Clover One Starter Kit Quick Start Guide We are continuously improving our software. Visit clover.com/setup to get the latest version of this guide. In Europe, visit eu.clover.com/setup About Clover One is a powerful and easy-to-use payment terminal that can also support point-of-sale (POS) functionality. Its integrated hardware lets you take payments, print receipts, scan inventory, and run your day-to-day business operations wherever you are. It connects online by Wi-Fi or 3G, and provides high-level login security through the built-in fingerprint sensor. With its chargeable battery, the Starter Kit allows Clover One to take payments where your customers areat a table in your restaurant or across town at your customers site. Clover One enables secure credit and debit card transactions via EMV chip cards (insert), magstripe cards (swipe) and EMV contactless payments (tap), including Apple Pay and Android Pay. 1 Clover One Starter Kit Quick Start Guide English 2 Clover One Starter Kit Clover One Features Contactless payment reader Power button
& fingerprint sensor Chip card reader Microphone Magstripe card reader Anti-theft security slot Audio jack Barcode scanner Speakers Barcode trigger Receipt paper door Charging pads USB Type-C connector Clover One
(In the device box) Charging cradle Screwdriver Power cord
(2 for EU) Power brick Receipt paper 3 Clover One Starter Kit Quick Start Guide English 4 Set Up your Clover One Recommended Usage Video set up: clover.com/setup EU: eu.clover.com/setup
(Only for EU) Install the micro SIM card. See page 8 for more details. SIM cards have been pre-installed for US. Plug the power brick into the charging cradle and press the cord into the rubber base so that it is flush on the counter. Attach the power cord to the power brick and plug the power cord into a power source. Place the device on the charging cradle. If it's properly connected, a battery icon will appear on the screen. While it charges, press and hold the power button until the Clover logo appears on the screen. Follow the on-screen instructions to continue setting up. 1 2 3 4 5 1 3 2 5 4 5 Clover One Starter Kit Quick Start Guide Hand Holding Position Clover One should be held with the chip-card reader facing toward you and the printer pointed away from you. We recom-
mend holding it with your non-dominant hand and using your dominant hand to tap the screen and take payment. Barcode Scanning Point the scanner toward the barcode on the item or the receipt and hold down the barcode trigger. You will get the best results by holding the device 410 inches (10cm25cm) from the item. Barcode trigger English 6 Payment Methods Clover One SIM Installation Chip Cards Insert the card with the chip end first. Remove the card when prompted by the device, then follow the on-screen instructions. Magstripe Cards Swipe the card with the magstripe facing down. You can swipe the card from right to left or left to right. Contactless Payments Tap chip cards with contactless capabilities, and phones and watches with contactless payments
(including Apple Pay and Android Pay) on the contactless symbol.
(Only for EU) Micro SIM cards are pre-installed for the US First, power off the Clover One device. 7-8 Open the receipt paper door and locate the screws above the serial number (S/N). Use the screwdriver to turn the screws counter-clockwise 78 times; the screws wont fall out. Use your fingernail or screwdriver to pull down black flap. Remove the placeholder or current SIM card from the left tray. Insert your card into the tray with the card meeting the angled edge. Finally, close the flap, tighten the screws, and power on the device. 7 Clover One Starter Kit Quick Start Guide English 8 Applications Useful Resources Clover comes with apps that take payments, run your front of house, and manage your back of house. Go to App Market to browse and install more apps to meet your needs. Sale Enter an amount and take multiple payment types. Refund Refund a payment or an amount directly on a card. Transactions View, search, reprint, and refund transactions. Tips Add paper tips to your credit card payments. Setup Personalize your Clover devices to suit your business. App Market Add features to your devices based on your needs. Web Access Some apps can be accessed via your web browser. Weve put shortcuts to these web pages at clover.com/home. Please use Chrome, Safari, or Firefox. In Europe, visit eu.clover.com/home Need Help?
Visit help.clover.com, use the Help app, or call us anytime at the phone number given in your welcome email. 9 Clover One Starter Kit Quick Start Guide English 10 FCC Part 15 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, (2) This device must accept any interference received, including interference that may cause undesired operation. FCC Part 15 Class B-specific Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Warning Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement The product comply with the FCC portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available. Industry Canada statement:
CAN ICES-3 (B)/NMB-3(B) This device complies with ISEDs licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Le prsent appareil est conforme aux CNR d ISED applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : (1) le dispositif ne doit pas produire de brouillage prjudiciable, et (2) ce dispositif doit accepter tout brouillage reu, y compris un brouillage susceptible de provoquer un fonctionnement indsirable. Caution:
(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;
(ii) the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall be such that the equipment still complies with the e.i.r.p. limit;
(iii) the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits specified for point-to-point and non-point-to-point operation as appropriate; and
(iv) the worst-case tilt angle(s) necessary to remain compliant with the e.i.r.p. elevation mask requirement set forth in Section 6.2.2(3) shall be clearly indicated.
(v) Users should also be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. Avertissement:
Le guide dutilisation des dispositifs pour rseaux locaux doit inclure des instructions prcises sur les restrictions susmentionnes, notamment :
(i) les dispositifs fonctionnant dans la bande 5150-5250 MHz sont rservs uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux;
(ii) le gain maximal d'antenne permis pour les dispositifs utilisant les bandes de 5250 5 350 MHz et de 5470 5725 MHz doit tre conforme la limite de la p.i.r.e;
(iii) le gain maximal d'antenne permis (pour les dispositifs utilisant la bande de 5 725 5 850 MHz) doit tre conforme la limite de la p.i.r.e. spcifie pour l'exploitation point point et lexploitation non point point, selon le cas;
(iv) les pires angles dinclinaison ncessaires pour rester conforme lexigence de la p.i.r.e. applicable au masque dlvation, et nonce la section 6.2.2 3), doivent tre clairement indiqus.
(v) De plus, les utilisateurs devraient aussi tre aviss que les utilisateurs de radars de haute puissance sont dsigns utilisateurs principaux (c.--d., quils ont la priorit) pour les bandes 5250-5350 MHz et 5650-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. Radiation Exposure Statement:
The product complies with the Canada portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available. Dclaration d'exposition aux radiations:
Le produit est conforme aux limites d'exposition pour les appareils portables RF pour les Etats-Unis et le Canada tablies pour un environnement non contrl. Le produit est sr pour un fonctionnement tel que dcrit dans ce manuel. La rduction aux expositions RF peut tre augmente si l'appareil peut tre conserv aussi loin que possible du corps de l'utilisateur ou que le dispositif est rgl sur la puissance de sortie la plus faible si une telle fonction est disponible. v.22 Starter Kit Clover One Model: C401U Waste Electrical and Electronic Equipment-WEEE NOTE: This product is covered electronic equipment under the European Unions Waste from Electrical and Electronic Equipment (WEEE) Directive (2012/19/EU). The WEEE Directive requires that covered equipment be collected and managed separately from typical household waste in all EU member states. Please follow the guidance of your local environmental authority or ask the shop where you purchased the product for collection or recycling options.