RZ150118 Wireless SmartBand User Manual

PACKAGE CONTENTS Razer Nabu Important Product Information Guide Micro-USB Charging Cable SYSTEM REQUIREMENTS iPhone 5 / 5S /5C with iOS 7 (or higher) Android 4.1 (or higher) with Bluetooth 4.0 REGISTRATION Sign up now for a Synapse account to get real-time information on your products warranty status. To learn more about Synapse and all its features, visit www.razerzone.com/synapse. If you are already a Synapse user, register your product by clicking on your email address at the Synapse application and select Warranty Status from the dropdown list. To register your product online, visit www.razerzone.com/registration. Please note that you will not be able to view your warranty status if you register via the website. TECHNICAL SUPPORT What youll get:

1 year limited manufacturers warranty. Free online technical support at www.razersupport.com. CHARGING THE NABU 1. Unlock the clasp by separating the two ends of the wristband. 2. Plug in the Nabu to the micro USB cable. 3. Plug the USB cable to your PC or to a USB charger. Reminder: Please remove the Nabu from your wrist before charging it. The approximate time to fully charge the Nabu is 90 minutes. CHANGING THE CLASP 1. Twist the clasp 90 degrees and then pull it from the wristband. 2. Insert the small clasp into the wristband then twist it 90 degrees. USING THE RAZER NABU 1. Insert your wrist into the wristband from the side as shown here. 2. Lock the clasp and make sure both ends of the wristband are aligned. 3. Press the power button for at least 2 seconds. 4. Download the Razer Nabu Utility App for iOS or Android and follow the onscreen instructions. For more information, please refer to the Online Master Guide at www.razersupport.com. SAFETY GUIDELINES In order to achieve maximum safety while using your Razer Nabu, we suggest that you adopt the following guidelines:

1. Should you have trouble operating the device properly and troubleshooting does not work, unplug the device and contact the Razer hotline or go to www.razersupport.com for support. Do not attempt to service or fix the device yourself at any time. 2. Do not take apart the device (doing so will void your warranty) and do not attempt to operate it under abnormal current loads. 3. Do not expose the Razer Nabu to liquids, moisture, or humidity while charging. Exposing the Razer Nabu to these conditions may result in electric shock. crushing, excessive bending, puncturing, 4. Do not tamper or abuse the Razer Nabu; including but not limited to dropping, shredding, microwaving, incinerating, or inserting foreign objects into the Razer Nabu. 5. Do not use abrasive cleaners and/or harsh cleaning agents to clean the Razer Nabu. 6. Do not expose the Razer Nabu to extremely high or low temperatures such as leaving the Razer Nabu in direct sunlight or in snowy weather for extended periods of time. 7. Do not expose the Razer Nabu to open flames such as stoves, candles, or fireplaces. 8. Charge the battery in accordance with the recommended charging time and do not wear the Razer Nabu while it is charging. 9. Dispose the product according to your local environmental laws and guidelines. BATTERY The Razer Nabu contains an internal, lithium-ion polymer rechargeable battery. In general, the life expectancy of this battery depends upon use. If the battery does not charge after several attempts, it may be non-operational and you may need to contact customer support. Do not attempt to replace the Razer Nabus battery yourself. COPYRIGHT AND INTELLECTUAL PROPERTY INFORMATION 2014 Razer Inc. All rights reserved. Razer, For Gamers By Gamers, and the triple-headed snake logo are trademarks or registered trademarks of Razer Inc. and/or affiliated companies in the United States or other countries. All other trademarks are the property of their respective owners. Actual product may differ from pictures. Information is correct at time of printing. iOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license. Android is a trademark of Google Inc. Razer Inc. (Razer) may have copyright, trademarks, trade secrets, patents, patent applications, or other intellectual property rights (whether registered or unregistered) concerning the product in this guide. Furnishing of this guide does not give you a license to any such copyright, trademark, patent or other intellectual property right. The Razer Nabu (the Product) may differ from pictures whether on packaging or otherwise. Razer assumes no responsibility for such differences or for any errors that may appear. Information contained herein is subject to change without notice. LIMITED PRODUCT WARRANTY For the latest and current terms of the Limited Product Warranty, please visit www.razerzone.com/warranty. LIMITATION OF LIABILITY Razer shall in no event be liable for any lost profits, loss of information or data, special, incidental, indirect, punitive or consequential or incidental damages, arising in any way out of distribution of, sale of, resale of, use of, or inability to use the Product. In no event shall Razers liability exceed the retail purchase price of the Product. COSTS OF PROCUREMENT For the avoidance of doubt, in no event will Razer be liable for any costs of procurement unless it has been advised of the possibility of such damages, and in no case shall Razer be liable for any costs of procurement liability exceeding the retail purchase price of the Product. GENERAL These terms shall be governed by and construed under the laws of the jurisdiction in which the Product was purchased. If any term herein is held to be invalid or unenforceable, then such term (in so far as it is invalid or unenforceable) shall be given no effect and deemed to be excluded without invalidating any of the remaining terms. Razer reserves the right to amend any term at any time without notice. FCC DECLARATION OF CONFORMANCE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio TV technician for help. For more information, refer to the online help system on www.razerzone.com. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation. CAUTION: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this device. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be operated in conjunction with any other antenna. Industry Canada Compliance Statement This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. This device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions:

1) this device may not cause interference, and 2) this device must accept any interference, including interference that may cause undesired operation of the device. Cet quipement a t dclar conforme la norme CNR-210 dicte par Industrie Canada. Son fonctionnement est soumis aux conditions suivantes:

1) l'quipement concern ne doit pas causer d'interfrences, et 2) il doit accepter toute interference reue, y compris les interfrences risquant d'engendrer un fonctionnement indsirable.