submitted / available | |||||||
---|---|---|---|---|---|---|---|
|
Unser Manual Regulatory | Users Manual | 461.56 KiB | March 03 2014 | |||
|
User Manual | Users Manual | 885.26 KiB | / October 01 2015 | |||
|
User Manual General | Users Manual | 4.62 MiB | March 03 2014 | |||
|
User Manual 20160628 v1 - Technical-User Manual (Statement) | Users Manual | 155.36 KiB | November 07 2016 / June 01 2017 | |||
|
User Manual 20160701 v1 - Technical-User Manual R1 | Users Manual | 1.84 MiB | November 07 2016 / June 01 2017 | |||
Cover Letter(s) | November 07 2016 | ||||||
Cover Letter(s) | November 07 2016 | ||||||
Cover Letter(s) | November 07 2016 | ||||||
Cover Letter(s) | November 07 2016 | ||||||
Cover Letter(s) | November 07 2016 | ||||||
External Photos | November 07 2016 / June 01 2017 | ||||||
ID Label/Location Info | November 07 2016 | ||||||
Internal Photos | November 07 2016 / June 01 2017 | ||||||
RF Exposure Info | November 07 2016 | ||||||
Test Report | November 07 2016 | ||||||
Test Setup Photos | November 07 2016 / June 01 2017 | ||||||
Test Report | November 07 2016 | ||||||
Cover Letter(s) | November 07 2016 | ||||||
RF Exposure Info | November 07 2016 | ||||||
Test Report | November 07 2016 | ||||||
Test Report | November 07 2016 | ||||||
Test Report | November 07 2016 | ||||||
Test Report | November 07 2016 | ||||||
Cover Letter(s) | |||||||
Cover Letter(s) | |||||||
Cover Letter(s) | |||||||
Cover Letter(s) | |||||||
Cover Letter(s) | |||||||
Test Report | |||||||
Test Setup Photos | |||||||
Cover Letter(s) | September 12 2014 | ||||||
Cover Letter(s) | September 12 2014 | ||||||
Cover Letter(s) | September 12 2014 | ||||||
Cover Letter(s) | September 12 2014 | ||||||
RF Exposure Info | September 12 2014 | ||||||
Test Setup Photos | September 12 2014 | ||||||
Cover Letter(s) | |||||||
External Photos | / October 01 2015 | ||||||
ID Label/Location Info | |||||||
Internal Photos | / October 01 2015 | ||||||
Internal Photos | / October 01 2015 | ||||||
ID Label/Location Info | |||||||
Cover Letter(s) | |||||||
Cover Letter(s) | |||||||
RF Exposure Info | |||||||
RF Exposure Info | |||||||
Test Report | |||||||
Test Setup Photos | / October 01 2015 | ||||||
Test Report | |||||||
ID Label/Location Info | |||||||
Test Report | |||||||
Cover Letter(s) | March 03 2014 | ||||||
External Photos | March 03 2014 | ||||||
Internal Photos | March 03 2014 | ||||||
Cover Letter(s) | March 03 2014 | ||||||
ID Label/Location Info | March 03 2014 | ||||||
Cover Letter(s) | March 03 2014 | ||||||
RF Exposure Info | March 03 2014 | ||||||
RF Exposure Info | March 03 2014 | ||||||
RF Exposure Info | March 03 2014 | ||||||
RF Exposure Info | March 03 2014 | ||||||
Test Setup Photos | March 03 2014 | ||||||
Test Report | March 03 2014 | ||||||
Test Setup Photos | March 03 2014 | ||||||
Cover Letter(s) | March 03 2014 | ||||||
Test Setup Photos | March 03 2014 | ||||||
Test Report | March 03 2014 | ||||||
Test Report | March 03 2014 | ||||||
Test Setup Photos | March 03 2014 | ||||||
Internal Photos | March 03 2014 | ||||||
Test Setup Photos | March 03 2014 | ||||||
Test Report | March 03 2014 | ||||||
Test Setup Photos | March 03 2014 | ||||||
Cover Letter(s) | |||||||
Cover Letter(s) | |||||||
Cover Letter(s) | |||||||
Attestation Statements | |||||||
Internal Photos | |||||||
RF Exposure Info | |||||||
RF Exposure Info | |||||||
RF Exposure Info | |||||||
RF Exposure Info | |||||||
RF Exposure Info | |||||||
RF Exposure Info | |||||||
Cover Letter(s) | |||||||
RF Exposure Info | |||||||
RF Exposure Info | |||||||
RF Exposure Info | |||||||
Cover Letter(s) | |||||||
RF Exposure Info | |||||||
Cover Letter(s) | |||||||
Cover Letter(s) | |||||||
Cover Letter(s) | |||||||
Cover Letter(s) | |||||||
RF Exposure Info | |||||||
RF Exposure Info | |||||||
RF Exposure Info | |||||||
RF Exposure Info | |||||||
Test Setup Photos | / April 11 2013 | ||||||
Cover Letter(s) | April 07 2013 | ||||||
Cover Letter(s) | April 07 2013 |
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2016-07-11 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Class II Permissive Change |
2 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
3 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | ||
4 | 2422 ~ 2452 | DTS - Digital Transmission System | ||
5 | 2422 ~ 2452 | DTS - Digital Transmission System | ||
6 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
7 | 2015-11-16 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | |
8 | 2014-12-09 | 5510 ~ 5670 | NII - Unlicensed National Information Infrastructure TX | |
9 | 5755 ~ 5795 | DTS - Digital Transmission System | ||
10 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
11 | 2014-11-26 | 5510 ~ 5670 | NII - Unlicensed National Information Infrastructure TX | |
12 | 5755 ~ 5795 | DTS - Digital Transmission System | ||
13 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
14 | 2014-03-03 | 5510 ~ 5670 | NII - Unlicensed National Information Infrastructure TX | |
15 | 5755 ~ 5795 | DTS - Digital Transmission System | ||
16 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
17 | 2013-12-16 | 5510 ~ 5670 | NII - Unlicensed National Information Infrastructure TX | |
18 | 5755 ~ 5795 | DTS - Digital Transmission System | ||
19 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
20 | 2013-09-20 | 5510 ~ 5670 | NII - Unlicensed National Information Infrastructure TX | |
21 | 5755 ~ 5795 | DTS - Digital Transmission System | ||
22 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
23 | 2013-07-04 | 5755 ~ 5795 | DTS - Digital Transmission System | |
24 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
25 | 5510 ~ 5670 | NII - Unlicensed National Information Infrastructure TX | ||
26 | 2013-06-18 | 5755 ~ 5795 | DTS - Digital Transmission System | |
27 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
28 | 5510 ~ 5670 | NII - Unlicensed National Information Infrastructure TX | ||
29 | 2013-06-13 | 2402 ~ 2480 | DTS - Digital Transmission System | |
30 | 5510 ~ 5670 | NII - Unlicensed National Information Infrastructure TX | ||
31 | 5755 ~ 5795 | DTS - Digital Transmission System | ||
32 | 2013-06-11 | 5510 ~ 5670 | NII - Unlicensed National Information Infrastructure TX | |
33 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
34 | 5755 ~ 5795 | DTS - Digital Transmission System | ||
35 | 5755 ~ 5795 | DTS - Digital Transmission System | ||
36 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
37 | 5510 ~ 5670 | NII - Unlicensed National Information Infrastructure TX | ||
38 | 2013-06-04 | 5755 ~ 5795 | DTS - Digital Transmission System | |
39 | 5510 ~ 5670 | NII - Unlicensed National Information Infrastructure TX | ||
40 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
41 | 2013-06-03 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | |
42 | 5755 ~ 5795 | DTS - Digital Transmission System | ||
43 | 5510 ~ 5670 | NII - Unlicensed National Information Infrastructure TX | ||
44 | 2013-04-15 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | |
45 | 5510 ~ 5670 | NII - Unlicensed National Information Infrastructure TX | ||
46 | 5755 ~ 5795 | DTS - Digital Transmission System | ||
47 | 2013-04-03 | 5755 ~ 5795 | DTS - Digital Transmission System | |
48 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
49 | 5510 ~ 5670 | NII - Unlicensed National Information Infrastructure TX | ||
50 | 2013-03-20 | 5755 ~ 5795 | DTS - Digital Transmission System | |
51 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
52 | 5510 ~ 5670 | NII - Unlicensed National Information Infrastructure TX | ||
53 | 2013-03-13 | 5510 ~ 5670 | NII - Unlicensed National Information Infrastructure TX | |
54 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
55 | 5755 ~ 5795 | DTS - Digital Transmission System | ||
56 | 2013-02-21 | 5755 ~ 5795 | DTS - Digital Transmission System | |
57 | 5510 ~ 5670 | NII - Unlicensed National Information Infrastructure TX | ||
58 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
59 | 2012-12-31 | 5180 ~ 5240 | NII - Unlicensed National Information Infrastructure TX | Class II permissive change or modification of presently authorized equipment |
60 | 2402 ~ 2480 | DTS - Digital Transmission System | ||
61 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
62 | 2012-12-23 | 5510 ~ 5670 | NII - Unlicensed National Information Infrastructure TX | Class II Permissive Change |
63 | 5755 ~ 5795 | DTS - Digital Transmission System | ||
64 | 2012-12-21 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | |
65 | 2012-12-20 | 5510 ~ 5670 | NII - Unlicensed National Information Infrastructure TX | |
66 | 5755 ~ 5795 | DTS - Digital Transmission System | ||
67 | 2012-12-17 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | |
68 | 5755 ~ 5795 | DTS - Digital Transmission System | ||
69 | 5510 ~ 5670 | NII - Unlicensed National Information Infrastructure TX | ||
70 | 2012-11-22 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | |
71 | 5510 ~ 5670 | NII - Unlicensed National Information Infrastructure TX | ||
72 | 5755 ~ 5795 | DTS - Digital Transmission System | ||
73 | 2012-11-14 | 5510 ~ 5670 | NII - Unlicensed National Information Infrastructure TX | |
74 | 2012-11-13 | 5755 ~ 5795 | DTS - Digital Transmission System | |
75 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
76 | 2012-06-26 | 5510 ~ 5670 | NII - Unlicensed National Information Infrastructure TX | |
77 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
78 | 5755 ~ 5795 | DTS - Digital Transmission System | ||
79 | 2012-06-08 | 5510 ~ 5670 | NII - Unlicensed National Information Infrastructure TX | |
80 | 5755 ~ 5795 | DTS - Digital Transmission System | ||
81 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
82 | 2012-05-31 | 5755 ~ 5795 | DTS - Digital Transmission System | |
83 | 5510 ~ 5670 | NII - Unlicensed National Information Infrastructure TX | ||
84 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
85 | 2012-05-13 | 5755 ~ 5795 | DTS - Digital Transmission System | |
86 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
87 | 5510 ~ 5670 | NII - Unlicensed National Information Infrastructure TX | ||
88 | 2012-05-08 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | |
89 | 5755 ~ 5795 | DTS - Digital Transmission System | ||
90 | 5510 ~ 5670 | NII - Unlicensed National Information Infrastructure TX | ||
91 | 2012-03-15 | 5755 ~ 5795 | DTS - Digital Transmission System | |
92 | 5510 ~ 5670 | NII - Unlicensed National Information Infrastructure TX | ||
93 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
94 | 2012-02-03 | JBP - Part 15 Class B Computing Device Peripheral | Original Equipment | |
95 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
96 | 5755 ~ 5795 | DTS - Digital Transmission System | ||
97 | 5510 ~ 5670 | NII - Unlicensed National Information Infrastructure TX |
Applicant Information | ||||||
---|---|---|---|---|---|---|
Effective |
2016-07-11
|
|||||
2015-11-16
|
||||||
2014-12-09
|
||||||
2014-11-26
|
||||||
2014-03-03
|
||||||
2013-12-16
|
||||||
2013-09-20
|
||||||
2013-07-04
|
||||||
2013-06-18
|
||||||
2013-06-13
|
||||||
2013-06-11
|
||||||
2013-06-04
|
||||||
2013-06-03
|
||||||
2013-04-15
|
||||||
2013-04-03
|
||||||
2013-03-20
|
||||||
2013-03-13
|
||||||
2013-02-21
|
||||||
2012-12-31
|
||||||
2012-12-23
|
||||||
2012-12-21
|
||||||
2012-12-20
|
||||||
2012-12-17
|
||||||
2012-11-22
|
||||||
2012-11-14
|
||||||
2012-11-13
|
||||||
2012-06-26
|
||||||
2012-06-08
|
||||||
2012-05-31
|
||||||
2012-05-13
|
||||||
2012-05-08
|
||||||
2012-03-15
|
||||||
2012-02-03
|
||||||
Applicant's complete, legal business name |
Qualcomm Atheros, Inc.
|
|||||
FCC Registration Number (FRN) |
0003716743
|
|||||
Physical Address |
1700 Technology Dr
|
|||||
San Jose, CA
|
||||||
San Jose, California 95110
|
||||||
United States
|
||||||
TCB Information | ||||||
TCB Application Email Address |
c******@ccsemc.com
|
|||||
L******@ul.com
|
||||||
L******@ul.com
|
||||||
T******@TIMCOENGR.COM
|
||||||
t******@siemic.com
|
||||||
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|||||
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||||
FCC ID | ||||||
Grantee Code |
PPD
|
|||||
Equipment Product Code |
AR5B22
|
|||||
Person at the applicant's address to receive grant or for contact | ||||||
Name |
P******** G********
|
|||||
Title |
Vice President, Regulatory Engineering
|
|||||
Telephone Number |
858-6********
|
|||||
Fax Number |
858-6********
|
|||||
p******@qti.qualcomm.com
|
||||||
Technical Contact | ||||||
Firm Name |
Bureau Veritas Consumer Products Services
|
|||||
Bureau Veritas Consumer Products Services (H.K.) L
|
||||||
Sporton International Inc.
|
||||||
Bureau Veritas Consumer Products Services (H.K.)
|
||||||
Compliance Certification Services
|
||||||
Name |
M******** T****
|
|||||
J******** T****
|
||||||
A****** H****
|
||||||
A**** Z******
|
||||||
N**** C****
|
||||||
Physical Address |
No.19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dis
|
|||||
No.52, HwaYa 1st Rd., Kwei-Shan Hsiang
|
||||||
No. 19, Hwa Ya 2nd Rd., Kwei Shan Hsiang
|
||||||
47173 Benicia Street
|
||||||
Taoyuan City, 33383
|
||||||
Taoyuan Hsien, 333
|
||||||
Fremont, California 94538
|
||||||
Taiwan
|
||||||
Telephone Number |
+886 ********
|
|||||
886-3******** Extension:
|
||||||
(510)******** Extension:
|
||||||
886 3******** Extension:
|
||||||
Fax Number |
886-3********
|
|||||
88633********
|
||||||
(510)********
|
||||||
886 3********
|
||||||
m******@tw.bureauveritas.com
|
||||||
M******@tw.bureauveritas.com
|
||||||
E******@Sporton.com.tw,IreneChung@Sporton.com.tw
|
||||||
a******@tw.bureauveritas.com
|
||||||
a******@ccsemc.com
|
||||||
n******@tw.bureauveritas.com
|
||||||
Non Technical Contact | ||||||
Firm Name |
Bureau Veritas Consumer Products Services
|
|||||
Bureau Veritas Consumer Products Services (H.K.) L
|
||||||
Sporton International Inc.
|
||||||
Bureau Veritas Consumer Products Services (H.K.)
|
||||||
Compliance Certification Services
|
||||||
Name |
M**** M******
|
|||||
M**** T****
|
||||||
J**** T******
|
||||||
A****** H******
|
||||||
A******** Z******
|
||||||
Physical Address |
No.19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dis
|
|||||
No.52, HwaYa 1st Rd., Kwei-Shan Hsiang
|
||||||
No. 19, Hwa Ya 2nd Rd., Kwei Shan Hsiang
|
||||||
47173 Benicia Street
|
||||||
Taoyuan City, 33383
|
||||||
Taoyuan Hsien, 94538
|
||||||
Taoyuan Hsien, 333
|
||||||
Fremont, California 94538
|
||||||
Taiwan
|
||||||
Telephone Number |
+886 ********
|
|||||
886-3********
|
||||||
(510)******** Extension:
|
||||||
Fax Number |
886-3********
|
|||||
88633********
|
||||||
(510)********
|
||||||
m******@tw.bureauveritas.com
|
||||||
M******@tw.bureauveritas.com
|
||||||
E******@Sporton.com.tw,IreneChung@Sporton.com.tw
|
||||||
a******@tw.bureauveritas.com
|
||||||
a******@ccsemc.com
|
||||||
Confidentiality (long or short term) | ||||||
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | |||||
Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | |||||
No | ||||||
If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 01/06/2017 | |||||
01/07/2017 | ||||||
12/31/2015 | ||||||
12/31/2014 | ||||||
01/10/2015 | ||||||
04/17/2014 | ||||||
11/04/2013 | ||||||
12/15/2013 | ||||||
12/10/2013 | ||||||
12/08/2013 | ||||||
07/19/2013 | ||||||
07/18/2013 | ||||||
09/15/2013 | ||||||
09/30/2013 | ||||||
06/30/2013 | ||||||
03/30/2013 | ||||||
05/22/2013 | ||||||
06/29/2013 | ||||||
02/06/2013 | ||||||
06/01/2013 | ||||||
01/31/2013 | ||||||
05/19/2013 | ||||||
05/12/2013 | ||||||
07/01/2012 | ||||||
11/27/2012 | ||||||
11/08/2012 | ||||||
11/04/2012 | ||||||
09/11/2012 | ||||||
02/10/2012 | ||||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
Cognitive Radio & Software Defined Radio, Class, etc | ||||||
Is this application for software defined/cognitive radio authorization? | No | |||||
Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | |||||
NII - Unlicensed National Information Infrastructure TX | ||||||
DTS - Digital Transmission System | ||||||
JBP - Part 15 Class B Computing Device Peripheral | ||||||
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | PCIE 802.11a/b/g/n 2.4GHz/5GHz + USB BT 4.0 card | |||||
PCIE 802.11a/b/g/n 2.4GHz/5GHz + USB BT card | ||||||
PCIE 802.11a/b/g/n 2.4GHz/5GHz+USB BT 4.0 CARD | ||||||
PCIE 802.11a/b/g/n 2.4GHz/5GHz + USB BT 4.0 Card | ||||||
802.11 a/b/g/n 2.4GHz/5GHz + USB 4.0 card | ||||||
Tablet PC | ||||||
PCIe 802.11 abgn & USB BT Module | ||||||
PCIe 802.11 abgn + USB BT Module | ||||||
PCIE 802.11A/B/G/N 2.4GHZ/5GHZ+USB BT 4.0 CARD | ||||||
PCIE 802.11a/b/g/n 2.4GHz/5Ghz + USB BT 4.0 card | ||||||
PCIE 802.11A/B/G/N 2.4GHZ/5GHZ + USB BT 4.0 CARD | ||||||
Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | |||||
Modular Equipment Type | Single Modular Approval | |||||
Does not apply | ||||||
Purpose / Application is for | Class II Permissive Change | |||||
Class II permissive change or modification of presently authorized equipment | ||||||
Original Equipment | ||||||
Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | |||||
Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | |||||
Yes | ||||||
Grant Comments | Class II permissive change to add Dell N01PC host computer and antennas as described in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 20 cm from all persons. | |||||
Class II permissive change to add Dell N01PC host computer and antennas as described in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Operations in 5.15-5.25 GHz and 5.47-5.725 GHz bands are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 20 cm from all persons. | ||||||
Class II permissive change to add Dell N02PC host computer and antennas as described in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Operations in 5.15-5.25 GHz and 5.47-5.725 GHz bands are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 20 cm from all persons. | ||||||
Class II permissive change to add Dell N01PC host computer and antennas as described in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 20 cm from all persons. | ||||||
Class II permissive change to add Dell N02PC host computer and antennas as described in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 20 cm from all persons. | ||||||
Class II permissive change to add Dell N02PC host computer and antennas as described in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 20 cm from all persons. | ||||||
Class II permissive change to show compliance with New U-NII-3 sub band rule per FCC ET docket No. 13-49. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Operations in 5.15-5.25 GHz and 5.47-5.725 GHz bands are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. | ||||||
Class II permissive change to add KDB 616217 SAR modular approval for 5mm separation distance with the antenna and reduced power settings as described in this filing. Installation is limited to tablets where the antenna to enclosure distance is at least 10mm and in the display or keyboard section of laptops/notebooks/netbooks where the antenna-to-user distance is at least 5mm. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Operations in 5.15-5.25 GHz band is for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest reported SAR values for body-worn and simultaneous transmission exposure conditions are 0.78 W/Kg and 0.90 W/Kg. | ||||||
Class II permissive change to add KDB 616217 SAR modular approval for 5mm separation distance with the antenna and reduced power settings as described in this filing. Installation is limited to tablets where the antenna to enclosure distance is at least 10mm and in the display or keyboard section of laptops/notebooks/netbooks where the antenna-to-user distance is at least 5mm. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest reported SAR values for body-worn and simultaneous transmission exposure conditions are 0.78 W/Kg and 0.90 W/Kg. | ||||||
Class II permissive change to add KDB 616217 SAR modular approval for 5mm separation distance with the antenna and reduced power settings as described in this filing. Installation is limited to tablets where the antenna to enclosure distance is at least 10mm and in the display or keyboard section of laptops/notebooks/netbooks where the antenna-to-user distance is at least 5mm. Output power is conducted. | ||||||
Class II permissive change to add portable use condition and antenna in specific host tablet as described in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Operations in 5.15-5.25 GHz band is for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest reported SAR value is 0.77 W/Kg. | ||||||
Class II permissive change to add portable use condition and antenna in specific host tablet as described in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest reported SAR value is 1.39 W/Kg. | ||||||
Class II permissive change to add portable use condition and antenna in specific host tablet as described in this filing. Output power is conducted. | ||||||
Class II permissive change to allow installation into Lenovo Miix 211 Tablet PC with the antennas and configuration described in this filing. Power reduction is needed in this host for portable category configuration. Output power listed is conducted. Operations in 5.15-5.25 GHz and 5.47-5.725 GHz bands are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2 cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3 cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest reported SAR is 1.46W/kg. | ||||||
Class II permissive change to allow installation into Lenovo Miix 211 Tablet PC with the antennas and configuration described in this filing. Output power listed is conducted. | ||||||
Class II permissive change to allow installation into the Lenovo Series of Notebooks (20267xxxxxx, 80B0xxxxxx, IdeaPad U330pxxxxxx) with the antennas and reduced output power documented in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Operations in 5.15-5.25 GHz band is for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna (s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest stand-alone modular SAR with separations described above is 0.35 W/Kg. The highest reported SAR value across all filings under this FCC ID is 1.53 W/kg. The highest reported SAR value under this filing is 0.88 W/Kg. | ||||||
Class II permissive change to allow installation into the Lenovo Series of Notebooks (20267xxxxxx, 80B0xxxxxx, IdeaPad U330pxxxxxx) with the antennas and reduced output power documented in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest standalone modular SAR with separations described above is 0.16W/Kg. The highest reported SAR value across all filings under this FCC ID is 1.13 W/kg. The highest reported SAR value under this filing is 0.62 W/Kg. | ||||||
Class II permissive change to allow installation into the Lenovo Series of Notebooks (20267xxxxxx, 80B0xxxxxx, IdeaPad U330pxxxxxx) with the antennas and configuration described in this filing. Output power listed is conducted. | ||||||
Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Operations in 5.15-5.25 GHz and 5.47-5.725 GHz bands are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2 cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3 cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest stand-alone modular SAR with separations described above is 0.35 W/kg. (Original Grant Notes 02/03/2012) This Class II permissive change is to establish the most conservative antenna-to-user separation distance of 9.8 mm for portable configurations. The antenna(s) used for this device must be installed to provide a separation distance of at least 9.8 mm from all persons and the separation distance between the main and auxiliary antennas shall be at least 5.6 cm when positioned horizontally. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to KDB 616217 D04. Separate approval is required for all other operating configurations, including different antenna configurations. The highest reported SAR value for stand-alone and simultaneous transmission conditions are 0.69W/kg and 0.76W/kg, respectively. | ||||||
Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest reported SAR value is 0.16W/Kg. (Original Grant Notes 02/03/2012) This Class II permissive change is to establish the most conservative antenna-to-user separation distance of 9.8 mm for portable configurations. The antenna(s) used for this device must be installed to provide a separation distance of at least 9.8 mm from all persons and the separation distance between the main and auxiliary antennas shall be at least 5.6 cm when positioned horizontally. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to KDB 616217 D04. Separate approval is required for all other operating configurations, including different antenna configurations. The highest reported SAR value for stand-alone and simultaneous transmission conditions are 0.72W/kg and 0.79W/kg, respectively. | ||||||
Output power is conducted. (Original Grant Notes 02/03/2012) This Class II permissive change is to establish the most conservative antenna-to-user separation distance of 9.8 mm for portable configurations. The antenna(s) used for this device must be installed to provide a separation distance of at least 9.8 mm from all persons and the separation distance between the main and auxiliary antennas shall be at least 5.6 cm when positioned horizontally. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to KDB 616217 D04. Separate approval is required for all other operating configurations, including different antenna configurations. | ||||||
Class II permissive change to add dipole antenna type that described in this filing. The dipole antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest stand-alone modular SAR of antenna with separations described above is 0.16W/Kg. | ||||||
Class II permissive change to add dipole antenna type that described in this filing. Output power is conducted. | ||||||
Class II permissive change to add dipole antenna type that described in this filing. The dipole antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Operations in 5.15-5.25 GHz band is for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest stand-alone modular SAR of antenna with separations described above is 0.35 W/Kg. | ||||||
Class II permissive change to add the specific portable laptop PC configuration with antenna and reduce output power per manufactory level as documented in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest stand-alone modular SAR with separations described above is 0.16W/Kg. The highest reported SAR value across all filings under this FCC ID is 1.13 W/kg. The highest reported SAR value under this filing is 0.61 W/Kg. | ||||||
Class II permissive change to add the specific portable laptop PC configuration with antenna and configuration described in this filing. Output power listed is conducted. | ||||||
Class II permissive change to add the specific portable laptop PC configuration with antenna and reduce output power per manufactory level as documented in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Operations in 5.15-5.25 GHz band is for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest stand-alone modular SAR with separations described above is 0.35 W/Kg. The highest reported SAR value across all filings under this FCC ID is 1.53 W/kg. The highest reported SAR value under this filing is 0.38 W/Kg. | ||||||
Class II permissive change to add the specific portable tablet configuration with antenna and configuration described in this filing. Output power listed is conducted. | ||||||
Class II permissive change to add the specific portable laptop PC configuration with antenna and reduce output power per manufactory level as documented in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Operations in 5.15-5.25 GHz band is for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest stand-alone modular SAR with separations described above is 0.35 W/Kg. The highest reported SAR value across all filings under this FCC ID is 1.53 W/kg. The highest reported SAR value under this filing is 0.69 W/Kg. | ||||||
Class II permissive change to add the specific portable laptop PC configuration with antenna and reduce output power per manufactory level as documented in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest stand-alone modular SAR with separations described above is 0.16W/Kg. The highest reported SAR value across all filings under this FCC ID is 1.13 W/kg. The highest reported SAR value under this filing is 0.27 W/Kg. | ||||||
Class II permissive change to add the specific portable laptop PC with antenna and configuration described in this filing. Output power listed is conducted. | ||||||
Class II permissive change to add the specific portable laptop PC configuration with antenna and reduce output power per manufactory level as documented in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest stand-alone modular SAR with separations described above is 0.16W/Kg. The highest reported SAR value across all filings under this FCC ID is 1.13 W/kg. The highest reported SAR value under this filing is 0.31 W/Kg. | ||||||
Class II permissive change to add the specific portable laptop PC configuration with antenna and reduce output power per manufactory level as documented in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest stand-alone modular SAR with separations described above is 0.16W/Kg. The highest reported SAR value across all filings under this FCC ID is 1.13 W/kg. The highest reported SAR value under this filing is 0.25 W/Kg. | ||||||
Class II permissive change to add the specific portable laptop PC configuration with antenna and reduce output power per manufactory level as documented in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Operations in 5.15-5.25 GHz band is for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest stand-alone modular SAR with separations described above is 0.35 W/Kg. The highest reported SAR value across all filings under this FCC ID is 1.53 W/kg. The highest reported SAR value under this filing is 0.61 W/Kg. | ||||||
Class II permissive change to add the specific portable tablet PC configuration with antenna and configuration described in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest stand-alone modular SAR with separations described above is 0.16W/Kg. The highest reported SAR value across all filings under this FCC ID is 1.13 W/kg. The highest reported SAR value under this filing is 0.35 W/Kg. | ||||||
Class II permissive change to add the specific portable tablet PC configuration with antenna and configuration described in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Operations in 5.15-5.25 GHz band is for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest stand-alone modular SAR with separations described above is 0.35 W/Kg. The highest reported SAR value across all filings under this FCC ID is 1.53 W/kg. The highest reported SAR value under this filing is 0.32 W/Kg. | ||||||
Class II permissive change to add the specific portable tablet PC configuration with antenna and configuration described in this filing. Output power is conducted. | ||||||
Class II permissive change to add the specific portable tablet PC configuration with antenna and configuration described in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest stand-alone modular SAR with separations described above is 0.16W/Kg. The highest reported SAR value across all filings under this FCC ID is 1.13 W/kg. The highest reported SAR value under this filing is 0.72 W/Kg. | ||||||
Class II permissive change to add the specific portable tablet PC configuration with antenna and configuration described in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Operations in 5.15-5.25 GHz band is for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest stand-alone modular SAR with separations described above is 0.35 W/Kg. The highest reported SAR value across all filings under this FCC ID is 1.53 W/kg. The highest reported SAR value under this filing is 1.34 W/Kg. | ||||||
Power listed is conducted. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. | ||||||
Class II Permissive Change to add specific portable host configuration. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Operations in 5.15-5.25 GHz and 5.47-5.725 GHz bands are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically unless additional SAR evaluation is performed to allow use at with smaller separation. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 documentation. The highest reported SAR value across all filings under this FCC ID is 1.53 W/kg. The highest reported SAR value for this filing is 1.42 W/Kg. | ||||||
Class II Permissive Change to add specific portable host configuration. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically unless additional SAR evaluation is performed to allow use at with smaller separation. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 documentation. The highest reported SAR value across all filings under this FCC ID is 1.13 W/kg. The highest reported SAR value for this filing is 0.90 W/Kg. | ||||||
Class II permissive change to add the specific portable tablet PC configuration with antenna and configuration described in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest stand-alone modular SAR with separations described above is 0.16W/Kg. The highest reported SAR value across all filings under this FCC ID is 1.13 W/kg. The highest reported SAR value under this filing is 1.04 W/Kg. | ||||||
Class II permissive change to add the specific portable tablet PC configuration with antenna and configuration described in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Operations in 5.15-5.25 GHz and 5.47-5.725 GHz bands are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest stand-alone modular SAR with separations described above is 0.35 W/Kg. The highest reported SAR value across all filings under this FCC ID is 1.53 W/kg. The highest reported SAR value under this filing is 1.48 W/Kg. | ||||||
Class II permissive change to change BoM of passive matching components that described in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest stand-alone modular SAR with separations described above is 0.16W/Kg. | ||||||
Class II permissive change to change BoM of passive matching components that described in this filing. Output power is conducted. | ||||||
Class II permissive change to change BoM of passive matching components that described in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Operations in 5.15-5.25 GHz and 5.47-5.725 GHz bands are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest stand-alone modular SAR with separations described above is 0.35 W/Kg. | ||||||
Class II permissive change to add the metal shielding at module that described in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Operations in 5.15-5.25 GHz and 5.47-5.725 GHz bands are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest stand-alone modular SAR with separations described above is 0.35 W/Kg. | ||||||
Class II permissive change to add the metal shielding at module that described in this filing. Output power is conducted. | ||||||
Class II permissive change to add the metal shielding at module that described in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest stand-alone modular SAR with separations described above is 0.16W/Kg. | ||||||
Class II permissive change to add the specific portable notebook/laptop configuration with antenna and configuration described in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest stand-alone modular SAR with separations described above is 0.16W/Kg. The highest reported SAR value across all filings under this FCC ID is 1.13 W/kg. The highest reported SAR value under this filing is 0.40 W/Kg. | ||||||
Class II permissive change to add the specific portable notebook/laptop configuration with antenna and configuration described in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Operations in 5.15-5.25 GHz and 5.47-5.725 GHz bands are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest stand-alone modular SAR with separations described above is 0.35 W/Kg. The highest reported SAR value across all filings under this FCC ID is 1.53 W/kg. The highest reported SAR value under this filing is 0.70 W/Kg. | ||||||
