G277/G577/G577h DECT Quick Reference Guide G577h G577 G277 Front View Side Views Package Contents:
- G277/577(h) DECT Handset
- Battery
- Belt Clip
- This Reference Guide
- Additional Information Sheet To use the G277/577(h) for the first time:
- Open the battery lid;
- Remove the plastic strip from the battery contacts
- Close the battery lid;
- Place the G277/577(h) on the charger to fully charge the battery G277/577 DECT Handset Quick Reference Guide 1 Main Menu Items Top Line Icons Contacts Central Directory Calls Settings Calendar Accessories Messaging (G577(h)) Signal Strength Battery Status Ringer Off Microphone Muted Keypad Locked Missed Call Voice Mail Present Indication GETTING STARTED Turning the G277/577(h) on and off Press and hold for a few seconds. Activating your phone When the display of your phone is dark, press any key to activate your phone (phone in Idle mode). Lock/Unlock your phone Press and then
(toggle function). Make a call and then type the number you want to reach. an then type the number you want to reach (speakerphone call) 1. Press 2. Press 3. Type the number you want to reach and then 4. Use a speed dial key (
or or
) OR OR OR OR 5. Press soft key or
, select the required contact and press soft key
,
, or
. Answering an incoming call Press End a call or, for speakerphone call,
. Press Make an enquiry call
. During a call, press toggle between the two parties. Press Change the volume to transfer the call. and dial the number of the party you want to consult. Press to During a call, press Volume Up or Volume Down on the side of the phone. The default volume level is 4. Use the Speaker phone During a call, press Mute the microphone during a call
; to de-activate: press again. Press the soft key
. To turn the microphone on again, press the soft key
. 2 G277/577 DECT Handset Quick Reference Guide Write and send a text message (G577(h)) In Idle mode, press
, use the navigation keys to select and press the soft key
. 1. Press soft key 2. Use the navigation keys to select a stored draft message and press soft key
, then enter the text of your message. OR
. Then press soft key
, select the type of the message (normal or urgent) and choose the required destination(s). When message sent is given in the display your message has been sent successfully. Assigning a contact to a speed dialling key In Idle mode, press soft key
, select the contact you want to assign a speed dialling key and press soft key
. Choose and press soft key
. Use the navigation keys to scroll to the appropriate number (2..9) and press soft key Register the handset
.
, use the navigation keys to select In Idle mode, press the navigation keys to select keys to select Enter the requested registration information (contact your System Administrator for this). Wait for the registration to be completed. Using the menu
(connectivity) and press soft key
(Register) and press soft key and press soft key
. Use
. Use the navigation to access the main menu. Use the navigation keys to go to the In Idle mode, press required menu, menu tab and menu item. Use soft key chosen menu or menu item/tab. Other soft keys may provide additional options. To go back one step in the menu or leave altogether, press
( or press
.
) to select the G277/577 DECT Handset Quick Reference Guide 3 Feedback Key Sound Confirmation Sound Coverage Warning Charger Warning Noise Reduction Display Wallpaper Startup Screen Power Save Charger Backlight Calls Units Answer Mode Caller Filter Emergency Call Number Message SOS Key (G577(h)) Voicemail Number Silent Charging Missed Call Time Connectivity Register Deregister Select Network Bluetooth (G577(h)) Enabled/Disabled Search for Devices Paired Devices 5. Calendar Manage your appointments 6. Accessories Alarms Calculator Stopwatch 7. Messaging (G577(h)) Drafts Inbox Sent Messages Settings Menu list 1. Contacts List of contacts 2. Central Directory Select required contact by name 3. Calls All Calls Answered Calls Dialled Calls Missed Calls 4. Settings General Settings Silent Time & Date Language
(Supported: English, Spanish, German, French, Italian, Dutch, Danish, Swedish, Turkish, Polish, Norwegian, Greek & Russian) Shortcuts (for the navigation keys) LED Signal Red LED Green LED Yellow LED Blue LED Security Phone Lock Automatic Key Lock Change PIN Proxy Password Handset Name Reset Settings Status Sounds Normal & Sounds Silent Incoming Call Ring Volume Ring External/Internal/Unkn own Group Ring Intercom Ring Emergency Ring Arb. Ring Increasing Ring Vibrator Message Notifications
(G577(h)) Notification Volume Notification Normal/Urgent/Emerg ency Increasing Notification Vibrator Alerts Alert Volume Alert Melody Increasing Alert Vibrator 4 G277/577 DECT Handset Quick Reference Guide Le prsent appareil est conforme aux CNR d'ISEDC applicables aux appareils radio exempts de licence.L'exploitation est autorise aux deux conditions suivantes :
(1) l'appareil nedoit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. The device has been tested and compliance with SAR limits, users can obtain Canadian information on RF exposure and compliance Le prsent appareil est conforme Aprs examen de ce matriel aux conformit aux limites DAS et/ou aux limites dintensit de champ RF, les utilisateurs peuvent sur lexposition aux radiofrquences et la conformit and compliance dacqurir ISEDC Specific Absorption Rate (SAR) information For Handset SAR tests are conducted using standard operating positions accepted by the ISEDC with device transmitting at its highest certified power level in all tested frequency bands, although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. Before a new model device is a available for sale to the public, it must be tested and certified to the ISEDC that it does not exceed the exposure limit established by the ISEDC, tests for each device are performed in positions and locations as required by the ISEDC. For body worn operation, this model device has been tested and meets the ISEDC RF exposure guidelines when used with an accessory designated for this product or when used with an accessory that contains no metal. ISEDC Radiation Exposure Statement:
For Handset SAR lutilisation des rgles sma lemplacement Le matriel de transmission et fonctionnant dans tous les essais la certification, mme si la puissance suprme a dcid le niveau, utilisation spcifique peut tre trs en de de la valeur de rfrence maximale.Types de matriel sont vendus au public un ancien, dessai et de certification de lexposition, limite maximum sma, chaque document et lemplacement du matriel dessai et conformment au document.Le modle en physique, matriel dessai et conforme aux directives dexposition des radiofrquences sma quand une annexe dsign pour ce produit lors de leur utilisation ou des pices de rechange ne contiennent pas de mtal. FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Exposure to Radio Frequency (RF) Signals For Handset This is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limitsfor exposure to radio frequency (RF) energy set by the Federal Communications Commission (FCC) of the U.S.Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on the safety standards previously set by both U.S. and international standards bodies. These standards include a substantial safety margin designed to assure the safety of all persons,regardless of age and health. This device and its antenna must not be colocated or operating in conjunction with any other antenna or transmitter. This product has been shown to be capable of compliance for localized specific absorption rate
(SAR) for uncontrolled environment/general population exposure limits specified in ANSI/IEEE Std. C95.1-1992 and had been tested in accordance with the measurement procedures specified in FCC/OET Bulletin 65 Supplement C (2001) and IEEE 1528. ISEDC Warning:
This device complies with ISEDC licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device. G277/577 DECT Handset Quick Reference Guide 5 CS03 Warning This product meets the applicable ISEDC technical specifications. / Le present matriel est conforme aux specifications techniques applicables dISEDC. The REN is an indication of the maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed five. / Lindice dquivalence de la sonnerie (IES) sert indiquer le nombre maximal de terminaux qui peuvent tre raccords une interface tlphonique. La terminaison dune interface peut consister en une combinaison quelconque de dispositifs, la seule condition que la somme dindices dquivalence de la sonnerie de tous les dispositifs nexcde pas cinq. REN: NAN