FCC ID: TX2-RTL8822BE 802.11a/b/g/n/ac RTL8822BE Combo module

by: Realtek Semiconductor Corp. latest update: 2019-05-07 model: RTL8822BE

One Hundred And Fifty Six grants have been issued under this FCC ID from 08/29/2016 to 05/07/2019 (this is one of one hundred and forty-six releases in 2019 for this grantee). Public details available include frequency information, manuals, and internal & external photos. some products also feature user submitted or linked warrantee terms, troubleshooting guides, drivers, password defaults, & instructions.
permalink for this FCC identifier
search for: Repair details
from iFixIt
Replacement
on Amazon
Trade-in? Recycling locations
eg is reader-supported. when you buy through links on our site, we may earn an affiliate commission.
|
|
|   
eg for Slack usage
app s submitted / available
various Host User Manual Users Manual pdf 5.92 MiB
various Host User Manual Regulatory Users Manual pdf 1.71 MiB
various Host User Manual TPN-W139 Users Manual pdf 2.66 MiB
various Users Manual pdf April 15 2019 / October 13 2019
various Users Manual pdf April 15 2019 / October 13 2019
various Users Manual pdf April 15 2019 / October 13 2019
various User Manual Users Manual pdf 3.78 MiB March 02 2019 / March 08 2019
various User Manual (TPN-W143) Users Manual pdf 4.32 MiB
various Users Manual pdf March 21 2019 / September 18 2019
various Users Manual pdf March 22 2019 / September 21 2019
various User Manual-1 Users Manual pdf 1.94 MiB February 02 2019 / February 08 2019
various User Manual-2 Users Manual pdf 1.77 MiB February 02 2019 / February 08 2019
various User Manual-Statement Users Manual pdf 3.64 MiB March 02 2019 / March 08 2019
various Users Manual-1 Users Manual pdf 1.10 MiB November 02 2019 / November 08 2019
various Users Manual-2 Users Manual pdf 2.58 MiB November 02 2019 / November 08 2019
various Host Internal Photos (TPN-W143) Internal Photos pdf 2.96 MiB
various Internal Photos Internal Photos pdf 3.95 MiB November 02 2019 / November 08 2019
various Internal Photos (TPN-W139, RTL8822BE) Internal Photos pdf 2.14 MiB
various Internal Photos pdf March 22 2019 / September 21 2019
various Internal Photos pdf March 22 2019 / September 21 2019
various Internal Photos pdf March 22 2019 / September 21 2019
various Internal Photos pdf March 22 2019 / September 21 2019
various Internal Photos pdf March 21 2019 / September 18 2019
various Internal Photos pdf March 21 2019 / September 18 2019
various Internal Photos pdf March 21 2019 / September 18 2019
various Internal Photos pdf March 21 2019 / September 18 2019
various External Photos External Photos pdf 2.33 MiB November 02 2019 / November 08 2019
various External Photos (TPN-W139, RTL8822BE) External Photos pdf 3.61 MiB
various Host External Photos (TPN-W143) External Photos pdf 2.21 MiB
various (, TPN-W139) Host Label Info ID Label/Location Info pdf 45.99 KiB
various Host Label Info ID Label/Location Info pdf 101.77 KiB
various Host Label Info (RTL8822BE, TPN-W143) ID Label/Location Info pdf 45.30 KiB / January 02 2019
various Host Label Info HSN-I30C ID Label/Location Info pdf 101.71 KiB
various ID Label/Location Info ID Label/Location Info pdf 722.51 KiB / July 05 2019
various Label and location ID Label/Location Info pdf 177.07 KiB March 02 2019 / May 02 2019
various Authorization Letter Cover Letter(s) pdf 79.08 KiB / July 05 2019
various Class II permissive change format letter Cover Letter(s) pdf 113.56 KiB / July 05 2019
various FCC Power Inconsistency Declaration Letter Cover Letter(s) pdf 154.82 KiB / July 05 2019
various Operation Description for 12. SOFTWARE SECURITY REQUIREMENTS FOR U-NII DEVICES Operational Description pdf April 30 2019 confidential
various RF Exposure Info pdf / July 05 2019
various RF Exposure Info pdf / July 05 2019
various RF Exposure Info pdf / July 05 2019
various RF Exposure Info pdf / July 05 2019
various Test Setup Photos pdf April 30 2019 / October 28 2019
various confidentiality Cover Letter(s) pdf 137.91 KiB / July 05 2019
various Wi-Fi Channel 12 and 13 Declaration Letter Cover Letter(s) pdf 106.61 KiB / June 05 2019
various RF Exposure Info pdf
various RF Exposure Info pdf
various Class II permissive change letter Cover Letter(s) pdf 197.07 KiB
various Operational Description Operational Description pdf April 15 2019 confidential
various Response to Inquiry to FCC Tracking Number 488193 Cover Letter(s) pdf 111.45 KiB
various RF Exposure Info pdf
various agent auth letter Cover Letter(s) pdf 104.17 KiB
various RF Exposure Info pdf
various RF Exposure Info pdf
various Confidentiality Request Letter Cover Letter(s) pdf 216.75 KiB
various Operational Description Report AWAN Operational Description pdf March 22 2019 confidential
various Operational Description Report HongBo Operational Description pdf March 22 2019 confidential
various Operational Description Report WNC Operational Description pdf March 22 2019 confidential
various Power of Attorney Letter Cover Letter(s) pdf 201.21 KiB
various RF Exposure Info pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various Test Setup Photos pdf
various Tune Up Procedure Parts List/Tune Up Info pdf March 22 2019 confidential
various Antenna Report AWAN (HSN-I30C) Operational Description Operational Description pdf March 21 2019 confidential
various Antenna Report HONGBO (HSN-I30C) Operational Description Operational Description pdf March 21 2019 confidential
various Antenna Report WNC (HSN-I30C) Operational Description Operational Description pdf March 21 2019 confidential
various C2PC Cover Letter (HSN-I30C) Cover Letter(s) pdf 200.06 KiB
various Confidential Request Letter Cover Letter(s) pdf 216.74 KiB
various Tune-up Procedure (HSN-I30C) Parts List/Tune Up Info pdf March 21 2019 confidential
various Cover Letter(s) pdf March 21 2019 / March 22 2019
various 10. FCC Power Inconsistency Declaration Letter Cover Letter(s) pdf 102.67 KiB November 02 2019 / December 02 2019
various RF Exposure Info pdf November 02 2019 / December 02 2019
various RF Exposure Info pdf November 02 2019 / December 02 2019
various RF Exposure Info pdf November 02 2019 / December 02 2019
various Test Setup Photos pdf November 02 2019 / November 08 2019
various Class II Permissive Change Request Letter Cover Letter(s) pdf 167.29 KiB March 02 2019 / May 02 2019
various RSE Justification Letter Cover Letter(s) pdf 181.39 KiB March 02 2019 / May 02 2019
various RF Exposure Info pdf March 02 2019 / May 02 2019
various RF Exposure Info pdf March 02 2019 / May 02 2019
various Test Setup Photos pdf March 02 2019 / March 08 2019
various STC Letter Cover Letter(s) pdf 109.69 KiB March 02 2019 / May 02 2019
various Antenna NB Mode (TPN-W143) Operational Description Operational Description pdf January 30 2019 confidential
various Antenna Tablet Mode (TPN-W143) Operational Description Operational Description pdf January 30 2019 confidential
various Class II Permissive Change Letter (TPN-W143) Cover Letter(s) pdf 199.48 KiB / January 02 2019
various Tune Up Procedure (TPN-W143) Parts List/Tune Up Info pdf January 30 2019 confidential
various Op Desc Antenna NB Mode TPN-W141 Operational Description pdf January 29 2019 confidential
various Op Desc Antenna Tablet Mode TPN-W141 Operational Description pdf January 29 2019 confidential
various Tune Up TPN-W141 Parts List/Tune Up Info pdf January 29 2019 confidential
various Op Desc Antenna NB Mode TPN-W139 FF Operational Description pdf January 22 2019 confidential
various Op Desc Antenna NB Mode TPN-W139 FF plus Operational Description pdf January 22 2019 confidential
various Op Desc Antenna Tablet Mode TPN-W139 FF Operational Description pdf January 22 2019 confidential
various Op Desc Antenna Tablet Mode TPN-W139 FF plus Operational Description pdf January 22 2019 confidential
various Tune Up Procedure NB Mode TPN-W139 Parts List/Tune Up Info pdf January 22 2019 confidential
various Tune Up Procedure NB Tablet TPN-W139 Parts List/Tune Up Info pdf January 22 2019 confidential
various Class II Permissive Change Letter TPN-W139 Cover Letter(s) pdf 200.12 KiB
various Confidentiality Letter Cover Letter(s) pdf 216.41 KiB
various RF Exposure Info pdf
various Test Setup Photos pdf
various Host User Manual Users Manual pdf 5.92 MiB
various Host User Manual Regulatory Users Manual pdf 1.71 MiB
various Host User Manual TPN-W139 Users Manual pdf 2.66 MiB
various User Manual Users Manual pdf 3.78 MiB March 02 2019 / March 08 2019
various User Manual (TPN-W143) Users Manual pdf 4.32 MiB
various User Manual-1 Users Manual pdf 1.94 MiB February 02 2019 / February 08 2019
various User Manual-2 Users Manual pdf 1.77 MiB February 02 2019 / February 08 2019
various User Manual-Statement Users Manual pdf 3.64 MiB March 02 2019 / March 08 2019
various Users Manual-1 Users Manual pdf 1.10 MiB November 02 2019 / November 08 2019
various Users Manual-2 Users Manual pdf 2.58 MiB November 02 2019 / November 08 2019
various Host Internal Photos (TPN-W143) Internal Photos pdf 2.96 MiB
various Internal Photos Internal Photos pdf 3.95 MiB November 02 2019 / November 08 2019
various Internal Photos (TPN-W139, RTL8822BE) Internal Photos pdf 2.14 MiB
various External Photos External Photos pdf 2.33 MiB November 02 2019 / November 08 2019
various External Photos (TPN-W139, RTL8822BE) External Photos pdf 3.61 MiB
various Host External Photos (TPN-W143) External Photos pdf 2.21 MiB
various (, TPN-W139) Host Label Info ID Label/Location Info pdf 45.99 KiB
various Host Label Info ID Label/Location Info pdf 101.77 KiB
various Host Label Info (RTL8822BE, TPN-W143) ID Label/Location Info pdf 45.30 KiB / January 02 2019
various Host Label Info HSN-I30C ID Label/Location Info pdf 101.71 KiB
various ID Label/Location Info ID Label/Location Info pdf 722.51 KiB / July 05 2019
various Label and location ID Label/Location Info pdf 177.07 KiB March 02 2019 / May 02 2019
various Authorization Letter Cover Letter(s) pdf 79.08 KiB / July 05 2019
various Class II permissive change format letter Cover Letter(s) pdf 113.56 KiB / July 05 2019
various FCC Power Inconsistency Declaration Letter Cover Letter(s) pdf 154.82 KiB / July 05 2019
various confidentiality Cover Letter(s) pdf 137.91 KiB / July 05 2019
various Wi-Fi Channel 12 and 13 Declaration Letter Cover Letter(s) pdf 106.61 KiB / June 05 2019
various Class II permissive change letter Cover Letter(s) pdf 197.07 KiB
various Response to Inquiry to FCC Tracking Number 488193 Cover Letter(s) pdf 111.45 KiB
various agent auth letter Cover Letter(s) pdf 104.17 KiB
various Confidentiality Request Letter Cover Letter(s) pdf 216.75 KiB
various Power of Attorney Letter Cover Letter(s) pdf 201.21 KiB
various C2PC Cover Letter (HSN-I30C) Cover Letter(s) pdf 200.06 KiB
various Confidential Request Letter Cover Letter(s) pdf 216.74 KiB
various 10. FCC Power Inconsistency Declaration Letter Cover Letter(s) pdf 102.67 KiB November 02 2019 / December 02 2019
various Class II Permissive Change Request Letter Cover Letter(s) pdf 167.29 KiB March 02 2019 / May 02 2019
various RSE Justification Letter Cover Letter(s) pdf 181.39 KiB March 02 2019 / May 02 2019
various STC Letter Cover Letter(s) pdf 109.69 KiB March 02 2019 / May 02 2019
various Class II Permissive Change Letter (TPN-W143) Cover Letter(s) pdf 199.48 KiB / January 02 2019
various Class II Permissive Change Letter TPN-W139 Cover Letter(s) pdf 200.12 KiB
various Confidentiality Letter Cover Letter(s) pdf 216.41 KiB

frequency equipment class purpose
1 2019-05-07 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX Class II Permissive Change
2 2019-05-06 2412 ~ 2472 DTS - Digital Transmission System
3 2019-05-05 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
4 2019-04-26 2412 ~ 2472 DTS - Digital Transmission System
5 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
6 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
7 2019-03-25 2412 ~ 2472 DTS - Digital Transmission System
8 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
9 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
10 2019-03-22 2412 ~ 2472 DTS - Digital Transmission System
11 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
12 5180 ~ 5240 NII - Unlicensed National Information Infrastructure TX
13 2019-02-12 5500 ~ 5720 NII - Unlicensed National Information Infrastructure TX
14 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
15 2412 ~ 2472 DTS - Digital Transmission System
16 2019-02-05 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
17 2402 ~ 2480 DTS - Digital Transmission System
18 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
19 2019-02-02 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
20 2412 ~ 2472 DTS - Digital Transmission System
21 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
22 2019-02-01 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
23 2402 ~ 2480 DTS - Digital Transmission System
24 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
25 2019-01-30 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
26 5500 ~ 5720 NII - Unlicensed National Information Infrastructure TX
27 2402 ~ 2480 DTS - Digital Transmission System
28 2019-01-23 5500 ~ 5720 NII - Unlicensed National Information Infrastructure TX
29 2412 ~ 2472 DTS - Digital Transmission System
30 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
31 2019-01-22 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
32 2412 ~ 2472 DTS - Digital Transmission System
33 5260 ~ 5320 NII - Unlicensed National Information Infrastructure TX
34 2019-01-20 2412 ~ 2472 DTS - Digital Transmission System
35 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
36 5500 ~ 5720 NII - Unlicensed National Information Infrastructure TX
37 2019-01-19 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
38 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
39 2412 ~ 2472 DTS - Digital Transmission System
40 2019-01-03 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
41 2402 ~ 2480 DTS - Digital Transmission System
42 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
43 2018-12-31 2412 ~ 2472 DTS - Digital Transmission System
44 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
45 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
46 2018-11-27 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
47 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
48 2412 ~ 2472 DTS - Digital Transmission System
49 2018-10-09 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
50 2412 ~ 2472 DTS - Digital Transmission System
51 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
52 2018-10-08 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
53 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
54 2412 ~ 2472 DTS - Digital Transmission System
55 2018-10-05 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
56 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
57 2412 ~ 2472 DTS - Digital Transmission System
58 2018-09-21 2412 ~ 2472 DTS - Digital Transmission System
59 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
60 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
61 2018-09-12 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
62 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
63 2412 ~ 2472 DTS - Digital Transmission System
64 2018-07-04 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
65 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
66 2412 ~ 2472 DTS - Digital Transmission System
67 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
68 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
69 2412 ~ 2472 DTS - Digital Transmission System
70 2018-07-03 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
71 2412 ~ 2472 DTS - Digital Transmission System
72 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
73 2018-07-02 2412 ~ 2472 DTS - Digital Transmission System
74 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
75 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
76 2018-05-02 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
77 2412 ~ 2472 DTS - Digital Transmission System
78 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
79 2018-04-24 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
80 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
81 2412 ~ 2472 DTS - Digital Transmission System
82 2018-03-30 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
83 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
84 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
85 2412 ~ 2472 DTS - Digital Transmission System
86 2412 ~ 2472 DTS - Digital Transmission System
87 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
88 2018-03-29 2412 ~ 2472 DTS - Digital Transmission System
89 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
90 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
91 2018-03-27 2412 ~ 2472 DTS - Digital Transmission System
92 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
93 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
94 2018-03-21 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
95 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
96 2412 ~ 2472 DTS - Digital Transmission System
97 2018-02-28 2412 ~ 2472 DTS - Digital Transmission System
98 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
99 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
100 2018-02-27 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
101 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
102 2412 ~ 2472 DTS - Digital Transmission System
103 2018-02-06 2412 ~ 2472 DTS - Digital Transmission System
104 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
105 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
106 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
107 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
108 2412 ~ 2472 DTS - Digital Transmission System
109 2018-01-11 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
110 5180 ~ 5240 NII - Unlicensed National Information Infrastructure TX
111 2412 ~ 2472 DTS - Digital Transmission System
112 2017-12-21 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
113 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
114 2412 ~ 2472 DTS - Digital Transmission System
115 2017-12-20 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
116 2412 ~ 2472 DTS - Digital Transmission System
117 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
118 2017-12-19 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
119 2412 ~ 2472 DTS - Digital Transmission System
120 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
121 2017-11-29 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
122 2412 ~ 2472 DTS - Digital Transmission System
123 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
124 2017-11-28 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
125 2412 ~ 2472 DTS - Digital Transmission System
126 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
127 2412 ~ 2472 DTS - Digital Transmission System
128 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
129 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
130 2017-11-13 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
131 2412 ~ 2472 DTS - Digital Transmission System
132 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
133 2017-10-30 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
134 2412 ~ 2472 DTS - Digital Transmission System
135 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
136 2017-09-21 2412 ~ 2472 DTS - Digital Transmission System
137 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
138 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
139 2017-07-11 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
140 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
141 2412 ~ 2472 DTS - Digital Transmission System
142 2017-03-02 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter Class II permissive change or modification of presently authorized equipment
143 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
144 2412 ~ 2472 DTS - Digital Transmission System
145 2017-01-13 2412 ~ 2472 DTS - Digital Transmission System Class II Permissive Change
146 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
147 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
148 2016-12-28 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
149 2412 ~ 2472 DTS - Digital Transmission System
150 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
151 2016-11-15 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
152 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
153 2412 ~ 2472 DTS - Digital Transmission System
154 2016-08-29 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX Original Equipment
155 2412 ~ 2472 DTS - Digital Transmission System
156 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter

Application Forms

app s Applicant Information
various Effective 2019-05-07
various 2019-05-06
various 2019-05-05
various 2019-04-26
various 2019-03-25
various 2019-03-22
various 2019-02-12
various 2019-02-05
various 2019-02-02
various 2019-02-01
various 2019-01-30
various 2019-01-23
various 2019-01-22
various 2019-01-20
various 2019-01-19
various 2019-01-03
various 2018-12-31
various 2018-11-27
various 2018-10-09
various 2018-10-08
various 2018-10-05
various 2018-09-21
various 2018-09-12
various 2018-07-04
various 2018-07-03
various 2018-07-02
various 2018-05-02
various 2018-04-24
various 2018-03-30
various 2018-03-29
various 2018-03-27
various 2018-03-21
various 2018-02-28
various 2018-02-27
various 2018-02-06
various 2018-01-11
various 2017-12-21
various 2017-12-20
various 2017-12-19
various 2017-11-29
various 2017-11-28
various 2017-11-13
various 2017-10-30
various 2017-09-21
various 2017-07-11
various 2017-03-02
various 2017-01-13
various 2016-12-28
various 2016-11-15
various 2016-08-29
various Applicant's complete, legal business name Realtek Semiconductor Corp.
various FCC Registration Number (FRN) 0020109807
various Physical Address No. 2 Innovation Road II, Hsinchu Science Park
various No. 2
various Hsinchu
various Hsinchu, N/A
various Hsinchu, 300
various Taiwan
app s TCB Information
various TCB Application Email Address c******@telefication.com
various T******@TIMCOENGR.COM
various t******@timcoengr.com
various t******@siemic.com
various U******@SGS.COM
various t******@cetecom.com
various u******@sgs.com
various h******@acbcert.com
various TCB Scope A4: UNII devices & low power transmitters using spread spectrum techniques
app s FCC ID
various Grantee Code TX2
various Equipment Product Code RTL8822BE
app s Person at the applicant's address to receive grant or for contact
various Name D******** L****
various Title Project Manager
various Telephone Number 886-3******** Extension:
various Fax Number 886-3********
various E-mail d******@realtek.com
app s Technical Contact
various Firm Name BTL Inc.
various SGS Taiwan Ltd.
various DEKRA Testing and Certification Co., Ltd.
various DEKRA Testing and Certification Co., Ltd
various SGS Taiwan Ltd
various Name S**** L****
various J****** C******
various W******** C******
various V****** W********
various Physical Address No.3 Jinshagang 1st Rd, Shixia, Dalang
various 134, Wu Kung Road, WuKu Industrial Zone
various No. 134, Wu Kung Rd., New Taipei Industrial Park
various 134, Wu Kung Rd., Wuku Industrial Zone
various No.5-22, Ruishukeng, Linkou Dist., New
various No. 134, Wu Kung Rd. New Taipei Industrial Park
various No. 134, Wu Kung rd., New Taipei Industrial Park
various No.5-22, Ruishukeng, Linkou Dist.
various New Taipei City, 24803
various New Taipei City
various Wu Ku District
various New Taipei City, 24457
various China
various Taiwan
various Telephone Number 86-76********
various 88622******** Extension:
various 86-76******** Extension:
various 886 2******** Extension:
various 886 2********
various +886 ********
various 88622******** Extension:
various 88622********
various 886-2******** Extension:
various +886 ******** Extension:
various +8862******** Extension:
various +8862********
various 886 2******** Extension:
various Fax Number 86-76********
various 88622********
various 886 2********
various 886-2********
various 886-2********
various E-mail s******@newbtl.com
various j******@sgs.com
various w******@sgs.com
various v******@dekra.com
app s Non Technical Contact
various Firm Name BTL Inc.
various SGS Taiwan Ltd.
various DEKRA Testing and Certification Co., Ltd.
various SGS Taiwan Ltd
various Name M****** W****
various J**** C****
various W******** C******
various V******** W********
various Physical Address No.3 Jinshagang 1st Rd, Shixia, Dalang
various 134, Wu Kung Road, WuKu Industrial Zone
various No. 134, Wu Kung Rd., New Taipei Industrial Park
various 134, Wu Kung Rd., Wuku Industrial Zone
various No.5-22, Ruishukeng, Linkou Dist., New
various No. 134, Wu Kung Rd. New Taipei Industrial Park
various No. 134, Wu Kung rd., New Taipei Industrial Park
various New Taipei City, 24803
various Wu Ku District
various New Taipei City
various China
various Taiwan
various Telephone Number 86-76********
various 88622******** Extension:
various 86-76******** Extension:
various 886 2******** Extension:
various 88622******** Extension:
various 88622********
various 886-2******** Extension:
various +886 ******** Extension:
various +886 ********
various +8862******** Extension:
various +8862********
various 886 2******** Extension:
various Fax Number 86-76********
various 88622********
various 886 2********
various 886-2********
various +886 ********
various E-mail m******@newbtl.com
various j******@sgs.com
various w******@sgs.com
various v******@dekra.com
app s Confidentiality (long or short term)
various Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousNo
variousLong-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousNo
variousIf so, specify the short-term confidentiality release date (MM/DD/YYYY format)10/28/2019
various10/13/2019
various09/21/2019
various09/18/2019
various08/11/2019
various08/03/2019
various08/02/2019
various07/31/2019
various07/29/2019
various07/22/2019
various07/21/2019
various07/20/2019
various07/18/2019
various07/02/2019
various06/29/2019
various05/26/2019
various04/07/2019
various04/06/2019
various04/03/2019
various03/20/2019
various03/12/2019
various01/01/2019
various12/31/2018
various12/30/2018
various10/30/2018
various10/21/2018
various09/27/2018
various09/26/2018
various09/23/2018
various09/05/2018
various08/28/2018
various08/09/2018
various08/05/2018
various06/19/2018
various06/18/2018
various06/17/2018
various05/28/2018
various05/27/2018
various05/12/2018
various04/28/2018
various01/07/2018
various08/23/2017
various07/12/2017
various06/26/2017
various05/14/2017
various02/22/2017
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
various Is this application for software defined/cognitive radio authorization?No
variousEquipment ClassNII - Unlicensed National Information Infrastructure TX
variousDTS - Digital Transmission System
variousDSS - Part 15 Spread Spectrum Transmitter
variousDescription of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)802.11a/b/g/n/ac RTL8822BE Combo module
variousRTL8822BE Combo module
various802.11 a/b/g/n/ac RTL8822BE Combo module
various802.11 a/b/g/n/ac RTL 8822BE Combo module
various802.11a/b/g/n/ac TRL8822BE Combo Module
various802.11a/b/g/n/ac RTL8822BE Combo Module
various802.11 a/b/g/n/ac RTL8822BE Combo Module
various802.11a/b/g/n/acRTL8822BECombomodule
various802.11a/b/g/n/ac/ RTL8822BE Combo module
variousRelated OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?No
variousYes
variousModular Equipment TypeSingle Modular Approval
variousLimited Single Modular Approval
variousDoes not apply
variousPurpose / Application is forClass II Permissive Change
variousClass II permissive change or modification of presently authorized equipment
variousOriginal Equipment
variousComposite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?Yes
variousRelated Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
variousGrant CommentsClass II Permissive Change: This change is to incorporate this Module into portable host(Brand: Lenovo, Model Number: Lenovo IdeaPad S540-15IWL GTX) and as described in this filing) and to add 1-group new antennas as described in this filing. The highest reported SAR for body, simultaneous transmission conditions are 1.54 W/kg, 0.80 W/kg, respectively. Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes.
variousClass II Permissive Change: This change is to incorporate this Module into portable host(Brand: Lenovo, Model Number: Lenovo IdeaPad S540-15IWL GTX) and as described in this filing) and to add 1-groups new antennas as described in this filing. The highest reported SAR for body, simultaneous transmission exposure conditions are 0.42 W/kg, and 0.80 W/kg, respectively. Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz and 40 MHz bandwidth modes.
variousClass II Permissive Change: This change is to incorporate this module into portable host (Brand: Lenovo, Model Number: Lenovo IdeaPad S540-15IWL GTX) and as described in this filing) and to add 1-group new antennas as described in this filing. The highest reported SAR for simultaneous transmission exposure condition is 1.54 W/kg. Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.
variousClass II Permissive Change: This change is to request approval for portable category specific host, notebook PC, (Brand/Model Number : HP/TPC-Q036-BP) with 2 new antennas(Vendor: INPAQ, Part Number: WA-P-LB-02-644(DQ60PLB0245)(Tx1) and WA-P-LB-02-643(DQ60PLB0244)(Tx2)). The highest reported SAR for body, simultaneous transmission and extremity exposure conditions are < 0.1 W/kg, < 0.1 W/kg and 0.71 W/kg, respectively. Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz and 40 MHz bandwidth modes.
variousClass II Permissive Change: This change is to request approval for portable category specific host, notebook PC, (Brand/Model Number : HP/TPC-Q036-BP) with 2 new antennas(Vendor: INPAQ, Part Number: WA-P-LB-02-644(DQ60PLB0245)(Tx1) and WA-P-LB-02-643(DQ60PLB0244)(Tx2)). The highest reported SAR for body, simultaneous transmission and extremity exposure conditions are 0.14 W/kg, 0.20 W/kg and 1.19 W/kg, respectively. Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes.
variousClass II Permissive Change: This change is to request approval for portable category specific host, notebook PC, (Brand/Model Number : HP/TPC-Q036-BP) with 2 new antennas(Vendor: INPAQ, Part Number: WA-P-LB-02-644(DQ60PLB0245)(Tx1) and WA-P-LB-02-643(DQ60PLB0244)(Tx2)). The highest reported SAR for simultaneous transmission exposure condition is 0.14 W/kg . Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.
variousLimited Modular Approval. Power listed is maximum combined conducted output power. This device has 20 and 40 MHz bandwidth modes. Class II Permissive Change: Adds portable operation when integrated into HP Notebook Computer, Model: HSN-I31C. The highest reported Body and Simultaneous SAR values are 0.56 W/kg and 0.91 W/kg respectively, when integrated using the antennas indicated below: Main Antenna type: PIFA, Manufacturer: WNC, Part Number: 6036B0238001. PIFA, Manufacturer: AWAN, Part Number: 6036B0235501. PIFA, Manufacturer: Hong-Bo, Part Number: 6036B0236801. AUX Antenna type: PIFA, Manufacturer: WNC, Part Number: 6036B0238101. PIFA, Manufacturer: AWAN, Part Number: 6036B0235601. PIFA, Manufacturer: Hong-Bo, Part Number: 6036B0236701.
variousLimited Modular Approval. Power listed is maximum combined conducted output power. This device has 20, 40 and 80 MHz bandwidth modes. Class II Permissive Change: Adds portable operation when integrated into HP Notebook Computer, Model: HSN-I31C. The highest reported Body and Simultaneous SAR values are 1.05 W/kg and 0.80 W/kg respectively, when integrated using the antennas indicated below: Main Antenna type: PIFA, Manufacturer: WNC, Part Number: 6036B0238001. PIFA, Manufacturer: AWAN, Part Number: 6036B0235501. PIFA, Manufacturer: Hong-Bo, Part Number: 6036B0236801. AUX Antenna type: PIFA, Manufacturer: WNC, Part Number: 6036B0238101. PIFA, Manufacturer: AWAN, Part Number: 6036B0235601. PIFA, Manufacturer: Hong-Bo, Part Number: 6036B0236701.
variousLimited Modular Approval. Power listed is maximum conducted output power. Class II Permissive Change: Adds portable operation when integrated into HP Notebook Computer, Model: HSN-I31C. SAR compliance demonstrated when integrated using the antennas indicated below: Main Antenna type: PIFA, Manufacturer: WNC, Part Number: 6036B0238001. PIFA, Manufacturer: AWAN, Part Number: 6036B0235501. PIFA, Manufacturer: Hong-Bo, Part Number: 6036B0236801. AUX Antenna type: PIFA, Manufacturer: WNC, Part Number: 6036B0238101. PIFA, Manufacturer: AWAN, Part Number: 6036B0235601. PIFA, Manufacturer: Hong-Bo, Part Number: 6036B0236701.
variousLimited Modular Approval. Power listed is maximum combined conducted output power. This device has 20 and 40 MHz bandwidth modes. Class II Permissive Change: Adds portable operation when integrated into HP Notebook Computer, Model: HSN-I30C. The highest reported Body and Simultaneous SAR values are 0.43 W/kg and 0.58 W/kg respectively, when integrated using the antennas indicated below: Main Antenna type: PIFA, Manufacturer: WNC, Part Number: 6036B0238401. PIFA, Manufacturer: AWAN, Part Number: 6036B0236001. PIFA, Manufacturer: Hong-Bo, Part Number: 6036B0236401. AUX Antenna type: PIFA, Manufacturer: WNC, Part Number: 6036B0237401. PIFA, Manufacturer: AWAN, Part Number: 6036B0235901. PIFA, Manufacturer: Hong-Bo, Part Number: 6036B0236301.
variousLimited Modular Approval. Power listed is maximum conducted output power. Class II Permissive Change: Adds portable operation when integrated into HP Notebook Computer, Model: HSN-I30C. SAR compliance demonstrated when integrated using the antennas indicated below: Main Antenna type: PIFA, Manufacturer: WNC, Part Number: 6036B0238401. PIFA, Manufacturer: AWAN, Part Number: 6036B0236001. PIFA, Manufacturer: Hong-Bo, Part Number: 6036B0236401. AUX Antenna type: PIFA, Manufacturer: WNC, Part Number: 6036B0237401. PIFA, Manufacturer: AWAN, Part Number: 6036B0235901. PIFA, Manufacturer: Hong-Bo, Part Number: 6036B0236301.
variousLimited Modular Approval. Power listed is maximum combined conducted output power. This device has 20, 40 and 80 MHz bandwidth modes. Class II Permissive Change: Adds portable operation when integrated into HP Notebook Computer, Model: HSN-I30C. The highest reported Body and Simultaneous SAR values are 1.12 W/kg and 0.91 W/kg respectively, when integrated using the antennas indicated below: Main Antenna type: PIFA, Manufacturer: WNC, Part Number: 6036B0238401. PIFA, Manufacturer: AWAN, Part Number: 6036B0236001. PIFA, Manufacturer: Hong-Bo, Part Number: 6036B0236401. AUX Antenna type: PIFA, Manufacturer: WNC, Part Number: 6036B0237401. PIFA, Manufacturer: AWAN, Part Number: 6036B0235901. PIFA, Manufacturer: Hong-Bo, Part Number: 6036B0236301.
variousClass II Permissive Change: This change is to incorporate this Module into portable host (Brand/Model Number : Lenovo ; Lenovo IdeaPad S540-15IWL and as described in this filing) and to add 2-groups new antennas as described in this filing. The highest reported SAR for body, and simultaneous transmission use conditions are 0.99 W/kg, 1.03 W/kg, respectively. Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes.
variousClass II Permissive Change: This change is to incorporate this Module into portable host (Brand/Model Number : Lenovo ; Lenovo IdeaPad S540-15IWL and as described in this filing) and to add 2-groups new antennas as described in this filing. The highest reported SAR for simultaneous transmission use conditions is 1.03 W/kg. Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.
variousClass II Permissive Change: This change is to incorporate this Module into portable host (Brand/Model Number : Lenovo ; Lenovo IdeaPad S540-15IWL and as described in this filing) and to add 2-groups new antennas as described in this filing. The highest reported SAR for body, and simultaneous transmission use conditions are 0.26 W/kg, 1.25 W/kg, respectively. Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz and 40 MHz bandwidth modes.
