FCC ID: 2AOSY-SENSE03 Bluetooth low energy proximity beacon

Connected Products and Services Nexeed Track and Trace Sense I User Guide Version 1.2 Bosch Connected Industry Robert Bosch Manufacturing Solutions GmbH, 2019. All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights. Contents |

3 | 19 Contents 1 Introduction. 4 2 Radio Frequency Radiation Exposure and Further Information. 5 3 Technical Specifications. 6 4 Ordering Information. 7 5 Mounting. 8 6 Operation. 10 7 Dimensions. 11 8 Handling and Shipping Information. 12 9 Support. 13 10 Disposal. 14 11 Regulatory Notes. 15 12 Intended Use. 17 13 Safety Notes. 18 Robert Bosch Manufacturing Solutions GmbH d1.0-0019-4840-1.2-ug01en 27.09.2019 C-SC0 4 | 19 1 Introduction Introduction |

By being attached to the asset, the Sense I sensor makes the management of assets and material flow transparent and traceable. Tracking data is transferred to the Bosch IoT Cloud via Bosch Connect gateways or mobile applications. The Sense I sensor is a battery-operated device for asset tracking use cases. It uses a 2.4 GHz Low Energy radio to communicate with corresponding receivers for data transmission. The Sense I sensor provides A unique visual ID (GIAI code) as DMC readable by standard scanner applications A unique electronic ID transmitted via 2.4 GHz wireless technology to be captured by Bosch Connect gateways or standard Android smartphone apps Application advantages Long battery lifetime resulting in less handling effort Simple and fast to mount Very compact design Maintenance-free device Extremely robust device No configuration required Enables tracking transparency within the supply chain d1.0-0019-4840-1.2-ug01en 27.09.2019 C-SC0 Robert Bosch Manufacturing Solutions GmbH Radio Frequency Radiation Exposure and Further Information |

5 | 19 2 Radio Frequency Radiation Exposure and Further Information The radiated output power of the device is far below the FCC radio frequency exposure limits. Nevertheless, the device shall be used in such a manner that the potential for human contact during normal operation is minimized. Robert Bosch Manufacturing Solutions GmbH d1.0-0019-4840-1.2-ug01en 27.09.2019 C-SC0 6 | 19 Technical Specifications |

3 Technical Specifications Technical data TECHNICAL DATA Dimension (L x W x H) Weight Power supply Battery life Wireless transmission Housing Certifications Operating conditions OPERATING CONDITIONS Operating temperature Storage temperature Storage time 33 mm x 23 mm x 6 mm approx. 7 g CR2032

> 8 years based on ambient temperature conditions

(+25C) and usage in standard transportation use cases Technology Protocol Range/Power Transmission interval 15 s IEEE 802.15.1 Proprietary

> 50 m free line of sight / < 0 dBm Material EN 60529 protection category Plastic PA66 IPx7, IP67 RoHS, CE, FCC further on request

-30C +70C

+10C +30C 6 months long storage can reduce battery life d1.0-0019-4840-1.2-ug01en 27.09.2019 C-SC0 Robert Bosch Manufacturing Solutions GmbH Ordering Information |

7 | 19 4 Ordering Information Product number:

Sense I Mounting Plate Order Code: 3843.AW1.474 Order Code: 3843.AW1.884 For any sales information or support, please contact Bosch Connected Industry at support.tnt@de.bosch.com. Robert Bosch Manufacturing Solutions GmbH d1.0-0019-4840-1.2-ug01en 27.09.2019 C-SC0 8 | 19 5 Mounting Mounting |

In general, the Sense I sensor can be mounted in any position as required. For a robust attachment of the device to the asset, Bosch Connected Industry recommends:

Double-sided adhesive tape 3M VHB Tape 5952F Available mounting plate 3843.AW1.884 Available mounting cover 3843.AW3.381 Mounting Plate 3843.AW1.884 Mounting Plate with Sensor on a Lattice Box Mounting Cover 3843.AW3.381 d1.0-0019-4840-1.2-ug01en 27.09.2019 C-SC0 Robert Bosch Manufacturing Solutions GmbH Mounting |

9 | 19 When mounting the device, consider the following information. To enable wireless transmission, do not place the device inside metal enclosures and do not cover the device with metal. To enable wireless transmission, do not place the device inside liquids. Avoid positions that hinder logistics operation in a warehouse, terminal etc. Avoid positions that prevent wireless transmissions (e.g. coverings with metal parts). Avoid positions hotter than allowed for this device (refer to Technical Specifications). Avoid covering barcodes on any labels attached to the logistic asset. Ensure robust attachment of the device to the asset by using recommended mounting fixtures or adhesive tape. Robert Bosch Manufacturing Solutions GmbH d1.0-0019-4840-1.2-ug01en 27.09.2019 C-SC0 10 | 19 6 Operation Operation |

The 2.4 GHz Low Energy radio is a 802.15.1-compatible wireless communication interface. The device is transmitting information packages in constant intervals (every 15 s) on following frequencies:

2.402 GHz 2.426 GHz 2.480 GHz Activation The Sense I sensor is delivered with activated wireless transmission. An activation or configuration is not required. Operation Within the Nexeed Track and Trace solution, the data is received and processed by Bosch Connect gateways. The gateways transfer the received data with additional gateway data to the Bosch IoT Cloud. d1.0-0019-4840-1.2-ug01en 27.09.2019 C-SC0 Robert Bosch Manufacturing Solutions GmbH Dimensions |

7 Dimensions The following figure shows the dimensions of the Sense I sensor. 11 | 19 Robert Bosch Manufacturing Solutions GmbH d1.0-0019-4840-1.2-ug01en 27.09.2019 C-SC0 12 | 19 Handling and Shipping Information |

8 Handling and Shipping Information Battery Battery Type Battery Model Energy Content Weight of Battery Lithium Content Transport Test Additional documents (on request) Datasheet of battery Article Safety Data Sheet of battery UL registration at MH14002 Lithium Metal Battery (Coin cell) CR2032 MFR 0.675 Wh approx. 2.8 g

< 0.25 g according to part III, section UN38.3 Regulations for shipping of one or multiple Sense I and usage of Sense I as tracking device on assets Road/Rail/Ocean transport UN classification Instructions Packaging Marking Documentation Road: UN 3091 Lithium Metal Batteries contained in equipment, 9 (E) Rail: 90 UN 3091 Lithium Metal Batteries contained in equipment, 9 Ocean: UN 3091 Lithium Metal Batteries contained in equipment, 9 ADR/RID SV 188 IMDG Code SP 188 Application of SV188 / SP188, because Lithium contained is < 2 g Protection of battery by housing of device and potting of battery. No special packaging requirements. No marking required due to coin cell battery type contained in equipment. n/a d1.0-0019-4840-1.2-ug01en 27.09.2019 C-SC0 Robert Bosch Manufacturing Solutions GmbH Support |

9 Support 13 | 19 For any questions or inquiries, please contact Nexeed Track and Trace support at support.tnt@de.bosch.com. Robert Bosch Manufacturing Solutions GmbH d1.0-0019-4840-1.2-ug01en 27.09.2019 C-SC0 14 | 19 10 Disposal Disposal |

Disposing this product correctly will help save valuable resources and prevent any potential negative effects on human health and the environment, which could otherwise arise from inappropriate waste handling. Take into account the respective national regulations, since improper disposal may otherwise be subject to penalties. For the return of devices within the EU, follow the instructions below. Disposal according to the WEEE Directive 2012/19/EU WEEE-Reg.-No. DE 80087893 The unit, accessories, and packaging should be sorted for environmental-friendly recycling. Do not dispose of the device into the household waste! According to the European Guideline 2012/19/EU, electric and electronic devices that are no longer usable must be collected separately and disposed of in an environmentally correct manner. Bosch Connected Industry will collect, reuse, or recycle all used Bosch Connected Industry devices. To have your device collected, please contact us at: support.tnt@de.bosch.com. d1.0-0019-4840-1.2-ug01en 27.09.2019 C-SC0 Robert Bosch Manufacturing Solutions GmbH Regulatory Notes |

15 | 19 11 Regulatory Notes EU Declaration of Conformity Hereby, Robert Bosch Manufacturing Solutions GmbH Bosch Connected Industry declares that the radio equipment type Sense I is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:

http://eu-doc.bosch.com Model Search: Sense Operating the device in countries out of the EU The Sense I carries the CE mark and is certified for operation in the European Union. For countries out of the EU validate that local legal regulation allows the operation of the Sense I. Export Restrictions Due to legal regulations, the device must not be exported into the following countries or regions: Cuba, Crimea, Iran, North Korea, Syria, and Ukraine. Federal Communications Commission (FCC) Notice FCC has issued an EQUIPMENT AUTHORIZATION to Robert Bosch Manufacturing Solutions GmbH Bosch Connected Industry for Sense I according to FCC rule parts 15 C with the FCC ID: 2AOSY-SENSE03. FCC warning statement:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment Note:

This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Robert Bosch Manufacturing Solutions GmbH d1.0-0019-4840-1.2-ug01en 27.09.2019 C-SC0 16 | 19 Regulatory Notes |

Canada This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas license-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. d1.0-0019-4840-1.2-ug01en 27.09.2019 C-SC0 Robert Bosch Manufacturing Solutions GmbH Intended Use |

12 Intended Use 17 | 19 The Sense I sensor is designed according to the information provided in section Technical Specifications of this document. Any use or operation which requires specific requirements and standards which are not explicitly mentioned in this document must be validated and tested on the customers own responsibility. The housing of the Sense I sensor is not to be opened or tampered with. The Sense I sensor is designed for use within environmental conditions as further detailed in the technical specifications in section Technical Specifications. Any intent to use or operate the product under deviating environmental conditions must be subject to renewed validation and testing by the customer. Neither the Sense I sensor nor a potential product derivation, are designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Bosch product could create a situation in which personal injury or death may occur. The same applies for any kind of weapon, any device, or application which is potentially dangerous to human life. The Sense I sensor is designed for monitoring and tracking purposes and shall not be used as an element of control and safety in machines under the scope of the Machinery Directive 2006/42/EC. Bosch Connected Industry shall not hold liable for any damages resulting from any use of the Sense I sensor outside/

beyond the certified types of operation and/or defined field of application. Radio frequency radiation exposure information: this equipment complies with the radiation exposure limits prescribed for an uncontrolled environment for fixed and mobile use conditions. Robert Bosch Manufacturing Solutions GmbH d1.0-0019-4840-1.2-ug01en 27.09.2019 C-SC0 18 | 19 Safety Notes |

13 Safety Notes CAUTION: Lithium Battery!

Do only use this device if mounting does not harm any persons or objects. The device contains a lithium battery. Handling the battery incorrectly could cause fire. Read and follow the valid transportation regulations. Do not damage or cut the device. Do not dispose of the device in fire. Do not expose the device to higher temperatures than defined in this datasheet. Do not expose the device to direct sunlight. Do not mount the device on exposed positions on logistics assets that can cause detachment of the product. d1.0-0019-4840-1.2-ug01en 27.09.2019 C-SC0 Robert Bosch Manufacturing Solutions GmbH Your feedback helps us to continuously improve our products and components. Please submit any questions, comments or suggestions for improvement via our Contacts web page. Robert Bosch Manufacturing Solutions GmbH BCI Bosch Connected Industry Wernerstr. 51 70469 Stuttgart GERMANY https://www.bosch-connected-industry.com

Bosch Connected Industry () Federal Communications Commission Ladies and gentlemen, This Change of Identification request applies for a new FCC ID: 2AOSY-SENSE03 as established in 47CFR2.933 for a currently approved device. This application by Robert Bosch Manufacturing Solutions GmbH will establish a new FCC ID: 2AOSY-SENSEO3 under Bosch Manufacturing Solutions GmbH grant code for purposes of marketing. The original grant code 2ACQR-EMBPO will remain in effect. 1. The original identification is 2ACQR-EMBPO 2. The original grant date is 04/09/2019 3. The equipment is electronically identical, only model name, product name, labelling on device and Bluetooth payload information and FCC ID number are different. 4. The original test results are applicable and representative of this changed device. 5. Exterior photographs are included in this application. The following files are electronically submitted as attachment:

Authorization letter from Original Grantee Change in ID Request Letter FCC Agent Authorization Letter External Photos of new Application Yours sincerely

Robert Bosch Manufacturing Solutions GmbH Matthias Hilsmann Registered Office: 70469 Stuttgart, Registration Court: HRB 757070 Chairman of the Supervisory Board: Rolf Najork; Managing Directors: Enno Scharphuis, Dierk Gockel, Sven Hamann Banking connection: DE53 6007 0070 0166 5694 00 BOSCH Robert Bosch Manufacturing Solutions GmbH Postfach 30 02 20 70442 Stuttgart Visitors:

Wererstrabe 51 70469 Stuttgart-Feuerbach Tel +49 711 811-0 27 August 2019

em microelectronic Federal Communication Commission 7435 Oakland Mills Road Columbia, Maryland 21046 USA Marin, 12 August 2019 Federal Communication Commission To Whom It May Concern, This letter grants authorization for the representatives of Robert Bosch GmbH to apply to the FCC for a change in identification as specified under 47CFR2.933 of the FCC rules. This authorization applies to the EM Microelectronic EMBPO, FCC ID: 2ACQR-EMBPO. We are aware that Robert Bosch GmbH intends to market the above referenced product under FCC ID: 2AOSY-SENSE03 and model number 3843.AW1.474. Sincerely, Wl . Marc Morin Vice President - US Wireless and Sensing Business Unit Leader EM MICROELECTRONIC - US Inc., a company of the Swatch Group EM Microelectronic-Marin SA T. +41 32755 51 11 Rue des Sors 3, 2074 Marin F. +41 32 755 54 03 i <..6 Switzerland www.emmicroelectronic.com A COMPANY OF THE SWATCH GROUP