FCC ID: PPD-QCNFA435 Single Stream 802.11a/b/g/n/ac + BT 4.1 M.2 Type Card

by: Qualcomm Atheros, Inc. latest update: 2020-06-23 model: QCNFA435

Two Hundred And Forty Five grants have been issued under this FCC ID from 12/26/2014 to 06/23/2020 (this is one of sixty-seven releases in 2020 for this grantee). Public details available include manuals, frequency information, and internal & external photos. some products also feature user submitted or linked instructions, troubleshooting guides, warrantee terms, drivers, & password defaults.
permalink for this FCC identifier
search for: Repair details
from iFixIt
Replacement
on Amazon
Trade-in? Recycling locations
eg is reader-supported. when you buy through links on our site, we may earn an affiliate commission.
|
|
|   
eg for Slack usage
app s submitted / available
various Users Manual pdf June 04 2019 / December 07 2019
various Users Manual pdf June 04 2019 / December 07 2019
various Users Manual pdf June 04 2019 / December 07 2019
various Lenovo IdeaPad S540 UserGuide EN Users Manual pdf 1.39 MiB September 27 2019 / March 25 2020 delayed release
various RN NB multi-sar(1)(1) Users Manual pdf 5.63 MiB September 27 2019 / March 25 2020 delayed release
various Users Manual pdf June 04 2019 / December 07 2019
various Users Manual pdf April 23 2019 / October 22 2019
various Users Manual pdf April 23 2019 / October 22 2019
various Users Manual pdf April 23 2019 / October 22 2019
various Users Manual Users Manual pdf 1.15 MiB October 04 2019 / April 04 2020 delayed release
various Internal Photos pdf June 04 2019 / December 07 2019
various Internal Photo Internal Photos pdf 105.27 KiB September 27 2019 / March 25 2020 delayed release
various Internal Photos pdf April 23 2019 / October 22 2019
various Internal photos rev Internal Photos pdf 663.83 KiB October 04 2019 / April 04 2020 delayed release
various IntPho Internal Photos pdf 2.07 MiB May 03 2019 / June 03 2019
various External Photos pdf June 04 2019 / December 07 2019
various External Photo External Photos pdf 1.14 MiB September 27 2019 / March 25 2020 delayed release
various External Photos pdf April 23 2019 / October 22 2019
various External photos rev2 External Photos pdf 608.72 KiB October 04 2019 / April 04 2020 delayed release
various ExtPho External Photos pdf 2.02 MiB May 03 2019 / June 03 2019
various Host Label Info ID Label/Location Info pdf 209.61 KiB April 06 2019 / October 06 2019
various ID Label & Location Info. 20190412 v1 - label ID Label/Location Info pdf 348.66 KiB
various ID Label & Location Info. 20190412 v1 - label location ID Label/Location Info pdf 112.97 KiB
various ID Label & Location Info. 20200525 v1 - Host Label Info ID Label/Location Info pdf 198.17 KiB June 03 2020 / June 23 2020
various Justification of Labeling ID Label/Location Info pdf 278.49 KiB April 06 2019 / October 06 2019
various Label Sample and Label Location ID Label/Location Info pdf 388.14 KiB October 06 2019
various Label sample and label location rev ID Label/Location Info pdf 392.16 KiB October 04 2019 / October 06 2019
various label location ID Label/Location Info pdf 2.07 MiB September 27 2019
various Cover Letters 20200525 v1 - Justification of Labeling FCC Cover Letter(s) pdf 96.15 KiB June 03 2020 / June 23 2020
various Cover Letters 20200525 v1 - cvrltr Class II Permissive Change Cover Letter(s) pdf 39.49 KiB June 03 2020 / June 23 2020
various Cover Letters 20200525 v1 - cvrltr FCC Confidentiality Request (STC Cover Letter(s) pdf 89.83 KiB June 03 2020 / June 23 2020
various Cover Letters 20200525 v1 - cvrltr FCC LOA Cover Letter(s) pdf 17.98 KiB June 03 2020 / June 23 2020
various Power of Attorney Letter Cover Letter(s) pdf 112.87 KiB June 03 2020 / June 23 2020
various Cover Letters 20200525 v1 - cvrltr FCC RSE justification letter Cover Letter(s) pdf 57.73 KiB June 03 2020 / June 23 2020
various External Photos 20200525 v1 - ExtPho External Photos pdf June 03 2020 / December 20 2020 delayed release
various Internal Photos 20200525 v1 - IntPho Internal Photos pdf June 03 2020 / December 20 2020 delayed release
various Operational Description 20200525 v1 - OpDes Antenna spec SPEED Operational Description pdf June 03 2020 confidential
various Operational Description 20200525 v1 - OpDes Antenna spec WNC Operational Description pdf June 03 2020 confidential
various RFExp 20200601 RF Exposure Info pdf 1017.92 KiB June 03 2020 / June 23 2020
various Parts List & Tune Up Info. 20200525 v1 - OpDes Tune-up Parts List/Tune Up Info pdf June 03 2020 confidential
various RF Exposure Info. 20200525 v1 - RFExp Appendix A RF Exposure Info pdf 316.28 KiB June 03 2020 / June 23 2020
various RF Exposure Info. 20200525 v1 - RFExp Appendix B RF Exposure Info pdf 330.32 KiB June 03 2020 / June 23 2020
various RF Exposure Info. 20200525 v1 - RFExp Appendix C RF Exposure Info pdf 2.56 MiB June 03 2020 / June 23 2020
various Test Setup Photos 20200525 v1 - Tsup RFExp Test Setup Photos pdf June 03 2020 / December 20 2020 delayed release
various User Manual 20200525 v1 - Host UserMan Users Manual pdf June 03 2020 / December 20 2020 delayed release
various User Manual 20200525 v1 - Host UserMan FCC statement Users Manual pdf June 03 2020 / December 20 2020 delayed release
various User Manual 20200525 v1 - Host UserMan Safety and Regulatory Information Users Manual pdf June 03 2020 / December 20 2020 delayed release
various Agent Authorization Cover Letter(s) pdf 179.81 KiB January 21 2020
various Confidentiality Request (Short term) rev Cover Letter(s) pdf 242.41 KiB January 21 2020
various Contact Authorization Cover Letter(s) pdf 18.61 KiB January 21 2020
various Description of Permissive Change Cover Letter(s) pdf 27.88 KiB January 21 2020
various RF Exposure Info (SAR) Part 1 RF Exposure Info pdf 1.89 MiB January 21 2020
various RF Exposure Info (SAR) Part 2 RF Exposure Info pdf 5.30 MiB January 21 2020
various Test setup photos (SAR) Test Setup Photos pdf 542.84 KiB January 21 2020 / July 19 2020 delayed release
various Agent Authorization rev Cover Letter(s) pdf 182.42 KiB October 04 2019 / October 06 2019
various Declaration Letter Power rev Cover Letter(s) pdf 165.57 KiB October 04 2019 / October 06 2019
various Module in Host Declaration rev Cover Letter(s) pdf 270.65 KiB October 04 2019 / October 06 2019
various RSE Justification letter rev Cover Letter(s) pdf 266.56 KiB October 04 2019 / October 06 2019
various Test setup photos (SAR) rev Test Setup Photos pdf 474.50 KiB October 04 2019 / April 04 2020 delayed release
various Description of Change Cover Letter(s) pdf 270.43 KiB October 06 2019
various 4789114486-SAR-435-2 App A Photo Test Setup Photos pdf 275.41 KiB September 27 2019 / March 25 2020 delayed release
various 4789114486-SAR-435-2 App B System Check Plots Test Report pdf 206.58 KiB September 27 2019
various 4789114486-SAR-435-2 App C Highest Test Plots Test Report pdf 338.37 KiB September 27 2019
various 4789114486-SAR-435-2 App D Cal. Certificates Test Report pdf 2.44 MiB September 27 2019
various 4789114486-SAR-435-2 S540-13API with FCC SAR Test Report Test Report pdf 861.22 KiB September 27 2019
various FCC C2PC request form Cover Letter(s) pdf 73.18 KiB September 27 2019
various FCC Signature Authorization Atheros Stanley Lin Cover Letter(s) pdf 18.54 KiB September 27 2019
various Cover Letter(s) pdf 43.10 KiB September 27 2019
various FCC long and short term confidentility Cover Letter(s) pdf 124.39 KiB September 27 2019
various SAR tune-up power Lenovo IdeaPad S540-13API 2019-9-12 Parts List/Tune Up Info pdf September 27 2019 confidential
various S540-13 Antenna Luxshare-ICT DC33001LX00 Operational Description pdf September 27 2019 confidential
various S540-13 Antenna Speedwire DC33001LV00 Operational Description pdf September 27 2019 confidential
various TC692673 Cover Letter(s) pdf 78.54 KiB September 29 2019 / September 27 2019
various Class II Permissive Change Cover Letter(s) pdf 72.32 KiB April 06 2019 / October 06 2019
various Confidentiality Request Cover Letter(s) pdf 122.18 KiB April 06 2019 / October 06 2019
various LOA Cover Letter(s) pdf 17.97 KiB April 06 2019 / October 06 2019
various OpDes Antenna spec WNC Operational Description pdf June 04 2019 confidential
various OpDes Antenna spec speed Operational Description pdf June 04 2019 confidential
various Power of Attorney Letter Cover Letter(s) pdf 121.13 KiB April 06 2019 / October 06 2019
various RSE justification letter Cover Letter(s) pdf 71.87 KiB April 06 2019 / October 06 2019
various RF Exposure Info pdf April 06 2019 / October 06 2019
various RF Exposure Info pdf April 06 2019 / October 06 2019
various RF Exposure Info pdf April 06 2019 / October 06 2019
various RF Exposure Info pdf April 06 2019 / October 06 2019
various Test Setup Photos pdf June 04 2019 / December 07 2019
various Tune up Parts List/Tune Up Info pdf June 04 2019 confidential
various RF Exposure Info pdf April 06 2019 / October 06 2019
various RF Exposure Info pdf April 06 2019 / October 06 2019
various RF Exposure Info pdf April 06 2019 / October 06 2019
various Cover Letters 20190412 v1 - FCC C2PC request form Cover Letter(s) pdf 72.78 KiB
various Cover Letters 20190412 v1 - FCC RSE justification letter Cover Letter(s) pdf 73.91 KiB
various Cover Letters 20190412 v1 - FCC agent authorization Cover Letter(s) pdf 124.56 KiB
various Cover Letters 20190412 v1 - FCC long and short term confidentility Cover Letter(s) pdf 124.38 KiB
various Operational Description 20190412 v1 - Antenna Specification Amphenol Operational Description pdf April 23 2019 confidential
various Operational Description 20190412 v1 - Antenna Specification Speed Operational Description pdf April 23 2019 confidential
various Parts List & Tune Up Info. 20190412 v1 - Tune up power Parts List/Tune Up Info pdf April 23 2019 confidential
various RF Exposure Info pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various Test Setup Photos pdf April 23 2019 / October 22 2019
various Test Setup Photos pdf May 03 2019 / June 03 2019
various Lenovo IdeaPad S540 UserGuide EN Users Manual pdf 1.39 MiB September 27 2019 / March 25 2020 delayed release
various RN NB multi-sar(1)(1) Users Manual pdf 5.63 MiB September 27 2019 / March 25 2020 delayed release
various Users Manual Users Manual pdf 1.15 MiB October 04 2019 / April 04 2020 delayed release
various Internal Photo Internal Photos pdf 105.27 KiB September 27 2019 / March 25 2020 delayed release
various Internal photos rev Internal Photos pdf 663.83 KiB October 04 2019 / April 04 2020 delayed release
various IntPho Internal Photos pdf 2.07 MiB May 03 2019 / June 03 2019
various External Photo External Photos pdf 1.14 MiB September 27 2019 / March 25 2020 delayed release
various External photos rev2 External Photos pdf 608.72 KiB October 04 2019 / April 04 2020 delayed release
various ExtPho External Photos pdf 2.02 MiB May 03 2019 / June 03 2019
various Host Label Info ID Label/Location Info pdf 209.61 KiB April 06 2019 / October 06 2019
various ID Label & Location Info. 20190412 v1 - label ID Label/Location Info pdf 348.66 KiB
various ID Label & Location Info. 20190412 v1 - label location ID Label/Location Info pdf 112.97 KiB
various ID Label & Location Info. 20200525 v1 - Host Label Info ID Label/Location Info pdf 198.17 KiB June 03 2020 / June 23 2020
various Justification of Labeling ID Label/Location Info pdf 278.49 KiB April 06 2019 / October 06 2019
various Label Sample and Label Location ID Label/Location Info pdf 388.14 KiB October 06 2019
various Label sample and label location rev ID Label/Location Info pdf 392.16 KiB October 04 2019 / October 06 2019
various label location ID Label/Location Info pdf 2.07 MiB September 27 2019
various Cover Letters 20200525 v1 - Justification of Labeling FCC Cover Letter(s) pdf 96.15 KiB June 03 2020 / June 23 2020
various Cover Letters 20200525 v1 - cvrltr Class II Permissive Change Cover Letter(s) pdf 39.49 KiB June 03 2020 / June 23 2020
various Cover Letters 20200525 v1 - cvrltr FCC Confidentiality Request (STC Cover Letter(s) pdf 89.83 KiB June 03 2020 / June 23 2020
various Cover Letters 20200525 v1 - cvrltr FCC LOA Cover Letter(s) pdf 17.98 KiB June 03 2020 / June 23 2020
various Power of Attorney Letter Cover Letter(s) pdf 112.87 KiB June 03 2020 / June 23 2020
various Cover Letters 20200525 v1 - cvrltr FCC RSE justification letter Cover Letter(s) pdf 57.73 KiB June 03 2020 / June 23 2020
various RFExp 20200601 RF Exposure Info pdf 1017.92 KiB June 03 2020 / June 23 2020
various RF Exposure Info. 20200525 v1 - RFExp Appendix A RF Exposure Info pdf 316.28 KiB June 03 2020 / June 23 2020
various RF Exposure Info. 20200525 v1 - RFExp Appendix B RF Exposure Info pdf 330.32 KiB June 03 2020 / June 23 2020
various RF Exposure Info. 20200525 v1 - RFExp Appendix C RF Exposure Info pdf 2.56 MiB June 03 2020 / June 23 2020
various Agent Authorization Cover Letter(s) pdf 179.81 KiB January 21 2020
various Confidentiality Request (Short term) rev Cover Letter(s) pdf 242.41 KiB January 21 2020
various Contact Authorization Cover Letter(s) pdf 18.61 KiB January 21 2020
various Description of Permissive Change Cover Letter(s) pdf 27.88 KiB January 21 2020
various RF Exposure Info (SAR) Part 1 RF Exposure Info pdf 1.89 MiB January 21 2020
various RF Exposure Info (SAR) Part 2 RF Exposure Info pdf 5.30 MiB January 21 2020
various Test setup photos (SAR) Test Setup Photos pdf 542.84 KiB January 21 2020 / July 19 2020 delayed release
various Agent Authorization rev Cover Letter(s) pdf 182.42 KiB October 04 2019 / October 06 2019
various Declaration Letter Power rev Cover Letter(s) pdf 165.57 KiB October 04 2019 / October 06 2019
various Module in Host Declaration rev Cover Letter(s) pdf 270.65 KiB October 04 2019 / October 06 2019
various RSE Justification letter rev Cover Letter(s) pdf 266.56 KiB October 04 2019 / October 06 2019
various Test setup photos (SAR) rev Test Setup Photos pdf 474.50 KiB October 04 2019 / April 04 2020 delayed release
various Description of Change Cover Letter(s) pdf 270.43 KiB October 06 2019
various 4789114486-SAR-435-2 App A Photo Test Setup Photos pdf 275.41 KiB September 27 2019 / March 25 2020 delayed release
various 4789114486-SAR-435-2 App B System Check Plots Test Report pdf 206.58 KiB September 27 2019
various 4789114486-SAR-435-2 App C Highest Test Plots Test Report pdf 338.37 KiB September 27 2019
various 4789114486-SAR-435-2 App D Cal. Certificates Test Report pdf 2.44 MiB September 27 2019
various 4789114486-SAR-435-2 S540-13API with FCC SAR Test Report Test Report pdf 861.22 KiB September 27 2019
various FCC C2PC request form Cover Letter(s) pdf 73.18 KiB September 27 2019
various FCC Signature Authorization Atheros Stanley Lin Cover Letter(s) pdf 18.54 KiB September 27 2019
various FCC long and short term confidentility Cover Letter(s) pdf 124.39 KiB September 27 2019
various TC692673 Cover Letter(s) pdf 78.54 KiB September 29 2019 / September 27 2019
various Class II Permissive Change Cover Letter(s) pdf 72.32 KiB April 06 2019 / October 06 2019
various Confidentiality Request Cover Letter(s) pdf 122.18 KiB April 06 2019 / October 06 2019
various LOA Cover Letter(s) pdf 17.97 KiB April 06 2019 / October 06 2019
various Power of Attorney Letter Cover Letter(s) pdf 121.13 KiB April 06 2019 / October 06 2019
various RSE justification letter Cover Letter(s) pdf 71.87 KiB April 06 2019 / October 06 2019
various Cover Letters 20190412 v1 - FCC C2PC request form Cover Letter(s) pdf 72.78 KiB
various Cover Letters 20190412 v1 - FCC agent authorization Cover Letter(s) pdf 124.56 KiB

frequency equipment class purpose
1 2020-06-23 2412 ~ 2462 DTS - Digital Transmission System Class II Permissive Change
2 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
3 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
4 2020-01-21 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
5 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
6 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
7 5745 ~ 5825 DTS - Digital Transmission System
8 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
9 5745 ~ 5825 DTS - Digital Transmission System
10 2019-10-06 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
11 5745 ~ 5825 DTS - Digital Transmission System
12 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
13 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
14 5745 ~ 5825 DTS - Digital Transmission System
15 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
16 2019-09-27 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
17 2412 ~ 2462 DTS - Digital Transmission System
18 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
19 2019-06-10 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
20 2412 ~ 2462 DTS - Digital Transmission System
21 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
22 2019-04-25 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
23 5500 ~ 5720 NII - Unlicensed National Information Infrastructure TX
24 2412 ~ 2462 DTS - Digital Transmission System
25 2019-03-05 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
26 5180 ~ 5240 NII - Unlicensed National Information Infrastructure TX
27 2412 ~ 2462 DTS - Digital Transmission System
28 2019-02-01 5500 ~ 5720 NII - Unlicensed National Information Infrastructure TX
29 2402 ~ 2480 DTS - Digital Transmission System
30 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
31 2019-01-31 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
32 5500 ~ 5720 NII - Unlicensed National Information Infrastructure TX
33 2402 ~ 2480 DTS - Digital Transmission System
34 2019-01-30 5500 ~ 5720 NII - Unlicensed National Information Infrastructure TX
35 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
36 2412 ~ 2462 DTS - Digital Transmission System
37 2019-01-29 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
38 2412 ~ 2462 DTS - Digital Transmission System
39 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
40 2019-01-25 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
41 5260 ~ 5320 NII - Unlicensed National Information Infrastructure TX
42 2412 ~ 2462 DTS - Digital Transmission System
43 2019-01-02 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
44 2402 ~ 2480 DTS - Digital Transmission System
45 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
46 2018-11-09 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
47 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
48 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
49 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
50 2412 ~ 2462 DTS - Digital Transmission System
51 2412 ~ 2462 DTS - Digital Transmission System
52 2018-09-18 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
53 2412 ~ 2462 DTS - Digital Transmission System
54 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
55 2018-09-04 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
56 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
57 2412 ~ 2462 DTS - Digital Transmission System
58 2018-08-30 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
59 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
60 2412 ~ 2462 DTS - Digital Transmission System
61 2018-08-23 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
62 2412 ~ 2462 DTS - Digital Transmission System
63 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
64 2018-07-03 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
65 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
66 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
67 2412 ~ 2462 DTS - Digital Transmission System
68 2412 ~ 2462 DTS - Digital Transmission System
69 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
70 2018-07-01 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
71 2412 ~ 2462 DTS - Digital Transmission System
72 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
73 2018-06-07 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
74 2412 ~ 2462 DTS - Digital Transmission System
75 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
76 2018-06-06 2412 ~ 2462 DTS - Digital Transmission System
77 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
78 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
79 2018-05-24 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
80 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
81 2412 ~ 2462 DTS - Digital Transmission System
82 2018-05-06 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
83 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
84 2412 ~ 2462 DTS - Digital Transmission System
85 2018-05-04 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
86 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
87 2412 ~ 2462 DTS - Digital Transmission System
88 2018-03-21 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
89 2412 ~ 2462 DTS - Digital Transmission System
90 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
91 2018-03-16 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
92 2412 ~ 2462 DTS - Digital Transmission System
93 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
94 2018-03-09 2412 ~ 2462 DTS - Digital Transmission System
95 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
96 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
97 2018-03-08 2412 ~ 2462 DTS - Digital Transmission System
98 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
99 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
100 2018-03-01 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
101 2412 ~ 2462 DTS - Digital Transmission System
102 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
103 2018-02-28 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
104 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
105 2412 ~ 2462 DTS - Digital Transmission System
106 2018-02-14 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
107 2412 ~ 2462 DTS - Digital Transmission System
108 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
109 2018-02-08 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
110 2412 ~ 2462 DTS - Digital Transmission System
111 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
112 2018-02-07 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
113 2412 ~ 2462 DTS - Digital Transmission System
114 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
115 2018-02-05 2412 ~ 2462 DTS - Digital Transmission System
116 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
117 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
118 2017-12-15 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
119 2412 ~ 2462 DTS - Digital Transmission System
120 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
121 2017-11-02 2412 ~ 2462 DTS - Digital Transmission System
122 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
123 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
124 2017-10-30 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
125 2412 ~ 2462 DTS - Digital Transmission System
126 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
127 2017-09-25 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
128 2412 ~ 2462 DTS - Digital Transmission System
129 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
130 2017-09-20 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
131 2412 ~ 2462 DTS - Digital Transmission System
132 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
133 2017-08-18 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
134 2412 ~ 2462 DTS - Digital Transmission System
135 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
136 2017-08-17 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
137 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
138 2412 ~ 2462 DTS - Digital Transmission System
139 2017-06-28 2402 ~ 2480 DTS - Digital Transmission System
140 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
141 5500 ~ 5720 NII - Unlicensed National Information Infrastructure TX
142 2017-06-26 2402 ~ 2480 DTS - Digital Transmission System
143 5180 ~ 5240 NII - Unlicensed National Information Infrastructure TX
144 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
145 2017-06-15 5500 ~ 5720 NII - Unlicensed National Information Infrastructure TX
146 2402 ~ 2480 DTS - Digital Transmission System
147 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
148 2017-06-05 2412 ~ 2462 DTS - Digital Transmission System
149 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
150 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
151 2017-04-18 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
152 2412 ~ 2462 DTS - Digital Transmission System
153 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
154 2017-03-29 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
155 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
156 2412 ~ 2462 DTS - Digital Transmission System
157 2017-03-28 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
158 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
159 2412 ~ 2462 DTS - Digital Transmission System
160 2017-03-08 2412 ~ 2462 DTS - Digital Transmission System
161 5500 ~ 5720 NII - Unlicensed National Information Infrastructure TX
162 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter Class II permissive change or modification of presently authorized equipment
163 2017-02-08 2412 ~ 2462 DTS - Digital Transmission System Class II Permissive Change
164 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
165 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
166 2017-01-02 2412 ~ 2462 DTS - Digital Transmission System
167 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
168 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
169 2016-11-23 2412 ~ 2462 DTS - Digital Transmission System
170 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
171 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
172 2016-11-22 2412 ~ 2462 DTS - Digital Transmission System
173 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
174 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
175 2016-09-29 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
176 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
177 2412 ~ 2462 DTS - Digital Transmission System
178 2016-09-20 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
179 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
180 2412 ~ 2462 DTS - Digital Transmission System
181 2016-09-13 2412 ~ 2462 DTS - Digital Transmission System
182 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
183 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
184 2016-09-01 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
185 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
186 2412 ~ 2462 DTS - Digital Transmission System
187 2016-08-31 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
188 2412 ~ 2462 DTS - Digital Transmission System
189 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
190 2016-08-05 2412 ~ 2462 DTS - Digital Transmission System
191 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
192 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
193 2016-06-15 2412 ~ 2462 DTS - Digital Transmission System
194 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
195 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
196 2016-06-02 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
197 2016-05-20 2412 ~ 2462 DTS - Digital Transmission System
198 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
199 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
200 2016-05-05 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
201 2412 ~ 2462 DTS - Digital Transmission System
202 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
203 2016-04-07 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
204 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
205 2412 ~ 2462 DTS - Digital Transmission System
206 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
207 2412 ~ 2462 DTS - Digital Transmission System
208 2016-04-04 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
209 2016-02-24 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
210 2412 ~ 2462 DTS - Digital Transmission System
211 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
212 2015-09-30 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
213 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
214 2412 ~ 2462 DTS - Digital Transmission System
215 2015-09-28 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
216 2412 ~ 2462 DTS - Digital Transmission System
217 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
218 2015-09-25 2412 ~ 2462 DTS - Digital Transmission System
219 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
220 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
221 2015-09-10 5500 ~ 5720 NII - Unlicensed National Information Infrastructure TX
222 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
223 5745 ~ 5825 DTS - Digital Transmission System
224 2015-09-09 5745 ~ 5825 DTS - Digital Transmission System
225 2412 ~ 2462 DTS - Digital Transmission System
226 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
227 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
228 5500 ~ 5720 NII - Unlicensed National Information Infrastructure TX
229 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
230 2015-09-02 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
231 5500 ~ 5720 NII - Unlicensed National Information Infrastructure TX
232 5745 ~ 5825 DTS - Digital Transmission System
233 2015-08-28 5500 ~ 5720 NII - Unlicensed National Information Infrastructure TX
234 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
235 5745 ~ 5825 DTS - Digital Transmission System
236 2015-05-29 5745 ~ 5825 DTS - Digital Transmission System
237 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
238 5500 ~ 5720 NII - Unlicensed National Information Infrastructure TX
239 2015-05-11 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
240 5745 ~ 5825 DTS - Digital Transmission System
241 5500 ~ 5720 NII - Unlicensed National Information Infrastructure TX
242 2014-12-26 JBP - Part 15 Class B Computing Device Peripheral Original Equipment
243 5500 ~ 5720 NII - Unlicensed National Information Infrastructure TX
244 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
245 5745 ~ 5825 DTS - Digital Transmission System

Application Forms

app s Applicant Information
various Effective 2020-06-23
various 2020-01-21
various 2019-10-06
various 2019-09-27
various 2019-06-10
various 2019-04-25
various 2019-03-05
various 2019-02-01
various 2019-01-31
various 2019-01-30
various 2019-01-29
various 2019-01-25
various 2019-01-02
various 2018-11-09
various 2018-09-18
various 2018-09-04
various 2018-08-30
various 2018-08-23
various 2018-07-03
various 2018-07-01
various 2018-06-07
various 2018-06-06
various 2018-05-24
various 2018-05-06
various 2018-05-04
various 2018-03-21
various 2018-03-16
various 2018-03-09
various 2018-03-08
various 2018-03-01
various 2018-02-28
various 2018-02-14
various 2018-02-08
various 2018-02-07
various 2018-02-05
various 2017-12-15
various 2017-11-02
various 2017-10-30
various 2017-09-25
various 2017-09-20
various 2017-08-18
various 2017-08-17
various 2017-06-28
various 2017-06-26
various 2017-06-15
various 2017-06-05
various 2017-04-18
various 2017-03-29
various 2017-03-28
various 2017-03-08
various 2017-02-08
various 2017-01-02
various 2016-11-23
various 2016-11-22
various 2016-09-29
various 2016-09-20
various 2016-09-13
various 2016-09-01
various 2016-08-31
various 2016-08-05
various 2016-06-15
various 2016-06-02
various 2016-05-20
various 2016-05-05
various 2016-04-07
various 2016-04-04
various 2016-02-24
various 2015-09-30
various 2015-09-28
various 2015-09-25
various 2015-09-10
various 2015-09-09
various 2015-09-02
various 2015-08-28
various 2015-05-29
various 2015-05-11
various 2014-12-26
various Applicant's complete, legal business name Qualcomm Atheros, Inc.
various FCC Registration Number (FRN) 0003716743
various Physical Address 1700 Technology Dr
various San Jose
various San Jose, 95110
various United States
app s TCB Information
various TCB Application Email Address L******@ul.com
various c******@nacsemc.com
various L******@ul.com
various c******@ccsemc.com
various TCB Scope A4: UNII devices & low power transmitters using spread spectrum techniques
various A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
app s FCC ID
various Grantee Code PPD
various Equipment Product Code QCNFA435
app s Person at the applicant's address to receive grant or for contact
various Name P**** G******
various Title Vice President, Regulatory Engineering
various Telephone Number 858-6********
various Fax Number 858-6********
various E-mail p******@qti.qualcomm.com
app s Technical Contact
various Firm Name Sporton International Inc.
various Compliance Certification Services
various DEKRA Testing and Certification Co., Ltd.
various QuieTek Corporation
various Name J**** T******
various J****** F********
various V**** W****
various M****** C****
various Physical Address No.52, HwaYa 1st Rd.
various No. 10, Weiye Rd,Innovation Park
various No. 10, Weiye Rd
various No.5-22, Ruishukeng, Linkou Dist.
various No. 52, HawYa 1st Rd
various Taoyuan City, 333
various Kunshan, 215300
various New Taipei City, 24451
various Tao Yuan Hsien, 333
various New Taipei City
various Kunshan, JiangSu, 215000
various Taiwan
various China
various Telephone Number 886-3******** Extension:
various 86 0********
various 886 2******** Extension:
various 886 2********
various 03327********
various 03327******** Extension:
various 88628******** Extension:
various 88628********
various +8651********
various Fax Number 886-3********
various 886 2********
various 03327********
various 88628********
various E-mail j******@ccsrf.com
various v******@dekra.com,QCARG@qti.qualcomm.com
various a******@sporton.com.tw,evanchen@sporton.com.tw
various m******@quietek.com,QCARG@qti.qualcomm.com
various m******@quietek.com
app s Non Technical Contact
various Firm Name DEKRA Testing and Certification Co., Ltd.
various Sporton International Inc.
various QuieTek Corporation
various Name V**** W******
various J**** T******
various M******** C******
various Physical Address No.5-22, Ruishukeng, Linkou Dist.
various No. 52, HawYa 1st Rd
various New Taipei City, 24451
various Tao Yuan Hsien, 333
various New Taipei City
various Taiwan
various Telephone Number 886 2******** Extension:
various 886 2********
various 03327********
various 03327******** Extension:
various 88628********
various Fax Number 886 2********
various 03327********
various 88628********
various E-mail v******@dekra.com,QCARG@qti.qualcomm.com
various a******@sporton.com.tw,evanchen@sporton.com.tw
various m******@quietek.com,QCARG@qti.qualcomm.com
various m******@quietek.com
app s Confidentiality (long or short term)
various Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousNo
variousLong-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousNo
variousIf so, specify the short-term confidentiality release date (MM/DD/YYYY format)12/20/2020
various07/19/2020
various04/04/2020
various03/25/2020
various12/07/2019
various10/22/2019
various03/06/2019
various07/31/2019
various07/29/2019
various07/28/2019
various07/24/2019
various01/17/2019
various05/08/2019
various03/17/2019
various10/19/2018
various08/31/2018
various02/19/2019
various12/30/2018
various12/29/2018
various10/23/2018
various10/31/2018
various09/17/2018
various09/12/2018
various09/05/2018
various09/04/2018
various08/28/2018
various08/27/2018
various08/13/2018
various02/11/2018
various08/06/2018
various01/14/2018
various12/02/2017
various11/29/2017
various03/24/2018
various03/20/2018
various02/14/2018
various02/13/2018
various08/27/2017
various08/25/2017
various07/05/2017
various11/28/2017
various10/14/2017
various09/25/2017
various09/24/2017
various05/01/2017
various02/18/2017
various06/29/2017
various05/22/2017
various05/21/2017
various03/28/2017
various01/27/2017
various03/12/2017
various02/28/2017
various02/27/2017
various02/01/2017
various12/13/2016
various11/02/2016
various10/04/2016
various10/01/2016
various08/22/2016
various03/28/2016
various03/26/2016
various03/23/2016
various03/07/2016
various10/24/2015
various02/24/2016
various07/13/2015
various11/07/2015
various06/24/2015
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
various Is this application for software defined/cognitive radio authorization?No
variousEquipment ClassDTS - Digital Transmission System
variousDSS - Part 15 Spread Spectrum Transmitter
variousNII - Unlicensed National Information Infrastructure TX
variousJBP - Part 15 Class B Computing Device Peripheral
variousDescription of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)Single Stream 802.11a/b/g/n/ac + BT 4.1 M.2 Type Card
variousSingle Stream 802.11 a/b/g/n/ac + BT 4.1 M.2 Type Card
variousSingle Stream 802.11a/b/g/n/ac+BT4.1 M.2 Type Card
variousSingle Stream 802.11a/b/g/n/ac+ BT 4.1 M.2 Type Card
variousSinglStream 802.11a/b/g/n/ac + BT 4.1 M.2 Type Card
variousSINGLE STREAM 802.11A/B/G/N/AC + BT 4.1 M.2 TYPE CARD
variousSingle Stream 802.11a/b/g/n/ac + BT4.1 M.2 Type Card
variousSingle Stream 802.11a/b/g/n/ac+BT4.1 M.2 Type Card
variousRelated OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?No
variousModular Equipment TypeSingle Modular Approval
variousDoes not apply
variousLimited Single Modular Approval
variousPurpose / Application is forClass II Permissive Change
variousClass II permissive change or modification of presently authorized equipment
variousOriginal Equipment
variousComposite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?Yes
variousRelated Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
variousGrant CommentsClass II permissive change to add the specific portable host (Dell notebook model P102F) and antennas as described in this filing. Modular Approval. Output power is conducted. This device supports 802.11n/ac bandwidths of 20MHz and 40MHz in the 2.4GHz band and 20MHz, 40MHz, and 80MHz in the 5.8 GHz band. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation as performed in this filing. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body transmission condition in this filing under this FCC ID is 0.75W/kg. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.38 W/kg and 1.19 W/kg, respectively
variousClass II permissive change to add the specific portable host (Dell notebook model P102F) and antennas as described in this filing. Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 0.41 W/kg and 1.24 W/kg, respectively.
variousClass II permissive change to add the specific portable host (Dell notebook model P102F) and antennas as described in this filing. Modular Approval. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body condition in this filing under this FCC ID is 1.04 W/kg. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.30 W/kg and 1.31 W/kg, respectively.
variousClass II Permissive Change for correcting the antenna model for a portable host (Model: Lenovo ThinkBook 14-IML, 20RV; Brand: Lenovo) as described in this filing. Main/TX1 Antenna; Type: PIFA; Manufacturer: Wistron Neweb Corp.; Parts Number: DQ6615G4700 (81EAA615.G47): 2.4 GHz: 0.93 dBi; 5.15-5.35 GHz: 1.68 dBi; 5.47-5.725 GHz: 1.33 dBi; 5.725-5.85 GHz: 1.35 dBi. Aux/TX2 Antenna; Type: PIFA; Manufacturer: Wistron Neweb Corp.; Parts Number: DQ6615G4700 (81EAA615.G47): 2.4 GHz: 0.69 dBi; 5.15-5.35 GHz: 1.52 dBi; 5.47-5.725 GHz: 1.54 dBi; 5.725-5.85 GHz: 1.86 dBi. Class II permissive change filing for new version chip change, show compliance with New U-NII-3 rule per FCC ET docket No. 13-49 and add 5 mm modular SAR by reduced power as documented in this filing. Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value is <0.10 W/Kg.
variousClass II Permissive Change for correcting the antenna model for a portable host (Model: Lenovo ThinkBook 15-IML, 20RW; Brand: Lenovo) as described in this filing. The highest reported SAR value for Laptop PC Mode exposure condition is 0.55 W/kg. TX1 Antenna; Type: PIFA; Manufacturer: Wistron Neweb Corp.; Parts Number: DQ6615G4900 (81EAA615.G49): 2.4 GHz: 0.68 dBi; 5.15-5.35 GHz: 0.46 dBi; 5.47-5.725 GHz: 0.79 dBi; 5.725-5.85 GHz: 0.79 dBi. TX2 Antenna; Type: PIFA; Manufacturer: Wistron Neweb Corp.; Parts Number: DQ6615G4900 (81EAA615.G49): 2.4 GHz: 0.60 dBi; 5.15-5.35 GHz: -1.35 dBi; 5.47-5.725 GHz: 0.05 dBi; 5.725-5.85 GHz: 0.05 dBi. Class II permissive change filing for new version chip change, show compliance with New U-NII-3 rule per FCC ET docket No. 13-49 and add 5 mm modular SAR by reduced power as documented in this filing. Modular Approval. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value is 0.71 W/Kg.
variousClass II Permissive Change for correcting the antenna model for a portable host (Model: Lenovo ThinkBook 14-IML, 20RV; Brand: Lenovo) as described in this filing. The highest reported SAR value for Laptop PC Mode exposure condition is 0.16 W/kg. Main/TX1 Antenna; Type: PIFA; Manufacturer: Wistron Neweb Corp.; Parts Number: DQ6615G4700 (81EAA615.G47): 2.4 GHz: 0.93 dBi; 5.15-5.35 GHz: 1.68 dBi; 5.47-5.725 GHz: 1.33 dBi; 5.725-5.85 GHz: 1.35 dBi. Aux/TX2 Antenna; Type: PIFA; Manufacturer: Wistron Neweb Corp.; Parts Number: DQ6615G4700 (81EAA615.G47): 2.4 GHz: 0.69 dBi; 5.15-5.35 GHz: 1.52 dBi; 5.47-5.725 GHz: 1.54 dBi; 5.725-5.85 GHz: 1.86 dBi. Class II permissive change filing for new version chip change, show compliance with New U-NII-3 rule per FCC ET docket No. 13-49 and add 5 mm modular SAR by reduced power as documented in this filing. Modular Approval. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value is 0.71 W/Kg.
variousClass II Permissive Change for correcting the antenna model for a portable host (Model: Lenovo ThinkBook 14-IML, 20RV; Brand: Lenovo) as described in this filing. The highest reported SAR value for Laptop PC Mode exposure condition is 0.29 W/kg. Main/TX1 Antenna; Type: PIFA; Manufacturer: Wistron Neweb Corp.; Parts Number: DQ6615G4700 (81EAA615.G47): 2.4 GHz: 0.93 dBi; 5.15-5.35 GHz: 1.68 dBi; 5.47-5.725 GHz: 1.33 dBi; 5.725-5.85 GHz: 1.35 dBi. Aux/TX2 Antenna; Type: PIFA; Manufacturer: Wistron Neweb Corp.; Parts Number: DQ6615G4700 (81EAA615.G47): 2.4 GHz: 0.69 dBi; 5.15-5.35 GHz: 1.52 dBi; 5.47-5.725 GHz: 1.54 dBi; 5.725-5.85 GHz: 1.86 dBi. Modular Approval. Output power is conducted. This device supports 802.11n/ac bandwidths of 20MHz and 40MHz in the 2.4GHz band and 20MHz, 40MHz, and 80MHz in the 5.8 GHz band. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation as performed in this filing. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II Permissive Change for correcting the antenna model for a portable host (Model: Lenovo ThinkBook 15-IML, 20RW; Brand: Lenovo) as described in this filing. TX1 Antenna; Type: PIFA; Manufacturer: Wistron Neweb Corp.; Parts Number: DQ6615G4900 (81EAA615.G49): 2.4 GHz: 0.68 dBi; 5.15-5.35 GHz: 0.46 dBi; 5.47-5.725 GHz: 0.79 dBi; 5.725-5.85 GHz: 0.79 dBi. TX2 Antenna; Type: PIFA; Manufacturer: Wistron Neweb Corp.; Parts Number: DQ6615G4900 (81EAA615.G49): 2.4 GHz: 0.60 dBi; 5.15-5.35 GHz: -1.35 dBi; 5.47-5.725 GHz: 0.05 dBi; 5.725-5.85 GHz: 0.05 dBi. Class II permissive change filing for new version chip change, show compliance with New U-NII-3 rule per FCC ET docket No. 13-49 and add 5 mm modular SAR by reduced power as documented in this filing. Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value is <0.10 W/Kg.
variousClass II Permissive Change for correcting the antenna model for a portable host (Model: Lenovo ThinkBook 15-IML, 20RW; Brand: Lenovo) as described in this filing. The highest reported SAR value for Laptop PC Mode exposure condition is 0.23 W/kg. TX1 Antenna; Type: PIFA; Manufacturer: Wistron Neweb Corp.; Parts Number: DQ6615G4900 (81EAA615.G49): 2.4 GHz: 0.68 dBi; 5.15-5.35 GHz: 0.46 dBi; 5.47-5.725 GHz: 0.79 dBi; 5.725-5.85 GHz: 0.79 dBi. TX2 Antenna; Type: PIFA; Manufacturer: Wistron Neweb Corp.; Parts Number: DQ6615G4900 (81EAA615.G49): 2.4 GHz: 0.60 dBi; 5.15-5.35 GHz: -1.35 dBi; 5.47-5.725 GHz: 0.05 dBi; 5.725-5.85 GHz: 0.05 dBi. Modular Approval. Output power is conducted. This device supports 802.11n/ac bandwidths of 20MHz and 40MHz in the 2.4GHz band and 20MHz, 40MHz, and 80MHz in the 5.8 GHz band. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation as performed in this filing. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II Permissive Change for adding one new portable host platform (Model: Lenovo ThinkBook 15-IML, 20RW; Brand: Lenovo) with reduced power as described in this filing. TX1 Antenna; Type: PIFA; Manufacturer: Wistron Neweb Corp.; Parts Number: DQ6615G5000 (81EAA615.G50): 2.4 GHz: 0.68 dBi; 5.15-5.35 GHz: 0.46 dBi; 5.47-5.725 GHz: 0.79 dBi; 5.725-5.85 GHz: 0.79 dBi. TX2 Antenna; Type: PIFA; Manufacturer: Wistron Neweb Corp.; Parts Number: DQ6615G5000 (81EAA615.G50): 2.4 GHz: 0.60 dBi; 5.15-5.35 GHz: -1.35 dBi; 5.47-5.725 GHz: 0.05 dBi; 5.725-5.85 GHz: 0.05 dBi. Class II permissive change filing for new version chip change, show compliance with New U-NII-3 rule per FCC ET docket No. 13-49 and add 5 mm modular SAR by reduced power as documented in this filing. Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value is <0.10 W/Kg.
variousClass II Permissive Change for adding one new portable host platform (Model: Lenovo ThinkBook 15-IML, 20RW; Brand: Lenovo) with reduced power as described in this filing. The highest reported SAR value for Laptop PC Mode exposure condition is 0.23 W/kg. TX1 Antenna; Type: PIFA; Manufacturer: Wistron Neweb Corp.; Parts Number: DQ6615G5000 (81EAA615.G50): 2.4 GHz: 0.68 dBi; 5.15-5.35 GHz: 0.46 dBi; 5.47-5.725 GHz: 0.79 dBi; 5.725-5.85 GHz: 0.79 dBi. TX2 Antenna; Type: PIFA; Manufacturer: Wistron Neweb Corp.; Parts Number: DQ6615G5000 (81EAA615.G50): 2.4 GHz: 0.60 dBi; 5.15-5.35 GHz: -1.35 dBi; 5.47-5.725 GHz: 0.05 dBi; 5.725-5.85 GHz: 0.05 dBi. Modular Approval. Output power is conducted. This device supports 802.11n/ac bandwidths of 20MHz and 40MHz in the 2.4GHz band and 20MHz, 40MHz, and 80MHz in the 5.8 GHz band. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation as performed in this filing. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II Permissive Change for adding one new portable host platform (Model: Lenovo ThinkBook 14-IML, 20RV; Brand: Lenovo) with reduced power as described in this filing. Main/TX1 Antenna; Type: PIFA; Manufacturer: Wistron Neweb Corp.; Parts Number: DQ6615G4800 (81EAA615.G48): 2.4 GHz: 0.93 dBi; 5.15-5.35 GHz: 1.68 dBi; 5.47-5.725 GHz: 1.33 dBi; 5.725-5.85 GHz: 1.35 dBi. Aux/TX2 Antenna; Type: PIFA; Manufacturer: Wistron Neweb Corp.; Parts Number: DQ6615G4800 (81EAA615.G48): 2.4 GHz: 0.69 dBi; 5.15-5.35 GHz: 1.52 dBi; 5.47-5.725 GHz: 1.54 dBi; 5.725-5.85 GHz: 1.86 dBi. Class II permissive change filing for new version chip change, show compliance with New U-NII-3 rule per FCC ET docket No. 13-49 and add 5 mm modular SAR by reduced power as documented in this filing. Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value is <0.10 W/Kg.
variousClass II Permissive Change for adding one new portable host platform (Model: Lenovo ThinkBook 14-IML, 20RV; Brand: Lenovo) with reduced power as described in this filing. The highest reported SAR value for Laptop PC Mode exposure condition is 0.16 W/kg. Main/TX1 Antenna; Type: PIFA; Manufacturer: Wistron Neweb Corp.; Parts Number: DQ6615G4800 (81EAA615.G48): 2.4 GHz: 0.93 dBi; 5.15-5.35 GHz: 1.68 dBi; 5.47-5.725 GHz: 1.33 dBi; 5.725-5.85 GHz: 1.35 dBi. Aux/TX2 Antenna; Type: PIFA; Manufacturer: Wistron Neweb Corp.; Parts Number: DQ6615G4800 (81EAA615.G48): 2.4 GHz: 0.69 dBi; 5.15-5.35 GHz: 1.52 dBi; 5.47-5.725 GHz: 1.54 dBi; 5.725-5.85 GHz: 1.86 dBi. Class II permissive change filing for new version chip change, show compliance with New U-NII-3 rule per FCC ET docket No. 13-49 and add 5 mm modular SAR by reduced power as documented in this filing. Modular Approval. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value is 0.71 W/Kg.
variousClass II Permissive Change for adding one new portable host platform (Model: Lenovo ThinkBook 14-IML, 20RV; Brand: Lenovo) with reduced power as described in this filing. The highest reported SAR value for Laptop PC Mode exposure condition is 0.29 W/kg. Main/TX1 Antenna; Type: PIFA; Manufacturer: Wistron Neweb Corp.; Parts Number: DQ6615G4800 (81EAA615.G48): 2.4 GHz: 0.93 dBi; 5.15-5.35 GHz: 1.68 dBi; 5.47-5.725 GHz: 1.33 dBi; 5.725-5.85 GHz: 1.35 dBi. Aux/TX2 Antenna; Type: PIFA; Manufacturer: Wistron Neweb Corp.; Parts Number: DQ6615G4800 (81EAA615.G48): 2.4 GHz: 0.69 dBi; 5.15-5.35 GHz: 1.52 dBi; 5.47-5.725 GHz: 1.54 dBi; 5.725-5.85 GHz: 1.86 dBi. Modular Approval. Output power is conducted. This device supports 802.11n/ac bandwidths of 20MHz and 40MHz in the 2.4GHz band and 20MHz, 40MHz, and 80MHz in the 5.8 GHz band. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation as performed in this filing. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II Permissive Change for adding one new portable host platform (Model: Lenovo ThinkBook 15-IML, 20RW; Brand: Lenovo) with reduced power as described in this filing. The highest reported SAR value for Laptop PC Mode exposure condition is 0.55 W/kg. TX1 Antenna; Type: PIFA; Manufacturer: Wistron Neweb Corp.; Parts Number: DQ6615G5000 (81EAA615.G50): 2.4 GHz: 0.68 dBi; 5.15-5.35 GHz: 0.46 dBi; 5.47-5.725 GHz: 0.79 dBi; 5.725-5.85 GHz: 0.79 dBi. TX2 Antenna; Type: PIFA; Manufacturer: Wistron Neweb Corp.; Parts Number: DQ6615G5000 (81EAA615.G50): 2.4 GHz: 0.60 dBi; 5.15-5.35 GHz: -1.35 dBi; 5.47-5.725 GHz: 0.05 dBi; 5.725-5.85 GHz: 0.05 dBi. Class II permissive change filing for new version chip change, show compliance with New U-NII-3 rule per FCC ET docket No. 13-49 and add 5 mm modular SAR by reduced power as documented in this filing. Modular Approval. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value is 0.71 W/Kg.
variousClass II Permissive Change to allow use in portable host Lenovo IdeaPad S540-13API. Output power is reduced from the values listed on the grant as detailed in the filing. Output power listed is maximum conducted. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.14 W/Kg and 1.48 W/Kg respectively.
variousClass II Permissive Change to allow use in portable host Lenovo IdeaPad S540-13API. Output power is reduced from the values listed on the grant as detailed in the filing. Output power listed is maximum conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. Installation in portable devices is limited to the display section of a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for this filing is 0.68 W/kg. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.24 W/Kg and 1.54 W/Kg respectively.
variousClass II Permissive Change to allow use in portable host Lenovo IdeaPad S540-13API. Output power is reduced from the values listed on the grant as detailed in the filing. Output power listed is maximum conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. Installation in portable devices is limited to a laptop or notebook PC where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 1cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous conditions in this filing are 1.18 W/kg and 1.18 W/kg, respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 1.40 W/Kg and 1.48 W/Kg respectively.
variousClass II permissive change filing to add new host DELL P31T Portable Computer with new antenna and reduced power as documented in this filing. The highest reported SAR values for body and simultaneous transmission conditions are <0.1 W/kg and 1.17 W/kg respectively. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 0.41 W/kg and 1.24 W/kg respectively. Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change filing to add new host DELL P31T Portable Computer with new antenna and reduced power as documented in this filing. The highest reported SAR values is 1.16 W/kg. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.38 W/kg and 1.19 W/kg respectively. Modular Approval. Output power is conducted. This device supports This device supports 20 and 40 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change filing to add new host DELL P31T Portable Computer with new antenna and reduced power as documented in this filing. The highest reported SAR values for body and simultaneous transmission conditions are 1.15 W/kg and 1.17 W/kg respectively. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.30 W/kg and 1.31 W/kg respectively. Modular Approval. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Lenovo Legion Y540-17IRH / Legion Y540-17IRH-PG0) and antennas as described in this filing. Maximum power ratings declared for this host are reduced from those detailed in the original filing for all operating modes. Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous transmission conditions in this filing under this FCC ID are <0.10 W/kg and 0.55 W/kg, respectively. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 0.41 W/kg and 1.24 W/kg, respectively.
variousClass II permissive change to add the specific portable host (Lenovo Legion Y540-17IRH / Legion Y540-17IRH-PG0 ) and antennas as described in this filing. Maximum power ratings declared for this host are reduced from those detailed in the original filing for all operating modes. Modular Approval. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous transmission conditions in this filing under this FCC ID are 0.51 W/kg and 0.55 W/kg, respectively. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.30 W/kg and 1.31 W/kg, respectively.
variousClass II permissive change to add the specific portable host (Lenovo Legion Y540-17IRH / Legion Y540-17IRH-PG0) and antennas as described in this filing. Maximum power ratings declared for this host are reduced from those detailed in the original filing for all operating modes. Modular Approval. Output power is conducted. This device supports 802.11n/ac bandwidths of 20MHz and 40MHz in the 2412-2462 MHz band. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation as performed in this filing. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body transmission condition in this filing under this FCC ID is 0.52W/kg. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.38 W/kg and 1.19 W/kg, respectively.
variousClass II permissive change filing to add new host DELL P93G Portable Computer with new antenna and reduced power as documented in this filing. The highest reported SAR values for body and simultaneous transmission conditions are <0.1 W/kg and 0.88 W/kg respectively. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 0.41 W/kg and 1.24 W/kg respectively. Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change filing to add new host DELL P93G Portable Computer with new antenna and reduced power as documented in this filing. The highest reported SAR values for body and simultaneous transmission conditions are 0.86 W/kg and 0.88 W/kg respectively. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.30 W/kg and 1.31 W/kg respectively. Modular Approval. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change filing to add new host DELL P93G Portable Computer with new antenna and reduced power as documented in this filing. The highest reported SAR values is 0.93 W/kg. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.38 W/kg and 1.19 W/kg respectively. Modular Approval. Output power is conducted. This device supports This device supports 20 and 40 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host ( Lenovo IdeaPad C340-14IWL,81N4/ Lenovo IdeaPad FLEX-14IWL,81SQ/ Lenovo IdeaPad C340-14API,81N6/ Lenovo IdeaPad FLEX-14API,81SS) and antennas as described in this filing. Maximum power ratings declared for this host are reduced from those detailed in the original filing for all operating modes. Modular Approval. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value for body in this filing under this FCC ID is 0.57 W/kg. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.30 W/kg and 1.31 W/kg, respectively.
variousClass II permissive change to add the specific portable host (Lenovo IdeaPad C340-14IWL,81N4/ Lenovo IdeaPad FLEX-14IWL,81SQ/ Lenovo IdeaPad C340-14API,81N6/ Lenovo IdeaPad FLEX-14API,81SS) and antennas as described in this filing. Maximum power ratings declared for this host are reduced from those detailed in the original filing for all operating modes. Modular Approval. Output power is conducted. This device supports 802.11n/ac bandwidths of 20MHz and 40MHz in the 2412-2462 MHz band. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation as performed in this filing. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value for body transmission condition in this filing under this FCC ID is 0.92W/kg. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.38 W/kg and 1.19 W/kg, respectively.
variousClass II permissive change to add the specific portable host (Lenovo IdeaPad C340-14IWL,81N4/ Lenovo IdeaPad FLEX-14IWL,81SQ/ Lenovo IdeaPad C340-14API,81N6/ Lenovo IdeaPad FLEX-14API,81SS) and antennas as described in this filing. Maximum power ratings declared for this host are reduced from those detailed in the original filing for all operating modes. Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 0.41 W/kg and 1.24 W/kg, respectively.
variousClass II permissive change to add the specific portable host ( Lenovo IdeaPad C340-15IWL, 81N5, Lenovo IdeaPad FLEX-15IWL, 81SR) and antenna with power reduction as described in this filing. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 0.41 W/kg and 1.24 W/kg respectively. Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Lenovo IdeaPad C340-15IWL, 81N5, Lenovo IdeaPad FLEX-15IWL, 81SR) and antenna with power reduction as described in this filing. The highest reported SAR values for body and simultaneous transmission conditions under this filing are 0.73 W/Kg and 0.90 W/kg respectively. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.30 W/kg and 1.31 W/kg respectively. Modular Approval. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Lenovo IdeaPad C340-15IWL, 81N5, Lenovo IdeaPad FLEX-15IWL, 81SR) and antenna with power reduction as described in this filing. The highest reported SAR values for body and simultaneous transmission conditions under this filing are 0.69 W/Kg and 0.86 W/kg respectively. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.38 W/kg and 1.19 W/kg respectively. Modular Approval. Output power is conducted. This device supports This device supports 20 and 40 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Lenovo IdeaPad S540-14IWL, 81ND, Lenovo IdeaPad S540-14IWL Touch, 81QX, Lenovo IdeaPad S540-14API, 81NH) and antenna with power reduction as described in this filing. The highest reported SAR values for body and simultaneous transmission conditions under this filing are 0.99 W/Kg and 1.01 W/kg respectively. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.30 W/kg and 1.31 W/kg respectively. Modular Approval. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Lenovo IdeaPad S540-14IWL, 81ND, Lenovo IdeaPad S540-14IWL Touch, 81QX, Lenovo IdeaPad S540-14API, 81NH) and antenna with power reduction as described in this filing. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 0.41 W/kg and 1.24 W/kg respectively. Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Lenovo IdeaPad S540-14IWL, 81ND, Lenovo IdeaPad S540-14IWL Touch, 81QX, Lenovo IdeaPad S540-14API, 81NH) and antenna with power reduction as described in this filing. The highest reported SAR values for body and simultaneous transmission conditions under this filing are 1.01 W/Kg and 1.03 W/kg respectively. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.38 W/kg and 1.19 W/kg respectively. Modular Approval. Output power is conducted. This device supports This device supports 20 and 40 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Lenovo IdeaPad S340-14IWL/Lenovo IdeaPad S340-14API) and antennas as described in this filing. Maximum power ratings declared for this host are reduced from those detailed in the original filing for all operating modes. Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous transmission conditions in this filing under this FCC ID are <0.10 W/kg and 0.98 W/kg, respectively. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 0.41 W/kg and 1.24 W/kg, respectively.
variousClass II permissive change to add the specific portable host (Lenovo IdeaPad S340-14IWL/Lenovo IdeaPad S340-14API) and antennas as described in this filing. Maximum power ratings declared for this host are reduced from those detailed in the original filing for all operating modes. Modular Approval. Output power is conducted. This device supports 802.11n/ac bandwidths of 20MHz and 40MHz in the 2412-2462 MHz band. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation as performed in this filing. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body transmission condition in this filing under this FCC ID is 0.41W/kg. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.38 W/kg and 1.19 W/kg, respectively.
variousClass II permissive change to add the specific portable host (Lenovo IdeaPad S340-14IWL/Lenovo IdeaPad S340-14API) and antennas as described in this filing. Maximum power ratings declared for this host are reduced from those detailed in the original filing for all operating modes. Modular Approval. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous transmission conditions in this filing under this FCC ID are 0.94 W/kg and 0.98 W/kg, respectively. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.30 W/kg and 1.31 W/kg, respectively.
variousClass II permissive change to add the specific portable host (Lenovo IdeaPad S340-15IWL/Lenovo IdeaPad S340-15IWLTouch/Lenovo IdeaPad S340-15API/Lenovo IdeaPad S340-15APITouch/ Lenovo IdeaPad S34015IMU) and antennas as described in this filing. Maximum power ratings declared for this host are reduced from those detailed in the original filing for all operating modes. Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous transmission conditions in this filing under this FCC ID are <0.10 W/kg and 0.55 W/kg, respectively. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 0.41 W/kg and 1.24 W/kg, respectively.
variousClass II permissive change to add the specific portable host (Lenovo IdeaPad S340-15IWL/Lenovo IdeaPad S340-15IWLTouch/Lenovo IdeaPad S340-15API/Lenovo IdeaPad S340-15APITouch/ Lenovo IdeaPad S34015IMU) and antennas as described in this filing. Maximum power ratings declared for this host are reduced from those detailed in the original filing for all operating modes. Modular Approval. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous transmission conditions in this filing under this FCC ID are 0.53 W/kg and 0.55 W/kg, respectively. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.30 W/kg and 1.31 W/kg, respectively.
variousClass II permissive change to add the specific portable host (Lenovo IdeaPad S340-15IWL/Lenovo IdeaPad S340-15IWLTouch/Lenovo IdeaPad S340-15API/Lenovo IdeaPad S340-15APITouch/ Lenovo IdeaPad S34015IMU) and antennas as described in this filing. Maximum power ratings declared for this host are reduced from those detailed in the original filing for all operating modes. Modular Approval. Output power is conducted. This device supports 802.11n/ac bandwidths of 20MHz and 40MHz in the 2412-2462 MHz band. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation as performed in this filing. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body transmission condition in this filing under this FCC ID is 0.26W/kg. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.38 W/kg and 1.19 W/kg, respectively.
variousClass II permissive change to add the specific portable host (Dell Model P92G) and antennas as described in this filing. Maximum power ratings declared for this host are reduced from those detailed in the original filing for all operating modes. Modular Approval. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous transmission conditions in this filing under this FCC ID are 1.03 W/kg and 1.05 W/kg, respectively. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.30 W/kg and 1.31 W/kg, respectively.
variousClass II permissive change to add the specific portable host (Dell Model P92G) and antennas as described in this filing. Maximum power ratings declared for this host are reduced from those detailed in the original filing for all operating modes. Modular Approval. Output power is conducted. This device supports 802.11n/ac bandwidths of 20MHz and 40MHz in the 2412-2462 MHz band. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation as performed in this filing. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body transmission condition in this filing under this FCC ID is 0.50W/kg. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.38 W/kg and 1.19 W/kg, respectively.
variousClass II permissive change to add the specific portable host (Dell Model P92G) and antennas as described in this filing. Maximum power ratings declared for this host are reduced from those detailed in the original filing for all operating modes. Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous transmission conditions in this filing under this FCC ID are <0.10 W/kg and 1.05 W/kg, respectively. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 0.41 W/kg and 1.24 W/kg, respectively.
variousClass II permissive change filing to add new host DELL P77F Portable Computer with new antenna and reduced power as documented in this filing. The highest reported SAR values for body and simultaneous transmission conditions are <0.1 W/kg and 0.87 W/kg respectively. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 0.41 W/kg and 1.24 W/kg respectively. Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Dell Portable Computer, P92G) and antenna with power reduction as described in this filing. The highest reported SAR value is 0.74 W/Kg. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.30 W/kg and 1.31 W/kg respectively. Modular Approval. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Dell Portable Computer, P92G) and antenna with power reduction as described in this filing. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 0.41 W/kg and 1.24 W/kg respectively. Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change filing to add new host DELL P77F Portable Computer with new antenna and reduced power as documented in this filing. The highest reported SAR values for body and simultaneous transmission conditions are 0.86 W/kg and 0.87 W/kg respectively. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.30 W/kg and 1.31 W/kg respectively. Modular Approval. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Dell Portable Computer, P92G) and antenna with power reduction as described in this filing. The highest reported SAR value under this filing is 0.37 W/Kg. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.38 W/kg and 1.19 W/kg respectively. Modular Approval. Output power is conducted. This device supports This device supports 20 and 40 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change filing to add new host DELL P77F Portable Computer with new antenna and reduced power as documented in this filing. The highest reported SAR values is 0.19 W/kg. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.38 W/kg and 1.19 W/kg respectively. Modular Approval. Output power is conducted. This device supports This device supports 20 and 40 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change filing to add new host Lenovo ideapad S530-13IWL Portable Computer with new antenna and reduced power as documented in this filing. The highest reported stand-alone SAR values is 0.93 W/kg. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.30 W/kg and 1.31 W/kg respectively. Modular Approval. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value is 0.71 W/Kg.
variousClass II permissive change filing to add new host Lenovo ideapad S530-13IWL Portable Computer with new antenna and reduced power as documented in this filing. The highest reported stand-alone SAR value is 0.49 W/kg. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.38 W/kg and 1.19 W/kg respectively. Modular Approval. Output power is conducted. This device supports 802.11n/ac bandwidths of 20MHz and 40MHz in the 2.4GHz band This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation as performed in this filing. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change filing to add new host Lenovo ideapad S530-13IWL Portable Computer with new antenna and reduced power as documented in this filing. The highest reported stand-alone SAR values is <0.1 W/kg. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 0.41 W/kg and 1.24 W/kg respectively. Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value is <0.10 W/Kg.
variousClass II permissive change to add the specific portable host (Dell Model P77F ) and antenna as described in this filing. Modular Approval. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous transmission conditions in this filing under this FCC ID are 1.10 W/kg and 1.12 W/kg, respectively. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.30 W/kg and 1.31 W/kg respectively.
variousGrant Conditions: Class II permissive change to add the specific portable host (Dell Model P77F) and antenna as described in this filing. Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous transmission conditions in this filing under this FCC ID are <0.10 W/kg and 1.12 W/kg, respectively. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 0.41 W/kg and 1.24 W/kg, respectively.
variousClass II permissive change to add the specific portable host (Dell Model P77F) and antenna as described in this filing. Modular Approval. Output power is conducted. This device supports 802.11n/ac bandwidths of 20MHz and 40MHz in the 2412-2462 MHz band. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation as performed in this filing. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body transmission condition in this filing under this FCC ID is 0.46 W/kg. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.38 W/kg and 1.19 W/kg respectively.
variousClass II permissive change filing to add new host Dell P93G Portable Computer with new antenna and reduced power as documented in this filing. The highest reported SAR values for body and simultaneous transmission conditions are <0.1 W/kg and 0.73 W/kg respectively. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 0.41 W/kg and 1.24 W/kg respectively. Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value is <0.10 W/Kg.
variousClass II permissive change filing to add new host Dell P93G Portable Computer with new antenna and reduced power as documented in this filing. The highest reported SAR values for body and simultaneous transmission conditions are 0.71 W/kg and 0.73 W/kg respectively. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.30 W/kg and 1.31 W/kg respectively. Modular Approval. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value is 0.71 W/Kg.
variousClass II permissive change filing to add new host Dell P93G Portable Computer with new antenna and reduced power as documented in this filing. The highest reported SAR value is 0.93 W/kg respectively. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.38 W/kg and 1.19 W/kg respectively. Modular Approval. Output power is conducted. This device supports 802.11n/ac bandwidths of 20MHz and 40MHz in the 2.4GHz band. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation as performed in this filing. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host ( Lenovo Yoga S730-13IWL, Lenovo ideapad 730S-13IWL ) and antenna as described in this filing. Modular Approval. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous transmission conditions in this filing under this FCC ID are 1.11 W/kg and 1.15 W/kg respectively. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.30 W/kg and 1.31 W/kg respectively.
variousClass II permissive change to add the specific portable host (Lenovo Yoga S730-13IWL, Lenovo ideapad 730S-13IWL) and antenna as described in this filing. Modular Approval. Output power is conducted. This device supports 802.11n/ac bandwidths of 20MHz and 40MHz in the 2412-2462 MHz band. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation as performed in this filing. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body transmission condition in this filing under this FCC ID is 0.67 W/kg. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.19 W/kg and 1.19 W/kg respectively.
variousClass II permissive change to add the specific portable host (Lenovo Yoga S730-13IWL, Lenovo ideapad 730S-13IWL) and antenna as described in this filing. Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value for body transmission condition in this filing under this FCC ID is <0.10 W/kg. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 0.41 W/kg and 1.24 W/kg respectively.
variousClass II permissive change filing to add new host Lenovo ideapad 130S-14IGM;81KU Portable Computer with new antenna and reduced power as documented in this filing. The highest reported SAR values for body and simultaneous transmission conditions are <0.1 W/kg and 1.24 W/kg respectively. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 0.41 W/kg and 1.24 W/kg respectively. Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change filing to add new host Lenovo ideapad 130S-11IGM;81KT Portable Computer with new antenna and reduced power as documented in this filing. The highest reported SAR values for body and simultaneous transmission conditions are 1.18 W/kg and 1.22 W/kg respectively. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.30 W/kg and 1.31 W/kg respectively. Modular Approval. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change filing to add new host Lenovo ideapad 130S-14IGM;81KU Portable Computer with new antenna and reduced power as documented in this filing. The highest reported SAR values for body and simultaneous transmission conditions are 1.20 W/kg and 1.24 W/kg respectively. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.30 W/kg and 1.31 W/kg respectively. Modular Approval. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change filing to add new host Lenovo ideapad 130S-11IGM;81KT Portable Computer with new antenna and reduced power as documented in this filing. The highest reported SAR values for body and simultaneous transmission conditions are 0.56 W/kg and 0.60 W/kg respectively. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.38 W/kg and 1.19 W/kg respectively. Modular Approval. Output power is conducted. This device supports This device supports 20 and 40 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change filing to add new host Lenovo ideapad 130S-14IGM;81KU Portable Computer with new antenna and reduced power as documented in this filing. The highest reported SAR values for body and simultaneous transmission conditions are 0.37 W/kg and 0.37 W/kg respectively. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.38 W/kg and 1.19 W/kg respectively. Modular Approval. Output power is conducted. This device supports This device supports 20 and 40 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change filing to add new host Lenovo ideapad 130S-11IGM;81KT Portable Computer with new antenna and reduced power as documented in this filing. The highest reported SAR values for body and simultaneous transmission conditions are <0.1 W/kg and 1.22 W/kg respectively. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 0.41 W/kg and 1.24 W/kg respectively. Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Lenovo Legion Y7000P, Lenovo Legion Y7000P-1060) with new antenna models as described in this filing. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.30 W/kg and 1.31 W/kg respectively. Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Lenovo Legion Y7000P, Lenovo Legion Y7000P-1060) with new antenna models as described in this filing. The highest reported SAR values for stand-alone exposure condition is: 1.08 W/kg. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.30 W/kg and 1.31 W/kg respectively. Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Lenovo Legion Y7000P, Lenovo Legion Y7000P-1060) with new antenna models as described in this filing. The highest reported SAR values for body and simultaneous transmission conditions are 1.13 W/kg and 1.13 W/kg respectively. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.30 W/kg and 1.31 W/kg respectively. Modular Approval. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (DELL Portable Computer, P88G and P88G001) and antenna with power reduction as described in this filing. The highest reported SAR value is 0.87 W/Kg. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.30 W/kg and 1.31 W/kg respectively. Modular Approval. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (DELL Portable Computer, P88G and P88G001) and antenna with power reduction as described in this filing. The highest reported SAR value under this filing is 0.46 W/Kg. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.38 W/kg and 1.19 W/kg respectively. Modular Approval. Output power is conducted. This device supports This device supports 20 and 40 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (DELL Portable Computer, P88G and P88G001) and antenna with power reduction as described in this filing. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 0.41 W/kg and 1.24 W/kg respectively. Modular Approval. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (DELL Portable Computer, P87G and P87G001) and antenna with power reduction as described in this filing. The highest reported SAR value under this filing is 0.33 W/Kg. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.38 W/kg and 1.19 W/kg respectively. Modular Approval. Output power is conducted. This device supports This device supports 20 and 40 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (DELL Portable Computer, P87G and P87G001) and antenna with power reduction as described in this filing. The highest reported SAR value is 0.75 W/Kg. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.30 W/kg and 1.31 W/kg respectively. Modular Approval. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (DELL Portable Computer, P87G and P87G001) and antenna with power reduction as described in this filing. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 0.41 W/kg and 1.24 W/kg respectively. Modular Approval. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the new antenna type (Dipole) for use in mobile RF exposure category configuration as described in this filing. Modular Approval. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the new antenna type (Dipole) for use in mobile RF exposure category configuration as described in this filing. Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the new antenna type (Dipole) for use in mobile RF exposure category configuration as described in this filing. Modular Approval. Output power is conducted. This device supports This device supports 20 and 40 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Lenovo Legion Y530-15ICH) with new antenna models as described in this filing. Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Lenovo Legion Y530-15ICH) with new antenna models as described in this filing. The highest reported SAR values for body adjacent condition in this filing is 0.78 W/kg. Modular Approval. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Lenovo Legion Y530-15ICH) with new antenna models as described in this filing. The highest reported SAR values for body adjacent condition in this filing is 1.38 W/kg. Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Lenovo ideapad 330S-15IKB GTX1050; 81GC) and antenna as described in this filing. Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous transmission conditions in this filings under this FCC ID are <0.10 W/kg and 0.46 W/kg respectively. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 0.41 W/kg and 1.24 W/kg respectively.
variousClass II permissive change to add the specific portable host (Lenovo ideapad 330S-15IKB GTX1050; 81GC) and antenna as described in this filing. Modular Approval. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous transmission conditions in this filings under this FCC ID are 0.36 W/kg and 0.46 W/kg respectively. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.30 W/kg and 1.31 W/kg respectively.
variousClass II permissive change to add the specific portable host (Lenovo ideapad 330S-15IKB GTX1050; 81GC) and antenna as described in this filing. Modular Approval. Output power is conducted. This device supports 802.11n/ac bandwidths of 20MHz and 40MHz in the 2412-2462 MHz band. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation as performed in this filing. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous transmission conditions in this filings under this FCC ID are 0.28 W/kg and 0.31 W/kg respectively. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.19 W/kg and 1.19 W/kg respectively.
variousClass II permissive change to add the specific portable host (Lenovo ideapad FLEX 6-14IKB, Lenovo ideapad FLEX 6-14ARR) with new antenna models as described in this filing. The highest reported SAR value is 1.27 W/Kg. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.30 W/kg and 1.31 W/kg respectively. Modular Approval. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Lenovo ideapad FLEX 6-14IKB, Lenovo ideapad FLEX 6-14ARR) with new antenna models as described in this filing. The highest reported SAR value is 0.88 W/Kg. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.19 W/kg and 1.19 W/kg respectively. Modular Approval. Output power is conducted. This device supports This device supports 20 and 40 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Lenovo ideapad FLEX 6-14IKB, Lenovo ideapad FLEX 6-14ARR) with new antenna models as described in this filing. Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Lenovo ideapad 530S-14IKB; Lenovo ideapad 530S-14ARR) with new antenna models as described in this filing. The highest reported SAR value for body-worn accessory and simultaneous transmission exposure conditions are 0.72 W/Kg and 0.80 W/Kg respectively. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.30 W/kg and 1.31 W/kg respectively. Modular Approval. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Lenovo ideapad 530S-14IKB; Lenovo ideapad 530S-14ARR) with new antenna models as described in this filing. The highest reported SAR value is 0.41 W/Kg. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.19 W/kg and 1.19 W/kg respectively. Modular Approval. Output power is conducted. This device supports This device supports 20 and 40 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Lenovo ideapad 530S-14IKB; Lenovo ideapad 530S-14ARR) with new antenna models as described in this filing. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 0.41 W/kg and 1.24 W/kg respectively. Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Lenovo V530s-14IKB;81EX) with new antenna models as described in this filing. The highest reported SAR values for body adjacent and simultaneous transmission conditions in this filing are 1.07 W/kg and 1.04 W/kg respectively. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.19 W/kg and 1.19 W/kg respectively. Output power is conducted. This device supports 802.11n/ac bandwidths of 20MHz and 40MHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Lenovo V530s-14IKB;81EX) with new antenna models as described in this filing. The highest reported SAR values for body adjacent and simultaneous transmission conditions in this filing are 0.14 W/kg and 1.04 W/kg respectively. The highest reported SAR values for body adjacent and simultaneous transmission conditions across all filings under this FCC ID are 0.41 W/kg and 1.24 W/kg respectively. Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Lenovo V530s-14IKB;81EX) with new antenna models as described in this filing. The highest reported SAR values for body adjacent and simultaneous transmission conditions in this filing are 1.15 W/kg and 1.07 W/kg respectively. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.19 W/kg and 1.19 W/kg respectively. Modular Approval. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add portable host Lenovo notebook PC (Lenovo ideapad 530S-15IKB) with new antenna and reduced power as documented in this filing. The highest reported SAR value is 0.59 W/kg. Modular Approval. Output power is conducted. This device supports 802.11n/ac bandwidths of 20MHz and 40MHz in the 2412-2462 MHz band. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation as performed in this filing. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.19 W/kg and 1.19 W/kg respectively.
variousClass II permissive change to add portable host Lenovo notebook PC (Lenovo ideapad 530S-15IKB) with new antenna and reduced power as documented in this filing. Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value across all filings is 0.41 W/kg.
variousClass II permissive change to add portable host Lenovo notebook PC (Lenovo ideapad 530S-15IKB) with new antenna and reduced power as documented in this filing. The highest reported SAR value is 0.73 W/Kg. Modular Approval. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.19 W/kg and 1.19 W/kg respectively.
variousClass II permissive change to add the specific portable host (Lenovo TP00095A) and antenna as described in this filing. Modular Approval. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value for body condition in this filing is 1.19 W/kg. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.19 W/kg and 1.19 W/kg respectively.
variousClass II permissive change to add the specific portable host (Lenovo TP00095A) and antenna as described in this filing. Modular Approval. Output power is conducted. This device supports 802.11n/ac bandwidths of 20MHz and 40MHz in the 2412-2462 MHz band. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation as performed in this filing. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value for body in this filing is 0.71 W/kg. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.19 W/kg and 1.19 W/kg respectively.
variousClass II permissive change to add the specific portable host (Lenovo TP00095A) and antenna as described in this filing. Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value across all filings is 0.41 W/kg.
variousClass II permissive change to add the specific portable host (Lenovo TP00094A) and antenna as described in this filing. Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value across all filings is 0.41 W/kg.
variousClass II permissive change to add the specific portable host (Lenovo TP00094A) and antenna as described in this filing. Modular Approval. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value for body SAR in this filing is 1.19 W/kg. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.19 W/kg and 1.19 W/kg respectively.
variousClass II permissive change to add the specific portable host (Lenovo TP00094A) and antenna as described in this filing. Modular Approval. Output power is conducted. This device supports 802.11n/ac bandwidths of 20MHz and 40MHz in the 2412-2462 MHz band. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation as performed in this filing. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value for body SAR in this filing is 0.86 W/kg. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.19 W/kg and 1.19 W/kg respectively.
variousClass II permissive change to add the specific portable host (Lenovo ideapad 330S-14IKB; 81F4; Lenovo ideapad 330S-14AST; 81F8) and antenna as described in this filing. Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous transmission conditions in this filing are <0.10 W/kg and 0.77 W/kg. The highest reported SAR value across all filings is 0.41 W/kg.
variousClass II permissive change to add the specific portable host (Lenovo ideapad 330S-14IKB; 81F4; Lenovo ideapad 330S-14AST; 81F8) and antenna as described in this filing. Modular Approval. Output power is conducted. This device supports 802.11n/ac bandwidths of 20MHz and 40MHz in the 2412-2462 MHz band. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation as performed in this filing. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous transmission conditions in this filing are 0.35 W/kg and 0.38 W/kg. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.19 W/kg and 1.19 W/kg respectively.
variousClass II permissive change to add the specific portable host (Lenovo ideapad 330S-14IKB; 81F4; Lenovo ideapad 330S-14AST; 81F8) and antenna as described in this filing. Modular Approval. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous transmission conditions in this filing are 0.74 W/kg and 0.77 W/kg The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.19 W/kg and 1.19 W/kg respectively.
variousClass II permissive change to add the specific portable host (Dell P69G) with new antenna models as described in this filing. The highest reported SAR value for body-worn accessory and simultaneous transmission exposure conditions are < 0.1 W/Kg and 1.01 W/Kg respectively. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 0.41 W/kg and 1.24 W/kg respectively. Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Dell P69G) with new antenna models as described in this filing. The highest reported SAR value is 0.88 W/Kg. The highest reported SAR value across all filings under this FCC ID is 1.19 W/kg respectively. Modular Approval. Output power is conducted. This device supports This device supports 20 and 40 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Dell P69G) with new antenna models as described in this filing. The highest reported SAR value for body-worn accessory and simultaneous transmission exposure conditions are 0.99 W/Kg and 1.01 W/Kg respectively. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.30 W/kg and 1.31 W/kg respectively. Modular Approval. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Lenovo ideapad 330S-15IKB, 81F5; Lenovo ideapad 330S-15AST, 81F9; Lenovo ideapad 330S-15ARR, 81FB) with new antenna models as described in this filing. The highest reported SAR value for body-worn accessory and simultaneous transmission exposure conditions are 0.59 W/Kg and 0.75 W/Kg respectively. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.30 W/kg and 1.31 W/kg respectively. Modular Approval. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Lenovo ideapad 330S-15IKB, 81F5; Lenovo ideapad 330S-15AST, 81F9; Lenovo ideapad 330S-15ARR, 81FB) with new antenna models as described in this filing. The highest reported SAR value for body-worn accessory and simultaneous transmission exposure conditions are 0.46 W/Kg and 0.48 W/Kg respectively. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.19 W/kg and 1.19 W/kg respectively. Modular Approval. Output power is conducted. This device supports This device supports 20 and 40 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Lenovo ideapad 330S-15IKB, 81F5; Lenovo ideapad 330S-15AST, 81F9; Lenovo ideapad 330S-15ARR, 81FB) with new antenna models as described in this filing. The highest reported SAR value for body-worn accessory and simultaneous transmission exposure conditions are < 0.1 W/Kg and 0.75 W/Kg respectively. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 0.41 W/kg and 1.24 W/kg respectively. Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Dell P25T) with new antenna models as described in this filing. The highest reported SAR value is 0.80 W/Kg. Modular Approval. Output power is conducted. This device supports This device supports 20 and 40 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Dell P25T) with new antenna models as described in this filing. The highest reported SAR value for body-worn accessory and simultaneous transmission exposure conditions are 0.90 W/Kg and 0.93 W/Kg respectively. Modular Approval. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Dell P25T) with new antenna models as described in this filing. The highest reported SAR value for body-worn accessory and simultaneous transmission exposure conditions are < 0.1 W/Kg and 0.93 W/Kg respectively. Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Lenovo FLEX 6-11IGM,81A7) with new antenna model and reduced power as described in this filing. The highest reported SAR value for body-worn accessory and simultaneous transmission exposure conditions are < 0.1 W/Kg and 1.24 W/Kg respectively. Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Lenovo FLEX 6-11IGM,81A7) with new antenna model and reduced power as described in this filing. The highest reported SAR value of this filing is 1.16 W/Kg. Modular Approval. Output power is conducted. This device supports This device supports 20 and 40 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Lenovo FLEX 6-11IGM,81A7) with new antenna model and reduced power as described in this filing. The highest reported SAR value for body-worn accessory and simultaneous transmission exposure conditions are 1.21 W/Kg and 1.24 W/Kg respectively. Modular Approval. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host ( Lenovo ideapad 720S-15IKB; Lenovo ideapad 720S Touch-15IKB) and antenna as described in this filing. Modular Approval. Output power is conducted. This device supports 802.11n/ac bandwidths of 20MHz and 40MHz in the 2412-2462 MHz band. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation as performed in this filing. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value in this filing is 0.51 W/kg. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.19 W/kg and 1.19 W/kg respectively.
variousClass II permissive change to add the specific portable host (Lenovo ideapad 720S-15IKB; Lenovo ideapad 720S Touch-15IKB) and antenna as described in this filing. Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value across all filings is 0.41 W/kg.
variousClass II permissive change to add the specific portable host (Lenovo ideapad 720S-15IKB; Lenovo ideapad 720S Touch-15IKB) and antenna as described in this filing. Modular Approval. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value in this filing is 0.28 W/kg. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.19 W/kg and 1.19 W/kg respectively.
variousClass II permissive change to add the specific portable host ( Lenovo V330-15IKB; Lenovo V330-15ISK ) and antenna as described in this filing. Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value in this filing is <0.10 W/kg.
variousClass II permissive change to add the specific portable host (Lenovo V330-15IKB; Lenovo V330-15ISK ) and antenna as described in this filing. Modular Approval. Output power is conducted. This device supports 802.11n/ac bandwidths of 20MHz and 40MHz in the 2412-2462 MHz band. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation as performed in this filing. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value in this filing is 0.31 W/kg. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.19 W/kg and 1.19 W/kg respectively.
variousClass II permissive change to add the specific portable host (Lenovo V330-15IKB; Lenovo V330-15ISK) and antenna as described in this filing. Modular Approval. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous transmission conditions in this filing are 0.79 W/kg and 0.79 W/kg respectively. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.19 W/kg and 1.19 W/kg respectively.
variousClass II permissive change to add the specific portable host (Lenovo MIIX 520-12IKB;81CG;20M3;20M4) with new antenna model and reduced power as described in this filing. The highest reported SAR value of this filing is 0.28 W/Kg. Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Lenovo MIIX 520-12IKB;81CG;20M3;20M4) with new antenna model and reduced power as described in this filing. The highest reported SAR value of this filing is 1.20 W/Kg. Modular Approval. Output power is conducted. This device supports This device supports 20 and 40 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Lenovo MIIX 520-12IKB;81CG;20M3;20M4) with new antenna model and reduced power as described in this filing. The highest reported SAR value of this filing is 1.20 W/Kg. Modular Approval. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (ASUS TP401N, R460N, TP401C, R460C, J401N, J401C) with antennas described in this filing. Output power is conducted. This device supports bandwidths of 20MHz, 40MHz, and 80MHz in the 5 GHz bands. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0 cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value in this filing is 0.81 W/kg. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.30 W/kg and 1.31 W/kg respectively.
variousClass II permissive change to add the specific portable host (ASUS TP401N, R460N, TP401C, R460C, J401N, J401C) with antennas described in this filing. Output power is conducted. This device supports bandwidths of 20MHz and 40MHz in the 2412-2462 MHz band. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation as performed in this filing. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value in this filing is 1.14 W/kg. The highest reported SAR values for stand-alone and simultaneous transmission conditions across all filings under this FCC ID are 1.19 W/kg and 1.19 W/kg respectively.
variousClass II permissive change to add the specific portable host (ASUS TP401N, R460N, TP401C, R460C, J401N, J401C) with antennas described in this filing. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value in this filing is 0.15 W/kg. The highest reported SAR values for stand-alone and simultaneous transmission conditions across all filings under this FCC ID are 0.41 W/kg and 0.80 W/kg respectively.
variousClass II permissive change to add the specific portable host (Lenovo YOGA 720-12IKB) with new antenna model and reduced power as described in this filing. Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 0.16 W/kg and 0.80 W/kg respectively.
variousClass II permissive change to add the specific portable host (Lenovo YOGA 720-12IKB) with new antenna model and reduced power as described in this filing. The highest reported SAR value of this filing is 1.14 W/Kg. Output power is conducted. This device supports 802.11n/ac bandwidths of 20MHz and 40MHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.19 W/kg and 1.19 W/kg respectively.
variousClass II permissive change to add the specific portable host (Lenovo YOGA 720-12IKB) with new antenna model and reduced power as described in this filing. The highest reported SAR value of this filing is 1.18 W/Kg. Modular Approval. Output power is conducted. This device supports 802.11n/ac bandwidths of 20MHz and 40MHz in the 2.4GHz band and 20MHz, 40MHz, and 80MHz in the 5.8 GHz band. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0 cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.30 W/kg and 1.31 W/kg respectively.
variousClass II permissive change to add the specific portable host (Lenovo ideapad 320S-13IKB; 81AK) and antenna as described in this filing. Modular Approval. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value in this filing is 1.19 W/kg. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.19 W/kg and 1.19 W/kg respectively.
variousClass II permissive change to add the specific portable host (Lenovo ideapad 320S-13IKB; 81AK) and antenna as described in this filing. Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value in this filing is 0.41 W/kg.
variousClass II permissive change to add the specific portable host (Lenovo ideapad 320S-13IKB; 81AK) and antenna as described in this filing. Modular Approval. Output power is conducted. This device supports 802.11n/ac bandwidths of 20MHz and 40MHz in the 2412-2462 MHz band. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation as performed in this filing. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value in this filing is 0.99 W/kg. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.19 W/kg and 1.19 W/kg respectively.
variousClass II permissive change to add the specific portable host (Lenovo ideapad 120S-11IAP; 81A4) with new antenna model and reduced power as described in this filing. The highest reported SAR value of this filing is 0.70 W/Kg. Modular Approval. Output power is conducted. This device supports This device supports 20 and 40 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Lenovo ideapad 120S-11IAP; 81A4) with new antenna model and reduced power as described in this filing. The highest reported SAR value of this filing is 0.31 W/Kg. Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Lenovo ideapad 120S-11IAP; 81A4) with new antenna model and reduced power as described in this filing. The highest reported SAR value of this filing is 1.16 W/Kg. Modular Approval. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Lenovo ideapad 120S-14IAP; 81A5) with new antenna model and reduced power as described in this filing. The highest reported SAR value of this filing is 0.64 W/Kg. Modular Approval. Output power is conducted. This device supports This device supports 20 and 40 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Lenovo ideapad 120S-14IAP; 81A5) with new antenna model and reduced power as described in this filing. The highest reported SAR value of this filing is 1.15 W/Kg. Modular Approval. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Lenovo ideapad 120S-14IAP; 81A5) with new antenna model and reduced power as described in this filing. The highest reported SAR value of this filing is 0.24 W/Kg. Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Lenovo ideapad 720-15IKB) and antenna as described in this filing. Modular Approval. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value in this filing is 0.19 W/kg. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.19 W/kg and 1.19 W/kg respectively.
variousClass II permissive change to add the specific portable host (Lenovo ideapad 720-15IKB) and antenna as described in this filing. Modular Approval. Output power is conducted. This device supports 802.11n/ac bandwidths of 20MHz and 40MHz in the 2412-2462 MHz band. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation as performed in this filing. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value in this filing is 0.25 W/kg. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.19 W/kg and 1.19 W/kg respectively.
variousClass II permissive change to add the specific portable host (Lenovo ideapad 720-15IKB) and antenna as described in this filing. Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Lenovo ideapad 720S-13IKB, Lenovo ideapad 720S Touch-13IKB and Lenovo ideapad 720S-13ARR) and antenna as described in this filing. Modular Approval. Output power is conducted. This device supports 802.11n/ac bandwidths of 20MHz and 40MHz in the 2412-2462 MHz band. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation as performed in this filing. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value in this filing is 1.10 W/kg. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.19 W/kg and 1.19 W/kg respectively.
variousClass II permissive change to add the specific portable host (Lenovo ideapad 720S-13IKB, Lenovo ideapad 720S Touch-13IKB and Lenovo ideapad 720S-13ARR) and antenna as described in this filing. Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Lenovo ideapad 720S-13IKB, Lenovo ideapad 720S Touch-13IKB and Lenovo ideapad 720S-13ARR) and antenna as described in this filing. Modular Approval. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value in this filing is 0.76 W/kg. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.19 W/kg and 1.19 W/kg respectively.
variousClass II permissive change to add the specific portable host (Lenovo ideapad 520-15IKB) and antenna as described in this filing. Modular Approval. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value in this filing is 0.67 W/kg. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.19 W/kg and 1.19 W/kg respectively.
variousClass II permissive change to add the specific portable host (Lenovo ideapad 520-15IKB) and antenna as described in this filing. Modular Approval. Output power is conducted. This device supports 802.11n/ac bandwidths of 20MHz and 40MHz in the 2412-2462 MHz band. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation as performed in this filing. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value in this filing is 0.32 W/kg. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.19 W/kg and 1.19 W/kg respectively.
variousClass II permissive change to add the specific portable host (Lenovo ideapad 520-15IKB) and antenna as described in this filing. Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Lenovo ideapad 720S-14IKB) as documented. Modular Approval. Output power is conducted. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 0.16 W/kg and 0.80 W/kg respectively.
variousClass II permissive change to add the specific portable host (Lenovo ideapad 720S-14IKB) as documented. The highest reported SAR for body documented in this filing is 0.93 W/kg. Modular Approval. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.30 W/kg and 1.31 W/kg respectively.
variousClass II permissive change to add the specific portable host (Lenovo ideapad 720S-14IKB) as documented. The highest reported SAR for body documented in this filing is 0.70 W/kg. Modular Approval. Output power is conducted. This device supports 802.11n/ac bandwidths of 20MHz and 40MHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.19 W/kg and 1.19 W/kg respectively.
variousClass II permissive change to add the specific portable host (Lenovo YOGA 520-14IKB, Lenovo ideapad FLEX 5-1470) with power reduction implementation as documented. Modular Approval. Output power is conducted. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 0.16 W/kg and 0.80 W/kg respectively.
variousClass II permissive change to add the specific portable host (Lenovo YOGA 520-14IKB, Lenovo ideapad FLEX 5-1470) with power reduction implementation as documented. The highest reported SAR for body documented in this filing is 1.04 W/kg. Modular Approval. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.30 W/kg and 1.31 W/kg respectively.
variousClass II permissive change to add the specific portable host (Lenovo YOGA 520-14IKB, Lenovo ideapad FLEX 5-1470) with power reduction implementation as documented. The highest reported SAR for body documented in this filing is 0.232 W/kg. Modular Approval. Output power is conducted. This device supports 802.11n/ac bandwidths of 20MHz and 40MHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.19 W/kg and 1.19 W/kg respectively.
variousClass II permissive change to add the specific portable laptop/notebook/tablet host (Lenovo Y720-15IKB) to include simultaneous transmission as documented in this filing. Modular Approval. Output power is conducted. This device supports 802.11n/ac bandwidths of 20MHz and 40MHz in the 2.4GHz band and 20MHz, 40MHz, and 80MHz in the 5.8 GHz band. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value in this filing is 0.14 W/Kg. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 0.16 W/kg and 0.43 W/kg respectively.
variousClass II permissive change to add the specific portable laptop/notebook/tablet host (Lenovo Y720-15IKB. Modular Approval. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value is 0.38 W/Kg. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 0.42 W/kg and 0.43 W/kg respectively.
variousClass II permissive change to add the specific portable laptop/notebook/tablet host (Lenovo Y720-15IKB) to include simultaneous transmission as documented in this filing. Modular Approval. Output power is conducted.
variousClass II permissive change to add the specific portable laptop/notebook/tablet host (Lenovo TP00066D). Output power is conducted. This device supports 802.11n/ac bandwidths of 20MHz and 40MHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value in this filing is 0.74 W/kg. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.19 W/kg and 1.19 W/kg respectively.
variousClass II permissive change to add the specific portable laptop/notebook/tablet host (Lenovo TP00066D). Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 0.16 W/kg and 0.80 W/kg respectively.
variousClass II permissive change to add the specific portable laptop/notebook/tablet host (Lenovo TP00066D). Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR in this filing is 1.18 W/kg. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.30 W/kg and 1.31 W/kg respectively.
variousClass II permissive change to add the specific portable laptop/notebook/tablet host (Lenovo ideapad MIIX510-12IKB;80XE). Output power is conducted. This device supports 802.11n/ac bandwidths of 20MHz and 40MHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body in this filing is 1.15 W/kg. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.19 W/kg and 1.19 W/kg respectively.
variousClass II permissive change to add the specific portable laptop/notebook/tablet host (Lenovo ideapad MIIX510-12IKB;80XE). Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body in this filing is 1.29 W/kg. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.30 W/kg and 1.31 W/kg respectively.
variousClass II permissive change to add the specific portable laptop/notebook/tablet host (Lenovo ideapad MIIX510-12IKB;80XE). Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body in this filing is 0.16 W/kg. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 0.16 W/kg and 0.80 W/kg respectively.
variousClass II permissive change to add the specific portable laptop/notebook/tablet host (Acer N16W1). Output power is conducted. This device supports 802.11n/ac bandwidths of 20MHz and 40MHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body condition in this filing is 0.76 W/kg. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.19 W/kg and 1.19 W/kg respectively.
variousClass II permissive change to add the specific portable host (Acer N16W1). Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body condition in this filing is <0.10 W/kg. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are <0.10 W/kg and 0.80 W/kg respectively.
variousClass II permissive change to add the specific portable host (Acer N16W1). Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body condition is 0.58 W/kg. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.30 W/kg and 1.31 W/kg respectively.
variousClass II permissive change to add the specific portable laptop/notebook/tablet host (Acer N16W2). Output power is conducted. This device supports 802.11n/ac bandwidths of 20MHz and 40MHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body condition in this filing is 1.11 W/kg. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.19 W/kg and 1.19 W/kg respectively.
variousClass II permissive change to add the specific portable host (Acer N16W2). Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body condition is 1.13 W/kg. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.30 W/kg and 1.31 W/kg respectively.
variousClass II permissive change to add the specific portable host (Acer N16W2). Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body condition in this filing is <0.10 W/kg. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are <0.10 W/kg and 0.80 W/kg respectively.
variousClass II permissive change to add the specific portable host (Lenovo ideapad MIIX510-12ISK;80U1). Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body in this filing is 0.13 W/kg. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are <0.10 W/kg and 0.80 W/kg respectively.
variousClass II permissive change to add the specific portable host (Lenovo ideapad MIIX510-12ISK;80U1). Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body in this filing is 1.26 W/kg. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.30 W/kg and 1.31 W/kg respectively.
variousClass II permissive change to add the specific portable laptop/notebook/tablet host (Lenovo ideapad MIIX510-12ISK;80U1). Output power is conducted. This device supports 802.11n/ac bandwidths of 20MHz and 40MHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body in this filing is 1.11 W/kg. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.19 W/kg and 1.19 W/kg respectively.
variousClass II permissive change to add the specific portable laptop/notebook/tablet host (ASUSTeK TP201S, J201S, R210S) with power reduction implementation and antennas as documented.. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR fin this filing is 1.03 W/kg. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.30 W/kg and 1.31 W/kg respectively.
variousClass II permissive cange to add a new antenna in specific portable laptop/notebook/tablet host (ASUSTeK TP201S, J201S, R210S) with reduced power implementation and antennas as documented. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are <0.10 W/kg and 0.80 W/kg respectively.
variousClass II permissive change to add a new antenna in the specific portable laptop/notebook/tablet host (ASUSTeK TP201S, J201S, R210S) with reduced power implementation and antennas as documented. Output power is conducted. This device supports 802.11n/ac bandwidths of 20MHz and 40MHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR in this filing is 1.19 W/kg. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.19 W/kg and 1.19 W/kg respectively.
variousClass II permissive change to add the specific portable host (Acer N16P9) and antenna as documented. The highest reported SAR for body is 0.44 W/kg. Modular Approval. Output power is conducted. This device supports 802.11n/ac bandwidths of 20MHz and 40MHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.19 W/kg and 1.19 W/kg respectively.
variousClass II permissive change to add the specific portable host (Acer N16P9) and antenna as documented. Modular Approval. Output power is conducted. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are <0.10 W/kg and 0.80 W/kg respectively.
variousClass II permissive change to add the specific portable host (Acer N16P9) and antenna as documented. The highest reported SAR for body is 0.52 W/kg. Modular Approval. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.30 W/kg and 1.31 W/kg respectively.
variousClass II permissive change to add the specific portable host (Acer N16W1) with lower gain antenna as documented. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body condition is 0.91 W/kg. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.30 W/kg and 1.31 W/kg respectively.
variousClass II permissive change to add the specific portable host (Acer N16W1) with lower gain antenna as documented. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are <0.10 W/kg and 0.80 W/kg respectively.
variousClass II permissive change to add the specific portable laptop/notebook/tablet host (Acer N16W1) with lower gain antenna as documented. Output power is conducted. This device supports 802.11n/ac bandwidths of 20MHz and 40MHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body condition in this filing is 0.70 W/kg. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.19 W/kg and 1.19 W/kg respectively.
variousClass II permissive change to add the specific portable host (Lenovo ideapad FLEX4-1130,80U3). Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions in this filing are 0.48 W/kg and 0.50W/kg respectively. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.30 W/kg and 1.31 W/kg respectively
variousClass II permissive change to add the specific portable laptop/notebook/tablet host (Lenovo ideapad FLEX4-1130,80U3). Output power is conducted. This device supports 802.11n/ac bandwidths of 20MHz and 40MHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous transmission conditions in this filing are 0.15 W/kg and 0.17 W/kg respectively.. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.19 W/kg and 1.19 W/kg respectively.
variousClass II permissive change to add the specific portable host (Lenovo ideapad FLEX4-1130,80U3). Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous transmission conditions in this filing are <0.10 W/kg and 0.50 W/kg respectively. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are <0.10 W/kg and 0.80 W/kg respectively.
variousClass II permissive change to add the specific portable laptop/notebook/tablet host (Lenovo YOGA 710-11IKB) with power reduction implementation and antennas as documented. Output power is conducted. This device supports 802.11n/ac bandwidths of 20MHz and 40MHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported body SAR is 0.61W/Kg. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.19 W/kg and 1.19 W/kg respectively.
variousClass II permissive change to add the specific portable host (Lenovo YOGA 710-11IKB) with power reduction implementation and antennas as documented.. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 1.01 W/kg and 1.02W/kg respectively. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.30 W/kg and 1.31 W/kg respectively.
variousClass II permissive change to add the specific portable host (Lenovo YOGA 710-11IKB) with power reduction implementation and antennas as documented. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous transmission conditions are <0.10 W/kg and 1.02 W/kg respectively. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are <0.10 W/kg and 0.80 W/kg respectively.
variousClass II permissive change to add the specific portable laptop/notebook/tablet host (ASUSTeK TP201S, J201S, R210S) with power reduction implementation and antennas as documented. Output power is conducted. This device supports 802.11n/ac bandwidths of 20MHz and 40MHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 1.19 W/kg and 1.19 W/kg respectively. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.19 W/kg and 1.19 W/kg respectively.
variousClass II permissive change to add the specific portable host (ASUSTeK TP201S, J201S, R210S) with power reduction implementation and antennas as documented. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are <0.10 W/kg and 0.80 W/kg respectively.
variousClass II permissive change to add the specific portable host (ASUSTeK TP201S, J201S, R210S) with power reduction implementation and antennas as documented.. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 1.18 W/kg and 1.18 W/kg respectively. The highest reported SAR values for body and simultaneous transmission conditions across all filings under this FCC ID are 1.30 W/kg and 1.31 W/kg respectively.
variousClass II permissive change filing to update grant to new rules for Asus E205SA laptop/notebook/tablet host described in this and prior filings. Modular Approval. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require addtional evaluation as performed in this filing. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values in this filing and host/module configuration for standalone and simultaneous transmission conditions are 1.19 W/kg and 1.31 W/kg respectively. The highest reported SAR values accross all filings under this FCCID for standalone and simultaneous transmission conditions are 1.30 W/Kg and 1.31 W/Kg respectively.
variousClass II permissive change to add the specific portable host (Lenovo TP00067C). The highest reported SAR for standalone exposure condition is 0.85 W/kg. Modular Approval. Output power is conducted. This device supports 20 and 40 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0 cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0 cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Lenovo TP00067C). The highest reported SAR for standalone and simultaneous transmission exposure conditions are 0.80 W/kg, and 0.80 W/kg respectively. Modular Approval. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0 cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0 cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Lenovo TP00067C). The highest reported SAR for standalone and simultaneous transmission exposure conditions are < 0.10 W/kg, and 0.80 W/kg respectively. Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Lenovo YOGA 710-11ISK) with power reduction implementation and RF shielding change as documented. The highest reported SAR for body and simultaneous transmission conditions are 1.01 W/kg and 1.02 W/kg respectively. Modular Approval. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Lenovo YOGA 710-11ISK) with power reduction implementation and RF shielding change as documented. The highest reported SAR for body is 0.61 W/kg. Modular Approval. Output power is conducted. This device supports 802.11n/ac bandwidths of 20MHz and 40MHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Lenovo YOGA 710-11ISK) with power reduction implementation and RF shielding change as documented. The highest reported SAR for body is <0.10 W/kg. Modular Approval. Output power is conducted.
variousClass II permissive change to add the specific portable host (Lenovo YOGA 510-14ISK, Lenovo ideapad FLEX 4-1470, Lenovo YOGA 510-14AST, Lenovo ideapad FLEX 4-1435, Lenovo YOGA 510-14IKB, Lenovo ideapad FLEX 4-1480). Modular Approval. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 0.98 W/kg and 1.12 W/kg respectively. The highest reported SAR value across all filings under this FCC ID is 1.17 W/kg.
variousClass II permissive change to add the specific portable host (Lenovo YOGA 510-15ISK; Lenovo ideapad FLEX 4-1570; Lenovo YOGA 510-15IKB; Lenovo ideapad FLEX 4-1580). The highest reported SAR value of this filing is 1.30 W/Kg. Modular Approval. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0 cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0 cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Lenovo YOGA 510-15ISK; Lenovo ideapad FLEX 4-1570; Lenovo YOGA 510-15IKB; Lenovo ideapad FLEX 4-1580). The highest reported SAR value is 0.28 W/Kg. Modular Approval. Output power is conducted. This device supports 20 and 40 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0 cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0 cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Lenovo YOGA 510-14ISK, Lenovo ideapad FLEX 4-1470, Lenovo YOGA 510-14AST, Lenovo ideapad FLEX 4-1435, Lenovo YOGA 510-14IKB, Lenovo ideapad FLEX 4-1480). Modular Approval. Output power is conducted.
variousClass II permissive change to add the specific portable host (Lenovo YOGA 510-14ISK, Lenovo ideapad FLEX 4-1470, Lenovo YOGA 510-14AST, Lenovo ideapad FLEX 4-1435, Lenovo YOGA 510-14IKB, Lenovo ideapad FLEX 4-1480). Modular Approval. Output power is conducted. This device supports 802.11n/ac bandwidths of 20MHz and 40MHz in the 2.4GHz band and 20MHz, 40MHz, and 80MHz in the 5.8 GHz band. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value is 0.36 W/Kg.
variousClass II permissive change to add the specific portable host (Lenovo YOGA 510-15ISK; Lenovo ideapad FLEX 4-1570; Lenovo YOGA 510-15IKB; Lenovo ideapad FLEX 4-1580).
variousClass II permissive change to add the specific portable host (Lenovo ideapad 710S-13ISK). Modular Approval. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value of this filing is 1.16 W/Kg. The highest reported SAR value across all filings under this FCC ID is 1.17 W/kg.
variousClass II permissive change to add the specific portable host (Lenovo ideapad 710S-13ISK). Modular Approval. Output power is conducted. This device supports 802.11n/ac bandwidths of 20MHz and 40MHz in the 2.4GHz band and 20MHz, 40MHz, and 80MHz in the 5.8 GHz band. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value is 0.97 W/Kg.
variousClass II permissive change to add the specific portable host (Lenovo ideapad 710S-13ISK). Modular Approval. Output power is conducted.
variousClass II permissive change to add the specific portable host (Lenovo YOGA 700-14ISK) with new antenna model and reduced power as described in this filing. The highest reported SAR value of this filing is 1.17 W/Kg. Modular Approval. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi- transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Lenovo YOGA 700-14ISK) with new antenna model and reduced power as described in this filing. Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Lenovo YOGA 700-14ISK) with new antenna model and reduced power as described in this filing. The highest reported SAR value of this filing is 0.68 W/Kg. Modular Approval. Output power is conducted. This device supports This device supports 20 and 40 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change filing for new version chip change, show compliance with New U-NII-3 rule per FCC ET docket No. 13-49 and add 5 mm modular SAR by reduced power as documented in this filing. Modular Approval. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value is 0.71 W/Kg Class 2 Permissive Change for use in a specific host product (Lenovo ideapad Y700-17ISK) and antenna as described in this filing. A user to antenna separation distance of 0mm was applied to show compliance with FCC RF exposure requirements. The highest reported SAR value is 0.57 W/kg.
variousClass II permissive change filing for new version chip change, show compliance with New U-NII-3 rule per FCC ET docket No. 13-49 and add 5 mm modular SAR by reduced power as documented in this filing. Modular Approval. Output power is conducted. This device supports 20 and 40 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value is 0.64 W/Kg. Class 2 Permissive Change for use in a specific host product (Lenovo ideapad Y700-17ISK) and antenna as described in this filing. A user to antenna separation distance of 0mm was applied to show compliance with FCC RF exposure requirements. The highest reported SAR value is 0.51 W/kg.
variousClass II permissive change filing for new version chip change, show compliance with New U-NII-3 rule per FCC ET docket No. 13-49 and add 5 mm modular SAR by reduced power as documented in this filing. Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value is <0.10 W/Kg. Class 2 Permissive Change for use in a specific host product (Lenovo ideapad Y700-17ISK) and antenna as described in this filing.
variousClass II permissive change to add the specific portable host (Lenovo ideapad 500S-13ISK) with new antenna model and reduced power as described in this filing. The highest reported SAR value of this filing is 0.33 W/Kg. Modular Approval. Output power is conducted. This device supports This device supports 20 and 40 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi- transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Lenovo ideapad 500S-13ISK) with new antenna model and reduced power as described in this filing. Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi- transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Lenovo ideapad 500S-13ISK) with new antenna model and reduced power as described in this filing. The highest reported SAR value of this filing is 0.45 W/Kg. Modular Approval. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi- transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Lenovo Flex 3-1580) and antenna as described in this filing. The highest reported SAR value of this filing is 1.25 W/Kg. Modular Approval. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation as performed in this filing. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Lenovo Flex 3-1580) and antenna as described in this filing. Output power is conducted.
variousClass II permissive change to add the specific portable host (Lenovo Flex 3-1580) and antenna as described in this filing. The highest reported SAR value of this filing is 0.16 W/Kg. Modular Approval. Output power is conducted. This device supports 802.11n/ac bandwidths of 20MHz and 40MHz in the 2.4GHz band and 20MHz, 40MHz, and 80MHz in the 5.8 GHz band. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation as performed in this filing. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change to add the specific portable host (Lenovo Flex 3-1480) and antenna as described in this filing. The highest reported SAR value of this filing is 0.46 W/Kg. Modular Approval. Output power is conducted. This device supports 802.11n/ac bandwidths of 20MHz and 40MHz in the 2.4GHz band and 20MHz, 40MHz, and 80MHz in the 5.8 GHz band. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation as performed in this filing. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change filing for new version chip change, show compliance with New U-NII-3 rule per FCC ET docket No. 13-49 and add 5 mm modular SAR by reduced power as documented in this filing. Modular Approval. Output power is conducted. This device supports This device supports 20 and 40 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value is 0.64 W/Kg.
variousClass II permissive change filing for new version chip change, show compliance with New U-NII-3 rule per FCC ET docket No. 13-49 and add 5 mm modular SAR by reduced power as documented in this filing. Modular Approval. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value is 0.71 W/Kg.
variousClass II permissive change to add the specific portable host (Lenovo Flex 3-1480) and antenna as described in this filing. Output power is conducted.
variousClass II permissive change to add the specific portable host (Lenovo Flex 3-1480) and antenna as described in this filing. The highest reported SAR value of this filing is 1.22 W/Kg. Modular Approval. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require additional evaluation as performed in this filing. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission.
variousClass II permissive change filing for new version chip change, show compliance with New U-NII-3 rule per FCC ET docket No. 13-49 and add 5 mm modular SAR by reduced power as documented in this filing. Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 5 mm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value is <0.10 W/Kg.
variousClass II permissive change filing for to add specific Asus laptop/notebook/teblet hosts described in this filing. Output power is conducted.
variousClass II permissive change filing to add specific Asus laptop/notebook/tablet hosts described in this filing. Modular Approval. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require addtional evaluation as performed in this filing. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for this filing and for all filings accross this FCCID for body and simultaneous transmission conditions are 1.19 W/Kg and 1.31 W/Kg.
variousClass II permissive change filing to add specific Asus laptop/notebook/tablet hosts described in this filing . Modular Approval. Output power is conducted. This device supports 802.11n/ac bandwidths of 20MHz and 40MHz in the 2.4GHz band and 20MHz, 40MHz, and 80MHz in the 5.8 GHz band. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require addtional evaluation as performed in this filing. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR values for this filing and for all filings accross this FCCID for body and simultaneous transmission conditions are 1.20 W/Kg and 1.33 W/kg respectively
variousClass II permissive change filing to add specific Lenovo laptop/notebook hosts described in this filing. Modular Approval. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require addtional evaluation as performed in this filing. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value for this filing and for all filings accross this FCCID is 0.47 W/Kg.
variousClass II permissive change filing for to specific Lenovo laptop/notebook hosts described in this filing. Modular Approval. Output power is conducted.
variousClass II permissive change filing to add specific Lenovo laptop/notebook hosts described in this filing. Modular Approval. Output power is conducted. This device supports 802.11n/ac bandwidths of 20MHz and 40MHz in the 2.4GHz band and 20MHz, 40MHz, and 80MHz in the 5.8 GHz band. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. Other configurations or lesser separation distances require addtional evaluation as performed in this filing. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value for this filing and for all filings accross this FCCID is 0.94 W/Kg.
variousClass II permissive change filing for module shielding change as documented in this filing. Modular Approval. Output power is conducted. This device supports 802.11n/ac bandwidths of 20MHz and 40MHz in the 2.4GHz band and 20MHz, 40MHz, and 80MHz in the 5.8 GHz band. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value is 0.66 W/Kg.
variousClass II permissive change filing for module shielding change as documented in this filing. Modular Approval. Output power is conducted.
variousClass II permissive change filing for module shielding change as documented in this filing. Modular Approval. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value is 0.42 W/Kg.
variousClass II permissive change filing for module shielding change and limited certify for specific hosts as documented in this filing. Modular Approval. Output power is conducted.
variousClass II permissive change filing for module shielding change and limited certify for specific hosts as documented in this filing. Modular Approval. Output power is conducted. This device supports 802.11n/ac bandwidths of 20MHz and 40MHz in the 2.4GHz band and 20MHz, 40MHz, and 80MHz in the 5.8 GHz band. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value is 0.66 W/Kg.
variousClass II permissive change filing for module shielding change and limited certify for specific hosts as documented in this filing. Modular Approval. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value is 0.42 W/Kg.
variousModular Approval. Output power is conducted. This device supports 20, 40 and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value is 0.42 W/Kg.
variousModular Approval. Output power is conducted.
variousModular Approval. Output power is conducted. This device supports 802.11n/ac bandwidths of 20MHz and 40MHz in the 2.4GHz band and 20MHz, 40MHz, and 80MHz in the 5.8 GHz band. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This transmitter also has been approved by KDB 616217 SAR modular approval when operating at reduced power settings as described in this filing. The antenna(s) used for this device must be installed in the display section of laptop or notebook computers to provide a separation distance of at least 1.0cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3.0cm when positioned horizontally or vertically. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value is 0.66 W/Kg.
variousIs there an equipment authorization waiver associated with this application?No
variousIf there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
various Firm Name SPORTON International Inc.
various Bureau Veritas CPS(H.K.) Ltd., Taoyuan Branch
various UL Verification Services (Guangzhou) Co., Ltd.
various Shenzhen BALUN Technology Co., Ltd.
various Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch
various Sporton International Inc.
various SGS-CSTC Standards Technical Services Co., Ltd
various SGS-CSTC Standards Technical Services Co.,Ltd.
various Compliance Certificate Services, Inc.
various BTL Inc.
various East China Institute of Telecommunications
various Compliance Certification Services (KunShan) Inc.
various DEKRA TESTING AND CERTIFICATION Lin Kou Lab.
various Cerpass Technology (SuZhou) Co., Ltd.
various Compliance Certification Services Inc.
various SGS Taiwan Ltd.
various DEKRA TESTING AND CERTIFICATION CO., LTD. LinKou
various SGS TAIWAN LTD.
various Compliance Certification Services (Kunshan) Inc.
various Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch
various DEKRA Testing and Certification Co., Ltd.
various Name A******** C********
various E******** L********
various S****** G********
various H**** Q****
various K**** L********
various A**** C******
various K**** X******
various L****** Y******
various R******** C********
various M****** C********
various S**** H******
various Z**** Z****
various K****** C******
various V******** L********
various M**** C******
various H**** L********
various J****** L********
various S******** H******
various R******** W********
various N**** B******
various Telephone Number 886-3******** Extension:
various +886-********
various +86 0********
various 086-7********
various +886-******** Extension:
various 886-3********
various 88633********
various +86 (********
various +86 (********
various +886-******** Extension:
various + 86-******** Extension:
various 86-76******** Extension:
various 86-21********
various 88633******** Extension:
various 88628******** Extension:
various 86-05******** Extension:
various 886-2******** Extension:
various 88622******** Extension:
various +886-******** Extension:
various +886-******** Extension:
various 886-2******** Extension:
various 86-51********
various 886-3******** Extension:
various 886-2******** Extension:
various Fax Number 886-3********
various +886-********
various +886-********
various +886-********
various +886-********
various 86-76********
various 88633********
various 88628********
various 86-05********
various 886-2********
various +886-********
various +886-********
various 886-2********
various 86-51********
various 886-3********
various 886-2********
various 886 3********
various E-mail a******@sporton.com.tw
various e******@tw.bureauveritas.com
various S******@ul.com
various q******@baluntek.com
various k******@tw.bureauveritas.com
various K******@sgs.com
various l******@sgs.com
various r******@tw.bureauveritas.com
various J******@ccsrf.com
various s******@newbtl.com
various z******@ecit.org.cn
various k******@tw.ccsemc.com
various v******@dekra.com
various m******@cerpass.net
various h******@sgs.com
various j******@sgs.com
various s******@dekra.com
various R******@sgs.com
various n******@sgs.com
various e******@tw.ccsemc.com
various s******@quietek.com
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 15C CC 2402 2480 0.002
1 2 15C CC 2412 2462 0.303
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 15E 38 CC 5180 5240 0.054
3 2 15E 38 CC 5260 5320 0.056
3 3 15E 38 CC 5500 5720 0.045
3 4 15E 38 CC 5745 5825 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
4 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
5 1 15E 38 CC 5180 5240 0.054
5 2 15E 38 CC 5260 5320 0.056
5 3 15E 38 CC 5500 5720 0.045
5 4 15E 38 CC 5745 5825 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
6 1 15E 38 CC 5180 5240 0.054
6 2 15E 38 CC 5260 5320 0.056
6 3 15E 38 CC 5500 5720 0.045
6 4 15E 38 CC 5745 5825 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
7 1 15C CC 2402 2480 0.002
7 2 15C CC 2412 2462 0.303
7 3 15C CC 5745 5825 0.296
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
8 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
9 1 15C CC 2402 2480 0.002
9 2 15C CC 2412 2462 0.303
9 3 15C CC 5745 5825 0.296
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
10 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
11 1 15C CC 2402 2480 0.002
11 2 15C CC 2412 2462 0.303
11 3 15C CC 5745 5825 0.296
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
12 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
13 1 15E 38 CC 5180 5240 0.054
13 2 15E 38 CC 5260 5320 0.056
13 3 15E 38 CC 5500 5720 0.045
13 4 15E 38 CC 5745 5825 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
14 1 15C CC 2402 2480 0.002
14 2 15C CC 2412 2462 0.303
14 3 15C CC 5745 5825 0.296
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
15 1 15E 38 CC 5180 5240 0.054
15 2 15E 38 CC 5260 5320 0.056
15 3 15E 38 CC 5500 5720 0.045
15 4 15E 38 CC 5745 5825 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
16 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
17 1 15C CC 2402 2480 0.002
17 2 15C CC 2412 2462 0.303
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
18 1 15E CC 5180 5240 0.054
18 2 15E CC 5260 5320 0.056
18 3 15E CC 5500 5720 0.045
18 4 15E CC 5745 5825 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
19 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
20 1 15C CC 2402 2480 0.002
20 2 15C CC 2412 2462 0.303
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
21 1 15E 38 CC 5180 5240 0.054
21 2 15E 38 CC 5260 5320 0.056
21 3 15E 38 CC 5500 5720 0.045
21 4 15E 38 CC 5745 5825 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
22 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
23 1 15E 38 CC 5180 5240 0.054
23 2 15E 38 CC 5260 5320 0.056
23 3 15E 38 CC 5500 5720 0.045
23 4 15E 38 CC 5745 5825 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
24 1 15C CC 2402 2480 0.002
24 2 15C CC 2412 2462 0.303
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
25 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
26 1 15E 38 CC 5180 5240 0.054
26 2 15E 38 CC 5260 5320 0.056
26 3 15E 38 CC 5500 5720 0.045
26 4 15E 38 CC 5745 5825 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
27 1 15C CC 2402 2480 0.002
27 2 15C CC 2412 2462 0.303
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
28 1 15E 38 CC 5180 5240 0.054
28 2 15E 38 CC 5260 5320 0.056
28 3 15E 38 CC 5500 5720 0.045
28 4 15E 38 CC 5745 5825 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
29 1 15C CC 2402 2480 0.002
29 2 15C CC 2412 2462 0.303
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
30 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
31 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
32 1 15E CC 5180 5240 0.054
32 2 15E CC 5260 5320 0.056
32 3 15E CC 5500 5720 0.045
32 4 15E CC 5745 5825 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
33 1 15C CC 2402 2480 0.002
33 2 15C CC 2412 2462 0.303
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
34 1 15E CC 5180 5240 0.054
34 2 15E CC 5260 5320 0.056
34 3 15E CC 5500 5720 0.045
34 4 15E CC 5745 5825 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
35 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
36 1 15C CC 2402 2480 0.002
36 2 15C CC 2412 2462 0.303
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
37 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
38 1 15C CC 2402 2480 0.002
38 2 15C CC 2412 2462 0.303
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
39 1 15E 38 CC 5180 5240 0.054
39 2 15E 38 CC 5260 5320 0.056
39 3 15E 38 CC 5500 5720 0.045
39 4 15E 38 CC 5745 5825 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
40 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
41 1 15E 38 CC 5180 5240 0.054
41 2 15E 38 CC 5260 5320 0.056
41 3 15E 38 CC 5500 5720 0.045
41 4 15E 38 CC 5745 5825 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
42 1 15C CC 2402 2480 0.002
42 2 15C CC 2412 2462 0.303
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
43 1 15E 38 CC 5180 5240 0.054
43 2 15E 38 CC 5260 5320 0.056
43 3 15E 38 CC 5500 5720 0.045
43 4 15E 38 CC 5745 5825 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
44 1 15C CC 2402 2480 0.002
44 2 15C CC 2412 2462 0.303
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
45 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
46 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
47 1 15E CC 5180 5240 0.054
47 2 15E CC 5260 5320 0.056
47 3 15E CC 5500 5720 0.045
47 4 15E CC 5745 5825 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
48 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
49 1 15E 38 CC 5180 5240 0.054
49 2 15E 38 CC 5260 5320 0.056
49 3 15E 38 CC 5500 5720 0.045
49 4 15E 38 CC 5745 5825 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
50 1 15C CC 2402 2480 0.002
50 2 15C CC 2412 2462 0.303
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
51 1 15C CC 2402 2480 0.002
51 2 15C CC 2412 2462 0.303
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
52 1 15E CC 5180 5240 0.054
52 2 15E CC 5260 5320 0.056
52 3 15E CC 5500 5720 0.045
52 4 15E CC 5745 5825 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
53 1 15C CC 2402 2480 0.002
53 2 15C CC 2412 2462 0.303
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
54 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
55 1 15E 38 CC 5180 5240 0.054
55 2 15E 38 CC 5260 5320 0.056
55 3 15E 38 CC 5500 5720 0.045
55 4 15E 38 CC 5745 5825 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
56 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
57 1 15C CC 2402 2480 0.002
57 2 15C CC 2412 2462 0.303
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
58 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
59 1 15E CC 5180 5240 0.054
59 2 15E CC 5260 5320 0.056
59 3 15E CC 5500 5720 0.045
59 4 15E CC 5745 5825 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
60 1 15C CC 2402 2480 0.002
60 2 15C CC 2412 2462 0.303
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
61 1 15E 38 CC 5180 5240 0.054
61 2 15E 38 CC 5260 5320 0.056
61 3 15E 38 CC 5500 5720 0.045
61 4 15E 38 CC 5745 5825 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
62 1 15C CC 2402 2480 0.002
62 2 15C CC 2412 2462 0.303
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
63 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
64 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
65 1 15E 38 CC 5180 5240 0.054
65 2 15E 38 CC 5260 5320 0.056
65 3 15E 38 CC 5500 5720 0.045
65 4 15E 38 CC 5745 5825 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
66 1 15E 38 CC 5180 5240 0.054
66 2 15E 38 CC 5260 5320 0.056
66 3 15E 38 CC 5500 5720 0.045
66 4 15E 38 CC 5745 5825 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
67 1 15C CC 2402 2480 0.002
67 2 15C CC 2412 2462 0.303
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
68 1 15C CC 2402 2480 0.002
68 2 15C CC 2412 2462 0.303
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
69 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
70 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
71 1 15C CC 2402 2480 0.002
71 2 15C CC 2412 2462 0.303
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
72 1 15E CC 5180 5240 0.054
72 2 15E CC 5260 5320 0.056
72 3 15E CC 5500 5720 0.045
72 4 15E CC 5745 5825 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
73 1 15E CC 5180 5240 0.054
73 2 15E CC 5260 5320 0.056
73 3 15E CC 5500 5720 0.045
73 4 15E CC 5745 5825 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
74 1 15C CC 2402 2480 0.002
74 2 15C CC 2412 2462 0.303
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
75 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
76 1 15C CC 2402 2480 0.002
76 2 15C CC 2412 2462 0.303
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
77 1 15E CC 5180 5240 0.054
77 2 15E CC 5260 5320 0.056
77 3 15E CC 5500 5720 0.045
77 4 15E CC 5745 5825 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
78 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
79 1 15E 38 CC 5180 5240 0.054
79 2 15E 38 CC 5260 5320 0.056
79 3 15E 38 CC 5500 5720 0.045
79 4 15E 38 CC 5745 5825 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
80 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
81 1 15C CC 2402 2480 0.002
81 2 15C CC 2412 2462 0.303
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
82 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
83 1 15E CC 5180 5240 0.054
83 2 15E CC 5260 5320 0.056
83 3 15E CC 5500 5720 0.045
83 4 15E CC 5745 5825 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
84 1 15C CC 2402 2480 0.002
84 2 15C CC 2412 2462 0.303
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
85 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
86 1 15E 38 CC 5180 5240 0.054
86 2 15E 38 CC 5260 5320 0.056
86 3 15E 38 CC 5500 5720 0.045
86 4 15E 38 CC 5745 5825 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
87 1 15C CC 2402 2480 0.002
87 2 15C CC 2412 2462 0.303
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
88 1 15E 38 CC 5180 5240 0.054
88 2 15E 38 CC 5260 5320 0.056
88 3 15E 38 CC 5500 5720 0.045
88 4 15E 38 CC 5745 5825 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
89 1 15C CC 2402 2480 0.002
89 2 15C CC 2412 2462 0.303
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
90 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
91 1 15E 38 CC 5180 5240 0.054
91 2 15E 38 CC 5260 5320 0.056
91 3 15E 38 CC 5500 5720 0.045
91 4 15E 38 CC 5745 5825 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
92 1 15C CC 2402 2480 0.002
92 2 15C CC 2412 2462 0.303
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
93 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
94 1 15C CC 2402 2480 0.002
94 2 15C CC 2412 2462 0.303
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
95 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
96 1 15E CC 5180 5240 0.054
96 2 15E CC 5260 5320 0.056
96 3 15E CC 5500 5720 0.045
96 4 15E CC 5745 5825 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
97 1 15C CC 2402 2480 0.002
97 2 15C CC 2412 2462 0.303
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
98 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
99 1 15E CC 5180 5240 0.054
99 2 15E CC 5260 5320 0.056
99 3 15E CC 5500 5720 0.045
99 4 15E CC 5745 5825 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
100 1 15E 38 CC 5180 5240 0.054
100 2 15E 38 CC 5260 5320 0.056
100 3 15E 38 CC 5500 5720 0.045
100 4 15E 38 CC 5745 5825 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
101 1 15C CC 2402 2480 0.002
101 2 15C CC 2412 2462 0.303
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
102 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
103 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
104 1 15E 38 CC 5180 5240 0.054
104 2 15E 38 CC 5260 5320 0.056
104 3 15E 38 CC 5500 5720 0.045
104 4 15E 38 CC 5745 5825 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
105 1 15C CC 2402 2480 0.002
105 2 15C CC 2412 2462 0.303
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
106 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
107 1 15C CC 2402 2480 0.002
107 2 15C CC 2412 2462 0.303
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
108 1 15E 38 CC 5180 5240 0.054
108 2 15E 38 CC 5260 5320 0.056
108 3 15E 38 CC 5500 5720 0.045
108 4 15E 38 CC 5745 5825 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
109 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
110 1 15C CC 2402 2480 0.002
110 2 15C CC 2412 2462 0.303
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
111 1 15E 38 CC 5180 5240 0.054
111 2 15E 38 CC 5260 5320 0.056
111 3 15E 38 CC 5500 5720 0.045
111 4 15E 38 CC 5745 5825 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
112 1 15E 38 CC 5180 5240 0.054
112 2 15E 38 CC 5260 5320 0.056
112 3 15E 38 CC 5500 5720 0.045
112 4 15E 38 CC 5745 5825 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
113 1 15C CC 2402 2480 0.002
113 2 15C CC 2412 2462 0.303
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
114 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
115 1 15C CC 2402 2480 0.002
115 2 15C CC 2412 2462 0.303
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
116 1 15E 38 CC 5180 5240 0.054
116 2 15E 38 CC 5260 5320 0.056
116 3 15E 38 CC 5500 5720 0.045
116 4 15E 38 CC 5745 5825 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
117 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
118 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
119 1 15C CC 2402 2480 0.002
119 2 15C CC 2412 2462 0.303
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
120 1 15E 38 CC 5180 5240 0.054
120 2 15E 38 CC 5260 5320 0.056
120 3 15E 38 CC 5500 5720 0.045
120 4 15E 38 CC 5745 5825 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
121 1 15C CC 2402 2480 0.002
121 2 15C CC 2412 2462 0.303
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
122 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
123 1 15E 38 CC 5180 5240 0.054
123 2 15E 38 CC 5260 5320 0.056
123 3 15E 38 CC 5500 5720 0.045
123 4 15E 38 CC 5745 5825 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
124 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
125 1 15C CC 2402 2480 0.002
125 2 15C CC 2412 2462 0.303
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
126 1 15E 38 CC 5180 5240 0.054
126 2 15E 38 CC 5260 5320 0.056
126 3 15E 38 CC 5500 5720 0.045
126 4 15E 38 CC 5745 5825 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
127 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
128 1 15C CC 2402 2480 0.002
128 2 15C CC 2412 2462 0.303
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
129 1 15E 38 CC 5180 5240 0.054
129 2 15E 38 CC 5260 5320 0.056
129 3 15E 38 CC 5500 5720 0.045
129 4 15E 38 CC 5745 5825 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
130 1 15E 38 CC 5180 5240 0.054
130 2 15E 38 CC 5260 5320 0.056
130 3 15E 38 CC 5500 5720 0.045
130 4 15E 38 CC 5745 5825 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
131 1 15C CC 2402 2480 0.002
131 2 15C CC 2412 2462 0.303
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
132 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
133 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
134 1 15C CC 2402 2480 0.002
134 2 15C CC 2412 2462 0.303
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
135 1 15E 38 CC 5180 5240 0.054
135 2 15E 38 CC 5260 5320 0.056
135 3 15E 38 CC 5500 5720 0.045
135 4 15E 38 CC 5745 5825 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
136 1 15E 38 CC 5180 5240 0.054
136 2 15E 38 CC 5260 5320 0.056
136 3 15E 38 CC 5500 5720 0.045
136 4 15E 38 CC 5745 5825 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
137 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
138 1 15C CC 2402 2480 0.002
138 2 15C CC 2412 2462 0.303
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
139 1 15C CC 2402 2480 0.002
139 2 15C CC 2412 2462 0.303
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
140 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
141 1 15E 38 CC 5180 5240 0.054
141 2 15E 38 CC 5260 5320 0.056
141 3 15E 38 CC 5500 5720 0.045
141 4 15E 38 CC 5745 5825 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
142 1 15C CC 2402 2480 0.002
142 2 15C CC 2412 2462 0.303
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
143 1 15E 38 CC 5180 5240 0.054
143 2 15E 38 CC 5260 5320 0.056
143 3 15E 38 CC 5500 5720 0.045
143 4 15E 38 CC 5745 5825 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
144 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
145 1 15E 38 CC 5180 5240 0.054
145 2 15E 38 CC 5260 5320 0.056
145 3 15E 38 CC 5500 5720 0.045
145 4 15E 38 CC 5745 5825 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
146 1 15C CC 2402 2480 0.002
146 2 15C CC 2412 2462 0.303
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
147 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
148 1 15C CC 2402 2480 0.002
148 2 15C CC 2412 2462 0.303
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
149 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
150 1 15E 38 CC 5180 5240 0.054
150 2 15E 38 CC 5260 5320 0.056
150 3 15E 38 CC 5500 5720 0.045
150 4 15E 38 CC 5745 5825 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
151 1 15E 38 CC 5180 5240 0.054
151 2 15E 38 CC 5260 5320 0.056
151 3 15E 38 CC 5500 5720 0.045
151 4 15E 38 CC 5745 5825 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
152 1 15C CC 2402 2480 0.002
152 2 15C CC 2412 2462 0.303
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
153 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
154 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
155 1 15E 38 CC 5180 5240 0.054
155 2 15E 38 CC 5260 5320 0.056
155 3 15E 38 CC 5500 5720 0.045
155 4 15E 38 CC 5745 5825 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
156 1 15C CC 2402 2480 0.002
156 2 15C CC 2412 2462 0.303
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
157 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
158 1 15E 38 CC 5180 5240 0.054
158 2 15E 38 CC 5260 5320 0.056
158 3 15E 38 CC 5500 5720 0.045
158 4 15E 38 CC 5745 5825 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
159 1 15C CC 2402 2480 0.002
159 2 15C CC 2412 2462 0.303
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
160 1 15C CC 2402 2480 0.002
160 2 15C CC 2412 2462 0.303
160 3 15C CC 5745 5825 0.296
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
161 1 15E 38 CC 5180 5240 0.054
161 2 15E 38 CC 5260 5320 0.056
161 3 15E 38 CC 5500 5720 0.045
161 4 15E 38 CC 5745 5825 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
162 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
163 1 15C CC 2402 2480 0.002
163 2 15C CC 2412 2462 0.303
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
164 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
165 1 15E 38 CC 5180 5240 0.054
165 2 15E 38 CC 5260 5320 0.056
165 3 15E 38 CC 5500 5720 0.045
165 4 15E 38 CC 5745 5825 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
166 1 15C CC 2402 2480 0.002
166 2 15C CC 2412 2462 0.303
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
167 1 15E 38 CC 5180 5240 0.054
167 2 15E 38 CC 5260 5320 0.056
167 3 15E 38 CC 5500 5720 0.045
167 4 15E 38 CC 5745 5825 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
168 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
169 1 15C CC 2402 2480 0.002
169 2 15C CC 2412 2462 0.303
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
170 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
171 1 15E 38 CC 5180 5240 0.054
171 2 15E 38 CC 5260 5320 0.056
171 3 15E 38 CC 5500 5720 0.045
171 4 15E 38 CC 5745 5825 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
172 1 15C CC 2402 2480 0.002
172 2 15C CC 2412 2462 0.303
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
173 1 15E 38 CC 5180 5240 0.054
173 2 15E 38 CC 5260 5320 0.056
173 3 15E 38 CC 5500 5720 0.045
173 4 15E 38 CC 5745 5825 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
174 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
175 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
176 1 15E 38 CC 5180 5240 0.054
176 2 15E 38 CC 5260 5320 0.056
176 3 15E 38 CC 5500 5720 0.045
176 4 15E 38 CC 5745 5825 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
177 1 15C CC 2402 2480 0.002
177 2 15C CC 2412 2462 0.303
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
178 1 15E 38 CC 5180 5240 0.054
178 2 15E 38 CC 5260 5320 0.056
178 3 15E 38 CC 5500 5720 0.045
178 4 15E 38 CC 5745 5825 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
179 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
180 1 15C CC 2402 2402 0.002
180 2 15C CC 2412 2462 0.303
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
181 1 15C CC 2402 2480 0.002
181 2 15C CC 2412 2462 0.303
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
182 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
183 1 15E 38 CC 5180 5240 0.054
183 2 15E 38 CC 5260 5320 0.056
183 3 15E 38 CC 5500 5720 0.045
183 4 15E 38 CC 5745 5825 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
184 1 15E 38 CC 5180 5240 0.054
184 2 15E 38 CC 5260 5320 0.056
184 3 15E 38 CC 5500 5720 0.045
184 4 15E 38 CC 5745 5825 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
185 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
186 1 15C CC 2402 2480 0.002
186 2 15C CC 2412 2462 0.303
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
187 1 15E 38 CC 5180 5240 0.054
187 2 15E 38 CC 5260 5320 0.056
187 3 15E 38 CC 5500 5720 0.045
187 4 15E 38 CC 5745 5825 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
188 1 15C CC 2402 2480 0.002
188 2 15C CC 2412 2462 0.303
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
189 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
190 1 15C CC 2402 2480 0.002
190 2 15C CC 2412 2462 0.303
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
191 1 15E 38 CC 5180 5240 0.054
191 2 15E 38 CC 5260 5320 0.056
191 3 15E 38 CC 5500 5720 0.045
191 4 15E 38 CC 5745 5825 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
192 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
193 1 15C CC 2402 2480 0.002
193 2 15C CC 2412 2462 0.303
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
194 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
195 1 15E 38 CC 5180 5240 0.054
195 2 15E 38 CC 5260 5320 0.056
195 3 15E 38 CC 5500 5720 0.045
195 4 15E 38 CC 5745 5825 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
196 1 15E 38 CC 5180 5240 0.054
196 2 15E 38 CC 5260 5320 0.056
196 3 15E 38 CC 5500 5720 0.045
196 4 15E 38 CC 5745 5825 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
197 1 15C CC 2402 2480 0.002
197 2 15C CC 2412 2462 0.303
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
198 1 15E 38 CC 5180 5240 0.054
198 2 15E 38 CC 5260 5320 0.056
198 3 15E 38 CC 5500 5720 0.045
198 4 15E 38 CC 5745 5825 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
199 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
200 1 15E 36 38 CC 5180 5240 0.054
200 2 15E 36 38 CC 5260 5320 0.056
200 3 15E 36 38 CC 5500 5700 0.045
200 4 15E 36 38 CC 5745 5825 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
201 1 15C CC 2402 2480 0.002
201 2 15C 36 CC 2412 2462 0.303
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
202 1 15C 36 CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
203 1 15E 38 CC 5180 5240 0.054
203 2 15E 38 CC 5260 5320 0.056
203 3 15E 38 CC 5500 5720 0.045
203 4 15E 38 CC 5745 5825 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
204 1 15E 38 CC 5180 5240 0.054
204 2 15E 38 CC 5260 5320 0.056
204 3 15E 38 CC 5500 5720 0.045
204 4 15E 38 CC 5745 5825 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
205 1 15C CC 2402 2480 0.002
205 2 15C CC 2412 2462 0.303
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
206 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
207 1 15C CC 2402 2480 0.002
207 2 15C CC 2412 2462 0.303
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
208 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
209 1 15E 38 CC 5180 5240 0.054
209 2 15E 38 CC 5260 5320 0.056
209 3 15E 38 CC 5500 5720 0.045
209 4 15E 38 CC 5745 5825 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
210 1 15C CC 2402 2480 0.002
210 2 15C CC 2412 2462 0.303
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
211 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
212 1 15E 38 CC 5180 5240 0.054
212 2 15E 38 CC 5260 5320 0.056
212 3 15E 38 CC 5500 5720 0.045
212 4 15E 38 CC 5745 5825 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
213 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
214 1 15C CC 2402 2480 0.002
214 2 15C CC 2412 2462 0.303
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
215 1 15E 38 CC 5180 5240 0.054
215 2 15E 38 CC 5260 5320 0.056
215 3 15E 38 CC 5500 5720 0.045
215 4 15E 38 CC 5745 5825 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
216 1 15C CC 2402 2480 0.002
216 2 15C CC 2412 2462 0.303
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
217 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
218 1 15C CC 2402 2480 0.002
218 2 15C CC 2412 2462 0.303
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
219 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
220 1 15E 38 CC 5180 5240 0.054
220 2 15E 38 CC 5260 5320 0.056
220 3 15E 38 CC 5500 5720 0.045
220 4 15E 38 CC 5745 5825 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
221 1 15E 39 CC 5180 5240 0.054
221 2 15E 39 CC 5260 5320 0.056
221 3 15E 39 CC 5500 5720 0.045
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
222 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
223 1 15C CC 2402 2480 0.002
223 2 15C CC 2412 2462 0.303
223 3 15C CC 5745 5825 0.296
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
224 1 15C CC 2402 2480 0.002
224 2 15C CC 2412 2462 0.303
224 3 15C CC 5745 5825 0.296
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
225 1 15C CC 2402 2480 0.002
225 2 15C CC 2412 2462 0.303
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
226 1 15E 38 CC 5180 5240 0.054
226 2 15E 38 CC 5260 5320 0.056
226 3 15E 38 CC 5500 5720 0.045
226 4 15E 38 CC 5745 5825 0.054
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
227 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
228 1 15E 39 CC 5180 5240 0.054
228 2 15E 39 CC 5260 5320 0.056
228 3 15E 39 CC 5500 5720 0.045
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
229 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
230 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
231 1 15E 39 CC 5180 5240 0.054
231 2 15E 39 CC 5260 5320 0.056
231 3 15E 39 CC 5500 5720 0.045
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
232 1 15C CC 2402 2480 0.002
232 2 15C CC 2412 2462 0.303
232 3 15C CC 5745 5825 0.296
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
233 1 15E 39 CC 5180 5240 0.054
233 2 15E 39 CC 5260 5320 0.056
233 3 15E 39 CC 5500 5720 0.045
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
234 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
235 1 15C CC 2402 2480 0.002
235 2 15C CC 2412 2462 0.303
235 3 15C CC 5745 5825 0.296
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
236 1 15C CC 2402 2480 0.002
236 2 15C CC 2412 2462 0.303
236 3 15C CC 5745 5825 0.296
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
237 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
238 1 15E 39 CC 5180 5240 0.054
238 2 15E 39 CC 5260 5320 0.056
238 3 15E 39 CC 5500 5720 0.045
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
239 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
240 1 15C CC 2402 2480 0.002
240 2 15C CC 2412 2462 0.303
240 3 15C CC 5745 5825 0.296
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
241 1 15E 39 CC 5180 5240 0.054
241 2 15E 39 CC 5260 5320 0.056
241 3 15E 39 CC 5500 5720 0.045
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
242 1 15B
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
243 1 15E 39 CC 5180 5240 0.054
243 2 15E 39 CC 5260 5320 0.056
243 3 15E 39 CC 5500 5720 0.045
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
244 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
245 1 15C CC 2402 2480 0.002
245 2 15C CC 2412 2462 0.303
245 3 15C CC 5745 5825 0.296

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC