FCC ID: 2AQOV-WIMUPRO WIMU PRO

U S E R M A N U A L Calle Guinea, 2 04009 ALMERA SPAIN T +34 950 272 379 info@realtracksystems.com http://www.realtracksystems.com WIMU are registered trademarks of Realtrack Systems 2018 all rights reserved Made in the EU All registered trademarks belong to their respective owners. C O N T E N T S INTRODUCTION 03 FUNCTIONS 04 SPECIFICATIONS 05 DISCLAIMER 06 DECLARATION OF CONFORMITY 07 CUSTOMER INFORMATION 09 Advanced technology for realtime physical activity monitoring Realtrack Systems has developed the leading wearable device system WIMU PRO to monitor every moment of your training sessions. Uniting ergonomics and performance to collect and trans-

mit instantly every conceivable metric and variable to maximize efciency and productivity during real time, training and coaching sessions, individual recovery & return to play management, tactical implementation, talent identication and deep dive data post session for your specialist teams to analyze and build their own database of individual and team parameters and history. Total data capture; Equiped with multiple sensors WIMU PRO captures and processes every indivi-

dual movement and positional change on the eld or court, with an inbuilt INTEL processor only WIMU PRO can guaranteeimmediate data ow using 3 independent wireless technologies. Intel Atom Inside 1GHz Hybrid Location System; GPS/GNSS 18Hz Precision Locator UWB <10cm 4 realtime monitors:

BLUETOOTH, BLE, ANT+, WIFI B/G/N

(HEART RATE, SMO2, EMG, ETC) 3 Level Inercial Sensors:

3D Accelerometer1000 Hz (400G) 3D Gyroscope 1000 Hz (8000/S) 3D Magnetometer (100Hz) OLED Screen (player ID) Standard USB portal Small and light I N T R O D U C T I O N 0 3 LED COLOR CHART STATE BLINKING

-Slow-

FLASHING

-Fast-

Booting Wimu Ready Logger GPS x / ANT+ Connect ON / OFF BUTTON ON / OFF BUTTON ON / OFF BUTTON Switch ON / OFF Switch ON / OFF BATTERY 1 2 3 4 STARTING PROCEDURE In 30 seconds, aprox. you will see a BLUE LED ashing, then a blue LED will ash quicker. That means that WIMU PRO is ready to be used. MICRO-USB MICRO-USB MICRO-USB CONNECTOR CONNECTOR CONNECTOR To charge the battery of the device from AC adapter and to load data 5 LOGGING To start collecting data, we have to press and hold the button for 1 second. Then a ashing is displayed followed for a red led blinking. Remember, the red led indicates the session is being recorded into the device WIMU PRO has to be fully charged before starting any activity. Be sure the red LED from the lateral is turn off

(it will indicate the battery is fully charge). If we start a session without the enough battery charge, we risk not recording the full session. SWITCH ON/OFF THE DEVICE PLACE OF WIMU PRO 6 Place the device into the sport vest as seeing in the picture 1. ON Press the button until a blue light ashes. Its recommended to place the device horizontally

(in the oor, i.e.) and away from vibrations during the rst 30 sec. its on. WIMU PRO uses this period of time to take references. 2. OFF Press the button 3 in quick sucession (less than 1 second) F U N C T I O N S 0 4 Technical Specications (WIMU) Cleaning Clean your device with a wet cloth, if necessary use a mild soap. Do not use gasoline, solvents, acetone, alcohol, repellents, paints or any other chemical products on the device.. Computer interface wireless, micro-USB Maximal Output RF Power 12,5 dBm. Protocol WiFi 802.11 b/g/n, Bluetooth, ANT+

Data Storage 16 GB Battery type Lithium-ion, [1300,1800] mAh Charge Micro-USB AC adapter Charge time < 3 h Autonomy transmitting > 3 h Autonomy in standby > 7 days Operating temperature from -20 to +55 C Maintenance Warning Use WIMU PRO only as directed in the user manual. Do not disassemble the device. Protect the device from possible damage, do not drop or expose to extreme heat of excessive sun exposure. Keep the device in a clean and dry place, at room temperature. -Avoid scratching the device. Please protect the Performance Sensors from water. S P E C I F I C A T I O N S 0 5 Maintenance Warning It is not a medical product. WIMU PRO must not be used as a substitute for obtai-

ning measurements that require professional precision or laboratory-quality mea-

surements. All training plans in WIMU PRO have been developed by professional and qualied trainers. However, they do not replace doctors advice. Warning Battery People who have a pacemaker, debrillator, or other implanted electronic devices use WIMU PRO at their own risk. Before starting using WIMU PRO, we recom-

mend an exercise test under a doctors supervision with WIMU PRO. Exercise may include some risk, especially for those who have been sedentary for a long period of time. We strongly advise you to get a medical check-out prior to beginning a regular exercise program. The equipment shall be powered by a limited power supply in compliance with clause 2.5 of Standard UNE-EN 60950-1 which meets SELV requirement. Please ensure that you follow the guidelines listed below. Failure to follow these guidelines may result in a shortened battery life span and/or result in damage to the WIMU PRO and possibly injury. If the WIMU PRO is to be stored for an extended period of time, please ensure that the product is kept within the following temperature range: from 5C to 25C. Do not operate the WIMU PRO outside the following temperature range:

from -20C to 55C. Do not puncture or incinerate the WIMU PRO. Batteries must be disposed of properly according to local laws and regulations. Do not disassemble. Do not expose to high temperatures. Do not dispose of your battery in a re. It is not possible to extract the battery used in WIMU devices. Due to its components, these batteries must be properly managed in order to avoid environmental damage. Thus, the whole device should be returned to RealTrack Systems S.L.

(C/Guinea, 2 - 04009 Almeria, Spain) for the correct waste management once it will no longer be used. For private households: Information on Disposal for Users of WEEE This symbol (gure 1) on the product(s) and / or accompanying docu-

ments means that used electrical and electronic equipment (WEEE) should not be mixed with general household waste. For proper treatment, recovery and recycling, please take this product(s) to designated collec-

tion points where it will be accepted free of charge. Alternatively, in some countries, you may be able to return your products to your local retailer upon purchase of an equivalent new product. Disposing of this product correctly will help save valuable resources and prevent any potential nega-

tive effects on human health and the environment, which could otherwise arise from inappropriate waste handling. Please contact your local authori-

ty for further details of your nearest designated collection point. Penalties may be applicable for incorrect disposal of this waste, in accordance with you national legislation. Figure 1. WEEE Symbol Crossed out wheeled bin For professional users in the European Union If you wish to discard electrical and electronic equipment (EEE), please contact your dealer or supplier for further information. For disposal in countries outside of the European Union This symbol is only valid in the European Union (EU). If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal. D I S C L A I M E R 0 6 Declaration of conformity Hereby, Realtrack Systems declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. To view the full Declaration of Conformity, see the Realtrack Systems Web Site for your WIMU PRO product:

www.realtracksystems.com/certicates/conformity.pdf CE Compliant This product complies with the Directive on Electromagnetic Compatibility and with the Low Voltage Directive. Regulatory Information FCC Changes or modications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with part 15 of the FCC Rules. Opera-

tion is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF exposure safety This device complies with the FCC RF exposure limits and has been evaluated in compliance with portable exposure condition. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specic Absorption Rate, or SAR. This device has been shown to be capable of compliance for locali-

zed SAR for uncontrolled environment/general population exposure limits specied in ANSI/IEEE Std. C95.1-1992 and has been tested in accordance with the measurement procedures specied in FCC RF Exposure guidelines and IEEE Std. 1528-2013. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The standard incorporates a substantial margin of safety to give additional protec-

tion for the public and to account for any variations. There is no limitation as to which distance can be used from the human body. Class B device notice Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equip-

ment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. D E C L A R A T I O N O F C O N F O R M I T Y 0 7 Regulatory Information ISED Changes or modications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with ISED license-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF exposure safety This device complies with the ISED RF exposure limits and has been evaluated in compliance with portable exposure condition. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specic Absorption Rate, or SAR. This device has been shown to be capable of compliance for localized SAR for uncontrolled environment/general population exposure limits specied in ANSI/IEEE Std. C95.1-1992 and has been tested in accordance with the measurement procedures specied in ISED RSS-102 and IEEE Std. 1528-2013. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations. There is no limitation as to which distance can be used from the human body. CAN ICES-003 (B) This Class B digital apparatus complies with Canadian ICES-003. D E C L A R A T I O N O F C O N F O R M I T Y 0 8 RMA (Return Merchandise Authorization) and DOA (Defective on Arrival) Processes 5. Returns must be made with full original packaging and with all elements of the complete package. Without exception, the RMA received without all items in mint condition will not be processed. When requesting a RMA or a DOA to RealTrack Systems, you accept the following conditions:

All submissions must be properly packaged to prevent damage during shipment. RealTrack Systems is not responsible for items that are misdirected, lost or dama-

ged in shipment. Any RMA service out under warranty will not extend the warranty of the product nor create any new warranty. It is your responsibility to back up all data on a hard drive before shipping the product to RealTrack Systems, which is not responsible for any data that is lost during the diagnostic process. I. Terms for Return 1. Each return material requests must be made by email or through the RMA form provided in RMA@realtracksystems.com 2. The material can only be returned when previously the Customer Service gene-

rated a valid RMA number. After RMA request has been conrmed by a represen-

tative RealTrack Systems, you will receive an email response with your RMA number and any other information you may need to know about your request for RMA, including the return address, the guidelines required documents such as the invoice and packing list, etc. If your purchase is out of Spain, follow the guidelines will be given, preparing INVOICE AND PACKING LIST so that it can carry out the customs clearance and list your RMA number legibly on these documents. If delivered via international carriers like FedEx or DHL, specify "RETURN FOR REPAIR. NO COMMERCIAL VALUE. VALUE FOR CUSTOMS PURPOSES ONLY." in carrier's shipping docu-

ments. 3. The RMA number is valid only 10 working days from the date of creation of that number by the Customer Service, hence the product must be returned to Real-

Track Systems during that time period. 4. Only you can return the equipment that was purchased in RealTrack Systems. Verication is based on the serial numbers, as the date and the invoice number or any other related documents needed for proper verication. Our warranty does not cover physical damage, misuse of the product and natural disasters. 6. Do not write on the original packaging: the RMA number must be visible on the shipping label. 7. Products will not be accepted under the following circumstances:

If the product is returned without any of the components of the original sent or that these are not in perfect condition. If the reason / s for returning the product does not correspond to what had been stated in the request for RMA. If the product is damaged somehow. If no valid RMA number visible on the label sent. If a product is returned as DOA tested and shown to be fully functional. f the product is received after 10 days from the shipping date RMA number, whichever period expires, you must start the process. If the product is not returned in its original packaging or packaging. 8. The customer is ultimately responsible for the condition of the returned item. This policy shall be communicated in turn to end customers (end-user). 9. Products that are obsolete or discontinued by the manufacturer can not be returned. RealTrack Systems not accept the return of loose accessories, software or service contracts (agreements). 10. In cases where a replacement material is needed and the RMA accepted and valid standards action will be taken for shipments. RealTrack Systems will take care of this process as well as its cost. Note: Under customer demand urgent deliveries can be made with the possible increase in costs for which the customer will pay.

* Shipping and processing costs:

In Warranty products: Any products returned as DOA and then RMA is not defecti-

ve will be returned and the shipping fee will be paid by the customer. C U S T O M E R I N F O R M A T I O N 0 9 Out of Warranty Products: RealTrack Systems reserves the right to refuse the repair of a product whose warranty has expired or canceled. In the event that a non-warranty repair is required, the client must pay for the spare parts, processing fees, and shipping costs for sending the product to and from RealTrack Systems. II. Reasons for Return 1. DOA (defect origin Deal on Arrival) The DOA issues must be reported within 5 business days after the invoice date to RealTrack Systems. The product must retain packaging, with all peripherals and accessories intact, enclosing the original invoice from RealTrack Systems. If a product is tested and the problem does not play, will charge the customer a 15% "no problem found". 2. Defective Products RealTrack Systems offers the warranty exchange / repair if defective products are within the time required by law. Note: If the customer returns equipment to benet from your warranty rights and this material is proven not defective, the customer will be responsible for all costs associated with the warranty claim unjustied, including transportation, inspection, etc. 3. Incorrect Deliveries by RealTrack Systems The customer service should be informed of any delivery errors in the course of 15 days from the invoice date. We will only accept the return of goods in their original condition and undamaged in the original packaging. RealTrack Systems will be responsible for transportation costs for return of material. RealTrack Systems attempt to collect goods once. If the customer or end user are not present at the time of collection, shall return the products at own expense. 4. Products Damaged in Delivery RealTrack Systems The customer service must be informed of all shipping damage within 10 days from the invoice date. Damage must be indicated to the runner at the time of receipt of material. Pictures of the damaged product to be sent to RealTrack Systems: please retain all packaging until inspection by the messenger. RealTrack Systems will be responsible for transportation costs for return of material. 5. Wrong Customer Order All requests must be made within 10 days from the invoice date. RealTrack Systems reserves the right to request a RMA number for the return of material when the customer has placed a wrong order. RealTrack Systems reserves the right to charge the customer a restocking fee of at least 15% of the product value. Systems RealTrack not accept returns of the following products:

- Accessories loose

- Software

- Inactive products

- Service contracts

- Material of special conditions requested to RealTrack Systems

- Materials developed specically for the client request

* The cost of the return postage will be paid by the customer. Product Returns The products are returned in their original packaging, complete and without any tape or writing printed on the packaging to the following address:

RealTrack Systems Return Centre C/ Guinea, 2 - 04009 Almeria (SPAIN) Shipping Tips Returns are only accepted if they are recognized by an RMA or DOA. The DOA RMA number must be clearly indicated on the top of the box so you do not damage the original box. Always mention the number in the transport docu-

ment. Any product received damaged due to insufcient packaging, is subject to rejec-

tion of the warranty and / or warranty replacement request. It is your responsibility to initiate and solve all load demands of any product recei-

ved damaged with the appropriate carrier. It is your responsibility to ensure that these requirements are met. Privacy Policy, DATA PROTECTION ACT Pursuant to the Organic Law 15/1999, of December 13, Protection of Personal Data, we inform you that personal data supplied on this form, along with those obtained during the development of the service, will be incorporated into a le owned by RealTrack Systems, SL duly declared to the Spanish Agency for Data Protection, in order to respond to your request regarding the AFTER SALES SERVICE. We inform you that you have at all times the exercise of rights of access, cancellation, rectication and opposition by writing by post, enclosing a photocopy of your ID, in the address C / Guinea, 2nd Zip: 04009 Almera (Spain). C U S T O M E R I N F O R M A T I O N 1 0

Top Bottom Image 1 Model - FCC is engraved on the rear bottom of the device Image 2 Model - Marking detail on model Image 3 FCC marking detail Page 1

Date: January 7th 2020 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Rd. Columbia MD 21046 Ref: Agent letter for FCC ID: 2AQOV-WIMUPRO We, Realtrack Systems S.L. Calle Guinea, 2, Almer a, 04009, Spain hereby authorize, DEKRA Testing and Certification, S.A.U. Parque Tecnol gico de Andaluc aC/ Severo Ochoa n 2. 29590 Campanillas - M laga. Spain Agent: Mr.Alvaro Corrales Sede o e-mail: alvaro.corrales@dekra.com Phone: . +34 925 619 198 to act as our agent in the preparation of this application for equipment certification, including the signing of all documents relating to these matters. We also hereby certify that neither we nor any party to this application are subject to a denial of U.S. Federal benefits, which include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, U.S.C. 862 because of conviction for possession or distribution of controlled substance. For instances where our authorized agent signs the application for certification on our behalf, | acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by DEKRA Testing and Certification, S.A.U., still resides with us. This agreement expires one year from the current date. Sincerely, By: Isabel Segura : ee Title: CEO Company: | Realtrack Systems S.L. 3 Telephone: | + 349Sc242.539 k e-mail: Anfe 2 Pealeraciesy Stems. Con Pagina 1de1

Confidentiality request Date: 03/12/2020 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Rd. Columbia MD 21046 FCC ID: 2AQOV-WIMUPRO To whom it may concern:

Pursuant to 0.457(d)(1)(ii) and 0.459 of the Commissions Rules (47 C.F.R.) and 552 (b)(4) of the Freedom of Information Act, REALTRACK SYSTEMS S.L. hereby request requests that a part of the subject FCC application be held confidential to avoid release of sensitive information of the product to the public. For the product stated above, we request that the following information be withheld from public disclose:

Type of Confidentiality Requested Exhibit Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Permanent Permanent Permanent Permanent Permanent Block Diagrams External Photos Internal Photos Operation Description Parts List & Placement/BOM Tune-Up Procedure Schematics Test Setup Photos Users Manual The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to us and provide unjustified benefits to our competitors. We hereby request short-term confidentiality for the product stated above to avoid premature release of sensitive information prior to marketing or release of the product to the public. Permanent Confidentiality:

Short-Term Confidentiality:

Release date of short term confidentiality is:

45 days from grant date marked 90 days from grant date marked 135 days from grant date marked 180 days from grant date marked Specific date:

Sincerely, By:

Title:

Telephone:

e-mail:

Isabel Segura CEO

+34950272379 info@realtracksystems.com We are also aware that we are responsible to notify DEKRA Testing and Certification S.A.U. in the event information regarding the product or the product is made available to the public. DEKRA Testing and Certification S.A.U. will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705.

Suppliers Declaration of Conformity Date: 05/01/2021 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Rd. Columbia MD 21046 FCC ID: 2AQOV-WIMUPRO Pursuant to 15.101 of the Commissions Rules (47 C.F.R.), REALTRACK SYSTEMS S.L. hereby declare that the device above mentioned is classified under the following equipment class/classes:

JAB JAD JAV JBP JBC CXX CRR CYY HID Part 15 Class B Digital Device Part 15 Class A Digital Device Other Non-Digital SDoC Devices Part 15 Class B Computing Device Peripheral Part 15 Class B Computing Device/Personal Computer Communications Rcvr for use w/ licensed Tx and CBs Superregenerative Receiver Communications Receiver used w/Pt 15 Transmitter Part 15 TV Interface Device And will follow the Authorization procedure Suppliers Declaration of Conformity prior to the initiation of marketing. Sincerely, By:

Title:

Telephone:

e-mail:

Isabel Segura CEO

+34950272379 info@realtracksystems.com