all | frequencies |
|
|
exhibits | applications |
---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
Manual 1 | Users Manual | 1.34 MiB | ||||
1 2 |
|
Manual 2 | Users Manual | 613.40 KiB | ||||
1 2 | Attestation Statements | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | External Photos | |||||||
1 2 | Internal Photos | |||||||
1 2 | Internal Photos | |||||||
1 2 | ID Label/Location Info | |||||||
1 2 | ID Label/Location Info | |||||||
1 2 | RF Exposure Info | |||||||
1 2 | RF Exposure Info | |||||||
1 2 | Test Report | |||||||
1 2 | Test Setup Photos |
1 2 | Manual 1 | Users Manual | 1.34 MiB |
TThhiirrdd GGeenneerraattiioonn IInntteell PPoowweerreedd CCllaassssmmaattee PPCC Users Manual Copyright 2008 All Rights Reserved. The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages. This document contains proprietary information protected by copyright. All rights are reserved. No part of this manual may be reproduced by any mechanical, electronic, or other means in any form without prior written permission of the manufacturer. Limitation of Liability While reasonable efforts have been made to ensure the accuracy of this manual, the manufacturer and distributor assume no liability resulting from errors or omissions in this manual, or from the use of the information contained herein. CCoonntteennttss Before You Start .........................................................................................1 Attention: Teachers and Parents.............................................................................1 For Your Safety ...........................................................................................................1 Caring for Your Notebook.......................................................................................2 Regulatory Information ..............................................................................3 Federal Communications Commission Notice.....................................................3 Modifications................................................................................................................3 Connections to Peripheral Devices ........................................................................3 SAR Exposure..............................................................................................................4 Declaration of Conformity .......................................................................................4 European Notice.........................................................................................................4 Attachment Limitations Statement .........................................................................5 Power Cord Requirement ........................................................................................5 Battery Pack Safety .....................................................................................................6 Lithium battery warning / Bridge battery warning ...............................................7 Touring the Notebook................................................................................9 Front..............................................................................................................................9 Left view .................................................................................................................... 10 Right view .................................................................................................................. 11 Back ............................................................................................................................ 12 Base............................................................................................................................. 13 Getting Started .........................................................................................14 Installing the Battery................................................................................................ 14 Charging the Battery............................................................................................... 15 Opening the LCD Panel ......................................................................................... 16 Switching the Power On ........................................................................................ 16 LED Status Indicators.............................................................................................. 18 i Using the Notebook..................................................................................19 Using the Keyboard................................................................................................. 19 Using the Touch Pad ............................................................................................... 20 Using the Touch Screen ......................................................................................... 21 Rotating the Display Panel ..................................................................................... 21 Using the Web Camera.......................................................................................... 24 Conserving the Battery Power ............................................................................. 25 BIOS Setup ................................................................................................26 Entering BIOS Setup................................................................................................ 26 Main Setup................................................................................................................. 26 Advanced Setup........................................................................................................ 27 Security Setup........................................................................................................... 28 Boot Setup................................................................................................................. 29 Exit Setup................................................................................................................... 30 Troubleshooting ........................................................................................31 Specifications .............................................................................................32 Index ...........................................................................................................33 ii BBeeffoorree YYoouu SSttaarrtt Attention: Teachers and Parents This product is an educational tool designed for school age children, ages 6 and up. Make sure that students understand this product is an educational tool and not a toy. Students must be supervised by an adult when using this notebook. Explain to students the safe and proper handling of the notebook, power supply, battery pack, and power cord. Before students take the notebook home, instruct students to keep power cords, small accessories, and loose parts away from younger children at all times. Make sure students understand the warning label on the power cord. Emphasize to students that any damage to the notebook or loose parts should be reported immediately to a teacher or parent. It is recommended that each session of use does not exceed thirty minutes, and that students should take at least a five minute break between each use. To ensure the notebook is in good working condition, periodically inspect the notebook, power supply and power cord for damage, and replace if necessary. For Your Safety Before using in the classroom or home environment, make sure that students understand the following precautions:
Do not drop, crush, or step on the notebook. Do not place objects or apply heavy pressure on the notebook. Do not place on uneven or unstable work surfaces. Do not block the openings provided for ventilation, as overheating may occur. Do not use or store the notebook in extreme weather conditions. Do not expose to sudden changes in temperature or humidity: keep the notebook away from heating and A/C vents. Do not expose to magnetic fields. Do not expose to direct sunlight. Do not place near fire or other sources of heat. 1 Do not expose to rain or moisture. Do not leave the notebook turned on or plugged in when enclosed in a non-
vented container, such as a backpack, as overheating may occur. Caring for Your Notebook Do not spray water or any other cleaning fluids directly on the display. Do not clean the notebook when it is plugged into a wall socket. Make sure the notebook is turned off before cleaning, and clean with a slightly damp cloth. When you are not using the notebook, keep the LCD panel closed to protect the screen from dust. Make sure the touch pad does not come into contact with dirt, liquids, or grease. Use the AC adapter whenever an AC wall outlet is available to prolong the battery life and usage cycle. 2 RReegguullaattoorryy IInnffoorrmmaattiioonn Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to Increase the separation between the equipment and the receiver. which the receiver is connected. Consult the dealer or an experienced radio or television technician for help. A Warning This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by the Manufacturer may void the users authority to operate the equipment. Connections to Peripheral Devices Connections to this device must be made with shielded cables with metallic RFI/EMI connector hoods to maintain compliance with FCC Rules and Regulations. 3 SAR Exposure This device has been tested for compliance with FCC RF Exposure (SAR) limits in typical flat configurations. In order to comply with SAR limits established in the ANSI C95.1 standards, it is recommended when using a CF card that the integrated antenna is positioned more than 1.5cm from your body or nearby persons during extended periods of operation. Declaration of Conformity This device complies with Part 15 the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. European Notice Products with the CE Marking comply with both the EMC Directive
(2004/108/EC) and the Low Voltage Directive (2006/95/EC) and R&TTE Directive (1999/5/EC) issued by the Commission of the European Community. IEC61000-4-2: 2001 ED. 1.2 Compliance with these directives implies conformity to the following European Norms:
EN55022: 2006, CLASS B EN61000-3-2: 2006, CLASS D EN61000-3-3: 1995+A1: 2001+A2: 2005 EN55024: 1998+A1: 2001+A2: 2003 EN 300 328-2, EN 300 328-1, EN 301 489-1, EN 301 489-17 IEC61000-4-11: 2004 ED. 2.0 IEC61000-4-3: 2006 ED. 3.0 IEC61000-4-4: 2004 ED. 2.0 IEC61000-4-5: 2005 ED. 2.0 IEC61000-4-6: 2006 ED. 2.2 IEC61000-4-8: 2001 ED. 1.1
(ETSI 300 328, ETSI 301 489) Electro-magnetic Compatibility and Radio Spectrum Matter. 4 TBR21 (ETSI TBR21) Terminal Equipment. EN60950 (IEC60950) I.T.E. Product Safety Attachment Limitations Statement Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines and internal metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural areas.
