kg and 0.87 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.14 W/Kg and 0.49 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Dell Model P110G). Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. . The highest reported SAR for body and simultaneous transmission conditions in this filing are 0.96 W/kg and 0.87 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.24 W/Kg and 1.54 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Dell Model P110G). Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions in this filing are 0.84 W/kg and 0.87 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.40 W/Kg and 1.48 W/Kg respectively
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Dell Portable Computer, P77F). Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. The highest reported SAR for body and simultaneous transmission conditions in this filing are <0.1 W/kg and 0.79 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.14 W/Kg and 1.48 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Dell Portable Computer, P92G). Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. The highest reported SAR for body and simultaneous transmission conditions in this filing are <0.1 W/kg and 1.10 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.14 W/Kg and 1.48 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Dell Portable Computer, P92G). Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions in this filing are 1.09 W/kg and 1.10 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.24 W/Kg and 1.59 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Dell Portable Computer, P77F). Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions in this filing are 0.76 W/kg and 0.77 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.24 W/Kg and 1.59 W/Kg respectively.
variousClass II permissive change to add the specific portable host (DELL P93G) with new antenna and reduced power as documented in this filing. The highest reported SAR value for body-worn accessory and simultaneous transmission exposure conditions are 0.79 W/Kg and 0.80 W/Kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.37 W/Kg and 1.48 W/Kg respectively. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (DELL P93G) with new antenna and reduced power as documented in this filing. The highest reported SAR value for body-worn accessory and simultaneous transmission exposure conditions are 1.18 W/Kg and 1.20 W/Kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.37 W/Kg and 1.54 W/Kg respectively. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (DELL P93G) with new antenna and reduced power as documented in this filing. The highest reported SAR value for body-worn accessory and simultaneous transmission exposure conditions are <0.1 W/Kg and 1.20 W/Kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.16 W/Kg and 1.48 W/Kg respectively. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Dell Portable Computer, P92G). Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions in this filing are 0.92 W/kg and 0.94 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.40 W/Kg and 1.59 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Dell Portable Computer, P77F). Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions in this filing are 0.79 W/kg and 0.79 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.40 W/Kg and 1.59 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Lenovo model 14e Chromebook, Lenovo 14w, 81MQ and 81MH) with reduced powers. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. The highest reported SAR for body and simultaneous transmission conditions in this filing are <0.1 W/kg and 1.11 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.14 W/Kg and 1.48 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Lenovo model 14e Chromebook, Lenovo 14w, 81MQ and 81MH) with reduced powers. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions in this filing are 1.08 W/kg and 1.59 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.40 W/Kg and 1.59 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Lenovo model 14e Chromebook, Lenovo 14w, 81MQ and 81MH) with reduced powers. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions in this filing are 0.82 W/kg and 1.59 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.24 W/Kg and 1.59 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Dell Model P82F). Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. . The highest reported SAR for body and simultaneous transmission conditions in this filing are 0.13 W/kg and 0.40 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.24 W/Kg and 1.54 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Dell Model P82F). Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions in this filing are <0.1 W/kg and 0.40 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.14 W/Kg and 1.48 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Dell Model P82F). Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions in this filing are 0.34 W/kg and 0.40 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.40 W/Kg and 1.48 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Acer Model N18H2). Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions in this filing are 0.94 W/kg and 0.94 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.40 W/Kg and 1.48 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Acer Model N18H2). Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions in this filing are <0.1 W/kg and 0.75 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.14 W/Kg and 1.48 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Acer Model N18H2). Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. . The highest reported SAR for body and simultaneous transmission conditions in this filing are 0.71 W/kg and 1.33 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.24 W/Kg and 1.54 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Dell model P28S) with reduced powers. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions in this filing are 0.13 W/kg and 0.46 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.24 W/Kg and 1.54 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Dell model P28S) with reduced powers. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions in this filing are <0.1 W/kg and 0.46 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.24 W/Kg and 1.54 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Dell model P28S) with reduced powers. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions in this filing are 0.26 W/kg and 0.46 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.40 W/Kg and 1.48 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Dell models P73G) with reduced powers. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions in this filing are 0.20 W/kg and 0.58 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.24 W/Kg and 1.54 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Dell models P73G) with reduced powers. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions in this filing are 0.38 W/kg and 0.59 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.40 W/Kg and 1.48 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Dell model P73G) with reduced powers. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions in this filing are <0.1 W/kg and 0.42 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.14 W/Kg and 1.48 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Dell model P91G) with reduced powers. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. . The highest reported SAR for body and simultaneous transmission conditions in this filing are 0.81 W/kg and 0.82 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.24 W/Kg and 1.54 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Dell model P76F) with reduced powers. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions in this filing are <0.1 W/kg and 1.12 W/kg respectively The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.14 W/Kg and 1.48 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Dell model P91G) with reduced powers. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions in this filing are 0.56 W/kg and 0.57 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.40 W/Kg and 1.48 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Dell model P76F) with reduced powers. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. . The highest reported SAR for body and simultaneous transmission conditions in this filing are 0.89 W/kg and 0.91 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.24 W/Kg and 1.54 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Dell model P36E) with reduced powers. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions in this filing are 0.1 W/kg and 0.97 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.14 W/Kg and 1.48 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Dell model P36E) with reduced powers. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions in this filing are 0.87 W/kg and 0.97 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.40 W/Kg and 1.48 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Dell model P76F) with reduced powers. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions in this filing are 1.10 W/kg and 1.12 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.40 W/Kg and 1.48 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Dell model P36E) with reduced powers. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions in this filing are 0.70 W/kg and 0.80 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.24 W/Kg and 1.54 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Dell model P91G) with reduced powers. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions in this filing are <0.1 W/kg and 0.82 W/kg respectively The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.14 W/Kg and 1.48 W/Kg respectively.
variousClass II permissive change to add the specific portable host (Lenovo YOGA C930-13IKB, Lenovo YOGA C930-13IKB Glass) with new antenna and reduced power as documented in this filing. The highest reported SAR value for body-worn accessory and simultaneous transmission exposure conditions are 0.16 W/Kg and 1.37 W/Kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.16 W/Kg and 1.48 W/Kg respectively. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Lenovo YOGA C930-13IKB, Lenovo YOGA C930-13IKB Glass) with new antenna and reduced power as documented in this filing. The highest reported SAR value for body-worn accessory and simultaneous transmission exposure conditions are 1.16 W/Kg and 1.26 W/Kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.37 W/Kg and 1.54 W/Kg respectively. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi- transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Lenovo YOGA C930-13IKB, Lenovo YOGA C930-13IKB Glass) with new antenna and reduced power as documented in this filing. The highest reported SAR value for body-worn accessory and simultaneous transmission exposure conditions are 1.37 W/Kg and 1.37 W/Kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.37 W/Kg and 1.48 W/Kg respectively. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. The antenna (s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host Dell models P87G, P87G001 with reduced powers. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions in this filing are 0.62 W/kg and 0.83 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.24 W/Kg and 1.54 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host Dell models P87G, P87G001 with reduced powers. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions in this filing are 0.39 W/kg and 0.83 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.40 W/Kg and 1.48 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host Dell models P87G, P87G001 with reduced powers. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.14 W/Kg and 1.48 W/Kg respectively.
variousClass II permissive change to add the new antenna type (Dipole) for use in mobile RF exposure category configuration as described in this filing. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi- transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the new antenna type (Dipole) for use in mobile RF exposure category configuration as described in this filing. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. The antenna (s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the new antenna type (Dipole) for use in mobile RF exposure category configuration as described in this filing. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Dell P69G) with new antenna models as described in this filing. The highest reported SAR value for body-worn accessory and simultaneous transmission exposure conditions are 1.19 W/Kg and 1.20 W/Kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.24 W/Kg and 1.54 W/Kg respectively. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Dell P69G) with new antenna models as described in this filing. The highest reported SAR value for body-worn accessory and simultaneous transmission exposure conditions are 0.88 W/Kg and 0.90 W/Kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.40 W/Kg and 1.48 W/Kg respectively. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Dell P69G) with new antenna models as described in this filing. The highest reported SAR value for body-worn accessory and simultaneous transmission exposure conditions are < 0.1 W/Kg and 1.20 W/Kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.14 W/Kg and 1.48 W/Kg respectively. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host Dell P73G with reduced powers and new antennas. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. . The highest reported SAR for body and simultaneous transmission conditions in this filing are 0.16 W/kg and 0.22 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.24 W/Kg and 1.54 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host Dell P73G with reduced powers and new antennas. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions in this filing are 0.29 W/kg and 0.29 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.40 W/Kg and 1.48 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host Dell P73G with reduced powers and new antennas. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions in this filing are <0.10 W/kg and 0.29 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.14 W/Kg and 1.48 W/Kg respectively.
variousC2PC to allow use in the host laptop ACER N17P4 with power reduction for channels as described in this filing and to disable channels 12 and 13. The highest reported SAR for body and simultaneous transmission onditions covered by the original modular approval (KDB 616217) were 0.77 W/kg and 0.77 W/kg respectively. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi- transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 0.77 W/kg and 0.77 W/kg respectively.
variousC2PC to allow use in the host laptop ACER N17P4 with power reduction for channels as described in this filing and to disable channels 12 and 13. The highest reported SAR covered by the original modular approval (KDB 616217) was < 0.1W/Kg. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value was < 0.1W/Kg.
variousC2PC to allow use in the host laptop ACER N17P4 with power reduction for channels as described in this filing and to disable channels 12 and 13. The highest reported SAR for body and simultaneous transmission onditions covered by the original modular approval (KDB 616217) were 0.25 W/kg and 0.25 W/kg respectively. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. The antenna (s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 0.25 W/kg and 0.25 W/kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook/tablet host (Acer N17W5) with reduced powers as shown in application. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi- transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions in this filing are 0.83 W/kg and 1.31 W/kg respectively. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions across all filings under this equipment code and FCC ID are 1.40 W/Kg and 1.48 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook/tablet host (Acer N17W5) with reduced powers as shown in application. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions across all filings under this equipment code and FCC ID are 0.23 W/Kg and 1.41 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook/tablet host (Acer N17W5) with reduced powers as shown in application. Wi-Fi Channels 12/13 are disabled in this host configuration. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions in this filing are 1.06 W/kg and 0.65 W/kg respectively. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions across all filings under this equipment code and FCC ID are 1.24 W/Kg and 1.54 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook/tablet host (Lenovo 300e, 81AF, 81FY) using reduced power settings as described in the filing. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for stand-alone and simultaneous transmission in this filing are 0.74 W/kg and 1.41 W/kg respectively. The highest reported SAR for stand-alone and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.40 W/Kg and 1.48 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook/tablet host (Lenovo 300e, 81AF, 81FY) using reduced power settings as described in the filing. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for stand-alone and simultaneous transmission in this filing are <0.1 W/kg and 0.76 W/kg respectively. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions across all filings under this equipment code and FCC ID are 0.14 W/Kg and 1.48 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook/tablet host (Lenovo 300e, 81AF, 81FY) using reduced power settings as described in the filing. This host/module combination will only operate (20MHz Channel BW) 2412-2462MHz and 2422-2452 MHz (40MHz Channel BW). Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for stand-alone and simultaneous transmission conditions in this filing are 0.65 W/kg and 1.03 W/kg respectively. The highest reported SAR for stand-alone and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.24 W/Kg and 1.54 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook/tablet host (Lenovo MIIX 520-12IKB; 81CG; 20M3; 20M4) with reduced powers as shown in application. Wi-Fi Channels 12/13 are disabled in this host configuration. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions in this filing are 1.12 W/kg and 1.34 W/kg respectively. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions across all filings under this equipment code and FCC ID are 1.24 W/Kg and 1.54 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook/tablet host (Lenovo MIIX 520-12IKB; 81CG; 20M3; 20M4) with reduced powers as shown in application. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions across all filings under this equipment code and FCC ID are 0.23 W/Kg and 1.41 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook/tablet host (Lenovo MIIX 520-12IKB; 81CG; 20M3; 20M4) with reduced powers as shown in application.. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi- transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions in this filing are 1.19 W/kg and 1.41 W/kg respectively. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions across all filings under this equipment code and FCC ID are 1.40 W/Kg and 1.48 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook/tablet host (Dell P74G) with reduced powers as shown in application.. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi- transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions in this filing are 0.80 W/kg and 1.26 W/kg respectively. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions across all filings under this equipment code and FCC ID are 1.40 W/Kg and 1.48 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook/tablet host (Dell P74G) with reduced powers as shown in application. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions across all filings under this equipment code and FCC ID are 0.14 W/Kg and 1.48 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (DELL P61F) in this host configuration. Output power listed is conducted. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions across all filings under this equipment code and FCC ID are 0.14 W/Kg and 1.48 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (DELL P61F) in this host configuration. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi- transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions in this filing are 0.52 W/kg and 0.58 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.40 W/Kg and 1.48 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (DELL P61F) in this host configuration. Output power listed is conducted for BT and maximum combined conducted for WLAN. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions in this filing are 0.77 W/kg and 0.92 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.24 W/Kg and 1.54 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook/tablet host (Dell P74G) with reduced powers as shown in application. Wi-Fi Channels 12/13 are disabled in this host configuration. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions in this filing are 0.39 W/kg and 0.77 W/kg respectively. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions across all filings under this equipment code and FCC ID are 1.24 W/Kg and 1.54 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook/tablet host (Dell T03H) with reduced powers as shown in application. Wi-Fi Channels 12/13 are disabled in this host configuration. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions in this filing are <0.1 W/kg and <0.1 W/kg respectively. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions across all filings under this equipment code and FCC ID are 1.24 W/Kg and 1.54 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook/tablet host (Dell T03H) with reduced powers as shown in application.. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi- transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions in this filing are 0.27 W/kg and 0.33 W/kg respectively. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions across all filings under this equipment code and FCC ID are 1.40 W/Kg and 1.48 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook/tablet host (Dell T03H) with reduced powers as shown in application. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions across all filings under this equipment code and FCC ID are 0.14 W/Kg and 1.48 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook/tablet host (Lenovo YOGA 720-12IKB) with reduced powers as shown in application. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions across all filings under this equipment code and FCC ID are 0.14 W/Kg and 1.48 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook/tablet host (Lenovo YOGA 720-12IKB) with reduced powers as shown in application.. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi- transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions in this filing are 1.13 W/kg and 1.13 W/kg respectively. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions across all filings under this equipment code and FCC ID are 1.40 W/Kg and 1.48 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook/tablet host (Lenovo YOGA 720-12IKB) with reduced powers as shown in application. Wi-Fi Channels 12/13 are disabled in this host configuration. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions in this filing are 1.19 W/kg and 1.19 W/kg respectively. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions across all filings under this equipment code and FCC ID are 1.24 W/Kg and 1.54 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook/tablet host (Dell P29S) with reduced powers as shown in application. Wi-Fi Channels 12/13 are disabled in this host configuration. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions in this filing are 0.31 W/kg and 0.42 W/kg respectively. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions across all filings under this equipment code and FCC ID are 1.24 W/Kg and 1.54 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook/tablet host (Dell P29S) with reduced powers as shown in application. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions in this filing are 0.11 W/kg and 0.48 W/kg respectively. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions across all filings under this equipment code and FCC ID are 0.14 W/Kg and 1.48 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook/tablet host (Dell P29S) with reduced powers as shown in application.. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi- transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions in this filing are 0.37 W/kg and 0.48 W/kg respectively. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions across all filings under this equipment code and FCC ID are 1.40 W/Kg and 1.48 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Dell model P83G) using reduced power settings as described in the filing. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SARs for body condition and simultaneous transmission in this filing are 1.20 W/kg and 1.20 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.40 W/Kg and 1.48 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Dell model P83G) using reduced power settings as described in the filing. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SARs for body condition and simultaneous transmission in this filing are <0.10 W/kg and 1.20 W/kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Dell model P70F) using reduced power settings as described in the filing. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SARs for body condition and simultaneous transmission in this filing are 1.26 W/kg and 1.33 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.40 W/Kg and 1.48 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Dell model P70F) using reduced power settings as described in the filing. This host/module combination will only operate (20MHz Channel BW) 2412-2462MHz and 2422-2452 MHz (40MHz Channel BW). Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions in this filing are 1.14 W/kg and 1.23 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.24 W/Kg and 1.54 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Dell model P70F) using reduced power settings as described in the filing. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SARs for body condition and simultaneous transmission in this filing are <0.10 W/kg and 1.33 W/kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Dell model P83G) using reduced power settings as described in the filing. This host/module combination will only operate (20MHz Channel BW) 2412-2462MHz and 2422-2452 MHz (40MHz Channel BW). Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions in this filing are 0.98 W/kg and 0.99 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.24 W/Kg and 1.54 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Lenovo V720-14). Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi- transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions in this filing are 1.28 W/kg and 1.28 W/kg respectively. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions across all filings under this equipment code and FCC ID are 1.40 W/Kg and 1.48 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Lenovo V720-14). Wi-Fi Channels 12/13 are disabled in this host configuration. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions in this filing are 0.41 W/kg and 0.41 W/kg respectively. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions across all filings under this equipment code and FCC ID are 1.24 W/Kg and 1.54 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Lenovo V720-14). Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions in this filing are <0.1 W/kg and 1.28 W/kg respectively. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions across all filings under this equipment code and FCC ID are 0.14 W/Kg and 1.48 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Lenovo ideapad 720S-13IKB,Lenovo ideapad 720S Touch-13IKB,Lenovo ideapad 720S-13ARR), with Wi-Fi Channels 12/13 disabled in this host configuration. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions in this filing are 1.14 W/kg and 1.45 W/kg respectively. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions across all filings under this equipment code and FCC ID are 1.24 W/Kg and 1.54 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Lenovo ideapad 720S-13IKB,Lenovo ideapad 720S Touch-13IKB,Lenovo ideapad 720S-13ARR). Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions across all filings under this equipment code and FCC ID are 0.14 W/Kg and 1.48 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Lenovo ideapad 720S-13IKB,Lenovo ideapad 720S Touch-13IKB,Lenovo ideapad 720S-13ARR). Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi- transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SARs for stand-alone and simultaneous transmission exposure conditions in this filing are 0.61 W/kg and 0.93 W/kg respectively. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions across all filings under this equipment code and FCC ID are 1.40 W/Kg and 1.48 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Lenovo ideapad 520-15IKB). Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi- transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SARs for body condition and simultaneous transmission in this filing are 0.54 W/kg and 0.83 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.40 W/Kg and 1.48 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Lenovo ideapad 520-15IKB).Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.14 W/Kg and 1.48 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Lenovo ideapad 720S-14IKB), with Wi-Fi Channels 12/13 are disabled in this host configuration. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi- transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body transmission condition in this filing is 0.98 W/kg. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.40 W/Kg and 1.48 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Lenovo ideapad 720S-14IKB), with Wi-Fi Channels 12/13 are disabled in this host configuration. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.14 W/Kg and 1.48 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Lenovo ideapad 520-15IKB). Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body condition and simultaneous transmission in this filing are 0.30 W/kg and 0.56 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.24 W/Kg and 1.54 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Lenovo ideapad 720S-14IKB), with Wi-Fi Channels 12/13 are disabled in this host configuration. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions in this filing are 0.65 W/kg and 1.28 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.24 W/Kg and 1.54 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Lenovo YOGA 720-13IKB, Lenovo YOGA 720-13ISK and Lenovo YOGA 720-13AST). Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi- transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions in this filing are 1.04 W/kg and 1.48 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.40 W/Kg and 1.48 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Lenovo YOGA 720-13IKB, Lenovo YOGA 720-13ISK and Lenovo YOGA 720-13AST). Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions in this filing are 0.39 W/kg and 0.67 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.24 W/Kg and 1.54 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Lenovo YOGA 720-13IKB, Lenovo YOGA 720-13ISK and Lenovo YOGA 720-13AST). Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions in this filing are <0.10 W/kg and 1.48 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.14 W/Kg and 1.48 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Lenovo ideapad MIIX 510-12IKB:80XE) with reduced power table. Modular Approval. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions in this filing are 0.99 W/kg and 1.13 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.24 W/Kg and 1.54 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Lenovo ideapad MIIX 510-12IKB:80XE) with reduced power table. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions in this filing are 1.19 W/kg and 1.33 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.40 W/Kg and 1.47 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Lenovo ideapad MIIX 510-12IKB:80XE) with reduced power table. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions in this filing are 0.14 W/kg and 1.33 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.14 W/Kg and 1.45 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host Dell P73G. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 8.08mm distance from the base of the device and with an antenna-to-antenna separation distance of at least 27.5mm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions in this filing are <0.10 W/kg and 0.23 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.12 W/Kg and 1.45 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host Dell P73G. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 8.08mm distance from the base of the device and with an antenna-to-antenna separation distance of at least 27.5mm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. . The highest reported SAR for body and simultaneous transmission conditions in this filing are 0.12 W/kg and 0.13 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.24 W/Kg and 1.54 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host Dell P73G. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 8.08mm distance from the base of the device and with an antenna-to-antenna separation distance of at least 27.5mm. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi- transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions in this filing are 0.23 W/kg and 0.23 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.40 W/Kg and 1.47 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook/tablet hosts (Lenovo MIIX 720-12IKB). Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. . The highest reported SAR for body and simultaneous transmission conditions in this filing are 1.11 W/kg and 1.45 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.24 W/Kg and 1.54 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook hosts (Lenovo MIIX 720-12IKB). Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions in this filing are < 0.1 W/kg and 1.35 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.12 W/Kg and 1.45 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook/tablet hosts (Lenovo MIIX 720-12IKB). Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions in this filing are 1.40 W/kg and 1.47 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.40 W/Kg and 1.47 W/Kg respectively
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host Acer N16C4. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions in this filing are 0.68 W/kg and 1.25 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.34 W/Kg and 1.45 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host Acer N16C4. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. . The highest reported SAR for body and simultaneous transmission conditions in this filing are 1.00 W/kg and 1.06 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.24 W/Kg and 1.54 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host Acer N16C4. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions in this filing are >0.10 W/kg and 1.06 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.12 W/Kg and 1.45 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook hosts (Lenovo YOGA 910-13IKB and Lenovo YOGA 910-13IKB Glass). Modular Approval. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions in this filing are 1.34 W/kg and 1.35 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.34 W/Kg and 1.45 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook hosts (Lenovo YOGA 910-13IKB and Lenovo YOGA 910-13IKB Glass). Modular Approval. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. . The highest reported SAR for body and simultaneous transmission conditions in this filing are 0.98 W/kg and 1.54 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.24 W/Kg and 1.54 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook hosts(Lenovo YOGA 910-13IKB and Lenovo YOGA 910-13IKB Glass). Modular Approval. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions in this filing are < 0.1 W/kg and 1.35 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.12 W/Kg and 1.45 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Lenovo MIIX 710-12IKB). Modular Approval. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. . The highest reported SAR for body and simultaneous transmission conditions are 0.96 kg and 1.37 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.24 W/Kg and 1.52 W/Kg respectively.
variousGrant Condition: Class II Permissive Change to allow portable configuration in the specific laptop/notebook host (Lenovo MIIX 710-12IKB). Modular Approval. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.12 W/Kg and 1.45 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Lenovo MIIX 710-12IKB). Modular Approval. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 1.14 W/kg and 1.35 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.33 W/Kg and 1.45 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Acer N16Q12). Modular Approval. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions in this filing are 1.11 kg and 1.27 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.24 W/Kg and 1.43 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host Dell P62F. Modular Approval. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.33 W/Kg and 1.51 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Acer N16Q12). Modular Approval. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions in this filing are 0.16 kg and 1.27 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.12 W/Kg and 1.45 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Acer N16Q12). Modular Approval. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions in this filing are 0.73 W/kg and 1.41 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.33 W/Kg and 1.45 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host Dell P62F. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 0.76 W/kg and 1.51 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.33 W/Kg and 1.51 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host Dell P62F. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. . The highest reported SAR for body and simultaneous transmission conditions are 0.48 kg and 0.87 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.24 W/Kg and 1.34 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host Dell P75G. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. . The highest reported SAR for body and simultaneous transmission conditions are 0.85 kg and 0.97 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.24 W/Kg and 1.46 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host Dell P75G. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 0.79 W/kg and 1.46 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.33 W/Kg and 1.46 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Dell P75G). This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.33 W/Kg and 1.46 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Acer N16P5). Modular Approval. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. . The highest reported SAR for body and simultaneous transmission conditions in this filing are 0.89 kg and 1.43 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.24 W/Kg and 1.43 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Acer N16P5). Modular Approval. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions in this filing are 0.79 W/kg and 1.41 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.33 W/Kg and 1.45 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Acer N16P5). Modular Approval. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.12 W/Kg and 1.45 W/Kg respectively
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Lenovo YOGA 710-11IKB). Modular Approval. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.12 W/Kg and 1.45 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Lenovo YOGA 710-11IKB). Modular Approval. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 1.15 W/kg and 1.40 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.33 W/Kg and 1.45 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Lenovo YOGA 710-11IKB). Modular Approval. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. . The highest reported SAR for body and simultaneous transmission conditions are 0.99 kg and 1.52 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.24 W/Kg and 1.34 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Lenovo YOGA 510-15ISK, Lenovo YOGA 510-15IKB, Lenovo ideapad FLEX 4-1570, Lenovo ideapad FLEX 4-1580). Modular Approval. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. . The highest reported SAR for body and simultaneous transmission conditions are 0.30 kg and 0.82 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.24 W/Kg and 1.34 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Lenovo YOGA 510-15ISK, Lenovo YOGA 510-15IKB, Lenovo ideapad FLEX 4-1570, Lenovo ideapad FLEX 4-1580). Modular Approval. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 0.89 W/kg and 0.70 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.33 W/Kg and 1.45 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Lenovo YOGA 510-15ISK, Lenovo YOGA 510-15IKB, Lenovo ideapad FLEX 4-1570, Lenovo ideapad FLEX 4-1580). Modular Approval. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.12 W/Kg and 1.45 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Lenovo YOGA 510-14ISK, Lenovo YOGA 510-14AST, Lenovo YOGA 510-14IKB, Lenovo ideapad FLEX 4-1470, Lenovo ideapad FLEX 4-1435, Lenovo ideapad FLEX 4-1480). Modular Approval. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 0.78 W/kg and 1.37 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.33 W/Kg and 1.45 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Lenovo YOGA 510-14ISK, Lenovo YOGA 510-14AST, Lenovo YOGA 510-14IKB, Lenovo ideapad FLEX 4-1470, Lenovo ideapad FLEX 4-1435, Lenovo ideapad FLEX 4-1480). Modular Approval. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. . The highest reported SAR for body and simultaneous transmission conditions are 0.31 kg and 0.77 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.24 W/Kg and 1.34 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Lenovo YOGA 510-14ISK, Lenovo YOGA 510-14AST, Lenovo YOGA 510-14IKB, Lenovo ideapad FLEX 4-1470, Lenovo ideapad FLEX 4-1435, Lenovo ideapad FLEX 4-1480). Modular Approval. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.12 W/Kg and 1.45 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Lenovo YOGA 710-15ISK and Lenovo YOGA 710-15IKB). Modular Approval. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 0.78 W/kg and 1.53 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.33 W/Kg and 1.45 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host Lenovo YOGA 710-15ISK and Lenovo YOGA 710-15IKB). Modular Approval. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. . The highest reported SAR for body and simultaneous transmission conditions are 0.72 kg and 1.43 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.24 W/Kg and 1.34 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Lenovo YOGA 710-14ISK and Lenovo YOGA 710-14IKB). Modular Approval. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 1.08 W/kg and 1.52 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.33 W/Kg and 1.45 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host Lenovo YOGA 710-14ISK and Lenovo YOGA 710-14IKB). Modular Approval. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.12 W/Kg and 1.45 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host Lenovo YOGA 710-14ISK and Lenovo YOGA 710-14IKB). Modular Approval. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. . The highest reported SAR for body and simultaneous transmission conditions are 1.28 kg and 0.75 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.24 W/Kg and 1.34 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Lenovo ideapad 710S-13IKB). Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. . The highest reported SAR in this filing for standalone and simultaneous transmission conditions are 0.80 W/kg and 1.30 W/kg respectively. The highest reported SAR values for standalone and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.24 W/kg and 1.34 W/kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Lenovo ideapad 710S-13IKB). Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for standalone and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.12 W/kg and 1.45 W/kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Lenovo ideapad 710S-13IKB). Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR in this filing for standalone and simultaneous transmission conditions are 0.77 W/kg and 1.23 W/kg respectively. The highest reported SAR values for standalone and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.33 W/kg and 1.45 W/kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Dell P56F). Modular Approval. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. . The highest reported SAR for body and simultaneous transmission conditions are 1.22 kg and 1.23 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.24 W/Kg and 1.34 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Dell P56F). Modular Approval. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are1.18 W/kg and 1.19 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.33 W/Kg and 1.45 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Dell P56F). Modular Approval. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are <0.10 W/kg and 1.23 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.12 W/Kg and 1.45 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Acer N16P3). Modular Approval. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 1.19 W/kg and 1.01 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.33 W/Kg and 1.45 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Acer N16P3). Modular Approval. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 0.11 W/kg and 1.22 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.12 W/Kg and 1.45 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Acer N16P3) and disable CH12-13 as documented in this filing. Modular Approval. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. . The highest reported SAR for body and simultaneous transmission conditions are 1.11 kg and 1.22 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.24 W/Kg and 1.34 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Acer N16P2). Modular Approval. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 1.00 W/kg and 0.82 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.33 W/Kg and 1.45 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Acer N16P2). Modular Approval. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are <0.1 W/kg and 0.94 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.12 W/Kg and 1.45 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Acer N16P2). Modular Approval. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 1.17 kg and 0.94 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.24 W/Kg and 1.34 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook/tablet host (Dell P69G). Modular Approval. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 1.20 W/kg and 1.20 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.33 W/kg and 1.45 W/kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook /tablet host (Dell P58F). Modular Approval. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 0.99 W/kg and 0.99W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.33 W/kg and 1.45 W/kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook /tablet host (Dell P58F). Modular Approval. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 1.25 W/kg and 1.25 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.33 W/kg and 1.45W/kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook /tablet host (Dell P58F). Modular Approval. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.12 W/kg and 1.45 W/kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook/tablet host (Dell P69G). Modular Approval. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 1.17 W/kg and 1.17 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.33 W/kg and 1.45 W/kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook /tablet host (Dell P69G). Modular Approval. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.12 W/kg and 1.45 W/kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Acer N16C4). Modular Approval. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.12 W/kg and 1.45 W/kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Acer N16C4). Modular Approval. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 0.70 W/kg and 1.30 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.33 W/kg and 1.45 W/kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific tablet host (Acer N15W9). Modular Approval. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 1.18 W/kg and 1.18 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.33 W/kg and 1.45 W/kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific tablet host (Acer N15W9). Modular Approval. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 1.19 W/kg and 1.19 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.24 W/kg and 1.34 W/kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific tablet host (Acer N15W9). Modular Approval. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.12 W/kg and 1.45 W/kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Dell Model: P68G) as tested in this filing. Modular Approval. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II Permissive Change to allow portable configuration in the specific laptop/ notebook host (Dell Model: P68G) as tested in this filing. Modular Approval. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value for body-worn condition is 0.72 W/kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Dell Model: P68G) as tested in this filing. Modular Approval. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This device supports client-only operating modes in the 5150-5350 MHz and 5470- 5725 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value for body-worn condition is 0.73 W/kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Acer N15P5). Modular Approval. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are <0.1 W/kg and 0.71 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.12 W/Kg and 1.45 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Acer N15P6). Modular Approval. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are <0.1 W/kg and 0.66 W/kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Acer N15P6) and disable CH12-13 as documented in this filing. Modular Approval. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 0.72 W/kg and 0.39 W/kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Acer N15P5). Modular Approval. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 1.10 kg and 0.66 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.24 W/Kg and 1.34 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Acer N15P5). Modular Approval. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 0.68 W/kg and 0.71 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.33 W/Kg and 1.45 W/Kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (Acer N15P6). Modular Approval. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 1.04 W/kg and 0.66 W/kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (DELL P57G). Modular Approval. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 0.12 W/kg and 1.45 W/kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (DELL P55F). Modular Approval. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 0.72 W/kg and 0.82 W/kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (DELL P57G). Modular Approval. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 0.62 W/kg and 0.74 W/kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (DELL P55F). Modular Approval. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 1.24 W/kg and 1.34 W/kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (DELL P57G). Modular Approval. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 1.33 W/kg and 1.45 W/kg respectively.
variousClass II Permissive Change to allow portable configuration in the specific laptop/notebook host (DELL P55F). Modular Approval. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are <0.1 W/kg and 1.34 W/kg respectively.
variousOutput power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 0.32 W/kg and 0.32 W/kg respectively.
variousOutput power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 0.25 W/kg and 0.25 W/kg respectively.
variousOutput power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value was < 0.1W/Kg.
variousOutput power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 0.77 W/kg and 0.77 W/kg respectively.
variousIs there an equipment authorization waiver associated with this application?No
variousIf there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
various Firm Name SPORTON International Inc.
various Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch
various SGS Taiwan Ltd.
various BTL Inc.
various UL Verification Services (Guangzhou) Co., Ltd.
various Bureau Veritas CPS(H.K.) Ltd., Taoyuan Branch
various Shenzhen BALUN Technology Co., Ltd.
various Sporton International Inc.
various SGS Taiwan Ltd. Electronics & Communication Lab
various Sporton International (KunShan) Inc.
various Compliance Certification Services, Inc.
various Compliance Certification Services (KunShan) Inc.
various Compliance Certification Services Inc.
various Shenzhen BALUN Technology Co.,Ltd.
various Sporton International Inc
various Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch
various Cerpass Technology (SuZhou) Co., Ltd.
various Compliance Certification Services Inc. Wugu Lab.
various SGS TAIWAN LTD.
various Name A**** C******
various R****** C****
various R**** W****
various S****** H********
various S******** G****
various K******** L****
various H**** L********
various W******** C****
various E******** L****
various M****** L****
various M******** C******
various K****** C****
various H******** L****
various X**** W******
various J****** T****
various M******** C******
various R**** W********
various J******** L********
various N**** B******
various Telephone Number 886-3******** Extension:
various +886-********
various +886-******** Extension:
various +86-7******** Extension:
various +86 0********
various +886-******** Extension:
various 86-75********
various +886-******** Extension:
various 88633********
various +886-******** Extension:
various +886-********
various 86-51********
various + 86-******** Extension:
various 88633******** Extension:
various 886-2******** Extension:
various 86-75********
various 88633******** Extension:
various 886-3******** Extension:
various 86-05******** Extension:
various +886-******** Extension:
various 88622********
various 88622******** Extension:
various 886-2******** Extension:
various 886-2******** Extension:
various Fax Number 886-3********
various +886-********
various +886-********
various +886-********
various +886-********
various +886-********
various +886-********
various 86-51********
various 88633********
various 886-2********
various 86-75********
various 88633********
various 886-3********
various 86-05********
various 88622********
various 886-2********
various 886 2********
various E-mail a******@sporton.com.tw
various r******@bureauveritas.com
various R******@sgs.com
various S******@newbtl.com
various S******@ul.com
various k******@tw.bureauveritas.com
various H******@baluntek.com
various r******@tw.bureauveritas.com
various w******@sgs.com
various e******@tw.bureauveritas.com
various m******@sporton.com.tw
various J******@ccsrf.com
various k******@tw.ccsemc.com
various h******@sgs.com
various x******@baluntek.com
various j******@sporton.com.tw
various m******@cerpass.net
various r******@sgs.com
various H******@ccsrf.com
various j******@sgs.com
various n******@sgs.com
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 15E CC MO 5180 5240 0.072
1 2 15E CC MO 5260 5320 0.066
1 3 15E CC MO 5500 5720 0.073
1 4 15E CC MO 5745 5825 0.078
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 15C CC 2402 2480 0.003
2 2 15C CC MO 2412 2472 0.524
2 3 15C CC MO 2422 2462 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
4 1 15C CC 2402 2480 0.003
4 2 15C CC MO 2412 2472 0.524
4 3 15C CC MO 2422 2462 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
5 1 15E CC MO 5180 5240 0.072
5 2 15E CC MO 5260 5320 0.066
5 3 15E CC MO 5500 5720 0.073
5 4 15E CC MO 5745 5825 0.078
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
6 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
7 1 15C CC 2402 2480 0.003
7 2 15C CC MO 2412 2472 0.524
7 3 15C CC MO 2422 2462 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
8 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
9 1 15E CC MO 5180 5240 0.072
9 2 15E CC MO 5260 5320 0.066
9 3 15E CC MO 5500 5720 0.073
9 4 15E CC MO 5745 5825 0.078
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
10 1 15C CC 2402 2480 0.003
10 2 15C CC MO 2412 2472 0.524
10 3 15C CC MO 2422 2462 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
11 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
12 1 15E CC MO 5180 5240 0.072
12 2 15E CC MO 5260 5320 0.066
12 3 15E CC MO 5500 5720 0.073
12 4 15E CC MO 5745 5825 0.078
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
13 1 15E CC MO 5180 5240 0.072
13 2 15E CC MO 5190 5230 0.06
13 3 15E CC MO 5210 5210 0.014
13 4 15E CC MO 5260 5320 0.066
13 5 15E CC MO 5270 5310 0.057
13 6 15E CC MO 5290 5290 0.02
13 7 15E CC MO 5500 5720 0.073
13 8 15E CC MO 5510 5710 0.054
13 9 15E CC MO 5530 5690 0.047
13 1 15E CC MO 5745 5825 0.078
13 11 15E CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
14 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
15 1 15C CC MO 2402 2480 0.003
15 2 15C CC MO 2412 2472 0.524
15 3 15C CC MO 2422 2462 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
16 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
17 1 15C CC 2402 2480 0.003
17 2 15C CC MO 2412 2472 0.524
17 3 15C CC MO 2422 2462 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
18 1 15E CC MO 5180 5240 0.072
18 2 15E CC MO 5260 5320 0.066
18 3 15E CC MO 5500 5720 0.073
18 4 15E CC MO 5745 5825 0.078
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
19 1 15C CC 2402 2480 0.003
19 2 15C CC MO 2412 2472 0.524
19 3 15C CC MO 2422 2462 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
20 1 15E CC MO 5180 5240 0.072
20 2 15E CC MO 5190 5230 0.06
20 3 15E CC MO 5210 5210 0.014
20 4 15E CC MO 5260 5320 0.066
20 5 15E CC MO 5270 5310 0.057
20 6 15E CC MO 5290 5290 0.02
20 7 15E CC MO 5500 5720 0.073
20 8 15E CC MO 5510 5710 0.054
20 9 15E CC MO 5530 5690 0.047
20 1 15E CC MO 5745 5825 0.078
20 11 15E CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
21 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
22 1 15C CC 2402 2480 0.003
22 2 15C CC MO 2412 2472 0.524
22 3 15C CC MO 2422 2462 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
23 1 15E CC MO 5180 5240 0.072
23 2 15E CC MO 5190 5230 0.06
23 3 15E CC MO 5210 5210 0.014
23 4 15E CC MO 5260 5320 0.066
23 5 15E CC MO 5270 5310 0.057
23 6 15E CC MO 5290 5290 0.02
23 7 15E CC MO 5500 5720 0.073
23 8 15E CC MO 5510 5710 0.054
23 9 15E CC MO 5530 5690 0.047
23 1 15E CC MO 5745 5825 0.078
23 11 15E CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
24 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
25 1 15C CC 2402 2480 0.003
25 2 15C CC MO 2412 2472 0.524
25 3 15C CC MO 2422 2462 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
26 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
27 1 15C CC 2402 2480 0.003
27 2 15C CC MO 2412 2472 0.524
27 3 15C CC MO 2422 2462 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
28 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
29 1 15E CC MO 5180 5240 0.072
29 2 15E CC MO 5190 5230 0.06
29 3 15E CC MO 5210 5210 0.014
29 4 15E CC MO 5260 5320 0.066
29 5 15E CC MO 5270 5310 0.057
29 6 15E CC MO 5290 5290 0.02
29 7 15E CC MO 5500 5720 0.073
29 8 15E CC MO 5510 5710 0.054
29 9 15E CC MO 5530 5690 0.047
29 1 15E CC MO 5745 5825 0.078
29 11 15E CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
30 1 15E CC MO 5180 5240 0.072
30 2 15E CC MO 5190 5230 0.06
30 3 15E CC MO 5210 5210 0.014
30 4 15E CC MO 5260 5320 0.066
30 5 15E CC MO 5270 5310 0.057
30 6 15E CC MO 5290 5290 0.02
30 7 15E CC MO 5500 5720 0.073
30 8 15E CC MO 5510 5710 0.054
30 9 15E CC MO 5530 5690 0.047
30 1 15E CC MO 5745 5825 0.078
30 11 15E CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
31 1 15C CC 2402 2480 0.003
31 2 15C CC MO 2412 2472 0.524
31 3 15C CC MO 2422 2462 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
32 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
33 1 15E CC MO 5180 5240 0.072
33 2 15E CC MO 5260 5320 0.066
33 3 15E CC MO 5500 5720 0.073
33 4 15E CC MO 5745 5825 0.078
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
34 1 15E CC MO 5180 5240 0.072
34 2 15E CC MO 5260 5320 0.066
34 3 15E CC MO 5500 5720 0.073
34 4 15E CC MO 5745 5825 0.078
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
35 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
36 1 15C CC 2402 2480 0.003
36 2 15C CC MO 2412 2472 0.524
36 3 15C CC MO 2422 2462 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
37 1 15C CC 2402 2480 0.003
37 2 15C CC MO 2412 2472 0.524
37 3 15C CC MO 2422 2462 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
38 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
39 1 15E CC MO 5180 5240 0.072
39 2 15E CC MO 5190 5230 0.06
39 3 15E CC MO 5210 5210 0.014
39 4 15E CC MO 5260 5320 0.066
39 5 15E CC MO 5270 5310 0.057
39 6 15E CC MO 5290 5290 0.02
39 7 15E CC MO 5500 5720 0.073
39 8 15E CC MO 5510 5710 0.054
39 9 15E CC MO 5530 5690 0.047
39 1 15E CC MO 5745 5825 0.078
39 11 15E CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
40 1 15C CC 2402 2480 0.003
40 2 15C CC MO 2412 2462 0.524
40 3 15C CC MO 2412 2472 0.524
40 4 15C CC MO 2422 2462 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
41 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
42 1 15E CC MO 5180 5240 0.072
42 2 15E CC MO 5190 5230 0.06
42 3 15E CC MO 5210 5210 0.014
42 4 15E CC MO 5260 5320 0.066
42 5 15E CC MO 5270 5310 0.057
42 6 15E CC MO 5290 5290 0.02
42 7 15E CC MO 5500 5720 0.073
42 8 15E CC MO 5510 5710 0.054
42 9 15E CC MO 5530 5690 0.047
42 1 15E CC MO 5745 5825 0.078
42 11 15E CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
43 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
44 1 15C CC 2402 2480 0.003
44 2 15C CC MO 2412 2472 0.524
44 3 15C CC MO 2422 2462 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
45 1 15E 38 CC MO 5180 5240 0.072
45 2 15E 38 CC MO 5190 5230 0.06
45 3 15E 38 CC MO 5210 5210 0.014
45 4 15E 38 CC MO 5260 5320 0.066
45 5 15E 38 CC MO 5270 5310 0.057
45 6 15E 38 CC MO 5290 5290 0.02
45 7 15E 38 CC MO 5500 5720 0.073
45 8 15E 38 CC MO 5510 5710 0.054
45 9 15E 38 CC MO 5530 5690 0.047
45 1 15E 38 CC MO 5745 5825 0.078
45 11 15E 38 CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
46 1 15C CC 2402 2480 0.003
46 2 15C CC MO 2412 2472 0.524
46 3 15C CC MO 2422 2462 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
47 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
48 1 15E 38 CC MO 5180 5240 0.072
48 2 15E 38 CC MO 5190 5230 0.06
48 3 15E 38 CC MO 5210 5210 0.014
48 4 15E 38 CC MO 5260 5320 0.066
48 5 15E 38 CC MO 5270 5310 0.057
48 6 15E 38 CC MO 5290 5290 0.02
48 7 15E 38 CC MO 5500 5720 0.073
48 8 15E 38 CC MO 5510 5710 0.054
48 9 15E 38 CC MO 5530 5690 0.047
48 1 15E 38 CC MO 5745 5825 0.078
48 11 15E 38 CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
49 1 15C CC 2402 2480 0.003
49 2 15C CC MO 2412 2472 0.524
49 3 15C CC MO 2422 2462 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
50 1 15C CC 2402.00000000 2480.00000000 0.0020000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
51 1 15E 38 CC MO 5180 5240 0.072
51 2 15E 38 CC MO 5190 5230 0.06
51 3 15E 38 CC MO 5210 5210 0.014
51 4 15E 38 CC MO 5260 5320 0.066
51 5 15E 38 CC MO 5270 5310 0.057
51 6 15E 38 CC MO 5290 5290 0.02
51 7 15E 38 CC MO 5500 5720 0.073
51 8 15E 38 CC MO 5510 5710 0.054
51 9 15E 38 CC MO 5530 5690 0.047
51 1 15E 38 CC MO 5745 5825 0.078
51 11 15E 38 CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
52 1 15C CC 2402 2480 0.003
52 2 15C CC MO 2412 2472 0.524
52 3 15C CC MO 2422 2462 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
53 1 15E 38 CC MO 5180 5240 0.072
53 2 15E 38 CC MO 5190 5230 0.06
53 3 15E 38 CC MO 5210 5210 0.014
53 4 15E 38 CC MO 5260 5320 0.066
53 5 15E 38 CC MO 5270 5310 0.057
53 6 15E 38 CC MO 5290 5290 0.02
53 7 15E 38 CC MO 5500 5720 0.073
53 8 15E 38 CC MO 5510 5710 0.054
53 9 15E 38 CC MO 5530 5690 0.047
53 1 15E 38 CC MO 5745 5825 0.078
53 11 15E 38 CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
54 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
55 1 15E 38 CC MO 5180 5240 0.072
55 2 15E 38 CC MO 5190 5230 0.06
55 3 15E 38 CC MO 5210 5210 0.014
55 4 15E 38 CC MO 5260 5320 0.066
55 5 15E 38 CC MO 5270 5310 0.057
55 6 15E 38 CC MO 5290 5290 0.02
55 7 15E 38 CC MO 5500 5720 0.073
55 8 15E 38 CC MO 5510 5710 0.054
55 9 15E 38 CC MO 5530 5690 0.047
55 1 15E 38 CC MO 5745 5825 0.078
55 11 15E 38 CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
56 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
57 1 15C CC 2402 2480 0.003
57 2 15C CC MO 2412 2472 0.524
57 3 15C CC MO 2422 2462 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
58 1 15E 38 CC MO 5180 5240 0.072
58 2 15E 38 CC MO 5190 5230 0.06
58 3 15E 38 CC MO 5210 5210 0.014
58 4 15E 38 CC MO 5260 5320 0.066
58 5 15E 38 CC MO 5270 5310 0.057
58 6 15E 38 CC MO 5290 5290 0.02
58 7 15E 38 CC MO 5500 5720 0.073
58 8 15E 38 CC MO 5510 5710 0.054
58 9 15E 38 CC MO 5530 5690 0.047
58 1 15E 38 CC MO 5745 5825 0.078
58 11 15E 38 CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
59 1 15C CC 2402 2480 0.003
59 2 15C CC MO 2412 2472 0.524
59 3 15C CC MO 2422 2462 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
60 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
61 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
62 1 15E 38 CC MO 5180 5240 0.072
62 2 15E 38 CC MO 5190 5230 0.06
62 3 15E 38 CC MO 5210 5210 0.014
62 4 15E 38 CC MO 5260 5320 0.066
62 5 15E 38 CC MO 5270 5310 0.057
62 6 15E 38 CC MO 5290 5290 0.02
62 7 15E 38 CC MO 5500 5720 0.073
62 8 15E 38 CC MO 5510 5710 0.054
62 9 15E 38 CC MO 5530 5690 0.047
62 1 15E 38 CC MO 5745 5825 0.078
62 11 15E 38 CC MO 5775 5775 0.014
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
63 1 15C CC 2402 2480 0.003
63 2 15C CC MO 2412 2462 0.524
63 3 15C CC MO 2422 2452 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
64 1 15C CC 2402 2480 0.003
64 2 15C CC MO 2412 2462 0.524
64 3 15C CC MO 2422 2452 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
65 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
66 1 15E CC MO 5180 5240 0.072
66 2 15E CC MO 5190 5230 0.06
66 3 15E CC MO 5210 5210 0.014
66 4 15E CC MO 5260 5320 0.066
66 5 15E CC MO 5270 5310 0.057
66 6 15E CC MO 5290 5290 0.02
66 7 15E CC MO 5500 5720 0.073
66 8 15E CC MO 5510 5710 0.054
66 9 15E CC MO 5530 5690 0.047
66 1 15E CC MO 5745 5825 0.078
66 11 15E CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
67 1 15E CC MO 5180 5240 0.072
67 2 15E CC MO 5260 5320 0.066
67 3 15E CC MO 5500 5720 0.073
67 4 15E CC MO 5745 5825 0.078
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
68 1 15E CC MO 5180 5240 0.072
68 2 15E CC MO 5190 5230 0.06
68 3 15E CC MO 5210 5210 0.014
68 4 15E CC MO 5260 5320 0.066
68 5 15E CC MO 5270 5310 0.057
68 6 15E CC MO 5290 5290 0.02
68 7 15E CC MO 5500 5720 0.073
68 8 15E CC MO 5510 5710 0.054
68 9 15E CC MO 5530 5690 0.047
68 1 15E CC MO 5745 5825 0.078
68 11 15E CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
69 1 15C CC 2402 2480 0.003
69 2 15C CC MO 2412 2472 0.524
69 3 15C CC MO 2422 2462 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
70 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
71 1 15C CC 2402 2480 0.003
71 2 15C CC MO 2412 2472 0.524
71 3 15C CC MO 2422 2462 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
72 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
73 1 15E CC MO 5180 5240 0.072
73 2 15E CC MO 5190 5230 0.06
73 3 15E CC MO 5210 5210 0.014
73 4 15E CC MO 5260 5320 0.066
73 5 15E CC MO 5270 5310 0.057
73 6 15E CC MO 5290 5290 0.02
73 7 15E CC MO 5500 5720 0.073
73 8 15E CC MO 5510 5710 0.054
73 9 15E CC MO 5530 5690 0.047
73 1 15E CC MO 5745 5825 0.078
73 11 15E CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
74 1 15E CC MO 5180 5240 0.072
74 2 15E CC MO 5190 5230 0.06
74 3 15E CC MO 5210 5210 0.014
74 4 15E CC MO 5260 5320 0.066
74 5 15E CC MO 5270 5310 0.057
74 6 15E CC MO 5290 5290 0.02
74 7 15E CC MO 5500 5720 0.073
74 8 15E CC MO 5510 5710 0.054
74 9 15E CC MO 5530 5690 0.047
74 1 15E CC MO 5745 5825 0.078
74 11 15E CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
75 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
76 1 15C CC 2402 2480 0.003
76 2 15C CC MO 2412 2462 0.524
76 3 15C CC MO 2422 2452 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
77 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
78 1 15C CC 2402 2480 0.003
78 2 15C CC MO 2412 2472 0.524
78 3 15C CC MO 2422 2462 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
79 1 15E CC MO 5180 5240 0.072
79 2 15E CC MO 5190 5230 0.06
79 3 15E CC MO 5210 5210 0.014
79 4 15E CC MO 5260 5320 0.066
79 5 15E CC MO 5270 5310 0.057
79 6 15E CC MO 5290 5290 0.02
79 7 15E CC MO 5500 5720 0.073
79 8 15E CC MO 5510 5710 0.054
79 9 15E CC MO 5530 5690 0.047
79 1 15E CC MO 5745 5825 0.078
79 11 15E CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
80 1 15C CC 2402 2480 0.003
80 2 15C CC MO 2412 2472 0.524
80 3 15C CC MO 2422 2462 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
81 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
82 1 15E CC MO 5180 5240 0.072
82 2 15E CC MO 5190 5230 0.06
82 3 15E CC MO 5210 5210 0.014
82 4 15E CC MO 5260 5320 0.066
82 5 15E CC MO 5270 5310 0.057
82 6 15E CC MO 5290 5290 0.02
82 7 15E CC MO 5500 5720 0.073
82 8 15E CC MO 5510 5710 0.054
82 9 15E CC MO 5530 5690 0.047
82 1 15E CC MO 5745 5825 0.078
82 11 15E CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
83 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
84 1 15E 38 CC MO 5180 5240 0.072
84 2 15E 38 CC MO 5190 5230 0.06
84 3 15E 38 CC MO 5210 5210 0.014
84 4 15E 38 CC MO 5260 5320 0.066
84 5 15E 38 CC MO 5270 5310 0.057
84 6 15E 38 CC MO 5290 5290 0.02
84 7 15E 38 CC MO 5500 5720 0.073
84 8 15E 38 CC MO 5510 5710 0.054
84 9 15E 38 CC MO 5530 5690 0.047
84 1 15E 38 CC MO 5745 5825 0.078
84 11 15E 38 CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
85 1 15C CC 2402 2480 0.003
85 2 15C CC MO 2412 2472 0.524
85 3 15C CC MO 2422 2462 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
86 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
87 1 15C CC 2402 2480 0.003
87 2 15C CC MO 2412 2472 0.524
87 3 15C CC MO 2422 2462 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
88 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
89 1 15E 38 CC MO 5180 5240 0.072
89 2 15E 38 CC MO 5190 5230 0.06
89 3 15E 38 CC MO 5210 5210 0.014
89 4 15E 38 CC MO 5260 5320 0.066
89 5 15E 38 CC MO 5270 5310 0.057
89 6 15E 38 CC MO 5290 5290 0.02
89 7 15E 38 CC MO 5500 5720 0.073
89 8 15E 38 CC MO 5510 5710 0.054
89 9 15E 38 CC MO 5530 5690 0.047
89 1 15E 38 CC MO 5745 5825 0.078
89 11 15E 38 CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
90 1 15E 38 CC MO 5180 5240 0.072
90 2 15E 38 CC MO 5190 5230 0.06
90 3 15E 38 CC MO 5210 5210 0.014
90 4 15E 38 CC MO 5260 5320 0.066
90 5 15E 38 CC MO 5270 5310 0.057
90 6 15E 38 CC MO 5290 5290 0.02
90 7 15E 38 CC MO 5500 5720 0.073
90 8 15E 38 CC MO 5510 5710 0.054
90 9 15E 38 CC MO 5530 5690 0.047
90 1 15E 38 CC MO 5745 5825 0.078
90 11 15E 38 CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
91 1 15C CC 2402 2480 0.003
91 2 15C CC MO 2412 2472 0.524
91 3 15C CC MO 2422 2462 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
92 1 15C CC 2402 2480 0.003
92 2 15C CC MO 2412 2472 0.524
92 3 15C CC MO 2422 2462 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
93 1 15E 38 CC MO 5180 5240 0.072
93 2 15E 38 CC MO 5190 5230 0.06
93 3 15E 38 CC MO 5210 5210 0.014
93 4 15E 38 CC MO 5260 5320 0.066
93 5 15E 38 CC MO 5270 5310 0.057
93 6 15E 38 CC MO 5290 5290 0.02
93 7 15E 38 CC MO 5500 5720 0.073
93 8 15E 38 CC MO 5510 5710 0.054
93 9 15E 38 CC MO 5530 5690 0.047
93 1 15E 38 CC MO 5745 5825 0.078
93 11 15E 38 CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
94 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
95 1 15C CC 2402.00000000 2408.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
96 1 15C CC 2402 2480 0.003
96 2 15C CC MO 2412 2462 0.524
96 3 15C CC MO 2422 2452 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
97 1 15E 38 CC MO 5180 5240 0.072
97 2 15E 38 CC MO 5190 5230 0.06
97 3 15E 38 CC MO 5210 5210 0.014
97 4 15E 38 CC MO 5260 5320 0.066
97 5 15E 38 CC MO 5270 5310 0.057
97 6 15E 38 CC MO 5290 5290 0.02
97 7 15E 38 CC MO 5500 5720 0.073
97 8 15E 38 CC MO 5510 5710 0.054
97 9 15E 38 CC MO 5530 5690 0.047
97 1 15E 38 CC MO 5745 5825 0.078
97 11 15E 38 CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
98 1 15E 38 CC MO 5180 5240 0.072
98 2 15E 38 CC MO 5190 5230 0.06
98 3 15E 38 CC MO 5210 5210 0.014
98 4 15E 38 CC MO 5260 5320 0.066
98 5 15E 38 CC MO 5270 5310 0.057
98 6 15E 38 CC MO 5290 5290 0.02
98 7 15E 38 CC MO 5500 5720 0.073
98 8 15E 38 CC MO 5510 5710 0.054
98 9 15E 38 CC MO 5530 5690 0.047
98 1 15E 38 CC MO 5745 5825 0.078
98 11 15E 38 CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
99 1 15E 38 CC MO 5180 5240 0.072
99 2 15E 38 CC MO 5190 5230 0.06
99 3 15E 38 CC MO 5210 5210 0.014
99 4 15E 38 CC MO 5260 5320 0.066
99 5 15E 38 CC MO 5270 5310 0.057
99 6 15E 38 CC MO 5290 5290 0.02
99 7 15E 38 CC MO 5500 5720 0.073
99 8 15E 38 CC MO 5510 5710 0.054
99 9 15E 38 CC MO 5530 5690 0.047
99 1 15E 38 CC MO 5745 5825 0.078
99 11 15E 38 CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
100 1 15C CC 2402 2480 0.003
100 2 15C CC MO 2412 2472 0.524
100 3 15C CC MO 2422 2462 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
101 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
102 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
103 1 15C CC 2402 2480 0.003
103 2 15C CC MO 2412 2472 0.524
103 3 15C CC MO 2422 2462 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
104 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
105 1 15C CC 2402 2480 0.003
105 2 15C CC MO 2412 2472 0.524
105 3 15C CC MO 2422 2462 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
106 1 15E 38 CC MO 5180 5240 0.072
106 2 15E 38 CC MO 5190 5230 0.06
106 3 15E 38 CC MO 5210 5210 0.014
106 4 15E 38 CC MO 5260 5320 0.066
106 5 15E 38 CC MO 5270 5310 0.057
106 6 15E 38 CC MO 5290 5290 0.02
106 7 15E 38 CC MO 5500 5720 0.073
106 8 15E 38 CC MO 5510 5710 0.054
106 9 15E 38 CC MO 5530 5690 0.047
106 1 15E 38 CC MO 5745 5825 0.078
106 11 15E 38 CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
107 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
108 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
109 1 15C CC 2402 2480 0.003
109 2 15C CC MO 2412 2472 0.524
109 3 15C CC MO 2422 2462 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
110 1 15C CC 2402 2480 0.003
110 2 15C CC MO 2412 2472 0.524
110 3 15C CC MO 2422 2462 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
111 1 15E 38 CC MO 5180 5240 0.072
111 2 15E 38 CC MO 5190 5230 0.06
111 3 15E 38 CC MO 5210 5210 0.014
111 4 15E 38 CC MO 5260 5320 0.066
111 5 15E 38 CC MO 5270 5310 0.057
111 6 15E 38 CC MO 5290 5290 0.02
111 7 15E 38 CC MO 5500 5720 0.073
111 8 15E 38 CC MO 5510 5710 0.054
111 9 15E 38 CC MO 5530 5690 0.047
111 1 15E 38 CC MO 5745 5825 0.078
111 11 15E 38 CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
112 1 15C CC 2402 2480 0.003
112 2 15C CC MO 2412 2472 0.524
112 3 15C CC MO 2422 2462 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
113 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
114 1 15E 38 CC MO 5180 5240 0.072
114 2 15E 38 CC MO 5190 5230 0.06
114 3 15E 38 CC MO 5210 5210 0.014
114 4 15E 38 CC MO 5260 5320 0.066
114 5 15E 38 CC MO 5270 5310 0.057
114 6 15E 38 CC MO 5290 5290 0.02
114 7 15E 38 CC MO 5500 5720 0.073
114 8 15E 38 CC MO 5510 5710 0.054
114 9 15E 38 CC MO 5530 5690 0.047
114 1 15E 38 CC MO 5745 5825 0.078
114 11 15E 38 CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
115 1 15E 38 CC MO 5180 5240 0.072
115 2 15E 38 CC MO 5190 5230 0.06
115 3 15E 38 CC MO 5210 5210 0.014
115 4 15E 38 CC MO 5260 5320 0.066
115 5 15E 38 CC MO 5270 5310 0.057
115 6 15E 38 CC MO 5290 5290 0.02
115 7 15E 38 CC MO 5500 5720 0.073
115 8 15E 38 CC MO 5510 5710 0.054
115 9 15E 38 CC MO 5530 5690 0.047
115 1 15E 38 CC MO 5745 5825 0.078
115 11 15E 38 CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
116 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
117 1 15E 38 CC MO 5180 5240 0.072
117 2 15E 38 CC MO 5190 5230 0.06
117 3 15E 38 CC MO 5210 5210 0.014
117 4 15E 38 CC MO 5260 5320 0.066
117 5 15E 38 CC MO 5270 5310 0.057
117 6 15E 38 CC MO 5290 5290 0.02
117 7 15E 38 CC MO 5500 5720 0.073
117 8 15E 38 CC MO 5510 5710 0.054
117 9 15E 38 CC MO 5530 5690 0.047
117 1 15E 38 CC MO 5745 5825 0.078
117 11 15E 38 CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
118 1 15C CC 2402 2480 0.003
118 2 15C CC MO 2412 2472 0.524
118 3 15C CC MO 2422 2462 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
119 1 15C CC 2402 2480 0.003
119 2 15C CC MO 2412 2472 0.524
119 3 15C CC MO 2422 2462 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
120 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
121 1 15E 38 CC MO 5180 5240 0.072
121 2 15E 38 CC MO 5190 5230 0.06
121 3 15E 38 CC MO 5210 5210 0.014
121 4 15E 38 CC MO 5260 5320 0.066
121 5 15E 38 CC MO 5270 5310 0.057
121 6 15E 38 CC MO 5290 5290 0.02
121 7 15E 38 CC MO 5500 5720 0.073
121 8 15E 38 CC MO 5510 5710 0.054
121 9 15E 38 CC MO 5530 5690 0.047
121 1 15E 38 CC MO 5745 5825 0.078
121 11 15E 38 CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
122 1 15E 38 CC MO 5180 5240 0.072
122 2 15E 38 CC MO 5190 5230 0.06
122 3 15E 38 CC MO 5210 5210 0.014
122 4 15E 38 CC MO 5260 5320 0.066
122 5 15E 38 CC MO 5270 5310 0.057
122 6 15E 38 CC MO 5290 5290 0.02
122 7 15E 38 CC MO 5500 5720 0.073
122 8 15E 38 CC MO 5510 5710 0.054
122 9 15E 38 CC MO 5530 5690 0.047
122 1 15E 38 CC MO 5745 5825 0.078
122 11 15E 38 CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
123 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
124 1 15C CC 2402 2480 0.003
124 2 15C CC MO 2412 2462 0.524
124 3 15C CC MO 2422 2452 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
125 1 15C CC MO 2412 2472 0.524
125 2 15C CC MO 2422 2462 0.484
125 3 15C CC 2402 2480 0.003
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
126 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
127 1 15E CC MO 5180 5240 0.072
127 2 15E CC MO 5190 5230 0.06
127 3 15E CC MO 5210 5210 0.014
127 4 15E CB MO 5260 5320 0.066
127 5 15E CC MO 5270 5310 0.057
127 6 15E CC MO 5290 5290 0.02
127 7 15E CC MO 5500 5720 0.073
127 8 15E CC MO 5510 5710 0.054
127 9 15E CC MO 5530 5690 0.047
127 1 15E CC MO 5745 5825 0.078
127 11 15E CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
128 1 15C CC 2402 2480 0.003
128 2 15C CC MO 2412 2472 0.524
128 3 15C CC MO 2422 2462 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
129 1 15E 38 CC MO 5180 5240 0.072
129 2 15E 38 CC MO 5190 5230 0.06
129 3 15E 38 CC MO 5210 5210 0.014
129 4 15E 38 CC MO 5260 5320 0.066
129 5 15E 38 CC MO 5270 5310 0.057
129 6 15E 38 CC MO 5290 5290 0.02
129 7 15E 38 CC MO 5500 5720 0.073
129 8 15E 38 CC MO 5510 5710 0.054
129 9 15E 38 CC MO 5530 5690 0.047
129 1 15E 38 CC MO 5745 5825 0.078
129 11 15E 38 CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
130 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
131 1 15C CC 2402 2480 0.003
131 2 15C CC MO 2412 2472 0.524
131 3 15C CC MO 2422 2462 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
132 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
133 1 15E 38 CC MO 5180 5240 0.072
133 2 15E 38 CC MO 5190 5230 0.06
133 3 15E 38 CC MO 5210 5210 0.014
133 4 15E 38 CC MO 5260 5320 0.066
133 5 15E 38 CC MO 5270 5310 0.057
133 6 15E 38 CC MO 5290 5290 0.02
133 7 15E 38 CC MO 5500 5720 0.073
133 8 15E 38 CC MO 5510 5710 0.054
133 9 15E 38 CC MO 5530 5690 0.047
133 1 15E 38 CC MO 5745 5825 0.078
133 11 15E 38 CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
134 1 15C CC 2402 2480 0.003
134 2 15C CC MO 2412 2472 0.524
134 3 15C CC MO 2422 2462 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
135 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
136 1 15E 38 CC MO 5180 5240 0.072
136 2 15E 38 CC MO 5190 5230 0.06
136 3 15E 38 CC MO 5210 5210 0.014
136 4 15E 38 CC MO 5260 5320 0.066
136 5 15E 38 CC MO 5270 5310 0.057
136 6 15E 38 CC MO 5290 5290 0.02
136 7 15E 38 CC MO 5500 5720 0.073
136 8 15E 38 CC MO 5510 5710 0.054
136 9 15E 38 CC MO 5530 5690 0.047
136 1 15E 38 CC MO 5745 5825 0.078
136 11 15E 38 CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
137 1 15E 38 CC MO 5180 5240 0.072
137 2 15E 38 CC MO 5190 5230 0.06
137 3 15E 38 CC MO 5210 5210 0.014
137 4 15E 38 CC MO 5260 5320 0.066
137 5 15E 38 CC MO 5270 5310 0.057
137 6 15E 38 CC MO 5290 5290 0.02
137 7 15E 38 CC MO 5500 5720 0.073
137 8 15E 38 CC MO 5510 5710 0.054
137 9 15E 38 CC MO 5530 5690 0.047
137 1 15E 38 CC MO 5745 5825 0.078
137 11 15E 38 CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
138 1 15C CC 2402 2480 0.003
138 2 15C CC MO 2412 2472 0.524
138 3 15C CC MO 2422 2462 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
139 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
140 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
141 1 15C CC 2402 2480 0.003
141 2 15C CC MO 2412 2472 0.524
141 3 15C CC MO 2422 2462 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
142 1 15E 38 CC MO 5180 5240 0.072
142 2 15E 38 CC MO 5190 5230 0.06
142 3 15E 38 CC MO 5210 5210 0.014
142 4 15E 38 CC MO 5260 5320 0.066
142 5 15E 38 CC MO 5270 5310 0.057
142 6 15E 38 CC MO 5290 5290 0.02
142 7 15E 38 CC MO 5500 5720 0.073
142 8 15E 38 CC MO 5510 5710 0.054
142 9 15E 38 CC MO 5530 5690 0.047
142 1 15E 38 CC MO 5745 5825 0.078
142 11 15E 38 CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
143 1 15C CC 2402 2480 0.003
143 2 15C CC MO 2412 2462 0.524
143 3 15C CC MO 2422 2452 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
144 1 15E 38 CC MO 5180 5240 0.072
144 2 15E 38 CC MO 5190 5230 0.06
144 3 15E 38 CC MO 5210 5210 0.014
144 4 15E 38 CC MO 5260 5320 0.066
144 5 15E 38 CC MO 5270 5310 0.057
144 6 15E 38 CC MO 5290 5290 0.02
144 7 15E 38 CC MO 5500 5720 0.073
144 8 15E 38 CC MO 5510 5710 0.054
144 9 15E 38 CC MO 5530 5690 0.047
144 1 15E 38 CC MO 5745 5825 0.078
144 11 15E 38 CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
145 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
146 1 15C CC 2402 2480 0.003
146 2 15C CC MO 2412 2472 0.524
146 3 15C CC MO 2422 2462 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
147 1 15E 38 CC MO 5180 5240 0.072
147 2 15E 38 CC MO 5190 5230 0.06
147 3 15E 38 CC MO 5210 5210 0.014
147 4 15E 38 CC MO 5260 5320 0.066
147 5 15E 38 CC MO 5270 5310 0.057
147 6 15E 38 CC MO 5290 5290 0.02
147 7 15E 38 CC MO 5500 5720 0.073
147 8 15E 38 CC MO 5510 5710 0.054
147 9 15E 38 CC MO 5530 5690 0.047
147 1 15E 38 CC MO 5745 5825 0.078
147 11 15E 38 CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
148 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
149 1 15C CC 2402 2480 0.003
149 2 15C CC MO 2412 2472 0.524
149 3 15C CC MO 2422 2462 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
150 1 15E 38 CC MO 5180 5240 0.072
150 2 15E 38 CC MO 5190 5230 0.06
150 3 15E 38 CC MO 5210 5210 0.014
150 4 15E 38 CC MO 5260 5320 0.066
150 5 15E 38 CC MO 5270 5310 0.057
150 6 15E 38 CC MO 5290 5290 0.02
150 7 15E 38 CC MO 5500 5720 0.073
150 8 15E 38 CC MO 5510 5710 0.054
150 9 15E 38 CC MO 5530 5690 0.047
150 1 15E 38 CC MO 5745 5825 0.078
150 11 15E 38 CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
151 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
152 1 15C CC 2402 2480 0.003
152 2 15C CC MO 2412 2472 0.524
152 3 15C CC MO 2422 2462 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
153 1 15E 38 CC MO 5180 5240 0.072
153 2 15E 38 CC MO 5190 5230 0.06
153 3 15E 38 CC MO 5210 5210 0.014
153 4 15E 38 CC MO 5260 5320 0.066
153 5 15E 38 CC MO 5270 5310 0.057
153 6 15E 38 CC MO 5290 5290 0.02
153 7 15E 38 CC MO 5500 5720 0.073
153 8 15E 38 CC MO 5510 5710 0.054
153 9 15E 38 CC MO 5530 5690 0.047
153 1 15E 38 CC MO 5745 5825 0.078
153 11 15E 38 CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
154 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
155 1 15C CC 2402 2480 0.003
155 2 15C CC MO 2412 2472 0.524
155 3 15C CC MO 2422 2462 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
156 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
157 1 15E 38 CC MO 5180 5240 0.072
157 2 15E 38 CC MO 5190 5230 0.06
157 3 15E 38 CC MO 5210 5210 0.014
157 4 15E 38 CC MO 5260 5320 0.066
157 5 15E 38 CC MO 5270 5310 0.057
157 6 15E 38 CC MO 5290 5290 0.02
157 7 15E 38 CC MO 5500 5720 0.073
157 8 15E 38 CC MO 5510 5710 0.054
157 9 15E 38 CC MO 5530 5690 0.047
157 1 15E 38 CC MO 5745 5825 0.078
157 11 15E 38 CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
158 1 15E 38 CC MO 5180 5240 0.072
158 2 15E 38 CC MO 5190 5230 0.06
158 3 15E 38 CC MO 5210 5210 0.014
158 4 15E 38 CC MO 5260 5320 0.066
158 5 15E 38 CC MO 5270 5310 0.057
158 6 15E 38 CC MO 5290 5290 0.02
158 7 15E 38 CC MO 5500 5720 0.073
158 8 15E 38 CC MO 5510 5710 0.054
158 9 15E 38 CC MO 5530 5690 0.047
158 1 15E 38 CC MO 5745 5825 0.078
158 11 15E 38 CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
159 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
160 1 15C CC 2402 2480 0.03
160 2 15C CC MO 2412 2462 0.524
160 3 15C CC MO 2422 2452 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
161 1 15E 38 CC MO 5180 5240 0.072
161 2 15E 38 CC MO 5190 5230 0.06
161 3 15E 38 CC MO 5210 5210 0.014
161 4 15E 38 CC MO 5260 5320 0.066
161 5 15E 38 CC MO 5270 5310 0.057
161 6 15E 38 CC MO 5290 5290 0.02
161 7 15E 38 CC MO 5500 5720 0.073
161 8 15E 38 CC MO 5510 5710 0.054
161 9 15E 38 CC MO 5530 5690 0.047
161 1 15E 38 CC MO 5745 5825 0.078
161 11 15E 38 CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
162 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
163 1 15C CC MO 2402 2480 0.003
163 2 15C CC MO 2412 2462 0.524
163 3 15C CC MO 2422 2452 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
164 1 15C CC 2402 2480 0.03
164 2 15C CC MO 2412 2462 0.524
164 3 15C CC MO 2422 2452 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
165 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
166 1 15E 38 CC MO 5180 5240 0.072
166 2 15E 38 CC MO 5190 5230 0.06
166 3 15E 38 CC MO 5210 5210 0.014
166 4 15E 38 CC MO 5260 5320 0.066
166 5 15E 38 CC MO 5270 5310 0.057
166 6 15E 38 CC MO 5290 5290 0.02
166 7 15E 38 CC MO 5500 5720 0.073
166 8 15E 38 CC MO 5510 5710 0.054
166 9 15E 38 CC MO 5530 5690 0.047
166 1 15E 38 CC MO 5745 5825 0.078
166 11 15E 38 CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
167 1 15E 38 CC MO 5180 5240 0.072
167 2 15E 38 CC MO 5190 5230 0.06
167 3 15E 38 CC MO 5210 5210 0.014
167 4 15E 38 CC MO 5260 5320 0.066
167 5 15E 38 CC MO 5270 5310 0.057
167 6 15E 38 CC MO 5290 5290 0.02
167 7 15E 38 CC MO 5500 5720 0.073
167 8 15E 38 CC MO 5510 5710 0.054
167 9 15E 38 CC MO 5530 5690 0.047
167 1 15E 38 CC MO 5745 5825 0.078
167 11 15E 38 CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
168 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
169 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
170 1 15E 38 CC MO 5180 5240 0.072
170 2 15E 38 CC MO 5190 5230 0.06
170 3 15E 38 CC MO 5210 5210 0.014
170 4 15E 38 CC MO 5260 5320 0.066
170 5 15E 38 CC MO 5270 5310 0.057
170 6 15E 38 CC MO 5290 5290 0.02
170 7 15E 38 CC MO 5500 5720 0.073
170 8 15E 38 CC MO 5510 5710 0.054
170 9 15E 38 CC MO 5530 5690 0.047
170 1 15E 38 CC MO 5745 5825 0.078
170 11 15E 38 CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
171 1 15C CC 2402 2480 0.003
171 2 15C CC MO 2412 2472 0.524
171 3 15C CC MO 2422 2462 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
172 1 15C CC 2402 2480 0.03
172 2 15C CC MO 2412 2462 0.524
172 3 15C CC MO 2422 2452 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
173 1 15C CC 2402 2480 0.03
173 2 15C CC MO 2412 2462 0.524
173 3 15C CC MO 2422 2452 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
174 1 15E 38 CC MO 5180 5240 0.072
174 2 15E 38 CC MO 5190 5230 0.06
174 3 15E 38 CC MO 5210 5210 0.014
174 4 15E 38 CC MO 5260 5320 0.066
174 5 15E 38 CC MO 5270 5310 0.057
174 6 15E 38 CC MO 5290 5290 0.02
174 7 15E 38 CC MO 5500 5720 0.073
174 8 15E 38 CC MO 5510 5710 0.054
174 9 15E 38 CC MO 5530 5690 0.047
174 1 15E 38 CC MO 5745 5825 0.078
174 11 15E 38 CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
175 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
176 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
177 1 15E 38 CC MO 5180 5240 0.072
177 2 15E 38 CC MO 5190 5230 0.06
177 3 15E 38 CC MO 5210 5210 0.014
177 4 15E 38 CC MO 5260 5320 0.066
177 5 15E 38 CC MO 5270 5310 0.057
177 6 15E 38 CC MO 5290 5290 0.02
177 7 15E 38 CC MO 5500 5720 0.073
177 8 15E 38 CC MO 5510 5710 0.054
177 9 15E 38 CC MO 5530 5690 0.047
177 1 15E 38 CC MO 5745 5825 0.078
177 11 15E 38 CC MO 5755 5795 0.059
177 12 15E 38 CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
178 1 15C CC 2402 2480 0.003
178 2 15C CC MO 2412 2472 0.524
178 3 15C CC MO 2422 2462 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
179 1 15C CC 2402 2480 0.003
179 2 15C CC MO 2412 2462 0.524
179 3 15C CC MO 2422 2462 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
180 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
181 1 15E 38 CC MO 5180 5240 0.072
181 2 15E 38 CC MO 5190 5230 0.06
181 3 15E 38 CC MO 5210 5210 0.014
181 4 15E 38 CC MO 5260 5320 0.066
181 5 15E 38 CC MO 5270 5310 0.057
181 6 15E 38 CC MO 5290 5290 0.02
181 7 15E 38 CC MO 5500 5720 0.073
181 8 15E 38 CC MO 5510 5710 0.054
181 9 15E 38 CC MO 5530 5690 0.047
181 1 15E 38 CC MO 5745 5825 0.078
181 11 15E 38 CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
182 1 15E 38 CC MO 5180 5240 0.072
182 2 15E 38 CC MO 5260 5320 0.066
182 3 15E 38 CC MO 5500 5720 0.073
182 4 15E 38 CC MO 5745 5825 0.078
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
183 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
184 1 15E 38 CC MO 5180 5240 0.072
184 2 15E 38 CC MO 5260 5320 0.066
184 3 15E 38 CC MO 5500 5720 0.073
184 4 15E 38 CC MO 5745 5825 0.078
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
185 1 15C CC 2402 2480 0.003
185 2 15C CC MO 2412 2472 0.524
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
186 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
187 1 15C CC 2402 2480 0.003
187 2 15C CC MO 2412 2472 0.524
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
188 1 15E 38 CC MO 5180 5240 0.072
188 2 15E 38 CC MO 5190 5230 0.06
188 3 15E 38 CC MO 5210 5210 0.014
188 4 15E 38 CC MO 5260 5320 0.066
188 5 15E 38 CC MO 5270 5310 0.057
188 6 15E 38 CC MO 5290 5290 0.02
188 7 15E 38 CC MO 5500 5720 0.073
188 8 15E 38 CC MO 5510 5710 0.054
188 9 15E 38 CC MO 5530 5690 0.047
188 1 15E 38 CC MO 5745 5825 0.078
188 11 15E 38 CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
189 1 15C CC 2402 2480 0.003
189 2 15C CC MO 2412 2462 0.524
189 3 15C CC MO 2422 2452 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
190 1 15C CC 2402.00000000 2480.00000000 0.0210000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
191 1 15C CC 2402 2480 0.003
191 2 15C CC MO 2412 2462 0.524
191 3 15C CC MO 2422 2452 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
192 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
193 1 15E 38 CC MO 5180 5240 0.072
193 2 15E 38 CC MO 5190 5230 0.06
193 3 15E 38 CC MO 5210 5210 0.014
193 4 15E 38 CC MO 5260 5320 0.066
193 5 15E 38 CC MO 5270 5310 0.057
193 6 15E 38 CC MO 5290 5290 0.02
193 7 15E 38 CC MO 5500 5720 0.073
193 8 15E 38 CC MO 5510 5710 0.054
193 9 15E 38 CC MO 5530 5690 0.047
193 1 15E 38 CC MO 5745 5825 0.078
193 11 15E 38 CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
194 1 15E 38 CC MO 5180 5240 0.072
194 2 15E 38 CC MO 5190 5230 0.06
194 3 15E 38 CC MO 5210 5210 0.014
194 4 15E 38 CC MO 5260 5320 0.066
194 5 15E 38 CC MO 5270 5310 0.057
194 6 15E 38 CC MO 5290 5290 0.02
194 7 15E 38 CC MO 5500 5720 0.073
194 8 15E 38 CC MO 5510 5710 0.054
194 9 15E 38 CC MO 5530 5690 0.047
194 1 15E 38 CC MO 5745 5825 0.078
194 11 15E 38 CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
195 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
196 1 15E 38 CC MO 5180 5240 0.072
196 2 15E 38 CC MO 5190 5230 0.06
196 3 15E 38 CC MO 5210 5210 0.014
196 4 15E 38 CC MO 5260 5320 0.066
196 5 15E 38 CC MO 5270 5310 0.057
196 6 15E 38 CC MO 5290 5290 0.02
196 7 15E 38 CC MO 5500 5720 0.073
196 8 15E 38 CC MO 5510 5710 0.054
196 9 15E 38 CC MO 5530 5690 0.047
196 1 15E 38 CC MO 5745 5825 0.078
196 11 15E 38 CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
197 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
198 1 15C CC 2402 2480 0.003
198 2 15C CC MO 2412 2462 0.524
198 3 15C CC MO 2422 2452 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
199 1 15C CC 2402 2480 0.003
199 2 15C CC MO 2412 2462 0.524
199 3 15C CC MO 2422 2452 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
200 1 15E 38 CC MO 5180 5240 0.072
200 2 15E 38 CC MO 5190 5230 0.06
200 3 15E 38 CC MO 5210 5210 0.014
200 4 15E 38 CC MO 5260 5320 0.066
200 5 15E 38 CC MO 5270 5310 0.057
200 6 15E 38 CC MO 5290 5290 0.02
200 7 15E 38 CC MO 5500 5720 0.073
200 8 15E 38 CC MO 5510 5710 0.054
200 9 15E 38 CC MO 5530 5690 0.047
200 1 15E 38 CC MO 5745 5825 0.078
200 11 15E 38 CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
201 1 15C CC 2402 2480 0.003
201 2 15C CC MO 2412 2462 0.524
201 3 15C CC MO 2422 2452 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
202 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
203 1 15C CC 2402 2480 0.003
203 2 15C CC MO 2412 2472 0.524
203 3 15C CC MO 2422 2462 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
204 1 15E 38 CC MO 5180 5240 0.072
204 2 15E 38 CC MO 5190 5230 0.06
204 3 15E 38 CC MO 5210 5210 0.014
204 4 15E 38 CC MO 5260 5320 0.066
204 5 15E 38 CC MO 5270 5310 0.057
204 6 15E 38 CC MO 5290 5290 0.02
204 7 15E 38 CC MO 5500 5720 0.073
204 8 15E 38 CC MO 5510 5710 0.054
204 9 15E 38 CC MO 5530 5690 0.047
204 1 15E 38 CC MO 5745 5825 0.078
204 11 15E 38 CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
205 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
206 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
207 1 15C CC 2402 2480 0.003
207 2 15C CC MO 2412 2472 0.524
207 3 15C CC MO 2422 2462 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
208 1 15E 38 CC MO 5180 5240 0.072
208 2 15E 38 CC MO 5190 5230 0.06
208 3 15E 38 CC MO 5210 5210 0.014
208 4 15E 38 CC MO 5260 5320 0.066
208 5 15E 38 CC MO 5270 5310 0.057
208 6 15E 38 CC MO 5290 5290 0.02
208 7 15E 38 CC MO 5500 5720 0.073
208 8 15E 38 CC MO 5510 5710 0.054
208 9 15E 38 CC MO 5530 5690 0.047
208 1 15E 38 CC MO 5745 5825 0.078
208 11 15E 38 CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
209 1 15C CC 2402 2480 0.003
209 2 15C CC MO 2412 2462 0.524
209 3 15C CC MO 2422 2452 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
210 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
211 1 15E 38 CC MO 5180 5240 0.072
211 2 15E 38 CC MO 5260 5320 0.066
211 3 15E 38 CC MO 5500 5720 0.073
211 4 15E 38 CC MO 5745 5825 0.078
211 5 15E 38 CC MO 5190 5230 0.06
211 6 15E 38 CC MO 5270 5310 0.057
211 7 15E 38 CC MO 5510 5710 0.054
211 8 15E 38 CC MO 5210 5210 0.014
211 9 15E 38 CC MO 5290 5290 0.02
211 1 15E 38 CC MO 5530 5690 0.047
211 11 15E 38 CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
212 1 15E 38 CC MO 5180 5240 0.072
212 2 15E 38 CC MO 5190 5230 0.06
212 3 15E 38 CC MO 5210 5210 0.014
212 4 15E 38 CC MO 5260 5320 0.066
212 5 15E 38 CC MO 5270 5310 0.057
212 6 15E 38 CC MO 5290 5290 0.02
212 7 15E 38 CC MO 5500 5720 0.073
212 8 15E 38 CC MO 5510 5710 0.054
212 9 15E 38 CC MO 5530 5690 0.047
212 1 15E 38 CC MO 5745 5825 0.078
212 11 15E 38 CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
213 1 15C CC 2402 2480 0.003
213 2 15C CC MO 2412 2462 0.524
213 3 15C CC MO 2422 2452 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
214 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
215 1 15E 38 CC MO 5180 5240 0.072
215 2 15E 38 CC MO 5190 5230 0.06
215 3 15E 38 CC MO 5210 5210 0.014
215 4 15E 38 CC MO 5260 5320 0.066
215 5 15E 38 CC MO 5270 5310 0.057
215 6 15E 38 CC MO 5290 5290 0.02
215 7 15E 38 CC MO 5500 5720 0.073
215 8 15E 38 CC MO 5510 5710 0.054
215 9 15E 38 CC MO 5530 5690 0.047
215 1 15E 38 CC MO 5745 5825 0.078
215 11 15E 38 CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
216 1 15C CC 2402 2480 0.003
216 2 15C CC MO 2412 2462 0.524
216 3 15C CC MO 2422 2452 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
217 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
218 1 15C CC 2402 2480 0.003
218 2 15C CC MO 2412 2462 0.524
218 3 15C CC MO 2422 2452 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
219 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
220 1 15E 38 CC MO 5180 5240 0.072
220 2 15E 38 CC MO 5190 5230 0.06
220 3 15E 38 CC MO 5210 5210 0.014
220 4 15E 38 CC MO 5260 5320 0.066
220 5 15E 38 CC MO 5270 5310 0.057
220 6 15E 38 CC MO 5290 5290 0.02
220 7 15E 38 CC MO 5500 5720 0.073
220 8 15E CC MO 5510 5710 0.054
220 9 15E 38 CC MO 5530 5690 0.047
220 1 15E 38 CC MO 5745 5825 0.078
220 11 15E 38 CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
221 1 15C CC 2402 2480 0.003
221 2 15C CC MO 2412 2462 0.524
221 3 15C CC MO 2422 2452 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
222 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
223 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
224 1 15E 38 CC MO 5180 5240 0.072
224 2 15E 38 CC MO 5190 5230 0.06
224 3 15E 38 CC MO 5210 5210 0.014
224 4 15E 38 CC MO 5260 5320 0.066
224 5 15E 38 CC MO 5270 5310 0.057
224 6 15E 38 CC MO 5290 5290 0.02
224 7 15E 38 CC MO 5500 5720 0.073
224 8 15E 38 CC MO 5510 5710 0.054
224 9 15E 38 CC MO 5530 5690 0.047
224 1 15E 38 CC MO 5745 5825 0.078
224 11 15E 38 CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
225 1 15E 38 CC MO 5180 5240 0.072
225 2 15E 38 CC MO 5260 5320 0.066
225 3 15E 38 CC MO 5500 5720 0.073
225 4 15E 38 CC MO 5745 5825 0.078
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
226 1 15C CC 2402 2480 0.003
226 2 15C CC MO 2412 2472 0.524
226 3 15C CC MO 2422 2462 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
227 1 15C CC 2402 2480 0.003
227 2 15C CC MO 2412 2472 0.524
227 3 15C CC MO 2422 2462 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
228 1 15E 38 CC MO 5180 5240 0.072
228 2 15E 38 CC MO 5260 5320 0.066
228 3 15E 38 CC MO 5500 5720 0.073
228 4 15E 38 CC MO 5745 5825 0.078
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
229 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
230 1 15C CC 2402 2480 0.003
230 2 15C CC MO 2412 2462 0.524
230 3 15C CC MO 2422 2452 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
231 1 15E 38 CC MO 5180 5240 0.072
231 2 15E 38 CC MO 5190 5230 0.06
231 3 15E 38 CC MO 5210 5210 0.014
231 4 15E 38 CC MO 5260 5320 0.066
231 5 15E 38 CC MO 5270 5310 0.057
231 6 15E 38 CC MO 5290 5290 0.02
231 7 15E 38 CC MO 5500 5720 0.073
231 8 15E 38 CC MO 5510 5710 0.054
231 9 15E 38 CC MO 5530 5690 0.047
231 1 15E 38 CC MO 5745 5825 0.078
231 11 15E 38 CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
232 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
233 1 15C CC 2402.00000000 2480.00000000 0.0040000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
234 1 15E 38 CC MO 5180 5240 0.072
234 2 15E 38 CC MO 5190 5230 0.06
234 3 15E 38 CC MO 5210 5210 0.014
234 4 15E 38 CC MO 5260 5320 0.066
234 5 15E 38 CC MO 5270 5310 0.057
234 6 15E 38 CC MO 5290 5290 0.02
234 7 15E 38 CC MO 5500 5720 0.073
234 8 15E 38 CC MO 5510 5710 0.054
234 9 15E 38 CC MO 5530 5690 0.047
234 1 15E 38 CC MO 5745 5825 0.078
234 11 15E 38 CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
235 1 15C CC 2402 2480 0.003
235 2 15C CC MO 2412 2462 0.524
235 3 15C CC MO 2422 2452 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
236 1 15C CC 2402 2480 0.003
236 2 15C CC MO 2412 2462 0.524
236 3 15C CC MO 2422 2452 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
237 1 15E 38 CC MO 5180 5240 0.072
237 2 15E 38 CC MO 5190 5230 0.06
237 3 15E 38 CC MO 5210 5210 0.014
237 4 15E 38 CC MO 5260 5320 0.066
237 5 15E 25 CC MO 5270 5310 0.057
237 6 15E 38 CC MO 5290 5290 0.02
237 7 15E 38 CC MO 5500 5720 0.073
237 8 15E 38 CC MO 5510 5710 0.054
237 9 15E 38 CC MO 5530 5690 0.047
237 1 15E 38 CC MO 5745 5825 0.078
237 11 15E 38 CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
238 1 15C CC 2402.00000000 2480.00000000 0.0040000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
239 1 15E 38 CC MO 5180 5240 0.072
239 2 15E 38 CC MO 5190 5230 0.06
239 3 15E 38 CC MO 5210 5210 0.014
239 4 15E 38 CC MO 5260 5320 0.066
239 5 15E 38 CC MO 5270 5310 0.057
239 6 15E 38 CC MO 5290 5290 0.02
239 7 15E 38 CC MO 5500 5720 0.073
239 8 15E 38 CC MO 5510 5710 0.054
239 9 15E 38 CC MO 5530 5690 0.047
239 1 15E 38 CC MO 5745 5825 0.078
239 11 15E 38 CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
240 1 15C CC 2402 2480 0.003
240 2 15C CC MO 2412 2462 0.524
240 3 15C CC MO 2422 2452 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
241 1 15C CC 2402.00000000 2480.00000000 0.0040000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
242 1 15C CC 2402.00000000 2480.00000000 0.0040000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
243 1 15E 38 CC MO 5180 5240 0.072
243 2 15E 38 CC MO 5190 5230 0.06
243 3 15E 38 CC MO 5210 5210 0.014
243 4 15E 38 CC MO 5260 5320 0.066
243 5 15E 38 CC MO 5270 5310 0.057
243 6 15E 38 CC MO 5290 5290 0.02
243 7 15E 38 CC MO 5500 5720 0.073
243 8 15E 38 CC MO 5510 5710 0.054
243 9 15E 38 CC MO 5530 5690 0.047
243 1 15E 38 CC MO 5745 5825 0.078
243 11 15E 38 CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
244 1 15C CC 2402 2480 0.003
244 2 15C CC MO 2412 2462 0.524
244 3 15C CC MO 2422 2452 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
245 1 15E 38 CC MO 5180 5240 0.072
245 2 15E 38 CC MO 5190 5230 0.06
245 3 15E 38 CC MO 5210 5210 0.014
245 4 15E 38 CC MO 5260 5320 0.066
245 5 15E 38 CC MO 5270 5310 0.057
245 6 15E 38 CC MO 5290 5290 0.02
245 7 15E 38 CC MO 5500 5720 0.073
245 8 15E 38 CC MO 5510 5710 0.054
245 9 15E 38 CC MO 5530 5690 0.047
245 1 15E 38 CC MO 5745 5825 0.078
245 11 15E 38 CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
246 1 15C CC 2402.00000000 2480.00000000 0.0040000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
247 1 15C CC 2402 2480 0.003
247 2 15C CC MO 2412 2462 0.524
247 3 15C CC MO 2422 2452 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
248 1 15C CC MO 2402 2480 0.003
248 2 15C CC MO 2412 2472 0.524
248 3 15C CC MO 2422 2462 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
249 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
250 1 15E 38 CC MO 5180 5240 0.072
250 2 15E 38 CC MO 5190 5230 0.06
250 3 15E 38 CC MO 5210 5210 0.014
250 4 15E 38 CC MO 5260 5320 0.066
250 5 15E 38 CC MO 5270 5310 0.057
250 6 15E 38 CC MO 5290 5290 0.02
250 7 15E 38 CC MO 5500 5720 0.073
250 8 15E 38 CC MO 5510 5710 0.054
250 9 15E 38 CC MO 5530 5690 0.047
250 1 15E 38 CC MO 5745 5825 0.078
250 11 15E 38 CC MO 5755 5795 0.059
250 12 15E 38 CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
251 1 15C CC 2402 2480 0.003
251 2 15C CC MO 2412 2472 0.524
251 3 15C CC MO 2422 2462 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
252 1 15E 38 CC MO 5180 5240 0.072
252 2 15E 38 CC MO 5190 5230 0.06
252 3 15E 38 CC MO 5210 5210 0.014
252 4 15E 38 CC MO 5260 5320 0.066
252 5 15E 38 CC MO 5270 5310 0.057
252 6 15E 38 CC MO 5290 5290 0.02
252 7 15E 38 CC MO 5500 5720 0.073
252 8 15E 38 CC MO 5510 5710 0.054
252 9 15E 38 CC MO 5530 5690 0.047
252 1 15E 38 CC MO 5745 5825 0.078
252 11 15E 38 CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
253 1 15C CC 2402.00000000 2480.00000000 0.0040000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
254 1 15E 38 CC MO 5180 5240 0.072
254 2 15E 38 CC MO 5190 5230 0.06
254 3 15E 38 CC MO 5210 5210 0.014
254 4 15E 38 CC MO 5260 5320 0.066
254 5 15E 38 CC MO 5270 5310 0.057
254 6 15E 38 CC MO 5290 5290 0.02
254 7 15E 38 CC MO 5500 5720 0.073
254 8 15E 38 CC MO 5510 5710 0.054
254 9 15E 38 CC MO 5530 5690 0.047
254 1 15E 38 CC MO 5745 5825 0.78
254 11 15E 38 CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
255 1 15C CC 2402.00000000 2480.00000000 0.0040000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
256 1 15C CC 2402 2480 0.003
256 2 15C CC MO 2412 2462 0.524
256 3 15C CC MO 2422 2452 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
257 1 15E 38 CC MO 5180 5240 0.072
257 2 15E 38 CC MO 5190 5230 0.06
257 3 15E 38 CC MO 5210 5210 0.014
257 4 15E 38 CC MO 5260 5320 0.066
257 5 15E 38 CC MO 5270 5310 0.057
257 6 15E 38 CC MO 5290 5290 0.02
257 7 15E 38 CC MO 5500 5720 0.073
257 8 15E 38 CC MO 5510 5710 0.054
257 9 15E 38 CC MO 5530 5690 0.047
257 1 15E 38 CC MO 5745 5825 0.078
257 11 15E 38 CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
258 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
259 1 15C CC 2402 2480 0.003
259 2 15C CC MO 2412 2462 0.524
259 3 15C CC MO 2422 2452 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
260 1 15C CC 2402 2480 0.003
260 2 15C CC MO 2412 2472 0.524
260 3 15C CC MO 2422 2462 0.484
260 4 15C CC MO 5745 5825 0.256
260 5 15C CC MO 5775 5795 0.23
260 6 15C CC MO 5775 5775 0.326
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
261 1 15E 38 CC MO 5180 5240 0.06
261 2 15E 38 CC MO 5190 5230 0.056
261 3 15E 38 CC MO 5210 5210 0.021
261 4 15E 38 CC MO 5260 5320 0.062
261 5 15E 38 CC MO 5270 5310 0.056
261 6 15E 38 CC MO 5290 5290 0.031
261 7 15E 38 CC MO 5500 5720 0.063
261 8 15E 38 CC MO 5510 5710 0.054
261 9 15E 38 CC MO 5530 5690 0.054
261 1 15E 38 CC MO 5745 5825 0.058
261 11 15E 38 CC MO 5755 5795 0.059
261 12 15E 38 CC MO 5775 5775 0.046
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
262 1 15C CC MO 2412 2472 0.524
262 2 15C CC MO 2422 2462 0.484
262 3 15C CC MO 2402 2480 0.003
262 4 15C CC MO 5745 5825 0.256
262 5 15C CC MO 5775 5795 0.23
262 6 15C CC MO 5775 5775 0.326
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
263 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
264 1 15E 38 CC MO 5745 5825 0.062
264 2 15E 38 CC MO 5755 5795 0.062
264 3 15E 38 CC MO 5775 5775 0.045
264 4 15E 38 CC MO 5180 5240 0.063
264 5 15E 38 CC MO 5190 5230 0.056
264 6 15E 38 CC MO 5210 5210 0.019
264 7 15E 38 CC MO 5260 5320 0.062
264 8 15E 38 CC MO 5270 5310 0.056
264 9 15E 38 CC MO 5290 5290 0.026
264 1 15E 38 CC MO 5500 5720 0.063
264 11 15E 38 CC MO 5510 5710 0.056
264 12 15E 38 CC MO 5530 5690 0.055
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
265 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
266 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
267 1 15E 38 CC MO 5180 5240 0.072
267 2 15E 38 CC MO 5190 5230 0.06
267 3 15E 38 CC MO 5210 5210 0.014
267 4 15E 38 CC MO 5260 5320 0.066
267 5 15E 38 CC MO 5270 5310 0.057
267 6 15E 38 CC MO 5290 5290 0.02
267 7 15E 38 CC MO 5500 5720 0.073
267 8 15E 38 CC MO 5510 5710 0.054
267 9 15E 38 CC MO 5530 5690 0.047
267 1 15E 38 CC MO 5745 5825 0.078
267 11 15E 38 CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
268 1 15C CC 2402 2480 0.003
268 2 15C CC MO 2412 2472 0.524
268 3 15C CC MO 2422 2462 0.484
268 4 15C CC MO 5745 5825 0.256
268 5 15C CC MO 5775 5795 0.23
268 6 15C CC MO 5775 5775 0.326
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
269 1 15E 38 CC MO 5180 5240 0.072
269 2 15E 38 CC MO 5190 5230 0.06
269 3 15E 38 CC MO 5210 5210 0.014
269 4 15E 38 CC MO 5260 5320 0.066
269 5 15E 38 CC MO 5270 5310 0.057
269 6 15E 38 CC MO 5290 5290 0.02
269 7 15E 38 CC MO 5500 5720 0.073
269 8 15E 38 CC MO 5510 5710 0.054
269 9 15E 38 CC MO 5530 5690 0.047
269 1 15E 38 CC MO 5745 5825 0.078
269 11 15E 38 CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
270 1 15C CC 2402 2480 0.003
270 2 15C CC MO 2412 2462 0.524
270 3 15C CC MO 2422 2452 0.484
270 4 15C CC MO 5745 5825 0.256
270 5 15C CC MO 5775 5795 0.23
270 6 15C CC MO 5775 5775 0.326
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
271 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
272 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
273 1 15C CC 2402 2480 0.003
273 2 15C CC MO 2412 2472 0.524
273 3 15C CC MO 2422 2462 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
274 1 15E 38 CC MO 5180 5240 0.072
274 2 15E 38 CC MO 5190 5230 0.06
274 3 15E 38 CC MO 5210 5210 0.014
274 4 15E 38 CC MO 5260 5320 0.066
274 5 15E 38 CC MO 5270 5310 0.057
274 6 15E 38 CC ND 5290 5290 0.02
274 7 15E 38 CC MO 5500 5720 0.073
274 8 15E 38 CC MO 5510 5710 0.054
274 9 15E 38 CC MO 5530 5690 0.047
274 1 15E 38 CC MO 5745 5825 0.078
274 11 15E 38 CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
275 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
276 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
277 1 15C CC 2402 2480 0.003
277 2 15C CC MO 2412 2462 0.524
277 3 15C CC MO 2422 2452 0.484
277 4 15C CC MO 5745 5825 0.256
277 5 15C CC MO 5755 5795 0.23
277 6 15C CC MO 5775 5775 0.326
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
278 1 15C CC 2402 2480 0.003
278 2 15C CC MO 2412 2472 0.524
278 3 15C CC MO 2422 2462 0.484
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
279 1 15E 38 CC MO 5180 5240 0.072
279 2 15E 38 CC MO 5190 5230 0.06
279 3 15E 38 CC MO 5210 5210 0.014
279 4 15E 38 CC MO 5260 5320 0.066
279 5 15E 38 CC MO 5270 5310 0.057
279 6 15E 38 CC MO 5290 5290 0.02
279 7 15E 38 CC MO 5500 5720 0.073
279 8 15E 38 CC MO 5510 5710 0.054
279 9 15E 38 CC MO 5530 5690 0.047
279 1 15E 38 CC MO 5745 5825 0.078
279 11 15E 38 CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
280 1 15E 38 CC MO 5180 5240 0.072
280 2 15E 38 CC MO 5190 5230 0.06
280 3 15E 38 CC MO 5210 5210 0.014
280 4 15E 38 CC MO 5260 5320 0.066
280 5 15E 38 CC MO 5270 5310 0.057
280 6 15E 38 CC MO 5290 5290 0.02
280 7 15E 38 CC MO 5500 5720 0.073
280 8 15E 38 CC MO 5510 5710 0.054
280 9 15E 38 CC MO 5530 5690 0.047
280 1 15E 38 CC MO 5745 5825 0.078
280 11 15E 38 CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
281 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
282 1 15E 39 CC MO 5180 5240 0.072
282 2 15E 39 CC MO 5190 5230 0.06
282 3 15E 39 CC MO 5210 5210 0.014
282 4 15E 39 CC MO 5260 5320 0.066
282 5 15E 39 CC MO 5270 5310 0.057
282 6 15E 39 CC MO 5290 5290 0.02
282 7 15E 39 CC MO 5500 5720 0.073
282 8 15E 39 CC MO 5510 5710 0.054
282 9 15E 39 CC MO 5530 5690 0.047
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
283 1 15E 39 CC MO 5180 5240 0.072
283 2 15E 39 CC MO 5190 5230 0.06
283 3 15E 39 CC MO 5210 5210 0.014
283 4 15E 39 CC MO 5260 5320 0.066
283 5 15E 39 CC MO 5270 5310 0.057
283 6 15E 39 CC MO 5290 5290 0.02
283 7 15E 39 CC MO 5500 5720 0.073
283 8 15E 39 CC MO 5510 5710 0.054
283 9 15E 39 CC MO 5530 5690 0.047
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
284 1 15C CC 2402 2480 0.003
284 2 15C CC MO 2412 2472 0.524
284 3 15C CC MO 2422 2462 0.484
284 4 15C CC MO 5745 5825 0.256
284 5 15C CC MO 5755 5795 0.23
284 6 15C CC MO 5775 5775 0.326
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
285 1 15C CC 2402 2480 0.003
285 2 15C CC MO 2412 2472 0.524
285 3 15C CC MO 2422 2462 0.484
285 4 15C CC MO 5745 5825 0.256
285 5 15C CC MO 5755 5795 0.23
285 6 15C CC MO 5775 5775 0.326
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
286 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
287 1 15E 38 CC MO 5180 5240 0.072
287 2 15E 38 CC MO 5190 5230 0.06
287 3 15E 38 CC MO 5210 5210 0.014
287 4 15E 38 CC MO 5260 5320 0.066
287 5 15E 38 CC MO 5270 5310 0.057
287 6 15E 38 CC MO 5290 5290 0.02
287 7 15E 38 CC MO 5500 5720 0.073
287 8 15E 38 CC MO 5510 5710 0.054
287 9 15E 38 CC MO 5530 5690 0.047
287 1 15E 38 CC MO 5745 5825 0.078
287 11 15E 38 CC MO 5775 5775 0.0136
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
288 1 15E 39 CC MO 5180 5240 0.072
288 2 15E 39 CC MO 5190 5230 0.06
288 3 15E 39 CC MO 5210 5210 0.014
288 4 15E 39 CC MO 5260 5320 0.066
288 5 15E 39 CC MO 5270 5310 0.057
288 6 15E 39 CC MO 5290 5290 0.02
288 7 15E 39 CC MO 5500 5720 0.073
288 8 15E 39 CC MO 5510 5710 0.054
288 9 15E 39 CC MO 5530 5690 0.047
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
289 1 15B CC
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
290 1 15C CC 2402.00000000 2480.00000000 0.0200000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
291 1 15C CC 2402 2480 0.003
291 2 15C CC MO 2412 2472 0.524
291 3 15C CC MO 2422 2462 0.484
291 4 15C CC MO 5745 5825 0.256
291 5 15C CC MO 5755 5795 0.23
291 6 15C CC MO 5775 5775 0.326

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC