FCC ID: PPD-AR5B22 PCIE 802.11a/b/g/n 2.4GHz/5GHz + USB BT 4.0 card

by: Qualcomm Atheros, Inc. latest update: 2016-07-11 model: AR5B22

Ninety Seven grants have been issued under this FCC ID from 02/03/2012 to 07/11/2016 (this is one of one hundred and forty-nine releases in 2016 for this grantee). Public details available include manuals, internal & external photos, and frequency information. some products also feature user submitted or linked password defaults, warrantee terms, drivers, troubleshooting guides, & instructions.
permalink for this FCC identifier
search for: Repair details
from iFixIt
Replacement
on Amazon
Trade-in? Recycling locations
eg is reader-supported. when you buy through links on our site, we may earn an affiliate commission.
|
|
|   
eg for Slack usage
app s submitted / available
various Unser Manual Regulatory Users Manual pdf 461.56 KiB March 03 2014
various User Manual Users Manual pdf 885.26 KiB / October 01 2015
various User Manual General Users Manual pdf 4.62 MiB March 03 2014
various User Manual 20160628 v1 - Technical-User Manual (Statement) Users Manual pdf 155.36 KiB November 07 2016 / June 01 2017
various User Manual 20160701 v1 - Technical-User Manual R1 Users Manual pdf 1.84 MiB November 07 2016 / June 01 2017
various Cover Letter(s) pdf November 07 2016
various Cover Letter(s) pdf November 07 2016
various Cover Letter(s) pdf November 07 2016
various Cover Letter(s) pdf November 07 2016
various Cover Letter(s) pdf November 07 2016
various External Photos pdf November 07 2016 / June 01 2017
various ID Label/Location Info pdf November 07 2016
various Internal Photos pdf November 07 2016 / June 01 2017
various RF Exposure Info pdf November 07 2016
various Test Report pdf November 07 2016
various Test Setup Photos pdf November 07 2016 / June 01 2017
various Test Report pdf November 07 2016
various Cover Letter(s) pdf November 07 2016
various RF Exposure Info pdf November 07 2016
various Test Report pdf November 07 2016
various Test Report pdf November 07 2016
various Test Report pdf November 07 2016
various Test Report pdf November 07 2016
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various Test Report pdf
various Test Setup Photos pdf
various Cover Letter(s) pdf September 12 2014
various Cover Letter(s) pdf September 12 2014
various Cover Letter(s) pdf September 12 2014
various Cover Letter(s) pdf September 12 2014
various RF Exposure Info pdf September 12 2014
various Test Setup Photos pdf September 12 2014
various Cover Letter(s) pdf
various External Photos pdf / October 01 2015
various ID Label/Location Info pdf
various Internal Photos pdf / October 01 2015
various Internal Photos pdf / October 01 2015
various ID Label/Location Info pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various Test Report pdf
various Test Setup Photos pdf / October 01 2015
various Test Report pdf
various ID Label/Location Info pdf
various Test Report pdf
various Cover Letter(s) pdf March 03 2014
various External Photos pdf March 03 2014
various Internal Photos pdf March 03 2014
various Cover Letter(s) pdf March 03 2014
various ID Label/Location Info pdf March 03 2014
various Cover Letter(s) pdf March 03 2014
various RF Exposure Info pdf March 03 2014
various RF Exposure Info pdf March 03 2014
various RF Exposure Info pdf March 03 2014
various RF Exposure Info pdf March 03 2014
various Test Setup Photos pdf March 03 2014
various Test Report pdf March 03 2014
various Test Setup Photos pdf March 03 2014
various Cover Letter(s) pdf March 03 2014
various Test Setup Photos pdf March 03 2014
various Test Report pdf March 03 2014
various Test Report pdf March 03 2014
various Test Setup Photos pdf March 03 2014
various Internal Photos pdf March 03 2014
various Test Setup Photos pdf March 03 2014
various Test Report pdf March 03 2014
various Test Setup Photos pdf March 03 2014
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various Attestation Statements pdf
various Internal Photos pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various Cover Letter(s) pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various Cover Letter(s) pdf
various RF Exposure Info pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various Test Setup Photos pdf / April 11 2013
various Cover Letter(s) pdf April 07 2013
various Cover Letter(s) pdf April 07 2013
various Unser Manual Regulatory Users Manual pdf 461.56 KiB March 03 2014
various User Manual Users Manual pdf 885.26 KiB / October 01 2015
various User Manual General Users Manual pdf 4.62 MiB March 03 2014
various User Manual 20160628 v1 - Technical-User Manual (Statement) Users Manual pdf 155.36 KiB November 07 2016 / June 01 2017
various User Manual 20160701 v1 - Technical-User Manual R1 Users Manual pdf 1.84 MiB November 07 2016 / June 01 2017

frequency equipment class purpose
1 2016-07-11 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter Class II Permissive Change
2 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
3 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
4 2422 ~ 2452 DTS - Digital Transmission System
5 2422 ~ 2452 DTS - Digital Transmission System
6 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
7 2015-11-16 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
8 2014-12-09 5510 ~ 5670 NII - Unlicensed National Information Infrastructure TX
9 5755 ~ 5795 DTS - Digital Transmission System
10 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
11 2014-11-26 5510 ~ 5670 NII - Unlicensed National Information Infrastructure TX
12 5755 ~ 5795 DTS - Digital Transmission System
13 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
14 2014-03-03 5510 ~ 5670 NII - Unlicensed National Information Infrastructure TX
15 5755 ~ 5795 DTS - Digital Transmission System
16 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
17 2013-12-16 5510 ~ 5670 NII - Unlicensed National Information Infrastructure TX
18 5755 ~ 5795 DTS - Digital Transmission System
19 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
20 2013-09-20 5510 ~ 5670 NII - Unlicensed National Information Infrastructure TX
21 5755 ~ 5795 DTS - Digital Transmission System
22 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
23 2013-07-04 5755 ~ 5795 DTS - Digital Transmission System
24 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
25 5510 ~ 5670 NII - Unlicensed National Information Infrastructure TX
26 2013-06-18 5755 ~ 5795 DTS - Digital Transmission System
27 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
28 5510 ~ 5670 NII - Unlicensed National Information Infrastructure TX
29 2013-06-13 2402 ~ 2480 DTS - Digital Transmission System
30 5510 ~ 5670 NII - Unlicensed National Information Infrastructure TX
31 5755 ~ 5795 DTS - Digital Transmission System
32 2013-06-11 5510 ~ 5670 NII - Unlicensed National Information Infrastructure TX
33 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
34 5755 ~ 5795 DTS - Digital Transmission System
35 5755 ~ 5795 DTS - Digital Transmission System
36 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
37 5510 ~ 5670 NII - Unlicensed National Information Infrastructure TX
38 2013-06-04 5755 ~ 5795 DTS - Digital Transmission System
39 5510 ~ 5670 NII - Unlicensed National Information Infrastructure TX
40 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
41 2013-06-03 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
42 5755 ~ 5795 DTS - Digital Transmission System
43 5510 ~ 5670 NII - Unlicensed National Information Infrastructure TX
44 2013-04-15 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
45 5510 ~ 5670 NII - Unlicensed National Information Infrastructure TX
46 5755 ~ 5795 DTS - Digital Transmission System
47 2013-04-03 5755 ~ 5795 DTS - Digital Transmission System
48 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
49 5510 ~ 5670 NII - Unlicensed National Information Infrastructure TX
50 2013-03-20 5755 ~ 5795 DTS - Digital Transmission System
51 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
52 5510 ~ 5670 NII - Unlicensed National Information Infrastructure TX
53 2013-03-13 5510 ~ 5670 NII - Unlicensed National Information Infrastructure TX
54 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
55 5755 ~ 5795 DTS - Digital Transmission System
56 2013-02-21 5755 ~ 5795 DTS - Digital Transmission System
57 5510 ~ 5670 NII - Unlicensed National Information Infrastructure TX
58 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
59 2012-12-31 5180 ~ 5240 NII - Unlicensed National Information Infrastructure TX Class II permissive change or modification of presently authorized equipment
60 2402 ~ 2480 DTS - Digital Transmission System
61 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
62 2012-12-23 5510 ~ 5670 NII - Unlicensed National Information Infrastructure TX Class II Permissive Change
63 5755 ~ 5795 DTS - Digital Transmission System
64 2012-12-21 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
65 2012-12-20 5510 ~ 5670 NII - Unlicensed National Information Infrastructure TX
66 5755 ~ 5795 DTS - Digital Transmission System
67 2012-12-17 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
68 5755 ~ 5795 DTS - Digital Transmission System
69 5510 ~ 5670 NII - Unlicensed National Information Infrastructure TX
70 2012-11-22 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
71 5510 ~ 5670 NII - Unlicensed National Information Infrastructure TX
72 5755 ~ 5795 DTS - Digital Transmission System
73 2012-11-14 5510 ~ 5670 NII - Unlicensed National Information Infrastructure TX
74 2012-11-13 5755 ~ 5795 DTS - Digital Transmission System
75 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
76 2012-06-26 5510 ~ 5670 NII - Unlicensed National Information Infrastructure TX
77 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
78 5755 ~ 5795 DTS - Digital Transmission System
79 2012-06-08 5510 ~ 5670 NII - Unlicensed National Information Infrastructure TX
80 5755 ~ 5795 DTS - Digital Transmission System
81 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
82 2012-05-31 5755 ~ 5795 DTS - Digital Transmission System
83 5510 ~ 5670 NII - Unlicensed National Information Infrastructure TX
84 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
85 2012-05-13 5755 ~ 5795 DTS - Digital Transmission System
86 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
87 5510 ~ 5670 NII - Unlicensed National Information Infrastructure TX
88 2012-05-08 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
89 5755 ~ 5795 DTS - Digital Transmission System
90 5510 ~ 5670 NII - Unlicensed National Information Infrastructure TX
91 2012-03-15 5755 ~ 5795 DTS - Digital Transmission System
92 5510 ~ 5670 NII - Unlicensed National Information Infrastructure TX
93 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
94 2012-02-03 JBP - Part 15 Class B Computing Device Peripheral Original Equipment
95 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
96 5755 ~ 5795 DTS - Digital Transmission System
97 5510 ~ 5670 NII - Unlicensed National Information Infrastructure TX

Application Forms

app s Applicant Information
various Effective 2016-07-11
various 2015-11-16
various 2014-12-09
various 2014-11-26
various 2014-03-03
various 2013-12-16
various 2013-09-20
various 2013-07-04
various 2013-06-18
various 2013-06-13
various 2013-06-11
various 2013-06-04
various 2013-06-03
various 2013-04-15
various 2013-04-03
various 2013-03-20
various 2013-03-13
various 2013-02-21
various 2012-12-31
various 2012-12-23
various 2012-12-21
various 2012-12-20
various 2012-12-17
various 2012-11-22
various 2012-11-14
various 2012-11-13
various 2012-06-26
various 2012-06-08
various 2012-05-31
various 2012-05-13
various 2012-05-08
various 2012-03-15
various 2012-02-03
various Applicant's complete, legal business name Qualcomm Atheros, Inc.
various FCC Registration Number (FRN) 0003716743
various Physical Address 1700 Technology Dr
various San Jose, CA
various San Jose, California 95110
various United States
app s TCB Information
various TCB Application Email Address c******@ccsemc.com
various L******@ul.com
various L******@ul.com
various T******@TIMCOENGR.COM
various t******@siemic.com
various TCB Scope A4: UNII devices & low power transmitters using spread spectrum techniques
various A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
app s FCC ID
various Grantee Code PPD
various Equipment Product Code AR5B22
app s Person at the applicant's address to receive grant or for contact
various Name P******** G********
various Title Vice President, Regulatory Engineering
various Telephone Number 858-6********
various Fax Number 858-6********
various E-mail p******@qti.qualcomm.com
app s Technical Contact
various Firm Name Bureau Veritas Consumer Products Services
various Bureau Veritas Consumer Products Services (H.K.) L
various Sporton International Inc.
various Bureau Veritas Consumer Products Services (H.K.)
various Compliance Certification Services
various Name M******** T****
various J******** T****
various A****** H****
various A**** Z******
various N**** C****
various Physical Address No.19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dis
various No.52, HwaYa 1st Rd., Kwei-Shan Hsiang
various No. 19, Hwa Ya 2nd Rd., Kwei Shan Hsiang
various 47173 Benicia Street
various Taoyuan City, 33383
various Taoyuan Hsien, 333
various Fremont, California 94538
various Taiwan
various Telephone Number +886 ********
various 886-3******** Extension:
various (510)******** Extension:
various 886 3******** Extension:
various Fax Number 886-3********
various 88633********
various (510)********
various 886 3********
various E-mail m******@tw.bureauveritas.com
various M******@tw.bureauveritas.com
various E******@Sporton.com.tw,IreneChung@Sporton.com.tw
various a******@tw.bureauveritas.com
various a******@ccsemc.com
various n******@tw.bureauveritas.com
app s Non Technical Contact
various Firm Name Bureau Veritas Consumer Products Services
various Bureau Veritas Consumer Products Services (H.K.) L
various Sporton International Inc.
various Bureau Veritas Consumer Products Services (H.K.)
various Compliance Certification Services
various Name M**** M******
various M**** T****
various J**** T******
various A****** H******
various A******** Z******
various Physical Address No.19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dis
various No.52, HwaYa 1st Rd., Kwei-Shan Hsiang
various No. 19, Hwa Ya 2nd Rd., Kwei Shan Hsiang
various 47173 Benicia Street
various Taoyuan City, 33383
various Taoyuan Hsien, 94538
various Taoyuan Hsien, 333
various Fremont, California 94538
various Taiwan
various Telephone Number +886 ********
various 886-3********
various (510)******** Extension:
various Fax Number 886-3********
various 88633********
various (510)********
various E-mail m******@tw.bureauveritas.com
various M******@tw.bureauveritas.com
various E******@Sporton.com.tw,IreneChung@Sporton.com.tw
various a******@tw.bureauveritas.com
various a******@ccsemc.com
app s Confidentiality (long or short term)
various Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousLong-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousNo
variousIf so, specify the short-term confidentiality release date (MM/DD/YYYY format)01/06/2017
various01/07/2017
various12/31/2015
various12/31/2014
various01/10/2015
various04/17/2014
various11/04/2013
various12/15/2013
various12/10/2013
various12/08/2013
various07/19/2013
various07/18/2013
various09/15/2013
various09/30/2013
various06/30/2013
various03/30/2013
various05/22/2013
various06/29/2013
various02/06/2013
various06/01/2013
various01/31/2013
various05/19/2013
various05/12/2013
various07/01/2012
various11/27/2012
various11/08/2012
various11/04/2012
various09/11/2012
various02/10/2012
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
various Is this application for software defined/cognitive radio authorization?No
variousEquipment ClassDSS - Part 15 Spread Spectrum Transmitter
variousNII - Unlicensed National Information Infrastructure TX
variousDTS - Digital Transmission System
variousJBP - Part 15 Class B Computing Device Peripheral
variousDescription of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)PCIE 802.11a/b/g/n 2.4GHz/5GHz + USB BT 4.0 card
variousPCIE 802.11a/b/g/n 2.4GHz/5GHz + USB BT card
variousPCIE 802.11a/b/g/n 2.4GHz/5GHz+USB BT 4.0 CARD
variousPCIE 802.11a/b/g/n 2.4GHz/5GHz + USB BT 4.0 Card
various802.11 a/b/g/n 2.4GHz/5GHz + USB 4.0 card
variousTablet PC
variousPCIe 802.11 abgn & USB BT Module
variousPCIe 802.11 abgn + USB BT Module
variousPCIE 802.11A/B/G/N 2.4GHZ/5GHZ+USB BT 4.0 CARD
variousPCIE 802.11a/b/g/n 2.4GHz/5Ghz + USB BT 4.0 card
variousPCIE 802.11A/B/G/N 2.4GHZ/5GHZ + USB BT 4.0 CARD
variousRelated OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?No
variousModular Equipment TypeSingle Modular Approval
variousDoes not apply
variousPurpose / Application is forClass II Permissive Change
variousClass II permissive change or modification of presently authorized equipment
variousOriginal Equipment
variousComposite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?Yes
variousRelated Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
variousYes
variousGrant CommentsClass II permissive change to add Dell N01PC host computer and antennas as described in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 20 cm from all persons.
variousClass II permissive change to add Dell N01PC host computer and antennas as described in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Operations in 5.15-5.25 GHz and 5.47-5.725 GHz bands are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 20 cm from all persons.
variousClass II permissive change to add Dell N02PC host computer and antennas as described in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Operations in 5.15-5.25 GHz and 5.47-5.725 GHz bands are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 20 cm from all persons.
variousClass II permissive change to add Dell N01PC host computer and antennas as described in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 20 cm from all persons.
variousClass II permissive change to add Dell N02PC host computer and antennas as described in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 20 cm from all persons.
variousClass II permissive change to add Dell N02PC host computer and antennas as described in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 20 cm from all persons.
variousClass II permissive change to show compliance with New U-NII-3 sub band rule per FCC ET docket No. 13-49. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Operations in 5.15-5.25 GHz and 5.47-5.725 GHz bands are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation.
variousClass II permissive change to add KDB 616217 SAR modular approval for 5mm separation distance with the antenna and reduced power settings as described in this filing. Installation is limited to tablets where the antenna to enclosure distance is at least 10mm and in the display or keyboard section of laptops/notebooks/netbooks where the antenna-to-user distance is at least 5mm. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Operations in 5.15-5.25 GHz band is for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest reported SAR values for body-worn and simultaneous transmission exposure conditions are 0.78 W/Kg and 0.90 W/Kg.
variousClass II permissive change to add KDB 616217 SAR modular approval for 5mm separation distance with the antenna and reduced power settings as described in this filing. Installation is limited to tablets where the antenna to enclosure distance is at least 10mm and in the display or keyboard section of laptops/notebooks/netbooks where the antenna-to-user distance is at least 5mm. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest reported SAR values for body-worn and simultaneous transmission exposure conditions are 0.78 W/Kg and 0.90 W/Kg.
variousClass II permissive change to add KDB 616217 SAR modular approval for 5mm separation distance with the antenna and reduced power settings as described in this filing. Installation is limited to tablets where the antenna to enclosure distance is at least 10mm and in the display or keyboard section of laptops/notebooks/netbooks where the antenna-to-user distance is at least 5mm. Output power is conducted.
variousClass II permissive change to add portable use condition and antenna in specific host tablet as described in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Operations in 5.15-5.25 GHz band is for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest reported SAR value is 0.77 W/Kg.
variousClass II permissive change to add portable use condition and antenna in specific host tablet as described in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest reported SAR value is 1.39 W/Kg.
variousClass II permissive change to add portable use condition and antenna in specific host tablet as described in this filing. Output power is conducted.
variousClass II permissive change to allow installation into Lenovo Miix 211 Tablet PC with the antennas and configuration described in this filing. Power reduction is needed in this host for portable category configuration. Output power listed is conducted. Operations in 5.15-5.25 GHz and 5.47-5.725 GHz bands are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2 cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3 cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest reported SAR is 1.46W/kg.
variousClass II permissive change to allow installation into Lenovo Miix 211 Tablet PC with the antennas and configuration described in this filing. Output power listed is conducted.
variousClass II permissive change to allow installation into the Lenovo Series of Notebooks (20267xxxxxx, 80B0xxxxxx, IdeaPad U330pxxxxxx) with the antennas and reduced output power documented in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Operations in 5.15-5.25 GHz band is for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna (s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest stand-alone modular SAR with separations described above is 0.35 W/Kg. The highest reported SAR value across all filings under this FCC ID is 1.53 W/kg. The highest reported SAR value under this filing is 0.88 W/Kg.
variousClass II permissive change to allow installation into the Lenovo Series of Notebooks (20267xxxxxx, 80B0xxxxxx, IdeaPad U330pxxxxxx) with the antennas and reduced output power documented in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest standalone modular SAR with separations described above is 0.16W/Kg. The highest reported SAR value across all filings under this FCC ID is 1.13 W/kg. The highest reported SAR value under this filing is 0.62 W/Kg.
variousClass II permissive change to allow installation into the Lenovo Series of Notebooks (20267xxxxxx, 80B0xxxxxx, IdeaPad U330pxxxxxx) with the antennas and configuration described in this filing. Output power listed is conducted.
variousOutput power is conducted. This module may only be installed by the OEM or an OEM integrator. Operations in 5.15-5.25 GHz and 5.47-5.725 GHz bands are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2 cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3 cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest stand-alone modular SAR with separations described above is 0.35 W/kg. (Original Grant Notes 02/03/2012) This Class II permissive change is to establish the most conservative antenna-to-user separation distance of 9.8 mm for portable configurations. The antenna(s) used for this device must be installed to provide a separation distance of at least 9.8 mm from all persons and the separation distance between the main and auxiliary antennas shall be at least 5.6 cm when positioned horizontally. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to KDB 616217 D04. Separate approval is required for all other operating configurations, including different antenna configurations. The highest reported SAR value for stand-alone and simultaneous transmission conditions are 0.69W/kg and 0.76W/kg, respectively.
variousOutput power is conducted. This module may only be installed by the OEM or an OEM integrator. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest reported SAR value is 0.16W/Kg. (Original Grant Notes 02/03/2012) This Class II permissive change is to establish the most conservative antenna-to-user separation distance of 9.8 mm for portable configurations. The antenna(s) used for this device must be installed to provide a separation distance of at least 9.8 mm from all persons and the separation distance between the main and auxiliary antennas shall be at least 5.6 cm when positioned horizontally. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to KDB 616217 D04. Separate approval is required for all other operating configurations, including different antenna configurations. The highest reported SAR value for stand-alone and simultaneous transmission conditions are 0.72W/kg and 0.79W/kg, respectively.
variousOutput power is conducted. (Original Grant Notes 02/03/2012) This Class II permissive change is to establish the most conservative antenna-to-user separation distance of 9.8 mm for portable configurations. The antenna(s) used for this device must be installed to provide a separation distance of at least 9.8 mm from all persons and the separation distance between the main and auxiliary antennas shall be at least 5.6 cm when positioned horizontally. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to KDB 616217 D04. Separate approval is required for all other operating configurations, including different antenna configurations.
variousClass II permissive change to add dipole antenna type that described in this filing. The dipole antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest stand-alone modular SAR of antenna with separations described above is 0.16W/Kg.
variousClass II permissive change to add dipole antenna type that described in this filing. Output power is conducted.
variousClass II permissive change to add dipole antenna type that described in this filing. The dipole antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Operations in 5.15-5.25 GHz band is for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest stand-alone modular SAR of antenna with separations described above is 0.35 W/Kg.
variousClass II permissive change to add the specific portable laptop PC configuration with antenna and reduce output power per manufactory level as documented in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest stand-alone modular SAR with separations described above is 0.16W/Kg. The highest reported SAR value across all filings under this FCC ID is 1.13 W/kg. The highest reported SAR value under this filing is 0.61 W/Kg.
variousClass II permissive change to add the specific portable laptop PC configuration with antenna and configuration described in this filing. Output power listed is conducted.
variousClass II permissive change to add the specific portable laptop PC configuration with antenna and reduce output power per manufactory level as documented in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Operations in 5.15-5.25 GHz band is for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest stand-alone modular SAR with separations described above is 0.35 W/Kg. The highest reported SAR value across all filings under this FCC ID is 1.53 W/kg. The highest reported SAR value under this filing is 0.38 W/Kg.
variousClass II permissive change to add the specific portable tablet configuration with antenna and configuration described in this filing. Output power listed is conducted.
variousClass II permissive change to add the specific portable laptop PC configuration with antenna and reduce output power per manufactory level as documented in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Operations in 5.15-5.25 GHz band is for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest stand-alone modular SAR with separations described above is 0.35 W/Kg. The highest reported SAR value across all filings under this FCC ID is 1.53 W/kg. The highest reported SAR value under this filing is 0.69 W/Kg.
variousClass II permissive change to add the specific portable laptop PC configuration with antenna and reduce output power per manufactory level as documented in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest stand-alone modular SAR with separations described above is 0.16W/Kg. The highest reported SAR value across all filings under this FCC ID is 1.13 W/kg. The highest reported SAR value under this filing is 0.27 W/Kg.
variousClass II permissive change to add the specific portable laptop PC with antenna and configuration described in this filing. Output power listed is conducted.
variousClass II permissive change to add the specific portable laptop PC configuration with antenna and reduce output power per manufactory level as documented in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest stand-alone modular SAR with separations described above is 0.16W/Kg. The highest reported SAR value across all filings under this FCC ID is 1.13 W/kg. The highest reported SAR value under this filing is 0.31 W/Kg.
variousClass II permissive change to add the specific portable laptop PC configuration with antenna and reduce output power per manufactory level as documented in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest stand-alone modular SAR with separations described above is 0.16W/Kg. The highest reported SAR value across all filings under this FCC ID is 1.13 W/kg. The highest reported SAR value under this filing is 0.25 W/Kg.
variousClass II permissive change to add the specific portable laptop PC configuration with antenna and reduce output power per manufactory level as documented in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Operations in 5.15-5.25 GHz band is for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest stand-alone modular SAR with separations described above is 0.35 W/Kg. The highest reported SAR value across all filings under this FCC ID is 1.53 W/kg. The highest reported SAR value under this filing is 0.61 W/Kg.
variousClass II permissive change to add the specific portable tablet PC configuration with antenna and configuration described in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest stand-alone modular SAR with separations described above is 0.16W/Kg. The highest reported SAR value across all filings under this FCC ID is 1.13 W/kg. The highest reported SAR value under this filing is 0.35 W/Kg.
variousClass II permissive change to add the specific portable tablet PC configuration with antenna and configuration described in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Operations in 5.15-5.25 GHz band is for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest stand-alone modular SAR with separations described above is 0.35 W/Kg. The highest reported SAR value across all filings under this FCC ID is 1.53 W/kg. The highest reported SAR value under this filing is 0.32 W/Kg.
variousClass II permissive change to add the specific portable tablet PC configuration with antenna and configuration described in this filing. Output power is conducted.
variousClass II permissive change to add the specific portable tablet PC configuration with antenna and configuration described in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest stand-alone modular SAR with separations described above is 0.16W/Kg. The highest reported SAR value across all filings under this FCC ID is 1.13 W/kg. The highest reported SAR value under this filing is 0.72 W/Kg.
variousClass II permissive change to add the specific portable tablet PC configuration with antenna and configuration described in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Operations in 5.15-5.25 GHz band is for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest stand-alone modular SAR with separations described above is 0.35 W/Kg. The highest reported SAR value across all filings under this FCC ID is 1.53 W/kg. The highest reported SAR value under this filing is 1.34 W/Kg.
variousPower listed is conducted. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
variousClass II Permissive Change to add specific portable host configuration. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Operations in 5.15-5.25 GHz and 5.47-5.725 GHz bands are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically unless additional SAR evaluation is performed to allow use at with smaller separation. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 documentation. The highest reported SAR value across all filings under this FCC ID is 1.53 W/kg. The highest reported SAR value for this filing is 1.42 W/Kg.
variousClass II Permissive Change to add specific portable host configuration. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically unless additional SAR evaluation is performed to allow use at with smaller separation. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 documentation. The highest reported SAR value across all filings under this FCC ID is 1.13 W/kg. The highest reported SAR value for this filing is 0.90 W/Kg.
variousClass II permissive change to add the specific portable tablet PC configuration with antenna and configuration described in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest stand-alone modular SAR with separations described above is 0.16W/Kg. The highest reported SAR value across all filings under this FCC ID is 1.13 W/kg. The highest reported SAR value under this filing is 1.04 W/Kg.
variousClass II permissive change to add the specific portable tablet PC configuration with antenna and configuration described in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Operations in 5.15-5.25 GHz and 5.47-5.725 GHz bands are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest stand-alone modular SAR with separations described above is 0.35 W/Kg. The highest reported SAR value across all filings under this FCC ID is 1.53 W/kg. The highest reported SAR value under this filing is 1.48 W/Kg.
variousClass II permissive change to change BoM of passive matching components that described in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest stand-alone modular SAR with separations described above is 0.16W/Kg.
variousClass II permissive change to change BoM of passive matching components that described in this filing. Output power is conducted.
variousClass II permissive change to change BoM of passive matching components that described in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Operations in 5.15-5.25 GHz and 5.47-5.725 GHz bands are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest stand-alone modular SAR with separations described above is 0.35 W/Kg.
variousClass II permissive change to add the metal shielding at module that described in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Operations in 5.15-5.25 GHz and 5.47-5.725 GHz bands are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest stand-alone modular SAR with separations described above is 0.35 W/Kg.
variousClass II permissive change to add the metal shielding at module that described in this filing. Output power is conducted.
variousClass II permissive change to add the metal shielding at module that described in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest stand-alone modular SAR with separations described above is 0.16W/Kg.
variousClass II permissive change to add the specific portable notebook/laptop configuration with antenna and configuration described in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest stand-alone modular SAR with separations described above is 0.16W/Kg. The highest reported SAR value across all filings under this FCC ID is 1.13 W/kg. The highest reported SAR value under this filing is 0.40 W/Kg.
variousClass II permissive change to add the specific portable notebook/laptop configuration with antenna and configuration described in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Operations in 5.15-5.25 GHz and 5.47-5.725 GHz bands are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest stand-alone modular SAR with separations described above is 0.35 W/Kg. The highest reported SAR value across all filings under this FCC ID is 1.53 W/kg. The highest reported SAR value under this filing is 0.70 W/Kg.
variousClass II permissive change to add the specific portable notebook/laptop configuration with antenna and configuration described in this filing. Output power is conducted.
variousClass II permissive change to add the specific portable notebook/laptop configuration with antenna and configuration described in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Operations in 5.15-5.25 GHz and 5.47-5.725 GHz bands are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest stand-alone modular SAR with separations described above is 0.35 W/Kg. The highest reported SAR value across all filings under this FCC ID is 1.53 W/kg. The highest reported SAR value under this filing is 1.00 W/Kg.
variousClass II permissive change to add the specific portable notebook/laptop configuration with antenna and configuration described in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest stand-alone modular SAR with separations described above is 0.16W/Kg. The highest reported SAR value across all filings under this FCC ID is 1.13 W/kg. The highest reported SAR value under this filing is 0.46 W/Kg.
variousClass II permissive change to add the specific portable notebook/laptop configuration with antenna and configuration described in this filing. Output power is conducted.
variousClass II permissive change to add portable use condition in specific host laptop/tablet as described in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Operations in 5.15-5.25 GHz and 5.47-5.725 GHz bands are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. For Modular Approvals the antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest reported SAR value is 1.37 W/Kg. The highest measured SAR value across all filings under this FCC ID is 1.53 W/Kg.
variousClass II permissive change to add portable use condition in specific host laptop/tablet as described in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. For Modular Approvals the antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest reported SAR value is 0.13 W/Kg. The highest measured SAR value across all filings under this FCC ID is 1.45 W/Kg.
variousClass II Permissive Change. Output power is conducted.
variousClass II permissive change. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Operations in 5.15-5.25 GHz and 5.47-5.725 GHz bands are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2 cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3 cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest stand-alone modular SAR with separations described above is 0.35 W/kg. The highest measured SAR value across all filings for other configurations under this FCC ID is 1.53 W/Kg.
variousClass II Permissive Change. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2 cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3 cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest stand-alone modular SAR with separations described above is 0.16 W/kg. The highest reported SAR value across all filings for other configurations under this FCCID is 1.45 W/Kg.
variousC2PC for portable Host , Pegatron GT101C Output power is conducted.
variousC2PC for portable Host , Pegatron GT101C Highest reported SAR is 0.27 W/kg Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest reported SAR value is 0.16W/Kg.
variousC2PC for portable Host , Pegatron GT101C Highest reported SAR is 0.72 W/kg Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Operations in 5.15-5.25 GHz and 5.47-5.725 GHz bands are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest reported SAR value is 0.35W/Kg.
variousC2PC for portable Host , Acer Aspire M3 series (M3-581T , M3-581TG) Output power is conducted..
variousC2PC for portable Host , Acer Aspire M3 series (M3-581T , M3-581TG) Highest reported SAR is 1.08 W/kg Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Operations in 5.15-5.25 GHz and 5.47-5.725 GHz bands are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest reported SAR value is 0.35W/Kg.
variousC2PC for portable Host , Acer Aspire M3 series (M3-581T , M3-581TG) Highest reported SAR is 1.13 W/kg Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest reported SAR value is 0.16W/Kg.
variousClass II permissive change to add portable use condition in specific host laptop as described in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Operations in 5.15-5.25 GHz and 5.47-5.725 GHz bands are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest reported SAR value is 0.6 W/Kg. The highest measured SAR value across all filings under this FCC ID is 1.53 W/Kg.
variousClass II permissive change to add portable use condition in specific host laptop as described in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest reported SAR value is 0.12 W/Kg. The highest measured SAR value across all filings under this FCC ID is 1.45 W/Kg.
variousClass II permissive change to add portable use condition in specific host laptop as described in this filing. Output power is conducted.
variousClass II permissive change filing to add LNA to RX chains as documented in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Operations in 5.15-5.25 GHz and 5.47-5.725 GHz bands are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest measured SAR value across all filings under this FCC ID is 1.53W/Kg.
variousClass II permissive change filing to add LNA to RX chains as documented in this filing. Output power is conducted.
variousClass II permissive change filing to add LNA to RX chains as documented in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest measured SAR value across all filings under this FCC ID is 1.45W/Kg.
variousClass II permissive change to add portable use condition in specific host PC as described in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Operations in 5.15-5.25 GHz and 5.47-5.725 GHz bands are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest reported SAR value is 1.53W/Kg. The highest measured SAR value across all filings under this FCC ID is 1.53W/Kg.
variousClass II permissive change to add portable use condition in specific host PC as described in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest reported SAR value is 1.45W/Kg. The highest measured SAR value across all filings under this FCC ID is 1.45W/Kg.
variousClass II permissive change to add portable use condition in specific host PC as described in this filing. Output power listed is conducted.
variousClass II permissive change to add the specific portable notebook host documented in this filing. Power listed is conducted. This module may be installed only by the OEM or an OEM integrator. Compliance of this device in all final product configurations is the responsibility of the Grantee. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. Only antenna(s) documented under this FCC ID number may be used with this transmitter. OEM/Host integrator is responsible for complying with the instructions and requirements for each individual transmitter they choose to incorporate into a host product. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The highest measured under this filing is 0.71 W/kg. The highest measured SAR value across all filings under this FCC ID is 0.71W/Kg.
variousClass II Permissive Change to add the specific portable notebook host described in this filing. This device is a Client Device without Radar detection. Power listed is conducted. This module may only be installed by the OEM or an OEM integrator. Compliance of this device in all final product configurations is the responsibility of the Grantee. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. Only antenna(s) documented under this FCC ID number may be used with this transmitter. OEM/Host integrator is responsible for complying with the instructions and requirements for each individual transmitter they choose to incorporate into a host product. Operations in 5.15-5.25 GHz and 5.47-5.725 GHz bands are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The highest measured SAR under this filing is 1.17 W/kg. The highest measured SAR value across all filings under this FCC ID is 1.17W/Kg.
variousClass II permissive change to add the specific portable notebook host described in this filing. Power listed is conducted. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
variousClass II permissive change to add portable use condition in specific host laptop as described in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest reported SAR value is 0.42W/Kg. The highest measured SAR value across all filings under this FCC ID is 0.42W/Kg.
variousClass II permissive change to add portable use condition in specific host laptop as described in this filing. Output power listed is conducted.
variousClass II permissive change to add portable use condition in specific host laptop as described in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Operations in 5.15-5.25 GHz and 5.47-5.725 GHz bands are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure ompliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest reported SAR value is 0.71W/Kg. The highest measured SAR value across all filings under this FCC ID is 1.17W/Kg.
variousClass II permissive change to add portable use condition in specific host laptop as described in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest reported SAR value is 0.23W/Kg. The highest measured SAR value across all filings under this FCC ID is 0.23W/Kg.
variousClass II permissive change to add portable use condition in specific host laptop as described in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Operations in 5.15-5.25 GHz and 5.47-5.725 GHz bands are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest reported SAR value is 1.17W/Kg. The highest measured SAR value across all filings under this FCC ID is 1.17W/Kg.
variousClass II Permissive Change to add specific portable notebook configuration. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. SAR compliance for specific-host portable use conditions has been evaluated as described in this permissive change filing; the highest reported SAR values is 0.37 W/kg.
variousClass II Permissive Change to add specific portable notebook configuration. This device is a Client Device without Radar detection. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Operations in 5.15-5.25 GHz and 5.47-5.725 GHz bands are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. SAR compliance for specific-host portable use conditions has been evaluated as described in this permissive change filing; the highest reported SAR values is 1.01 W/kg.
variousClass II Permissive Change to add specific portable notebook configuration. Output power is conducted.
variousOutput power is conducted.
variousOutput power is conducted. This module may only be installed by the OEM or an OEM integrator. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest reported SAR value is 0.16W/Kg.
variousOutput power is conducted. This module may only be installed by the OEM or an OEM integrator. Operations in 5.15-5.25 GHz and 5.47-5.725 GHz bands are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest reported SAR value is 0.35W/Kg.
variousIs there an equipment authorization waiver associated with this application?No
variousIf there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
various Firm Name Bureau Veritas CPS(H.K.) Ltd., Taoyuan Branch
various Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch
various Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch
various Sporton International Inc.
various Compliance Certification Services Inc.
various Bay Area Compliance Laboratories Corp. (Dongguan)
various A Test Lab Techno Corp.
various Sporton International Inc
various SPORTON International Inc.
various DEKRA Testing and Certification Co., Ltd.
various SGS TAIWAN LTD.
various Compliance Certification Services (UL CCS)
various Name E**** L******
various K******** L******
various R**** C********
various A******** C****
various H**** L********
various J****** C********
various J**** L****
various S****** H********
various N****** B****
various B******** J****
various K**** L********
various Telephone Number +886-********
various +886-******** Extension:
various 886-3******** Extension:
various 886-3******** Extension:
various 886-2******** Extension:
various 86-76******** Extension:
various 886-3********
various 886-2******** Extension:
various 886-2******** Extension:
various 88633******** Extension:
various 886-2******** Extension:
various +886-******** Extension:
various 510-7********
various Fax Number +886-********
various +886-********
various 886 3********
various 886-3********
various 886-3********
various 886-2********
various 886-3********
various 886-2********
various 886-2********
various 886-2********
various 88632********
various 886-2********
various +886-********
various 510-6********
various E-mail e******@tw.bureauveritas.com
various k******@tw.bureauveritas.com
various r******@tw.bureauveritas.com
various a******@sporton.com.tw
various h******@sgs.com
various j******@baclcorp.com
various J******@atl-lab.com.tw
various s******@quietek.com
various n******@sgs.com
various b******@ccsemc.com
various k******@sporton.com.tw
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 15C CC 2402.00000000 2480.00000000 0.0050000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 15E 38 CC MO 5180 5240 0.03
2 2 15E 38 CC MO 5190 5230 0.045
2 3 15E 38 CC MO ND 5260 5320 0.1
2 4 15E 38 CC MO ND 5270 5310 0.063
2 5 15E 38 CC MO ND 5500 5700 0.072
2 6 15E 38 CC MO ND 5510 5670 0.063
2 7 15E 38 CC MO 5745 5825 0.037
2 8 15E 38 CC MO 5755 5795 0.053
2 9 15E 38 CC MO 5775 5775 0.052
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 15E 38 CC MO 5180 5240 0.03
3 2 15E 38 CC MO 5190 5230 0.045
3 3 15E 38 CC MO ND 5260 5320 0.1
3 4 15E 38 CC MO ND 5270 5310 0.063
3 5 15E 38 CC MO ND 5500 5700 0.072
3 6 15E 38 CC MO ND 5510 5670 0.063
3 7 15E 38 CC MO 5745 5825 0.037
3 8 15E 38 CC MO 5755 5795 0.053
3 9 15E 38 CC MO 5775 5775 0.052
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
4 1 15C CC MO 2402 2480 0.003
4 2 15C CC MO 2412 2462 0.479
4 3 15C CC MO 2422 2452 0.311
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
5 1 15C CC MO 2402 2480 0.003
5 2 15C CC MO 2412 2462 0.479
5 3 15C CC MO 2422 2452 0.311
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
6 1 15C CC 2402.00000000 2480.00000000 0.0050000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
7 1 15E 38 CC MO 5180 5240 0.03
7 2 15E 38 CC MO 5190 5230 0.045
7 3 15E 38 CC MO ND 5260 5320 0.1
7 4 15E 38 CC MO ND 5270 5310 0.063
7 5 15E 38 CC MO ND 5500 5700 0.072
7 6 15E 38 CC MO ND 5510 5670 0.063
7 7 15E 38 CC MO 5745 5825 0.037
7 8 15E 38 CC MO 5755 5795 0.053
7 9 15E 36 CC MO 5775 5775 0.052
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
8 1 15E CC MO 5180 5240 0.03
8 2 15E CC MO 5190 5230 0.045
8 3 15E CC MO ND 5260 5320 0.1
8 4 15E CC MO ND 5270 5310 0.063
8 5 15E CC MO ND 5500 5700 0.072
8 6 15E CC MO ND 5510 5670 0.063
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
9 1 15C CC 2402 2480 0.003
9 2 15C CC MO 2412 2462 0.479
9 3 15C CC MO 2422 2452 0.311
9 4 15C CC MO 5745 5825 0.218
9 5 15C CC MO 5755 5795 0.214
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
10 1 15C CC 2402.00000000 2480.00000000 0.0050000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
11 1 15E CC MO 5180 5240 0.03
11 2 15E CC MO 5190 5230 0.045
11 3 15E CC MO ND 5260 5320 0.1
11 4 15E CC MO ND 5270 5310 0.063
11 5 15E CC MO ND 5500 5700 0.072
11 6 15E CC MO ND 5510 5670 0.063
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
12 1 15C CC 2402 2480 0.003
12 2 15C CC MO 2412 2462 0.479
12 3 15C CC MO 2422 2452 0.311
12 4 15C CC MO 5745 5825 0.218
12 5 15C CC MO 5755 5795 0.214
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
13 1 15C CC 2402.00000000 2480.00000000 0.0050000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
14 1 15E 36 CC MO 5180 5240 0.03
14 2 15E 36 CC MO 5190 5230 0.045
14 3 15E 36 CC MO 5260 5320 0.1
14 4 15E 36 CC MO 5270 5310 0.063
14 5 15E 36 CC MO 5500 5700 0.072
14 6 15E 36 CC MO 5510 5670 0.063
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
15 1 15C CC 2402 2480 0.003
15 2 15C 36 CC MO 2412 2462 0.479
15 3 15C 36 CC MO 2422 2452 0.311
15 4 15C 36 CC MO 5745 5825 0.218
15 5 15C 36 CC MO 5755 5795 0.214
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
16 1 15C CC 2402.00000000 2480.00000000 0.0050000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
17 1 15E 36 CC 5180 5240 0.03
17 2 15E 36 CC MO 5190 5230 0.045
17 3 15E 36 CC 5260 5320 0.1
17 4 15E 36 CC MO 5270 5310 0.063
17 5 15E 36 CC 5500 5700 0.072
17 6 15E 36 CC MO 5510 5670 0.063
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
18 1 15C CC 2402 2480 0.003
18 2 15C 36 CC MO 2412 2462 0.479
18 3 15C 36 CC MO 2422 2452 0.311
18 4 15C 36 CC MO 5745 5825 0.218
18 5 15C 36 CC MO 5755 5795 0.214
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
19 1 15C CC 2402.00000000 2480.00000000 0.0050000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
20 1 15E CC MO 5180 5240 0.03
20 2 15E CC MO 5190 5230 0.045
20 3 15E CC MO ND 5260 5320 0.1
20 4 15E CC MO ND 5270 5310 0.063
20 5 15E CC MO ND 5500 5700 0.072
20 6 15E CC MO ND 5510 5670 0.063
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
21 1 15C CC 2402 2480 0.003
21 2 15C CC MO 2412 2462 0.479
21 3 15C CC MO 2422 2452 0.311
21 4 15C CC MO 5745 5825 0.218
21 5 15C CC MO 5755 5795 0.214
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
22 1 15C CC 2402.00000000 2480.00000000 0.0050000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
23 1 15C CC 2402 2480 0.003
23 2 15C CC MO 2412 2462 0.479
23 3 15C CC MO 2422 2452 0.311
23 4 15C CC MO 5745 5825 0.218
23 5 15C CC MO 5755 5795 0.214
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
24 1 15C CC 2402.00000000 2480.00000000 0.0050000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
25 1 15E CC MO 5180 5240 0.03
25 2 15E CC MO 5190 5230 0.045
25 3 15E CC MO ND 5260 5320 0.1
25 4 15E CC MO ND 5270 5310 0.063
25 5 15E CC MO ND 5500 5700 0.072
25 6 15E CC MO ND 5510 5670 0.063
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
26 1 15C CC 2402 2480 0.003
26 2 15C 36 CC MO 2412 2462 0.479
26 3 15C 36 CC MO 2422 2452 0.311
26 4 15C 36 CC MO 5745 5825 0.218
26 5 15C 36 CC M4 5755 5795 0.214
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
27 1 15C CC 2402.00000000 2480.00000000 0.0050000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
28 1 15E 36 CC MO 5180 5240 0.03
28 2 15E 36 CC MO 5190 5230 0.045
28 3 15E 36 CC MO ND 5260 5320 0.1
28 4 15E 36 CC MO 5270 5310 0.063
28 5 15E 36 CC MO ND 5500 5700 0.072
28 6 15E 36 CC MO ND 5510 5670 0.063
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
29 1 15C CC 2402.00000000 2480.00000000 0.0050000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
30 1 15E 36 CC MO 5180 5240 0.03
30 2 15E 36 CC MO 5190 5230 0.045
30 3 15E 36 CC MO ND 5260 5320 0.1
30 4 15E 36 CC MO ND 5270 5310 0.063
30 5 15E 36 CC MO ND 5500 5700 0.072
30 6 15E 36 CC MO ND 5510 5670 0.063
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
31 1 15C CC 2402 2480 0.003
31 2 15C 36 CC MO 2412 2462 0.479
31 3 15C 36 CC MO 2422 2452 0.311
31 4 15C 36 CC MO 5745 5825 0.218
31 5 15C 36 CC MO 5755 5795 0.214
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
32 1 15E 36 CC MO 5180 5240 0.03
32 2 15E 36 CC MO 5190 5230 0.045
32 3 15E 36 CC MO ND 5260 5320 0.1
32 4 15E 36 CC MO ND 5270 5310 0.063
32 5 15E 36 CC MO ND 5500 5700 0.072
32 6 15E 36 CC MO ND 5510 5670 0.063
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
33 1 15C CC 2402.00000000 2480.00000000 0.0050000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
34 1 15C CC 2402 2480 0.003
34 2 15C 36 CC MO 2412 2462 0.479
34 3 15C 36 CC MO 2422 2452 0.311
34 4 15C 36 CC MO 5745 5825 0.218
34 5 15C 36 CC MO 5755 5795 0.214
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
35 1 15C CC 2402 2480 0.003
35 2 15C 36 CC MO 2412 2462 0.479
35 3 15C 36 CC MO 2422 2452 0.311
35 4 15C 36 CC MO 5745 5825 0.218
35 5 15C 36 CC MO 5755 5795 0.214
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
36 1 15C CC 2402.00000000 2480.00000000 0.0050000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
37 1 15E 36 CC MO 5180 5240 0.03
37 2 15E 36 CC MO 5190 5230 0.045
37 3 15E 36 CC MO ND 5260 5320 0.1
37 4 15E 36 CC MO ND 5270 5310 0.063
37 5 15E 36 CC MO ND 5500 5700 0.072
37 6 15E 36 CC MO ND 5510 5670 0.063
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
38 1 15C CC 2402 2480 0.003
38 2 15C CC MO 2412 2462 0.479
38 3 15C CC MO 2422 2452 0.311
38 4 15C CC MO 5745 5825 0.218
38 5 15C CC MO 5755 5795 0.214
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
39 1 15E CC MO 5180 5240 0.03
39 2 15E CC MO 5190 5230 0.045
39 3 15E CC MO ND 5260 5320 0.1
39 4 15E CC MO ND 5270 5310 0.063
39 5 15E CC MO ND 5500 5700 0.072
39 6 15E CC MO ND 5510 5670 0.063
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
40 1 15C CC 2402.00000000 2480.00000000 0.0050000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
41 1 15C CC 2402.00000000 2480.00000000 0.0050000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
42 1 15C CC 2402 2480 0.003
42 2 15C CC MO 2412 2462 0.479
42 3 15C CC MO 2422 2452 0.311
42 4 15C CC MO 5745 5825 0.218
42 5 15C CC MO 5755 5795 0.214
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
43 1 15E CC MO 5180 5240 0.03
43 2 15E CC MO 5190 5230 0.045
43 3 15E CC MO ND 5260 5320 0.1
43 4 15E CC MO ND 5270 5310 0.063
43 5 15E CC MO ND 5500 5700 0.072
43 6 15E CC MO ND 5510 5670 0.063
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
44 1 15C CC 2402.00000000 2480.00000000 0.0050000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
45 1 15E CC MO 5180 5240 0.03
45 2 15E CC MO 5190 5230 0.045
45 3 15E CC MO ND 5260 5320 0.1
45 4 15E CC MO ND 5270 5310 0.063
45 5 15E CC MO ND 5500 5700 0.072
45 6 15E CC MO ND 5510 5670 0.063
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
46 1 15C CC MO 2412 2462 0.479
46 2 15C CC MO 2422 2452 0.311
46 3 15C CC MO 5745 5825 0.218
46 4 15C CC MO 5755 5795 0.214
46 5 15C CC 2402 2480 0.003
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
47 1 15C CC 2402 2480 0.003
47 2 15C CC MO 2412 2462 0.479
47 3 15C CC MO 2422 2452 0.311
47 4 15C CC MO 5745 5825 0.218
47 5 15C CC MO 5755 5795 0.214
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
48 1 15C CC 2402.00000000 2480.00000000 0.0050000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
49 1 15E CC MO 5180 5240 0.03
49 2 15E CC MO 5190 5230 0.045
49 3 15E CC MO ND 5260 5320 0.1
49 4 15E CC MO ND 5270 5310 0.063
49 5 15E CC MO ND 5500 5700 0.072
49 6 15E CC MO ND 5510 5670 0.063
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
50 1 15C CC 2402 2480 0.003
50 2 15C CC MO 2412 2462 0.479
50 3 15C CC MO 2422 2452 0.311
50 4 15C CC MO 5745 5825 0.218
50 5 15C CC MO 5755 5795 0.214
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
51 1 15C CC 2402.00000000 2480.00000000 0.0050000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
52 1 15E CC MO 5180 5240 0.03
52 2 15E CC MO 5190 5230 0.045
52 3 15E CC MO ND 5260 5320 0.1
52 4 15E CC MO ND 5270 5310 0.063
52 5 15E CC MO ND 5500 5700 0.072
52 6 15E CC MO ND 5510 5670 0.063
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
53 1 15E CC MO 5180 5240 0.03
53 2 15E CC MO 5190 5230 0.045
53 3 15E CC MO ND 5260 5320 0.1
53 4 15E CC MO ND 5270 5310 0.063
53 5 15E CC MO ND 5500 5700 0.072
53 6 15E CC MO ND 5510 5670 0.063
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
54 1 15C CC 2402.00000000 2480.00000000 0.0050000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
55 1 15C CC 2402 2480 0.003
55 2 15C CC MO 2412 2462 0.479
55 3 15C CC MO 2422 2452 0.311
55 4 15C CC MO 5745 5825 0.218
55 5 15C CC MO 5755 5795 0.214
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
56 1 15C CC 2402 2480 0.003
56 2 15C CC MO 2412 2462 0.479
56 3 15C CC MO 2422 2452 0.311
56 4 15C CC MO 5745 5825 0.218
56 5 15C CC MO 5755 5795 0.214
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
57 1 15E CC MO 5180 5240 0.03
57 2 15E CC MO 5190 5230 0.045
57 3 15E CC MO ND 5260 5320 0.1
57 4 15E CC MO ND 5270 5310 0.063
57 5 15E CC MO ND 5500 5700 0.072
57 6 15E CC MO ND 5510 5670 0.063
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
58 1 15C CC 2402.00000000 2480.00000000 0.0050000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
59 1 15E CC MO 5180 5240 0.03
59 2 15E CC MO 5190 5230 0.045
59 3 15E CC MO ND 5260 5320 0.1
59 4 15E CC MO ND 5270 5310 0.063
59 5 15E CC MO ND 5500 5700 0.072
59 6 15E CC MO ND 5510 5670 0.063
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
60 1 15C CC 2402 2480 0.003
60 2 15C CC MO 2412 2462 0.479
60 3 15C CC MO 2422 2452 0.311
60 4 15C CC MO 5745 5825 0.218
60 5 15C CC MO 5755 5795 0.214
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
61 1 15C CC 2402.00000000 2480.00000000 0.0050000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
62 1 15E CC MO 5180 5240 0.03
62 2 15E CC MO 5190 5230 0.045
62 3 15E CC MO ND 5260 5320 0.1
62 4 15E CC MO ND 5270 5310 0.063
62 5 15E CC MO ND 5500 5700 0.072
62 6 15E CC MO ND 5510 5670 0.063
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
63 1 15C CC 2402 2480 0.003
63 2 15C CC MO 2412 2462 0.479
63 3 15C CC MO 2422 2452 0.311
63 4 15C CC MO 5745 5825 0.218
63 5 15C CC MO 5755 5795 0.214
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
64 1 15C CC 2402.00000000 2480.00000000 0.0050000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
65 1 15E CC MO ND 5180 5240 0.03
65 2 15E CC MO ND 5190 5230 0.045
65 3 15E CC MO ND 5260 5320 0.1
65 4 15E CC MO ND 5270 5310 0.063
65 5 15E CC MO ND 5500 5700 0.072
65 6 15E CC MO ND 5510 5670 0.063
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
66 1 15C CC 2402 2480 0.003
66 2 15C CC MO 2412 2462 0.479
66 3 15C CC MO 2422 2452 0.311
66 4 15C CC MO 5745 5825 0.218
66 5 15C CC MO 5755 5795 0.214
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
67 1 15C CC 2402.00000000 2480.00000000 0.0050000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
68 1 15C CC 2402 2480 0.003
68 2 15C CC MO 2412 2462 0.479
68 3 15C CC MO 2422 2452 0.311
68 4 15C CC MO 5745 5825 0.218
68 5 15C CC MO 5755 5795 0.214
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
69 1 15E CC MO 5180 5240 0.03
69 2 15E CC MO 5190 5230 0.045
69 3 15E CC MO ND 5260 5320 0.1
69 4 15E CC MO ND 5270 5310 0.063
69 5 15E CC MO ND 5500 5700 0.072
69 6 15E CC MO ND 5510 5670 0.063
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
70 1 15C CC 2402.00000000 2480.00000000 0.0050000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
71 1 15E CC MO 5180 5240 0.03
71 2 15E CC MO 5190 5230 0.045
71 3 15E CC MO ND 5260 5320 0.1
71 4 15E CC MO ND 5270 5310 0.063
71 5 15E CC MO ND 5500 5700 0.072
71 6 15E CC MO ND 5510 5670 0.063
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
72 1 15C CC 2402 2480 0.003
72 2 15C CC MO 2412 2462 0.479
72 3 15C CC MO 2422 2452 0.311
72 4 15C CC MO 5745 5825 0.218
72 5 15C CC MO 5755 5795 0.214
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
73 1 15E CC MO 5180 5240 0.03
73 2 15E CC MO 5190 5230 0.045
73 3 15E CC MO ND 5260 5320 0.1
73 4 15E CC MO ND 5270 5310 0.063
73 5 15E CC MO ND 5500 5700 0.072
73 6 15E CC MO ND 5510 5670 0.063
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
74 1 15C CC 2402 2480 0.003
74 2 15C CC MO 2412 2462 0.479
74 3 15C CC MO 2422 2452 0.311
74 4 15C CC MO 5745 5825 0.218
74 5 15C CC MO 5755 5795 0.214
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
75 1 15C CC 2402.00000000 2480.00000000 0.0050000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
76 1 15E CC MO 5180 5240 0.03
76 2 15E CC MO 5190 5230 0.045
76 3 15E CC MO ND 5260 5320 0.1
76 4 15E CC MO ND 5270 5310 0.063
76 5 15E CC MO ND 5500 5700 0.072
76 6 15E CC MO ND 5510 5670 0.063
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
77 1 15C CC 2402.00000000 2480.00000000 0.0050000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
78 1 15C CC 2402 2480 0.003
78 2 15C CC MO 2412 2462 0.479
78 3 15C CC MO 2422 2452 0.311
78 4 15C CC MO 5745 5825 0.218
78 5 15C CC MO 5755 5795 0.214
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
79 1 15E CC MO 5180 5240 0.03
79 2 15E CC MO 5190 5230 0.045
79 3 15E CC MO ND 5260 5320 0.1
79 4 15E CC MO ND 5270 5310 0.063
79 5 15E CC MO ND 5500 5700 0.072
79 6 15E CC MO ND 5510 5670 0.063
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
80 1 15C CC 2402 2480 0.003
80 2 15C CC MO 2412 2462 0.479
80 3 15C CC MO 2422 2452 0.311
80 4 15C CC MO 5745 5825 0.218
80 5 15C CC MO 5755 5795 0.214
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
81 1 15C CC 2402.00000000 2480.00000000 0.0050000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
82 1 15C CC 2402 2480 0.003
82 2 15C CC MO 2412 2462 0.479
82 3 15C CC MO 2422 2452 0.311
82 4 15C CC MO 5745 5825 0.218
82 5 15C CC MO 5755 5795 0.214
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
83 1 15E CC MO 5180 5240 0.03
83 2 15E CC MO 5190 5230 0.045
83 3 15E CC MO ND 5260 5320 0.1
83 4 15E CC MO ND 5270 5310 0.063
83 5 15E CC MO ND 5500 5700 0.072
83 6 15E CC MO ND 5510 5670 0.063
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
84 1 15C CC 2402.00000000 2480.00000000 0.0050000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
85 1 15C CC 2402 2480 0.003
85 2 15C CC MO 2412 2462 0.479
85 3 15C CC MO 2422 2452 0.311
85 4 15C CC MO 5745 5825 0.218
85 5 15C CC MO 5755 5795 0.214
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
86 1 15C CC 2402.00000000 2480.00000000 0.0050000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
87 1 15E CC MO 5180 5240 0.03
87 2 15E CC MO 5190 5230 0.045
87 3 15E CC MO ND 5260 5320 0.1
87 4 15E CC MO ND 5270 5310 0.063
87 5 15E CC MO ND 5500 5700 0.072
87 6 15E CC MO ND 5510 5670 0.063
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
88 1 15C CC 2402.00000000 2480.00000000 0.0050000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
89 1 15C CC 2402 2480 0.003
89 2 15C CC MO 2412 2462 0.479
89 3 15C CC MO 2422 2452 0.311
89 4 15C CC MO 5745 5825 0.218
89 5 15C CC MO 5755 5795 0.214
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
90 1 15E CC MO 5180 5240 0.03
90 2 15E CC MO 5190 5230 0.045
90 3 15E CC MO ND 5260 5320 0.1
90 4 15E CC MO ND 5270 5310 0.063
90 5 15E CC MO ND 5500 5700 0.072
90 6 15E CC MO ND 5510 5670 0.063
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
91 1 15C CC 2402 2480 0.003
91 2 15C CC MO 2412 2462 0.479
91 3 15C CC MO 2422 2452 0.311
91 4 15C CC MO 5745 5825 0.218
91 5 15C CC MO 5755 5795 0.214
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
92 1 15E CC MO 5180 5240 0.03
92 2 15E CC MO 5190 5230 0.045
92 3 15E CC MO ND 5260 5320 0.1
92 4 15E CC MO ND 5270 5310 0.063
92 5 15E CC MO ND 5500 5700 0.072
92 6 15E CC MO ND 5510 5670 0.063
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
93 1 15C CC 2402.00000000 2480.00000000 0.0050000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
94 1 15B CC
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
95 1 15C CC 2402.00000000 2480.00000000 0.0050000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
96 1 15C CC 2402 2480 0.003
96 2 15C CC MO 2412 2462 0.479
96 3 15C CC MO 2422 2452 0.311
96 4 15C CC MO 5745 5825 0.218
96 5 15C CC MO 5755 5795 0.214
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
97 1 15E CC MO 5180 5240 0.03
97 2 15E CC MO 5190 5230 0.045
97 3 15E CC MO ND 5260 5320 0.1
97 4 15E CC MO ND 5270 5310 0.063
97 5 15E CC MO ND 5500 5700 0.072
97 6 15E CC MO ND 5510 5670 0.063

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC