B82 User Manual User Manual Device layout figure MICRO USB connector Touch screen 2M CAMERA 2M CAMERA LIGHT SENSOR LIGHT SENSOR 5M CAMERA DOCKING connector DC JACK DC JACK Headset plug VOLUME BUTTON SIM card socket
(3G only) Micro SD socket SD DOOR POWER BUTTON HOME BUTTON SPEAKER Buttons Buttons Power Power Button Function Press and hold to turn the device on or off. Press and hold to turn the device on or off. Press and hold to turn the device on or off. Press and hold to turn the device on or off. Press and hold for 8 Press and hold for 8-10 seconds to reset the device if it has fatal errors or hang has fatal errors or hang-ups, or freezes. Home Press to return to the Home screen. Press to return to the Home screen. Press and hold to open the list of recent applications. Press and hold to open the list of recent applications. Volume Press to adjust the device volume. Press to adjust the device volume. Socket and Other Device and Other Device Name Function Docking connector For the connection with docking station; USB/
For the connection with docking station; USB/
headphone/ UART interface included Charger Jack Connect to power adapter for battery charging Connect to power adapter for battery charging USB connector Connect to USB devices, Connect to USB devices, such as USB memory module, USB KB, USB mouse, etc. mouse, etc. Headset jack Connect to audio headset Connect to audio headset SIM card socket SD card socket Only for 3G configuration unit; inserting the Only for 3G configuration unit; inserting the uSIM card to enable 3G communication function enable 3G communication function Support the Micro SD memory card (maximum capacities:
Support the Micro SD memory card (maximum capacities:
64 GB) 64 GB) Speaker Internal speaker Light sensor in Light sensor, LCD brightness automatically Built-in Light sensor, adjusted according to the environment adjusted according to the environment lightness 2M/5M Camera Built-in front 2M Camera, Built Camera, Built-in rear 5M Camera Charging the battery Charging the battery Use the charger to charge the battery before using it for the first time Use the charger to charge the battery before using it for the first time. This device doesnt design the charging via USB socket. Please use only This device doesnt design the charging via USB socket. Please use provided chargers to charge battery. Unapproved chargers or device-provided chargers to charge battery. cables can cause the battery to explode or damage the device. cables can cause the battery to explode or damage the device. cables can cause the battery to explode or damage the device. cables can cause the battery to explode or damage the device. Inserting a memory card Inserting a memory card Device accepts memory cards with maximum capacities of 64 GB accepts memory cards with maximum capacities of 64 GB. 1. Insert a memory card with the gold 1. Insert a memory card with the gold Insert a memory card with the gold-coloured contacts facing downwards. Insert a memory card with the gold-coloured contacts facing downwards. 2. Push the memory card into the slot until it locks in place. Push the memory card into the slot until it locks in place. Using the touch screen Using the touch screen Only fingers applicable to the touch screen damage, do not tap it with anything sharp or with your fingertips. do not tap it with anything sharp or apply excessive pressure to it touch screen. To avoid the touch screen Tapping: To select a menu item or open an screen button, or to enter a character by using it with a finger. open an application by pressing an on-
a character by using the on-screen keyboard, tap Dragging: To move an icon, thumbnail, or preview to a new location, tap Dragging: To move an icon, thumbnail, or preview to a new location, tap and hold it and drag it to the target position position. Double-tapping: Double-tap on a webpage, map, or image to zoom in a tap on a webpage, map, or image to zoom in a part. Double-tap again to return. part. Double-tap again to return. Flicking: Flick left or right on the Home screen or the Applications screen Flicking: Flick left or right on the Home screen or the Applications screen down to scroll through a webpage or a list. to see another panel. Flick up or down to scroll through a webpage or a Pinching: Spread two fingers apart on a webpage, map, or image to zoom Pinching: Spread two fingers apart on a webpage, map, or image to zoom in a part. Pinch to zoom out. Federal Communication Commission Interference Statement Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency interference in a residential installation. This equipment generates, uses and can radiate radio frequency interference in a residential installation. This equipment generates, uses and can radiate radio frequency interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver. Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. located or operating in conjunction with any other antenna or transmitter. Continued FOR PORTABLE DEVICE USAGE (<20cm from body/SAR needed) FOR PORTABLE DEVICE USAGE (<20cm from body/SAR needed) Radiation Exposure Statement:
This device meets the governments requirements for exposure to radio waves. This device meets the governments requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for wireless device employs a unit of measurement known as the Specific Absorption The exposure standard for wireless device employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. *Tests for SAR are conducted using standard operating Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. *Tests for SAR are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands. FOR COUNTRY CODE SELECTION USAGE (WLAN DEVICES COUNTRY CODE SELECTION USAGE (WLAN DEVICES) Note: The country code selection is for non-US model only and is not available to all US model. Per FCC Note: The country code selection is for non-US model only and is not available to all US model. Per FCC US model only and is not available to all US model. Per FCC US model only and is not available to all US model. Per FCC regulation, all WiFi product marketed in US must fixed to US operation channels only. product marketed in US must fixed to US operation channels only. System specification System specification System specification System specification Voltage/ Current: Voltage 5V, Maximum current 2A 5V, Maximum current 2A AC Adapter Input voltage range / Frequency DC Output5V, 2A 100 ~ 240 V AC, 50/60 Hz Trade name / Model : APD / WB-10E05FU Trade name / Model : APD / WB-10E05FU 10E05FU-DAAA 10E05FU-DAAA Battery Built-in Lithium-ion Polymer rechargeable battery rechargeable battery Capacity: 4800 mAh