Caution Users should not attempt to make such connections themselves, but should contact the appropriate electric inspection authority, or electrician, as appropriate. Power Cord Requirement The power cord supplied with the AC adapter should match the plug and voltage requirements for your local area. Regulatory approval for the AC adapter has been obtained using the power cord for the local area. However, if you travel to a different area and need to connect to a different outlet or voltage, you should use one of the power cords listed below. To purchase a power cord (including one for a country not listed below) or a replacement AC adapter, contact your local dealer. U.S. and Canada The cord set must be UL/ETL-Listed and CSA-Certified or UL/C-ETL Listed. The minimum specifications for the flexible cord are (1) No. 18 AWG, (2) Type SPT-2, and (3) 2-conductor. The cord set must have a rated current capacity of at least 7A. The attachment plug must be an earth-grounding type with a NEMA 1-15P
(7A, 125V) configuration. Japan All components of the cord set (cord, connector, and plug) must bear a PSE mark and registration number in accordance with the Japanese Dentori Law. The minimum specifications for the flexible cord are: (1) 0.75 mm2 conductors, (2) Type VCT or VCTF, and (3) 3-conductor. The cord set must have minimum rated current capacity of 7 A. 5 The attachment plug must be a two-pole, grounded type with a Japanese Industrial Standard C8303 (15 A, 125 VAC) configuration. Other Countries The cord set fittings must bear the certification mark of the agency responsible for evaluation in a specific country. Acceptable agencies are:
CCC (China) The flexible cord must be of a HAR (harmonized) type HO5VVF 3-
conductor cord with a minimum conductor size of 0.03 square inches. The minimum specification for the flexible cord for Class II product are:
(1) 2X0.75 mm2 conductors, (2) 2-conductor cord. The cord set must have a current capacity of at least 10 A and a nominal voltage rating of 125 / 250 VAC. Note:
This model IS DESIGNED TO USE WITH THE FOLLOWING AC ADAPTER MODEL ONLY Manufacture: LI SHIN INTERNATIONAL ENTERPRISE CORP. Manufacture: Delta Battery Pack Safety The battery pack is intended to use only with this notebook. The battery pack is not replaceable by the end user. Only qualified service technicians should replace the battery pack. Do not disassemble the pack. Do not dispose of the battery pack in fire or water. To avoid risk of fire, burns, or damage to your battery pack, do not allow a metal object to touch the battery contacts. Handle a damaged or leaking battery with extreme care. If you come in contact with the electrolyte, wash the exposed area with soap and water. If it contacts the eye, flush the eye with water for 15 minutes and seek medical attention. Do not charge the battery pack if the ambient temperature exceeds 45C
(113F). 6 To obtain a replacement battery, contact your local dealer. Do not expose the battery pack to high storage temperatures (above 60C, 140F). When discarding a battery pack, contact your local waste disposal provider regarding local restrictions on the disposal or recycling of batteries. Use only supplied AC Adapter for charging. Caution:
Vorsicht:
Danger of explosion if battery is incorrectly replaced. Only qualified service technicians should replace and discard the battery pack. Replace only with same or equivalent type recommended by the manufacturer. Discard used batteries according to the manufacturers instructions or local laws. Explisionsgefahr bei unsachgernazen Austausch der Batterie. Ersatz ur durch denselben oder einem vom Hersteller empfohlenem ahnlichen Typ. Entsorgung gebrauchter Batterien navh Angaben des Herstellers. Lithium battery warning / Bridge battery warning This notebook contains a lithium battery to power the clock and calendar circuitry. Caution:
Note:
Vorsicht:
Danger of explosion if battery is replaced incorrectly. Replace only with the same or equivalent type recommended by the manufacturer. Discard used batteries according to the manufacturers instructions. Il y a danger dxplosion sil y a remplacement incorrect de la batterie. Remplacer uniquement avcc unc batterie du meme type ou dun type recommande par le constructer. Mettre au rebut les batteries usages conformement aux instructions du fabricant. Explosionsgefahr bei unsachgemBen Austausch der Batterie Ersatz nur durch denselben oder einem vom Hersteller empfohlenem ahnlichen Typ. Entsorgung gebrauchter Batterien nach Angaben des Herstellers. 7 Der Arbeitsplatzbezogene Schalldruckpegel nach DIN 45 635 betragt 70dB (A) oder weniger. Zum Netzanschlua dieses Gerates ist eine geprufte Leitung zu verwenden. Fur einen Nennstrom bis 6A und einem Gerategewicht groBer 3kg ist eine Leitung nicht leichter als (1) H05VV-F, 3G, 0.75mm2 (2) 2X0.75 mm2 conductors einzusetzen. Die Steckdose muB nahe dem Gerat angebracht und leicht zuganglich sein. Caution:
Vorsicht:
This part is hot. Be careful. Diese Flachewird sehr heiss. When you see this symbol, be careful as this spot may be very hot. The heat is generated from the CPU. 8 TToouurriinngg tthhee NNootteebbooookk
Front 1. Built-in web camera 2. LCD display Stereo speakers 3. 4. Keyboard 5. Touch pad 6. Microphone 7. LED status indicators 8. Bezel button Use the built-in web camera for video conferencing. Contents of the current system operation are displayed here. The stereo speakers allow for audio output. Use the keyboard to enter data. Use the touch pad and two buttons as a mouse. See Using The Touch Pad. The built-in microphone allows the notebook to receive audio input. The operation status of your notebook is displayed here. See System Status Indicators. Press to enter Quick Launcher. Press twice to enter Quick Control Panel. 9
Left view 1. External monitor port 2. USB port 3. Memory card slot 4. Power latch Use this port to connect to an external monitor. Use this port to connect Universal Serial Bus devices. The notebook supports v.2.0 of the USB standard. Insert a memory card into this slot to read the stored data on the notebook. Use this latch to turn your notebook on and off. See Switching the Power On. 10
Right view 1. Stylus pen slot 2. Microphone jack 3. Headphone jack 4. Ventilation opening 5. USB port 6. LAN (RJ-45) port The stylus pen for the touch screen is stored here. Use the microphone jack to connect an external microphone. Use the headphone jack to connect an external headphone set. The ventilation opening allows the notebook to cool off and prevent overheating. Do not block this opening when the notebook is turned on. Use this port to connect Universal Serial Bus devices. The notebook supports v.2.0 of the USB standard. Use this port to connect a standard RJ-45 plug of a router or ADSL modem. 11
Back 1. Power adapter port 2. Handle 3. Name field Connect your AC adapter to this port to power up your notebook and charge the battery pack. Use the handle to carry the notebook. Place your name tag here. 12
Base 1. Battery bay 2. Battery lock switch 3. Battery release latch 4. Ventilation openings The battery pack is stored here. Use the battery lock switch to lock the battery pack in the battery bay. Use the battery release latch to release the battery pack from the battery bay. The ventilation openings allow the notebook to cool off and prevent overheating. Do not block these openings when the notebook is turned on. 13 GGeettttiinngg SSttaarrtteedd Congratulations on your purchase of the third generation Intel powered Classmate PC. Your notebook features a built-in web camera, rotating LCD display panel, and touch screen functions. In this section, you will be introduced to the basic operations of your notebook. Installing the Battery To install the battery pack:
1. Make sure the notebook is turned off. 2. Align and insert the battery pack into the battery bay. The end of the battery pack ridge should align with the dip on the sides of the battery bay. 3. Slide the battery pack down gently but firmly until it locks into place. 4. Slide the battery lock switch left into the locked position. 14 To remove the battery pack:
1. Make sure the notebook is turned off. 2. Slide the battery lock switch left into the unlocked position. 3. Slide and hold the battery release latch, and slide the battery pack up. 4. Align the end of the battery pack ridge with the dip on the sides of the battery bay. 5. Lift and remove the battery.
Note You must charge the battery pack for at least six hours before using it for the first time. Charging the Battery To charge the battery, plug the AC adaptor into the notebook and an electrical outlet. Whenever possible, use the AC adaptor to keep the notebook connected to a power source. For a totally discharged battery, it will take approximately two hours to charge to 90% capacity, and approximately three hours to 100% while the notebook is powered off. It will take about five hours to charge the battery to 100% capacity while the notebook is powered on. If the system runs at heavy loads or in a high temperature environment, the battery may not be fully charged. You need to continue to charge it with the AC adaptor plugged in until the charging LED turns green. Low battery warning: When the battery power is reduced to 10 percent, the battery status LED blinks orange and the system beeps every 16 seconds. Very low battery warning: When the battery power is reduced to five percent, the battery status LED blinks orange and the system beeps every 4 seconds. A Warning
Note Always use the AC adapter and power cord included with this package. Using a replacement may result in damage to your notebook. The system will not charge the battery when the temperature exceeds 40 degrees Celsius. 15 Opening the LCD Panel To open the LCD panel:
1. Steady the base of the notebook with one hand. 2. Hold a corner of the LCD panel with the other hand. 3. Gently raise the LCD panel to the upright position. A Warning
Note Never slam the LCD panel shut, as this may damage the notebook. Do not grip the web camera when trying to open or close the LCD panel. Switching the Power On Once you have connected your AC adapter or charged the battery pack, you can power on your notebook. When you power on your notebook, the Power-On Self Test (POST) runs automatically to check the internal hardware and configuration. After the POST is completed, your notebook loads the installed operating system. If hardware configuration has been changed or the POST fails, a warning message may appear on the screen. This message will inform you of any errors or invalid settings, and prompt you to run the BIOS Setup Utility to correct the problem. 16 To switch the power on:
Slide the power latch towards you and release. To switch the power off:
