FCC ID: 2AE8P57121688 Baby Monitor System

2.4Ghz Wireless Digital 7 Baby Monitor System SBT-AS1901 User Manual Note:

1: Please do not work at a high temperature, high magnetic field or under the glare. 2: Use the designated power adapter and battery in case any serious damage of this product. 3: Do not put this product in those places where the temperature is extremely low or high. 4: Please turn off the power when you do not use this product. Meanwhile, please take out the battery when you do not use it for a long time. 5: Please avoid water and dust. 6: Please do not use thinner or other chemicals to wipe this product. 7: This product is designed for baby, please try to use it in interior. And it will reduce the display effect under strong light. 8: The AC adapter is for indoor use only. . Main Function Adopt 2.4GHz Frequency transmissionaccord with FCC, CE Standard With high resolution 7 LCD display screen Have a operational text menu display function Support one receiver to connect 4 transmitters Long-distance transmission: Up to 200-300m in open air;

Day and night monitoring with clear images for 24 hours Half-duplex Voice Transmission Voice clear, volume of sound (0~10) is adjustable VOX Activate functionwhen the volume of baby sound or happened in baby room is beyond the volume of VOX sensor, monitor will be activated (The screen in dormant state then automatically turn on with sound), to remind parents to pay attention to baby. Monitor with TV Out function, support TV display;

Camera and receiver use lithium batteries, convenient for mobile use;

With pairing code (or registering) function: make pairing through the pairing code buttons of monitor and camera;

Function Introduction 2.4Ghz Wireless camera 7 LCD Monitor Lens Infrared LED Recharge LED DC 5V input Work/Pair LED Speaker Power/Paring Key LEDWork LED Power Key: 3-5 sec long press to turn on/turn off Talk Key: Short press switchover the speaking side Right Key: To adjust parameter or switchover channels on Preview Screen. Left Key: To adjust parameter or switchover channels on Preview Screen. Shifting key on menu, VOX adjusting on Preview Screen Shifting key on menu, VOX adjusting on Preview Screen Menu/OK Key DC:DC 12V input AV-Out: Connecting TV Set, TV and LCD will display simultaneously. Pair: Press pair key for 1 sec to start pairing. Packing Content 5V DC Adaptor for camera. 1PCS 12V DC Adaptor for LCD 1PCS 7 Wireless LCD Monitor 1PCS 2.4Ghz Wireless Camera 1PCS User Manual 1PCS AV Cable 1PCS Li-Battery for camera 1PCS Instructions The camera and receiver use external power supply or built-in lithium battery, short press the Power/Pair button of the camera until the power indicator light is on. Then, press the Power button of the receiver for 3 seconds to turn on, and then press the Pair key to pair, meanwhile press the Power/Pair key of camera for 3-5 seconds, power light will flash and start to pair. After pairing succeed, Monitor will display Paired information, and to connect with cameras automatically. In the Preview Screen to press up/down button to adjust the volume of the LCD receiver and press left/right to switch the channels. Note: Its needed to pair only at the first time, after that, do not need to pair again. Main Menu:

In the Preview Screen short click OK button to enter the main menu display Baby Vol Effect Setup Exit Baby Vol Mode MAIN MENU Baby Vol Effect Setup Exit In the preview screen short click OK button to enter the main menu display,the options box stops in the "Baby Vol" option,this model is to adjust the volume of the camera and to adjust the volume of the LCD when pressing up/down button in the preview screen.Click OK button to enter the volume adjustment, press left and right adjust the volume , volume level from 0-100 (10 a level volume).Press OK Key to confirm and exit after this. Effect Mode MAIN MENU EFFECT Baby Vol Effect Setup Exit 1Brightness Mode Briness [ 50 ]

Vertizontal [ ON ]

Horizontal [ ON ]

Contrast [ 50 ]

Saturation [ 50 ]

In the preview screen, short click OK button to enter the main menu displaythen press the up/down key to move to Effect position when the press OK to enter.Press the up/down key move to brightness ,press left/right key to modify the parameter,the brightness level from 0-100 (10 a level brightness ) Press OK Key to confirm and exit after this. Brightness NoteThe brightness can be adjusted usefully only after receiving the image of camera, and the brightness is the cameras, not the LCDs. 2Vertical Mode In the preview screen ,short click OK button to enter the main menu display,then press the up/down key move to Effect position when the press OK to enter.Press the up/down key move to Vertical, press left/right key to modify the ON/OFF state. ON:Image display properly OFF:Mirror image shows around Press OK Key to confirm and exit after this. 3Horizontal Mode In the preview screen, short click OK button to enter the main menu display,then press the up/down key move to Effect position when the press OK to enter.Press the up/down key move to Horizontal, press left/right key to modify the ON/OFF state. ON:Image display properly OFF:Mirror image shows around Press OK Key to confirm and exit after this. 4Contrast Mode In the preview screen, short click OK button to enter the main menu display,then press the up/down key move to Effect position when the press OK to enter.Press the up/down key to move to contrast, press left/right key to modify the parameter,the contrast level from 0-100 (10 a level contrast) Press OK Key to confirm and exit after this. Note: The contrast can be adjusted usefully only after receiving the image of camera. 5Saturation Mode In the preview screen, short click OK button to enter the main menu displaythen press the up/down key move to Effect position when the press OK to enter.Press the up/down key move to Saturation, press left/right key to modify the parameter,the saturation level from 0-100 (10 a level saturation) Press OK Key to confirm and exit after this. NoteThe saturation can be adjusted usefully only after receiving the image of camera, and the saturation of this mode is fixed so the parameter wont change when adjusting. Setup Mode MAIN MENU Baby Vol Effect Setup Exit 1VOX Mode SETUP VOX Mode [ - - - ]

Auto Sleep [ OFF]

TV Out [ PAL ]

In the preview screen, short click OK button to enter the main menu display,then press the up/down key move to Setup position when the press OK to enter.Press the up/down key move to VOX Mode,press left/right key to modify the parameter.There are OFF/LO/HI 3 choices,it will display [---] if not receiving images. OFF:close sonic function, sonic function is invalid LO:Sonic low sensitivity,when the LCD enter sleep mode,the voice of the camera is more than 60 dB ,and the LCD will open automatically, and the screen display "VOX

". HISonic high sensitivity,when the LCD enter sleep mode,the voice of the camera is more than 56 dB ,and the LCD will open automatically, and the screen display "VOX

". 2Auto Sleep Mode In the preview screen ,short click OK button to enter the main menu displaythen press the up/down key move to Setup position when the press OK to enter.Press the up/down key move to Auto Sleep,press left/right key to modify the parameter. OFFWhen auto sleep mode off,short press POWER button to enter the auto sleep mode. 30S/1M/3M/5M/10Mchoose the time of automatic out screen time,then the LCD receiver will enter auto sleep mode.When the LO/HI of vox mode is on, the voice of the camera in the control level more than set up,the LCD will light automatically. 3TV OUT Mode In the preview screen ,short click OK button to enter the main menu displaythen press the up/down key move to Setup position when the press OK to enter.Press the up/down key move to TV OUT TV formats output model,press left/right key to modify the parameter, PAL-M/NTSC-3.58 / PAL/NTSC-4.43 four formats for choosing. Pair Process LCD Monitor with power, meantime cameras should be with power;

1: Choosing the camera code which is going to pair by Left and Right Key of the Monitor,such as CH1;

2:Press Power/Pair of Monitor for 3 seconds to make pairing, POWER light will flash LCD display 1# baby Pairing 3:Press the Power/Pair key of camera for 3 seconds, Green light flash and enter into pairing code;

4:After pairing successful, Monitor will show Paired information, and connect with cameras automatically. If can not pair code, it returns to original code and back to original state after 15 seconds, Repeat Step 4.2.2 Step 4.2.5 to make pairing code of Camera 2,3,4. Note:Different cameras should choose different channel to code, otherwise, it will override other cameras in this channel to code. Problems & Solutions 1:There are screaming voice if the distance between the camera and monitor is near Answer: This phenomenon is caused by the acoustical feedback, the audio signal of microphone is gleaned by receivers speaker and then the microphone pick the signal again and transmit them together with cameras voice, the receiver will have louder voice than before. Therefore, it can cause the formation of self-excited oscillation round and round, and result in the screaming voice. However, you can solve this problem by turn down the speaker volume or insert the headset into the receiver. 2: No response Answer: Check whether the power adapter is connected well, heck whether the battery is installed well. Please install the battery in correct direction. And check whether receiver power button is ON position 3LCD cant display when power on Answer: Please Check whether the AV line and not connected to insert the TV whether press the POWER button is short in auto sleep mode, then press the POWER button in short time to see if the display work or not. Parameters a: Function Function Description Frame Rate 15-25 FrameSignal strong, frame rate high Signal strength 6 grade indication Voice Volume 10 grade Talkback Two-way talk, half-duplex VOX Switch on automatically when there is voice One monitor with 4 One receiver with 4 cameras, switch CH display transmitter Real time clock:

Yes,24 hours system LCD Size 7 inch 800*480 RGB color LCD Transmission safety Use after pair code b: Electrical parameters LCD Receiver Voltage DC:12V1000MA DC: 5V/1000MABattery:External lithium battery Camera Voltage 3.7V/850MAH Frequency 2.4GHz ISM Band Wireless Work Method FHSS Transmission Power 19dBm@CW mode Transmission rate 3Mbps Operating Range Open field200-300 meter Transmitter Work TX: 400mA MAX,

(No recharge current Current calculation) Receiver Work Current TX: 560mA MAX Camera recharge 120-200MA current Work current for Auto TX:35mAonce every 0.5sRX:40mAonce every sleep Audio rate 0.5s 16K Audio range 120Hz~3KHz VOX Activate Volume: -56/-60dB@ MIC Input Camera resolution 0.3 Mega Video Rate 15-25FPS Out Put System PAL an NTSC Total harmonic

<5.0%

distortion SNR 46dB Receiving Sensitivity

-96dBm@BER=1e-3 Night vision range 3-5 meters Operating Humidity 20--80% RH Operating Temperature 0--60 Note The product should be 20cm for end users. FCC Warning This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. To comply with FCC RF exposure compliance requirements, this grant is applicable to only mobile configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AE8P57121688 Report No.: LCS1506150968E 1.INTERIOR PHOTOGRAPHS OF EUT Fig.1 Fig.2 This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 1 of 7 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AE8P57121688 Report No.: LCS1506150968E Fig.3 Fig.4 This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 2 of 7 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AE8P57121688 Report No.: LCS1506150968E Fig.5 Fig.6 This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 3 of 7 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AE8P57121688 Report No.: LCS1506150968E Fig.7 Fig.8 This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 4 of 7 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AE8P57121688 Report No.: LCS1506150968E Fig.9 Fig.10 This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 5 of 7 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AE8P57121688 Report No.: LCS1506150968E Fig.11 Fig.12 This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 6 of 7 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AE8P57121688 Report No.: LCS1506150968E Fig.13 Fig.14 This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 7 of 7

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AE8P57121688 Report No.: LCS1506150968E 1.EXTERIOR PHOTOGRAPHS OF EUT Fig.1 Fig.2 This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 1 of 5 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AE8P57121688 Report No.: LCS1506150968E Fig.3 Fig.4 This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 2 of 5 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AE8P57121688 Report No.: LCS1506150968E Fig.5 Fig.6 This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 3 of 5 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AE8P57121688 Report No.: LCS1506150968E Fig.7 Fig.8 This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 4 of 5 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AE8P57121688 Report No.: LCS1506150968E Fig.9 Fig.10 This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 5 of 5

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AE8P57121688 Report No.: LCS1506150968E Label and Location Size: 4.0x3.0cm Label And Location This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 1 of 1

Safe Baby Tech LLC Address: 17470 N Pacesetter Way, Scottsdale, ARIZONA 85255 Tel: 480 466 8754 Fax: 480 447 3404 2015-07-13 To:

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Confidentiality Request regarding application for certification of FCC ID: 2AE8P57121688 We hereby request confidential treatment of information accompanying this application as outlined below:

- Schematics Diagram

- Block Diagram

- Operation description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Clients name / title : Quinn McCullough / Project Manager Contact information / address : 17470 N Pacesetter Way, Scottsdale, ARIZONA 85255,United States Tel: 480 466 8754 Fax: 480 447 3404