Class II permissive change to add the specific portable notebook/laptop configuration with antenna and configuration described in this filing. Output power is conducted. | ||||||
Class II permissive change to add the specific portable notebook/laptop configuration with antenna and configuration described in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Operations in 5.15-5.25 GHz and 5.47-5.725 GHz bands are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest stand-alone modular SAR with separations described above is 0.35 W/Kg. The highest reported SAR value across all filings under this FCC ID is 1.53 W/kg. The highest reported SAR value under this filing is 1.00 W/Kg. | ||||||
Class II permissive change to add the specific portable notebook/laptop configuration with antenna and configuration described in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest stand-alone modular SAR with separations described above is 0.16W/Kg. The highest reported SAR value across all filings under this FCC ID is 1.13 W/kg. The highest reported SAR value under this filing is 0.46 W/Kg. | ||||||
Class II permissive change to add the specific portable notebook/laptop configuration with antenna and configuration described in this filing. Output power is conducted. | ||||||
Class II permissive change to add portable use condition in specific host laptop/tablet as described in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Operations in 5.15-5.25 GHz and 5.47-5.725 GHz bands are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. For Modular Approvals the antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest reported SAR value is 1.37 W/Kg. The highest measured SAR value across all filings under this FCC ID is 1.53 W/Kg. | ||||||
Class II permissive change to add portable use condition in specific host laptop/tablet as described in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. For Modular Approvals the antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest reported SAR value is 0.13 W/Kg. The highest measured SAR value across all filings under this FCC ID is 1.45 W/Kg. | ||||||
Class II Permissive Change. Output power is conducted. | ||||||
Class II permissive change. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Operations in 5.15-5.25 GHz and 5.47-5.725 GHz bands are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2 cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3 cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest stand-alone modular SAR with separations described above is 0.35 W/kg. The highest measured SAR value across all filings for other configurations under this FCC ID is 1.53 W/Kg. | ||||||
Class II Permissive Change. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2 cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3 cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest stand-alone modular SAR with separations described above is 0.16 W/kg. The highest reported SAR value across all filings for other configurations under this FCCID is 1.45 W/Kg. | ||||||
C2PC for portable Host , Pegatron GT101C Output power is conducted. | ||||||
C2PC for portable Host , Pegatron GT101C Highest reported SAR is 0.27 W/kg Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest reported SAR value is 0.16W/Kg. | ||||||
C2PC for portable Host , Pegatron GT101C Highest reported SAR is 0.72 W/kg Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Operations in 5.15-5.25 GHz and 5.47-5.725 GHz bands are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest reported SAR value is 0.35W/Kg. | ||||||
C2PC for portable Host , Acer Aspire M3 series (M3-581T , M3-581TG) Output power is conducted.. | ||||||
C2PC for portable Host , Acer Aspire M3 series (M3-581T , M3-581TG) Highest reported SAR is 1.08 W/kg Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Operations in 5.15-5.25 GHz and 5.47-5.725 GHz bands are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest reported SAR value is 0.35W/Kg. | ||||||
C2PC for portable Host , Acer Aspire M3 series (M3-581T , M3-581TG) Highest reported SAR is 1.13 W/kg Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest reported SAR value is 0.16W/Kg. | ||||||
Class II permissive change to add portable use condition in specific host laptop as described in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Operations in 5.15-5.25 GHz and 5.47-5.725 GHz bands are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest reported SAR value is 0.6 W/Kg. The highest measured SAR value across all filings under this FCC ID is 1.53 W/Kg. | ||||||
Class II permissive change to add portable use condition in specific host laptop as described in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest reported SAR value is 0.12 W/Kg. The highest measured SAR value across all filings under this FCC ID is 1.45 W/Kg. | ||||||
Class II permissive change to add portable use condition in specific host laptop as described in this filing. Output power is conducted. | ||||||
Class II permissive change filing to add LNA to RX chains as documented in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Operations in 5.15-5.25 GHz and 5.47-5.725 GHz bands are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest measured SAR value across all filings under this FCC ID is 1.53W/Kg. | ||||||
Class II permissive change filing to add LNA to RX chains as documented in this filing. Output power is conducted. | ||||||
Class II permissive change filing to add LNA to RX chains as documented in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest measured SAR value across all filings under this FCC ID is 1.45W/Kg. | ||||||
Class II permissive change to add portable use condition in specific host PC as described in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Operations in 5.15-5.25 GHz and 5.47-5.725 GHz bands are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest reported SAR value is 1.53W/Kg. The highest measured SAR value across all filings under this FCC ID is 1.53W/Kg. | ||||||
Class II permissive change to add portable use condition in specific host PC as described in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest reported SAR value is 1.45W/Kg. The highest measured SAR value across all filings under this FCC ID is 1.45W/Kg. | ||||||
Class II permissive change to add portable use condition in specific host PC as described in this filing. Output power listed is conducted. | ||||||
Class II permissive change to add the specific portable notebook host documented in this filing. Power listed is conducted. This module may be installed only by the OEM or an OEM integrator. Compliance of this device in all final product configurations is the responsibility of the Grantee. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. Only antenna(s) documented under this FCC ID number may be used with this transmitter. OEM/Host integrator is responsible for complying with the instructions and requirements for each individual transmitter they choose to incorporate into a host product. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The highest measured under this filing is 0.71 W/kg. The highest measured SAR value across all filings under this FCC ID is 0.71W/Kg. | ||||||
Class II Permissive Change to add the specific portable notebook host described in this filing. This device is a Client Device without Radar detection. Power listed is conducted. This module may only be installed by the OEM or an OEM integrator. Compliance of this device in all final product configurations is the responsibility of the Grantee. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. Only antenna(s) documented under this FCC ID number may be used with this transmitter. OEM/Host integrator is responsible for complying with the instructions and requirements for each individual transmitter they choose to incorporate into a host product. Operations in 5.15-5.25 GHz and 5.47-5.725 GHz bands are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The highest measured SAR under this filing is 1.17 W/kg. The highest measured SAR value across all filings under this FCC ID is 1.17W/Kg. | ||||||
Class II permissive change to add the specific portable notebook host described in this filing. Power listed is conducted. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. | ||||||
Class II permissive change to add portable use condition in specific host laptop as described in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest reported SAR value is 0.42W/Kg. The highest measured SAR value across all filings under this FCC ID is 0.42W/Kg. | ||||||
Class II permissive change to add portable use condition in specific host laptop as described in this filing. Output power listed is conducted. | ||||||
Class II permissive change to add portable use condition in specific host laptop as described in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Operations in 5.15-5.25 GHz and 5.47-5.725 GHz bands are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure ompliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest reported SAR value is 0.71W/Kg. The highest measured SAR value across all filings under this FCC ID is 1.17W/Kg. | ||||||
Class II permissive change to add portable use condition in specific host laptop as described in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest reported SAR value is 0.23W/Kg. The highest measured SAR value across all filings under this FCC ID is 0.23W/Kg. | ||||||
Class II permissive change to add portable use condition in specific host laptop as described in this filing. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Operations in 5.15-5.25 GHz and 5.47-5.725 GHz bands are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest reported SAR value is 1.17W/Kg. The highest measured SAR value across all filings under this FCC ID is 1.17W/Kg. | ||||||
Class II Permissive Change to add specific portable notebook configuration. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. SAR compliance for specific-host portable use conditions has been evaluated as described in this permissive change filing; the highest reported SAR values is 0.37 W/kg. | ||||||
Class II Permissive Change to add specific portable notebook configuration. This device is a Client Device without Radar detection. Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Operations in 5.15-5.25 GHz and 5.47-5.725 GHz bands are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. SAR compliance for specific-host portable use conditions has been evaluated as described in this permissive change filing; the highest reported SAR values is 1.01 W/kg. | ||||||
Class II Permissive Change to add specific portable notebook configuration. Output power is conducted. | ||||||
Output power is conducted. | ||||||
Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest reported SAR value is 0.16W/Kg. | ||||||
Output power is conducted. This module may only be installed by the OEM or an OEM integrator. Operations in 5.15-5.25 GHz and 5.47-5.725 GHz bands are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this device must be installed to provide a separation distance of at least 2cm from all persons, and the separation distance between the main and auxiliary antennas shall be at least 3cm when positioned horizontally or vertically. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. The highest reported SAR value is 0.35W/Kg. | ||||||
Is there an equipment authorization waiver associated with this application? | No | |||||
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | |||||
Test Firm Name and Contact Information | ||||||
Firm Name |
Bureau Veritas CPS(H.K.) Ltd., Taoyuan Branch
|
|||||
Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch
|
||||||
Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch
|
||||||
Sporton International Inc.
|
||||||
Compliance Certification Services Inc.
|
||||||
Bay Area Compliance Laboratories Corp. (Dongguan)
|
||||||
A Test Lab Techno Corp.
|
||||||
Sporton International Inc
|
||||||
SPORTON International Inc.
|
||||||
DEKRA Testing and Certification Co., Ltd.
|
||||||
SGS TAIWAN LTD.
