R4024 DECT 6.0 Wireless Relay Station user manual statements

Additional Information RTX4024 Important safety information Charge the repeater only in combination with RTX4024 Repeater and the Ten Pao adapter S008CM0550060 that comes with the product. Plug the Ten Pao AC/DC adaptor in a wall outlet socket near the equipment for easy access/removal of the AC/DC adaptor. Sensitive Electronic Environment Any radio-based equipment can potentially cause interference with other equipment and can be interfered from other equipment. This also applies for DECT equipment. However due to the very low transmission power level the chances for interference are very small. Research proves that operational DECT Repeaters normally dont influence electronic equipment however some precautions must be taken into account for sensitive electronic equipment e.g. sensitive laboratory equipment. When DECT repeaters operate in straight nearness of sensitive electronic equipment incidental influence can appear. You are advised not to place the DECT repeaters on or close (less than 10cm) to this kind of equipment, even in standby mode. Please also use the other documentation supplied with the various parts of your telephone system. Product disposal information For countries in the European Union The symbol depicted here has been affixed to your product in order to inform you that electrical and electronic products should not be disposed of as municipal waste. Electrical and electronic products including the cables, plugs and accessories should be disposed of separately in order to allow proper treatment, recovery and recycling. These products should be taken to a designated facility where the best available treatment, recovery and recycling techniques are available. Separate disposal has significant advantages:

valuable materials can be re-used and it prevents the dispersion of unwanted substances into the municipal waste stream. This contributes to the protection of human health and the environment. Please be informed that a fine may be imposed for illegal disposal of electrical and electronic products via the general municipal waste stream. In order to facilitate separate disposal and environmentally sound recycling, arrangements have been made for local collection and recycling. In case your electrical and electronic products need to be disposed of please refer to your supplier or the contractual agreements that your company has made upon acquisition of these products. For countries outside the European Union Disposal of electrical and electronic products in countries outside the European Union should be done in line with the local regulations. If no arrangement has been made with your supplier, please contact the local authorities for further information. Regulatory information Europe Declaration of conformity esky RTX Products tmto prohlauje, e tento RTX4024 je ve shod se zkladnmi poadavky a dalmi pslunmi ustanovenmi smrnice 1999/5/ES. Dansk Undertegnede RTX Products erklrer herved, at flgende udstyr RTX4024 overholder de vsentlige krav og vrige relevante krav i direktiv 1999/5/EF. Deutsch Hiermit erklrt RTX Products, dass sich das Gert RTX4024 in bereinstimmung mit den grundlegenden Anforderungen und den brigen einschlgigen Bestimmungen der Richtlinie 1999/5/EG befindet. Eesti Kesolevaga kinnitab RTX Products seadme RTX4024 vastavust direktiivi 1999/5/E phinuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele stetele. English Hereby, RTX Products, declares that this RTX4024 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Espaol Por medio de la presente RTX Products declara que el RTX4024 cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE. RTX Products RTX4024 1999/5/. 1 Franais Par la prsente RTX Products dclare que lappareil RTX4024 est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE. slenska Hr me lsir RTX Products yfir v a RTX4024 er samrmi vi grunnkrfur og arar krfur, sem gerar eru tilskipun 1999/5/EC. Italiano Con la presente RTX Products dichiara che questo RTX4024 conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE. Latviski Ar o RTX Products deklar, ka RTX4024 atbilst Direktvas 1999/5/EK btiskajm prasbm un citiem ar to saisttajiem noteikumiem. Lietuvi iuo RTX Products deklaruoja, kad is RTX4024 atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas. Malti Hawnhekk, RTX Products, jiddikjara li dan RTX4024 jikkonforma mal-tiijiet essenzjali u ma provvedimenti orajn relevanti li hemm fid-Dirrettiva 1999/5/EC Magyar Alulrott, RTX Products nyilatkozom, hogy a RTX4024 megfelel a vonatkoz alapvet kvetelmnyeknek s az 1999/5/EC irnyelv egyb elrsainak. Nederlands Hierbij verklaart RTX Products dat het toestel RTX4024 in overeenstemming is met de essentile eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. Norsk RTX Products erklrer herved at utstyret RTX4024 er i samsvar med de grunnleggende krav og vrige relevante krav i direktiv 1999/5/EF. Polski Niniejszym, RTX Products deklaruje, ze RTX4024 jest zgodny z wymaganiami i innymi warunkami Dyrektywy 1999/5/EC. Portugus RTX Products declara que este RTX4024 est conforme com os requisitos essenciais e outras disposies da Directiva 1999/5/CE. Slovensko RTX Products izjavlja, da je ta RTX4024 v skladu z bistvenimi zahtevami in ostalimi relevantnimi doloili direktive 1999/5/ES. Slovensky RTX Products tmto vyhlasuje, e RTX4024 spa zkladn poiadavky a vetky prslun ustanovenia Smernice 1999/5/ES. Suomi RTX Products vakuuttaa tten ett RTX4024 tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sit koskevien direktiivin muiden ehtojen mukainen. Svenska Hrmed intygar RTX Products att denna RTX4024 str I verensstmmelse med de vsentliga egenskapskrav och vriga relevanta bestmmelser som framgr av direktiv 1999/5/EG. Intended use These repeaters are designed for use with an RTX IP DECT phone network. Any other use is considered unintended use. 0470 RTX Products HK Ltd 11/F CAC Tower Hoi Bun Road Kwun Tong Hong Kong 2 Regulatory information United States Interference information:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Modifications not expressly approved by RTX Products could void the users authority to operate the equipment. Privacy of communication may not be ensured when using this equipment. Exposure to Radio Frequency (RF) Signals This wireless repeater is a radio transmitter and receiver. It is designed and manufacturer not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission (FCC) of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on the safety standards previously set by both U.S. and international standards bodies. These standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. This product has been shown to be capable of compliance for localized specific absorption rate (SAR) for uncontrolled environment/general population exposure limits specified in ANSI/IEEE Std. C95.1-1992 and had been tested in accordance with the measurement procedures specified in FCC/OET Bulletin 65 Supplement C (2001) and IEEE 1528-2003 This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. 3 Regulatory information Canada Interference information:

Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Privacy of communications may not be ensured when using this equipment. Exposure to Radio Frequency (RF) Signals This repeater is a radio transmitter and receiver. It is designed and manufactured not to exceed this emission limit for exposure to radio frequency (RF) energy set by the Ministry of Health (Canada), Safety Code 6. These limits are part of comprehensive guidelines and established permitted levels of RF energy for the general population. These guidelines are based on the safety standards previously set by international standard bodies. These standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. This device has been shown to be capable of compliance for localized specific absorption rate (SAR) for uncontrolled environmental / general public exposure limits specific in ANSI/IEEE C95.1-1992 and had been tested in accordance with the measurement procedures specified in IEEE 1528-2003 This Class B digital apparatus complies with Canadian ICES-003 CET appareil numrique de la classe B est conforme la norme NMB-003 du Canada This device is exempted from RF Exposure Evaluation to Industry Canada requirements since the output power complies with the power levels of section 2.5.2 of RSS-102 Issue 4. 4