variousClass II Permissive Change: Add portable use in Lenovo Ideapad S540-14IWL********, 81ND********; Lenovo IdeaPad S540-14IWL Touch********, 81QX********; Lenovo IdeaPad S540-14API********, 81NH********, *, (x=0~9, A~Z, a~z, - or blank). The highest reported SAR for body and simultaneous transmission exposure condition is 0.72W/kg and 1.19W/kg respectively. The antenna type: PIFA, Manufacturer: AWAN, Main Antenna part no ANP6Y100298 (DC330029000), Gain 1.13dBi (5GHz), 1.95dBi (2.4GHz), Aux Antenna part no ANP6Y100299 (DC330029010), Gain 1.91dBi (5GHz), -0.63dBi (2.4GHz); The antenna type: PIFA, Manufacturer: YAGEO Corporation Main Antenna part no ANTA0LC13101WLAN1 (DC330029G00), Gain 2.78dBi (5GHz), 0.00dBi (2.4GHz), Aux Antenna part no ANTA0LC13101WLAN2 (DC330029G10), Gain 0.93dBi (5GHz), 1.03dBi (2.4GHz). Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz and 40 MHz bandwidth modes.
variousClass II Permissive Change: Add portable use in Lenovo Ideapad S540-14IWL********, 81ND********; Lenovo IdeaPad S540-14IWL Touch********, 81QX********; Lenovo IdeaPad S540-14API********, 81NH********, *, (x=0~9, A~Z, a~z, - or blank). The highest reported SAR for body and simultaneous transmission exposure condition is 0.47W/kg and 1.19W/kg respectively. The antenna type: PIFA, Manufacturer: AWAN, Main Antenna part no ANP6Y100298 (DC330029000), Gain 1.13dBi (5GHz), 1.95dBi (2.4GHz), Aux Antenna part no ANP6Y100299 (DC330029010), Gain 1.91dBi (5GHz), -0.63dBi (2.4GHz); The antenna type: PIFA, Manufacturer: YAGEO Corporation Main Antenna part no ANTA0LC13101WLAN1 (DC330029G00), Gain 2.78dBi (5GHz), 0.00dBi (2.4GHz), Aux Antenna part no ANTA0LC13101WLAN2 (DC330029G10), Gain 0.93dBi (5GHz), 1.03dBi (2.4GHz). Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz and 40 MHz bandwidth modes.
variousClass II Permissive Change: Add portable use in Lenovo Ideapad S540-14IWL********, 81ND********; Lenovo IdeaPad S540-14IWL Touch********, 81QX********; Lenovo IdeaPad S540-14API********, 81NH********, *, (x=0~9, A~Z, a~z, - or blank). The highest reported SAR for body and simultaneous transmission exposure condition is <0.10W/kg and 1.19W/kg respectively. The antenna type: PIFA, Manufacturer: AWAN, Main Antenna part no ANP6Y100298 (DC330029000), Gain 1.13dBi (5GHz), 1.95dBi (2.4GHz), Aux Antenna part no ANP6Y100299 (DC330029010), Gain 1.91dBi (5GHz), -0.63dBi (2.4GHz); The antenna type: PIFA, Manufacturer: YAGEO Corporation Main Antenna part no ANTA0LC13101WLAN1 (DC330029G00), Gain 2.78dBi (5GHz), 0.00dBi (2.4GHz), Aux Antenna part no ANTA0LC13101WLAN2 (DC330029G10), Gain 0.93dBi (5GHz), 1.03dBi (2.4GHz). Single Modular Approval. Power listed is maximum conducted. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.
variousC2PC to add Lenovo Ideapad C340-14IWL********, 81N4********, Lenovo Ideapad FLEX-14IWL********, 81SQ********, Lenovo IdeaPad C340-14API********, 81N6********, Lenovo IdeaPad FLEX-14API********, 81SS******** (x=0~9, A~Z, a~z, - or blank). The highest reported SAR for body and simultaneous transmission exposure condition is 1.11W/kg and 1.28W/kg respectively. Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz and 40 MHz bandwidth modes.
variousC2PC to add Lenovo Ideapad C340-14IWL********, 81N4********, Lenovo Ideapad FLEX-14IWL********, 81SQ********, Lenovo IdeaPad C340-14API********, 81N6********, Lenovo IdeaPad FLEX-14API********, 81SS******** (x=0~9, A~Z, a~z, - or blank). The highest reported SAR for body and simultaneous transmission exposure condition is 0.17W/kg and 0.63W/kg respectively. Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz and 40 MHz bandwidth modes.
variousC2PC to add Lenovo Ideapad C340-14IWL********, 81N4********, Lenovo Ideapad FLEX-14IWL********, 81SQ********, Lenovo IdeaPad C340-14API********, 81N6********, Lenovo IdeaPad FLEX-14API********, 81SS******** (x=0~9, A~Z, a~z, - or blank). Single Modular Approval. Power listed is maximum conducted. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.
variousLimited Modular Approval. Power listed is maximum power conducted. This device has 20, 40 and 80 MHz bandwidth modes. Class II Permissive Change: Adds portable operation when integrated into HP Notebook PC, Model: TPN-W143. The highest reported Body and Simultaneous SAR values are 1.35 W/kg and 1.35 W/kg respectively, when integrated using the antennas indicated below: Main Antenna type: PIFA, Manufacturer: WNC, Part Number: 025.901HL.0001. AUX Antenna type: PIFA, Manufacturer: WNC, Part Number: 025.901HL.0001.
variousLimited Modular Approval. Power listed is maximum power conducted. This device has 20 MHz and 40 MHz bandwidth modes. Class II Permissive Change: Adds portable operation when integrated into HP Notebook PC, Model: TPN-W143. The highest reported Body and Simultaneous SAR values are 0.35 W/kg and 0.39 W/kg respectively, when integrated using the antennas indicated below: Main Antenna type: PIFA, Manufacturer: WNC, Part Number: 025.901HL.0001. AUX Antenna type: PIFA, Manufacturer: WNC, Part Number: 025.901HL.0001.
variousLimited Modular Approval. Power listed is maximum power conducted. This device has 20 MHz and 40 MHz bandwidth modes. Class II Permissive Change: Adds portable operation when integrated into HP Notebook PC, Model: TPN-W143. RF exposure compliance was demonstrated, when integrated using the antennas indicated below: Main Antenna type: PIFA, Manufacturer: WNC, Part Number: 025.901HL.0001. AUX Antenna type: PIFA, Manufacturer: WNC, Part Number: 025.901HL.0001.
variousLimited Modular Approval. Power listed is maximum power conducted. Class II Permissive Change: Adds portable operation when integrated into HP Notebook PC, Model: TPN-W141, using the antennas indicated below: Main Antenna type: PIFA, Manufacturer: INPAQ, Part Number: 025.901H2.0001 (WA-P-LB-02-598). AUX Antenna type: PIFA, Manufacturer: INPAQ, Part Number: 025.901H3.0001 (WA-P-LB-02-599).
variousLimited Modular Approval. Power listed is maximum power conducted. This device has 20, 40 and 80 MHz bandwidth modes. Class II Permissive Change: Adds portable operation when integrated into HP Notebook PC, Model: TPN-W141. The highest reported Body and Simultaneous SAR values are 1.20 W/kg and 1.35 W/kg respectively, when integrated using the antennas indicated below: Main Antenna type: PIFA, Manufacturer: INPAQ, Part Number: 025.901H2.0001 (WA-P-LB-02-598). AUX Antenna type: PIFA, Manufacturer: INPAQ, Part Number: 025.901H3.0001 (WA-P-LB-02-599).
variousLimited Modular Approval. Power listed is maximum power conducted. This device has 20 MHz and 40 MHz bandwidth modes. Class II Permissive Change: Adds portable operation when integrated into HP Notebook PC, Model: TPN-W141. The highest reported Body and Simultaneous SAR values are 0.55 W/kg and 1.03 W/kg respectively, when integrated using the antennas indicated below: Main Antenna type: PIFA, Manufacturer: INPAQ, Part Number: 025.901H2.0001 (WA-P-LB-02-598). AUX Antenna type: PIFA, Manufacturer: INPAQ, Part Number: 025.901H3.0001 (WA-P-LB-02-599).
variousLimited Modular Approval. Power listed is maximum power conducted. This device has 20, 40 and 80 MHz bandwidth modes. Class II Permissive Change: Adds portable operation when integrated into HP Notebook PC, Model: TPN-W139. The highest reported Body and Simultaneous SAR values are 1.39 W/kg and 1.53 W/kg respectively, when integrated using the antennas indicated below: Main Antenna type: PIFA, Manufacturer: INPAQ, Part Number: 025.901HA.0001. AUX Antenna type: PIFA, Manufacturer: INPAQ, Part Number: 025.901HB.0001.
variousLimited Modular Approval. Power listed is maximum power conducted. This device has 20 MHz and 40 MHz bandwidth modes. Class II Permissive Change: Adds portable operation when integrated into HP Notebook PC, Model: TPN-W139. The highest reported Body and Simultaneous SAR values are 0.49 W/kg and 0.71 W/kg respectively, when integrated using the antennas indicated below: Main Antenna type: PIFA, Manufacturer: INPAQ, Part Number: 025.901HA.0001. AUX Antenna type: PIFA, Manufacturer: INPAQ, Part Number: 025.901HB.0001.
variousLimited Modular Approval. Power listed is maximum power conducted. Class II Permissive Change: Adds portable operation when integrated into HP Notebook PC, Model: TPN-W139, using the antennas indicated below: Main Antenna type: PIFA, Manufacturer: INPAQ, Part Number: 025.901HA.0001. AUX Antenna type: PIFA, Manufacturer: INPAQ, Part Number: 025.901HB.0001.
variousLimited Modular Approval. Power listed is maximum power conducted. Class II Permissive Change: Adds portable operation when integrated into HP Notebook PC, Model: TPN-W140. The highest reported Body and Simultaneous SAR values are < 0.10 W/kg and 1.26 W/kg respectively, when integrated using the antennas indicated below: Main Antenna type: PIFA, Manufacturer: INPAQ, Part Number: 025.901GW.0001. AUX Antenna type: PIFA, Manufacturer: INPAQ, Part Number: 025.901GX.0001.
variousLimited Modular Approval. Power listed is maximum power conducted. This device has 20 MHz and 40 MHz bandwidth modes. Class II Permissive Change: Adds portable operation when integrated into HP Notebook PC, Model: TPN-W140. The highest reported Body and Simultaneous SAR values are 0.88 W/kg and 1.46 W/kg respectively, when integrated using the antennas indicated below: Main Antenna type: PIFA, Manufacturer: INPAQ, Part Number: 025.901GW.0001. AUX Antenna type: PIFA, Manufacturer: INPAQ, Part Number: 025.901GX.0001.
variousLimited Modular Approval. Power listed is maximum power conducted.. This device has 20, 40 and 80 MHz bandwidth modes. Class II Permissive Change: Adds portable operation when integrated into HP Notebook PC, Model: TPN-W140. The highest reported Body and Simultaneous SAR values are 1.25 W/kg and 1.26 W/kg respectively, when integrated using the antennas indicated below: Main Antenna type: PIFA, Manufacturer: INPAQ, Part Number: 025.901GW.0001. AUX Antenna type: PIFA, Manufacturer: INPAQ, Part Number: 025.901GX.0001.
variousC2PC to add Lenovo Ideapad C340-15IWL********, 81N5********, Lenovo Ideapad FLEX-15IWL********, 81SR********, (x=0~9, A~Z, a~z, - or blank). The highest reported SAR for body and simultaneous transmission exposure condition is 0.44W/kg and 0.40W/kg respectively. Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz and 40 MHz bandwidth modes.
variousC2PC to add Lenovo Ideapad C340-15IWL********, 81N5********, Lenovo Ideapad FLEX-15IWL********, 81SR********, (x=0~9, A~Z, a~z, - or blank). Single Modular Approval. Power listed is maximum conducted. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.
variousC2PC to add Lenovo Ideapad C340-15IWL********, 81N5********, Lenovo Ideapad FLEX-15IWL********, 81SR********, (x=0~9, A~Z, a~z, - or blank). The highest reported SAR for body and simultaneous transmission exposure condition is 0.47W/kg and 0.64W/kg respectively. Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz and 40 MHz bandwidth modes.
variousClass II Permissive Change: Add portable use in HP Notebook PC, Model TPN-Q217. The antenna type: PIFA, Manufacturer: High-Tek Electronics Co. Ltd, Main Antenna part no DQ60ACQD021 (0ACQD018012N), Gain -2.61dBi (5GHz), -0.09dBi (2.4GHz), Aux Antenna part no DQ60ACQD021 (0ACQD018012N), Gain -1.20dBi (5GHz), -1.31dBi (2.4GHz); The antenna type: PIFA, Manufacturer: INPAQ, Main antenna part no DQ6LB020700 (WA-P-LBLB-02-070) , Gain 1.01dBi (5GHz), -0.60dBi (2.4GHz), Aux Antenna part no DQ6LB020700 (WA-P-LBLB-02-070) , Gain 0.11dBi (5GHz), -0.42dBi (2.4GHz); The antenna type: PIFA, Manufacturer: WNC Main Antenna part no. DQ6415GHA00 (81EAA415.GHA), Gain 1.08dBi (5GHz), 1.83dBi (2.4GHz), Aux Antenna part no. DQ6415GHA00 (81EAA415.GHA), Gain 0.16dBi (5GHz), 1.25dBi (2.4GHz). The highest reported SAR < 0.10W/Kg. Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Fixed outdoor applications for point to multipoint operations are subject to the conditions in Part 15.407(a)(1)(i). Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labelling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.
variousClass II Permissive Change: Add portable use in HP Notebook PC, Model TPN-Q217. The antenna type: PIFA, Manufacturer: High-Tek Electronics Co. Ltd, Main Antenna part no DQ60ACQD021 (0ACQD018012N), Gain -2.61dBi (5GHz), -0.09dBi (2.4GHz), Aux Antenna part no DQ60ACQD021 (0ACQD018012N), Gain -1.20dBi (5GHz), -1.31dBi (2.4GHz); The antenna type: PIFA, Manufacturer: INPAQ, Main antenna part no DQ6LB020700 (WA-P-LBLB-02-070) , Gain 1.01dBi (5GHz), -0.60dBi (2.4GHz), Aux Antenna part no DQ6LB020700 (WA-P-LBLB-02-070) , Gain 0.11dBi (5GHz), -0.42dBi (2.4GHz); The antenna type: PIFA, Manufacturer: WNC Main Antenna part no. DQ6415GHA00 (81EAA415.GHA), Gain 1.08dBi (5GHz), 1.83dBi (2.4GHz), Aux Antenna part no. DQ6415GHA00 (81EAA415.GHA), Gain 0.16dBi (5GHz), 1.25dBi (2.4GHz). The highest reported SAR < 0.10W/Kg. Single Modular Approval. Power listed is maximum conducted. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes.
variousClass II Permissive Change: Add portable use in HP Notebook PC, Model TPN-Q217. The antenna type: PIFA, Manufacturer: High-Tek Electronics Co. Ltd, Main Antenna part no DQ60ACQD021 (0ACQD018012N), Gain -2.61dBi (5GHz), -0.09dBi (2.4GHz), Aux Antenna part no DQ60ACQD021 (0ACQD018012N), Gain -1.20dBi (5GHz), -1.31dBi (2.4GHz); The antenna type: PIFA, Manufacturer: INPAQ, Main antenna part no DQ6LB020700 (WA-P-LBLB-02-070) , Gain 1.01dBi (5GHz), -0.60dBi (2.4GHz), Aux Antenna part no DQ6LB020700 (WA-P-LBLB-02-070) , Gain 0.11dBi (5GHz), -0.42dBi (2.4GHz); The antenna type: PIFA, Manufacturer: WNC Main Antenna part no. DQ6415GHA00 (81EAA415.GHA), Gain 1.08dBi (5GHz), 1.83dBi (2.4GHz), Aux Antenna part no. DQ6415GHA00 (81EAA415.GHA), Gain 0.16dBi (5GHz), 1.25dBi (2.4GHz). The highest reported SAR < 0.10W/Kg. Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz and 40 MHz bandwidth modes.
variousLimited Modular Approval. Power listed is maximum power conducted.. This device has 20, 40, and 80 MHz bandwidth modes. Class II Permissive Change: Adds portable operation when integrated into HP Notebook PC, Model: HSN-Q17C-4. The highest reported Body and Simultaneous SAR values are 1.13 W/kg and 1.28 W/kg respectively, when integrated using the antennas indicated below: Main Antenna type: PIFA, Manufacturer: WNC, Part Number: DQ6415GGQ00 (81EAA415.GGQ), Gain: -1.12 dBi. Aux Antenna type: PIFA, Manufacturer: WNC, Part Number: DQ6415GGQ00 (81EAA415.GGQ), Gain: -0.95 dBi. Main Antenna type: PIFA, Manufacturer: HONGBO, Part Number: DQ602375000(260-23750), Gain: -2.18 dBi. Aux Antenna type: PIFA, Manufacturer: HONGBO, Part Number: DQ602375000 (260-23750), Gain: -2.35 dBi.
variousLimited Modular Approval. Power listed is maximum power conducted. This device has 20 MHz and 40 MHz bandwidth modes. Class II Permissive Change: Adds portable operation when integrated into HP Notebook PC, Model: HSN-Q17C-4. The highest reported Body and Simultaneous SAR values are 0.60 W/kg and 0.94 W/kg respectively, when integrated using the antennas indicated below: Main Antenna type: PIFA, Manufacturer: WNC, Part Number: DQ6415GGQ00 (81EAA415.GGQ), Gain : -1.79 dBi. Aux Antenna type: PIFA, Manufacturer: WNC, Part Number: DQ6415GGQ00(81EAA415.GGQ), Gain: -0.77 dBi. Main Antenna type: PIFA, Manufacturer: HONGBO, Part Number: DQ602375000(260-23750), Gain: -0.85 dBi. Aux Antenna type: PIFA, Manufacturer: HONGBO, Part Number: DQ602375000 (260-23750), Gain: -2.46 dBi.
variousLimited Modular Approval. Power listed is maximum power conducted. Class II Permissive Change: Adds portable operation when integrated into HP Notebook PC, Model: HSN-Q17C-4. Compliance is dependent upon the use of the antennas below: Main Antenna type: PIFA, Manufacturer: WNC, Part Number: DQ6415GGQ00 (81EAA415.GGQ), Gain : -1.79 dBi. Aux Antenna type: PIFA, Manufacturer: WNC, Part Number: DQ6415GGQ00(81EAA415.GGQ), Gain: -0.77 dBi. Main Antenna type: PIFA, Manufacturer: HONGBO, Part Number: DQ602375000(260-23750), Gain: -0.85 dBi. Aux Antenna type: PIFA, Manufacturer: HONGBO, Part Number: DQ602375000 (260-23750), Gain: -2.46 dBi.
variousClass II Permissive Change: Adds portable use in HP Notebook PC, Model HSN-Q17C-5. Main Antenna type: PIFA, Manufacturer: WNC, Part Number: DQ6415GGW00 (81EAA415.GGW), Gain 2.4G: -1.51 dBi Aux Antenna type: PIFA, Manufacturer: WNC, Part Number: DQ6415GGW00(81EAA415.GGW), Gain 2.4G: -3.07 dBi Main Antenna type: PIFA, Manufacturer: HONGBO, Part Number: DQ602374600 (260-23746), Gain 2.4G: -2.35 dBi Aux Antenna type: PIFA, Manufacturer: HONGBO, Part Number: DQ602374600 (260-23746), Gain 2.4G: -2.29 dBi This device must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.62 W/kg and 0.99 W/kg, respectively. Limited Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz and 40 MHz bandwidth modes.
variousClass II Permissive Change: Adds portable use in HP Notebook PC, Model HSN-Q17C-5. Main Antenna type: PIFA, Manufacturer: WNC, Part Number: DQ6415GGW00 (81EAA415.GGW), Gain 5G: -1.82 dBi Aux Antenna type: PIFA, Manufacturer: WNC, Part Number: DQ6415GGW00(81EAA415.GGW), Gain 5G: -2.29 dBi Main Antenna type: PIFA, Manufacturer: HONGBO, Part Number: DQ602374600 (260-23746), Gain 5G: -1.3 dBi Aux Antenna type: PIFA, Manufacturer: HONGBO, Part Number: DQ602374600 (260-23746), Gain 5G: -3.04 dBi This device must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.16 W/kg and 1.31 W/kg, respectively. Limited Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes.
variousClass II Permissive Change: Adds portable use in HP Notebook PC, Model HSN-Q17C-5. Main Antenna type: PIFA, Manufacturer: WNC, Part Number: DQ6415GGW00 (81EAA415.GGW), Gain 2.4G: -1.51 dBi Aux Antenna type: PIFA, Manufacturer: WNC, Part Number: DQ6415GGW00(81EAA415.GGW), Gain 2.4G: -3.07 dBi Main Antenna type: PIFA, Manufacturer: HONGBO, Part Number: DQ602374600 (260-23746), Gain 2.4G: -2.35 dBi Aux Antenna type: PIFA, Manufacturer: HONGBO, Part Number: DQ602374600 (260-23746), Gain 2.4G: -2.29 dBi This device must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. Limited Single Modular Approval. Power listed is maximum conducted. This module is restricted to indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.
variousClass II Permissive Change: Adds portable use in HP Notebook Computer, Model HSN-I25C. This device must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. The highest reported SAR for body and simultaneous transmission exposure conditions are < 0.10 W/kg and 0.75 W/kg, respectively. Limited Single Modular Approval. Power listed is maximum conducted. This module is restricted to indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.
variousClass II Permissive Change: Adds portable use in HP Notebook Computer, Model HSN-I25C. This device must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.73 W/kg and 1.37 W/kg, respectively. Limited Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes.
variousClass II Permissive Change: Adds portable use in HP Notebook Computer, Model HSN-I25C. This device must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.23 W/kg and 0.41 W/kg, respectively. Limited Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz and 40 MHz bandwidth modes.
variousClass II Permissive Change: Adds portable use in HP Notebook Computer, Model HSN-Q16C. This device must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.13 W/kg and 1.13 W/kg, respectively. TS Main Antenna type: PIFA, Manufacturer: WNC, Part Number: DQ6415GGZ00 (81EAA415.GGZ), Gain 5G: -2.85 dBi Aux Antenna type: PIFA, Manufacturer: WNC, Part Number: DQ6415GGZ00 (81EAA415.GGZ), Gain 5G: -0.69 dBi Main Antenna type: PIFA, Manufacturer: HONGBO, Part Number: DQ602374500 (260-23745), Gain 5G: -2.83 dBi Aux Antenna type: PIFA, Manufacturer: HONGBO, Part Number: DQ602374500 (260-23745), Gain 5G: -3.03 dBi NTS Main Antenna type: PIFA, Manufacturer: WNC, Part Number: DQ6415GGW00 (81EAA415.GGW), Gain 5G: -1.82 dBi Aux Antenna type: PIFA, Manufacturer: WNC, Part Number: DQ6415GGW00(81EAA415.GGW), Gain 5G: -2.29 dBi Main Antenna type: PIFA, Manufacturer: HONGBO, Part Number: DQ602374600 (260-23746), Gain 5G: -1.3 dBi Aux Antenna type: PIFA, Manufacturer: HONGBO, Part Number: DQ602374600 (260-23746), Gain 5G: -3.04 dBi Limited Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes.
variousClass II Permissive Change: Adds portable use in HP Notebook Computer, Model HSN-Q16C. This device must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.63 W/kg and 0.93 W/kg, respectively. TS Main Antenna type: PIFA, Manufacturer: WNC, Part Number: DQ6415GGZ00 (81EAA415.GGZ), Gain 2.4G: -2.98 dBi Aux Antenna type: PIFA, Manufacturer: WNC, Part Number: DQ6415GGZ00 (81EAA415.GGZ), Gain 2.4G: -2.61 dBi Main Antenna type: PIFA, Manufacturer: HONGBO, Part Number: DQ602374500 (260-23745), Gain 2.4G: -2.46 dBi Aux Antenna type: PIFA, Manufacturer: HONGBO, Part Number: DQ602374500 (260-23745), Gain 2.4G: -2.09 dBi NTS Main Antenna type: PIFA, Manufacturer: WNC, Part Number: DQ6415GGW00 (81EAA415.GGW), Gain 2.4G: -1.51 dBi Aux Antenna type: PIFA, Manufacturer: WNC, Part Number: DQ6415GGW00(81EAA415.GGW), Gain 2.4G: -3.07 dBi Main Antenna type: PIFA, Manufacturer: HONGBO, Part Number: DQ602374600 (260-23746), Gain 2.4G: -2.35 dBi Aux Antenna type: PIFA, Manufacturer: HONGBO, Part Number: DQ602374600 (260-23746), Gain 2.4G: -2.29 dBi Limited Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz and 40 MHz bandwidth modes.
variousClass II Permissive Change: Adds portable use in HP Notebook Computer, Model HSN-Q16C. This device must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. TS Main Antenna type: PIFA, Manufacturer: WNC, Part Number: DQ6415GGZ00 (81EAA415.GGZ), Gain 2.4G: -2.98 dBi Main Antenna type: PIFA, Manufacturer: HONGBO, Part Number: DQ602374500 (260-23745), Gain 2.4G: -2.46 dBi NTS Main Antenna type: PIFA, Manufacturer: WNC, Part Number: DQ6415GGW00 (81EAA415.GGW), Gain 2.4G: -1.51 dBi Main Antenna type: PIFA, Manufacturer: HONGBO, Part Number: DQ602374600 (260-23746), Gain 2.4G: -2.35 dBi Limited Single Modular Approval. Power listed is maximum conducted. This module is restricted to indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.
variousClass II Permissive Change: Adds portable use in HP Notebook Computer, Model HSN-Q15C. This device must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.19 W/kg and 1.19 W/kg, respectively. TH Main Antenna type: PIFA, Manufacturer: WNC, Part Number: DQ6415GGT00 (81EAA415.GGT), Gain 5G: 0.82 dBi Aux Antenna type: PIFA, Manufacturer: WNC, Part Number: DQ6415GGT00 (81EAA415.GGT), Gain 5G: -1.65 dBi Main Antenna type: PIFA, Manufacturer: HONGBO, Part Number: DQ602374900 (260-23749), Gain 5G: -1.27 dBi Aux Antenna type: PIFA, Manufacturer: HONGBO, Part Number: DQ602374900 (260-23749), Gain 5G: -2.82 dBi NTH Main Antenna type: PIFA, Manufacturer: WNC, Part Number: DQ6415GGQ00 (81EAA415.GGQ), Gain 5G: -1.12 dBi Aux Antenna type: PIFA, Manufacturer: WNC, Part Number: DQ6415GGQ00(81EAA415.GGQ), Gain 5 G: -0.95 dBi Main Antenna type: PIFA, Manufacturer: HONGBO, Part Number: DQ602375000(260-23750), Gain 5G: -2.18 dBi Aux Antenna type: PIFA, Manufacturer: HONGBO, Part Number: DQ602375000 (260-23750), Gain 5G: -2.35 dBi Limited Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes.
variousClass II Permissive Change: Adds portable use in HP Notebook Computer, Model HSN-Q15C. This device must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. TH Main Antenna type: PIFA, Manufacturer: WNC, Part Number: DQ6415GGT00 (81EAA415.GGT), Gain 2.4G: -2.88 dBi Main Antenna type: PIFA, Manufacturer: HONGBO, Part Number: DQ602374900 (260-23749), Gain 2.4G: -1.08 dBi NTH Main Antenna type: PIFA, Manufacturer: WNC, Part Number: DQ6415GGQ00 (81EAA415.GGQ), Gain 2.4G: -1.79 dBi Main Antenna type: PIFA, Manufacturer: HONGBO, Part Number: DQ602375000(260-23750), Gain 2.4G: -0.85 dBi Limited Single Modular Approval. Power listed is maximum conducted. This module is restricted to indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.
variousClass II Permissive Change: Adds portable use in HP Notebook Computer, Model HSN-Q15C. This device must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.55 W/kg and 0.84 W/kg, respectively. TH Main Antenna type: PIFA, Manufacturer: WNC, Part Number: DQ6415GGT00 (81EAA415.GGT), Gain 2.4G: -2.88 dBi Aux Antenna type: PIFA, Manufacturer: WNC, Part Number: DQ6415GGT00 (81EAA415.GGT), Gain 2.4G: -2.1 dBi Main Antenna type: PIFA, Manufacturer: HONGBO, Part Number: DQ602374900 (260-23749), Gain 2.4G: -1.08 dBi Aux Antenna type: PIFA, Manufacturer: HONGBO, Part Number: DQ602374900 (260-23749), Gain 2.4G: -2.73 dBi NTH Main Antenna type: PIFA, Manufacturer: WNC, Part Number: DQ6415GGQ00 (81EAA415.GGQ), Gain 2.4G: -1.79 dBi Aux Antenna type: PIFA, Manufacturer: WNC, Part Number: DQ6415GGQ00(81EAA415.GGQ), Gain 2.4G: -0.77 dBi Main Antenna type: PIFA, Manufacturer: HONGBO, Part Number: DQ602375000(260-23750), Gain 2.4G: -0.85 dBi Aux Antenna type: PIFA, Manufacturer: HONGBO, Part Number: DQ602375000 (260-23750), Gain 2.4G: -2.46 dBi Limited Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz and 40 MHz bandwidth modes.
variousClass II Permissive Change: Adds portable use in HP Notebook Computer, Model HSN-Q14C. This device must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.95 W/kg and 0.95 W/kg, respectively. TH Main Antenna type: PIFA, Manufacturer: WNC, Part Number: DQ6415GGM00 (81EAA415.GGM), Gain 5G: -2.39 dBi Aux Antenna type: PIFA, Manufacturer: WNC, Part Number: DQ6415GGM00 (81EAA415.GGM), Gain 5G: -0.51 dBi Main Antenna type: PIFA, Manufacturer: HONGBO, Part Number: DQ602375300 (260-23753), Gain 5G: -1.56 dBi Aux Antenna type: PIFA, Manufacturer: HONGBO, Part Number: DQ602375300 (260-23753), Gain 5G: -2.79 dBi Main Antenna type: PIFA, Manufacturer: INPAQ, Part Number: DQ6LB020602 (WA-P-LBLB-02-064), Gain 5G: 2.78 dBi Aux Antenna type: PIFA, Manufacturer: INPAQ, Part Number: DQ6LB020602 (WA-P-LBLB-02-064), Gain 5G: -1.61 dBi NTH Main Antenna type: PIFA, Manufacturer: WNC, Part Number: DQ6415GGJ00 (81EAA415.GGJ), Gain 5G: -1.95 dBi Aux Antenna type: PIFA, Manufacturer: WNC, Part Number: DQ6415GGJ00 (81EAA415.GGJ), Gain 5G: -2.97 dBi Main Antenna type: PIFA, Manufacturer: HONGBO, Part Number: DQ602375400 (260-23754), Gain 5G: -2.44 dBi Aux Antenna type: PIFA, Manufacturer: HONGBO, Part Number: DQ602375400 (260-23754), Gain 5G: -2.4 dBi Main Antenna type: PIFA, Manufacturer: INPAQ, Part Number: DQ6LB020603 (WA-P-LBLB-02-063), Gain 5G: 1.94 dBi Aux Antenna type: PIFA, Manufacturer: INPAQ, Part Number: DQ6LB020603 (WA-P-LBLB-02-063), Gain 5G: 1.1 dBi Limited Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes.
variousClass II Permissive Change: Adds portable use in HP Notebook Computer, Model HSN-Q14C. This device must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. TH Antenna type: PIFA, Manufacturer: WNC, Part Number: DQ6415GGM00 (81EAA415.GGM), Gain 2.4G: -1.86 dBi Antenna type: PIFA, Manufacturer: HONGBO, Part Number: DQ602375300 (260-23753), Gain 2.4G: -2.66 dBi Antenna type: PIFA, Manufacturer: INPAQ, Part Number: DQ6LB020602 (WA-P-LBLB-02-064), Gain 2.4G: -0.55 dBi NTH Antenna type: PIFA, Manufacturer: WNC, Part Number: DQ6415GGJ00 (81EAA415.GGJ), Gain 2.4G: -3.04 dBi Antenna type: PIFA, Manufacturer: HONGBO, Part Number: DQ602375400 (260-23754), Gain 2.4G: -2.51 dBi Antenna type: PIFA, Manufacturer: INPAQ, Part Number: DQ6LB020603 (WA-P-LBLB-02-063), Gain 2.4G: 0.85 dBi Limited Single Modular Approval. Power listed is maximum conducted. This module is restricted to indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.
variousClass II Permissive Change: Adds portable use in HP Notebook Computer, Model HSN-Q14C. This device must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.71 W/kg and 0.95 W/kg, respectively. TH Main Antenna type: PIFA, Manufacturer: WNC, Part Number: DQ6415GGM00 (81EAA415.GGM), Gain 2.4G: -1.86 dBi Aux Antenna type: PIFA, Manufacturer: WNC, Part Number: DQ6415GGM00 (81EAA415.GGM), Gain 2.4G: -1.51 dBi Main Antenna type: PIFA, Manufacturer: HONGBO, Part Number: DQ602375300 (260-23753), Gain 2.4G: -2.66 dBi Aux Antenna type: PIFA, Manufacturer: HONGBO, Part Number: DQ602375300 (260-23753), Gain 2.4G: -2.87 dBi Main Antenna type: PIFA, Manufacturer: INPAQ, Part Number: DQ6LB020602 (WA-P-LBLB-02-064), Gain 2.4G: -0.55 dBi Aux Antenna type: PIFA, Manufacturer: INPAQ, Part Number: DQ6LB020602 (WA-P-LBLB-02-064), Gain 2.4G: -0.95 dBi NTH Main Antenna type: PIFA, Manufacturer: WNC, Part Number: DQ6415GGJ00 (81EAA415.GGJ), Gain 2.4G: -3.04 dBi Aux Antenna type: PIFA, Manufacturer: WNC, Part Number: DQ6415GGJ00 (81EAA415.GGJ), Gain 2.4G: -2.22 dBi Main Antenna type: PIFA, Manufacturer: HONGBO, Part Number: DQ602375400 (260-23754), Gain 2.4G: -2.51 dBi Aux Antenna type: PIFA, Manufacturer: HONGBO, Part Number: DQ602375400 (260-23754), Gain 2.4G: -2.02 dBi Main Antenna type: PIFA, Manufacturer: INPAQ, Part Number: DQ6LB020603 (WA-P-LBLB-02-063), Gain 2.4G: 0.85 dBi Aux Antenna type: PIFA, Manufacturer: INPAQ, Part Number: DQ6LB020603 (WA-P-LBLB-02-063), Gain 2.4G: 1.07 dBi Limited Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz and 40 MHz bandwidth modes.
variousClass II Permissive Change: Adds portable use in HP Notebook Computer, Model HSN-I21C. This device must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.23 W/kg and 0.40 W/kg, respectively. Limited Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz and 40 MHz bandwidth modes.
variousClass II Permissive Change: Adds portable use in HP Notebook Computer, Model HSN-I21C. This device must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.71 W/kg and 1.39 W/kg, respectively. Limited Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz and 40 MHz bandwidth modes.
variousClass II Permissive Change: Adds portable use in HP Notebook Computer, Model HSN-I21C. This device must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. The highest reported SAR for body and simultaneous transmission exposure conditions are < 0.10 W/kg and 0.70 W/kg, respectively. Limited Single Modular Approval. Power listed is maximum conducted. This module is restricted to indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.
variousC2PC to add Lenovo ideapad S530-13IWL********, 81J7********, (x=0~9, A~Z, a~z, - or blank). The highest reported SAR for body and simultaneous transmission exposure condition is <0.10W/kg and 0.96W/kg respectively. Single Modular Approval. Power listed is maximum conducted. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.
variousC2PC to add Lenovo ideapad S530-13IWL********, 81J7********, (x=0~9, A~Z, a~z, - or blank). The highest reported SAR for body and simultaneous transmission exposure condition is 0.96W/kg and 0.96W/kg respectively. Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz and 40 MHz bandwidth modes.
variousC2PC to add Lenovo ideapad S530-13IWL********, 81J7********, (x=0~9, A~Z, a~z, - or blank). The highest reported SAR for body and simultaneous transmission exposure condition is 0.28W/kg and 0.28W/kg respectively. Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz and 40 MHz bandwidth modes.
variousPower Output listed is conducted. C2PC: Integration in a new portable host (Brand name: HP / model: HSN-I17C-4) and to add a new antenna as described in this filing: Main Antenna, Type: PIFA; Brand Name: HONGBO: Parts Number: 6036B0219201 (260-27178) Peak Gain: 2.4GHz, -0.17 dBi, 5GHz, -0.09 dBi. Aux Antenna, Type: PIFA; Brand Name: HONGBO; Parts Number: 6036B0219101 (260-27179), Peak Gain: 2.4GHz, -2.15 dBi, 5GHz: 2.75 dBi. Antennas already listed on the original grant are: Main Antenna, Type: PIFA; Brand Name: ACON: Parts Number: 6036B0198501 (ANP6Y-100180) Peak Gain: 2.4GHz: -2.52 dBi, 5GHz: 0.43 dBi Aux Antenna Type: PIFA; Brand Name: ACON: Parts Number: 6036B0198601 (ANP6Y-100181) Peak Gain: 2.4GHz: -2.05 dBi, 5GHz: -0.60 dBi Main Antenna, Type: PIFA; Brand Name: WNC: Parts Number: 6036B0198201 (81EAA415-GAL) Peak Gain 2.4GHz: -1.18 dBi, 5GHz: -0.37 dBi Aux Antenna Type: PIFA; Brand Name: WNC: Parts Number: 6036B0198401 (81EAA415-GAM) Peak Gain 2.4GHz: -2.39 dBi, 5GHz: -2.23 dBi Single Modular Approval. Power listed is maximum conducted. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes. The highest reported SAR values for stand-alone & simultaneous transmission exposure conditions are: 0.95W/kg and 1.55W/kg respectively.
variousPower Output listed is conducted. C2PC: Integration in a new portable host (Brand name: HP / model: HSN-I17C-4) and to add a new antenna as described in this filing: Main Antenna, Type: PIFA; Brand Name: HONGBO: Parts Number: 6036B0219201 (260-27178) Peak Gain: 2.4GHz, -0.17 dBi, 5GHz, -0.09 dBi Aux Antenna, Type: PIFA; Brand Name: HONGBO; Parts Number: 6036B0219101 (260-27179), Peak Gain: 2.4GHz, -2.15 dBi, 5GHz: 2.75 dBi. Antennas already listed on the original grant are: Main Antenna, Type: PIFA; Brand Name: ACON: Parts Number: 6036B0198501 (ANP6Y-100180) Peak Gain: 2.4GHz: -2.52 dBi, 5GHz: 0.43 dBi Aux Antenna Type: PIFA; Brand Name: ACON: Parts Number: 6036B0198601 (ANP6Y-100181) Peak Gain: 2.4GHz: -2.05 dBi, 5GHz: -0.60 dBi Main Antenna, Type: PIFA; Brand Name: WNC: Parts Number: 6036B0198201 (81EAA415-GAL) Peak Gain 2.4GHz: -1.18 dBi, 5GHz: -0.37 dBi Aux Antenna Type: PIFA; Brand Name: WNC: Parts Number: 6036B0198401 (81EAA415-GAM) Peak Gain 2.4GHz: -2.39 dBi, 5GHz: -2.23 dBi Single Modular Approval. Power listed is maximum conducted. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The highest reported SAR values for stand-alone & simultaneous transmission exposure conditions are: 0.49 W/kg and 1.016 W/kg respectively.
variousPower Output listed is conducted. C2PC: Integration in a new portable host (Brand name: HP / model: HSN-I17C-5) and to add a new antenna as described in this filing: Main Antenna, Type: PIFA; Brand Name: HONGBO: Parts Number: 6036B0219601 (260-27182) Peak Gain: 2.4GHz, 0.04 dBi, 5GHz, -2.05 dBi. Aux Antenna, Type: PIFA; Brand Name: HONGBO; Parts Number: 6036B0219501 (260-27183), Peak Gain: 2.4GHz, -2.38 dBi, 5GHz: -2.94 dBi. Antennas already listed on the original grant are: Main Antenna, Type: PIFA; Brand Name: ACON: Parts Number: 6036B0199301 (ANP6Y-100182) Peak Gain: 2.4GHz: -0.99 dBi, 5GHz: 1.37 dBi Aux Antenna Type: PIFA; Brand Name: ACON: Parts Number: 6036B0197901 (ANP6Y-100183) Peak Gain: 2.4GHz: -3.96 dBi, 5GHz: 2.27 dBi Main Antenna, Type: PIFA; Brand Name: WNC: Parts Number: 6036B0198901 (81EAA415-GAN) Peak Gain 2.4GHz: -4.62 dBi, 5GHz: -2.88 dBi Aux Antenna Type: PIFA; Brand Name: WNC: Parts Number: 6036B0199001 (81EAA415-GAP) Peak Gain 2.4GHz: -3.62 dBi, 5GHz: -3.98 dBi Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz and 40 MHz bandwidth modes. The highest reported SAR values for stand-alone & simultaneous transmission exposure conditions are: 0.660 W/kg & 1.241 W/kg respectively.
variousPower Output listed is conducted. C2PC: Integration in a new portable host (Brand name: HP / model: HSN-I17C-5) and to add a new antenna as described in this filing: Main Antenna, Type: PIFA; Brand Name: HONGBO: Parts Number: 6036B0219601 (260-27182) Peak Gain: 2.4GHz, 0.04 dBi, 5GHz, -2.05 dBi. Aux Antenna, Type: PIFA; Brand Name: HONGBO; Parts Number: 6036B0219501 (260-27183), Peak Gain: 2.4GHz, -2.38 dBi, 5GHz: -2.94 dBi. Antennas already listed on the original grant are: Main Antenna, Type: PIFA; Brand Name: ACON: Parts Number: 6036B0199301 (ANP6Y-100182) Peak Gain: 2.4GHz: -0.99 dBi, 5GHz: 1.37 dBi Aux Antenna Type: PIFA; Brand Name: ACON: Parts Number: 6036B0197901 (ANP6Y-100183) Peak Gain: 2.4GHz: -3.96 dBi, 5GHz: 2.27 dBi Main Antenna, Type: PIFA; Brand Name: WNC: Parts Number: 6036B0198901 (81EAA415-GAN) Peak Gain 2.4GHz: -4.62 dBi, 5GHz: -2.88 dBi Aux Antenna Type: PIFA; Brand Name: WNC: Parts Number: 6036B0199001 (81EAA415-GAP) Peak Gain 2.4GHz: -3.62 dBi, 5GHz: -3.98 dBi Single Modular Approval. Power listed is maximum conducted. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The highest reported SAR values for stand-alone & simultaneous transmission exposure conditions are: 0.660 W/kg & 0.660 W/kg respectively.
variousPower Output listed is conducted. C2PC: Integration in a new portable host (Brand name: HP / model: HSN-I17C-5) and to add a new antenna as described in this filing: Main Antenna, Type: PIFA; Brand Name: HONGBO: Parts Number: 6036B0219601 (260-27182) Peak Gain: 2.4GHz, 0.04 dBi, 5GHz, -2.05 dBi. Aux Antenna, Type: PIFA; Brand Name: HONGBO; Parts Number: 6036B0219501 (260-27183), Peak Gain: 2.4GHz, -2.38 dBi, 5GHz: -2.94 dBi. Antennas already listed on the original grant are: Main Antenna, Type: PIFA; Brand Name: ACON: Parts Number: 6036B0199301 (ANP6Y-100182) Peak Gain: 2.4GHz: -0.99 dBi, 5GHz: 1.37 dBi Aux Antenna Type: PIFA; Brand Name: ACON: Parts Number: 6036B0197901 (ANP6Y-100183) Peak Gain: 2.4GHz: -3.96 dBi, 5GHz: 2.27 dBi Main Antenna, Type: PIFA; Brand Name: WNC: Parts Number: 6036B0198901 (81EAA415-GAN) Peak Gain 2.4GHz: -4.62 dBi, 5GHz: -2.88 dBi Aux Antenna Type: PIFA; Brand Name: WNC: Parts Number: 6036B0199001 (81EAA415-GAP) Peak Gain 2.4GHz: -3.62 dBi, 5GHz: -3.98 dBi Single Modular Approval. Power listed is maximum conducted. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes. The highest reported SAR values for stand-alone & simultaneous transmission exposure conditions are 0.68W/kg and 1.115W/kg respectively
variousPower Output listed is conducted. C2PC: Integration in a new portable host (Brand name: HP / model: HSN-I17C-4) and to add a new antenna as described in this filing: Main Antenna, Type: PIFA; Brand Name: HONGBO: Parts Number: 6036B0219201 (260-27178) Peak Gain: 2.4GHz, -0.17 dBi, 5GHz, -0.09 dBi. Aux Antenna, Type: PIFA; Brand Name: HONGBO; Parts Number: 6036B0219101 (260-27179), Peak Gain: 2.4GHz, -2.15 dBi, 5GHz: 2.75 dBi. Antennas already listed on the original grant are: Main Antenna, Type: PIFA; Brand Name: ACON: Parts Number: 6036B0198501 (ANP6Y-100180) Peak Gain: 2.4GHz: -2.52 dBi, 5GHz: 0.43 dBi Aux Antenna Type: PIFA; Brand Name: ACON: Parts Number: 6036B0198601 (ANP6Y-100181) Peak Gain: 2.4GHz: -2.05 dBi, 5GHz: -0.60 dBi Main Antenna, Type: PIFA; Brand Name: WNC: Parts Number: 6036B0198201 (81EAA415-GAL) Peak Gain 2.4GHz: -1.18 dBi, 5GHz: -0.37 dBi Aux Antenna Type: PIFA; Brand Name: WNC: Parts Number: 6036B0198401 (81EAA415-GAM) Peak Gain 2.4GHz: -2.39 dBi, 5GHz: -2.23 dBi Single Modular Approval. Power listed is maximum conducted. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz and 40 MHz bandwidth modes. The highest reported SAR values for stand-alone & simultaneous transmission exposure conditions are: 0.49 W/kg & 0.767 W/kg respectively.
variousClass II Permissive Change: This change is to incorporate this Module into portable host (Brand/Model: HP/ HSN-I13C-4) and to add 1 pair of antennas (Main and Aux) as described in this filing. The highest reported SAR for body, and simultaneous transmission use conditions are 0.88 W/kg, 1.53 W/kg, respectively. PIFA, Main Antenna HONGBO 6036B0219201 (260-27178) (Peak Gain at 2.4GHz: -0.17 dBi, at 5GHz: -0.09 dBi) PIFA, Aux Antenna HONGBO 6036B0219101 (260-27179) (Peak Gain at 2.4GHz: -2.15 dBi, at 5GHz: 2.75 dBi) PIFA, Main Antenna ACON 6036B0198501 (ANP6Y-100180) (Peak Gain at 2.4GHz: -2.52 dBi, at 5GHz: 0.43 dBi) PIFA, Aux Antenna ACON 6036B0198601 (ANP6Y-100181) (Peak Gain at 2.4GHz: -2.05 dBi, at 5GHz: -0.60 dBi) PIFA, Main Antenna WNC 6036B0198201 (81EAA415-GAL) (Peak Gain at 2.4GHz: -1.18 dBi, at 5GHz: -0.37 dBi) PIFA, Aux Antenna WNC 6036B0198401 (81EAA415-GAM) (Peak Gain at 2.4GHz: -2.39 dBi, at 5GHz: -2.23 dBi) Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes.
variousClass II Permissive Change: This change is to incorporate this Module into portable host (Brand/Model: HP/ HSN-I13C-4) and to add 1 pair of antennas (Main and Aux) as described in this filing. The highest reported SAR for body, and simultaneous transmission use conditions are 0.46 W/kg, 0.92 W/kg, respectively. PIFA, Main Antenna HONGBO 6036B0219201 (260-27178) (Peak Gain at 2.4GHz: -0.17 dBi, at 5GHz: -0.09 dBi) PIFA, Aux Antenna HONGBO 6036B0219101 (260-27179) (Peak Gain at 2.4GHz: -2.15 dBi, at 5GHz: 2.75 dBi) PIFA, Main Antenna ACON 6036B0198501 (ANP6Y-100180) (Peak Gain at 2.4GHz: -2.52 dBi, at 5GHz: 0.43 dBi) PIFA, Aux Antenna ACON 6036B0198601 (ANP6Y-100181) (Peak Gain at 2.4GHz: -2.05 dBi, at 5GHz: -0.60 dBi) PIFA, Main Antenna WNC 6036B0198201 (81EAA415-GAL) (Peak Gain at 2.4GHz: -1.18 dBi, at 5GHz: -0.37 dBi) PIFA, Aux Antenna WNC 6036B0198401 (81EAA415-GAM) (Peak Gain at 2.4GHz: -2.39 dBi, at 5GHz: -2.23 dBi) Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz and 40 MHz bandwidth modes.
variousClass II Permissive Change: This change is to incorporate this Module into portable host (Brand/Model: HP/ HSN-I13C-4) and to add 1 pair of antennas (Main and Aux) as described in this filing. The highest reported SAR for simultaneous transmission use conditions is 0.92 W/kg. PIFA, Main Antenna HONGBO 6036B0219201 (260-27178) (Peak Gain at 2.4GHz: -0.17 dBi, at 5GHz: -0.09 dBi) PIFA, Aux Antenna HONGBO 6036B0219101 (260-27179) (Peak Gain at 2.4GHz: -2.15 dBi, at 5GHz: 2.75 dBi) PIFA, Main Antenna ACON 6036B0198501 (ANP6Y-100180) (Peak Gain at 2.4GHz: -2.52 dBi, at 5GHz: 0.43 dBi) PIFA, Aux Antenna ACON 6036B0198601 (ANP6Y-100181) (Peak Gain at 2.4GHz: -2.05 dBi, at 5GHz: -0.60 dBi) PIFA, Main Antenna WNC 6036B0198201 (81EAA415-GAL) (Peak Gain at 2.4GHz: -1.18 dBi, at 5GHz: -0.37 dBi) PIFA, Aux Antenna WNC 6036B0198401 (81EAA415-GAM) (Peak Gain at 2.4GHz: -2.39 dBi, at 5GHz: -2.23 dBi) Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.
variousClass II Permissive Change: This change is to incorporate this Module into portable host (Brand/Model: HP/ HSN-I13C-5) and to add 1 pair of antennas as described in this filing. The highest reported SAR for body, and simultaneous transmission use conditions are 1.12 W/kg, 1.20 W/kg, respectively. PIFA, Main Antenna HONGBO 6036B0219601 (260-27182) (Peak Gain at 2.4GHz: 0.04 dBi, at 5GHz: -2.05 dBi) PIFA, Aux Antenna HONGBO 6036B0219501 (260-27183) (Peak Gain at 2.4GHz: -2.38 dBi, at 5GHz: -2.94 dBi) PIFA, Main Antenna ACON 6036B0199301 (ANP6Y-100182) (Peak Gain at 2.4GHz: -0.99 dBi, at 5GHz: 1.37 dBi) PIFA, Aux Antenna ACON 6036B0197901 (ANP6Y-100183) (Peak Gain at 2.4GHz: -3.96 dBi, at 5GHz: 2.27 dBi) PIFA, Main Antenna WNC 6036B0198901 (81EAA415.GAN) (Peak Gain at 2.4GHz: -4.62 dBi, at 5GHz: -2.88 dBi) PIFA, Aux Antenna WNC 6036B0199001 (81EAA415.GAP) (Peak Gain at 2.4GHz: -3.62 dBi, at 5GHz: -3.98 dBi) Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz and 40 MHz bandwidth modes.
variousClass II Permissive Change: This change is to incorporate this Module into portable host (Brand/Model: HP/ HSN-I13C-5) and to add 1 pair of antennas as described in this filing. The highest reported SAR for simultaneous transmission use conditions is 1.20 W/kg. PIFA, Main Antenna HONGBO 6036B0219601 (260-27182) (Peak Gain at 2.4GHz: 0.04 dBi, at 5GHz: -2.05 dBi) PIFA, Aux Antenna HONGBO 6036B0219501 (260-27183) (Peak Gain at 2.4GHz: -2.38 dBi, at 5GHz: -2.94 dBi) PIFA, Main Antenna ACON 6036B0199301 (ANP6Y-100182) (Peak Gain at 2.4GHz: -0.99 dBi, at 5GHz: 1.37 dBi) PIFA, Aux Antenna ACON 6036B0197901 (ANP6Y-100183) (Peak Gain at 2.4GHz: -3.96 dBi, at 5GHz: 2.27 dBi) PIFA, Main Antenna WNC 6036B0198901 (81EAA415.GAN) (Peak Gain at 2.4GHz: -4.62 dBi, at 5GHz: -2.88 dBi) PIFA, Aux Antenna WNC 6036B0199001 (81EAA415.GAP) (Peak Gain at 2.4GHz: -3.62 dBi, at 5GHz: -3.98 dBi) Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz and 40 MHz bandwidth modes.
variousClass II Permissive Change: This change is to incorporate this Module into portable host (Brand/Model: HP/ HSN-I13C-5) and to add 1 pair of antennas as described in this filing. The highest reported SAR for body, and simultaneous transmission use conditions are 0.78 W/kg, 1.46 W/kg, respectively. PIFA, Main Antenna HONGBO 6036B0219601 (260-27182) (Peak Gain at 2.4GHz: 0.04 dBi, at 5GHz: -2.05 dBi) PIFA, Aux Antenna HONGBO 6036B0219501 (260-27183) (Peak Gain at 2.4GHz: -2.38 dBi, at 5GHz: -2.94 dBi) PIFA, Main Antenna ACON 6036B0199301 (ANP6Y-100182) (Peak Gain at 2.4GHz: -0.99 dBi, at 5GHz: 1.37 dBi) PIFA, Aux Antenna ACON 6036B0197901 (ANP6Y-100183) (Peak Gain at 2.4GHz: -3.96 dBi, at 5GHz: 2.27 dBi) PIFA, Main Antenna WNC 6036B0198901 (81EAA415.GAN) (Peak Gain at 2.4GHz: -4.62 dBi, at 5GHz: -2.88 dBi) PIFA, Aux Antenna WNC 6036B0199001 (81EAA415.GAP) (Peak Gain at 2.4GHz: -3.62 dBi, at 5GHz: -3.98 dBi) Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes.
variousCIIPC to add host HP Notebook PC model TPN-W124. The highest reported SAR for body and simultaneous transmission mode are <0.10W/kg, and 0.70W/kg. Single Modular Approval. Power listed is maximum conducted. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.
variousCIIPC to add host HP Notebook PC model TPN-W124. The highest reported SAR for body and simultaneous transmission mode are 0.50W/kg, and 0.55W/kg. Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz and 40 MHz bandwidth modes.
variousCIIPC to add host HP Notebook PC model TPN-W124. The highest reported SAR for body and simultaneous transmission mode are 1.17W/kg, and 0.70W/kg. Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz and 40 MHz bandwidth modes.
variousClass II Permissive Change: This change is to incorporate this Module into portable host (Brand/Model: HP/HSN-W01C) and to add 2 new antennas as described in this filing. The highest reported SAR for simultaneous transmission use conditions is 0.67 W/kg. Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.
variousClass II Permissive Change: This change is to incorporate this Module into portable host (Brand/Model: HP/HSN-W01C) and to add 2 new antennas as described in this filing. The highest reported SAR for body, and simultaneous transmission use conditions are 0.96 W/kg, 1.026 W/kg, respectively. Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes.
variousClass II Permissive Change: This change is to incorporate this Module into portable host (Brand/Model: HP/HSN-W01C) and to add 2 new antennas as described in this filing. The highest reported SAR for body, and simultaneous transmission use conditions are 0.61 W/kg, 1.026 W/kg, respectively. Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz and 40 MHz bandwidth modes.
variousClass II Change: This change is to incorporate this Module into notebook plate-form (TPN-W133) as described in this filing. Any configuration other than the one described will require a separate approval. The highest reported SAR for body, and simultaneous transmission use conditions are 0.02 W/kg and 1.29 W/kg respectively. Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 15.204 (c) and different antenna configurations.
variousClass II Change: This change is to incorporate this Module into notebook plate-form (TPN-W136) as described in this filing. Any configuration other than the one described will require a separate approval. The highest reported SAR for body, and simultaneous transmission use conditions are <0.1 W/kg and 0.68 W/kg respectively. Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 15.204 (c) and different antenna configurations.
variousClass II Change: This change is to incorporate this Module into notebook plate-form (TPN-W133) as described in this filing. The highest reported SAR for body, and simultaneous transmission use conditions are 1.27 W/kg and 1.29 W/kg, respectively. Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in 2x2 MIMO configurations as described in this filing. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 15.204(c ) and different antenna configurations. This device has 20 MHz, 40MHz and 80 MHz bandwidth modes
variousClass II Change: This change is to incorporate this Module into notebook plate-form (TPN-W136) as described in this filing. Any configuration other than the one described will require a separate approval. The highest reported SAR for body, and simultaneous transmission use conditions are 0.28 W/kg and 0.68 W/kg respectively. Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in 2x2 MIMO configurations as described in this filing. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 15.204 (c) and different antenna configurations. This device has 20 MHz and 40 MHz bandwidth modes.
variousClass II Change: This change is to incorporate this Module into notebook plate-form (TPN-W133) as described in this filing. Any configuration other than the one described will require a separate approval. The highest reported SAR for body, and simultaneous transmission use conditions are 0.44 W/kg and 1.29 W/kg respectively. Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in 2x2 MIMO configurations as described in this filing. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 15.204 (c) and different antenna configurations. This device has 20 MHz and 40 MHz bandwidth modes.
variousClass II Change: This change is to incorporate this Module into notebook plate-form (TPN-W136) as described in this filing. The highest reported SAR for body, and simultaneous transmission use conditions are 0.68W/kg and 0.68 W/kg, respectively. Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in 2x2 MIMO configurations as described in this filing. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 15.204(c ) and different antenna configurations. This device has 20 MHz, 40MHz and 80 MHz bandwidth modes.
variousClass II Change: This change is to incorporate this Module into notebook plate-form (TPN-W134, TPN-W135) as described in this filing. Any configuration other than the one described will require a separate approval. The highest reported SAR for body, and simultaneous transmission use conditions are 0.15 W/kg and 0.85W/kg, respectively. Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in 2x2 MIMO configurations as described in this filing. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 15.204 (c) and different antenna configurations. This device has 20 MHz and 40 MHz bandwidth modes.
variousClass II Change: This change is to incorporate this Module into notebook plate-form (TPN-W134, TPN-W135) as described in this filing. The highest reported SAR for body, and simultaneous transmission use conditions are 0.83W/kg and 0.85 W/kg, respectively. Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in 2x2 MIMO configurations as described in this filing. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 15.204(c ) and different antenna configurations. This device has 20 MHz, 40MHz and 80 MHz bandwidth modes.
variousClass II Change: This change is to incorporate this Module into notebook plate-form (TPN-W134, TPN-W135) as described in this filing. Any configuration other than the one described will require a separate approval. The highest reported SAR for body and simultaneous transmission use conditions are 0.02 W/kg and 0.85W/kg, respectively. Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 15.204 (c) and different antenna configurations.
variousClass II Permissive Change with a decrease in the WLAN Output Power and channels 12 and 13 are disabled through firmware, add to request approval for portable category specific host notebook/tablet (Lenovo ideapad FLEX 6-14IKB, Lenovo ideapad FLEX 6-14ARR). The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be informed regarding RF exposure compliance. The highest reported SAR values for body exposure and simultaneous use conditions are 0.36 W/kg, and 1.39 W/kg, respectively. Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz and 40 MHz bandwidth modes.
variousClass II Permissive Change with a decrease in the WLAN Output Power and channels 12 and 13 are disabled through firmware, add to request approval for portable category specific host notebook/tablet (Lenovo ideapad FLEX 6-14IKB, Lenovo ideapad FLEX 6-14ARR). Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Fixed outdoor applications for point to multipoint operations are subject to the conditions in Part 15.407(a)(1)(i). Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labelling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.
variousClass II Permissive Change with a decrease in the WLAN Output Power and channels 12 and 13 are disabled through firmware, add to request approval for portable category specific host notebook/tablet (Lenovo ideapad FLEX 6-14IKB, Lenovo ideapad FLEX 6-14ARR). The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be informed regarding RF exposure compliance. The highest reported SAR values for body exposure and simultaneous use conditions are 1.29 W/kg, and 1.39 W/kg, respectively. Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes.
variousClass II Permissive Change: This change is to incorporate this Module into portable host (Brand/Model: HP/TPN-W132) and to add 2 new antennas as described in this filing. The highest reported SAR for body, and simultaneous transmission use conditions are 0.99 W/kg, 1.00 W/kg, respectively. Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes.
variousClass II Permissive Change: This change is to incorporate this Module into portable host (Brand/Model: HP/TPN-W132) and to add 2 new antennas as described in this filing. The highest reported SAR for simultaneous transmission use conditions is 1.00 W/kg. Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.
variousClass II Permissive Change: This change is to incorporate this Module into portable host (Brand/Model: HP/TPN-W132) and to add 2 new antennas as described in this filing. The highest reported SAR for body, and simultaneous transmission use conditions are 0.39 W/kg, 0.76 W/kg, respectively. Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz and 40 MHz bandwidth modes.
variousClass II Permissive Change: This change is to incorporate this Module into portable platform (Tablet PC, Model number :TP00098A) and to add 2 new antennas with lower gain values as described in this filing. The highest reported SAR for body, and simultaneous transmission use conditions are 1.21 W/kg, 0.56 W/kg, respectively. Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz and 40 MHz bandwidth modes.
variousClass II Permissive Change: This change is to incorporate this Module into portable platform (Tablet PC, Model number :TP00098A) and to add 2 new antennas with lower gain values as described in this filing. The highest reported SAR for body, and simultaneous transmission use conditions are 1.28 W/kg, 1.35 W/kg, respectively. Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz and 40 MHz bandwidth modes.
variousClass II Permissive Change: This change is to incorporate this Module into portable platform (Tablet PC, Model number :TP00098A) and to add 2 new antennas with lower gain values as described in this filing. The highest reported SAR for simultaneous transmission use conditions is 0.58 W/kg. Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz and 40 MHz bandwidth modes.
variousClass II Permissive Change: This change is to incorporate this Module into portable host (Brand/Model: HP/TPN-W131) and to add 2 new antennas as described in this filing. The highest reported SAR for body, and simultaneous transmission use conditions are 1.18 W/kg, 1.21 W/kg, respectively. Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes.
variousClass II Permissive Change: This change is to incorporate this Module into portable host (Brand/Model: HP/TPN-W131) and to add 2 new antennas as described in this filing. The highest reported SAR for simultaneous transmission use conditions is 1.21 W/kg. Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.
variousClass II Permissive Change: This change is to incorporate this Module into portable host (Brand/Model: HP/TPN-W131) and to add 2 new antennas as described in this filing. The highest reported SAR for body, and simultaneous transmission use conditions are 0.99 W/kg, 1.21 W/kg, respectively. Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz and 40 MHz bandwidth modes.
variousLimited Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to installation in host Lenovo Notebook Computer, Model: Lenovo YOGA 730-13IKB********, 81CT********, (* = 0~9, A~Z, a~z, - or blank). Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 0.46 W/kg and 0.72 W/kg, respectively. This device has 20 MHz and 40 MHz bandwidth modes.
variousLimited Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to installation in host Lenovo Notebook Computer, Model: Lenovo YOGA 730-15IKB********, 81CU********, (* = 0~9, A~Z, a~z, - or blank). Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 0.85 W/kg and 1.02 W/kg, respectively. This device has 20 MHz and 40 MHz bandwidth modes.
variousLimited Single Modular Approval Power listed is maximum conducted. This module is restricted to installation in host Lenovo Notebook Computer, Model: Lenovo YOGA 730-13IKB********, 81CT********, (* = 0~9, A~Z, a~z, - or blank). Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.
variousLimited Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to installation in host Lenovo Notebook Computer, Model: Lenovo YOGA 730-13IKB********, 81CT********, (* = 0~9, A~Z, a~z, - or blank). Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 0.15 W/kg and 0.28 W/kg, respectively. This device has 20 MHz and 40 MHz bandwidth modes.
variousLimited Single Modular Approval Power listed is maximum conducted. This module is restricted to installation in host Lenovo Notebook Computer, Model: Lenovo YOGA 730-15IKB********, 81CU********, (* = 0~9, A~Z, a~z, - or blank). Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.
variousLimited Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to installation in host Lenovo Notebook Computer, Model: Lenovo YOGA 730-15IKB********, 81CU********, (* = 0~9, A~Z, a~z, - or blank). Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 0.71 W/kg and 1.16 W/kg, respectively. This device has 20 MHz and 40 MHz bandwidth modes.
variousClass II Change: This change is to incorporate this Module into notebook plateform (SF20GM2, SF20GM x) as described in this filing. Any configuration other than the one described will require a separate approval. The highest reported SAR for simultaneous transmission use conditions is 0.33W/kg, respectively. Single Modular Approval. Power listed is maximum conducted. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.
variousClass II Change: This change is to a) disable frequency band of 5260- 5320, 5500-5720, 5745- 5825MHz; b) incorporate this Module into notebook plateform (SF20GM2, SF20GM x) as described in this filing. Any configuration other than the one described will require a separate approval. The highest reported SAR for body, and simultaneous transmission use conditions are 1.20 W/kg, 1.35W/kg, respectively. Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz and 40 MHz bandwidth modes.
variousClass II Change: This change is to incorporate this Module into notebook plateform (SF20GM2, SF20GM x) as described in this filing. Any configuration other than the one described will require a separate approval. The highest reported SAR for body, and simultaneous transmission use conditions are 0.49 W/kg, 0.59W/kg, respectively. Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz and 40 MHz bandwidth modes.
variousC2PC: Integration in a new portable host (Brand name: HP / model: HSN-I17C-5). Single Modular Approval. Power listed is maximum conducted. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The highest reported SAR values for stand-alone & simultaneous transmission exposure conditions are: 0.08 W/kg, 0.36 W/kg respectively.
variousC2PC: Integration in a new portable host (Brand name: HP / model: HSN-I17C-5). Single Modular Approval. Power listed is maximum conducted. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes. The highest reported SAR values for stand-alone & simultaneous transmission exposure conditions are: 0.68 W/kg, 0.95 W/kg respectively.
variousC2PC: Integration in a new portable host (Brand name: HP / model: HSN-I17C-5). Single Modular Approval. Power listed is maximum conducted. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz and 40 MHz bandwidth modes. The highest reported SAR values for stand-alone & simultaneous transmission exposure conditions are: 0.54 W/kg, 0.74 W/kg respectively.
variousC2PC: Integration in a new portable host (Brand name: HP / model: HSN-I17C-4). Single Modular Approval. Power listed is maximum conducted. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The highest reported SAR values for stand-alone & simultaneous transmission exposure conditions are: 0.08 W/kg, 0.91 W/kg respectively.
variousC2PC: Integration in a new portable host (Brand name: HP / model: HSN-I17C-4). Single Modular Approval. Power listed is maximum conducted. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz and 40 MHz bandwidth modes. The highest reported SAR values for stand-alone & simultaneous transmission exposure conditions are: 0.49 W/kg, 0.77 W/kg respectively.
variousC2PC: Integration in a new portable host (Brand name: HP / model: HSN-I17C-4). Single Modular Approval. Power listed is maximum conducted. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes. The highest reported SAR values for stand-alone & simultaneous transmission exposure conditions are: 0.83 W/kg, 1.55 W/kg respectively.
variousC2PC: Integration in a new portable host (Brand name: HP / model: HSN-I16C). Single Modular Approval. Power listed is maximum conducted. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The highest reported SAR values for stand-alone & simultaneous transmission exposure conditions are: 0.08 W/kg, 1.01 W/kg respectively.
variousC2PC: Integration in a new portable host (Brand name: HP / model: HSN-I16C). Single Modular Approval. Power listed is maximum conducted. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz and 40 MHz bandwidth modes. The highest reported SAR values for stand-alone & simultaneous transmission exposure conditions are: 0.98 W/kg, 0.53 W/kg respectively.
variousC2PC: Integration in a new portable host (Brand name: HP / model: HSN-I16C). Single Modular Approval. Power listed is maximum conducted. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes. The highest reported SAR values for stand-alone & simultaneous transmission exposure conditions are: 0.93 W/kg, 1.53 W/kg respectively.
variousC2PC: Integration in a new portable host (Brand name: HP / model: HSN-I3C-5). Limited Modular Approval. Power listed is maximum conducted. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The highest reported SAR values for stand-alone & simultaneous transmission exposure conditions are: 0.082 W/kg, 0.838 W/kg respectively.
variousC2PC: Integration in a new portable host (Brand name: HP / model: HSN-I3C-5). Limited Modular Approval. Power listed is maximum conducted. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz and 40 MHz bandwidth modes. The highest reported SAR values for stand-alone & simultaneous transmission exposure conditions are: 0.441 W/kg, 0.790 W/kg respectively.
variousC2PC: Integration in a new portable host (Brand name: HP / model: HSN-I3C-5). Limited Modular Approval. Power listed is maximum conducted. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes. The highest reported SAR values for stand-alone & simultaneous transmission exposure conditions are: 0.756 W/kg, 1.295 W/kg respectively.
variousC2PC: Integration in a new portable host (Brand name: HP / model: HSN-I12C). Limited Modular Approval. Power listed is maximum conducted. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The highest reported SAR values for stand-alone & simultaneous transmission exposure conditions are: 0.082 W/kg, 0.718 W/kg respectively.
variousC2PC: Integration in a new portable host (Brand name: HP / model: HSN-I13C-4). Limited Modular Approval. Power listed is maximum conducted. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz and 40 MHz bandwidth modes. The highest reported SAR values for stand-alone & simultaneous transmission exposure conditions are: 0.430 W/kg, 0.714 W/kg respectively.
variousC2PC: Integration in a new portable host (Brand name: HP / model: HSN-I13C-4). Limited Modular Approval. Power listed is maximum conducted. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The highest reported SAR values for stand-alone & simultaneous transmission exposure conditions are: 0.082 W/kg, 0.722 W/kg respectively.
variousC2PC: Integration in a new portable host (Brand name: HP / model: HSN-I12C). Limited Modular Approval. Power listed is maximum conducted. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz and 40 MHz bandwidth modes. The highest reported SAR values for stand-alone & simultaneous transmission exposure conditions are: 0.655 W/kg, 1.129 W/kg respectively.
variousC2PC: Integration in a new portable host (Brand name: HP / model: HSN-I13C-4). Limited Modular Approval. Power listed is maximum conducted. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes. The highest reported SAR values for stand-alone & simultaneous transmission exposure conditions are: 0.714 W/kg, 1.354 W/kg respectively.
variousC2PC: Integration in a new portable host (Brand name: HP / model: HSN-I12C). Limited Modular Approval. Power listed is maximum conducted. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes. The highest reported SAR values for stand-alone & simultaneous transmission exposure conditions are: 0.736 W/kg, 1.372 W/kg respectively.
variousLimited Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to installation in host Notebook Computer (Model: TPN-Q166/ Brand: HP). Antenna Type: PIFA; Brand Name: WNC; Parts Number: DQ6415G2900 (81EAA415.G29); Peak Gain: 5.2 GHz, 2.79 dBi; 5.5 GHz, 2.76 dBi; 5.8 GHz, 1.49 dBi; Brand Name: INPAQ; Parts Number: DQ6LBLB0200 (WA-P-LBLB-02-019); Peak Gain: 5.2 GHz, 0.58 dBi; 5.5 GHz, 0.28 dBi; 5.8 GHz, 0.28 dBi. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 0.16 W/kg and 0.16 W/kg, respectively. This device has 20 MHz and 40 MHz bandwidth modes.
variousLimited Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to installation in host Notebook Computer (Model: TPN-Q166/ Brand: HP). Antenna Type: PIFA; Brand Name: WNC; Parts Number: DQ6415G2900 (81EAA415.G29); Peak Gain: -1.34 dBi; Brand Name: INPAQ; Parts Number: DQ6LBLB0200 (WA-P-LBLB-02-019); Peak Gain: 1.17 dBi. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are <0.10 W/kg and 0.16 W/kg, respectively. This device has 20 MHz and 40 MHz bandwidth modes.
variousLimited Single Modular Approval. Power listed is maximum conducted. This module is restricted to installation in host Notebook Computer (Model: TPN-Q166/ Brand: HP). Antenna Type: PIFA; Brand Name: WNC; Parts Number: DQ6415G2900 (81EAA415.G29); Peak Gain: -1.34 dBi; Brand Name: INPAQ; Parts Number: DQ6LBLB0200 (WA-P-LBLB-02-019); Peak Gain: 1.17 dBi. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are <0.10 W/kg and 0.16 W/kg, respectively.
variousC2PC: Integration in a new portable host (Brand name: HP / model: TPN-C128). Limited Modular Approval. Power listed is maximum conducted. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The highest reported SAR values for stand-alone & simultaneous transmission exposure conditions are: 0.02 W/kg, 0.89 W/kg respectively.
variousC2PC: Integration in a new portable host (Brand name: HP / model: TPN-C128). Limited Modular Approval. Power listed is maximum conducted. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz and 40 MHz bandwidth modes. The highest reported SAR values for stand-alone & simultaneous transmission exposure conditions are: 0.55 W/kg, 0.78 W/kg respectively.
variousC2PC: Integration in a new portable host (Brand name: HP / model: TPN-C128). Limited Modular Approval. Power listed is maximum conducted. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes. The highest reported SAR values for stand-alone & simultaneous transmission exposure conditions are: 0.87 W/kg, 1.35 W/kg respectively.
variousSingle Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz and 40 MHz bandwidth modes. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: ASUS TP510U, with antenna INPAQ, part no. WA-F-LB-02-477, WA-P-LB-01-193, 04071-01860200, 04071-01860300 and LUXSHARE, part no. NB02-034011-013H, NB02-034011-014H, 04071-01860000, 04071-01860100. The highest reported Body SAR = 0.77W/kg and Simultaneous SAR = 1.12W/kg.
variousSingle Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: ASUS TP510U, with antenna INPAQ, part no. WA-F-LB-02-477, WA-P-LB-01-193, 04071-01860200, 04071-01860300 and LUXSHARE, part no. NB02-034011-013H, NB02-034011-014H, 04071-01860000, 04071-01860100. The highest reported Body SAR = 1.00W/kg and Simultaneous SAR = 1.39W/kg.
variousSingle Modular Approval. Power listed is maximum conducted. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: ASUS TP510U, with antenna INPAQ, part no. WA-F-LB-02-477, WA-P-LB-01-193, 04071-01860200, 04071-01860300 and LUXSHARE, part no. NB02-034011-013H, NB02-034011-014H, 04071-01860000, 04071-01860100. The highest reported Body SAR = 0.35W/kg and Simultaneous SAR = 1.35W/kg.
variousC2PC: Integration in a new portable host (Brand name: HP / model: TPC-Q036-BP). Limited Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz and 40 MHz bandwidth modes. The highest reported SAR values for body-worn, extremity (hand) and simultaneous transmission exposure conditions are: 0.48 W/kg, 1.37W/kg and 0.89 W/kg, 2.37W/kg, respectively.
variousC2PC: Integration in a new portable host (Brand name: HP / model: TPC-Q036-BP). Limited Modular Approval. Power listed is maximum conducted. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The highest reported SAR values for body-worn, extremity (hand) and simultaneous transmission exposure conditions are: 0.15 W/kg, 0.06 W/kg and 0.56 W/kg, 1.43W/kg, respectively.
variousC2PC: Integration in a new portable host (Brand name: HP / model: TPC-Q036-BP). Limited Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz and 40 MHz bandwidth modes. The highest reported SAR values for body-worn, extremity (hand) and simultaneous transmission exposure conditions are: 0.14 W/kg, 1.20W/kg and 0.23 W/kg, 2.20W/kg, respectively.
variousC2PC: Integration in a new portable host (Brand name: HP / model: TPN-W128). Limited Modular Approval. Power listed is maximum conducted. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The highest reported SAR values for stand-alone & simultaneous transmission exposure conditions are: 0.15 W/kg & 1.19 W/kg respectively.
variousC2PC: Integration in a new portable host (Brand name: HP / model: TPN-W128). Limited Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz and 40 MHz bandwidth modes. The highest reported SAR values for stand-alone & simultaneous transmission exposure conditions are: 1.15 W/kg & 1.19 W/kg respectively.
variousC2PC: Integration in a new portable host (Brand name: HP / model: TPN-W128). Limited Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz and 40 MHz bandwidth modes. The highest reported SAR values for stand-alone & simultaneous transmission exposure conditions are: 0.62 W/kg & 1.10 W/kg respectively.
variousLimited Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz and 40 MHz bandwidth modes. (Date of Grant: 08/29/2016) Class II Permissive Change: This C2PC is to add this module to a portable host: Notebook Computer (Model: TP00080B/ Brand: Lenovo). The highest reported SAR is 0.16 W/kg.
variousLimited Single Modular Approval. Power listed is maximum conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. (Date of Grant: 08/29/2016) Class II Permissive Change: This C2PC is to add this module to a portable host: Notebook Computer (Model: TP00080B/ Brand: Lenovo).
variousLimited Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz and 40 MHz bandwidth modes. (Date of Grant: 08/29/2016) Class II Permissive Change: This C2PC is to add this module to a portable host: Notebook Computer (Model: TP00080B/ Brand: Lenovo). The highest reported SAR is 0.89 W/kg.
variousLimited Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations with respect to 2.1093 and different antenna configurations. Class II Permissive Change to add tablet computer (Model: TP00078B/Brand: Lenovo) application. SAR compliance for portable use condition has been evaluated as described in this filing. This device must not be collocated with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. The highest reported body SAR and simultaneous transmission conditions are < 0.1 W/kg.
variousLimited Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations with respect to 2.1093 and different antenna configurations. This device has 20, and 40 MHz bandwidth modes. Class II Permissive Change to add tablet computer (Model: TP00078B/Brand: Lenovo) application. SAR compliance for portable use condition has been evaluated as described in this filing. This device must not be collocated with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. The highest reported body SAR and simultaneous transmission conditions are 0.44 W/kg and 0.22W/kg, respectively.
variousLimited Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations with respect to 2.1093 and different antenna configurations. This device has 20, 40, and 80 MHz bandwidth modes. Class II Permissive Change to add tablet computer (Model: TP00078B/Brand: Lenovo) application. SAR compliance for portable use condition has been evaluated as described in this filing. This device must not be collocated with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. The highest reported body SAR and simultaneous transmission conditions are 0.63 W/kg and 0.28W/kg, respectively.
variousLimited Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations with respect to 2.1093 and different antenna configurations. This device has 20, 40, and 80 MHz bandwidth modes. Class II Permissive Change to add portable applications. SAR compliance for body-worn operating configurations is limited to applications that cause the device to operate with the minimum separation distance of 0.5-cm from any person, as described in this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. This device must not be collocated with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. The highest reported SAR for body and simultaneous transmission conditions are 0.79/kg and 1.51 W/kg, respectively.
variousLimited Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations with respect to 2.1093 and different antenna configurations. Class II Permissive Change to add portable applications. SAR compliance for body-worn operating configurations is limited to applications that cause the device to operate with the minimum separation distance of 0.5-cm from any person, as described in this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. This device must not be collocated with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. The highest reported SAR for body and simultaneous transmission conditions are <0.10 /kg and 0.88 W/kg, respectively
variousLimited Single Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz and 40 MHz bandwidth modes. Class II Permissive Change to add portable applications. SAR compliance for body-worn operating configurations is limited to applications that cause the device to operate with the minimum separation distance of 0.5-cm from any person, as described in this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. This device must not be collocated with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. The highest reported SAR for body and simultaneous transmission conditions are 0.75/kg and 1.51 W/kg, respectively.
variousSingle Modular Approval. Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 MHz and 40 MHz bandwidth modes.
variousSingle Modular Approval. Power listed is maximum conducted. This module is restricted to installation in products for use only in mobile and fixed applications for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.
variousIs there an equipment authorization waiver associated with this application?No
variousIf there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
various Firm Name BTL Inc.
various Compliance Certification Services Inc. Wugu Lab.
various Sporton International Inc.
various Bureau Veritas CPS(H.K.) Ltd., Taoyuan Branch
various SPORTON International Inc.
various SGS Taiwan Ltd.
various SGS Taiwan Ltd. Electronics & Communication Lab
various DEKRA TESTING AND CERTIFICATION CO., LTD. LinKou
various DEKRA Testing and Certification Co., Ltd.
various SGS Korea Co., Ltd
various SGS TAIWAN LTD.
various Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch
various Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch
various Name S****** H****
various H******** L****
various A******** C********
various A**** C******
various E**** L********
various S******** J******
various R******** W****
various W****** C****
various S**** H****
various K******** L****
various J****** C****
various N**** B******
various R****** C****
various Telephone Number +86-7******** Extension:
various 886-2******** Extension:
various 88633********
various 886-3********
various +886-********
various 886-3******** Extension:
various 886-3******** Extension:
various +886-******** Extension:
various 886-2******** Extension:
various 86-76******** Extension:
various +886-******** Extension:
various +886-******** Extension:
various 886-2******** Extension:
various 82-31********
various 886-2******** Extension:
various 886-3******** Extension:
various Fax Number +886-********
various +886-********
various +886-********
various 886-3********
various 886-3********
various +886-********
various +886-********
various 86-76********
various +886-********
various +886-********
various 886-2********
various +82-3********
various 886-2********
various 886-3********
various +886-********
various E-mail S******@newbtl.com
various h******@sgs.com
various a******@sporton.com.tw
various e******@tw.bureauveritas.com
various s******@sporton.com.tw
various R******@sgs.com
various w******@sgs.com
various s******@newbtl.com
various s******@dekra.com
various k******@tw.bureauveritas.com
various s******@quietek.com
various K******@sgs.com
various n******@sgs.com
various r******@tw.bureauveritas.com
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 15E CC MO 5180 5240 0.106
1 2 15E CC MO ND 5260 5320 0.135
1 3 15E CC MO ND 5500 5720 0.129
1 4 15E CC MO 5745 5825 0.129
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 15C CC 2402 2480 0.004
2 2 15C CC MO 2412 2472 0.204
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 15C CC 2402.00000000 2480.00000000 0.0040000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
4 1 15C CC 2402 2480 0.004
4 2 15C CC MO 2412 2472 0.204
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
5 1 15E CC MO 5180 5240 0.106
5 2 15E CC MO ND 5260 5320 0.135
5 3 15E CC MO ND 5500 5720 0.129
5 4 15E CC MO 5745 5825 0.129
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
6 1 15C CC 2402.00000000 2480.00000000 0.0040000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
7 1 15C CC 2402 2480 0.004
7 2 15C CC MO 2412 2472 0.204
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
8 1 15E CC MO 5180 5240 0.106
8 2 15E CC MO 5260 5320 0.135
8 3 15E CC MO 5500 5720 0.129
8 4 15E CC MO 5745 5825 0.129
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
9 1 15C CC 2402.00000000 2480.00000000 0.0040000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
10 1 15C CC 2402 2480 0.004
10 2 15C CC MO 2412 2472 0.204
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
11 1 15C CC 2402.00000000 2480.00000000 0.0040000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
12 1 15E CC MO 5180 5240 0.106
12 2 15E CC MO 5260 5320 0.135
12 3 15E CC MO 5500 5720 0.129
12 4 15E CC MO 5745 5825 0.129
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
13 1 15E CC MO 5180 5240 0.106
13 2 15E CC MO 5260 5320 0.135
13 3 15E CC MO 5500 5720 0.129
13 4 15E CC MO 5745 5825 0.129
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
14 1 15C CC 2402.00000000 2480.00000000 0.0040000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
15 1 15C CC 2402 2480 0.004
15 2 15C CC MO 2412 2472 0.204
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
16 1 15E CC MO 5180 5240 0.106
16 2 15E CC MO 5260 5320 0.135
16 3 15E CC MO 5500 5720 0.129
16 4 15E CC MO 5745 5825 0.129
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
17 1 15C CC 2402 2480 0.004
17 2 15C CC MO 2412 2472 0.204
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
18 1 15C CC 2402.00000000 2480.00000000 0.0040000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
19 1 15E 38 CC MO 5180 5240 0.106
19 2 15E 38 CC MO ND 5260 5320 0.135
19 3 15E 38 CC MO ND 5500 5720 0.129
19 4 15E 38 CC MO 5745 5825 0.129
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
20 1 15C CC 2402 2480 0.004
20 2 15C CC MO 2412 2472 0.204
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
21 1 15C CC 2402.00000000 2480.00000000 0.0040000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
22 1 15E CC MO 5180 5240 0.106
22 2 15E CC MO 5260 5320 0.135
22 3 15E CC MO 5500 5720 0.129
22 4 15E CC MO 5745 5825 0.129
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
23 1 15C CC 2402 2480 0.004
23 2 15C CC MO 2412 2472 0.204
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
24 1 15C CC 2402.00000000 2480.00000000 0.0040000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
25 1 15C CC 2402.00000000 2480.00000000 0.0040000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
26 1 15E CC MO 5180 5240 0.106
26 2 15E CC MO 5260 5320 0.135
26 3 15E CC MO 5500 5720 0.129
26 4 15E CC MO 5745 5825 0.129
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
27 1 15C CC 2402 2480 0.004
27 2 15C CC MO 2412 2472 0.204
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
28 1 15E CC MO 5180 5240 0.106
28 2 15E CC MO 5260 5320 0.135
28 3 15E CC MO 5500 5720 0.129
28 4 15E CC MO 5745 5825 0.129
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
29 1 15C CC 2402 2480 0.004
29 2 15C CC MO 2412 2472 0.204
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
30 1 15C CC 2402.00000000 2480.00000000 0.0040000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
31 1 15C CC 2402.00000000 2480.00000000 0.0040000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
32 1 15C CC 2402 2480 0.004
32 2 15C CC MO 2412 2472 0.204
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
33 1 15E CC MO 5180 5240 0.106
33 2 15E CC MO 5260 5320 0.135
33 3 15E CC MO 5500 5720 0.129
33 4 15E CC MO 5745 5825 0.129
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
34 1 15C CC 2402 2480 0.004
34 2 15C CC MO 2412 2472 0.204
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
35 1 15C CC 2402.00000000 2480.00000000 0.0040000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
36 1 15E 38 CC MO 5180 5240 0.106
36 2 15E 38 CC MO ND 5260 5320 0.135
36 3 15E 38 CC MO ND 5500 5720 0.129
36 4 15E 38 CC MO 5745 5825 0.129
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
37 1 15C CC 2402.00000000 2480.00000000 0.0040000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
38 1 15E CC MO 5180 5240 0.106
38 2 15E CC MO 5260 5320 0.135
38 3 15E CC MO 5500 5720 0.129
38 4 15E CC MO 5745 5825 0.129
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
39 1 15C CC 2402 2480 0.004
39 2 15C CC MO 2412 2472 0.204
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
40 1 15E CC MO 5180 5240 0.106
40 2 15E CC MO 5260 5320 0.135
40 3 15E CC MO 5500 5720 0.129
40 4 15E CC MO 5745 5825 0.129
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
41 1 15C CC 2402 2480 0.004
41 2 15C CC MO 2412 2472 0.204
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
42 1 15C CC 2402.00000000 2480.00000000 0.0040000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
43 1 15C CC 2402 2480 0.004
43 2 15C CC MO 2412 2472 0.204
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
44 1 15E CC MO 5180 5240 0.106
44 2 15E CC MO 5260 5320 0.135
44 3 15E CC MO 5500 5720 0.129
44 4 15E CC MO 5745 5825 0.129
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
45 1 15C CC 2402.00000000 2480.00000000 0.0040000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
46 1 15C CC 2402.00000000 2480.00000000 0.0040000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
47 1 15E CC MO 5180 5240 0.106
47 2 15E CC MO 5260 5320 0.135
47 3 15E CC MO 5500 5720 0.129
47 4 15E CC MO 5745 5825 0.129
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
48 1 15C CC 2402 2480 0.004
48 2 15C CC MO 2412 2472 0.204
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
49 1 15E CC MO 5180 5240 0.106
49 2 15E CC MO 5260 5320 0.135
49 3 15E CC MO 5500 5720 0.129
49 4 15E CC MO 5745 5825 0.129
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
50 1 15C CC 2402 2480 0.004
50 2 15C CC MO 2412 2472 0.204
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
51 1 15C CC 2402.00000000 2480.00000000 0.0040000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
52 1 15E CC MO 5180 5240 0.106
52 2 15E CC MO 5260 5320 0.135
52 3 15E CC MO 5500 5720 0.129
52 4 15E CC MO 5745 5825 0.129
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
53 1 15C CC 2402.00000000 2480.00000000 0.0040000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
54 1 15C CC 2402 2480 0.004
54 2 15C CC MO 2412 2472 0.204
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
55 1 15E CC MO 5180 5240 0.106
55 2 15E CC MO 5260 5320 0.135
55 3 15E CC MO 5500 5720 0.129
55 4 15E CC MO 5745 5825 0.129
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
56 1 15C CC 2402.00000000 2480.00000000 0.0040000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
57 1 15C CC 2402 2480 0.004
57 2 15C CC MO 2412 2472 0.204
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
58 1 15C CC 2402 2480 0.004
58 2 15C CC MO 2412 2472 0.204
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
59 1 15E CC MO 5180 5240 0.106
59 2 15E CC MO 5260 5320 0.135
59 3 15E CC MO 5500 5720 0.129
59 4 15E CC MO 5745 5825 0.129
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
60 1 15C CC 2402.00000000 2480.00000000 0.0040000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
61 1 15C CC 2402.00000000 2480.00000000 0.0040000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
62 1 15E 38 CC MO 5180 5240 0.106
62 2 15E 38 CC MO ND 5260 5320 0.135
62 3 15E 38 CC MO ND 5500 5720 0.129
62 4 15E 38 CC MO 5745 5825 0.129
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
63 1 15C CC 2402 2480 0.004
63 2 15C CC MO 2412 2472 0.204
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
64 1 15E CC MO 5180 5240 0.106
64 2 15E CC MO 5260 5320 0.135
64 3 15E CC MO 5500 5720 0.129
64 4 15E CC MO 5745 5825 0.129
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
65 1 15C CC 2402.00000000 2480.00000000 0.0040000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
66 1 15C CC 2402 2480 0.004
66 2 15C CC MO 2412 2472 0.204
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
67 1 15C CC 2402.00000000 2480.00000000 0.0040000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
68 1 15E CC MO 5180 5240 0.106
68 2 15E CC MO 5260 5320 0.135
68 3 15E CC MO 5500 5720 0.129
68 4 15E CC MO 5745 5825 0.129
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
69 1 15C CC 2402 2480 0.004
69 2 15C CC MO 2412 2472 0.204
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
70 1 15E CC MO 5180 5240 0.106
70 2 15E CC MO 5260 5320 0.135
70 3 15E CC MO 5500 5720 0.129
70 4 15E CC MO 5745 5825 0.129
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
71 1 15C CC 2402 2480 0.004
71 2 15C CC MO 2412 2472 0.204
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
72 1 15C CC 2402.00000000 2480.00000000 0.0040000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
73 1 15C CC 2402 2480 0.004
73 2 15C CC MO 2412 2472 0.204
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
74 1 15C CC 2402.00000000 2480.00000000 0.0040000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
75 1 15E CC MO 5180 5240 0.106
75 2 15E CC MO 5260 5320 0.135
75 3 15E CC MO 5500 5720 0.129
75 4 15E CC MO 5745 5825 0.129
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
76 1 15C CC 2402.00000000 2480.00000000 0.0040000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
77 1 15C CC 2402 2480 0.004
77 2 15C CC MO 2412 2472 0.204
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
78 1 15E 38 CC MO 5180 5240 0.106
78 2 15E 38 CC MO ND 5260 5320 0.135
78 3 15E 38 CC MO ND 5500 5720 0.129
78 4 15E 38 CC MO 5745 5825 0.129
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
79 1 15C CC 2402.00000000 2480.00000000 0.0040000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
80 1 15E CC MO 5180 5240 0.106
80 2 15E CC MO 5260 5320 0.135
80 3 15E CC MO 5500 5720 0.129
80 4 15E CC MO 5745 5825 0.129
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
81 1 15C CC 2402 2480 0.004
81 2 15C CC MO 2412 2472 0.204
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
82 1 15C CC 2402.00000000 2480.00000000 0.0040000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
83 1 15C CC 2402.00000000 2480.00000000 0.0040000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
84 1 15E CC MO 5180 5240 0.106
84 2 15E CC MO ND 5260 5320 0.135
84 3 15E CC MO ND 5500 5700 0.129
84 4 15E CC MO 5745 5825 0.129
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
85 1 15C CC 2402 2480 0.004
85 2 15C CC MO 2412 2472 0.204
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
86 1 15C CC 2402 2480 0.004
86 2 15C CC MO 2412 2472 0.204
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
87 1 15E CC MO 5180 5240 0.106
87 2 15E CC MO ND 5260 5320 0.135
87 3 15E CC MO ND 5500 5700 0.129
87 4 15E CC MO 5745 5825 0.129
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
88 1 15C CC 2402 2480 0.004
88 2 15C CC MO 2412 2472 0.204
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
89 1 15E CC MO 5180 5240 0.106
89 2 15E CC MO ND 5260 5320 0.135
89 3 15E CC MO ND 5500 5700 0.129
89 4 15E CC MO 5745 5825 0.129
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
90 1 15C CC 2402.00000000 2480.00000000 0.0040000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
91 1 15C CC 2402 2480 0.004
91 2 15C CC MO 2412 2472 0.204
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
92 1 15C CC 2402.00000000 2480.00000000 0.0040000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
93 1 15E 38 CC MO 5180 5240 0.106
93 2 15E 38 CC MO 5260 5320 0.135
93 3 15E 38 CC MO 5500 5720 0.129
93 4 15E 38 CC MO 5745 5825 0.129
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
94 1 15E CC MO 5180 5240 0.106
94 2 15E CC MO 5260 5320 0.135
94 3 15E CC MO 5500 5720 0.129
94 4 15E CC MO 5745 5825 0.129
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
95 1 15C CC 2402.00000000 2480.00000000 0.0040000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
96 1 15C CC 2402 2480 0.004
96 2 15C CC MO 2412 2472 0.204
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
97 1 15C CC 2402 2480 0.002
97 2 15C CC MO 2412 2472 0.053
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
98 1 15E CC MO 5180 5240 0.048
98 2 15E CC MO 5260 5320 0.049
98 3 15E CC MO 5500 5720 0.031
98 4 15E CC MO 5745 5825 0.035
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
99 1 15C CC 2402.00000000 2480.00000000 0.0030000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
100 1 15E CC MO 5180 5240 0.106
100 2 15E CC MO 5260 5320 0.135
100 3 15E CC MO 5500 5720 0.129
100 4 15E CC MO 5745 5825 0.129
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
101 1 15C CC 2402.00000000 2480.00000000 0.0040000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
102 1 15C CC 2402 2480 0.004
102 2 15C CC MO 2412 2472 0.204
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
103 1 15C CC 2402 2480 0.004
103 2 15C CC MO 2412 2472 0.204
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
104 1 15E 38 CC MO 5180 5240 0.106
104 2 15E 38 CC MO 5260 5320 0.135
104 3 15E 38 CC MO 5500 5720 0.129
104 4 15E 38 CC MO 5745 5825 0.129
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
105 1 15C CC 2402.00000000 2480.00000000 0.0040000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
106 1 15E 38 CC MO 5180 5240 0.106
106 2 15E 38 CC MO 5260 5320 0.135
106 3 15E 38 CC MO 5500 5720 0.129
106 4 15E 38 CC MO 5745 5825 0.129
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
107 1 15C CC 2402.00000000 2480.00000000 0.0040000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
108 1 15C CC 2402 2480 0.004
108 2 15C CC MO 2412 2472 0.204
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
109 1 15C CC 2402.00000000 2480.00000000 0.0040000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
110 1 15E 38 CC MO 5180.00000000 5240.00000000 0.1060000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
111 1 15C CC 2402 2480 0.004
111 2 15C CC MO 2412 2472 0.204
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
112 1 15C CC 2402.00000000 2480.00000000 0.0040000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
113 1 15E CC MO 5180 5240 0.106
113 2 15E CC MO 5260 5320 0.135
113 3 15E CC MO 5500 5720 0.129
113 4 15E CC MO 5745 5825 0.129
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
114 1 15C CC 2402 2480 0.004
114 2 15C CC MO 2412 2472 0.204
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
115 1 15C CC 2402.00000000 2480.00000000 0.0040000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
116 1 15C CC 2402 2480 0.004
116 2 15C CC MO 2412 2472 0.204
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
117 1 15E CC MO 5180 5240 0.106
117 2 15E CC MO 5260 5320 0.135
117 3 15E CC MO 5500 5720 0.129
117 4 15E CC MO 5745 5825 0.129
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
118 1 15C CC 2402.00000000 2480.00000000 0.0040000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
119 1 15C CC 2402 2480 0.004
119 2 15C CC MO 2412 2472 0.204
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
120 1 15E CC MO 5180 5240 0.106
120 2 15E CC MO 5260 5320 0.135
120 3 15E CC MO 5500 5720 0.129
120 4 15E CC MO 5745 5825 0.129
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
121 1 15C CC 2402.00000000 2480.00000000 0.0040000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
122 1 15C CC 2402 2480 0.004
122 2 15C CC MO 2412 2472 0.204
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
123 1 15E CC MO 5150 5240 0.106
123 2 15E CC MO 5260 5320 0.135
123 3 15E CC MO 5500 5720 0.129
123 4 15E CC MO 5745 5825 0.129
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
124 1 15C CC 2402.00000000 2480.00000000 0.0040000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
125 1 15C CC 2402 2480 0.004
125 2 15C CC MO 2412 2472 0.204
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
126 1 15C CC 2402.00000000 2480.00000000 0.0040000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
127 1 15C CC 2402 2480 0.004
127 2 15C CC MO 2412 2472 0.204
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
128 1 15E CC MO 5180 5240 0.106
128 2 15E CC MO 5260 5320 0.135
128 3 15E CC MO 5500 5720 0.129
128 4 15E CC MO 5745 5825 0.129
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
129 1 15E CC MO 5150 5240 0.106
129 2 15E CC MO 5260 5320 0.135
129 3 15E CC MO 5500 5720 0.129
129 4 15E CC MO 5745 5825 0.129
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
130 1 15E 38 CC MO 5180 5240 0.106
130 2 15E 38 CC MO 5260 5320 0.135
130 3 15E 38 CC MO 5500 5720 0.129
130 4 15E 38 CC MO 5745 5825 0.129
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
131 1 15C CC MO 2402 2480 0.004
131 2 15C CC MO 2412 2472 0.204
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
132 1 15C CC 2402.00000000 2480.00000000 0.0040000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
133 1 15C CC 2402.00000000 2480.00000000 0.0040000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
134 1 15C CC 2402 2480 0.004
134 2 15C CC MO 2412 2472 0.204
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
135 1 15E 38 CC MO 5150 5240 0.106
135 2 15E 38 CC MO 5260 5320 0.135
135 3 15E 38 CC MO 5500 5720 0.129
135 4 15E 38 CC MO 5745 5825 0.129
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
136 1 15C CC 2402 2480 0.004
136 2 15C CC MO 2412 2472 0.204
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
137 1 15E 38 CC MO 5180 5240 0.106
137 2 15E 38 CC MO ND 5260 5320 0.135
137 3 15E 38 CC MO ND 5500 5720 0.129
137 4 15E 38 CC MO 5745 5825 0.129
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
138 1 15C CC 2402.00000000 2480.00000000 0.0040000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
139 1 15E 38 CC MO 5180 5240 0.106
139 2 15E 38 CC MO 5260 5320 0.135
139 3 15E 38 CC MO 5500 5720 0.129
139 4 15E 49 CC MO 5745 5825 0.129
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
140 1 15C CC 2402.00000000 2480.00000000 0.0040000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
141 1 15C CC 2402 2480 0.004
141 2 15C CC MO 2412 2472 0.204
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
142 1 15C CC 2402.00000000 2480.00000000 0.0040000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
143 1 15E 38 CC MO 5180 5240 0.106
143 2 15E 38 CC MO 5260 5320 0.135
143 3 15E 38 CC MO 5500 5720 0.129
143 4 15E 38 CC MO 5745 5825 0.129
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
144 1 15C CC 2402 2480 0.004
144 2 15C CC MO 2412 2472 0.204
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
145 1 15C CC MO 2402 2480 0.004
145 2 15C CC MO 2412 2472 0.204
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
146 1 15C CC 2402.00000000 2480.00000000 0.0040000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
147 1 15E 38 CC MO 5180 5240 0.106
147 2 15E 38 CC MO 5260 5320 0.135
147 3 15E 38 CC MO 5500 5720 0.129
147 4 15E 38 CC MO 5745 5825 0.129
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
148 1 15C 2402.00000000 2480.00000000 0.0040000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
149 1 15C CC MO 2402 2480 0.004
149 2 15C CC MO 2412 2472 0.204
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
150 1 15E 38 CC MO 5180 5240 0.106
150 2 15E 38 CC MO 5260 5320 0.135
150 3 15E 38 CC MO 5500 5720 0.129
150 4 15E 38 CC MO 5745 5825 0.129
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
151 1 15E 38 CC MO 5180 5240 0.106
151 2 15E 38 CC MO 5260 5320 0.135
151 3 15E 38 CC MO 5500 5720 0.129
151 4 15E 38 CC MO 5745 5825 0.129
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
152 1 15C CC 2402.00000000 2480.00000000 0.0040000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
153 1 15C CC 2402 2480 0.004
153 2 15C CC MO 2412 2472 0.204
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
154 1 15E 38 CC MO 5180 5240 0.106
154 2 15E 38 CC MO 5260 5320 0.135
154 3 15E 38 CC MO 5500 5720 0.129
154 4 15E 38 CC MO 5745 5825 0.129
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
155 1 15C CC 2402 2480 0.004
155 2 15C CC MO 2412 2472 0.204
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
156 1 15C CC 2402.00000000 2480.00000000 0.0040000

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC