app
s
|
Applicant Information
|
|
1 2 3
|
Effective |
2019-05-02
|
1 2 3
|
Applicant's complete, legal business name |
Samsung Electronics Co Ltd
|
1 2 3
|
FCC Registration Number (FRN) |
0005810205
|
1 2 3
|
Physical Address |
19 Chapin Rd., Building D
|
1 2 3
|
Pine Brook, New Jersey 07058
|
1 2 3
|
United States
|
|
app
s
|
TCB Information
|
1 2 3
|
TCB Application Email Address |
u******@sgs.com
|
1 2 3
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
app
s
|
FCC ID
|
1 2 3
|
Grantee Code |
A3L
|
1 2 3
|
Equipment Product Code |
CCBP730Q
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
1 2 3
|
Name |
J**** C****
|
1 2 3
|
Title |
General Manager
|
1 2 3
|
Telephone Number |
973-8********
|
1 2 3
|
Fax Number |
973-8********
|
1 2 3
|
E-mail |
j******@samsung.com
|
|
app
s
|
Technical Contact
|
1 2 3
|
Firm Name |
SGS Korea Co., Ltd
|
1 2 3
|
Name |
H******** Y******
|
1 2 3
|
Physical Address |
4, LS-ro, 182 beon-gil
|
1 2 3
|
Gunpo-si, 15807
|
1 2 3
|
South Korea
|
1 2 3
|
Telephone Number |
82314********
|
1 2 3
|
Fax Number |
82704********
|
1 2 3
|
E-mail |
h******@sgs.com
|
|
app
s
|
Non Technical Contact
|
1 2 3
|
Firm Name |
SGS Korea Co., Ltd
|
1 2 3
|
Name |
H******** N****
|
1 2 3
|
Physical Address |
4, LS-ro, 182 beon-gil
|
1 2 3
|
Gunpo-si, 15807
|
1 2 3
|
South Korea
|
1 2 3
|
Telephone Number |
82314********
|
1 2 3
|
Fax Number |
82314********
|
1 2 3
|
E-mail |
h******@sgs.com
|
|
app
s
|
Confidentiality (long or short term)
|
1 2 3 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 3 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 3 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 10/29/2019 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
1 2 3 |
Is this application for software defined/cognitive radio authorization? | No |
1 2 3 | Equipment Class | DTS - Digital Transmission System |
1 2 3 | DSS - Part 15 Spread Spectrum Transmitter |
1 2 3 | NII - Unlicensed National Information Infrastructure TX |
1 2 3 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | WiFi/BT Combo Module |
1 2 3 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
1 2 3 | Modular Equipment Type | Single Modular Approval |
1 2 3 | Purpose / Application is for | Original Equipment |
1 2 3 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
1 2 3 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
1 2 3 | Grant Comments | Power Output listed is conducted. Single modular approval. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). Device is an 802.11a/b/g/n/ac device in a 2x2 Spatial Multiplexing MIMO configuration and enabled for 2.4 and 5 GHz band operations as described in this filing.
This device has 20MHz and 40MHz bandwidth modes |
1 2 3 | Power Output listed is conducted. Single modular approval. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). |
1 2 3 | Power Output listed is conducted. Single modular approval. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). Device is an 802.11a/b/g/n/ac device in a 2x2 Spatial Multiplexing MIMO configuration and enabled for 2.4 and 5 GHz band operations as described in this filing.
This device has 20MHz, 40MHz and 80MHz bandwidth modes |
1 2 3 | Is there an equipment authorization waiver associated with this application? | No |
1 2 3 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
1 2 3
|
Firm Name |
SGS Korea Co., Ltd
|
1 2 3
|
Name |
J**** C********
|
1 2 3
|
Telephone Number |
82-31********
|
1 2 3
|
Fax Number |
+82-3********
|
1 2 3
|
E-mail |
K******@sgs.com
|
|