1. Make sure all applications are turned off. 2. Slide the power latch towards you and release. Never turn the notebook off during the POST, or an unrecoverable error may occur. Never turn the notebook off while the hard disk is in use, or system data may be lost or corrupted. A Warning 17 LED Status Indicators The notebook has LED status indicators on the top of the LCD panel and to the left of the LCD display, allowing you to see the system and power status of your notebook at a glance. Green light indicates the numeric keypad is activated. Green light indicates the caps-lock is activated. Green light indicates the system is reading/writing data. Green light indicates the system is on. Green light indicates the battery is fully charged and the AC adapter is plugged in. Orange light indicates the battery is charging. Blinking orange light indicates the battery power is low. No light indicates the battery pack is not installed in your system. Green light off orange light off green light indicates the battery temperature is too high. Blinking green light indicates WLAN operation in progress. Green light indicates the WLAN is on. 18 UUssiinngg tthhee NNootteebbooookk Using the Keyboard You can use certain key combinations to quickly configure system settings. Graphic symbol Action System control Fn + F1 Fn + F2 Fn + F3 Fn + F4 Fn + F5 Fn + F6 Fn + F7 Fn + F8 Fn + F11 Fn + F12 Fn + Ins (PrtSc) Turn the WLAN module off or on. Enter the sleep mode. Turn off the volume output. Decrease the speaker volume. Increase the speaker volume. Switch the display between the LCD panel and the external monitor. Decrease the brightness of the LCD. Increase the brightness of the LCD. Lock and unlock the number pad. Turn the scroll lock function on or off. Capture the on screen display as a graphic. Fn + Del (SysRq) Call up the system run window. Fn + (PgUp) Fn + (PgDn) Move to the previous page. Move to the next page. Move the cursor to the beginning of a row. Move the cursor to the end of a row. Fn + (Home) Fn + (End) 19 Using the Touch Pad The touch pad includes a touch-sensitive pad and two buttons, and can be used like a mouse. You can move the cursor on the screen, select items, and call up menus. To move the cursor on the screen, move the tip of your finger across the touch pad. To left-click, press the left button once. To double click, quickly press the left button twice. To right-click, press the right button once. To drag and drop, press and hold the left button, and move your finger on the touch pad to the desired location. 20 Using the Touch Screen The display panel of your notebook also works as a touch screen. You can use the stylus pen to control system operations, or as a pen for writing or illustration applications. The first time you power on the notebook, follow the on screen instructions to activate the touch screen. A Warning Do not tap or write on the screen with excessive force. Doing so may damage the LCD display. Rotating the Display Panel The display panel of your notebook can rotate up to 180 degrees. You can fold it down with the display facing up, and use it as a writing pad. In the folded position, the internal sensor intuitively switches the screen display to match the orientation of the notebook. You can rotate the screen horizontally or vertically to suit your needs. To rotate the display panel:
1. Lightly grip the bottom corners of the display panel with your fingers, while keeping your palms on the base of the notebook. 2. Gently turn in the counterclockwise direction. 21 3. Turn 180 degrees until the display panel gently snaps into place. Do not try to turn the display panel in the opposite direction, or more than 180 degrees. A Warning 22 To use the display panel as a writing pad:
1. Make sure the display panel has been rotated 180 degrees. 2. Hold the display panel by one or both of the upper corners. 3. Gently lower the display panel to the closed position. 23 Using the Web Camera The built-in web camera can rotate up to 180 degrees, and is equipped with an internal sensor to automatically switch to the correct orientation. You can rotate the web camera back and forth to use on both sides of the display panel. To rotate the web camera:
1. Hold the edge of the web camera with your thumb and index finger. 2. Use your thumb to push the bottom edge of the web camera up. 3. Gently turn outwards until it locks into the 180 degrees position.
Note The web camera must be returned to its original position for the display panel to close properly. 24 Conserving the Battery Power You can use a combination of key controls to enter the sleep or hibernation mode to conserve the battery power. In the sleep mode, hardware devices, such as the display panel and hard disk, are turned off to conserve energy. In the hibernation mode, all system data are saved in the hard disk before powering down. No power or very little power is drawn from the battery module. To enter the sleep mode:
Press and hold [Fn + F2]. To enter the hibernation mode in Windows:
1. Press the Windows logo key, and then press [U]. 2. When the popup window appears, press and hold [Shift + H]. To exit the sleep or hibernation mode:
Slide the power latch towards you and release.
Note When exiting the hibernation mode, the amount of time the system requires to restore all its previous contents can range from five to twenty minutes, depending on how much RAM has been installed on your notebook. 25 BBIIOOSS SSeettuupp The BIOS (Basic Input/Output System) Setup Utility runs and maintains a variety of hardware functions. It is a menu-driven software, which allows you to easily configure and change the settings. When turning on the notebook for the first time, you may get a message prompting you to run the BIOS Setup Utility. Entering BIOS Setup Turn on the power, and press the DEL key quickly when the POST (Power-On Self Test) is running. Main Setup In this menu you can change the time and date, and view basic processor and system memory information. System Time: Enter the time in HH:MM:SS format. System Date: Enter the date in MM/DD/YY format. BIOS Version: Displays the BIOS revision number. EC Version: Displays the EC revision number. IDE Channel 0 Master: Displays the hard disk information. Use the items in this menu to configure settings for your hard disk. CPU Type: Displays the CPU type. 26 System Memory: Displays the amount of conventional memory detected during boot. Extended Memory: Displays the amount of extended memory detected during boot. Advanced Setup In this menu you can configure advanced settings. Wake On LAN: When enabled, turning on wireless LAN will cause the system to exit the sleep or hibernation mode. Summary screen: When enabled, system configuration is displayed during boot. Boot Diagnostic Screen: When enabled, the diagnostic screen is displayed during boot. QuickBoot Mode: When enabled, the system skips certain tests during boot. This will decrease the time needed to boot the system. Video (Intel IGD) Control Sub-Menu: Use the items in this menu to control the configuration of the Internal Graphics Display device. 27 Security Setup In this menu you can set up supervisor and user passwords to protect system information and limit third party access. Supervisor Password Is: Displays the supervisor password. User Password Is: Displays the user password. Set Supervisor Password: Enter and confirm your new password. You will be asked to enter this password each time you enter the setup utility. Set User Password: The supervisor password must be set before you can set the user password. You will be asked to enter this password each time the notebook is powered on. Diskette access: Configure user access for the BIOS Setup Utility. Fixed disk boot sector: Write Protect the boot sector of the hard disk to avoid infection by some virus types. Password on boot: When enabled, a password is required during system boot. Either the supervisor or user password will be accepted. TPM Support: When enabled, the built-in TPM security chip is activated. 28
Note Passwords are not case sensitive. Write the passwords down and keep in a safe location. If you forget the passwords, the notebook may need to be sent back to the factory or to an authorized service dealer to reset the passwords. Boot Setup In this menu you can decide the order of boot devices to load the operating system. 29 Exit Setup Exit Saving Changes: Exit system setup and save your changes to CMOS. Exit Discarding Changes: Exit system setup without saving changes to CMOS. Load Setup Defaults: Load default values for all setup items. Discard Changes: Load previous values from CMOS for all setup items. Save Changes: Save setup data to CMOS. 30 TTrroouubblleesshhoooottiinngg Troubleshooting activity should only be performed by an adult. Your notebook has been fully tested and complies with the system specifications before shipping. However, incorrect operations and/or mishandling may cause problems. You may also encounter simple setup or operating problems that can be solved by considering the following suggestions. If the problem persists, contact your dealer for service. Make sure the AC adapter is properly plugged into the notebook and a wall outlet. Check to see if the power indicator of the notebook is on. Check to see if your keyboard is operational by pressing and holding any key. Make sure all devices connected to the external ports are plugged in properly. You can also remove these devices to eliminate them as the source of the problem. Some software programs may cause problems during your routine use. Consult the software vendor for problem solving. An incorrect setting in the BIOS Setup Utility may cause the system to malfunction. If you are unsure of the changes you made, go to the BIOS Setup Utility and load default settings. 31 SSppeecciiffiiccaattiioonnss Items Dimensions
(W x D x H) Weight Target CPU Core Logic System Memory System Storage Boot ROM LCD Touch screen Graphics Graphics Memory I/O ports Audio Audio I/O Wireless LAN Card Reader Webcam
(optional) Embedded controller Battery Buttons/Switches Status indicators Keyboard Touch pad Prototype w/o handle: 241.4 mm x 181.4 mm x 27.7 mm (front side) with handle: 241.4 mm x 209.3 mm x 27.7 mm (front side) ps. All of dimensions with tolerance 0.4 mm 1.21 kg Diamondville 1.6GHz, 512 KB L2 cache, FSB=533 MHz Intel 945GSE + ICH7-M DDR2, 512MB / 1GB / 2GB Option 1: NAND flash 4 / 8 /16 GB Option 2: 1.8HDD 60 GB Phoenix code, 1MB flash ROM 8.9-wide TFT LCD Color mode: 1024x600, with LED backlit, LVDS interface 5-wire 8.9 ITO resistive touch screen Embedded in Intel 945GSE Share system memory USBx2, Headphone out, Mic-in, DC-in RJ-45 VGA-Out HD audio codec, ALC269. Headphone out, Mic-in, Internal mono MIC, Internal stereo speakers WLAN 802.11 b/g/n with mesh support Built-in Ethernet SD/MMC Card Integrated 1.3M Pixel Camera ENE KB3310D (w/KBC) 4 cell Li-Ion, 18650x4 (4400/4800mA, 7.4V) 6 cell Li-Ion, 18650x6 (6600/7200mA, 7.4V) Removable battery pack with hard pack, gauge and connector Lid switch (magnetic switch) System On/Off button TBD. 80keys, Travel: 1.5mm +-0.2mm, Keyforce: 60+-15g Standard finger-sensing pad with two buttons 32 IInnddeexx A AC adapter replacing, 5 B battery charging time, 15 installing, 14 removing, 15 status indicators, 15, 18 bezel button, 9 BIOS configuration, 26 C care and maintenance, 2 E external monitor connecting, 10 F factory settings restoring, 30 H headphones, 11 K keyboard controls, 19 L LCD display opening, 16 rotating, 21 M memory card inserting, 10 microphone, 9, 11 P password setting up, 28 S switching the power on and off, 16 system settings, 26 status indicators, 18 T touch pad, 20 touch screen, 21 stylus pen, 11, 21 using as writing pad, 23 U USB connecting, 10, 11 W web camera rotating, 24 33
1 2 | Manual 2 | Users Manual | 613.40 KiB |
USER MANUAL BCM92046 Solution Bluetooth Module for Lenovo Contents SECTION ONE: INTRODUCTION........................................................................................... 1 1.1 FEATURES................................................................................................................................... 1 1.2 HARDWARE REQUIREMENTS ...................................................................................................... 1 SECTION TWO: BLUETOOTH INSTALLATION .......................................................................... 3 2.1 ACTIVEPERL INSTALLATION ........................................................................................................ 3 2.2 BLUETOOL INSTALLATION ............................................................................................................ 7 2.3 DRIVER IN BTWUSB ................................................................................................................... 9 SECTION THREE: FCC NOTICE ................................................................................................ 11 3.1 FCC COMPLIANCE ............................................................................................................... 11 3.2 FCC CLASS B STATEMENT .................................................................................................. 12 The information contained in this manual has been verified at the time of this manual printing. The manufacturer reserves the right to make any changes and improvements in the product described in this manual at any time and without notice. All registered trademarks are the property of their respective owners. Introduction
Section One:
The Bluetooth Module use a monolithic single-chip, Foxconn BCM92046 and it can compliant Bluetooth 2.1.This Bluetooth module is base on the highly integrated BCM92046 stand-alone baseband processor with an integrated 2.4GHz transceiver. It is fully compliant with the Bluetooth radio specification and incorporates new modulation schemes to support enhanced data rate(EDR) of 3MBps. 1.1 Features 1.1.1 Bluetooth Function o Bluetooth radio firmware is upgradeable for bug fixes, initial version compatible with Bluetooth specification version 2.1 o Fully compliant to Bluetooth SIG (BQB) compatibility testing. o USB Pin assignment is to use MDC reserve pin to communicate with Host.interface o Bluetooth Profile Support
- Pim Item Transfer
- Pim Synchronization
- Network Access
- Dial-up Networking
- Bluetooth Serial Port
- Fax
- Audio Gateway
- Headset
- Bluetooth Imaging o Drivers support Windows 98, 98SE, ME, 2000, XP. o Supports Power Management 1.2 Hardware Requirements Supply Voltage 3.3V Frequency Range 2.400-2.4835 GHz Antenna Load 50 Ohm Receive Sensitivity 78 dBm@0.1% BER Maximum Receiver Signal
-20 dBm TX Power 4 dBm maximum (class 2) RF Power Control Step Size 2 dB Range Radio 10 meters at 0 dBm TX power (class 2) Compliant with Bluetooth radio specification and incorporates new modulation schemes to supports enhance data rate (EDR) of 3Mbps Pico Net 1 master to 7 slaves Operating Channels 79 channels of 1 MHz BW Security Full support of Bluetooth security provisions including hardware support for full length 128 bit encryption keys. Host Interface (USB) USB specification 2.1 compliant and using MDC reserve pin to communicate with Host Software Requirements Windows 98SE, ME, 2000, XP. Mechanical Requirements 26mm x 14mm Section Two: Bluetooth Installation The following steps provide instructions for installing Bluetooth. 1. Make sure your Bluetooth device already insert into your notebook. 2. Make sure your notebook operating system support Windows 98SE or ME or 2000 or XP. 2.1 ActivePerl Installation Proceed to the following section. in the software package Double click the program ActivePerl-5.8.4.810-MSWin32-x86.msi to execute theTo execute ActivePerl Windows shows the welcome dialog as below, click the Next to begin the process 1. The license agreement dialog will pop up, please read it carefully. If you agree it, choose I accept the terms in the license agreement and click Next 2. Windows show the custom setup, select the way you want features to be installed, and then click Next. 4 Show the new features in PPM, then select Next 5 Choosing setup options shows, and you should choose the first and second items, then click Next 6 Its ready to install the tool, click Install to run it. 7 Installing ActivePerl 5.8.4 Build 810. 8 Click the Finish button, completing the setup wizard. 2.2 Bluetool Installation Double click the program BlueToolInstall_v1.0.0.3.exe to execute BluetoolInstall in the software package 1 Show the welcome dialog as below, click the Next to begin the process:
2 Specify the destination folder in your local system, which you want the software install to. You may use the default folder or click Change to install to different folder, then click Next 3 Choose the setup type you need, here you could select the typical type for your test , then click Next 3. The wizard is ready to begin installation, and shows the setup type and destination folder you have chosen, then click Next 4. The dialog installshied wizard completed shows, after selecting the item launch the program ,click Finish 2.3 Driver in BTWUSB 1111 After inserting the bluetooth module, it will search driver of BTWUSB as below, you could select the destination of the driver from the second option, then click next 2222 Then Select the Driver location and click Next:
3333 Searching for the driver, please wait for it. 4 Finishing searching for the driver, and the driver is installed, then click the Finish to finish the installation. Section Three: FCC Notice 3.1 FCC Compliance This Equipment complies with Part 68 of the FCC Rules. On this equipment is a label that contains, among other information, the FCC registration number and Ringer Equivalence Number (REN) for this equipment. You must, upon request, provide this information to your telephone company. If your telephone equipment causes harm to the telephone network, the Telephone Company may discontinue your service temporarily. If posible, they will be notify in advience. But if advance notice isnt practical, you will notified as soon as possible. You will be informed of your right to file a complaint with the FCC. Your telephone company may make changes in its facilities, equipment, operations or procedures that could affect proper operation of your equipment. If they do, you will be notified in advance to give you an opportunity you maintain uninterrupted telephone service. The FCC prohibits this equipments should fail to operate properly, disconnect the equipment from the phone line to determine if it is causing the problem. If the problem is with the equipment, discontinue use and contact your dealer or vendor. 3.2 FCC Class B Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on , the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna
increase the separation between the equipment and the receiver
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
Consult the dealer or an experienced radio/TV technician for help Notice: (1)Shielded cables, if any, must be used in order to comply with the emission limits. (2) Any change or modification not expressly approved by the grantee of the equipment authorized could void the user authority to operate the equipment. Caution: Please make sure you already disconnect the phone cable before you want to touch or remove modem module.
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2008-11-21 | 2412 ~ 2462 | DTS - Digital Transmission System | Original Equipment |
2 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2008-11-21
|
||||
1 2 | Applicant's complete, legal business name |
Quanta Computer Inc
|
||||
1 2 | FCC Registration Number (FRN) |
0006267215
|
||||
1 2 | Physical Address |
No. 188, Wenhua 2nd Road, Guishan District
|
||||
1 2 |
Taoyuan City, N/A 33377
|
|||||
1 2 |
Taiwan
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
c******@curtis-straus.com
|
||||
1 2 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 2 | Grantee Code |
HFS
|
||||
1 2 | Equipment Product Code |
NL
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
J****** K******
|
||||
1 2 | Telephone Number |
+886-******** Extension:
|
||||
1 2 | Fax Number |
+886-********
|
||||
1 2 |
j******@quantatw.com
|
|||||
app s | Technical Contact | |||||
1 2 | Firm Name |
Neutron Engineering, Inc.
|
||||
1 2 | Name |
J******** Z********
|
||||
1 2 | Physical Address |
No. 132-1, Lane 329, Sec. 2, Palain Rd.
|
||||
1 2 |
Shijr City, Taipei
|
|||||
1 2 |
Taiwan
|
|||||
1 2 | Telephone Number |
86-76******** Extension:
|
||||
1 2 | Fax Number |
86-76********
|
||||
1 2 |
j******@btl.org.cn
|
|||||
app s | Non Technical Contact | |||||
1 2 | Firm Name |
Neutron Engineering, Inc.
|
||||
1 2 | Name |
J****** Z********
|
||||
1 2 | Physical Address |
No. 132-1, Lane 329, Sec. 2, Palain Rd.
|
||||
1 2 |
Shijr City, Taipei
|
|||||
1 2 |
Taiwan
|
|||||
1 2 | Telephone Number |
86-76******** Extension:
|
||||
1 2 | Fax Number |
86-76********
|
||||
1 2 |
j******@btl.org.cn
|
|||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | DTS - Digital Transmission System | ||||
1 2 | DSS - Part 15 Spread Spectrum Transmitter | |||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Notebook Computer | ||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Original Equipment | ||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | Output power listed is conducted. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. Highest reported SAR is: body 0.403 W/kg. | ||||
1 2 | Output power listed is conducted. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. | |||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
BTL Inc.
|
||||
1 2 | Name |
I****** C********
|
||||
1 2 | Telephone Number |
+886-******** Extension:
|
||||
1 2 | Fax Number |
+886-********
|
||||
1 2 |
i******@newbtl.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | CC | 2412.00000000 | 2462.00000000 | 0.1290000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0010000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC