FCC ID: 2A8QHMEVA0088 Radio V_Meter with bluetooth function

Operation Instructions MEVA0088 Radio V_Meter To ensure proper operation, please read this owners manual carefully before using the product. After reading this manual, be sure to keep it for future reference. WARNING: Built-in component, suitable enclosure and type of supply connection should be provided by the final system. When installing this equipment, all requirements of the standards IEC/EN 62368-1 must be fulfilled.

1 2 3 Wireless Technical Indicators Project Index Specification Version Specification of the Bluetooth System (BR+EDR) Frequency Range 2402 MHz 2480 MHz Modulation GFSK, /4-DQPSK, 8DPSK Supported Capacity 40 Channels: Channel N=2402+N*2

(Number of Supported Channels)

(N=0.1.2.339) RF Output Power Antenna Gain Antenna Type Application Environment

< -0.94 dbm

-0.58dBi Max. Integrated Antenna Project Index Operation Temperature Range 0 40 Voltage 12V/24VDC Software Version Hardware Version Technical Specifications V1.0 V1.0 Bluetooth Range Up to 10 Meters (Free Space) FM Frequency Range 87.5 ~ 108 MHz Supported Audio Format MP3 files Dimensions Weight 92 x 41 x 20 mm 30 grams Overview and Control Specification 1 4 5 6 2 3 7 8 1 Display Screen - Indicate the working status in different modes. Notes: The volume meter bars at the both sides of display screen will be flashing along with the play under different modes and will go out when the speaker is in standby mode or pausing. 2 USB Port - Insert U disk to play music or other audio sources.

(Supported audio format: MP3 files) 3 SD Card Slot - When a TF (MicroSD) card is inserted in place, music or other audio sources on the card will be automatically played.

(Supported audio format: MP3 files) 4 AUX Input - When you connect an audio cable (not supplied) via the AUX input, the speaker plays the audio signal from the connected device. In this case, the control operation is carried out exclusively through the connected device and not via the speaker. ATTN: Without the audio connection with TF (MicroSD) Card/USB/AUX, the system mode automatically switches to FM radio mode and the speaker continues to play the station that previously stayed on. 5

-VOL/OFF - Decrease the volume level (Control Range: 30 ~ 10). Press to pause/OFF the play when the volume is at level 10.

[Short Press]: Reduce the volume level one by one. 1 2 3 Control Specification

[Long Press]: The volume will be down until releasing the button or to the lowest level. 6 ON/VOL+ - Increase the volume level (Control Range: 10 ~ 30). Press to resume/ON the play if the speaker is pausing.

[Short Press]: Increase the volume level one by one.

[Long Press]: The volume will be up until releasing the button or to the highest level. MODE SELECTION : FM Radio and Bluetooth Connection. When the speaker is powered ON, the default mode is FM Radio. It will automatically boardcast the first station starting from 87.5 MHz or the radio station that previously stayed on.

[Step 1]: Press button & together and hold them for 2 seconds 6 5 to switch to Bluetooth mode and it will come out a sound signal as well as blinking characters display on the screen for notification.

[Step 2]: On your smart phone or other Bluetooth devices, enable Bluetooth function and search for nearby Bluetooth device to pair with. Select JQ-BT from the list of available devices on the screen of your Bluetooth device. It may take a moment before your device detects the speaker and is available in the list. When successfully paired, a short prompt will be heard and the characters on the screen will change from blinking to always on.

[Step 3]: Music or audio streams from the connected device will now be played through the speaker. ATTN:

Make sure the devices are within Bluetooth range (within 10 Meters). The speaker can remember multiple Bluetooth devices and will always try to reconnect to the last device it was paired with. To reconnect to a different device, turn off Bluetooth on unwanted devices, then access the Bluetooth Settings on the device you wish to use and select JQ-BT to reconnect to the speaker. Multiple Bluetooth devices cannot be played back at the same time. 1 2 3 Control Specification & FCC Statement 7 - Decrease the FM frequency or Skip to previous track/song.

[Short Press]: Tune the frequency down by each 0.1 MHz under FM radio mode. Skip to previous song when the speaker is in the audio connection with TF (MicroSD) Card/USB/Bluetooth.

[Long Press]: Automatic search previous radio station with strong receiption. 8 - Increase the FM frequency or Skip to next track/song.

[Short Press]: Tune the frequency up by each 0.1 MHz under FM radio mode. Skip to next song when the speaker is in the audio connection with TF (MicroSD) Card/USB/Bluetooth.

[Long Press]: Automatic search next radio station with strong receiption. FCC STATEMENT This device complies with Part 15 of the FCC Rules. Caution: If any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television 1 2 3 1 2 3 FCC & ISED Statement reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. ISED STATEMENT This device complies with Innovation, Science and Economic Development Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. CAN ICES-3(B)/NMB-3(B) Le prsent appareil est conforme aux CNR Innovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes:

(1) il ne doit pas produire de brouillage et (2) Iutilisateur du dispositif doit tre prt accepter tout brouillage radiolectrique reu, mme si ce brouillage est susceptible de compromettre le fomctionnement du dispositif. CAN ICES-3(B)/NMB-3(B) 4

RAIDER COLLECTIONS COMPANY LIMITED Address: Room 1003, 10/F, Tower 1, Lippo Centre, 89 Queensway, Admiralty, Hong Kong Tel: 852-3588 8733 Fax: 852-3588 8717 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 02-13-2023 Ref: Attestation Statements Part 2.911(d){7) Filing FCC ID: 2ABQHMEVA0088

[Raider Collections Company Limited] (the applicant) certifies that, as of the date of the filing of the application, (Peg Perego U.S.A. Inc) is our designated U.S. agent for service of process for the above referenced FCC ID. [Raider Collections Company Limited] accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-

related proceeding involving the equipment.

(Peg Perego U.S.A. Inc) accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information:

FRN: 0012029575 . Name: Peg Perego U.S.A. Inc Address: 3625 Independence Drive, Fort Wayne, IN 46808, United States Contact Person: Nicolas Perego Tel.: 260-482-8191 Email: nicolas.perego@pegperego.com Sincerely,

[Insert U.S. agent company name] Peg Perego U.S.A. Inc

(U.S. agent company name printed name) Nicolas Perego

(U.S. agent company name signature)

[Insert applicant name]

Raider Callections Company Limited

(Applicant printed name) Robert Tau

{Applicant signature) oo

COMPANY LETTERHEAD Date (13/02/2023) TUV SUD BABT TCB Octagon House, Segensworth Road, Fareham, Hampshire, PO15 5RL Confidentiality Request FCC ID: 2A8QHMEVA0088 Pursuant to Sections 0.457(d)(1)(ii) and 0.459 of the Commissions Rules, Raider Collections Co., Limited hereby requests permanent confidential treatment of information accompanying this application as outlined below:

Schematics Bill of Materials/Parts List Block Diagrams Theory of Operation]

Raider Collections Co., Limited also hereby requests short-term confidential treatment of information accompanying this application as outlined below for a period of (up to 180) days:

Internal Photos External Photos User Manual Test Set-up Photographs The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this Application and all accompanying materials will not be made before the date of the Grant for this Application. Yours sincerely, Company Officer:

Robert Tau Telephone Number:

852-3588 8733 Email:

roberttau@raider-collections.com

Raider Collections Company Limited Date: 02-13-2023 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Ref: Attestation Statements Part 2.911(d)(5)(i) and Part 2.911(d)(5)(ii) Filing FCC ID: 2A8QHMEVA0088 Dear Sir or Madam,

[Raider Collections Company Limited] certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, the applicant [is / is not] identified on the Covered List as an entity producing covered equipment. If you have any questions, please contact us. Sincerely, Contact name: Robert Tau Company name: Raider Collections Co., Limited Address: Room 1003, 10/F, Tower1, Lippo Centre, 89 Queensway, Admiralty, HONG KONG E-mail: roberttau@raider-collections.com Tel: 852-3588 8733