| submitted | available | document details (if available) | source link |
|---|---|---|---|
| Adobe PDF Library 9.9 |
| various | User Manual | Users Manual | 5.63 MiB |
USER MANUAL MX-T70 WARNING To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. CAUTION Do not expose this apparatus to dripping or splashing. Do not put objects filled with liquids, such as vases, on the apparatus. To turn this apparatus off completely, you must pull the power plug out of the wall socket. Consequently, the power plug must be easily and readily accessible at all times. FCC Compliance Statement :
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. SAFETY INFORMATION SAFETY WARNINGS TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Refer to the table below for an explanation of symbols which may be on your Samsung product. CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN. This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product. This symbol indicates that this product comes with important literature concerning operation and maintenance. Class II product : This symbol indicates that a safety connection to electrical earth (ground) is not required. If this symbol is not present on a product with a power cord, the product MUST have a reliable connection to protective earth (ground). AC voltage : Rated voltage marked with this symbol is AC voltage. DC voltage : Rated voltage marked with this symbol is DC voltage. Caution. Consult Instructions for use :
This symbol instructs the user to consult the user manual for further safety related information. ENG - ii This product contains chemicals known to the FCC Caution :
Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electric appliances, such as radios and televisions, use shielded cables and connectors for connections. Class B FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorienting or relocating the receiving antenna. Increasing the separation between the equipment and receiver. Connecting the equipment to an outlet that is on a different circuit than the radio or TV. Consulting the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement :
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated so there is at least 8 inches (20 cm) between the radiator and your body. This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter. Important Safety Instructions Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference. 1. Read these instructions. 2. Keep these Instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturers instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. ENG - iii 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. To fully turn off the unit, disconnect the AC plug from the wall outlet. Unplug the unit if you intend to leave it unused for a long period of time. 11. Only use attachments/accessories specified 2. During thunderstorms, disconnect the AC plug from the wall outlet. Voltage peaks due to lightning could damage the unit. 3. Do not expose the unit to direct sunlight or other heat sources. This could lead to overheating and cause the unit to malfunction. 4. Protect the product from moisture (i.e. vases), and excess heat (e.g. a fireplace) or equipment creating strong magnetic or electric fields. Unplug the power cable from the AC wall socket if the unit malfunctions. Your product is not intended for industrial use. It is for personal use only. Condensation may occur if your product has been stored in cold temperatures. If transporting the unit during the winter, wait approximately 2 hours until the unit has reached room temperature before using. 5. The battery used with this product contains chemicals that are harmful to the environment. Do not dispose of the battery in the general household trash. Do not expose the battery to excess heat, direct sunlight, or fire. Do not short circuit, disassemble, or overheat the battery. Danger of explosion if the battery is replaced incorrectly. Replace only with the same or equivalent type. by the manufacturer. 12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. PRECAUTIONS 1. Ensure that the AC power supply in your house complies with the power requirements listed on the identification sticker located on the rear of your product. Install your product horizontally, on a suitable base (furniture), with enough space around it for ventilation (3~4 inches). Make sure the ventilation slots are not covered. Do not place the unit on amplifiers or other equipment which may become hot. This unit is designed for continuous use. ENG - iv ABOUT THIS MANUAL The user manual has two parts: this simple paper USER MANUAL and a detailed FULL MANUAL you can download. USER MANUAL See this manual for safety instructions, product installation, components, connections, and product specifications. FULL MANUAL You can access the FULL MANUAL on Samsungs on-line customer support center by scanning the QR code on the left. To see the manual on your PC or mobile device, download the manual in document format from Samsungs website.
(http://www.samsung.com/support) Design and specifications are subject to change without prior notice. Danger of explosion if the battery is replaced ENG - v CONTENTS 01 Checking the Components Inserting Batteries before using the Remote Control
(AAA batteries X 2) 02 Product Overview Top Panel of the Party Audio Rear Panel of the Party Audio 03 Connecting the Party Audio Connecting Electrical Power How to use Audio Group 04 Connecting an External Device Connecting using an Analog Audio (AUX) Cable Connecting a mobile device via Bluetooth 05 Connecting a USB Storage Device Software Update 06 Using the Remote Control How to Use the Remote Control 2
------------------------- 2 3
------------------------- 3
------------------------- 4 5
------------------------- 5
------------------------- 6 11
------------------------- 11
------------------------- 12 15
------------------------- 15 16
------------------------- 16 ENG - vi 07 08 09 10 11 Troubleshooting License Open Source License Notice Important Notes About Service Specifications and Guide 3 18 19 19 19 20
------------------------- 4 Specifications
------------------------- 20 5 15 16 ENG - vii 01 CHECKING THE COMPONENTS Party Audio Main Unit Remote Control (AH81-11472A) /
Batteries Power Cord
(AH81-11474A) For more information about the power supply and power consumption, refer to the label attached to the product. (Label: Rear of the Party Audio Main Unit) To purchase additional components or optional cables, contact a Samsung Service Center or Samsung Customer Care. When moving the product, do not drag or pull the product from the ground. Lift the product when moving the product. Inserting Batteries before using the Remote Control
(AAA batteries X 2) Slide the battery cover in the direction of the arrow until it is completely removed. Insert 2 AAA batteries (1.5V) oriented so that their polarity is correct. Slide the battery cover back into position. ENG - 2 02 PRODUCT OVERVIEW Top Panel of the Party Audio
BASS
Remote Sensor Display Window When operating the Party Audio system, please aim the front of the remote control at the remote sensor. Displays operating messages or current status of the Party Audio system. Power Turns the Party Audio on and off. Light Press the
(Light) button to turn the Lighting Mode on.
Source
Play/Pause Press to select a source connected to the Party Audio. Press and hold the Play/Pause
(Source) button to enter the BT PAIRING mode. Press the button to pause a music file temporarily. When you press the button again, the music file plays. Demo play Press and hold the power is on. DEMO appears on the display and play demo music for 60 seconds. button for 5 seconds to start the Demo play while the system
Volume down Press the
(Volume down) button to adjust the volume level down.
Volume up Press the
(Volume up) button to adjust the volume level up.
BASS Press the BASS button to use the powerful bass sound. ENG - 3 Rear Panel of the Party Audio
PAIRING ADD STEREO GROUP PLAY USB1
(5V 2.1A) USB2
(5V 0.5A) L IN R L OUT R AUX 1 ECHO 1 VOL 1 MIC 1 AUX 2 / GROUP PLAY MIC 2 VOL 2 ECHO 2
Bluetooth PAIRING
ADD STEREO
GROUP PLAY
USB1 USB2 ECHO1 VOL1 MIC1 AUX2/GROUP PLAY IN Terminals GROUP PLAY OUT Terminals AUX1 MIC2 VOL2 ECHO2 Power PAIRING button to enter the BT PAIRING mode. Press the Press the ADD STEREO button to connect to the another Party Audio wirelessly. Press the GROUP PLAY button to connect to the up to ten Party Audio systems wirelessly. Connect a USB device to the USB1 or USB2 ports on the main unit. If you connect your cell phone to the USB1 port, you can charge it. Press the You can give an echo effect to the sound from the microphones (MIC1) by turning the ECHO1. Use the VOL1 knob on the main unit to adjust the volume of the microphone
(MIC1).
(Source) button to select USB1 or USB2. Connect your microphone to the MIC1 jack. Use an Audio Cable (not supplied) to connect AUX2 (IN) terminals on the main unit to Audio Out on an external analog output device. Use an Audio Cable (not supplied) to connect GROUP PLAY (OUT) terminals on the main unit to Audio In on an external analog output device. Use an Audio (AUX) Cable (not supplied) to connect AUX1 jack on the main unit to Audio Out on an external device. Connect your microphone to the MIC2 jack. Use the VOL2 knob on the main unit to adjust the volume of the microphone
(MIC2). You can give an echo effect to the sound from the microphones (MIC2) by turning the ECHO2. Connect the power cord to the Power jack and connect the other end of the power cord to a wall socket to supply electrical power to the Party Audio. ENG - 4 03 CONNECTING THE PARTY AUDIO Connecting Electrical Power Use the power cord to connect the Party Audio to an electrical outlet in the following order:
Connect the power cord to the Party Audio and then to a wall socket. See the illustrations below. For more information about the required electrical power and power consumption, refer to the label attached to the product. (Label: Rear of the Party Audio) Rear of Party Audio Connecting Electrical Power ENG - 5 How to use Audio Group You can connect multiple audio systems in a group to create a party environment and to produce higher sound output. Activate a system in the group and share the music. Other systems are grouped to play Hosts music. Connecting the wired Group Play mode L IN R L OUT R L IN R L OUT R L IN R L OUT R AUX 2 / GROUP PLAY AUX 2 / GROUP PLAY AUX 2 / GROUP PLAY Continue the connection until the last Party Audio 1st Party Audio Host 2nd Party Audio Last Party Audio Set up a Group Play by connecting all the systems using audio cables (not supplied). If the system has a Group Play function, continue to connect several units. Use the AUX or
(Source) button to change the source to AUX2 for every Party Audio systems except the 1st Party Audio system. NOTES The 1st Party Audio Host can play music in any source. Depending on the length or characteristics of the cable, there may be a difference in operating distance. ENG - 6 You can connect multiple audio systems in a group to create a party environment and to produce higher Connecting the wireless Group Play mode You can connect up to ten Party Audio systems by wireless Group Play function.
GROUP PLAY GROUP PLAY GROUP PLAY Slave 1 Slave 2 Host 1. Press the GROUP PLAY button on the Host Party Audio system. The HOST message appears on the display of the host Party Audio and the LED blinks on the GROUP PLAY button. 2. Press the GROUP PLAY button on the 2nd Party Audio system (Slave 1). The GROUP PLAY CONNECTED message appears on the display and the GROUP PLAY button on both systems stops blinking. 3. Press the GROUP PLAY button on the 3rd Party Audio system (Slave 2). The GROUP PLAY CONNECTED message appears on the display and the GROUP PLAY button on the system stops blinking. 4. If you want to add more Party Audio systems, repeat step 3. 5. Play music on the Host Party Audio. Sound output from all the connected systems. NOTES The wireless Group Play connection is available for any Party Audio system. It may cause malfunction due to environment or other device effect. If the red LED is on the GROUP PLAY button, an error has occurred in the wireless Group Play connection. Try step 1 to step 5 again. The ADD STEREO button and PAIRING button on the slave Party Audio systems are not available while in wireless Group Play mode. Press and hold GROUP PLAY button before Group play connected, this Party Audio system will be Host immediately. The ADD STEREO button on the host Party Audio system is not available while in wireless Group Play mode. ENG - 7 All slave must be connected one by one. For example, after Host is connected, press GROUP PLAY button in slave 1 to connect, and after slave 1 is connected, you should connect slave 2 and slave 3 one by one sequentially. While in Group Play connection, currently connected Bluetooth connection is disconnected and Bluetooth connection is disabled. Bluetooth device can search and connect with the host Party Audio only. Slave Party Audio systems cannot be searched or connected on the Bluetooth device. If you power off and then power on the Party Audio or select the source other than BT in Group Play mode, the Group Play mode is disconnected. This product does not support aptX audio stream with Wireless Group Play mode. Disconnecting the wireless Group Play mode 1. Press and hold the GROUP PLAY button over 5 seconds (Host or Slaves) after Group Play connected or press the GROUP PLAY button (Host or Slaves) before Group Play connected. OFF-GROUP PLAY appears on the display and the LED above the GROUP PLAY button is off. 2. If you select the source other than BT or powered off on the host Party Audio, the Group Play mode is disconnected. If the disconnection has made from the host Party Audio, all the Group Play connection is disconnected. LED Indications LED Green Red STATE Blink On On Description Waiting for a wireless Group Play connection. The wireless Group Play connection has made. An error occurs in the wireless Group Play connection. ENG - 8 Bluetooth device can search and connect with the host Party Audio only. Slave Party Audio systems If you power off and then power on the Party Audio or select the source other than BT in Group Play Using the Stereo Group mode You can enjoy the stereo sound by connecting two Party Audio systems.
ADD STEREO ADD STEREO Left Party Audio
(Master) Right Party Audio
(Slave) 1. Press the ADD STEREO button on the left Party Audio system. The ADD STEREO message appears on the display and the LED blinks on the ADD STEREO button. 2. Press the ADD STEREO button on the right Party Audio system. The ADD STEREO message appears on the display and the LED blinks on the ADD STEREO button. 3. When the connection has made, The BT PAIRING message appears on the master Party Audio system and the STEREO MODE appears on the slave Party Audio system. The master Party Audio system output left channel sound and the slave Party Audio system output right channel sound. If you want to change the sound channels of Party Audio systems, press the ADD STEREO button on the current master Party Audio system. 4. Play music on the Party Audio. Sound output from both Party Audio systems. NOTES To use the Stereo Group mode, both Party Audio systems must be the same model. It may cause malfunction due to environment or other device effect. If the red LED is on the ADD STEREO button, an error has occured in the Stereo Group connection. Try step 1 and step 4 again. All the buttons except ADD STEREO button and Power button on the slave Party Audio systems are not available while in Stereo Group mode. The GROUP PLAY button on the host Party Audio system is not available while in Stereo Group mode. ENG - 9 While in Stereo Group connection, currently connected Bluetooth connection is disconnected and Bluetooth connection is disabled. If you select the source other than BT or power off and then power on the master Party Audio, the Stereo Group mode is disconnected. This product does not support aptX audio stream with Wireless Group Play mode. If you try make a Bluetooth connection while Stereo Group making, maybe the Stereo Group mode make fail. Disconnecting the Stereo Group mode 1. Press and hold the ADD STEREO button over 5 seconds (Master or Slave) after Stereo Group connected or press the ADD STEREO button (Master or Slave) before Stereo Group connected. OFF-ADD STEREO appears on the display and the LED above the ADD STEREO button is off. 2. If you select the source other than BT or powered off on the master Party Audio, the Stereo Group mode is disconnected. If one of the Party Audio is disconnected from Stereo Group mode, another Party Audio is automatically disconnected. LED Indications LED Green Red STATE Blink On On Description Waiting for a Stereo Group connection. The Stereo Group connection has made. An error occurs in the Stereo Group connection. ENG - 10 04 CONNECTING AN EXTERNAL DEVICE Connect to an external device via a wired or wireless network to play the external devices sound through the Party Audio. Connecting using an Analog Audio (AUX) Cable BD / DVD player / Set-top box /
Game console R
- AUDIO -
L
Rear of the Party Audio L IN R L OUT R AUX 2 / GROUP PLAY AUX 1 Audio (AUX) Cable
(not supplied) 0.14 inches (3.5 mm) stereo cable (not supplied)
Mobile device / MP3 / PMP
0.14 inches (3.5 mm) stereo Cable (AUX1) 1. Connect AUX1 jack on the main unit to the AUDIO OUT jack of the Source Device using an 0.14 inches (3.5 mm) stereo cable . 2. Select AUX1 mode by pressing the
(Source) button on the top panel or on the remote control. You can also select a source using AUX button on the remote control.
Audio Cable (AUX2) 1. Connect AUX2 (IN) terminals on the main unit to the AUDIO OUT terminals of the Source Device using an audio cable . 2. Select AUX2 mode by pressing the
(Source) button on the top panel or on the remote control. You can also select a source using AUX button on the remote control. ENG - 11 Connecting a mobile device via Bluetooth When a mobile device is connected using Bluetooth, you can hear stereo sound without the hassle of cabling. LIGHT USB AUX PAIRING ADD STEREO GROUP PLAY USB1
(5V 2.1A) OR PAIRING USB2
(5V 0.5A) SOUND MODE TEMPO Bluetooth device The initial connection 1. Press and hold the BT PAIRING mode. EFFECT DJ EFFECT DOWN UP PAIRING button on the remote control for a moment to enter the
(OR) Press the PAIRING button on the rear panel or press and hold the
(Source) button on the top panel for a moment to enter the BT PAIRING mode. 2. On your device, select [AV] Samsung Party T70 from the list that appears. When the Party Audio is connected to the Bluetooth device, [Bluetooth Device Name] BT appears in the front display. 3. Play music files from the device connected via Bluetooth through the Party Audio. If the device fails to connect If a previously connected Party Audio listing (e.g. [AV] Samsung Party T70) appears in the list, delete it. Then repeat steps 1 and 2. What is the difference between BT READY and BT PAIRING?
BT READY : In this mode, you can search for previously connected TVs or connect a previously connected mobile device to the Party Audio. BT PAIRING : In this mode, you can connect a new device to the Party Audio. PAIRING button on the remote control or the
(Press and hold the the Party Audio for more than 5 seconds to enter the BT PAIRING mode.) You can also press the PAIRING button on the rear of the Party Audio to enter the BT
(Source) button on top of PAIRING mode. ENG - 12 Bluetooth Multi connection The Party Audio can be connected to 2 Bluetooth devices at the same time. Bluetooth device 1 Bluetooth device 2 1. Connect the Party Audio to a Bluetooth device. (See page 12) 2. If you connect the 3rd Bluetooth device while 1st and 2nd Bluetooth devices are connected, the 1st and 2nd devices are disconnected. The maximum connecting 2 devices. 3. Play music from one of the connected Bluetooth device while dual Bluetooth connection. Another Bluetooth device pauses. Playback may not pause depending on the devices. NOTES You can connect up to two Bluetooth devices at a time. If asked for a PIN code when connecting a Bluetooth device, enter <0000>. It may cause malfunction due to environment or other device effect. The Party Audio automatically turns off after 20 minutes with no order input in the Ready state. The Party Audio may not perform Bluetooth search or connection correctly under the following circumstances:
If there is a strong electrical field around the Party Audio. If several Bluetooth devices are simultaneously paired with the Party Audio. If the Bluetooth device is turned off, not in place, or malfunctions. Electronic devices may cause radio interference. Devices that generate electromagnetic waves must be kept away from the Party Audio main unit - e.g., microwaves, wireless LAN devices, etc. When the Party Audio is connected to your TV by Bluetooth connection, the video on the TV and audio from the Party Audio may not be synchronized because the distance between the Party Audio and the TV is too far. It is recommended to move the Party Audio closer to your TV within 3.3 ft (1 meter). When the speaker is in the Bluetooth Multi connection mode, you will need to connect the other Bluetooth device and speaker within a few minutes (Approx. 1 minute). Otherwise Bluetooth Multi connection mode will be canceled. ENG - 13 Bluetooth Multi connection may not be supported depending on the connected devices specifications. Removable/detachable Bluetooth device (Ex:Dongle etc..) doesnt support Bluetooth Multi connection. After Bluetooth Multi connection pairing, it takes a little time for the music to be played depending on the Bluetooth devices. If you get out of Bluetooths effective distance without disconnecting Bluetooth, it may take a few minutes to connect other Bluetooth devices. But after turning the power off and on, you can connect other Bluetooth devices without waiting. LED Indications LED Blue STATE Fast Blink Blink On Description BT PAIRING mode BT READY mode A Bluetooth device is connected. Using Bluetooth Power On When the Party Audio is turned off, you can connect your smart device to the product via a Bluetooth connection to turn it on. 1. Press and hold the BASS button on the remote control or on the top panel to set the Bluetooth Power On function on. ON-BLUETOOTH POWER appears on the display. 2. When the Party Audio is off, connect your smart device to the product via Bluetooth. (For information on Bluetooth connections, refer to your smart devices manual.) 3. When the connection is complete, the Party Audio turns itself on automatically in Bluetooth mode. Select the desired music to play from your smart device. NOTE Press and hold the BASS button on the remote control or on the top panel to turn the Bluetooth Power On function on or off. Each time you press and hold the BASS button, the Party Audio displays :
ON-BLUETOOTH POWER OFF-BLUETOOTH POWER ENG - 14 05 CONNECTING A USB STORAGE DEVICE You can play music files located on USB storage devices through the Party Audio. Rear of the Party Audio USB1
(5V 2.1A) USB2
(5V 0.5A) OR USB storage device (not supplied) 1. Connect an USB storage device to the USB1 or USB2 jacks on your Party Audio. 2. Press the
(Source) button on the top panel or on the remote control, and then select USB1 or USB2. You can also select a source using USB button on the remote control. 3. USB1 or USB2 appears in the display screen. 4. Play music files from the USB storage device through the Party Audio. The Party Audio automatically turns off (Auto Power Down) if USB device is not connected, playback stopped and no order input for more than 20 minutes. Software Update Samsung may offer updates for the Party Audios system firmware in the future. If an update is offered, you can update the firmware by connecting a USB device with the firmware update stored on it to the USB1 or USB2 port on your Party Audio. For more information about how to download update files, go to the Samsung Electronics website at www.samsung.comSupport. Then, enter or select the model number of your Party Audio, select the Software & Apps option, and then Downloads. Note that the option names can vary. ENG - 15 06 USING THE REMOTE CONTROL How to Use the Remote Control
LIGHT PAIRING SOUND MODE USB AUX TEMPO EFFECT DJ EFFECT DOWN UP LIGHT
PAIRING
SOUND MODE BASS
LIGHT Turn the Party Audio on and off. Power USB AUX PAIRING
SOUND MODE LIGHT LIGHT EFFECT DJ PAIRING EFFECT SOUND MODE
DOWN UP USB
EFFECT Source AUX DOWN LIGHT TEMPO PAIRING Bluetooth EFFECT PAIRING SOUND MODE TEMPO USB AUX
(LIGHT) button to turn the Press the TEMPO Lighting Mode on. Each time you press the button to select the desired lighting mode by choosing AMBIENT, PARTY, DANCE, THUNDERBOLT, STAR, LOVER or OFF. Press to select a source connected to the Party Audio. DJ Each time you press the button to select a desired source by choosing BT, USB1, USB2, AUX1 or AUX2 . UP Press to select a source directly to "BT" mode. USB Press and hold the button to enter the "BT PAIRING" mode. EFFECT AUX TEMPO EFFECT DJ LIGHT LIGHT PAIRING SOUND MODE EFFECT PAIRING SOUND MODE EFFECT DOWN LIGHT PAIRING SOUND MODE EFFECT DOWN LIGHT LIGHT DOWN BASS EFFECT USB
UP PAIRING EFFECT Press to select the USB1 or USB2 sources DJ connected to the Party Audio. AUX LIGHT LIGHT SOUND MODE
USB USB PAIRING EFFECT AUX SOUND MODE USB DOWN TEMPO UP BASS AUX DJ AUX TEMPO EFFECT Press to select the AUX1 or AUX2 sources connected to the Party Audio. TEMPO Each time you press the button to select the desired sound effect by choosing PARTY, STANDARD, HIPHOP, EDM, ROCK, LATIN, HOUSE or REGGAE. DOWN UP EFFECT BASS DJ EFFECT EFFECT DJ Press the TEMPO + or TEMPO - buttons to change the tempo of the music up or down. This function operate only in the USB1 and USB2 mode. BASS DOWN UP UP
USB
LIGHT PAIRING SOUND MODE EFFECT DJ PAIRING SOUND MODE SOUND MODE AUX EFFECT TEMPO DOWN TEMPO +, -
EFFECT DOWN UP BASS ENG - 16 BASS USB AUX TEMPO LIGHT PAIRING LIGHT SOUND MODE USB LIGHT USB AUX AUX SOUND MODE EFFECT LIGHT PAIRING SOUND MODE DOWN
PAIRING
EFFECT PAIRING DJ PAIRING SOUND MODE DJ TEMPO EFFECT USB TEMPO AUX This function lets you turn on the DJ effect function. Each time you press the button to select the desired DJ sound effect by choosing NOISE, FILTER, CRUSH, CHORUS, WAHWAH or OFF. TEMPO DOWN USB SOUND MODE EFFECT DJ EFFECT DJ AUX EFFECT +, -
EFFECT TEMPO UP DOWN UP DJ EFFECT Press the EFFECT + or EFFECT - buttons to change the level of the each DJ sound effect up or down. EFFECT UP Press the
(DOWN) button to move to the previous folder in the USB device. DOWN UP EFFECT DJ Folder DOWN EFFECT
DOWN LIGHT UP BASS Folder UP LIGHT LIGHT PAIRING SOUND MODE EFFECT USB
PAIRING BASS BASS SOUND MODE USB BASS AUX EFFECT Volume up, USB TEMPO DJ PAIRING Volume down /
BASS SOUND MODE DJ
EFFECT Skip DOWN EFFECT DJ Press the
(UP) button to move to the next folder in the USB device. AUX Volume up, Volume down
(Volume up) or
(Volume down) to adjust the volume level up or Press the TEMPO down. Music Skip Press the EFFECT previous music file. AUX button to select the next music file. Press the button to select the TEMPO UP Press the button to pause a music file temporarily. When you press the button again, the music file plays. EFFECT DOWN UP Play / Pause DOWN UP
Mute BASS Repeat BASS BASS BASS Press the Press it again to unmute the sound.
(Mute) button to mute the sound.
(Repeat) button to use the Repeat function in USB1and USB2 mode. Press the Each time you press the button to select the desired repeat function by choosing ONE, FOLDER, ALL, RANDOM or OFF. Press the BASS button to use the powerful bass sound. ENG - 17 07 TROUBLESHOOTING Refer to the table below if this product does not function properly. If the problem you are experiencing is not listed below or if the instructions below do not help, turn off the product, disconnect the power cord, and contact Samsung Electronics at 1-800-SAMSUNG (1-800-726-7864). The unit will not turn on. Is the power cord plugged into the outlet?
; Connect the power plug to the outlet. A function does not work when the button is pressed. Is there static electricity in the air?
; Disconnect the power plug and connect it again. Sound dropouts occur in BT mode.
; See the Bluetooth connection sections on page 12. Sound is not produced. Is the Mute function on?
; Press the
(Mute) button to cancel the mute function. Is the volume set to minimum?
; Adjust the Volume. The remote control does not work. Are the batteries drained?
; Replace them with new batteries. Is the distance between the remote control and Party Audio main unit too far?
; Move the remote control closer to the Party Audio main unit. Stereo Group connection is not working. Is the system in wireless Group Play mode?
; Disconnect the wireless Group Play mode and try Stereo Group connection again. It cannot make a Bluetooth connection. Is the system connected to another system in wireless Group Play mode or Stereo Group mode?
; Try Bluetooth connection again after disconnecting the wireless Group Play or Stereo Group connection. Are the two Bluetooth devices already connected?
; Try Bluetooth connection again after disconnecting other Bluetooth connections. PAIRING button is not working. The Is the system in wireless Group Play mode or Stereo Group mode?
; Try again after disconnecting the wireless Group Play or Stereo Group connection. I want to switch the host system to the other in wireless Group Play or Stereo Group connection.
; Disconnect Group Play mode, press the Speaker which you want make to host first, and after it display HOST message, connect the others one by one.
; With Stereo Group mode, host is fixed. You can not change others as host. I want to play AUX1 or AUX2 more than 8 hours without order input.
; Press and hold the button for 5 seconds in AUX1 or AUX2 mode to disable Auto Power Down Function. Change from ON-AUTO POWER DOWN to OFF-AUTO POWER DOWN. ENG - 18 09 OPEN SOURCE LICENSE NOTICE To send inquiries and requests regarding open sources, contact Samsung via Email
(oss.request@samsung.com). 10 IMPORTANT NOTES ABOUT SERVICE Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. An administration fee may be charged if either:
a. An engineer is called out to your home at your request and there is no defect in the product. b. You bring the unit to a repair center and there is no defect in the product. You will be advised of the amount of the administration fee before any work is done or a home visit is made. If you have a problem with this product, we strongly recommend you read the appropriate section of this manual, visit the Support page for your product at www.samsung.com, or call Samsung Product Support (1-800-726-7864) to find an answer before you contact a service center for a repair. I cant connect a slave to Group play.
; After a long time (about 1 hour), connect the host block slave. Press the GROUP PLAY button on host, after it display HOST message, the slave can be reconnected. It cannot make a Wireless/Wired Group/Add Stereo/Bluetooth connection. Is the distance between systems too far?
; It is recommended to make a Wireless/
Wired Group/Add Stereo/Bluetooth pairing within 3.3 ft (1 meter) from the system.
; It is recommended operating distance between Party Audio systems is closer than 32.8 ft (10 meters). 08 LICENSE The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Samsung Electronics Co., Ltd. is under license. Other trademarks and trade names are those of their respective owners. Qualcomm aptX is a product of Qualcomm Technologies, Inc. and/or its subsidiaries. Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries. aptX is a trademark of Qualcomm Technologies International, Ltd., registered in the United States and other countries. ENG - 19 11 SPECIFICATIONS AND GUIDE Specifications Model Name USB1/USB2 Weight Dimensions (W x H x D) Operating Temperature Range Operating Humidity Range AMPLIFIER Rated Output power Tweeter Middle Woofer MX-T70 USB1: 5V/2.1A USB2: 5V/0.5A 58.4 lbs (26.5 kg) 18.2 x 34.8 x 17.9 inches
(463.0 x 884.0 x 455.0 mm)
+41F to +95F (+5C to +35C) 10 % ~ 75 %
150W x 2, 12 ohm 300W x 2, 6 ohm 600W x 1, 3 ohm NOTES Samsung Electronics Co., Ltd reserves the right to change the specifications without notice. Weight and dimensions are approximate. Dispose unwanted electronics through an approved recycler. To find the nearest recycling location, go to our website: www.samsung.com/recycling or call 1-800-SAMSUNG. ENG - 20 LIMITED WARRANTY TO ORIGINAL PURCHASER This SAMSUNG brand product, as supplied and distributed by SAMSUNG and delivered new, in the original carton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and workmanship for a limited warranty period of:
One (1) Year Parts and Labor*
(*90 Days Parts and Labor for Commercial Use) This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the United States. To receive warranty service, the purchaser must contact SAMSUNG for problem determination and service procedures. Warranty service can only be performed by a SAMSUNG authorized service center. The original dated bill of sale must be presented upon request as proof of purchase to SAMSUNG or SAMSUNGs authorized service center. Transportation of the product to and from the service center is the responsibility of the purchaser. SAMSUNG will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty period specified above. All replaced parts and products become the property of SAMSUNG and must be returned to SAMSUNG. Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is longer. SAMSUNGs obligations with respect to software products distributed by SAMSUNG under the SAMSUNG brand name are set forth in the applicable end user license agreement. Non-SAMSUNG hardware and software products, if provided, are on an AS IS basis. Non-SAMSUNG manufacturers, suppliers, publishers, and service providers may provide their own warranties. This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, and except to the extent otherwise expressly provided for in this statement, noncommercial use of this product, and shall not apply to the following, including, but not limited to: damage which occurs in shipment; delivery and installation; applications and uses for which this product was not intended; altered product or serial numbers;
cosmetic damage or exterior finish; accidents, abuse, neglect, fire, water, lightning or other acts of nature; use of products, equipment, systems, utilities, services, parts, supplies, accessories, applications, installations, repairs, external wiring or connectors not supplied and authorized by SAMSUNG, or which damage this product or result in service problems; incorrect electrical line voltage, fluctuations and surges; customer adjustments and failure to follow operating instructions, cleaning, maintenance and environmental instructions that are covered and prescribed in the instruction book; product removal or reinstallation; reception problems and distortion related to noise, echo, interference or other signal transmission and delivery problems. SAMSUNG does not warrant uninterrupted or error-free operation of the product. THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY AFTER THE EXPRESS WARRANTY PERIODS STATED ABOVE, AND NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH RESPECT TO THIS PRODUCT SHALL BE BINDING ON SAMSUNG. SAMSUNG SHALL NOT BE LIABLE FOR LOSS OF REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST SAMSUNG BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG AND CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, PURCHASER ASSUMES ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO PURCHASER AND PURCHASERS PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT SOLD BY SAMSUNG NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF SAMSUNG. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT, IS NONTRANSFERABLE AND STATES YOUR EXCLUSIVE REMEDY. Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. To obtain warranty service, please contact SAMSUNG customer care center. The benefits of this Limited Warranty extend only to the original purchaser of Samsung products from an authorized Samsung reseller. THIS LIMITED WARRANTY SHALL NOT APPLY TO ANY SAMSUNG PRODUCTS PURCHASED FROM UNAUTHORIZED RESELLERS OR RETAILERS, EXCEPT IN STATES WHERE SUCH RESTRICTION MAY BE PROHIBITED. For a list of Samsung authorized retailers, please go to:
http://www.samsung.com/us/peaceofmind/authorized_resellers.html. Certi cation model only QUESTIONS OR COMMENTS?
AREA IN THE US CALL OR VISIT US ONLINE AT WRITE 1-800-SAMSUNG
(726-7864) www.samsung.com/us/support Samsung Electronics America, Inc. 85 Challenger Road Ridge eld Park, NJ 07660 2019 Samsung Electronics Co., Ltd. All rights reserved. 72-WT70ZA-DFUB1-SS
This product uses the FCC Data API but is not endorsed or certified by the FCC