|
||||||
Compliance Certification Services (UL CCS)
|
||||||
Name |
E**** L******
|
|||||
K******** L******
|
||||||
R**** C********
|
||||||
A******** C****
|
||||||
H**** L********
|
||||||
J****** C********
|
||||||
J**** L****
|
||||||
S****** H********
|
||||||
N****** B****
|
||||||
B******** J****
|
||||||
K**** L********
|
||||||
Telephone Number |
+886-********
|
|||||
+886-******** Extension:
|
||||||
886-3******** Extension:
|
||||||
886-3******** Extension:
|
||||||
886-2******** Extension:
|
||||||
86-76******** Extension:
|
||||||
886-3********
|
||||||
886-2******** Extension:
|
||||||
886-2******** Extension:
|
||||||
88633******** Extension:
|
||||||
886-2******** Extension:
|
||||||
+886-******** Extension:
|
||||||
510-7********
|
||||||
Fax Number |
+886-********
|
|||||
+886-********
|
||||||
886 3********
|
||||||
886-3********
|
||||||
886-3********
|
||||||
886-2********
|
||||||
886-3********
|
||||||
886-2********
|
||||||
886-2********
|
||||||
886-2********
|
||||||
88632********
|
||||||
886-2********
|
||||||
+886-********
|
||||||
510-6********
|
||||||
e******@tw.bureauveritas.com
|
||||||
k******@tw.bureauveritas.com
|
||||||
r******@tw.bureauveritas.com
|
||||||
a******@sporton.com.tw
|
||||||
h******@sgs.com
|
||||||
j******@baclcorp.com
|
||||||
J******@atl-lab.com.tw
|
||||||
s******@quietek.com
|
||||||
n******@sgs.com
|
||||||
b******@ccsemc.com
|
||||||
k******@sporton.com.tw
|
||||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0050000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.03 | |||||||||||||||||||||||||||||||||||
2 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.045 | |||||||||||||||||||||||||||||||||||
2 | 3 | 15E | 38 CC MO ND | 5260 | 5320 | 0.1 | |||||||||||||||||||||||||||||||||||
2 | 4 | 15E | 38 CC MO ND | 5270 | 5310 | 0.063 | |||||||||||||||||||||||||||||||||||
2 | 5 | 15E | 38 CC MO ND | 5500 | 5700 | 0.072 | |||||||||||||||||||||||||||||||||||
2 | 6 | 15E | 38 CC MO ND | 5510 | 5670 | 0.063 | |||||||||||||||||||||||||||||||||||
2 | 7 | 15E | 38 CC MO | 5745 | 5825 | 0.037 | |||||||||||||||||||||||||||||||||||
2 | 8 | 15E | 38 CC MO | 5755 | 5795 | 0.053 | |||||||||||||||||||||||||||||||||||
2 | 9 | 15E | 38 CC MO | 5775 | 5775 | 0.052 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.03 | |||||||||||||||||||||||||||||||||||
3 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.045 | |||||||||||||||||||||||||||||||||||
3 | 3 | 15E | 38 CC MO ND | 5260 | 5320 | 0.1 | |||||||||||||||||||||||||||||||||||
3 | 4 | 15E | 38 CC MO ND | 5270 | 5310 | 0.063 | |||||||||||||||||||||||||||||||||||
3 | 5 | 15E | 38 CC MO ND | 5500 | 5700 | 0.072 | |||||||||||||||||||||||||||||||||||
3 | 6 | 15E | 38 CC MO ND | 5510 | 5670 | 0.063 | |||||||||||||||||||||||||||||||||||
3 | 7 | 15E | 38 CC MO | 5745 | 5825 | 0.037 | |||||||||||||||||||||||||||||||||||
3 | 8 | 15E | 38 CC MO | 5755 | 5795 | 0.053 | |||||||||||||||||||||||||||||||||||
3 | 9 | 15E | 38 CC MO | 5775 | 5775 | 0.052 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
4 | 1 | 15C | CC MO | 2402 | 2480 | 0.003 | |||||||||||||||||||||||||||||||||||
4 | 2 | 15C | CC MO | 2412 | 2462 | 0.479 | |||||||||||||||||||||||||||||||||||
4 | 3 | 15C | CC MO | 2422 | 2452 | 0.311 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
5 | 1 | 15C | CC MO | 2402 | 2480 | 0.003 | |||||||||||||||||||||||||||||||||||
5 | 2 | 15C | CC MO | 2412 | 2462 | 0.479 | |||||||||||||||||||||||||||||||||||
5 | 3 | 15C | CC MO | 2422 | 2452 | 0.311 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
6 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0050000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
7 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.03 | |||||||||||||||||||||||||||||||||||
7 | 2 | 15E | 38 CC MO | 5190 | 5230 | 0.045 | |||||||||||||||||||||||||||||||||||
7 | 3 | 15E | 38 CC MO ND | 5260 | 5320 | 0.1 | |||||||||||||||||||||||||||||||||||
7 | 4 | 15E | 38 CC MO ND | 5270 | 5310 | 0.063 | |||||||||||||||||||||||||||||||||||
7 | 5 | 15E | 38 CC MO ND | 5500 | 5700 | 0.072 | |||||||||||||||||||||||||||||||||||
7 | 6 | 15E | 38 CC MO ND | 5510 | 5670 | 0.063 | |||||||||||||||||||||||||||||||||||
7 | 7 | 15E | 38 CC MO | 5745 | 5825 | 0.037 | |||||||||||||||||||||||||||||||||||
7 | 8 | 15E | 38 CC MO | 5755 | 5795 | 0.053 | |||||||||||||||||||||||||||||||||||
7 | 9 | 15E | 36 CC MO | 5775 | 5775 | 0.052 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
8 | 1 | 15E | CC MO | 5180 | 5240 | 0.03 | |||||||||||||||||||||||||||||||||||
8 | 2 | 15E | CC MO | 5190 | 5230 | 0.045 | |||||||||||||||||||||||||||||||||||
8 | 3 | 15E | CC MO ND | 5260 | 5320 | 0.1 | |||||||||||||||||||||||||||||||||||
8 | 4 | 15E | CC MO ND | 5270 | 5310 | 0.063 | |||||||||||||||||||||||||||||||||||
8 | 5 | 15E | CC MO ND | 5500 | 5700 | 0.072 | |||||||||||||||||||||||||||||||||||
8 | 6 | 15E | CC MO ND | 5510 | 5670 | 0.063 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
9 | 1 | 15C | CC | 2402 | 2480 | 0.003 | |||||||||||||||||||||||||||||||||||
9 | 2 | 15C | CC MO | 2412 | 2462 | 0.479 | |||||||||||||||||||||||||||||||||||
9 | 3 | 15C | CC MO | 2422 | 2452 | 0.311 | |||||||||||||||||||||||||||||||||||
9 | 4 | 15C | CC MO | 5745 | 5825 | 0.218 | |||||||||||||||||||||||||||||||||||
9 | 5 | 15C | CC MO | 5755 | 5795 | 0.214 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
10 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0050000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
11 | 1 | 15E | CC MO | 5180 | 5240 | 0.03 | |||||||||||||||||||||||||||||||||||
11 | 2 | 15E | CC MO | 5190 | 5230 | 0.045 | |||||||||||||||||||||||||||||||||||
11 | 3 | 15E | CC MO ND | 5260 | 5320 | 0.1 | |||||||||||||||||||||||||||||||||||
11 | 4 | 15E | CC MO ND | 5270 | 5310 | 0.063 | |||||||||||||||||||||||||||||||||||
11 | 5 | 15E | CC MO ND | 5500 | 5700 | 0.072 | |||||||||||||||||||||||||||||||||||
11 | 6 | 15E | CC MO ND | 5510 | 5670 | 0.063 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
12 | 1 | 15C | CC | 2402 | 2480 | 0.003 | |||||||||||||||||||||||||||||||||||
12 | 2 | 15C | CC MO | 2412 | 2462 | 0.479 | |||||||||||||||||||||||||||||||||||
12 | 3 | 15C | CC MO | 2422 | 2452 | 0.311 | |||||||||||||||||||||||||||||||||||
12 | 4 | 15C | CC MO | 5745 | 5825 | 0.218 | |||||||||||||||||||||||||||||||||||
12 | 5 | 15C | CC MO | 5755 | 5795 | 0.214 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
13 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0050000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
14 | 1 | 15E | 36 CC MO | 5180 | 5240 | 0.03 | |||||||||||||||||||||||||||||||||||
14 | 2 | 15E | 36 CC MO | 5190 | 5230 | 0.045 | |||||||||||||||||||||||||||||||||||
14 | 3 | 15E | 36 CC MO | 5260 | 5320 | 0.1 | |||||||||||||||||||||||||||||||||||
14 | 4 | 15E | 36 CC MO | 5270 | 5310 | 0.063 | |||||||||||||||||||||||||||||||||||
14 | 5 | 15E | 36 CC MO | 5500 | 5700 | 0.072 | |||||||||||||||||||||||||||||||||||
14 | 6 | 15E | 36 CC MO | 5510 | 5670 | 0.063 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
15 | 1 | 15C | CC | 2402 | 2480 | 0.003 | |||||||||||||||||||||||||||||||||||
15 | 2 | 15C | 36 CC MO | 2412 | 2462 | 0.479 | |||||||||||||||||||||||||||||||||||
15 | 3 | 15C | 36 CC MO | 2422 | 2452 | 0.311 | |||||||||||||||||||||||||||||||||||
15 | 4 | 15C | 36 CC MO | 5745 | 5825 | 0.218 | |||||||||||||||||||||||||||||||||||
15 | 5 | 15C | 36 CC MO | 5755 | 5795 | 0.214 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
16 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0050000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
17 | 1 | 15E | 36 CC | 5180 | 5240 | 0.03 | |||||||||||||||||||||||||||||||||||
17 | 2 | 15E | 36 CC MO | 5190 | 5230 | 0.045 | |||||||||||||||||||||||||||||||||||
17 | 3 | 15E | 36 CC | 5260 | 5320 | 0.1 | |||||||||||||||||||||||||||||||||||
17 | 4 | 15E | 36 CC MO | 5270 | 5310 | 0.063 | |||||||||||||||||||||||||||||||||||
17 | 5 | 15E | 36 CC | 5500 | 5700 | 0.072 | |||||||||||||||||||||||||||||||||||
17 | 6 | 15E | 36 CC MO | 5510 | 5670 | 0.063 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
18 | 1 | 15C | CC | 2402 | 2480 | 0.003 | |||||||||||||||||||||||||||||||||||
18 | 2 | 15C | 36 CC MO | 2412 | 2462 | 0.479 | |||||||||||||||||||||||||||||||||||
18 | 3 | 15C | 36 CC MO | 2422 | 2452 | 0.311 | |||||||||||||||||||||||||||||||||||
18 | 4 | 15C | 36 CC MO | 5745 | 5825 | 0.218 | |||||||||||||||||||||||||||||||||||
18 | 5 | 15C | 36 CC MO | 5755 | 5795 | 0.214 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
19 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0050000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
20 | 1 | 15E | CC MO | 5180 | 5240 | 0.03 | |||||||||||||||||||||||||||||||||||
20 | 2 | 15E | CC MO | 5190 | 5230 | 0.045 | |||||||||||||||||||||||||||||||||||
20 | 3 | 15E | CC MO ND | 5260 | 5320 | 0.1 | |||||||||||||||||||||||||||||||||||
20 | 4 | 15E | CC MO ND | 5270 | 5310 | 0.063 | |||||||||||||||||||||||||||||||||||
20 | 5 | 15E | CC MO ND | 5500 | 5700 | 0.072 | |||||||||||||||||||||||||||||||||||
20 | 6 | 15E | CC MO ND | 5510 | 5670 | 0.063 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
21 | 1 | 15C | CC | 2402 | 2480 | 0.003 | |||||||||||||||||||||||||||||||||||
21 | 2 | 15C | CC MO | 2412 | 2462 | 0.479 | |||||||||||||||||||||||||||||||||||
21 | 3 | 15C | CC MO | 2422 | 2452 | 0.311 | |||||||||||||||||||||||||||||||||||
21 | 4 | 15C | CC MO | 5745 | 5825 | 0.218 | |||||||||||||||||||||||||||||||||||
21 | 5 | 15C | CC MO | 5755 | 5795 | 0.214 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
22 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0050000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
23 | 1 | 15C | CC | 2402 | 2480 | 0.003 | |||||||||||||||||||||||||||||||||||
23 | 2 | 15C | CC MO | 2412 | 2462 | 0.479 | |||||||||||||||||||||||||||||||||||
23 | 3 | 15C | CC MO | 2422 | 2452 | 0.311 | |||||||||||||||||||||||||||||||||||
23 | 4 | 15C | CC MO | 5745 | 5825 | 0.218 | |||||||||||||||||||||||||||||||||||
23 | 5 | 15C | CC MO | 5755 | 5795 | 0.214 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
24 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0050000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
25 | 1 | 15E | CC MO | 5180 | 5240 | 0.03 | |||||||||||||||||||||||||||||||||||
25 | 2 | 15E | CC MO | 5190 | 5230 | 0.045 | |||||||||||||||||||||||||||||||||||
25 | 3 | 15E | CC MO ND | 5260 | 5320 | 0.1 | |||||||||||||||||||||||||||||||||||
25 | 4 | 15E | CC MO ND | 5270 | 5310 | 0.063 | |||||||||||||||||||||||||||||||||||
25 | 5 | 15E | CC MO ND | 5500 | 5700 | 0.072 | |||||||||||||||||||||||||||||||||||
25 | 6 | 15E | CC MO ND | 5510 | 5670 | 0.063 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
26 | 1 | 15C | CC | 2402 | 2480 | 0.003 | |||||||||||||||||||||||||||||||||||
26 | 2 | 15C | 36 CC MO | 2412 | 2462 | 0.479 | |||||||||||||||||||||||||||||||||||
26 | 3 | 15C | 36 CC MO | 2422 | 2452 | 0.311 | |||||||||||||||||||||||||||||||||||
26 | 4 | 15C | 36 CC MO | 5745 | 5825 | 0.218 | |||||||||||||||||||||||||||||||||||
26 | 5 | 15C | 36 CC M4 | 5755 | 5795 | 0.214 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
27 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0050000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
28 | 1 | 15E | 36 CC MO | 5180 | 5240 | 0.03 | |||||||||||||||||||||||||||||||||||
28 | 2 | 15E | 36 CC MO | 5190 | 5230 | 0.045 | |||||||||||||||||||||||||||||||||||
28 | 3 | 15E | 36 CC MO ND | 5260 | 5320 | 0.1 | |||||||||||||||||||||||||||||||||||
28 | 4 | 15E | 36 CC MO | 5270 | 5310 | 0.063 | |||||||||||||||||||||||||||||||||||
28 | 5 | 15E | 36 CC MO ND | 5500 | 5700 | 0.072 | |||||||||||||||||||||||||||||||||||
28 | 6 | 15E | 36 CC MO ND | 5510 | 5670 | 0.063 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
29 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0050000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
30 | 1 | 15E | 36 CC MO | 5180 | 5240 | 0.03 | |||||||||||||||||||||||||||||||||||
30 | 2 | 15E | 36 CC MO | 5190 | 5230 | 0.045 | |||||||||||||||||||||||||||||||||||
30 | 3 | 15E | 36 CC MO ND | 5260 | 5320 | 0.1 | |||||||||||||||||||||||||||||||||||
30 | 4 | 15E | 36 CC MO ND | 5270 | 5310 | 0.063 | |||||||||||||||||||||||||||||||||||
30 | 5 | 15E | 36 CC MO ND | 5500 | 5700 | 0.072 | |||||||||||||||||||||||||||||||||||
30 | 6 | 15E | 36 CC MO ND | 5510 | 5670 | 0.063 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
31 | 1 | 15C | CC | 2402 | 2480 | 0.003 | |||||||||||||||||||||||||||||||||||
31 | 2 | 15C | 36 CC MO | 2412 | 2462 | 0.479 | |||||||||||||||||||||||||||||||||||
31 | 3 | 15C | 36 CC MO | 2422 | 2452 | 0.311 | |||||||||||||||||||||||||||||||||||
31 | 4 | 15C | 36 CC MO | 5745 | 5825 | 0.218 | |||||||||||||||||||||||||||||||||||
31 | 5 | 15C | 36 CC MO | 5755 | 5795 | 0.214 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
32 | 1 | 15E | 36 CC MO | 5180 | 5240 | 0.03 | |||||||||||||||||||||||||||||||||||
32 | 2 | 15E | 36 CC MO | 5190 | 5230 | 0.045 | |||||||||||||||||||||||||||||||||||
32 | 3 | 15E | 36 CC MO ND | 5260 | 5320 | 0.1 | |||||||||||||||||||||||||||||||||||
32 | 4 | 15E | 36 CC MO ND | 5270 | 5310 | 0.063 | |||||||||||||||||||||||||||||||||||
32 | 5 | 15E | 36 CC MO ND | 5500 | 5700 | 0.072 | |||||||||||||||||||||||||||||||||||
32 | 6 | 15E | 36 CC MO ND | 5510 | 5670 | 0.063 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
33 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0050000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
34 | 1 | 15C | CC | 2402 | 2480 | 0.003 | |||||||||||||||||||||||||||||||||||
34 | 2 | 15C | 36 CC MO | 2412 | 2462 | 0.479 | |||||||||||||||||||||||||||||||||||
34 | 3 | 15C | 36 CC MO | 2422 | 2452 | 0.311 | |||||||||||||||||||||||||||||||||||
34 | 4 | 15C | 36 CC MO | 5745 | 5825 | 0.218 | |||||||||||||||||||||||||||||||||||
34 | 5 | 15C | 36 CC MO | 5755 | 5795 | 0.214 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
35 | 1 | 15C | CC | 2402 | 2480 | 0.003 | |||||||||||||||||||||||||||||||||||
35 | 2 | 15C | 36 CC MO | 2412 | 2462 | 0.479 | |||||||||||||||||||||||||||||||||||
35 | 3 | 15C | 36 CC MO | 2422 | 2452 | 0.311 | |||||||||||||||||||||||||||||||||||
35 | 4 | 15C | 36 CC MO | 5745 | 5825 | 0.218 | |||||||||||||||||||||||||||||||||||
35 | 5 | 15C | 36 CC MO | 5755 | 5795 | 0.214 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
36 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0050000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
37 | 1 | 15E | 36 CC MO | 5180 | 5240 | 0.03 | |||||||||||||||||||||||||||||||||||
37 | 2 | 15E | 36 CC MO | 5190 | 5230 | 0.045 | |||||||||||||||||||||||||||||||||||
37 | 3 | 15E | 36 CC MO ND | 5260 | 5320 | 0.1 | |||||||||||||||||||||||||||||||||||
37 | 4 | 15E | 36 CC MO ND | 5270 | 5310 | 0.063 | |||||||||||||||||||||||||||||||||||
37 | 5 | 15E | 36 CC MO ND | 5500 | 5700 | 0.072 | |||||||||||||||||||||||||||||||||||
37 | 6 | 15E | 36 CC MO ND | 5510 | 5670 | 0.063 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
38 | 1 | 15C | CC | 2402 | 2480 | 0.003 | |||||||||||||||||||||||||||||||||||
38 | 2 | 15C | CC MO | 2412 | 2462 | 0.479 | |||||||||||||||||||||||||||||||||||
38 | 3 | 15C | CC MO | 2422 | 2452 | 0.311 | |||||||||||||||||||||||||||||||||||
38 | 4 | 15C | CC MO | 5745 | 5825 | 0.218 | |||||||||||||||||||||||||||||||||||
38 | 5 | 15C | CC MO | 5755 | 5795 | 0.214 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
39 | 1 | 15E | CC MO | 5180 | 5240 | 0.03 | |||||||||||||||||||||||||||||||||||
39 | 2 | 15E | CC MO | 5190 | 5230 | 0.045 | |||||||||||||||||||||||||||||||||||
39 | 3 | 15E | CC MO ND | 5260 | 5320 | 0.1 | |||||||||||||||||||||||||||||||||||
39 | 4 | 15E | CC MO ND | 5270 | 5310 | 0.063 | |||||||||||||||||||||||||||||||||||
39 | 5 | 15E | CC MO ND | 5500 | 5700 | 0.072 | |||||||||||||||||||||||||||||||||||
39 | 6 | 15E | CC MO ND | 5510 | 5670 | 0.063 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
40 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0050000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
41 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0050000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
42 | 1 | 15C | CC | 2402 | 2480 | 0.003 | |||||||||||||||||||||||||||||||||||
42 | 2 | 15C | CC MO | 2412 | 2462 | 0.479 | |||||||||||||||||||||||||||||||||||
42 | 3 | 15C | CC MO | 2422 | 2452 | 0.311 | |||||||||||||||||||||||||||||||||||
42 | 4 | 15C | CC MO | 5745 | 5825 | 0.218 | |||||||||||||||||||||||||||||||||||
42 | 5 | 15C | CC MO | 5755 | 5795 | 0.214 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
43 | 1 | 15E | CC MO | 5180 | 5240 | 0.03 | |||||||||||||||||||||||||||||||||||
43 | 2 | 15E | CC MO | 5190 | 5230 | 0.045 | |||||||||||||||||||||||||||||||||||
43 | 3 | 15E | CC MO ND | 5260 | 5320 | 0.1 | |||||||||||||||||||||||||||||||||||
43 | 4 | 15E | CC MO ND | 5270 | 5310 | 0.063 | |||||||||||||||||||||||||||||||||||
43 | 5 | 15E | CC MO ND | 5500 | 5700 | 0.072 | |||||||||||||||||||||||||||||||||||
43 | 6 | 15E | CC MO ND | 5510 | 5670 | 0.063 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
44 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0050000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
45 | 1 | 15E | CC MO | 5180 | 5240 | 0.03 | |||||||||||||||||||||||||||||||||||
45 | 2 | 15E | CC MO | 5190 | 5230 | 0.045 | |||||||||||||||||||||||||||||||||||
45 | 3 | 15E | CC MO ND | 5260 | 5320 | 0.1 | |||||||||||||||||||||||||||||||||||
45 | 4 | 15E | CC MO ND | 5270 | 5310 | 0.063 | |||||||||||||||||||||||||||||||||||
45 | 5 | 15E | CC MO ND | 5500 | 5700 | 0.072 | |||||||||||||||||||||||||||||||||||
45 | 6 | 15E | CC MO ND | 5510 | 5670 | 0.063 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
46 | 1 | 15C | CC MO | 2412 | 2462 | 0.479 | |||||||||||||||||||||||||||||||||||
46 | 2 | 15C | CC MO | 2422 | 2452 | 0.311 | |||||||||||||||||||||||||||||||||||
46 | 3 | 15C | CC MO | 5745 | 5825 | 0.218 | |||||||||||||||||||||||||||||||||||
46 | 4 | 15C | CC MO | 5755 | 5795 | 0.214 | |||||||||||||||||||||||||||||||||||
46 | 5 | 15C | CC | 2402 | 2480 | 0.003 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
47 | 1 | 15C | CC | 2402 | 2480 | 0.003 | |||||||||||||||||||||||||||||||||||
47 | 2 | 15C | CC MO | 2412 | 2462 | 0.479 | |||||||||||||||||||||||||||||||||||
47 | 3 | 15C | CC MO | 2422 | 2452 | 0.311 | |||||||||||||||||||||||||||||||||||
47 | 4 | 15C | CC MO | 5745 | 5825 | 0.218 | |||||||||||||||||||||||||||||||||||
47 | 5 | 15C | CC MO | 5755 | 5795 | 0.214 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
48 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0050000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
49 | 1 | 15E | CC MO | 5180 | 5240 | 0.03 | |||||||||||||||||||||||||||||||||||
49 | 2 | 15E | CC MO | 5190 | 5230 | 0.045 | |||||||||||||||||||||||||||||||||||
49 | 3 | 15E | CC MO ND | 5260 | 5320 | 0.1 | |||||||||||||||||||||||||||||||||||
49 | 4 | 15E | CC MO ND | 5270 | 5310 | 0.063 | |||||||||||||||||||||||||||||||||||
49 | 5 | 15E | CC MO ND | 5500 | 5700 | 0.072 | |||||||||||||||||||||||||||||||||||
49 | 6 | 15E | CC MO ND | 5510 | 5670 | 0.063 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
50 | 1 | 15C | CC | 2402 | 2480 | 0.003 | |||||||||||||||||||||||||||||||||||
50 | 2 | 15C | CC MO | 2412 | 2462 | 0.479 | |||||||||||||||||||||||||||||||||||
50 | 3 | 15C | CC MO | 2422 | 2452 | 0.311 | |||||||||||||||||||||||||||||||||||
50 | 4 | 15C | CC MO | 5745 | 5825 | 0.218 | |||||||||||||||||||||||||||||||||||
50 | 5 | 15C | CC MO | 5755 | 5795 | 0.214 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
51 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0050000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
52 | 1 | 15E | CC MO | 5180 | 5240 | 0.03 | |||||||||||||||||||||||||||||||||||
52 | 2 | 15E | CC MO | 5190 | 5230 | 0.045 | |||||||||||||||||||||||||||||||||||
52 | 3 | 15E | CC MO ND | 5260 | 5320 | 0.1 | |||||||||||||||||||||||||||||||||||
52 | 4 | 15E | CC MO ND | 5270 | 5310 | 0.063 | |||||||||||||||||||||||||||||||||||
52 | 5 | 15E | CC MO ND | 5500 | 5700 | 0.072 | |||||||||||||||||||||||||||||||||||
52 | 6 | 15E | CC MO ND | 5510 | 5670 | 0.063 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
53 | 1 | 15E | CC MO | 5180 | 5240 | 0.03 | |||||||||||||||||||||||||||||||||||
53 | 2 | 15E | CC MO | 5190 | 5230 | 0.045 | |||||||||||||||||||||||||||||||||||
53 | 3 | 15E | CC MO ND | 5260 | 5320 | 0.1 | |||||||||||||||||||||||||||||||||||
53 | 4 | 15E | CC MO ND | 5270 | 5310 | 0.063 | |||||||||||||||||||||||||||||||||||
53 | 5 | 15E | CC MO ND | 5500 | 5700 | 0.072 | |||||||||||||||||||||||||||||||||||
53 | 6 | 15E | CC MO ND | 5510 | 5670 | 0.063 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
54 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0050000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
55 | 1 | 15C | CC | 2402 | 2480 | 0.003 | |||||||||||||||||||||||||||||||||||
55 | 2 | 15C | CC MO | 2412 | 2462 | 0.479 | |||||||||||||||||||||||||||||||||||
55 | 3 | 15C | CC MO | 2422 | 2452 | 0.311 | |||||||||||||||||||||||||||||||||||
55 | 4 | 15C | CC MO | 5745 | 5825 | 0.218 | |||||||||||||||||||||||||||||||||||
55 | 5 | 15C | CC MO | 5755 | 5795 | 0.214 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
56 | 1 | 15C | CC | 2402 | 2480 | 0.003 | |||||||||||||||||||||||||||||||||||
56 | 2 | 15C | CC MO | 2412 | 2462 | 0.479 | |||||||||||||||||||||||||||||||||||
56 | 3 | 15C | CC MO | 2422 | 2452 | 0.311 | |||||||||||||||||||||||||||||||||||
56 | 4 | 15C | CC MO | 5745 | 5825 | 0.218 | |||||||||||||||||||||||||||||||||||
56 | 5 | 15C | CC MO | 5755 | 5795 | 0.214 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
57 | 1 | 15E | CC MO | 5180 | 5240 | 0.03 | |||||||||||||||||||||||||||||||||||
57 | 2 | 15E | CC MO | 5190 | 5230 | 0.045 | |||||||||||||||||||||||||||||||||||
57 | 3 | 15E | CC MO ND | 5260 | 5320 | 0.1 | |||||||||||||||||||||||||||||||||||
57 | 4 | 15E | CC MO ND | 5270 | 5310 | 0.063 | |||||||||||||||||||||||||||||||||||
57 | 5 | 15E | CC MO ND | 5500 | 5700 | 0.072 | |||||||||||||||||||||||||||||||||||
57 | 6 | 15E | CC MO ND | 5510 | 5670 | 0.063 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
58 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0050000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
59 | 1 | 15E | CC MO | 5180 | 5240 | 0.03 | |||||||||||||||||||||||||||||||||||
59 | 2 | 15E | CC MO | 5190 | 5230 | 0.045 | |||||||||||||||||||||||||||||||||||
59 | 3 | 15E | CC MO ND | 5260 | 5320 | 0.1 | |||||||||||||||||||||||||||||||||||
59 | 4 | 15E | CC MO ND | 5270 | 5310 | 0.063 | |||||||||||||||||||||||||||||||||||
59 | 5 | 15E | CC MO ND | 5500 | 5700 | 0.072 | |||||||||||||||||||||||||||||||||||
59 | 6 | 15E | CC MO ND | 5510 | 5670 | 0.063 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
60 | 1 | 15C | CC | 2402 | 2480 | 0.003 | |||||||||||||||||||||||||||||||||||
60 | 2 | 15C | CC MO | 2412 | 2462 | 0.479 | |||||||||||||||||||||||||||||||||||
60 | 3 | 15C | CC MO | 2422 | 2452 | 0.311 | |||||||||||||||||||||||||||||||||||
60 | 4 | 15C | CC MO | 5745 | 5825 | 0.218 | |||||||||||||||||||||||||||||||||||
60 | 5 | 15C | CC MO | 5755 | 5795 | 0.214 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
61 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0050000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
62 | 1 | 15E | CC MO | 5180 | 5240 | 0.03 | |||||||||||||||||||||||||||||||||||
62 | 2 | 15E | CC MO | 5190 | 5230 | 0.045 | |||||||||||||||||||||||||||||||||||
62 | 3 | 15E | CC MO ND | 5260 | 5320 | 0.1 | |||||||||||||||||||||||||||||||||||
62 | 4 | 15E | CC MO ND | 5270 | 5310 | 0.063 | |||||||||||||||||||||||||||||||||||
62 | 5 | 15E | CC MO ND | 5500 | 5700 | 0.072 | |||||||||||||||||||||||||||||||||||
62 | 6 | 15E | CC MO ND | 5510 | 5670 | 0.063 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
63 | 1 | 15C | CC | 2402 | 2480 | 0.003 | |||||||||||||||||||||||||||||||||||
63 | 2 | 15C | CC MO | 2412 | 2462 | 0.479 | |||||||||||||||||||||||||||||||||||
63 | 3 | 15C | CC MO | 2422 | 2452 | 0.311 | |||||||||||||||||||||||||||||||||||
63 | 4 | 15C | CC MO | 5745 | 5825 | 0.218 | |||||||||||||||||||||||||||||||||||
63 | 5 | 15C | CC MO | 5755 | 5795 | 0.214 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
64 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0050000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
65 | 1 | 15E | CC MO ND | 5180 | 5240 | 0.03 | |||||||||||||||||||||||||||||||||||
65 | 2 | 15E | CC MO ND | 5190 | 5230 | 0.045 | |||||||||||||||||||||||||||||||||||
65 | 3 | 15E | CC MO ND | 5260 | 5320 | 0.1 | |||||||||||||||||||||||||||||||||||
65 | 4 | 15E | CC MO ND | 5270 | 5310 | 0.063 | |||||||||||||||||||||||||||||||||||
65 | 5 | 15E | CC MO ND | 5500 | 5700 | 0.072 | |||||||||||||||||||||||||||||||||||
65 | 6 | 15E | CC MO ND | 5510 | 5670 | 0.063 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
66 | 1 | 15C | CC | 2402 | 2480 | 0.003 | |||||||||||||||||||||||||||||||||||
66 | 2 | 15C | CC MO | 2412 | 2462 | 0.479 | |||||||||||||||||||||||||||||||||||
66 | 3 | 15C | CC MO | 2422 | 2452 | 0.311 | |||||||||||||||||||||||||||||||||||
66 | 4 | 15C | CC MO | 5745 | 5825 | 0.218 | |||||||||||||||||||||||||||||||||||
66 | 5 | 15C | CC MO | 5755 | 5795 | 0.214 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
67 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0050000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
68 | 1 | 15C | CC | 2402 | 2480 | 0.003 | |||||||||||||||||||||||||||||||||||
68 | 2 | 15C | CC MO | 2412 | 2462 | 0.479 | |||||||||||||||||||||||||||||||||||
68 | 3 | 15C | CC MO | 2422 | 2452 | 0.311 | |||||||||||||||||||||||||||||||||||
68 | 4 | 15C | CC MO | 5745 | 5825 | 0.218 | |||||||||||||||||||||||||||||||||||
68 | 5 | 15C | CC MO | 5755 | 5795 | 0.214 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
69 | 1 | 15E | CC MO | 5180 | 5240 | 0.03 | |||||||||||||||||||||||||||||||||||
69 | 2 | 15E | CC MO | 5190 | 5230 | 0.045 | |||||||||||||||||||||||||||||||||||
69 | 3 | 15E | CC MO ND | 5260 | 5320 | 0.1 | |||||||||||||||||||||||||||||||||||
69 | 4 | 15E | CC MO ND | 5270 | 5310 | 0.063 | |||||||||||||||||||||||||||||||||||
69 | 5 | 15E | CC MO ND | 5500 | 5700 | 0.072 | |||||||||||||||||||||||||||||||||||
69 | 6 | 15E | CC MO ND | 5510 | 5670 | 0.063 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
70 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0050000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
71 | 1 | 15E | CC MO | 5180 | 5240 | 0.03 | |||||||||||||||||||||||||||||||||||
71 | 2 | 15E | CC MO | 5190 | 5230 | 0.045 | |||||||||||||||||||||||||||||||||||
71 | 3 | 15E | CC MO ND | 5260 | 5320 | 0.1 | |||||||||||||||||||||||||||||||||||
71 | 4 | 15E | CC MO ND | 5270 | 5310 | 0.063 | |||||||||||||||||||||||||||||||||||
71 | 5 | 15E | CC MO ND | 5500 | 5700 | 0.072 | |||||||||||||||||||||||||||||||||||
71 | 6 | 15E | CC MO ND | 5510 | 5670 | 0.063 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
72 | 1 | 15C | CC | 2402 | 2480 | 0.003 | |||||||||||||||||||||||||||||||||||
72 | 2 | 15C | CC MO | 2412 | 2462 | 0.479 | |||||||||||||||||||||||||||||||||||
72 | 3 | 15C | CC MO | 2422 | 2452 | 0.311 | |||||||||||||||||||||||||||||||||||
72 | 4 | 15C | CC MO | 5745 | 5825 | 0.218 | |||||||||||||||||||||||||||||||||||
72 | 5 | 15C | CC MO | 5755 | 5795 | 0.214 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
73 | 1 | 15E | CC MO | 5180 | 5240 | 0.03 | |||||||||||||||||||||||||||||||||||
73 | 2 | 15E | CC MO | 5190 | 5230 | 0.045 | |||||||||||||||||||||||||||||||||||
73 | 3 | 15E | CC MO ND | 5260 | 5320 | 0.1 | |||||||||||||||||||||||||||||||||||
73 | 4 | 15E | CC MO ND | 5270 | 5310 | 0.063 | |||||||||||||||||||||||||||||||||||
73 | 5 | 15E | CC MO ND | 5500 | 5700 | 0.072 | |||||||||||||||||||||||||||||||||||
73 | 6 | 15E | CC MO ND | 5510 | 5670 | 0.063 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
74 | 1 | 15C | CC | 2402 | 2480 | 0.003 | |||||||||||||||||||||||||||||||||||
74 | 2 | 15C | CC MO | 2412 | 2462 | 0.479 | |||||||||||||||||||||||||||||||||||
74 | 3 | 15C | CC MO | 2422 | 2452 | 0.311 | |||||||||||||||||||||||||||||||||||
74 | 4 | 15C | CC MO | 5745 | 5825 | 0.218 | |||||||||||||||||||||||||||||||||||
74 | 5 | 15C | CC MO | 5755 | 5795 | 0.214 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
75 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0050000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
76 | 1 | 15E | CC MO | 5180 | 5240 | 0.03 | |||||||||||||||||||||||||||||||||||
76 | 2 | 15E | CC MO | 5190 | 5230 | 0.045 | |||||||||||||||||||||||||||||||||||
76 | 3 | 15E | CC MO ND | 5260 | 5320 | 0.1 | |||||||||||||||||||||||||||||||||||
76 | 4 | 15E | CC MO ND | 5270 | 5310 | 0.063 | |||||||||||||||||||||||||||||||||||
76 | 5 | 15E | CC MO ND | 5500 | 5700 | 0.072 | |||||||||||||||||||||||||||||||||||
76 | 6 | 15E | CC MO ND | 5510 | 5670 | 0.063 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
77 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0050000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
78 | 1 | 15C | CC | 2402 | 2480 | 0.003 | |||||||||||||||||||||||||||||||||||
78 | 2 | 15C | CC MO | 2412 | 2462 | 0.479 | |||||||||||||||||||||||||||||||||||
78 | 3 | 15C | CC MO | 2422 | 2452 | 0.311 | |||||||||||||||||||||||||||||||||||
78 | 4 | 15C | CC MO | 5745 | 5825 | 0.218 | |||||||||||||||||||||||||||||||||||
78 | 5 | 15C | CC MO | 5755 | 5795 | 0.214 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
79 | 1 | 15E | CC MO | 5180 | 5240 | 0.03 | |||||||||||||||||||||||||||||||||||
79 | 2 | 15E | CC MO | 5190 | 5230 | 0.045 | |||||||||||||||||||||||||||||||||||
79 | 3 | 15E | CC MO ND | 5260 | 5320 | 0.1 | |||||||||||||||||||||||||||||||||||
79 | 4 | 15E | CC MO ND | 5270 | 5310 | 0.063 | |||||||||||||||||||||||||||||||||||
79 | 5 | 15E | CC MO ND | 5500 | 5700 | 0.072 | |||||||||||||||||||||||||||||||||||
79 | 6 | 15E | CC MO ND | 5510 | 5670 | 0.063 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
80 | 1 | 15C | CC | 2402 | 2480 | 0.003 | |||||||||||||||||||||||||||||||||||
80 | 2 | 15C | CC MO | 2412 | 2462 | 0.479 | |||||||||||||||||||||||||||||||||||
80 | 3 | 15C | CC MO | 2422 | 2452 | 0.311 | |||||||||||||||||||||||||||||||||||
80 | 4 | 15C | CC MO | 5745 | 5825 | 0.218 | |||||||||||||||||||||||||||||||||||
80 | 5 | 15C | CC MO | 5755 | 5795 | 0.214 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
81 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0050000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
82 | 1 | 15C | CC | 2402 | 2480 | 0.003 | |||||||||||||||||||||||||||||||||||
82 | 2 | 15C | CC MO | 2412 | 2462 | 0.479 | |||||||||||||||||||||||||||||||||||
82 | 3 | 15C | CC MO | 2422 | 2452 | 0.311 | |||||||||||||||||||||||||||||||||||
82 | 4 | 15C | CC MO | 5745 | 5825 | 0.218 | |||||||||||||||||||||||||||||||||||
82 | 5 | 15C | CC MO | 5755 | 5795 | 0.214 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
83 | 1 | 15E | CC MO | 5180 | 5240 | 0.03 | |||||||||||||||||||||||||||||||||||
83 | 2 | 15E | CC MO | 5190 | 5230 | 0.045 | |||||||||||||||||||||||||||||||||||
83 | 3 | 15E | CC MO ND | 5260 | 5320 | 0.1 | |||||||||||||||||||||||||||||||||||
83 | 4 | 15E | CC MO ND | 5270 | 5310 | 0.063 | |||||||||||||||||||||||||||||||||||
83 | 5 | 15E | CC MO ND | 5500 | 5700 | 0.072 | |||||||||||||||||||||||||||||||||||
83 | 6 | 15E | CC MO ND | 5510 | 5670 | 0.063 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
84 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0050000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
85 | 1 | 15C | CC | 2402 | 2480 | 0.003 | |||||||||||||||||||||||||||||||||||
85 | 2 | 15C | CC MO | 2412 | 2462 | 0.479 | |||||||||||||||||||||||||||||||||||
85 | 3 | 15C | CC MO | 2422 | 2452 | 0.311 | |||||||||||||||||||||||||||||||||||
85 | 4 | 15C | CC MO | 5745 | 5825 | 0.218 | |||||||||||||||||||||||||||||||||||
85 | 5 | 15C | CC MO | 5755 | 5795 | 0.214 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
86 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0050000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
87 | 1 | 15E | CC MO | 5180 | 5240 | 0.03 | |||||||||||||||||||||||||||||||||||
87 | 2 | 15E | CC MO | 5190 | 5230 | 0.045 | |||||||||||||||||||||||||||||||||||
87 | 3 | 15E | CC MO ND | 5260 | 5320 | 0.1 | |||||||||||||||||||||||||||||||||||
87 | 4 | 15E | CC MO ND | 5270 | 5310 | 0.063 | |||||||||||||||||||||||||||||||||||
87 | 5 | 15E | CC MO ND | 5500 | 5700 | 0.072 | |||||||||||||||||||||||||||||||||||
87 | 6 | 15E | CC MO ND | 5510 | 5670 | 0.063 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
88 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0050000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
89 | 1 | 15C | CC | 2402 | 2480 | 0.003 | |||||||||||||||||||||||||||||||||||
89 | 2 | 15C | CC MO | 2412 | 2462 | 0.479 | |||||||||||||||||||||||||||||||||||
89 | 3 | 15C | CC MO | 2422 | 2452 | 0.311 | |||||||||||||||||||||||||||||||||||
89 | 4 | 15C | CC MO | 5745 | 5825 | 0.218 | |||||||||||||||||||||||||||||||||||
89 | 5 | 15C | CC MO | 5755 | 5795 | 0.214 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
90 | 1 | 15E | CC MO | 5180 | 5240 | 0.03 | |||||||||||||||||||||||||||||||||||
90 | 2 | 15E | CC MO | 5190 | 5230 | 0.045 | |||||||||||||||||||||||||||||||||||
90 | 3 | 15E | CC MO ND | 5260 | 5320 | 0.1 | |||||||||||||||||||||||||||||||||||
90 | 4 | 15E | CC MO ND | 5270 | 5310 | 0.063 | |||||||||||||||||||||||||||||||||||
90 | 5 | 15E | CC MO ND | 5500 | 5700 | 0.072 | |||||||||||||||||||||||||||||||||||
90 | 6 | 15E | CC MO ND | 5510 | 5670 | 0.063 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
91 | 1 | 15C | CC | 2402 | 2480 | 0.003 | |||||||||||||||||||||||||||||||||||
91 | 2 | 15C | CC MO | 2412 | 2462 | 0.479 | |||||||||||||||||||||||||||||||||||
91 | 3 | 15C | CC MO | 2422 | 2452 | 0.311 | |||||||||||||||||||||||||||||||||||
91 | 4 | 15C | CC MO | 5745 | 5825 | 0.218 | |||||||||||||||||||||||||||||||||||
91 | 5 | 15C | CC MO | 5755 | 5795 | 0.214 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
92 | 1 | 15E | CC MO | 5180 | 5240 | 0.03 | |||||||||||||||||||||||||||||||||||
92 | 2 | 15E | CC MO | 5190 | 5230 | 0.045 | |||||||||||||||||||||||||||||||||||
92 | 3 | 15E | CC MO ND | 5260 | 5320 | 0.1 | |||||||||||||||||||||||||||||||||||
92 | 4 | 15E | CC MO ND | 5270 | 5310 | 0.063 | |||||||||||||||||||||||||||||||||||
92 | 5 | 15E | CC MO ND | 5500 | 5700 | 0.072 | |||||||||||||||||||||||||||||||||||
92 | 6 | 15E | CC MO ND | 5510 | 5670 | 0.063 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
93 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0050000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
94 | 1 | 15B | CC | ||||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
95 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0050000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
96 | 1 | 15C | CC | 2402 | 2480 | 0.003 | |||||||||||||||||||||||||||||||||||
96 | 2 | 15C | CC MO | 2412 | 2462 | 0.479 | |||||||||||||||||||||||||||||||||||
96 | 3 | 15C | CC MO | 2422 | 2452 | 0.311 | |||||||||||||||||||||||||||||||||||
96 | 4 | 15C | CC MO | 5745 | 5825 | 0.218 | |||||||||||||||||||||||||||||||||||
96 | 5 | 15C | CC MO | 5755 | 5795 | 0.214 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
97 | 1 | 15E | CC MO | 5180 | 5240 | 0.03 | |||||||||||||||||||||||||||||||||||
97 | 2 | 15E | CC MO | 5190 | 5230 | 0.045 | |||||||||||||||||||||||||||||||||||
97 | 3 | 15E | CC MO ND | 5260 | 5320 | 0.1 | |||||||||||||||||||||||||||||||||||
97 | 4 | 15E | CC MO ND | 5270 | 5310 | 0.063 | |||||||||||||||||||||||||||||||||||
97 | 5 | 15E | CC MO ND | 5500 | 5700 | 0.072 | |||||||||||||||||||||||||||||||||||
97 | 6 | 15E | CC MO ND | 5510 | 5670 | 0.063 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC