GD100 Usermanual GD100UserManual GSM/GPRS/GPSTracker TRACGD100UM001 Version:R1.02 GD100 TRACGV3SUM001 1 GD100UserManual DocumentTitle GD100UserManual Version Date Status R1.02 20160222 Release DocumentControlID TRACGD100UM001 GeneralNotes Queclink offers this information as a service to its customers, to support application and engineering efforts that use the products designed by Queclink. The information provided is baseduponrequirementsspecificallyprovidedtoQueclinkbythecustomers.Queclinkhasnot undertaken any including any information that may be in the customers possession. Furthermore, system validation of this productdesignedbyQueclinkwithinalargerelectronicsystemremainstheresponsibilityofthe customer orthe customers system integrator. All specifications supplied hereinare subject to change. independent search for additional relevant information, Copyright This document contains proprietary technical information which is the property of Queclink WirelessSolutionsCo.,Ltd.Thecopyingofthisdocumentandgivingittoothersandtheusingor communicationofthecontentsthereof,areforbiddenwithoutexpressauthority.Offendersare liable to the payment of damages. All rights reserved in the event of grant of a patent or the registrationofautilitymodelordesign.Allspecificationsuppliedhereinaresubjecttochange withoutnoticeatanytime. AnyChangesormodificationsnotexpresslyapprovedbythepartyresponsiblefor compliancecouldvoidtheusersauthoritytooperatetheequipment. Thisdevicecomplieswithpart15oftheFCCRules.Operationissubjecttothefollowingtwo conditions:(1)Thisdevicemaynotcauseharmfulinterference,and(2)thisdevicemust acceptanyinterferencereceived,includinginterferencethatmaycauseundesiredoperation. TRACGD100UM001 2 GD100UserManual Contents Contents............................................................................................................................................3 0RevisionHistory..............................................................................................................................6 1Introduction...................................................................................................................................7 1.1.Reference.............................................................................................................................7 2ProductOverview...........................................................................................................................8 2.1.Appearance.........................................................................................................................8 2.2.Button/Switch/USBInterfaceDescription...........................................................................8 2.3.LEDDescription...................................................................................................................9 2.4.UDISKBufferFile...............................................................................................................10 3.GettingStarted............................................................................................................................11 3.1.Partlist...............................................................................................................................11 3.2.Turnon/Turnoff................................................................................................................11 4TroubleshootingandSafetyInfo..................................................................................................12 4.1.Troubleshooting.................................................................................................................12 4.2.SafetyInfo..........................................................................................................................12 TRACGD100UM001 3 GD100UserManual TableIndex TABLE1. TABLE2. GD100PROTOCOLREFERENCE........................................................................................7 GD100LEDDESCRIPTIONTABLE......................................................................................9 TRACGD100UM001 4 GD100UserManual FIGURE1. APPEARANCEOFGD100..................................................................................................8 FigureIndex TRACGD100UM001 5 GD100UserManual 0 RevisionHistory Revision 1.00 1.01 1.02 Author Date 20151223 DocterXu 20160107 BlackChen 20160222 BlackChen Descriptionofchange InitialRelease ModifyPWRLEDdescription ModifyLEDdescription TRACGD100UM001 6 GV55Usermanual 1 Introduction GD100 is a powerful GPS tracker designed for fixed asset tracking applications. It works with three CR123A lithiumbatteries and will operate for 60days with reading date and reporting four(4) times per day. With builtin temperature sensor, GD100 will detect the outside temperature and trigger warning messages when outside temperature is out of operating temperatureranges2085.Andalso,GD100supportslightdetectionandcantriggereven messagesbylightsensor.Basedintegrated@trackprotocol,theGD100cancommunicatewitha backend server through the GPRS/GSM network to transfer reports of emergency, geofence boundary crossings, low battery or scheduled GPS position along with many other useful functions.SystemIntegratorscaneasilysetuptheirtrackingsystemsbasedonthefullfeatured
@Trackprotocol. 1.1. Reference SN Documentname
[1] GD100@TrackAirInterfaceProtocol Table1. GD100ProtocolReference Remark The air protocol interface between GD100andbackendserver. TRACGD100UM001 7 GV55Usermanual 2 ProductOverview 2.1. Appearance 1313 Figure1. AppearanceofGD100 2.2. Button/Switch/USBInterfaceDescription USB Port/Power Switch Description START/STOP Button Start: When START button is pressed time command start the device enters after received real ACT, countdown mode. Stop: When STOP button is pressed, the device will not monitor temperature anymore. At this stage, DATA light and TEMP light will turn green and be solid on, and other lights will work normally. After all the recorded messages are sent out to server, DATA green light and TEMP Green light will be solid on and the other lights will be off, which means the recording has stopped working. TRACGD100UM001 8 GD100Usermanual USB Port Toggle Switch 2.3. LEDDescription If the battery switch is on, it will work as a serial port for configuration. If battery switch is off, it will work as a mass storage. Note:
If you want to change work mode of USB, you need to reboot the device. Turn on GD100 when switch to ON. Turn off GD100 when switch to OFF. There are five LEDs on GD100, the description as follows. Table2. GD100LEDDescriptionTable LED CELL
(Green) GPS
(Green) PWR
(Green) TEMP
(Green Red) DATA
(Green Red)
&
&
Device status Device is searching GSM network. Device has registered to GSM network. SIM card needs pin code to unlock. Receive a valid protocol command. GPS chip is powered off. GPS sends no data or data format error. GPS chip is searching GPS info. GPS chip has gotten GPS info. Power on and normal. USB is connected for configuration. Power low alert Temperature is in the normal band. Temperature bands alarm event is triggered Temperature bands alarm function havent been activated. All successfully. Some messages are blocked for sending. Before getting the send result of the first message. USB is connected as a mass stroage. the messages are sent to server LED status Fast flashing Slow flashing ON Keep on for 3 seconds OFF Slow flashing Fast flashing ON ON Fast flashing Slow flashing Green light slow flashing Red light slow flashing OFF Green light slow flashing Red light slow flashing OFF ON 1Fastflashingisabout60msON/780msOFF 2Slowflashingisabout60msON/1940msOFF SPECIAL STATUS 1. GD100 received RTO command ACT from server: TEMP & DATA GREEN lights flash two times together and TEMP & DATA RED lights flash one time together in turn. 2. GD100 received ACT command, and user pressed START Button: All LEDs work TRACGD100UM001 9 GD100Usermanual normally, and temperature bands alarm monitoring start delay countdown starts. 3. GD100 is in activation state, and STOP Button has been pressed: PWR light will flash fast and TEMP & DATA GREEN will be long on. 4. GD100 enters STOP mode: PWR & GPS & CELL lights will be off, and TEMP & DATA GREEN lights will stay long on. If temperature bands alarm has been triggered, TEMP RED light stays flash slowly. Note:
1.InBatterymode(USBisnotconnected),allLEDsareonlyenabledatthefirst5minutesafter poweronthedevice,andthenwillbeshutdown.IfyouclickStart/StopButton,LEDswillwork another 5 minutes.2. TEMP lights status depends on Temperature Bands Alarm. When temperaturebandsalarmeventistriggered,TEMPRedlightwillflashslowlyandstayflashslowly, evenotherLEDsareoffbecause5minutesexpires. 2.4. UDISKBufferFile GD100 can save messages as buffer data, and the buffer data file will be stored on the mass storagedevice,whichisreadytobedownloaded.Andalso,thedatafilewillbeencryptedbyAES. ThekeyisthedeviceIMEI. TRACGD100UM001 10 GD100Usermanual 3 .GettingStarted 3.1. Partlist Name GD100Locater Picture Remark TheGSM/GPRS/GPSlocator. 3.2. Turnon/Turnoff Turnon:ShifttheToggleSwitchtoON,GD100willturnon. Turnoff:ShifttheToggleSwitchtoOFF,GD100willturnoff. TRACGD100UM001 11 GD100Usermanual 4 TroubleshootingandSafetyInfo 4.1. Troubleshooting Trouble After GD100 is turned on, the CELL LED always flashes quickly. Messages cant be reported to the backend server by GPRS. Unable to power off GD100. No response from configure port when configuring GD100 through USB GD100 cant get successful GPS fixing. Possible reason The SIM card is not inserted. The signal is too weak;
GD100 cant register to the network. The SIM card in GD100 doesnt support GPRS. APN is wrong. Some APNs cannot visit the Internet directly. The IP address or port of the backend server is wrong. Unable to power off GD100 if charger is connected. Driver of GD100 is not installed in computer. Switch of GD100 is OFF The GPS signal is weak. Solution Please insert the SIM card into GD100. Please move GD100 into places with good GSM coverage. Try a GPRS supporting SIM card. Ask the network operator for the right APN. Make sure the IP address for the backend server is an identified address on the Internet. Disconnect charger, and try again. Install the USB driver and try again Turn on the switch, and plug-in USB port again #1 Please move GD100 to a place with open sky. It is better to let the top surface face the sky. (The same surface with indication LED) note#1 :usb plug in to notebook ,this time ,battery is disabled,and USB Power is 5V ,small than 9V ,it can not work in transmission and receiving modes. only for configuration 4.2. SafetyInfo Pleasedonotdisassemblethedevicebyyourself. Please do not put the device on overheating or too humid place, and avoid exposure to direct sunlight. Too high temperature will damage the device or even cause battery TRACGD100UM001 12 GD100Usermanual explosion. PleasedonotuseGD100ontheairplaneornearmedicalequipment. To satisfy FCC RF Exposure requirements for this transmission devices, a separation distance of 20cm or more should be maintained between the antenna of this device and persons during operation. To ensure compliance, operation at closer than this distance is not recommended. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. TRACGD100UM001 13