companies    

FCC ID: TX2-RTL8192CE Realtek RTL8192CE PCI-Express miniCard

by: Realtek Semiconductor Corp. latest update: 2012-08-01 model: RTL8192CE

Three grants have been issued under this FCC ID from 06/07/2010 to 08/01/2012 (this is one of seventeen releases in 2012 for this grantee). Public details available include frequency information, manuals, and internal & external photos. some products also feature user submitted or linked drivers, troubleshooting guides, instructions, warrantee terms, & password defaults.
permalink for this FCC identifier
search for: Repair details
from iFixIt
 Replacement
on Amazon
 Trade-in? Recycling locations
eg is reader-supported. when you buy through links on our site, we may earn an affiliate commission.
|
|
|   
eg for Slack usage
all frequencies exhibits applications
manual photos label
app s submitted / available
1 2 3 User Manual Users Manual pdf 205.45 KiB July 06 2010 / April 12 2010
1 2 3 Internal Photos Internal Photos pdf 530.01 KiB August 23 2010
1 2 3 External Photos External Photos pdf 472.01 KiB July 06 2010 / April 12 2010
1 2 3 Label Description ID Label/Location Info pdf 583.27 KiB July 06 2010
1 2 3 Authorization Letter Cover Letter(s) pdf 85.00 KiB / January 08 2012
1 2 3 Permissive Change Letter Cover Letter(s) pdf 71.75 KiB / January 08 2012
1 2 3
Test Report pdf January 08 2012
1 2 3
Test Report pdf August 01 2012
1 2 3
Test Setup Photos pdf / January 08 2012
1 2 3 Class II Letter Cover Letter(s) pdf 118.29 KiB August 23 2010
1 2 3 Parts List I Parts List/Tune Up Info pdf August 23 2010 confidential
1 2 3 Parts List II Parts List/Tune Up Info pdf August 23 2010 confidential
1 2 3 Power of Attorney Letter Cover Letter(s) pdf 98.14 KiB August 23 2010
1 2 3 Request for Confidentiality Cover Letter(s) pdf 44.15 KiB August 23 2010
1 2 3
Test Report pdf August 23 2010
1 2 3
Test Report pdf July 06 2010
1 2 3 Block Diagram Block Diagram pdf June 07 2010 confidential
1 2 3 DOC Attestation Letter Cover Letter(s) pdf 18.74 KiB July 06 2010
1 2 3 LMA Letter Cover Letter(s) pdf 29.35 KiB July 06 2010
1 2 3
RF Exposure Info pdf July 06 2010
1 2 3 Operational Description Operational Description pdf June 07 2010 confidential
1 2 3 Schematics Schematics pdf June 07 2010 confidential
1 2 3 User Manual Users Manual pdf 205.45 KiB July 06 2010 / April 12 2010
1 2 3 Internal Photos Internal Photos pdf 530.01 KiB August 23 2010
1 2 3 External Photos External Photos pdf 472.01 KiB July 06 2010 / April 12 2010
1 2 3 Label Description ID Label/Location Info pdf 583.27 KiB July 06 2010
1 2 3 Authorization Letter Cover Letter(s) pdf 85.00 KiB / January 08 2012
1 2 3 Permissive Change Letter Cover Letter(s) pdf 71.75 KiB / January 08 2012
1 2 3 Class II Letter Cover Letter(s) pdf 118.29 KiB August 23 2010
1 2 3 Power of Attorney Letter Cover Letter(s) pdf 98.14 KiB August 23 2010
1 2 3 Request for Confidentiality Cover Letter(s) pdf 44.15 KiB August 23 2010
1 2 3 DOC Attestation Letter Cover Letter(s) pdf 18.74 KiB July 06 2010
1 2 3 LMA Letter Cover Letter(s) pdf 29.35 KiB July 06 2010

frequency equipment class purpose
1 2012-08-01 2412 ~ 2462 DTS - Digital Transmission System Class II Permissive Change
2 2010-08-23 2412 ~ 2462 DTS - Digital Transmission System
3 2010-06-07 2412 ~ 2462 DTS - Digital Transmission System Original Equipment

Application Forms

app s Applicant Information
1 2 3 Effective 2012-08-01
1 2 3 2010-08-23
1 2 3 2010-06-07
1 2 3 Applicant's complete, legal business name Realtek Semiconductor Corp.
1 2 3 FCC Registration Number (FRN) 0020109807
1 2 3 Physical Address No. 2 Innovation Road II, Hsinchu Science Park
1 2 3 No. 2
1 2 3 Hsinchu, N/A
1 2 3 Hsinchu
1 2 3 Taiwan
app s TCB Information
1 2 3 TCB Application Email Address h******@acbcert.com
1 2 3 B******@phoenix-testlab.de
1 2 3 TCB Scope A4: UNII devices & low power transmitters using spread spectrum techniques
app s FCC ID
1 2 3 Grantee Code TX2
1 2 3 Equipment Product Code RTL8192CE
app s Person at the applicant's address to receive grant or for contact
1 2 3 Name D******** L******
1 2 3 Title Project Manager
1 2 3 Telephone Number 886-3******** Extension:
1 2 3 Fax Number 886-3********
1 2 3 E-mail d******@realtek.com
app s Technical Contact
1 2 3 Firm Name SGS North America
1 2 3 Name D****** S******
1 2 3 Physical Address 620 Old Peachtree Rd NW
1 2 3 Suwannee, 30024
1 2 3 United States
1 2 3 Telephone Number 67882********
1 2 3 Fax Number 67882********
1 2 3 E-mail d******@sgs.com
app s Non Technical Contact
n/a
app s Confidentiality (long or short term)
1 2 3 Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:No
1 2 3 Yes
1 2 3 Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:No
1 2 3 Yes
1 2 3 If so, specify the short-term confidentiality release date (MM/DD/YYYY format)12/04/2010
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
1 2 3 Is this application for software defined/cognitive radio authorization?No
1 2 3 Equipment ClassDTS - Digital Transmission System
1 2 3 Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)802.11b/g/n RTL8192CE miniCard
1 2 3 Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?No
1 2 3 Modular Equipment TypeLimited Single Modular Approval
1 2 3 Purpose / Application is forClass II Permissive Change
1 2 3 Original Equipment
1 2 3 Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?No
1 2 3 Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
1 2 3 Grant CommentsClass II Permissive Change to cover second source parts as documented in the filing. Power listed is the maximum combined conducted output power as indicated in the filing. Device is operating in a 2T2R / 1T2R Spatial Multiplexing MIMO configuration as described in this filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz. Approval is limited to OEM installation only, and the host in which this module is integrated should provide stable 3.3 VDC power to this module through regulator circuit. Highest reported SAR value is < 0.01W/kg. This Class II Permissive Change is to allow collocation of this module with the end user in a netbook computer platform with a separation distance of 136 mm or greater as shown in application under this FCC ID, simultaneous transmission with the GSM module is not allowed.
1 2 3 Class II Permissive Change to cover second source parts as documented in the filing. Power listed is the maximum combined conducted output power as indicated in the filing. Device is operating in a 2T2R / 1T2R Spatial Multiplexing MIMO configuration as described in this filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz. Approval is limited to OEM installation only, and the host in which this module is integrated should provide stable 3.3 VDC power to this module through regulator circuit.
1 2 3 Power listed is the maximum combined conducted output power as indicated in the filing. Device is operating in a 2T2R / 1T2R Spatial Multiplexing MIMO configuration as described in this filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz. Approval is limited to OEM installation only, and the host in which this module is integrated should provide stable 3.3 VDC power to this module through regulator circuit.
1 2 3 Is there an equipment authorization waiver associated with this application?No
1 2 3 If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
1 2 3 Firm Name SGS North America, Consumer Testing Services
1 2 3 Sporton International Inc.
1 2 3 Name D**** S******
1 2 3 A******** C****
1 2 3 Telephone Number 973-4********
1 2 3 886-3******** Extension:
1 2 3 Fax Number 973 5********
1 2 3 886-3********
1 2 3 E-mail d******@sgs.com
1 2 3 a******@sporton.com.tw
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 15C 2412 2462 0.0998
1 2 15C 2422 2452 0.097
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 15C 2412 2462 0.0998
2 2 15C 2422 2452 0.097
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 15C 2412 2462 0.0998
3 2 15C 2422 2452 0.097

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

potentially related items: TX2-RTL8187SE User Manual TX2-RTL8821AE User Manual 20150824 v1 - Regulatory Notice US&CA TX2-RTL8188CUS User Manual TX2-RTL8191SE (RTL8191SE) UserMan 0303 TX2-RTL8191SU manual
recent releases: 2A8DO-S650 Guangzhou Wesdar Electronic Technology Co.,Ltd 2A8EM-B751C Bigme Cloud Literacy Technology Co., Ltd. 2AV2J-DBPADGO1 Shenzhen Dangs Science and Technology Co., Ltd 2BAG8-AUTOPROX MAYTON 2A4WG-ZAT-G850A Shenzhen Zhuoaite Electronics Co., Ltd.

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC