FCC ID: 2AEUPRBPS001 Solar Pathlight

Solar Pathlight Smart Lighting Download the Ring app. The app walks you through setting up and managing your Pathlight. Search for Ring in one of these app stores, or visit: ring.com/app Set up your Ring Bridge. The Bridge is required to connect your Ring Smart Lights to the Ring app and other compatible Ring devices. To set up your Bridge, follow the instructions in the Ring app or the Bridge user manual. Download from Windows Store 3 Remove the top cap. While holding the bottom securely, twist the top cap counterclockwise to unlock it, then remove it from the base. Remove the battery pull-tab. Once removed, the included lithium-ion battery will be activated and your Pathlight will flash twice to indicate its powered on. Risk of fire, explosion, or burn. Do not short circuit, crush, heat above 60C, incinerate, or disassemble the battery. 4 5 Charge your Pathlight. Plug the provided micro USB cable into a USB power supply (not included), then connect it to your Pathlight to charge its battery. The light will slowly turn on and off while charging. When it glows continuously, its fully charged and you can unplug the USB cable. If you cant wait to play with your Pathlight, go ahead and set it up. But we recommend you fully charging it before installation. Set up your Pathlight in the Ring app. In the app, tap Set Up a Device. When prompted, select Smart Lighting and follow the in-app instructions. Once setup is complete, place the top cover back onto your Pathlight. Turn it clockwise to the lock position to secure it. Ensure the arrow and lock on back of unit line up. 6 7 Align the guide rib. Guide the channel in the bottom of the light onto the rib inside the pole. Attach the light. Carefully join the light housing and the pole, and push until they fit together snugly. 8 9 Attach your Pathlight. Lower your Pathlight onto the stake and twist clockwise until it clicks to lock it into place. Drive the stake. Gently drive the stake into the ground at your chosen location that gets direct sunlight. Make sure the Sensor Direction arrow is pointing toward the area you want to monitor for motion. If youre installing multiple Pathlights, space them 5-7 feet apart for the best motion sensing performance. 10 11 For additional help, visit: ring.com/help Or give us a call US 1 800 656 1918 Canada 1 855 300 7289 Worldwide +1 310 929 7085 For a list of all our customer support numbers, visit: ring.com/callus 2019 Ring LLC or its affiliates. Ring and all related logos are trademarks of Ring LLC or its affiliates.

70mm 84mm 1523 26th St. Santa Monica, CA 90404 Models: Ring Motion Sensor (5SM1S8), Ring Spotlight (5B11S8), Ring Steplight (5LD1S8), Ring Pathlight (5LP1Y8), Ring Floodlight Battery (5B21S8), Ring Floodlight Wired (5W21S8), Ring Transformer (5AT1S9), Ring Solar Steplight

(5AT1S7), Ring Solar Pathlight (5AT1S6), Ring Solar Floodlight (5AT1S5) IMPORTANT PRODUCT INFORMATION Safety and Compliance Information Use Responsibly. Read all instructions and safety information before use. SAFETY INFORMATION FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS COULD RESULT IN FIRE, ELECTRIC SHOCK, OR OTHER INJURY OR DAMAGE. Small parts may pose choking hazards. Keep device and box contents out of reach of children. For models 5SM1S8, 5B11S8, 5LD1S8, 5LP1Y8, 5B21S8, 5AT1S7, 5AT1S6, 5AT1S5, your device can withstand outdoor use and has been tested to withstand water projected through a 12.5mm nozzle at a volume of 100 liters per minute and a pressure of 100 kPa at a distance of 3 meters for at least 3 minutes. For models 5W21S8 and 5AT169, your device has been certified to withstand outdoor use according to the UL Wet Locations requirements. However, for all models listed above, your device is not intended for underwater use. To protect against electric shock, do not intentionally submerge or immerse your device in water or expose your device to other liquids. Do not spill any food or beverages on your device. Do not attempt to clean or polish your device with or expose your device to oil, lotion, or other abrasive substances. Do not expose your device to pressurized water, high velocity water, or extremely humid conditions (such as a steam room). Do not attempt to dry your device with an external heat source, such as a microwave oven or a hair dryer. To avoid risk of electric shock, do not touch your device or any wires connected to your device during a lightning storm while your device is plugged in. If your device appears to be damaged, discontinue use immediately. BATTERY SAFETY m m m m 8 4 6 6 1 For models 5SM1S8, 5B11S8, 5LD1S8, 5LP1Y8, 5B21S8 HANDLE WITH CARE. This device may require batteries for use. Only use battery types that are specified for use with your device to power your device. Do not use any other type of battery to power your device. Do not mix old and new batteries. Install batteries with correct polarity. Do not disassemble, open, crush, bend, deform, puncture, or shred or attempt to access the battery in your device. Do not modify or remanufacture the battery, attempt to insert foreign objects into the battery, or immerse or expose it to water or other liquids, expose to fire, explosion or other hazard. Do not short-circuit the battery or allow metallic conductive objects to come into contact with battery terminals. Avoid dropping the device or battery. If the device or battery is dropped, especially on a hard surface, and the user suspects damage, do not attempt repair. Contact Ring Customer Service for assistance. Keep batteries out of reach of children. Remove all batteries before storing your device for an extended period of time. Replace batteries at regular intervals. Dispose of all batteries in accordance with applicable laws and regulations. Do not mix Alkaline, Standard Carbon Zinc, Rechargeable Nickel Cadmium or Nickel Metal Hydride batteries. Battery fluid may be toxic and corrosive. If batteries begin to leak, do not allow battery fluid to touch skin or clothing. Carefully remove the batteries and clean the battery compartment in accordance with the battery manufacturers recommendations. Your device may contain a removable, rechargeable lithium-ion Ring-branded battery or Quick Release Battery Pack (Ring Battery Pack). Only use the USB charging cable or solar panel that is provided in-box to recharge the battery or Ring Battery Pack. Do not use the battery or Ring Battery Pack with any device for which it has not been specified. Use of an unqualified battery or charger may present a risk of fire, explosion, leakage or other hazard. For models 5AT1S7, 5AT1S6 and 5AT1S5 Product Specifications Electrical ratings:

Recycling Your Device Properly For Canadian Customers Motion Sensor: 3 x AAA-cell batteries Spotlight: 4 x D-cell batteries; Steplight: 3 x C-cell batteries; Pathlight: 4 x D-cell batteries ;Floodlight Battery: 4 x D-cell batteries; Floodlight Wired: 110-240 VAC, 50-60 Hz; Transformer: 120 VAC, 60 Hz, 200 W maximum load; Solar Steplight: 5V DC 1A , 1 x 18650 Li-ion battery; Solar Pathlight: 5V DC 1A, 1 x 18650 Li-ion battery; Solar Floodlight: 5V DC, 1 x Quick Release Battery Pack Operating conditions: Floodlight Battery, Solar Floodlight: -4F to 122F (-20C to 50C); Floodlight Wired: -4F to 118F (-20C to 48C); Motion Sensor: -4F to 122F (-20C to 50C); Pathlight, Solar Pathlight: -4F to 122F (-20C to 50C) ;

Spotlight: -4F to 122F (-20C to 50C); Steplight, Solar Steplight: -4F to 122F (-20C to 50C) ; Transformer: -4F to 122F (-20C to 50C) In some areas, the disposal of certain electronic devices is regulated. Make sure you dispose of, or recycle, your device in accordance with your local laws and regulations. For information about recycling your device, go to www.amazon. com/devicesupport. Innovation, Science and Economic Development Canada (ISED) Compliance. This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas license-exempt RSS(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Ring_Smart_Lights_legal_Wave2.indd 1 12/3/19 7:21 PM Conformit Innovation Sciences et Dveloppement conomique Canada (ISDE) Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : (1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. Information Regarding Exposure to Radio Frequency Energy: This equipment complies with IC RSS-102 RF exposure limits set forth for an uncontrolled environment. Informations concernant lexposition aux radiofrquences: Cet quipement est conforme aux limites dexposition aux rayonnements IC tablies pour un environnement non contrl. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAN ICES-3 (B)/NMB-3(B) For United States Customers The party responsible for FCC compliance is Amazon.com Services, Inc. 410 Terry Ave North, Seattle, WA 98109 USA] Ring, LLC. 1523 26th St. Santa Monica, CA 90404 USA. For additional help, visit: ring.com/help Or give us a call:

US +1 800 656 1918 Canada +1 855 300 7289 Worldwide +1 310 929 7085 For a list of all our customer support numbers, visit: ring.com/callus Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Information on this device is on file with the FCC and can be found by inputting the devices FCC ID into the FCC ID Search form available at https://www.fcc.gov/oet/ea/fccid. The output power of the radio technology used in the Products is below the radio frequency exposure limits set by the FCC. Nevertheless, it is advised to use the Products in such a manner that minimizes the potential for human contact during normal operation. This device should be installed and operated with at least 20 cm between the radiator and your body. General NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. Use of the product is subject to your registration with Ring and your agreement with the Terms of Service found at www.ring.com/terms To review your warranty coverage, please visit www.ring.com/warranty 2019 Ring LLC or its affiliates. Ring, Always Home, and all related logos are trademarks of Ring LLC or its affiliates. Ring_Smart_Lights_legal_Wave2.indd 2 12/3/19 7:21 PM

C50S-BLK_Product Label Size44*27mm Material: PET Solar Pathlight Model No: 5AT1S6 FCC ID: 2AEUPRBPS001 IC: 20271-RBPS001 Power input: 5V 1A DC Battery: 3.7V 18650 Li-ion Ring Santa Monica, CA www.ring.com/patents Made in China 7mm Solar Pathlight Model No: 5AT1S6 FCC ID: 2AEUPRBPS001 IC: 20271-RBPS001 Power input: 5V 1A DC Battery: 3.7V 18650 Li-ion Ring Santa Monica, CA www.ring.com/patents Made in China RBPS11930BK000001 4.93mm Label location Solar Pathlight Model No: 5AT1S6 FCC ID: 2AEUPRBPS001 IC: 20271-RBPS001 Power input: 5V 1A DC Battery: 3.7V 18650 Li-ion Ring Santa Monica, CA www.ring.com/patents Made in China RBPS11930BK000001

Sample Agency Request Letter Authority to Act as Agent Date: 28 November 2019 TUV Rheinland Group 762 Park Avenue Youngsville, NC 27596 To Whom It May Concern:

I appoint TUV Rheinland (Shenzhen) Co., Ltd. to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the FCC or Industry Canadas regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by TUV Rheinland Group, still resides with Ring LLC / 1523 26th Street, Santa Monica, California 90404, United States For TCB applications, We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Expiration Date:

2020/11/20

(Signature) Carro Hsieh

(Print Name) Engineer Telephone

+1 (800) 656-1918 On behalf of

Ring LLC

(Company Name) Page 1 of 1 Revision 0 By Title

QF094234

Confidentiality Letter Date: 11 December 2019 Subject: Confidentiality Request for FCC ID: 2AEUPRBPS001 and IC ID: 20271-RBPS001 Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 10, the applicant requests that a part of the subject FCC/IC application be held confidential. Type of Confidentiality Requested Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Permanent Permanent Permanent Permanent Permanent Permanent Permanent Permanent Exhibit Block Diagrams External Photos Internal Photos Operation Description/Theory of Operation Part List/Tune-Up Procedure Schematics Test Setup Photos Users Manual Ring LLC has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will r esult in financial hardship. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality:

The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aw are that they are responsible to notify TUV Rheinland in the event information regarding the product or the product is made available to the public. TUV Rheinland will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-

1705. Sincerely, By:

(Signature/Title) Carro Hsieh

(Print name)

Date: 6 January 2020 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 USA To Whom It May Concern, Request for Class II Permissive Changes:

We, Ring LLC hereby authorize TUV Rheinland of North America to act as a laboratory for testing and test report generation for the following project(s):

FCC ID: 2AEUPRBPS001, Model: 5AT1S6 Pursuant to CFR 2.1043, this project is a Permissive Change II submission for the purpose:

1. Remove one band Modulation LoRa FHSS by software change:

Modulation LoRa FHSS Operating Frequency Type of Modulation Channel Number Channel Bandwidth Channel Separation 902.3 to 914.9 MHz LoRa FHSS 64 channels 125 KHz 200 KHz 2. Add one band Modulation LoRa FHSS by software change:

Modulation LoRa FHSS Operating Frequency Type of Modulation Channel Number Channel Bandwidth Channel Separation 902.2 to 927.8 MHz LoRa FHSS 129 channels 125 KHz 200 KHz 3. Add one band Modulation FSK FHSS by software change:

Modulation FSK FHSS Operating Frequency Type of Modulation Channel Number Data Rate Channel Separation 902.5 to 927.5 MHz FSK FHSS 51 channels 250 Kbps 500 KHz 4. Optimize the filter circuit, to enhance the suppression of spurious emission. (Remove the component the 3.3pF Capacitor CC13 and change the component inductor L9 to 12nH). This authorization is valid until further written notice from the applicant. Sincerely Yours, By Title On behalf of

(Signature) Carro Hsieh

(Print Name) Engineer Telephone

+1 (800) 656-1918 Ring LLC

(Company Name)