all | frequencies |
|
|
exhibits | applications |
---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 3 |
|
Part 1 | Users Manual | 311.66 KiB | ||||
1 2 3 |
|
Part 2 | Users Manual | 1.09 MiB | ||||
1 2 3 | Cover Letter(s) | September 07 2004 | ||||||
1 2 3 | External Photos | December 07 2004 / September 07 2004 | ||||||
1 2 3 | Internal Photos | December 07 2004 / September 07 2004 | ||||||
1 2 3 | ID Label/Location Info | September 07 2004 | ||||||
1 2 3 | Cover Letter(s) | September 07 2004 | ||||||
1 2 3 | RF Exposure Info | September 07 2004 | ||||||
1 2 3 | RF Exposure Info | September 07 2004 | ||||||
1 2 3 | RF Exposure Info | September 07 2004 | ||||||
1 2 3 | RF Exposure Info | September 07 2004 | ||||||
1 2 3 | Test Report | September 07 2004 | ||||||
1 2 3 | Test Report | September 07 2004 | ||||||
1 2 3 | Test Setup Photos | September 07 2004 | ||||||
1 2 3 | Cover Letter(s) | June 05 2004 | ||||||
1 2 3 | Cover Letter(s) | June 05 2004 | ||||||
1 2 3 | ID Label/Location Info | native | June 05 2004 | |||||
1 2 3 | Test Report | September 05 2004 / June 05 2004 | ||||||
1 2 3 | RF Exposure Info | September 05 2004 / June 05 2004 | ||||||
1 2 3 | RF Exposure Info | September 05 2004 / June 05 2004 | ||||||
1 2 3 | Test Setup Photos | June 05 2004 | ||||||
1 2 3 | Cover Letter(s) | |||||||
1 2 3 | Operational Description | January 07 2004 | ||||||
1 2 3 | Test Report | |||||||
1 2 3 | ID Label/Location Info | |||||||
1 2 3 | External Photos | |||||||
1 2 3 | RF Exposure Info |
1 2 3 | Part 1 | Users Manual | 311.66 KiB |
FCC Regulations Conditions of Use Operation of this Panasonic mobile phone is subject to the following two conditions; (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This Panasonic mobile phone generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device on and off, the user is encouraged to try to correct the interference by one or more of the following measures:
1). Reorient or relocate the receiving antenna. 2). Increase the distance between the device and receiver. 3). Connect the device into an outlet on a circuit different from that to which the receiver is connected. 4). Consult the dealer or an experienced radio/TV technician for help. The radiated output power of this internal wireless radio is far below the FCC radio frequency exposure limits. Nevertheless, the wireless radio shall be used in such a manner that the radio is 2.5 cm or further from the human body. However, the user of wireless radios may be restricted in some places or situations, such as aboard airplanes. If you are unsure of restrictions, you are encouraged to ask for authorization before turning on the wireless radio. Several restrictions and cautions of using mobile phone are listed in the Important Information. FCC RF EXPOSURE INFORMATION Read this information before using your handset In August 1996 the Federal Communication Commission (FCC) of the United States with its action in Report and Order FCC 96-326 adopted an updated safety standard for human exposure to radio frequency (RF) electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S and international standards bodies. The design of this phone complies with the FCC guidelines and these international standards. Use only the supplied or an approved antenna. Unauthorized antennas, modifications, or attachments could impair call quality, damage the phone, or result in violation of FCC regulations. Do not use the phone with a damaged antenna. If a damaged antenna comes into contact with the skin, a minor burn may result. Please contact your local dealer for replacement antenna. Body-worn Operation This device was tested for typical body-worn operations. To comply with FCC RF exposure requirements, a minimum separation distance of 0.6 inches (1.5 cm) must be maintained between the users body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with FCC RF exposure requirements and should be avoided. For more information about RF exposure, please visit the FCC website at www.fcc.gov
1 2 3 | Part 2 | Users Manual | 1.09 MiB |
A100_OI_English.book Page 7 Monday, March 8, 2004 3:10 PM Getting Started Fitting and removing the battery Before removing the battery, ensure that the phone is switched off and the charger is disconnected from the phone. Fitting the battery Remove the battery compartment cover. Insert the battery ensuring the 3 gold Contacts align with the 3 gold pins in the phone. Removing the battery Push and hold the release latch the battery out
. toward the top of the phone then lift Getting Started 7 A100_OI_English.book Page 8 Monday, March 8, 2004 3:10 PM Fitting and removing the SIM The SIM is located under the battery. Fitting the SIM Removing the SIM Ensure the gold contacts are facing downwards before sliding the SIM into the SIM holder. While holding the tab down slide the SIM out. Charging the battery Connecting and disconnecting the Travel Charger The battery must be fitted in the phone before the charger is connected. Insert the Charger Connector into the socket at the base of the phone before connecting the Charger to the Mains socket-outlet. Once Connected the Battery Level Indicator will start scrolling. (See page 9 "Battery level indicator") It is recommended to charge the battery for a minimum of 4 hours before first use. NOTE: DO NOT force the connector as this may damage the phone and/or the charger. If the battery has been deeply discharged, it may take several minutes before the Battery Level Indicator is displayed. 8 Getting Started A100_OI_English.book Page 9 Monday, March 8, 2004 3:10 PM When charging is complete disconnect the charger from the socket-outlet before removing the plug from the Phone. Battery level indicator While chargingCharging complete
>J Phone on Phone off Low battery power warning When the battery power is low, Battery is low message will be displayed. If this occurs during conversation, finish your call immediately. The power will automatically switch off after the warning tone. Fully recharge the battery. See
"Charging the battery" on page 8. (Calls can be made and received while the phone is charging.) Getting Started 9 A100_OI_English.book Page 10 Monday, March 8, 2004 3:10 PM Keys and display Ear Piece Personal Hands Free Connector Navi-key Scrolls/moves through menus Right Soft Key Cancels/exits Perform functions indicated on the right side corner Power/End Key Press and hold to switch your phone on/off Silent Mode Key Press and hold to switch Silent Mode on/off Charging Connector Display Left Soft Key Performs functions indicated on the left side corner Send Key Answers/makes a call 10 Getting Started A100_OI_English.book Page 11 Monday, March 8, 2004 3:10 PM Key functions Key Function 4 A
C D
2-Way (up/down) Navi-key: Scrolls or moves through menus, text and phone numbers. In idle mode, press to activate "Contacts". Left Soft key: Performs the functions indicated by text shown on the display. In idle mode, press to activate "Menu" display, or press and hold to activate "Profiles" menu. Right Soft key/Cancel or Exit key: Performs the functions indicated by text shown on the display. Mainly used to cancel and return to the previous menu level. In text entry mode, long press to delete text. In idle mode, press and hold to activate "Messages" menu. When receiving a call, press to mute the ringtone. Numeric key pads: Enters numbers. Press and hold one of the keys from $ to , to make a Hotkey dial. In text entry mode, enter text, numbers and characters. Press and hold # to enter a "+" (international access code) or "P"
(extension number code). When you need to dial an extension number, dial the phone number first and press and hold # to add a "P" then enter the extension number. Send Key: Makes a call or answers a call. In idle mode, press to check the last dialled list. In text entry mode, press to switch between input methods. Power/End Key: Ends/rejects a call. During key operation, press to return to the previous display. In idle mode, press and hold to switch phone on/off. Press and hold to return to idle mode. Silent Mode Key: In idle mode, press and hold to switch the Silent Mode (Vibration on/Ring off) on and off. In text entry mode, press and hold to turn T9 smart English input mode on/off. During a call hold to press to turn the loud speaker on/off. Getting Started 11 A100_OI_English.book Page 12 Monday, March 8, 2004 3:10 PM Key functions (During a call) During a call minimal menu options are available by pressing the following key options. Key Function A
1 5 Hands free, Conference call, Call transfer, Contacts list, Messages menu, Call status. Swaps between two calls. Put the call on hold. Increases the volume while in a call. Decreases the volume while in a call.
# , Sends DTMF.
12 Getting Started A100_OI_English.book Page 13 Monday, March 8, 2004 3:10 PM Displays Status Icon Idle display Wallpaper Left Soft Key Selection Area Right Soft Key Selection Area The clock appears on the display one minute after you press the last key. NOTE: All Screen images in the manual are simulated. NOTE: Some services described in this manual are network dependent or may only be available on a subscription basis. Some functions are SIM dependent. For more information contact your service provider. Getting Started 13 A100_OI_English.book Page 14 Monday, March 8, 2004 3:10 PM Status icons The status icons are displayed or animated according to the currently activated functions. The Antenna, Signal and Battery icons are displayed when the handset is switched on and connected to a network. When the network level is zero, the Signal icon will not be displayed. Icon Indication OP Antenna and signal strength Registered to a non-home network - roaming Call Diverts is on G L Key Guard is enabled Message area is full Unread message is stored N Voice mail indicator (Voice mail is received) Alarm is set All tones or ring volume is off Vibration is on Battery full level low battery J K 14 Getting Started A100_OI_English.book Page 15 Monday, March 8, 2004 3:10 PM Symbols in the Manual SymbolsContent 154 A
Press the Navi- key in the direction indicated by the arrow Press Left Soft Key Press Right Soft Key
#~, Press numeric key pads C D Press to answer a call or call a dialled number Press to end a call or long press to switch the phone on/off Getting Started 15 A100_OI_English.book Page 16 Monday, March 8, 2004 3:10 PM Basic Operations Turning the phone on/off 1.Press and hold D for 2 to 3 seconds 2.The phone starts in idle mode. 3.Press and hold D again to turn the power off Making a call Ensure that the signal strength meter shows network coverage is available in the current area. To make a call, start in idle mode. Standard Dialling 1.Enter the area code and phone number C The dialled number is displayed. 2.When the other party answers, talk into the Microphone. Ear piece Volume:
During a call, 4 to adjust the ear piece volume Using the contacts list 1. 4 To enter Contacts 2. 4 required name or phone number C Last number dialling 1. C 2. 4 required name or phone number C 16 Basic Operations A100_OI_English.book Page 17 Monday, March 8, 2004 3:10 PM International dialling The international access code (+) and the destination country/region code should be entered, followed by the area code and phone number. 1.Press and hold # until "+" is displayed then enter the country / region code 2.Enter the area code and phone number C NOTE: Many countries/regions include an initial "0" in the area code. This should, in most cases, be omitted when dialling international numbers. If you have difficulties making international calls, contact your service provider. Emergency call To make an emergency call, the antenna () must be present When SIM is inserted:
enter the emergency number 112 C When SIM is not inserted:
enter the emergency number 112 C OR
@ (SOS) > "Emergency Call" A (Yes) NOTE: Most countries support the international emergency number 112. If you find the number does not work on your phone, please call your service provider or network operator. Emergency calls without a SIM is country or network operator dependent. Ending a call To hang up,D The duration of the call will be displayed. When the "Max cost" is on, the remaining units will be displayed. For setting the "Max cost", please refer to page 65. Basic Operations 17 A100_OI_English.book Page 18 Monday, March 8, 2004 3:10 PM Answering a call C OR When "Any key answer" is on, From idle mode press any key except D
(See "Any key answer" on page 35) Ring volume:
From My Phone menu 1. 4 Sounds >Ring volumeA(Select) 2. 4 Adjust the volume level A(OK) Quick touch silent mode:
To quickly set the ringtone off () and the vibration on ( ), From idle mode Press and hold !
To resume, Press and hold ! again One click mute on incoming call:
To set the ring tone off,
@(Mute) If you want to reply to the call, A(Reply) If you want to reject the call, A(Reject). Reject incoming call:
D 18 Basic Operations A100_OI_English.book Page 19 Monday, March 8, 2004 3:10 PM In-call operations During a call, the following options are available by pressing A(Menu) or @(Hold) Hands free/Hand held You can switch the phone between hands free and hand held. During a call:
1. A(Menu) 2. 4 Hands free / Hand heldA(Select) Contacts You can access your Contacts list that is stored in SIM or your phone. During a call:
1. A(Menu) 2. 4 ContactsA(Select) Messages You can create, check, or send a message while in a call. Please refer to "Messages Menu" on page 50. During a call:
1. A(Menu) 2. 4 MessagesA(Select) Basic Operations 19 A100_OI_English.book Page 20 Monday, March 8, 2004 3:10 PM Hold You can put a call on hold. During a call:
@(Hold) To resume:
A(Back) NOTE: Making a second call is network dependent. You can not adjust the volume while a conference call. Making a second call During a call:
1.Enter the second phone number or select a phone number from Contacts list.
(To access "Contacts Menu" on page 39) 2. C The first call is put on hold. NOTE: Making a second call is network dependent. 20 Basic Operations A100_OI_English.book Page 21 Monday, March 8, 2004 3:10 PM Incoming call while in a call NOTE: Call waiting must be on-see "Call waiting" on page 63 Call waiting is network dependent. During a call, you may receive another call:
1.To answer another call, C (First call is placed on hold.) To disconnect another call, A(Reject) 2.During a conversation with a second caller, @(Swap) or A(Menu) and select one of the following options:
Conference You can make a conference call with up to 5 parties During a call:
1. A(Menu) 2. 4 ConferenceA(Select) Call transfer Call transfer connects the active calling party to the other party, then disconnects your line (SIM dependent) During a call:
1. A(Menu) 2. 4 Call transferA(Select) Call status Call status allows you to disconnect a line or put a call on hold with the active party. During a call:
1. A(Menu) 2. 4 Call statusA(Select) Basic Operations 21 A100_OI_English.book Page 22 Monday, March 8, 2004 3:10 PM DTMF Swap When your call is connected to two calls, you can switch between the calls. During a call:
@(Swap) to change to the other call DTMF can be sent during conversation. These are often used to access voice mail, paging and computerised home banking. For example, you may need to enter a number to remotely access voice mail messages. A phone number may be stored in Contacts with DTMF, allowing the number to be dialled upon recall and the DTMF number to be sent automatically. Send DTMF during a call:
Enter digits (
, ! or ") Pause dial Using pauses allows you to send DTMF automatically. 1.Enter the phone number 2.Press and hold # until a "P" is displayed at the end of the phone number entered 3.Enter DTMF digits after the pause, e.g. enter the number to access voice mail messages 4. C When the call is connected DTMF will be sent after 3 seconds. 22 Basic Operations A100_OI_English.book Page 23 Monday, March 8, 2004 3:10 PM Text entry You can use alphanumeric characters to enter details into the Contacts list, to create text, etc. KeyText ModeNumeric T9(T9Abc, T9abc, T9ABC)
(Input language: English)
(Input mode indicat or: Abc, abc or Multi tap ABC)
(0 ~ 9) 0 1 2 3 4 _ &)
(a b c 2 )
(d e f 3 )
# Space 0. , ? + - = : ; _
$ 1 / ( ) < > [ ] { } % ~ _ & (1 / ( ) < > [ ] { } % ~
% A B C(a b c)A B C 2
& D E F(d e f)D E F 3
' G H I(g h i)G H I 4(g h i 4
( J K L(j k l)J K L 5(j k l 5)
) M N O(m n o)M N O 6
* P Q R S(p q r s)P Q R S 7(p q r s 7
+ T UV(t u v)T U V 8
, W X Y Z(w x y z)W X Y Z 9 C
NOTE: Displayed characters of T9 vary depending on the selected input language.Use 6 7 8 9 Shift mode
(Hold) Space # $ @ \
(t u v 8 )
(w x y z 9 )
(m n o 6 ) Shift mode
) 5
! to toggle T9 On/Off. Basic Operations 23 A100_OI_English.book Page 24 Monday, March 8, 2004 3:10 PM Shift mode change In text entry mode, the mode changes by pressing and holding C Multi tapTegic Abc -> abc -> ABC -> 123T9Abc -> T9abc -> T9ABC ->
123 Text Input mode change In text entry mode, to switch On/Off T9 mode, press!
Auto capital change Auto capital affects Abc and T9Abc. When Input mode is changed to Abc or T9Abc, When one of the following characters [. (Period) or ! or ? ] is input before a space, the next character is input as upper case. T9 Text Input Using this mode of text input dramatically reduces the required number of key presses. Press a key once for any letter you require on that key. The desired letter may not be displayed. Continue pressing other keys until the end of a word is reached; then check that the word has been typed correctly before continuing on to the next word. If the combination of letters typed has produced a word which is not the one you require, press A repeatedly until the correct word is displayed. Then continue to the next word. 24 Basic Operations A100_OI_English.book Page 25 Monday, March 8, 2004 3:10 PM Example of Text Input in T9 Mode To type a new message, follow these steps:
1.At the beginning of a new message press and hold
@(Clear) to delete previous text, if necessary. 2.Press C to change letter case, if necessary 3.Press % % ( ( "Call" is displayed. Note that the displayed words change as you type, always type to the end of the word before editing. T9 Languages can be selected from T9 Input -see "T9 Input" on page 32. If the word you require is not in the internal dictionary then it should be entered using the Multi tap (ABC) mode. Other text modes Multi tap mode (Abc, abc or ABC):
Each time a key is pressed in quick succession it displays the next character available on that key. Releasing the key or pressing another key enters the character displayed. The cursor moves to the next position. In T9 (Abc) or Multi tap (Abc) mode, the first entered letter in a sentence is in upper case. Basic Operations 25 A100_OI_English.book Page 26 Monday, March 8, 2004 3:10 PM Menu Display NOTE: Menu display contents are dependent on SIM. The menu system provides the means for accessing the functions which do not have their own dedicated buttons on the keypad. From idle mode 1. A(Menu) The main menu display has 9 menu options
(See on page 27.) 2. 4 required menu A(Select) OR pressing a number next to each menu icon will access a menu option directly. To go back to the Menu display, D repeatedly until the display goes back to the Menu display. 26 Basic Operations A100_OI_English.book Page 27 Monday, March 8, 2004 3:10 PM Menu Structure The 9 main menus are as follows. Games Hit Mouse Memory My Phone Sounds Display Language Alerts Profiles Auto answer Any key answer Defaults Calendar Key Guard Phone Menu
(or STK) *
Call Service Call Diverts Security Network Application Clock Calculator Currency Melody composer
(Phone Menu*)
*STK(SIM Application Tool Kit) is SIM dependent. Contacts Browse Create Groups Memory status My Numbers Hotkey dial My Contacts Messages Create Inbox Outbox Archive User Messages Memory status Settings Cell Broadcast Records Last dialled Answered Unanswered Delete all Menu Structure 27 A100_OI_English.book Page 28 Monday, March 8, 2004 3:10 PM My Phone Menu My Phone Sounds Display Language Alerts Profiles Auto answer Any key answer Defaults 28 My Phone Menu Ringtones ....................P. 29 Ring volume ................P. 29 Key tone.......................P. 29 Warning tone...............P. 30 Wallpaper.....................P. 30 Greeting .......................P. 30 Animation ....................P. 31 Contrast .......................P. 31 Backlight......................P. 31 T9 Input ........................P. 32 Display Languages .....P. 32 Ring only .....................P. 32 None.............................P. 32 Ring & Vibrate .............P. 32 Vibrate only .................P. 32 Ring once ....................P. 32 Normal .........................P. 33 Quiet.............................P. 33 Outdoor........................P. 33 Headset........................P. 33 A100_OI_English.book Page 29 Monday, March 8, 2004 3:10 PM Sounds Ringtones You can change the ringtones for specific events such as incoming calls, messages, or alarms. To customize the ringtone, select the event first, then modify the ringtone. From My Phone menu 1. 4 Sounds A(Select) 2. 4 RingtonesA(Select) 3. 4 Any call, Group calls, Alarm or Messages A(Select) 4. 4 required ringtone A(OK) Volume From My Phone menu 1. 4 Sounds A(Select) 2. 4 Ring volume A(Select) 3. 4 Adjust the volume level A(OK) Key tone From My Phone menu 1. 4 Sounds A(Select) 2. 4 Key toneA(On/Off) My Phone Menu 29 A100_OI_English.book Page 30 Monday, March 8, 2004 3:10 PM Warning tone From My Phone menu 1. 4 SoundsA(Select) 2. 4 Warning toneA(On/Off) Warning tone informs you of low battery. Display Wallpaper You can change the wallpaper on the idle display. Idle mode can also change into the clock. From My Phone menu 1. 4 DisplayA(Select) 2. 4 Wallpaper@(Select) 3. 4 required Wallpaper A(Select) Greeting You can create a greeting message that is displayed each time the phone is powered on. From My Phone menu 1. 4 Display A(Select) 2. 4 Greeting@(Edit) 3.Enter the greeting A(OK) 4. A(On/Off) 30 My Phone Menu A100_OI_English.book Page 31 Monday, March 8, 2004 3:10 PM Animation You can change the animation on the display when the phone is powered up. From My Phone menu 1. 4 DisplayA(Select) 2. 4 AnimationA(Select) 3. 4 required Animation A(Select) Contrast From My Phone menu 1. 4 DisplayA(Select) 2. 4 ContrastA(Select) 3. 4 Adjust the contrast A(OK) Backlight From My Phone menu 1. 4 DisplayA(Select) 2. 4 BacklightA(On/Off) My Phone Menu 31 A100_OI_English.book Page 32 Monday, March 8, 2004 3:10 PM Language T9 Input From My Phone menu 1. 4 LanguageA(Select) 2. 4 T9 InputA(Select) 3. 4 required input type A(On/Off) Display Languages It is possible to change the display language on your phone. From My Phone menu 1. 4 LanguageA(Select) 2. 4 Display LanguagesA(Select) 3. 4 required language A(Select) Alerts You can set your phone to ring and /or vibrate when you receive a call or messages. From My Phone menu 1. 4 Alerts A(Select) 2. 4 required Alert A(Select) The following options are available when a call is received:
- Ring only
- None
- Ring & Vibrate
- Vibrate only
- Ring once 32 My Phone Menu A100_OI_English.book Page 33 Monday, March 8, 2004 3:10 PM Profiles Activating a profile You can switch between four profiles in your phone each with a distinct combination of alert method, ringtone, etc. Profiles are set up for use in different environments. From My Phone menu 1. 4 Profiles A(Select) 2. 4 required profile A(Menu) 3. 4 ActivateA(Select) The following options are available:
Normal Quiet Outdoor Headset Suitable for everyday settings With a ringtone, appropriate for formal occasions Suitable when in loud environments Appropriate with vibration, when it is difficult to hear the ringtone Setting a profile You can customise a profile by changing the ring volume, key tone, warning tone, vibration, and/or backlight. Ring volume From My Phone menu 1. 4 Profiles A(Select) 2. 4 required profile A(Menu) 3. 4 Change settingsA(Select) 4. 4 Ring volumeA(Select) 5. 4 Adjust the volume level A(OK) My Phone Menu 33 A100_OI_English.book Page 34 Monday, March 8, 2004 3:10 PM Key tone From My Phone menu 1. 4 Profiles A(Select) 2. 4 required profile A(Menu) 3. 4 Change settingsA(Select) 4. 4 Key toneA(On/Off) Warning tone From My Phone menu 1. 4 Profiles A(Select) 2. 4 required profile A(Menu) 3. 4 Change settingsA(Select) 4. 4 Warning toneA(On/Off) Vibration From My Phone menu 1. 4 Profiles A(Select) 2. 4 required profile A(Menu) 3. 4 Change settingsA(Select) 4. 4 Vibration A(On/Off) Backlight From My Phone menu 1. 4 Profiles A(Select) 2. 4 required profile A(Menu) 3. 4 Change settingsA(Select) 4. 4 BacklightA(On/Off) 34 My Phone Menu A100_OI_English.book Page 35 Monday, March 8, 2004 3:10 PM Auto answer From My Phone menu 4 Auto answerA(On/Off) Auto answer can be set. To use this function, the personal handsfree ear piece needs to be connected to the phone. Any key answer From My Phone menu 4 Any key answerA(On/Off) Calls can be answered by pressing any key (except D). Defaults From My Phone menu 1. 4 DefaultsA(Select) 2. All personal settings can be returned to their factory default settings.
"Restore factory settings?" @(Yes) or A(No) My Phone Menu 35 A100_OI_English.book Page 36 Monday, March 8, 2004 3:10 PM Games Menu Games Hit Mouse Memory Selecting Games From Games menu 4 required game A(Select) from Hit Mouse and Memory. NOTE: Once the power is turned off, High scores or Best scores are lost. Hit Mouse When you see the mouse, press any button from1 to 9 as quickly as possible to hit it. Keep in mind that the cat is not your target. Example: If you press 5, you will hit the object hidden in the 5th hole. This game will end automatically and you will be given a score. This score might be the highest one! Good luck!
Key operation:
Press $ ~ , Starting games:
Select New by pressing @(New). 36 Games Menu A100_OI_English.book Page 37 Monday, March 8, 2004 3:10 PM To change settings:
1. A(Menu) 2. 4 Change settingsA(Select) 3. 4 required settingA(On/Off) To start the game on a level of your choice:
1. A(Menu) 2. 4 Level A(Select) 3. 4 required level To see the top score:
1. A(Menu) 2. 4 Top scoreA(Select) To see the instructions:
1. A(Menu) 2. 4 InstructionsA(Select) Games Menu 37 A100_OI_English.book Page 38 Monday, March 8, 2004 3:10 PM Memory Match cards to find pairs with as few tries as you can, and make all cards visible. You can press keys 2, 4, 6, and 8 to move the cursor as you wish, and key 5 to select cards, when all cards are visible, you can get a score or maybe top score. Good luck!
Key Operation:
Press %, ' (, ), +
Starting Games:
Select New by pressing @(New) To change settings:
1. A(Menu) 2. 4 Change settingsA(Select) 3. 4 required setting A(On/Off) To start the game on a level of your choice:
1. A(Menu) 2. 4 Level A(Select) 3. 4 required level A(Select) To see the top score:
1. A(Menu) 2. 4 Top scoreA(Select) To see the instructions:
1. A(Menu) 2. 4 InstructionsA(Select) 38 Games Menu A100_OI_English.book Page 39 Monday, March 8, 2004 3:10 PM Contacts Menu Contacts Browse Create Groups Memory tatus My Numbers Hotkey dial My Contacts SIM ...............................P. 40 Phone...........................P. 40 SIM...............................P. 40 Phone ..........................P. 41 Friends ........................P. 44 Colleagues ..................P. 44 Family..........................P. 44 Others..........................P. 44 VIP ...............................P. 44 SIM ...............................P. 46 Phone...........................P. 46 Contacts Menu 39 A100_OI_English.book Page 40 Monday, March 8, 2004 3:10 PM Browse Create Viewing the Contacts list in SIM/Phone You can search a number in the Contacts list. From Contacts menu 1. 4 Browse > SIM or Phone A(Select) 2. 4 Search the name you wish to view @(View) Creating a Contacts list in SIM Phone numbers can be stored in your SIM. In the SIM, you can store names, phone numbers, Location and record numbers. From Contacts menu 1. 4 Create A(Select) 2. 4 SIM A(Select) 3.Enter Name 5 > Phone 4. A(Save)
"Saved in SIM" is displayed NOTE: The length and amount of data is SIM dependent. 40 Contacts Menu A100_OI_English.book Page 41 Monday, March 8, 2004 3:10 PM Creating a Contacts list in Phone In the Phone, you can store Name, Phone number, Groups and Melodies. From Contacts menu 1. 4 Create A(Select) 2. 4 Phone A(Select) 3.Enter Name 5 > Phone 4.Enter Phone Number 5 5. @(Set) 4 required Group A(Select) 5 6. @(Set) 4 required Melody A(Select) 7.When entries are completed, A(Save) 8. The entries can be grouped together and these are retained even if you damage the SIM.
"Saved in Phone" is displayed. Storing a fixed dial number in FDN The Fixed dial feature allows you to limit your outgoing calls to a certain set of numbers saved in FDN which is located in SIM. When this function is on, only the Fixed dial numbers can be dialled, and any attempts to call any other numbers will fail. To activate this function, you need to set Fixed Dial on. See page 69. From Contacts menu 1. 4 Create A(Select) 2. 4 SIM A(Select) 3.Enter Name 5 > Phone 4. 4 SIM @(Set) 5. 4 FDN A(Select) 6. A(Save) 7.Enter PIN2 code > A(OK) To store a fixed dial number, you need to enter PIN2 code. Contacts Menu 41 A100_OI_English.book Page 42 Monday, March 8, 2004 3:10 PM Options Edit You can edit the selected Contacts entry. From Contacts menu 1. 4 Browse > SIM or Phone A(Select) 2. 4 required phone number or name A(Menu) 3. 4 Edit A(Select) 4. A(Save) Delete You can delete the selected Contacts entry. From Contacts menu 1. 4 Browse > SIM or Phone A(Select) 2. 4 required phone number or name A(Menu) 3. 4 Delete A(Select) 4.
"Delete this contact entry ?" A(No) or @(Yes) Delete all You can delete all the Contacts entries. From Contacts menu 1. 4 Browse > SIM or Phone A(Select) 2. 4 required phone number or name A(Menu) 3. 4 Delete all A(Select) 4.
"Delete all entries ?" A(No) or @(Yes) 42 Contacts Menu A100_OI_English.book Page 43 Monday, March 8, 2004 3:10 PM Copy to Phone/SIM You can copy the selected Contacts entry to the phone or SIM. From Contacts menu 1. 4 Browse > SIM or Phone A(Select) 2. 4 required phone number or nameA(Menu) 3. 4 Copy to phone/SIMA(Select) 4.
"Copy entry to Phone/SIM ?" A(No) or @(Yes) Copy all to Phone/SIM You can copy all the Contacts entries to the phone or SIM. From Contacts menu 1. 4 Browse > SIM or Phone A(Select) 2. 4 required phone number or name A(Menu) 3. 4 Copy all to phone/SIMA(Select) 4.
"Copy all entries to Phone/SIM ?" A(No) or
@(Yes) Search You can search a name in Contacts list. From Contacts menu 1. 4 Browse > SIM or Phone A(Select) 2. A(Menu) 3. 4 SearchA(Select) 4.Enter the first letter of the required name A(Select) Contacts Menu 43 A100_OI_English.book Page 44 Monday, March 8, 2004 3:10 PM Groups You can categorise the items stored in your phone into 5 groups; Friends, Colleagues, Family, Others and VIP. You can select a particular ringtone for each group to identify the incoming call. From Contacts menu 1. 4 Groups A(Select) 2. 4 required Group A(Menu) The following options are available by pressing A(Select) after selecting the required group:
View Set ringtone Remove entries View the Contacts entries in the selected group Set the required ringtone Delete all the Contacts entries in the selected group After selecting the required Group in step 2, you can view the Contacts entries by pressing A(View) When there is no entry stored in the selected group, "List Empty" is displayed. The following options are available by pressing A(Menu) when you view the list of the selected group:
Edit Delete Search Edit the selected Contacts entry Delete the selected Contacts entry Search for a desired item in the selected group by entering the name. 44 Contacts Menu A100_OI_English.book Page 45 Monday, March 8, 2004 3:10 PM Memory status Memory status shows how many locations are available in the Contacts list. Maximum memory capacity:
- Phone 250 locations
- SIM (SIM dependent)
- FDN 50 locations From Contacts menu 4 Memory StatusA(Select) My Numbers My Numbers is a handy phonebook where names and phone numbers can be stored and viewed. From Contacts menu 1. 4 My NumbersA(Select) 2. 4 required entry A(Menu) 3. 4 Edit A(Select) 4.Enter your phone number 5 5.Enter your name A(Save) After selecting the required entry in step 2, you can view My numbers entry by pressing A(View) When there is no entry stored in the selected group, "List Empty" is displayed. The following options are available by pressing A(Menu) when you select the required entry:
View Edit Delete View the selected My Numbers entry Edit the selected My Numbers entry Delete the selected My Numbers entry Contacts Menu 45 A100_OI_English.book Page 46 Monday, March 8, 2004 3:10 PM Hotkey dial Setting Hotkey dial Phone numbers stored at locations 001 - 009 in the Contacts list can be dialled quickly. From Contacts menu 4 Hotkey dialA(On/Off) NOTE: This function is SIM dependent. Making a call by using Hotkey dial From idle mode 1.Press and hold a digit key ( $ ,) 2.Press C You can select SIM or Phone so that the Contacts list directly accessed from idle mode is set to SIM or Phone Contacts list. From Contacts menu 1. 4 My ContactsA(Select) 2. 4 SIM or Phone A(Select) My Contacts 46 Contacts Menu A100_OI_English.book Page 47 Monday, March 8, 2004 3:10 PM Calendar New event You can organise your Calendar to remind you of a personal event, such as a holiday period or birthday. You need to set the clock, day and time before entering anything in the Calendar. In the Calendar, you can store:
From Calendar menu 1. @ to select Week or Month format 2.To select a day, press numeric keys 2, 8, 4 and 6 to
, and respectively, to set a move the cursor
, day. A(Agenda) 3. <New entry> A(Select) 4. A(Set) to select a type of event from Memo and Meeting A(Select) 5. 4 to enter Description 6. 4 to enter Start date 7. 4 to enter Start time 8. 4 to enter End date 9. 4 to enter End time A(Save). Ensure that the setting of the Calendar will not contravene any regulations whereby it may automatically power on when in an aircraft or medical facility, etc. - see "Introduction" on page 1. Calendar 47 A100_OI_English.book Page 48 Monday, March 8, 2004 3:10 PM View event From Calendar menu 1. @ to select Week or Month format 2.When Month format is selected:
Select a day by using the numeric keys (1, 5, 2, 4, 6 and 8) A(Agenda) When Week format is selected:
Schedule icon(s) will be shown corresponding to a period of time selected by pressing 4.
(Period of time : 4=0:00-3:59, 8=4:00-7:59, 12=8:00-
11:59, 16=12:00-15:59, 20=16:00-19:59, 24=20:00-
23:59) Select a day by using the numeric keys (1, 5, 2,4,6 and 8) A(Agenda) 3. 4 required schedule @(View) 4.To return to the previous display, A(OK) To edit @(Edit), edit the required information A(Save).
4
48 Calendar A100_OI_English.book Page 49 Monday, March 8, 2004 3:10 PM Key Guard The Key Guard function is used to prevent any keys from being accidentally pressed e.g. when the phone is being carried. From Key guard menu 1. 4 Key guardA(Select) 2. A(Yes) or @(No) When Key Guard is enabled, L appears on the display. Emergency calls are still available. When a call is received Key Guard will be disabled temporarily, and you can answer the call NOTE: When making emergency calls with the "Key Guard"
enabled, there will be no visual indication that the number is being dialled. When L appears on the display, A(Free) > "Press OK to Free keypad" A(OK) . Key Guard 49 A100_OI_English.book Page 50 Monday, March 8, 2004 3:10 PM Messages Menu Create Inbox Outbox Archive User Messages Memory status Settings Cell Broadcast 50 Messages Menu Inbox ......P. 56 Outbox ...P. 56 Message centre.....P. 58 Protocol .................P. 58 Validity period .......P. 59 Delivery report ......P. 59 Cell Broadcast.......P. 63 Read Messages.....P. 60 Topic list ................P. 60 Languages .............P. 61 Auto display ..........P. 61 A100_OI_English.book Page 51 Monday, March 8, 2004 3:10 PM Create Message centre It is possible to receive, display, edit and/or send text messages of up to 1520 characters in ten messages
(depending on the language), to the network that has a roaming agreement. (depending on the recipient's phone options.) Before sending a message, you need to enter the Message Centre number into Settings. From Messages menu 1. 4 Settings > Message centreA(Select) 2.Enter the message centre number in the international dial format
(See "International dialling" on page 17) A(OK) NOTE: Your network operator may have pre-installed this number. Do not change this number as it may cause failure of SMS Messaging. Messages Menu 51 A100_OI_English.book Page 52 Monday, March 8, 2004 3:10 PM Creating a message From Messages menu 1. 4 Create A(Select) 2. Create your text message - max. 1520 characters
(See "Inbox" on page 54) A(Menu) 3. 4 Send A(Select) 4. Enter the destination phone number A(OK) OR Recall a number from Contacts@(Names) >
4 required name A(Select) > A(OK) When you create a text, these options are available by pressingA(Menu) Send Save Save and send Picture & sound User Messages Send a text as a Short Text message Save a text in the Outbox in SIM Save a text in the Outbox in SIM and send Add a picture and/or sound to a text. Please refer to page 53. Use a short message stored in the phone For editing the User Message, See "User Messages" on page 57. 52 Messages Menu A100_OI_English.book Page 53 Monday, March 8, 2004 3:10 PM EMS (Enhanced message service) You can add a picture and sound to an SMS. Picture From Messages menu 1. 4 Create A(Select) 2.Create your text message A(Menu) 3. 4 Picture & soundA(Select) 4. 4 required picture A(Select) Sound From Messages menu 1. 4 Create A(Select) 2.Create your text message A(Menu) 3. 4 Picture & soundA(Select) 4. @(Sound) 5. 4 required sound A(Select) Messages Menu 53 A100_OI_English.book Page 54 Monday, March 8, 2004 3:10 PM Inbox Viewing a received message When a Short Text Message is received, the message indicator will flash on the display and a user preset audible alert will sound. If you are in a call you will be alerted by the vibrator. flashes when an unread message is received in the Inbox. When the Inbox is full, will remain until old messages are deleted. From Messages menu 1. 4 Inbox A(Select) 2. 4 required message @(View) NOTE: If the message indicator is di splayed constantly (does not flash), this means that the message area is full and you need to delete old messages in order to receive new messages. When reading messages, the following options are available by A(Menu) Delete Reply Forward Edit Delete All Extract Number Move to Archive Delete a message Create a replying SMS Forward a message to another phone Edit a message and save and/or send to another Delete all messages in Inbox Extract numbers in messages and save in Contacts Move a message into Inbox in Archive 54 Messages Menu A100_OI_English.book Page 55 Monday, March 8, 2004 3:10 PM Outbox Viewing a sent message To view messages the list of which is stored in SIM. From Messages menu 1. 4 OutboxA(Select) 2. 4 required message @(View) While you are reading a message, the following options are available by pressing A(Menu) Delete Edit Send Delete All Extract Number Move to Archive Delete a message Edit a message and save and/or send to another Send a SMS message after entering a recipient number Delete all messages in Outbox Extract numbers in messages and save in Contacts Move a message from Outbox to Outbox in Archive Messages Menu 55 A100_OI_English.book Page 56 Monday, March 8, 2004 3:10 PM Archive Viewing a stored message To view the list of messages which are stored in Archive. Inbox: When a message saved in Inbox is moved into Archive, the message will be saved in Archive Inbox. Outbox: When a message saved in Outbox is moved into Archive, the message will be saved in Archive Outbox. From Messages menu 1. 4 Archive A(Select) 2. 4 Inbox or Outbox A(Select) 3. 4 required message A(View) When reading a message, the following options are available by A(Menu) Edit Forward (Inbox)/
Send (Outbox) Delete Delete All Edit a message and save and/or send to another Forward/Send a message to another phone Delete a message Delete all messages in Inbox/Outbox 56 Messages Menu A100_OI_English.book Page 57 Monday, March 8, 2004 3:10 PM User Messages You can edit the preset User Messages, then save them for later use
.From Messages menu 1. 4 User MessagesA(Select) 2. 4 required message A(Select) 3.Edit the message A(Menu) 4 Save and send or Save A(Select) NOTE: When the text is wider than the screen display, the text will scroll. Memory status From Messages menu 4 Memory statusA(Select) Memory status shows how many locations are left to store messages in the Inbox. The maximum memory capacity:
- Phone 50 locations
- SIM (SIM dependent-100 max.)
- Archive 50 locations Messages Menu 57 A100_OI_English.book Page 58 Monday, March 8, 2004 3:10 PM Settings Message centre Before sending any messages, you need to enter your Message centre number. This message is provided by your service provider. From Messages menu 1. 4 SettingsA(Select) 2. 4 Message centreA(Select) 3.Enter your Message centre number Protocol The Message Centre is able to convert your message to the format specified by the selected protocol. From Messages menu 1. 4 SettingsA(Select) 2. 4 Protocol A(Set) 3. 4 Select required setting from Standard text, Fax, X.400, Paging, E-mail, ERMES, or Voicemail A(Select) 58 Messages Menu A100_OI_English.book Page 59 Monday, March 8, 2004 3:10 PM Validity period You can set the duration that your message is stored at the Message Centre. From Messages menu 1. 4 SettingsA(Select) 2. 4 Validity periodA(Set) 3. 4 Select required setting from Maximum, 1 Hour, 12 Hours, 1 Day, or 1 Week A(Select) Delivery report It is possible to request a delivery report on the status of a sent message. From Messages menu 1. 4 SettingsA(Select) 2. 4 Delivery reportA(On/Off) Messages Menu 59 A100_OI_English.book Page 60 Monday, March 8, 2004 3:10 PM Cell Broadcast Topic list You can receive your favourite information regularly from your service provider. You need to specify the "topic(s)" of information and the language that you wish to receive. To receive the broadcasts, "Cell Broadcast" needs to be on. From Messages menu 1. 4 Cell Broadcast > Topic list > Current> A(Select) 2. 4 required Topic A(Menu) 3. 4 Add or Delete A(Select) User defined topic From Messages menu 1. 4 Cell Broadcast > Topic list> User defined >
<New entry> A(Select) 2.Enter msg ID A(OK) 3.Enter Name A(OK) 4. 4 Current A(Select) 5. 4 < Add topic >A(Select) 6. 4 required Topic A(Select) Reading a message From Messages menu 1. 4 Cell BroadcastA(Select) 2. 4 Read MessagesA(Select) 3. A(Next) or @(Back) to select the required topic NOTE: This function will depend on your Network Service Operator. 60 Messages Menu A100_OI_English.book Page 61 Monday, March 8, 2004 3:10 PM Language You can set the language so that you can read the message you receive. From Messages menu 1. 4 Cell BroadcastA(Select) 2. 4 LanguagesA(Select) 3. 4 Insert A(Select) 4. 4 required language A(Select) 5. 4 Insert point A(Select) To complete adding languages;
4 Add to endA(Select) You can set the language so that you can read the message you receive. To remove a language, select Delete. Auto display In idle mode, the latest Info Message is displayed on your phone automatically. From Messages menu 1. 4 Cell BroadcastA(Select) 2. 4 Auto displayA(On/Off) Messages Menu 61 A100_OI_English.book Page 62 Monday, March 8, 2004 3:10 PM Phone Menu Phone Menu (or STK)*
Time/Charges .............P. 63 Call waiting .................P. 63 Withhold ID .................P. 64 Caller's ID ...................P. 64 Charge settings..........P. 64 All voice calls .............P. 66 Not reachable .............P. 66 No reply.......................P. 66 Busy ............................P. 66 Status check...............P. 66 Cancel all ....................P. 66 Call bar........................P. 67 Codes ..........................P. 68 Fixed dial.....................P. 69 SIM lock.......................P. 70 Auto network..............P. 70 New network...............P. 70 Network list ................P. 70 Band............................P. 70
*STK (SIM Application Tool Kit) is SIM dependent. NOTE: If SIM card provides SIM Application Tool Kit services, this menu will become the STK Menu. You can still access Games from Applications. 62 Phone Menu A100_OI_English.book Page 63 Monday, March 8, 2004 3:10 PM Call Service Viewing time/charges From Phone menu 1. 4 Call service > Time/ChargesA(Select) 2. 4 Last call, All voice calls or Cost left A(Select) Last Call All voice calls Cost Left Display the duration of Last call Display the sum of the duration for all the voice calls When Max cost is on, display the remaining units. For setting the Max cost, please refer to page 65. Call waiting When Call waiting is switched on, a second call can be received. Turn this function on before making a multiparty (conference) call. From Phone menu 1. 4 Call Service > Call waiting A(Select) 2. 4 Settings, Cancel or Check statusA(Select) Phone Menu 63 A100_OI_English.book Page 64 Monday, March 8, 2004 3:10 PM Withhold ID Withhold ID allows you to prevent showing your name and/or number to your calling party. From Phone menu 1. 4 Call ServiceA(Select) 2. 4 Withhold IDA(Select) NOTE: When checking the status the phone must be registered to a network. Caller's ID Caller's ID allows to display Caller's name and/or number on your display. From Phone menu 1. 4 Call ServiceA(Select) 2. 4 Caller's IDA(Select) NOTE: When checking the status the phone must be registered to a network. Charge settings Currency:
From Phone menu 1. 4 Call Service > Charge settingsA(Select) 2. 4 CurrencyA(Select) Current Setting is displayed 3. @(Set) > Enter PIN2 codeA(OK) 4.Enter currency units (max.3 characters) A(OK) Firstly, Personal rate must be entered. This is the cost that the service provider charges for one unit of call time. Please refer to "Personal rate:" on page 65. NOTE: Charge Settings is SIM dependent 64 Phone Menu A100_OI_English.book Page 65 Monday, March 8, 2004 3:10 PM Personal rate:
From Phone menu 1. 4 Call Service > Charge settings > Personal rate A(Select) 2. @(Set) 3.Enter PIN2 code A(OK) 4.Enter your personal rate A(OK) NOTE: When you set the unit price, you are asked to enter your PIN2. NOTE: This function is SIM dependent Maximum cost:
From Phone menu 1. 4 Call Service > Charge settingsA(Select) 2. 4 Max Cost A(Set) Current setting is displayed. 3. @(Edit) > Enter PIN2 code A(OK) 4. @(Set) >4 On A(Select) 5.Enter Credit Limit > A(OK) NOTE: The duration of one unit may vary between peak and off-
peak times. Call charges can be calculated accordingly. However, the actual tariffs charged from your service provider may not be reflected in the calculation. You can set the maximum cost of calls allowed. NOTE: This function is SIM dependent Phone Menu 65 A100_OI_English.book Page 66 Monday, March 8, 2004 3:10 PM Auto display From Phone menu 1. 4 Call Service > Charge settings A(Select) 2. 4 Auto displayA(On/Off) In idle mode, the latest Incoming call is displayed on your phone automatically. Call Diverts From Phone menu 1. 4 Call DivertsA(Select) 2. 4 Select the circumstances to initiate the divert A(Select) 3. 4 Set, Clear, or Check statusA(Select) 4.Enter the phone number to divert to A All voice calls Not reachable Enter the voice mail centre number if you wish incoming voice calls to be diverted to the voice mail centre when the phone is switched off. When a divert situation is enabled the divert icon (G) is displayed. When updating or checking the status of Call Divert the phone must be registered to a network. (O) Divert all incoming voice calls When the phone is disconnected, divert incoming voice calls If you do not answer the phone, divert incoming voice calls When a call is in progress, divert incoming voice calls Check the current Call Diverts status Cancel all Call Diverts settings Status check Cancel all Voice calls can be diverted to voicemail box when the phone is switched off or to the number that you specify. No reply Busy 66 Phone Menu A100_OI_English.book Page 67 Monday, March 8, 2004 3:10 PM Security Call bar Call barring restricts certain outgoing and/or incoming calls using a password supplied by your service provider. When updating/checking the status of Call bar the phone must be registered to a network. From Phone menu 1. 4 Security > Call bar A(Select) 2. 4 required setting from the table shown below A 3. 4required operation from Set, Clear or Check status A(Select) 4.Enter required password A(Select) All outgoing Outgo internat. Out. int. X home All incoming When roaming Status check Cancel all Password All Outgoing calls are barred International Outgoing calls are barred International Outgoing calls except home are barred All Incoming calls are barred All internal incoming calls when roaming outside the home Call bar status is displayed Cancel all Call bar Password Change Call bar Password Phone Menu 67 A100_OI_English.book Page 68 Monday, March 8, 2004 3:10 PM Codes Change phonecode The Phonecode is used for the SIM lock, which protects the phone from being used with a SIM other than yours. From Phone menu 1. 4 Security > Codes A(Select) 2. 4 Phone lockA(Select) 3.Enter a new Phone code A(OK) x 2 PIN control The PIN protects your SIM against unauthorised use. If you enable the PIN, every time the phone is switched on you will be prompted to enter the PIN. From Phone menu 1. 4 Security > Codes A(Select) 2. 4 PIN ControlA(Set) 3.Enter PIN number A(OK) 4. 4 Set to either enable or disable the PIN. 5. A(OK) 68 Phone Menu A100_OI_English.book Page 69 Monday, March 8, 2004 3:10 PM Changing PIN/PIN2 From Phone menu 1. 4 Security > Codes A(Select) 2. 4 Change PIN or Change PIN2 A(Select) 3.Enter the current code A(OK) 4.Enter the new code A(OK) 5.Enter the new code to verify A(OK) NOTE: To enter PUK code for PIN, enter **05# you will then be prompted to enter the PUK code, then follow the on-screen instructions. To enter PUK2 code for PIN2, enter **052# you will then be prompted to enter the PUK2 code, then follow the on-screen instructions. If the PUK/PUK2 code is entered incorrectly 10 times, the phone will cease to operate permanently. All information stored in the SIM will be lost and the SIM will need to be replaced. Contact the service provider for more details. Fixed dial From Phone menu 1. 4 Security A(Select) 2. 4 Fixed dialA(Select) 3.Enter PIN2 code A(OK) 4. A (Set) 5. 4 ON A(OK) When the Fixed dial is on, any manually dialled phone numbers must be the same as the numbers in the Fixed Dial Store, otherwise the call cannot be made. A phone number may be stored, edited or deleted. You will be prompted for your PIN2 code. The Fixed dial feature allows you to limit your outgoing calls to a certain set of numbers saved in FDN which is located in SIM. When this function is on, only the Fixed dial numbers can be dialled, and any attempts to call any other numbers will fail. Phone Menu 69 A100_OI_English.book Page 70 Monday, March 8, 2004 3:10 PM SIM lock Once you enable the SIM lock, you will be prompted to enter Phonecode when you switch on the phone with a different SIM inserted. From Phone menu 1. 4 Security A(Select) 2. 4 SIM lock A(Select) 3.Enter Phonecode A(OK) 4. A(Set) to set the SIM lock on/off 5. A(OK) NOTE: You are advised to write down your Phonecode. In case you forget your phonecode, you will need to contact your service provider to unlock the SIM. Setting From Phone menu 1. 4 NetworkA(Select) 2. 4 Select one of the settings below A(On/Off) or A(Select) Auto network New network Network list Band Set "Auto network" on or off. When "Auto Network" is on; Search an available network automatically. When "Auto network" is off, select a network manually. Create and edit a network list according to your preferences. Choose a network band: 900/1800, 900/
1900, 900, 1800, 1900MHz. NOTE: This function is SIM dependent You can select a network that is available in your current location. Network 70 Phone Menu A100_OI_English.book Page 71 Monday, March 8, 2004 3:10 PM Application Menu Application Clock Calculator Currency Melody composer
(Phone Menu*) Settings.......................P. 72 Alarm...........................P. 73 Power off time ............P. 74
* STK (SIM Application Tool Kit) is SIM dependent. Application Menu 71 A100_OI_English.book Page 72 Monday, March 8, 2004 3:10 PM Clock Settings Time zone From Application menu 1. 4 Clock > Settings > Time zoneA(Select) 2. 4 required region A(Select) 3. 4. 5.
"Day light saving?" A(Yes) or @(No)
"Set this zone to local" @(OK)
"Success!" A(OK) Time & date From Application menu 1. 4 Clock > Settings > Time & dateA(Select) 2. @(Set) to enter the date and the timeA(OK) Date format Display format for time and date can be selected. From Application menu 1. 4 Clock > Settings > Date formatA(Set) 2. 4 required format A(Select) 72 Application Menu A100_OI_English.book Page 73 Monday, March 8, 2004 3:10 PM Time format From Application menu 1. 4 Clock > Settings > Time formatA(Set) 2. 4 required format A(Select) Display time From Application menu 1. 4 Clock > SettingsA(Select) 2. 4 Display timeA(On/Off) Time and date can be shown on the display in idle mode. Alarm From Application menu 1. 4 Clock > Alarm A(Set) 2. A(Set) > Enter the time (24 hour clock) A(OK) 3. 4 Repeat daily, Once or Disabled A(Select) 4.
"Alarm time has been updated!" A(OK) The alarm set indicator appears on the idle display. When the set time is reached, the alarm will sound. When in a call the phone will vibrate without sound. To stop the alarm:
Press any key or A(Off) OR
@(Pause) to pause the alarm and start again after 5 minutes NOTE: Even if the phone is switched off, when the Alarm is set on, the phone will automatically power on and start the alarm. Application Menu 73 A100_OI_English.book Page 74 Monday, March 8, 2004 3:10 PM Power off time From Application menu 1. 4 Clock > Power off timeA(Set) 2.Enter the time (24 hour clock) A(OK) 3. 4 Repeat daily, Once or Disabled A(Select) 4. The phone can be set to turn itself off automatically at a specified time using the Power off feature.
"Power off time updated!" A(OK) Calculator The four function calculator (addition, subtraction, multiplication and division) is available to make simple arithmetic calculations. From Application menu 1. 4 CalculatorA(Select) 2.Enter a number (maximum 9 digits) and it will be displayed on the upper right of the display. When a decimal point is required, press !, when a minus sign is needed press ". 3. 4 to select the arithmetic operation 4.Enter a number (maximum 9 digits) and it will be displayed next to the operation symbol. If 4 is used to select another arithmetical operation to perform, an intermediate calculation will be performed and the result will be displayed. 5. A (=) to calculate 74 Application Menu A100_OI_English.book Page 75 Monday, March 8, 2004 3:10 PM Currency Rate setting The currency convertor enables you to convert from/to a home currency using a conversion rate that you enter. Before beginning conversions, choose a base currency and enter the conversion rate. The base currency rate is set to 1. From Application menu 1. 4 CurrencyA(Select) 2. 4 Rate setting A(Select) 3.Enter the conversion rate next to the pencil icon A(OK) 4. A(Save) You can change the base currency by pressing 4. When a decimal point is required press !
Rate computing From Application menu 1. 4 CurrencyA(Select) 2. 4 Rate computingA(Select) 3.Enter the amount of your cu rrency to convert into the other currency A(Convert) You can change the base currency by pressing 4. When a decimal point is required press !
Application Menu 75 A100_OI_English.book Page 76 Monday, March 8, 2004 3:10 PM Melody composer Composing a melody From Application menu 1. 4 Melody Composer A(Select) 2. 4 required My MusicA(Select) 3. 4 Melody edit A(Select) 4. 4 required track A(Select) 5.Compose your melody - See the notes chart below A(Menu) 6. 4 Save A(Select) Using the following table as a reference, enter notes (from the choice of low, middle and high), rests, and duration of each, to generate your composition. Main Track and Sub Tracks are played together when you play the composed music. Key $% & ' ( ) FuncCDEFG A Key * +,# " !
Func B Rep.Dotted Rest Duration Low #
note Middle #
High #
Play To play the composed melody before saving:
A(Menu) > 4 Play A(Select) 76 Application Menu A100_OI_English.book Page 77 Monday, March 8, 2004 3:10 PM Tempo Before you save the composed melody, you can change the tempo, and/or the instrument to play the melody. To arrange the tempo of the composed melody:
1. A(Menu) > 4 TempoA(Select) 2. 4 required Tempo A(Select) Select instrument To select the instrument to play the composed melody:
A(Menu) > 4 Select instrumentA(Select) Application Menu 77 A100_OI_English.book Page 78 Monday, March 8, 2004 3:10 PM Records Menu Records Last dialled Answered Unanswered Delete all Last dialled/Answered/Unanswered number From Records menu 1. 4 Choose one menu from Last dialled, Answered or UnansweredA(Select) OR In idle mode, C to view the last dialled numbers directly 2. 4 required phone number (or name) you wish to redial C Recently dialled phone numbers will be stored in Last dialled.
(Max 50) If an incoming call with Caller's ID is answered the number will be stored in Answered. (Max 50) If an incoming call with Caller's ID is not answered the number will be stored in Unanswered. (Max 20) 78 Records Menu A100_OI_English.book Page 79 Monday, March 8, 2004 3:10 PM Delete all From Records menu 1. 4 Delete all A(Select) 2.
"Delete all calls?" A(No) or @(Yes) Records Menu 79 A100_OI_English.book Page 80 Monday, March 8, 2004 3:10 PM Troubleshooting Should any problem persist contact your dealer. Problem CauseRemedy Phone will not switch on. Extremely short battery life for a new battery. Check that the battery is fully charged and correctly connected to the phone. The network you are using and the condition of the battery can affect battery life. The battery has worn out.Replace with a new fully charged Short battery life for an old battery. The charging indicator does not light, the battery level indicator does not appear and the phone cannot be switched on when charging. Battery fails to charge. The battery is not attached The battery is not attached to the phone or when the battery has been deeply discharged the phone will take a short time until the indicator lights. battery. Leave the phone charging the battery for a few minutes before the indicator is lit and attempting to switch it on. Ensure the battery is fitted to the phone prior to commencing charging. to the phone. Battery has been connected to the phone after the Fast Travel Charger has been switched on. Calls cannot be made. The phone is locked.Unlock the phone. Outgoing calls are barred.Disable the outgoing call barring or The phone is not registered to a network. Calls cannot be made from Fixed Dial Store. 80 Troubleshooting barred dial. Move to a coverage area and operate your phone after it has registered with a network. Check whether your SIM supports Fixed dial. Check if the Fixed dial is switched on. Check whether the phone number is stored in the Fixed Dial. A100_OI_English.book Page 81 Monday, March 8, 2004 3:10 PM Problem Calls cannot be received. Switch the phone on. CauseRemedy The phone is not switched on. Incoming calls are barred.Disable the incoming call barring. The phone is not registered to a network. Emergency calls cannot be made. You are not in a GSM coverage area. Move to a coverage area and operate your phone after it has registered with a network. Check that the antenna symbol is displayed - move to a coverage area and operate your phone when the antenna symbol is displayed. Phone numbers cannot be recalled from Contacts list. The phone is locked.Unlock the phone. Phone number has been restricted. Switch off restriction. Troubleshooting 81 A100_OI_English.book Page 82 Monday, March 8, 2004 3:10 PM Important Error Messages These are some of the most important error messages which may be displayed:
New Codes Not SameWhen you change your password, you have to enter the new password twice to confirm. The two codes you entered are not the same. Please enter the same code twice. Password InvalidThe password that you ent correct password. ered is not valid. Please enter the New PIN Not AcceptedYour new PIN c New PIN2 Not AcceptedYour new PIN2 code is not accepted. Please try again. Incorrect Entry!You entered your PIN or PIN2 incorrectly. Please enter the ode is not accepted. Please try again. correct one. Entries Do Not Match!When you change your password, you have to enter the new password twice to confirm. The two codes you entered are not the same. Please enter the same code twice. Invalid PasswordThe reply message from net work when you activate call barring with incorrect password. Please enter the correct password. SIM Service Not SupportThe function you se lected is not supported by your service SIM Not Enough Space!
Continue?
Not Enough Space!
Continue?
Authentication FailureYour SIM card is not r provider. Please contact your service provider. The SIM storage area is Full. If you continue data may be lost. Please delete old records. The message storage area is Full. If you continue data may be lost. Please delete old records egistered to your service provider. Please contact your service provider. BlockedYour SIM card is blocked. Pl ease contact your service provider. 82 Important Error Messages A100_OI_English.book Page 83 Monday, March 8, 2004 3:10 PM Glossary of Terms DTMF GSM Network Operator Password PIN PIN2 PUK/PUK2 Registration Roaming Service Provider SIM SMS Dual Tone Multi-Frequency tones allow you to communicate with computerised phone systems, voice mailboxes, etc. Global System for Mobile communications. The name given to the advanced digital technology that your phone uses. The organisation responsible for operating a GSM network. Used for the control of Call Bar. Personal Identification Number used for SIM security. Supplied by your service provider. If the PIN is entered incorrectly 3 times, the PIN will be blocked. Personal Identification Number used for the control of Fixed Dial Store and Call Charge metering. If the PIN2 is entered incorrectly 3 times, the PIN2 will be blocked. The PIN2 is supplied by your service provider. PIN/PIN2 Unblocking Key. Used to unblock the PIN/PIN2. Supplied by your service provider. If the PUK/PUK2 is entered incorrectly 10 times, the PUK/PUK2 will be blocked. The act of locking on to a GSM/GPRS network. This is usually performed automatically by your phone. The ability to use your phone on networks other than your Home network. The organization responsible for pr oviding access to the GSM/GPRS network. Subscriber Identity Module. A small smart-card which stores unique subscriber and user-entered information such as Phonebook and Short Messages. Supplied by your service provider. Short Message Service. A basic mail system used for cellular phones. This service allows sending / receiving short text messages. Glossary of Terms 83 A100_OI_English.book Page 84 Monday, March 8, 2004 3:10 PM Specifications Bands Supported....................................GSM 900 Class 4 GSM1800 Class 1 GSM1900 Class 1 Standby Time (hrs)*................................Up to 230 Talk Time (hrs)*.......................................Up to 8 Temperature Range Charging..........................................+5C ~ +35C Storage............................................-20C ~ +60C Weight.....................................................66 g (including battery) Dimensions Height..............................................77 mm Width...............................................44 mm Depth...............................................17.8 mm Supply Voltage........................................3.7 V (780 mAh Li-ion) Antenna...................................................Fixed Charge Time**.........................................Up to 150 Min SIM Type.................................................3 V only Phonebook Memory................................250 entries + SIM Animation Themes..................................2 User Composed Melody..........................5 Games.....................................................2 Backlight Colours....................................1 (Blue) Ring Tones..............................................Preset: 15
(Varies depending on Data Folder) Scheduler................................................Up to 50 entries Alarms.....................................................1 Maximum Graphics Size.........................Main: W112 x H64 pixels
(monochrome) NOTE: Specifications are subject to change without notice.
*Talk and Standby time depend on network conditions, SIM usage and battery condition.
**Charging time depends on usage and battery condition. NOTE: PIN2 code and PUK2 code will be supported by your service provider. 84 Specifications A100_OI_English.book Page 85 Monday, March 8, 2004 3:10 PM Licensing CP8 Patent Panasonic Mobile Communications Co., Ltd. 2004 Information in this document is subject to change without notice. No part of these instructions may be reproduced or transmitted in any form or by any means without obtaining express permission from Panasonic Mobile Communications Co., Ltd. Tegic T9 is a trademark of Tegic Communications Inc.T9R Text Input is licenced under one or more of the following: U.S. Pat. Nos. 5,818,437, 5,953,541, 5,187,480, 5,945,928 and 6,011,554; Canadian Pat. No. 1,331,057; United Kingdom Pat. No. 2238414B; Hong Kong Standard Pat. No. HK0940329;
Republic of Singapore Pat. No. 51383; Euro. Pat. No. 0 842 463 (96927260.8) DE/DK, FI, FR, IT, NL, PT, ES, SE, GB; and additional patents are pending worldwide. Licensing 85
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2004-07-09 | 1850.2 ~ 1909.8 | PCE - PCS Licensed Transmitter held to ear | Class II permissive change or modification of presently authorized equipment |
2 | 2004-05-06 | 1850.2 ~ 1909.8 | PCE - PCS Licensed Transmitter held to ear | |
3 | 2004-03-31 | 1850.2 ~ 1909.8 | PCE - PCS Licensed Transmitter held to ear | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 3 | Effective |
2004-07-09
|
||||
1 2 3 |
2004-05-06
|
|||||
1 2 3 |
2004-03-31
|
|||||
1 2 3 | Applicant's complete, legal business name |
Quanta Computer Inc
|
||||
1 2 3 | FCC Registration Number (FRN) |
0006267215
|
||||
1 2 3 | Physical Address |
No. 188, Wenhua 2nd Road, Guishan District
|
||||
1 2 3 |
Taoyuan City, N/A 33377
|
|||||
1 2 3 |
Taiwan
|
|||||
app s | TCB Information | |||||
1 2 3 | TCB Application Email Address |
h******@americantcb.com
|
||||
1 2 3 |
h******@AmericanTCB.com
|
|||||
1 2 3 |
h******@americanTCB.com
|
|||||
1 2 3 | TCB Scope |
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
||||
app s | FCC ID | |||||
1 2 3 | Grantee Code |
HFS
|
||||
1 2 3 | Equipment Product Code |
A100
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 3 | Name |
J****** K****
|
||||
1 2 3 | Telephone Number |
+886-******** Extension:
|
||||
1 2 3 | Fax Number |
+886-********
|
||||
1 2 3 |
j******@quantatw.com
|
|||||
app s | Technical Contact | |||||
1 2 3 | Firm Name |
Sportan International Inc.
|
||||
1 2 3 |
Sporton International Inc.
|
|||||
1 2 3 | Name |
D******** L****
|
||||
1 2 3 | Physical Address |
No. 52 Haws-Ya 1st Rd.
|
||||
1 2 3 |
No.52, Hwa-Ya 1st Rd.
|
|||||
1 2 3 |
No. 52, Hwa-Ya 1st Rd., Hwa Ya Technology Park
|
|||||
1 2 3 |
Taoyuan, 333
|
|||||
1 2 3 |
Tao Yuan Hsien, 333
|
|||||
1 2 3 |
Taiwan
|
|||||
1 2 3 | Telephone Number |
+886-******** Extension:
|
||||
1 2 3 |
886-3******** Extension:
|
|||||
1 2 3 |
+886 ******** Extension:
|
|||||
1 2 3 | Fax Number |
+886-********
|
||||
1 2 3 |
886-3********
|
|||||
1 2 3 |
+886 ********
|
|||||
1 2 3 |
D******@sportan.com.tw
|
|||||
1 2 3 |
D******@sporton.com.tw
|
|||||
1 2 3 |
d******@sporton.com.tw
|
|||||
app s | Non Technical Contact | |||||
1 2 3 | Firm Name |
Sporton International Inc.
|
||||
1 2 3 | Name |
D****** L********
|
||||
1 2 3 | Physical Address |
No.52, Hwa-Ya 1st Rd.
|
||||
1 2 3 |
Tao Yuan Hsien, 333
|
|||||
1 2 3 |
Taiwan
|
|||||
1 2 3 | Telephone Number |
886-3******** Extension:
|
||||
1 2 3 | Fax Number |
886-3********
|
||||
1 2 3 |
D******@sporton.com.tw
|
|||||
app s | Confidentiality (long or short term) | |||||
1 2 3 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
1 2 3 | Yes | |||||
1 2 3 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 3 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 3 | Equipment Class | PCE - PCS Licensed Transmitter held to ear | ||||
1 2 3 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | PCS Band GSM Phone | ||||
1 2 3 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 3 | Modular Equipment Type | Does not apply | ||||
1 2 3 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment | ||||
1 2 3 | Original Equipment | |||||
1 2 3 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 2 3 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 3 | Grant Comments | Power Output is EIRP. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and which provide at least 15mm separation between the device and the users body. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR values are: Head: 0.79 W/kg; Body-worn 0.21 W/kg. This filing is only applicable for 1900 MHz PCS operations | ||||
1 2 3 | Power Output is EIRP. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and which provide at least 15 mm separation between the device and the users body. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR values are: Head: 0.79 W/kg; Body-worn 0.16 W/kg. This filing is only applicable for 1900 MHz PCS operations | |||||
1 2 3 | Power Output is EIRP. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and which provide at least 15mm separation between the device and the users body. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR values are: Head: 0.79W/kg; Body-worn 0.16W/kg. Territories. This filing is only applicable for 1900 MHz PCS operations | |||||
1 2 3 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 3 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 3 | Firm Name |
SPORTON International Inc
|
||||
1 2 3 |
Sporton International Inc.
|
|||||
1 2 3 | Name |
K******** L****
|
||||
1 2 3 | Telephone Number |
886-2******** Extension:
|
||||
1 2 3 | Fax Number |
886-2********
|
||||
1 2 3 |
k******@sporton.com.tw
|
|||||
1 2 3 |
k******@sporton.com.tw
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 24E | BC | 1850.20000000 | 1909.80000000 | 0.5020000 | 0.0400000000 ppm | 300KGXW | |||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 24E | BC | 1850.20000000 | 1909.80000000 | 0.5020000 | 0.0400000000 ppm | 300KGXW | |||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 24E | BC | 1850.20000000 | 1909.80000000 | 0.5020000 | 0.0400000000 ppm | 300KGXW |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC