| submitted | available | document details (if available) | source link |
|---|---|---|---|
| January 18 2019 | January 18 2019 |
| various | User Manual | Users Manual | 2.09 MiB | January 18 2019 |
GV300 User manual GV300CAN User Manual GPS Tracker TRACGV300CANUM001 Revision: R1.02 TRACGV3SUM001
- 1 -
GV300CAN User Manual Document Title GV300CAN User Manual Version Date Status R1.02 2018-01-22 Release Document Control ID TRACGV300CANUM001 General Notes Queclink offers this information as a service to its customers, to support application and engineering efforts that use the products designed by Queclink. The information provided is based upon requirements specifically provided to Queclink by the customers. Queclink has not undertaken any independent search for additional relevant information, including any information that may be in the customers possession. Furthermore, system validation of this product designed by Queclink within a larger electronic system remains the responsibility of the customer or the customers system integrator. All specifications supplied herein are subject to change. Copyright This document contains proprietary technical information which is the property Queclink Wireless Solutions Co., Ltd. The copying of this document, distribution to others, and communication of the contents thereof, are forbidden without express authority. Offenders are liable to the payment of damages. All rights are reserved in the event of a patent grant or registration of a utility model or design. All specifications supplied herein are subject to change without notice at any time. TRACGV300CANUM001
- 2 -
GV300CAN User Manual Contents 2. Contents ............................................................................................................................................ 3 Table Index ........................................................................................................................................ 4 Figure Index ....................................................................................................................................... 5 0. Revision History ......................................................................................................................... 6 Introduction .............................................................................................................................. 7 1. Reference .................................................................................................................. 7 1.1 1.2 Terms and Abbreviations ........................................................................................... 7 Product Overview ...................................................................................................................... 8 Check Parts List .......................................................................................................... 8 2.1. 2.2. Parts List .................................................................................................................... 9 Interface Definition ................................................................................................... 9 2.3. 2.4. GV300CAN User Cable Color ................................................................................... 10 3. Get Started .............................................................................................................................. 11 Open the Case ......................................................................................................... 11 Close the Case ......................................................................................................... 11 Install a SIM Card ..................................................................................................... 12 Install the Internal Backup Battery .......................................................................... 12 SYNC Switch ............................................................................................................. 13 Install the External GPS Antenna (Optional) ........................................................... 14 GPS Antenna Specification .............................................................................. 14 Power Connection ................................................................................................... 14 Ignition Detection .................................................................................................... 15 Digital Inputs ........................................................................................................... 16 Analog Inputs .......................................................................................................... 17 Digital Outputs ........................................................................................................ 17 Serial Port/UART Interface ...................................................................................... 19 1-Wire device Connection ....................................................................................... 19 Device Status LED .................................................................................................... 22 Bluetooth.................................................................................................... ............23 3.7. 3.8. 3.9. 3.10. 3.11. 3.12. 3.13. 3.14. 3.15. 3.1. 3.2. 3.3. 3.4. 3.5. 3.6. 3.6.1. TRACGV300CANUM001
- 3 -
GV300CAN User Manual Table Index TABLE 1. TABLE 2. TABLE 3. TABLE 4. TABLE 5. TABLE 6. TABLE 7. TABLE 8. TABLE 9. TABLE 10. GV300CAN PROTOCOL REFERENCE ................................................................................. 7 TERMS AND ABBREVIATIONS ........................................................................................... 7 PARTS LIST ........................................................................................................................ 9 DESCRIPTION OF 16 PIN CONNECTIONS ........................................................................ 10 GV300CAN USER CABLE COLOR DEFINITION ................................................................. 10 GPS ANTENNA SPECIFICATION ....................................................................................... 14 ELECTRICAL CHARACTERISTICS OF IGNITION DETECTION ............................................. 15 ELECTRICAL CHARACTERISTICS OF THE DIGITAL INPUTS ............................................... 16 ELECTRICAL CHARACTERISTICS OF DIGITAL OUTPUTS ................................................... 17 DEFINITION OF DEVICE STATUS AND LED ...................................................................... 22 TRACGV300CANUM001
- 4 -
GV300CAN User Manual Figure Index FIGURE 1. FIGURE 2. FIGURE 3. FIGURE 4. FIGURE 5. FIGURE 6. FIGURE 7. FIGURE 8. FIGURE 9. FIGURE 10. FIGURE 11. FIGURE 12. FIGURE 13. FIGURE 14. FIGURE 15. FIGURE 16. FIGURE 17. FIGURE 18. FIGURE 19. FIGURE 20. APPEARANCE OF GV300CAN ........................................................................................... 8 THE 16 PIN CONNECTOR ON THE GV300CAN .................................................................. 9 OPEN THE CASE ............................................................................................................. 11 CLOSE THE CASE ............................................................................................................ 11 SIM CARD INSTALLATION ............................................................................................... 12 BACKUP BATTERY INSTALLATION ................................................................................... 12 SYNC SWITCH ................................................................................................................. 13 GPS ANTENNA OF GV300CAN ....................................................................................... 14 TYPICAL POWER CONNECTION ...................................................................................... 15 TYPICAL IGNITION DETECTION ...................................................................................... 15 TYPICAL DIGITAL INPUT CONNECTION .......................................................................... 16 TYPICAL ANALOG INPUT CONNECTION ......................................................................... 17 DIGITAL OUTPUT INTERNAL DRIVE CIRCUIT .................................................................. 17 TYPICAL CONNECTION WITH RELAY .............................................................................. 18 TYPICAL CONNECTION WITH LED .................................................................................. 18 TYPICAL CONNECTION WITH RS232 PORT ..................................................................... 19 TYPICAL CONNECTION WITH 1-WIRE DEVICE ................................................................ 20 TYPICAL CONNECTION WITH IBUTTON READER ............................................................ 20 TYPICAL CONNECTION WITH TEMPERATURE SENSOR .................................................. 21 GV300CAN LED ON THE CASE ........................................................................................ 23 TRACGV300CANUM001
- 5 -
GV300CAN User Manual 0. Revision History Revision Date Author Description of change 1.00 1.01 1.02 2017-09-12 Super Zhao Initial 2017-12-19 Super Zhao Adjust the pictures and some description 2018-01-22 Pablo Dang Add the note for SYNC switch TRACGV300CANUM001
- 6 -
GV300 User Manual 1. Introduction The GV300CAN is a compact GPS tracker designed for a wide variety of vehicle tracking applications. It has multiple digital/analog I/O interfaces that can be used for monitoring or controlling external devices. At the same time, it has integrated CAN and J1708 which decodes information from vehicles digital buses (CANbus and J1708).It also includes a 1-wire interface used for driver ID and temperature monitoring. Its built-in GPS receiver has superior sensitivity and fast time to first fix. Its dual band GPRSsubsystem supports 850/1900 MHz allowing the GV300CAN's location to be monitored in real time or periodically tracked by a backend server and mobile devices. Its built-in 3-axis accelerometer allows motion detection and extends battery life through sophisticated power management algorithms. System integration is straightforward as complete documentation is provided for the full featured @Track protocol. The
@Track protocol supports a wide variety of reports including emergency, geo-fence boundary crossings, driving behavior, low battery and scheduled GPS position. 1.1 Reference SN Document name Remark Table 1. GV300CAN Protocol Reference
[1] GV300CAN @Track Air Interface Protocol The air protocol interface between GV300CAN and backend server. 1.2 Terms and Abbreviations Abbreviation Description Table 2. Terms and Abbreviations AIN DIN DOUT GND J1708_A J1708_B RXD TXD CAN_H CAN_L 1-wire Analog Input Digital Input Digital Output Ground J1708 BUS output A J1708 BUS output B Receive Data Transmit Data CAN BUS output high CAN BUS output LOW 1-wire BUS TRACGV300NUM001
- 7 -
GV300CAN User Manual 2. Product Overview 2.1. Check Parts List Before starting, check whether all the following items have been included with your GV300CAN. If anything is missing, please contact your supplier. Figure 1. Appearance of GV300CAN TRACGV300CANUM001
- 8 -
GV300CAN User Manual 2.2. Parts List Name GV300CAN Locator User Cable GPS Antenna (Optional) Table 3. Parts List Picture 80*49*26 mm MiniUSB_DATA_CABLE_1.5M (Optional) 2.3. Interface Definition The GV300CAN has a 16 PIN interface connector which contains the connections for power, I/O, RS232, CAN, J1708, 1-wire, etc. The sequence and definition of the 16PIN connector are shown in the following figure:
Figure 2. The 16 PIN Connector on the GV300CAN TRACGV300CANUM001
- 9 -
GV300CAN User Manual Table 4. Description of 16 PIN Connections Index Description Comment 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 CAN_H CAN_L CAN BUS output H CAN BUS output L IGN RXD TXD GND Ignition input, positive trigger UART RXD, RS232 UART TXD, RS232 Power and digital ground DATA_1W 1-Wire DATA OUT2 J1708_A J1708_B VIN IN2 IN1 Open drain, 150 mA max J1708 BUS output A J1708 BUS output B External DC power input, 8-32V Digital input, negative trigger Digital input, negative trigger OUT1 Open drain, 150 mA max ,with latch circuit VDD_1W 1-wire device power output ADC_IN ADC input 2.4. GV300CAN User Cable Color Table 5. GV300CAN User Cable Color Definition Definition Color PIN No Cable OUT2 Yellow DATA_1W Brown GND Black TXD White/Black RXD IGN Pink White CAN_L Gray/Black CAN_H Gray 8 7 6 5 4 3 2 1 15 14 13 PIN No Color Definition 16 Brown/White ADC_IN Green VDD_1W Blue OUT1 Orange 12 Orange/Black 11 Red IN1 IN2 VIN 10 Purple/White J1708_B 9 Purple J1708_A TRACGV300CANUM001
- 10 -
GV300CAN User Manual 3. Get Started 3.1. Open the Case Insert the triangular-pry-opener into the gap of the case as shown above, and push the opener up until the case is unsnapped. Figure 3. Open the Case 3.2. Close the Case Place the cover on the bottom in the position as shown in the figure above. Slide the cover against the direction of the arrow until it snaps. TRACGV300CANUM001
-
- 11 GV300CAN User Manual 3.3. Install a SIM Card Open the case and ensure the unit is not powered (unplug the 16Pin cable and switch the internal battery to the OFF position). Slide the holder right to open the SIM card holder. Insert the SIM card into the holder as shown below with the gold-colored contact area facing down. Take care to align the cut mark. Close the SIM card holder. Close the case. Figure 4. SIM Card Installation 3.4. Install the Internal Backup Battery GV300CAN has an internal backup Li-ion battery. Figure 5. Backup Battery Installation TRACGV300CANUM001
- 12 -
GV300CAN User Manual 3.5. SYNC Switch The switch was used to Synchronize the car model. You can push the switch to the left as the Arrow directionand hold it approximately 3 seconds to Synchronize the car model Figure 6. SYNC Switch Note:
If device is configured for any car, synchronization can be started in the following way:
1. Make sure the CAN function is enabled before you push the SYNC switch. 2. Connect the power for the device. The CAN LED lights red. 3. Press the button on the front panel of the device (you can hold it while connecting power supply). 4. After approximately 8 seconds, the CAN light will light green. Then release the button. After starting the device, sync CAN light blinks red. After several seconds (up to half a minute), synchronization is done and:
- if the green CAN light lights car has been synchronized successfully, turn the power supply off and on after 5 seconds - now the device is synchronized with the car.
- if the CAN light flashes alternating green / red - it means an invalid connection to the CAN-bus. Make sure the CAN-bus wires are not swapped (CAN-H against CANL), and the ignition is turned on. If these conditions are met the device is not connected to any CAN-bus.
- if the red CAN light - CAN bus connection is correct, but the car has not been recognized. The current version of the software will not work with this car model. CAN-bus synchronization may also be performed through the serial port. On request, the device may be delivered with the proper configuration for the selected car model. TRACGV300CANUM001
- 13 -
GV300CAN User Manual 3.6. Install the External GPS Antenna (Optional) There is a SMA GPS antenna connector on GV300CAN. The GV300CAN will automatically detect and use an external antenna when connected. Figure 7. GPS Antenna of GV300CAN 3.6.1. GPS Antenna Specification Table 6. GPS Antenna Specification GPS antenna Frequency Bandwidth Beam width Supply voltage Polarization Gain Impedance VSWR Noise figure Specification 1575.42 MHz
>5 MHz
>120 deg 2.7V-3.3V RHCP Passive: 0 dBi min Active: 15 dB 50
<2
<3 3.7. Power Connection VIN (PIN11)/GND (PIN6) is the power input pin. The input voltage range for this device is from 8V to 32V. The device is designed to be installed in vehicles that operate on 12V or 24V systems without the need for external transformers. TRACGV300CANUM001
- 14 -
GV300CAN User Manual Figure 8. Typical Power Connection 3.8. Ignition Detection Table 7. Electrical Characteristics of Ignition Detection Logical status Active Inactive Electrical characteristics 5.0V to 32V 0V to 3V or open TRACGV300CANUM001
- 15 -
Figure 9. Typical Ignition Detection GV300CAN User Manual IGN (Pin3) is used for ignition detection. It is strongly recommended to connect this pin to ignition key RUN position as shown above. An alternative to connecting to the ignition switch is to find a non-permanent power source that is only available when the vehicle is running, for example, the power source for the FM radio. IGN signal can be configured to start transmitting information to the backend server when ignition is on, and enter the power saving mode when ignition is off. 3.9. Digital Inputs There are two general purpose digital inputs on GV300CAN. They are all negative triggers. Table 8. Electrical Characteristics of the Digital Inputs Logical status Active Inactive Electrical characteristics 0V to 0.8V Open The following diagram shows the recommended connection of a digital input. Figure 10. Typical Digital Input Connection TRACGV300CANUM001
- 16 -
GV300CAN User Manual 3.10. Analog Inputs There are one analog input on GV300CAN, The analog input voltage range could be selectable, Including 0-12V and 0-30V, and the default range is from 0 to 30V. The following diagram shows the recommended connection. Figure 11. Typical Analog Input Connection 3.11. Digital Outputs There are two digital outputs on GV300CAN. All are of open drain type and the maximum drain current is 150 mA. Each output has the built-in over current PTC resettable fuse. Figure 12. Digital Output Internal Drive Circuit Table 9. Electrical Characteristics of Digital Outputs Logical status Electrical characteristics Enable Disable
<1.5V @150 mA Open drain TRACGV300CANUM001
- 17 -
GV300CAN User Manual Figure 13. Typical Connection with Relay Figure 14. Typical Connection with LED Note:
1. OUT1 will latch the output state during reset. 2. Many modern relays come with a flyback diode pre-installed internal to the relay itself. If the relay has this diode, ensure the relay polarity is properly connected. If this diode is not internal, it should be added externally. A common diode such as a 1N4004 will work in most circumstances. TRACGV300CANUM001
- 18 -
GV300CAN User Manual 3.12. Serial Port/UART Interface There are two lines dedicated to the Serial Port/UART interface (TXD and RXD). TXD/RXD is standard RS232 signal. Figure 15. Typical Connection with RS232 Port 3.13. 1-Wire device Connection It has 1-wire bus on GV300CAN, which supports temperature sensors and iButton. The bus includes 3 signals, namely, VDD-1W, DATA-1W and GND. VDD-1W is the power output for 1-wire device, and DATA-1W is the data signal, with which GV300CAN can get information from 1-wire device. The following diagrams show the recommended connection of 1-wire device. TRACGV300CANUM001
- 19 -
GV300CAN User Manual Figure 16. Typical Connection with 1-wire Device Figure 17. Typical Connection with iButton Reader TRACGV300CANUM001
- 20 -
GV300CAN User Manual Figure 18. Typical Connection with Temperature Sensor TRACGV300CANUM001
- 21 -
GV300CAN User Manual 3.14. Device Status LED Table 10. Definition of Device Status and LED LED GSM
(Note 1) GPS
(Note 2) Device status Device is searching GSM network. Device has registered to GSM network. SIM card needs pin code to unlock. GPS chip is powered off. LED status Fast flashing
(Note 3) Slow flashing
(Note 4) ON OFF GPS sends no data or data format error occurs. Slow flashing GPS chip is searching GPS info. GPS chip has gotten GPS info. CAN Start the synchronization procedure. Synchronization is complete and successfully. Synchronization is complete. CAN-bus connected properly, but the car is not recognized. Fast flashing ON Blinking red Lights green Lights red Invalid connection to the CAN-bus. Flashes green/red CAN-Logistic connected successfully to vehicles bus(es). (Note 5) Interval one second, Green LED blinks once CAN-bus does not read CAN-bus data. (Note 5) CAN-Logistic connected successfully to vehicles bus(es). (Note 6) Interval 4 seconds, Green LED blinks once Interval one second, Green LED double blink CAN-Logistic reads only one bus(CAN or J1708)
(Note 6) Interval one second, Green LED blinks once CAN-Logistic reads none bus(neither CAN nor J1708)
(Note 6) Interval 4 seconds, Green LED blinks once TRACGV300CANUM001
- 22 -
GV300CAN User Manual Figure 19. GV300CAN LED on the Case Note:
1. GSM LED cannot be configured. 2. GPS LED and PWR LED can be configured to turn off after a period of time by using the configuration tool. 3. Fast flashing: for GSM LED is about 60 ms ON/780 ms OFF; for GPS LED and PWR LED is about 100 ms ON/100 ms OFF. 4. Slow flashing: for GSM LED is about 60 ms ON/1940 ms OFF; for GPS LED and PWR LED is about 600 ms ON/600 ms OFF. 5. When only CAN-bus is connected. 6. When both buses (CAN i J1708) are connected. 3.15. Bluetooth The device role of Bluetooth could be Master and Slave. When the device role is Slave, the device will provide below services: device information service, battery information service, virtual serial port service. Other devices can read or use these services after connecting devices. When the device role is Master, the device will provide below services: the others devices can read or use the above services after connecting devices, connect the designated device to read the data or related information of the designated Bluetooth devices. After reading the data, the server can be reported to the server by the corresponding message. TRACGV300CANUM001
- 23 -
GV300CAN User Manual 3.15.1. Bluetooth usage Install Lightblue APP on your smartphone for IOS, and install NRF Connect for Android. Send command:
AT+GTBTS=gv300can,1,,GV300CAN_BT,7,3,666,1D07,0003,0,123456,,,,,,,,,,,,FFFF$
by Manage Tool to device to turn on Bluetooth. The device will connect to smartphone. Send AT+GTBTS=gv300can,0,,GV300CAN_BT,7,3,666,1D07,0003,0,123456,,,,,,,,,,,,FFFF$
by Manage Tool to device to turn off Bluetooth. The device will disconnect to smartphone. command FCC Statement Any Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment .This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. TRACGV300CANUM001
- 24 -
This product uses the FCC Data API but is not endorsed or certified by the FCC