FCC ID: HFSG021A Wireless Module

Get started in three simple steps:

1. Turn on your device. Your device is ready to go, straight out of the box. Just hold down the power button to turn it on. 2. Connect to Wi-Fi and sign in. Connect to your Wi-Fi and follow the onscreen steps. Then sign in with your account. 3. Get going. Have fun. Personalize your device with your favorite apps, photos, games and more. Regulatory Information: United States Regulatory information, certification, and compliance marks specific to the device can be found on your device under Settings > About. FCC Regulatory Compliance Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the Increase the separation between the equipment and receiver. receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the manufacture could void your authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following 2 conditions:

1. These devices may not cause harmful interference. 2. These devices must accept any interference received, including interference that may cause undesired operation. Model: G021A FCC ID: HFSG021A Manufacturer info. Manufacturer: Google LLC, 1600 Amphitheatre Parkway, Mountain View, CA, USA, 94043 Radio Frequency Exposure This device meets the U.S. Federal Communications Commission's (FCC) requirements for exposure to radio waves and is designed and manufactured not to exceed the FCC's emission limits for exposure to radiofrequency (RF) energy. To comply with FCC RF exposure compliance requirements, this device must not be co-located or operating in conjunction with any other antenna or transmitter. Specific Absorption Rate (SAR) Information This device is also designed to meet the requirements for exposure to radio waves established by the FCC. The SAR limit adopted by the FCC is 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported to the FCC for this device type complies with this limit. Regulatory Information: Canada Innovation, Science and Economic Development Canada (ISED), Class B This Class B digital apparatus complies with Canadian ICES-003. CAN ICES-3(B)/NMB-3(B). Notice: ISED regulations provide that changes or modifications not expressly approved by the manuafcture could void your authority to operate this equipment. ISED Notices This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas license-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference; and

(2) This device must accept any interference, including interference that may cause undesired operation of the device. The device for operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;

Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes:

(1) l'appareil ne doit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement."

Les dispositifs fonctionnant dans la bande de 5 150 5 250 MHz sont rservs uniquement pour une utilisation l'intrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux. SAR Information The output power of the radio technology used in the Device is below the radio frequency exposure limits set by ISED for an uncontrolled environment. La puissance de sortie de la technologie radio utilise dans le priphrique est infrieure aux limites d'exposition aux frquences radio dfinies par ISED Canada pour un environnement non contrl.

In Manual On e-label Information Yes No No No 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) this device must accept any interference received, including E-label Declaration FCC 2.935 Electronic labeling of radiofrequency devices.

(a) Any radiofrequency device equipped with an integrated electronic display screen, or a radiofrequency device without an integrated screen that can only operate in conjunction with a device that has an electronic display screen, may display on the electronic display the FCC Identifier, any warning statements, or other information that the Commissions rules would otherwise require to be shown on a physical label attached to the device. No FCC ID number 15.19 Statement (This device complies with part Yes interference that may cause undesired operation.) Yes Class B Digital Device user manual statement Caution to the user that changes or modifications Yes not expressly approved by the party responsible for compliance could void the users authority to operate the equipment Image of the e-label screen is provided below:

Contains FCC ID: HFSG021A Made in China

(b) Devices displaying their FCC Identifier, warning statements, or other information electronically must make this information readily accessible on the electronic display. Users must be provided with prominent instructions on how to access the information in the operating instructions, inserts in packaging material, or other easily accessible format at the time of purchase. The access instructions may also be provided via the product-related Web site, if such a Web site exists; the packaging material must provide specific instructions on how to locate the website information, and a copy of these instructions must be included in the application for equipment certification. The instruction on how to access the information is in the inbox Safety/warranty/Regulatory booklet and online version:

Regulatory information, certification, and compliance marks can be found in the device settings menu: Settings > About

(c) Devices displaying their FCC Identifier, warning statements, or other information electronically must permit access to the information without requiring special codes, accessories or permissions and the access to this information must not require more than three steps from the device setting menu. The number of steps does not include those steps for use of screen locks, passcodes or similar security protection designed to control overall device access. No special accessories or supplemental plug-ins are required to access the information. To access the e-label information, in the device settings menu:

Select: settings > About

(d) The electronically displayed FCC Identifier, warning statements, or other information must be displayed electronically in a manner that is clearly legible without the aid of magnification;

Yes

(e) The necessary label information must be programmed by the responsible party and must be secured in such a manner that third-parties cannot modify it. The e-label information is pre-programmed by the grantee. The user cannot modify the e-label information.

(f) Devices displaying their FCC Identifier, warning statements, or other information electronically must also be labeled, either on the device or its packaging, with the FCC Identifier or other information (such as a model number and identification of a webpage that hosts the relevant regulatory information) that permits the devices to be identified at the time of importation, marketing, and sales as complying with the FCCs equipment authorization requirements. Devices can be labeled with a stick-on label, printing on the packaging, a label on a protective bag, or by similar means. Any removable label shall be of a type intended to survive normal shipping and handling and must only be removed by the customer after purchase. The FCC ID is present on the product packaging.

Quanta Computer Inc No. 188, Wenhua 2nd Road, Guishan District, Taoyuan City 33377, Taiwan Tel: +886-3-3272345, Fax: +886-3-3961334 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd Columbia MD 21046-1609 SUBJECT: Class II Permissive Change for FCC ID: HFSG021A The intension of this application is to enable the modular FCC ID: HFSG021A, granted on 07/24/2019 to be integrated in Computing Device, Model: G021A. Power reduction as given in the max conducted output power table in order to comply with SAR requirement. The module installed into host platform mentioned above is electronically and mechanically identical to the original certified module. The Original FCC testing on module under FCC ID: HFSG021A was performed with an antenna of higher gain, and the antenna was connected to the module in an open environment. The current host platform under application uses an antenna of the same type but of lower gain and is installed inside the host platform enclosure. The physical restraints introduced by the host platform should have resulted in equal or lower level of radiated emission. Therefore, additional Radiated emission testing is not necessary. Software security remains unchanged from the original application. Sincerely yours, Joyce Kuo joyce.kuo@quantatw.com

Quanta Computer Inc No. 188, Wenhua 2nd Road, Guishan District, Taoyuan City 33377, Taiwan Tel: +886-3-3272345, Fax: +886-3-3961334 Date: August 14, 2019 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Request for Confidentiality FCC ID: HFSG021A To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commissions rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure indefinitely. Operational Description Antenna Spec Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission s policy, in order to comply with the marketing regulations in 47 CFT 2.803 and the importation rules in 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachment(s) for 180 days after granted as outlined in Public Notice DA 04-1705. Test Setup Photos User Manual External Photos Internal Photos Best Regards, ______________________ Joyce Kuo joyce.kuo@quantatw.com It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued.

QuantaComputerInc No.188,Wenhua2ndRoad,GuishanDistrict,TaoyuanCity33377,Taiwan Tel:+88633272345,Fax:+88633961334 Date:July18,2019 ToWhomItMayConcern:

PleasebenotifiedthatI,JoyceKuo,havedesignatedJonesTsaiofSportonInternationalInc.with responsibilityforthisproject,includingtosignForm731andotherdocumentationrelatedtothis application. AnyandallactscarriedoutbyJonesTsaionthemattersrelatedtoprocessesorcommunications requiredtoobtainFCCapproval,shallhavethesamelegalauthorityasactsonmyownbehalf. Ifurthercertifythatneithertheapplicantnoranypartytothisapplication,asdefinedin47C.F.R. 1.2002(b),issubjecttoadenialtoFederalbenefits,includingFCCbenefits,pursuanttosection 5301oftheAntiDrugAbuseActof1998,21U.S.C.862. Thisauthorizationislimitedtothefollowingproduct:FCCIDHFSG021A Shouldyouhaveanyquestions,pleasedonothesitatetocontactme. Sincerelyyours, JoyceKuo joyce.kuo@quantatw.com

QuantaComputerInc No.188,Wenhua2ndRoad,GuishanDistrict,TaoyuanCity33377,Taiwan Tel:+88633272345,Fax:+88633961334 Date:July18,2019 HFSG021A CertificationApplication FederalCommunicationsCommission OfficeofEngineeringandTechnologyLaboratoryDivision 7435OaklandMillsRd ColumbiaMD210461609 RE:

FCCID:

ToWhomItMayConcern, Pursuanttosections0.457and0.459ofCFR47,PublicNoticeDA041705oftheCommission's policy,andtoavoidprematurereleaseofsensitiveinformationpriortomarketingorreleaseofthe producttothepublic,theapplicantrequeststhefollowingdocumentscontainedinthiscertification applicationbetemporarilywithheldfrompublicdisclosureforaninitialperiodof180days:

ExternalPhotos Theapplicationcontainstechnicalinformation,whichtheapplicantdeemstobetradesecretsand proprietary.Ifmadepublic,theinformationmightbeusedtothedisadvantageoftheapplicantin themarketplace. Sincerely, JoyceKuo joyce.kuo@quantatw.com 1/1

Federal Communications Commission 7435 Oakland Mills Road Columbia, Maryland 21046 USA Re: Change of Identification Authorization, FCC ID: PD99260D2L Date: June 5, 2019 To Whom It May Concern:

This letter grants authorization for representatives of Quanta Computer Inc to apply to the FCC for a change in identification as specified under 47CFR2.933 of the FCC rules. This authorization applies to the Intel Corporation, Intel Wireless- AC 9260, 802.11a/b/g/n/ac+

BT M.2 (model: 9260D2WL), FCC ID: PD99260D2L, original grant date: 02/05/2019. We are aware that Quanta Computer Inc intends to market the above referenced product under their FCC ID: HFSG021A. Sincerely, Steven C. Hackett Wireless Product Regulatory Engineer iCDG Regulatory steven.c.hackett@intel.com Intel Corporation 2111 NE 25th Avenue JF3-302 Hillsboro, OR 97124

QuantaComputerInc No.188,Wenhua2ndRoad,GuishanDistrict,TaoyuanCity33377,Taiwan Tel:+88633272345,Fax:+88633961334 Date:July18,2019 FederalCommunicationsCommission OfficeofEngineeringandTechnologyLaboratoryDivision 7435OaklandMillsRd ColumbiaMD210461609 Re:ChangeofIdentificationRequest ToWhomItMayConcern:

PursuanttoSection2.933(b)oftheCommissionsrules,QuantaComputerIncherebyseeksanewFCCIDof HFSG021Aforacurrentlyapproveddeviceforthepurposeofmarketing.TheoriginalgranttoIntelCorporation willremainineffect. PerSection2.933(b):

1.TheoriginalidentificationisPD99260D2L. 2.Theoriginalgrantdateis02052019. 3.Theequipmentiselectricallyidentical.OnlythetradenameandFCCIDnumberaredifferent. 4.Theoriginaltestresultsareapplicableandrepresentativeofthisdevice. 5.Exteriorphotographsareincludedinthisapplication. Thefollowingfilesareelectronicallysubmittedasattachments:

Sincerelyyours, JoyceKuo joyce.kuo@quantatw.com CoverLetter ExternalPhotos FCCIDlabelformatandlocation