FCC ID: WQRSHS-3320 Low Power Communication Device Transmitter

User Guide Samsung Touchscreen Door Lock SHS-3320 Please review all included documentation and use the product as intended. Safety precautions must be followed to avoid personal injury or property damage. Touchscreen Door Lock Components & Tools

| Table of Contents Introduction & Helpful Tips 2 Installation 3 Components & Tools 3 Door Preparation 4-5 Installing Lock 6-7 Programming 8 Basic Lock Operation Overview 8 Programming Features & Definitions 9-12 Programming User PIN Codes & User Cards 13-14 Security Functions 15 Miscellaneous 16 Miscellaneous Information 16 Troubleshooting 17-18 User Registration Table 19 Product Specifications 20 Warranty 21-22 Drilling Template 23-25

| Introduction Congratulations on the purchase of your Samsung Touchscreen Door Lock! Your lock has a touch sensitive number display pad and optionally a 13.56MHz Card reader. Up to 70 users can be registered to gain access with unique Codes or Access Cards (supports ISO14443A type). The touchscreen makes it convenient to enter the code and the Randomizer function helps prevent lockpicking using fingerprint traces on the touchscreen. Other convenient functions such as Automatic Locking / Sound Setting / Out-of-Home Security, etc. provide advanced security and peace of mind. You can unlock the door using video intercoms monitor after connecting a Samsung video intercom. (Refer to page 6 for connection diagram to a video intercom).

| Helpful Tips Do not attempt to repair the product yourself. Change your codes regularly to ensure the security of your codes. Minimize the locks exposure to moisture including wet hands and direct contact with liquids. Do not exert excessive force or use sharp instrument on the touchscreen. Insert the batteries according to correct polarity. When the low-battery warning sounds, replace all batteries immediately. Do not mix old batteries with new batteries. Use soft, dry cloth to clean the lock and avoid cleaning with water, alcohol or other chemicals.



Components & Tools Touchscreen Door Lock Installation

| Components & Tools Components Exterior Unit Interior Unit Interior Mounting Plate Strike 4 AA Alkaline Batteries 4 User Cards or Key Fobs User Guide Parts Drawings Screw Pack (4 types) Adjustable Deadbolt

(2-3/8~2-3/4, 60mm~70mm) Magnetic Sensor 3 Keys Exterior Unit Interior Unit Interior Mounting Plate Strike Magnetic Sensor Lock Installation

#2 Phillips screwdriver Drill Adjustable Deadbolt Tools Door Preparation 2-1/8(54mm) hole saw 1(25mm) hole saw 1-3/8(35mm) hole saw 3/8(10mm) drill bit 1/8(2.5mm) drill bit Chisel and hammer



Touchscreen Door Lock

| Door Preparation Step 1. Check the Door Status 1) This lock supports door thickness of 1-7/32 to 1-9/16 (31 to 40 mm). 2) Using the provided lock template, ensure that there are no obstructions that would prevent installing the lock properly. 3) Take note of which orientation the deadbolt will need to be installed, left hand or right hand. Left-handed Door When viewed from the Outside, the hinge is on the left. Right-handed Door When viewed from the Out-

side, the hinge is on the right. Please, be aware of that there has be more than 50mm gap between the door frame and the external power contact to place the 9V battery for temporary access. r e g g i r T t h g R i Left Trigger Right-handed Setting Connect the magnetic sensor to Right Trigger. Left-handed Setting Connect the magnetic sensor to Left Trigger. The hand type is not set by default and it is set to the direction where the magnetic is detected. In order to change the hand type when it is already set, change the connection of the magnetic sensor. And press the [OPEN/CLOSE] button while the magnet is detected. Note: Please, cut the tail of the rubber pad to the direction where magnetic sensor is placed. Step 2. Mark on the Door Check the location and direction of the deadbolt, attach the drilling template (page 23) on the side of the door, and mark on it with a pen. Align the horizontal line across the door. Align the vertical line over the door. Mark the centers of the holes with the drilling template. Mark the centerline of the deadbolt by aligning it with the vertical line.



Touchscreen Door Lock Step 3. Drilling Drill a 2-1/8 (54 mm) diameter hole through the door, as indicated on the template, using a hole saw. Drill a 1-3/8 (35 mm) diameter hole through the door, as indicated on the template, using a hole saw. Drill a 1 (25 mm) mortise hole using a hole saw. Drill strike plate holes using a drill bit (1/8, 2.5 mm). 35mm 25mm 54mm 2.5mm Step 4. Strike Plate Installation 1) Using the template, locate the center horizontal line for the deadbolt hole, which lines up with the center of the 2-1/8 hole, and draw a horizontal line on the door frame to mark where you will make the deadbolt mortise hole. 2) Measure half the thickness of the door. Now, measure that distance from where the door stops at the frame when the door is closed toward the door jamb and mark a straight, vertical line the length of the door strike plate. Draw a horizontal line from the mark you made in Step 1 toward the vertical line. Where both lines cross, make a 1 (25 mm) diameter hole, 1/2 (13 mm) in depth. 3) Align the holes of the strike plate with the vertical line. Trace the outline of the strike plate and mortise with a 1/16 (1.6 mm) indentation. Attach the strike plate with the 2 screws provided.

(T4 x 15: for wooden door, U10-24 x 9: for metal door)



FH+ T4 x 15 Touchscreen Door Lock

| Installing lock Outside Inside 2 3 7 6a Inside Unit Screws 6b 4 5 1 1. Installing the Deadbolt 2. Setting the Blade Deadbolt Screws 3. Installing the Mounting Plate 4. Connecting the Cable Horizontal Blade RIGHT HANDED Vertical Blade LEFT HANDED 3b Mounting Screws(3b, 3c) 3a Mounting Screws(3a) 3c 5. Installing the Magnetic Sensor 3/4(20mm) Connection for Video Intercom(Optional)



Procedures Touchscreen Door Lock 6. Fix screws for the Interior Unit. 1) Align the Interior Unit on to the Interior Mounting Plate, and check that the Thumbturn lever operates correctly.

(Ensure cables are arranged neatly to prevent them from getting entangled or being compressed.) CAUTION : Align the Interior Unit while the Thumbturn Lever is open position.

[Right-handed] [Left-handed]

2) Open the battery cover of the Interior Unit. (There are the screw grooves at the upper left and right corners.) 3) Using two FH+M4 x 8 screws, fasten the upper portion of the Interior Unit (6a). 4) Using two FH+M4 x 8 screws, fasten the lower portion of the Interior Unit (6b). 7. Install 4 Alkaline batteries. A melody will sound when all 4 batteries are installed correctly. CAUTION: Press the [OPEN/CLOSE]

button to check whether the dead bolt works properly. Connection for Video Intercom(Optional) Connect the cable of video intercom to the Interior Unit. SHS-3320 is compatible with SHT-3006 and other Samsung video intercom sys-

tems. 1. Installing the Deadbolt 1) Insert the deadbolt from the side of the door. 2) Fix the deadbolt using two FH+T4 x 25 screws. (T4x25/T4x15: for wooden door, U10-24x9: for steel door) 2. Setting the Blade

(Ensure the Exterior Unit is aligned with the center hole of the deadbolt.) While the deadbolt is in the open position, insert the blade of the exterior unit. In the case of right-handed door, insert the blade horizontally. In the case of left-

handed door, insert the blade vertically. 3. Installing the Mounting Plate 1) Detach the Interior Mounting Plate from the Interior Unit. 2) First, install the two OH+M4 x 22 screws

(3a) 90% of the way. 3) Next, fasten the Interior Mounting Plate with two FH+M5 x 20 screws (3b). 4) Align the Exterior Unit with the Interior Mounting Plate and then fasten the Interior Mounting Plate using two FH+M5 x 20 screws (3c). 5) Tighten all screws on the Interior Mounting Plate 100%. 4. Connecting the Cable 5. Installing the Magnetic Sensor

(page 4) CAUTION: As the magnet fastened to the door-frame may not be detected if the gap between the magnets is too large, use the neck of the magnetic sensor to install the sensor within 3/4(20mm) of the magnet. If the magnet is not detected, automatic lock does not work.



Touchscreen Door Lock Programming

| Basic Lock Operation Overview Opening the Door with a PIN Code The door opens within one second. Touch the

[Touchscreen]. The touchscreen will illu-

minate. (If the Random Se-

curity function is enabled, press illuminated numbers.) the 2 Enter the PIN Code and press the [

Successful:

] button. Ding dong dang dong Failed:

Ding dong ding dong Opening the Door with a Card The door opens within one second. Touch the [Touch-

screen]. Touch the Card reader with an Access Card. Successful:

Ding dong dang dong Failed:

Ding dong ding dong Opening the Door in Double Authentication Mode The door opens within one second. Touch the Card reader with an Access Card. Successful:

Ding dong dang dong Failed:

Ding dong ding dong Touch the

[Touch-

screen]. The touchscreen will illuminate.

(If the Random Security function is enabled, press the 2 illuminated numbers.) Enter the PIN Code and press the [

] button. Successful:

Ding dong Failed:

dong Ding dong ding



| Programming Features Outside Touchscreen Door Lock Inside Touchscreen Open/Close Button Card Reader Thumbturn Lever Emergency Cylinder Restart Button External Power Contact Registration Button Magnetic Sensor Battery Cover Symbols Description Symbols Description Press the [

] button. It is used to complete number entry. Enter the Master PIN Code

(4~12 digits). Factory Default: 1234 Press the Number buttons. Touch the [Touchscreen]. Press the [Registration]

button. It is used to change the PIN Code or set other functions. R: Press the [Registration]

button briefly (~1 second) R5: Press the [Registration]

button for 5 seconds R10: Press the [Registration ]

button for 10 seconds



5 5 10 Touchscreen Door Lock Symbols Description Symbols Description Enter the User PIN Code (4~12 digits). Touch the Card reader with the User Card. Enter the User/Management Number. Can be set from 1 to 70. Repeat the process inside the rectangle. Press the [OPEN/CLOSE]

button. Sound Icon Display. Sound Indicators Sound Description Fur Elise Tiritiritiriririri Ding Ding dong ding dong Ding dong dang Ding dong Low voltage warning sound accompanied with [OPEN/CLOSE] button flashing red. Button input sound Error sound Success sound Input standby sound Toot~ toot~ (10 seconds) Malfunction prevention warning Ti~ ti~ ti~ ti~ (5 minutes) Intrusion Detection/Out-of-home Security warning Too~~t, too~~t Double locking sound 10 Touchscreen Door Lock

| Definitions Double Authentication Mode : This mode requires both User Card and PIN Code to open the door, ensuring more security. However, Master PIN Code can open the door regardless of mode. To enable this mode, more than 1 User Card and PIN Code must be registered. This mode is disabled by default. Double-locking : Double-locking prevents the lock from being unlocked from the outside. You can enable it by using the [OPEN/CLOSE] button. Emergency Power Contact : Continuing to use the lock without replacing batteries when required will lead to the batteries discharging and cause the lock to malfunction. You can open the door by touching the external power contacts on the Exterior Unit with a 9V battery and then touching with the Card or entering the PIN Code. Indicator Lamp : Indicates the operational status when the Card is being read or the lock is in operation. Intrusion Detection Function : When the Interior Unit is forcibly detached while the door is locked, it is detected by the magnetic sensor and an alarm is sounded. (The function is not activated when the magnet is not used.)The Intrusion Detection function is a basic function and cannot be enabled or disabled. Locking Mode (Auto/Manual) : You can enable or disable the function for locking the door automatically when it is closed. The factory default is Auto mode.

- Auto: The door is locked automatically 2 seconds after it is closed. However, it does not function if the magnet is not used or the batteries are completely discharged.

- Manual: When the door does not lock automatically when it is closed, touch the [Touchscreen]

or the [OPEN/CLOSE] button on the Interior Unit will lock the door. Low Voltage Indicator : Refers to the state when the operating voltage of the lock is lower than the standard voltage, and activates the Low Voltage Alarm (Fur Elise) to indicate that the batteries need to be replaced. Use the Emergency Power when the batteries are completely discharged. Magnetic Sensor : Detects the opening and closing of the door. Malfunction Prevention Function (Mischief Prevention Function) : When more than 5 failed authentication attempts with unregistered PIN Codes/Cards occur, a warning sounds for 10 seconds, and the lock stops operating for 3 minutes. While lock operation is stopped, a beep is sounded every 10 seconds and the lock is activated again automatically after 3 minutes. The Malfunction Prevention function is a basic function and cannot be enabled or disabled. Thumbturn Lever : When the batteries are completely discharged, this device is used to me-

chanically lock or unlock the door from inside. Master PIN Code : You can enter only one Master PIN (4-12 digits) Code. You can register the User PIN Codes/Cards after authenticating with the Master PIN (4-12 digits) Code. You can open the door with the Master PIN Code, and the factory default is 1234. OPEN/CLOSE Button : A one-touch button to open the locked door. (It is also used to lock the door from inside in the Manual locking mode.) Out-of-Home Security Function : This function prevents intrusions from outside when no one is home. Pressing the [OPEN/CLOSE] button while the Out-of-Home function is enabled sounds an alarm. You can enable this function by touch of a certain button. 11 Touchscreen Door Lock Random Security Function : This mode prevents the disclosure of the PIN Code by enter-

ing the PIN Code after authenticating 2 arbitrarily selected numbers. When the buttons for 2 arbitrarily selected numbers are illuminated, pressing the 2 illuminated buttons illuminates the whole touchscreen. You can enable or disable the Random Security function. This function is enabled by default. Registration Button : This button is used to change Master PIN Code/User PIN Codes/User Cards or the lock settings. It is found below the battery cover of the Interior Unit. The length of time the [Registration] button is pressed varies depending on the function. Resetting : Deletes all registered information and restores the factory default. After resetting, change the Master PIN Code for security. Restart Button : This button resets the lock when the lock stops functioning. Registered infor-

mation is not deleted. Sound Setting : The volume during the input of numbers and opening or locking of the door can be set from Level 0 ~ Level 3. The sound is muted at Level 0 and is at maximum volume at Level 3. The registration mode operates at Level 2 regardless of the sound setting. User Card : You can register up to 70 User Cards including the User PIN Codes. You can open the door with a User Card. User/Management Number : It is the same number as the registered users address and can be set from 1 to 70. The User Number should be managed with caution as it is used to register or delete User PIN Codes/Cards. User PIN Code : You can register up to 70 User PIN Codes (4-12 digits) including the User Cards. You can open the door with a User PIN Code. Scope of Master, User Settings Factory Default Settings Master User Function Factory Default Master PIN Code Volume User PIN Code/Card Locking Mode Out-of-home Security Function Double-locking Random Security Double Authentication Mode 1234 Level 2 None Auto Disabled Disabled Enabled Disabled Opening the Door Setting Up the Sound Changing Master PIN Code Registering User PIN Code/Card Deletion of User PIN Code/Card Setting the Locking Mode Setting Out-of-home Security Setting Double-locking Setting Random Security Factory Reset Setting the Volume Setting the Double Authenti-

cation Mode 1

Touchscreen Door Lock

| Programming User PIN Codes & User Cards Note: Pressing the [Registration] button is only available while the door is open.

(Deadbolt must be unlocked.) Maximum number of user registration is 70.

(User PIN Codes, User Cards, Key Fobs) Changing the Master PIN Code Open the battery cover of the Interior Unit and press the

[Registration] button briefly. Ding dong When the touchscreen is illuminat-

ed, enter the current Master PIN Code (default is 1234) and press the [

] button. Successful:

Failed:

Ding dong ding dong Ding dong Enter the new Master PIN Code and press the [

] button. Ding dong dang Ding dong ding dong Successful:

Failed:

Note: Master PIN Code must be 4~12 digits. Registering a User PIN Code Open the bat-

tery cover of the Interior Unit and press the [Reg-

istration] button briefly. Ding dong is When the touch-

illumi-

screen nated, enter the current Master PIN Code is 1234) and press the [

] button. Successful:

Ding dong

(default Failed:

dong ding dong Ding Enter another User Number or press the

[Registration]

button to quit.

] button. Enter a User Number

(1~70) to register the User PIN Code and press the [

*Choose a User Number that has not already been used. Successful:

Ding dong Failed:

dong ding dong Ding Enter a new User PIN Code and press [

Successful:

] button. Ding dong dang Ding Failed:

dong ding dong Note: User PIN Code must be 4~12 digits. 1

Registering a User Card Touchscreen Door Lock Open the battery cover of the Interior Unit and press the [Registra-

tion] button briefly. Ding dong When the touchscreen is il-

luminated, enter the current Master PIN Code (default is 1234) and press the

[

Successful:

Failed:

dong Ding dong ding Ding dong

] button.

] button. Enter a User Number (1~70) to register the User Card code and press the [

* Choose a User Number that has not already been used. Successful:

Ding dong Failed:

dong Ding dong ding Touch the Card reader with the Card to regis-

ter. Ding dong dang Enter another User Number or press the [Registration]

button to quit. Deleting User PIN Code / User Card Open the battery cover of the Interior Unit and press and hold the [Registra-

tion] button for 5 seconds. Ding dong Ding ding Enter the Master PIN Code and press the [

Successful: Ding dong Failed:

Ding dong ding dong

] button. Enter the User Number (1 to 70) of the User PIN Code or Card to be deleted and press the [

Successful:

Failed:

] button. Ding dong dang Ding dong ding dong 1

Touchscreen Door Lock

| Security Functions Setting the Out-of-Home Security Function When the door is closed

[

light up.

] of the touchscreen will Press the [

3 seconds.

] button within Ding dong dang Setting Double Locking Releasing Double Locking Press the [OPEN/

CLOSE] button for 5 seconds while the door is locked. Press the [OPEN/

CLOSE] button or turn the Thumbturn lever. Ding dong dang Ding dong ding dong Additional Functions 0 1 2 3 4 5 6 7 9 Mute Sound 1 Sound 2 Sound 3 Enable Double Authentication Mode Auto/Manual locking Disable Double Authentication Mode Enable Random Security 1

Touchscreen Door Lock Miscellaneous

| Miscellaneous Information Reset to Factory Default Resetting the lock will delete all registered information. Note: After Reset, let the sensor detect the magnet to set the hand type again. All registered Master and user data will be deleted, and the lock will be reset to default settings.(Refer to the Program section on Page 12 for default values.) Press the [Registration] button for 10 sec-

onds. Successful:

Ding dong Ding ding Ding ding 9V Battery Emergency Power Enter the current Master PIN Code, and press the [

Successful:

Failed:

Ding dong dang Ding dong ding dong

] button. Note: Please, be aware of that there has be more than 50mm gap between the door frame and the external power contact to place the 9V battery for temporary access. Continuing to use the lock without replacing the batteries when required will lead to lock malfunction. Touching a 9V DC battery to the external power contacts on the under-side of the Exterior Unit will allow for temporary access (continue touching the battery to the contacts until the lock is open). Restart Function Note: Restarting does not delete registered information. If there is no response after touching the [Touchscreen], use a pin to press the [Restart] button on the left of the external power contact of the Exterior Unit. 1

1

Touchscreen Door Lock

| Troubleshooting When the lock doesnt function correctly, please check the items below. If you cant resolve the problem, please contact the nearest service center. Problem Resolution Reference There is no power. Check if the batteries are inserted in the correct polarity. Check that the batteries have a full charge. Check that the Exterior Unit cable has not come loose.

-

I cant change the Master PIN Code. There was a delay while changing the PIN Code. The touchscreen must be illuminated when changing the PIN Code. Also, after entering the first digit, the next digit must be entered within 10 seconds. Replace the batteries if they are discharged. Refer to the Changing the Master PIN Code section in the user manual and try again. Ensure that the Master PIN Code is 4~12 digits long. I cant register the User PIN Code. The User Number has already been used. Delete the de-

sired User Number and re-register. Ensure that the User PIN Code is 4~12 digits long. I cant register the User Card. I entered the PIN Code and pressed the [

but the door wont open.

] button, The User Number has already been used. Delete the de-

sired User Number and re-register. Ensure that the card is touched to the card reader within 10 seconds of entering the User Number. Check that the registered PIN Code was entered cor-

rectly. If the touchscreen illumination turns off while entering the PIN Code, the button input was not registered. Touch the

[Touchscreen] to illuminate the touchscreen and enter the PIN Code again from the beginning. (The touchscreen illumination is turned off automatically if there is no input within 5 seconds.) I cant unlock the door with my Card. The Card is either unregistered or unrecognized. The Card must touch the Card reader correctly. I cant unlock the door with my PIN Code or Card. Check if the Double-locking function has been enabled. When this function is enabled, the lock will not open with a PIN Code or Card.Touch the [Touchscreen] when the Double-locking function is enabled causes the lock to emit a Too~~t, too~~t sound. Page 13 Page 13 Page 14 Page 13 Page 14 Page 15 1

Touchscreen Door Lock My PIN Code or Card is authenti-

cated, but the door wont open. The door wont lock automatically when I close it. I hear the Too~~t, too~~t warning sound when I touch the [Touch-

screen]. The lock issues a different melody

(Fur Elise) when I activate it. There is no response when I touch the [Touch-

screen]. The lock may be malfunctioning. Please contact service center.

-

Check if Auto Locking is set. When Manual Locking is set, touching the [Touchscreen] locks the door. If the door doesnt lock automatically when Auto Locking is set, then the lock has been installed incorrectly. Page 15 The Auto Locking function is not activated when the bat-

teries are completely discharged. Check if the batteries are discharged. When the Double-Locking function is enabled, touching the

[Touchscreen] issues this warning sound. Check if Double-

locking is enabled, disable the function and try again. Page 15 The sound indicates that it is time to replace the batteries. Replace with new batteries within a week. Page 10 Use a pin to press the hole on the right of the external power contact of the Exterior Unit. If doing the above does nothing, contact the service cen-

ter. Page 16 1

Touchscreen Door Lock

| User Registration Table Management No. PIN CODE/CARD User Name Management No. PIN CODE/CARD User Name 1

Touchscreen Door Lock

| Product Specifications Item Voltage Emergency Power Source Operation Method Weight Product Dimensions Specifications 4 AA Alkaline 1.5V Batteries (LR6) (6V) 9V Battery (6LF22) (not included) Electronic Control Method (PIN Code entry or Card reading) 1.8Kg (including both inside and Exterior Unit) Exterior Unit Interior Unit 68.0 mm (W) x 180.0 mm (H) x 29.5 mm (D) 2.67 inch (W) x 7.08 inch (H) x 1.16 inch (D) 68.0 mm (W) x 180.0 mm (H) x 36.1 mm (D) 2.67 inch (W) x 7.08 inch (H) x 1.42 inch (D) The content of this manual is subject to change without prior notice to the user in order to enhance the performance of the product.

| FCC NOTICE NOTE : This equipment has been tested and found to comply with the limits for a Class B digital de-

vice, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is con-

nected.

- Consult the dealer or an experienced radio/TV technician for help. CAUTION : Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the users authority to operate the equipment.

0 Touchscreen Door Lock LIMITED PRODUCT WARRANTY Installation of the product is considered acceptance of warranty conditions SEOUL COMMTECH CO., LTD (SEOUL COMMTECH) warrants its products to be free from manufacturing defects in materials and workmanship for 12 months from the date of purchase. SEOUL COMMTECH will, within said period, at its option, repair or replace any product failing to operate correctly without charge to the original purchaser or user. This warranty shall not apply to any equipment, or any part thereof, which has been repaired by others, improperly installed, improperly used, abused, altered, damaged, subjected to acts of God, or on which any serial numbers have been altered, defaced or removed. SEOUL COM-

MTECH does not warrant the performance or sale conditions of the seller/installer. There are no warranties, express or implied, which extend beyond the description on the face hereof. There is no express or implied warranty of merchantability of a warranty of fitness for a particular purpose. Additionally, this warranty is in lieu of all other obligations or liabilities on the part of SEOUL COMMTECH. Any action for breach of warranty, including but not limited to any implied warranty of merchant-

ability, must be brought within the six months following the end of the warranty period. In no case shall SEOUL COMMTECH be liable to anyone for any consequential or incidental damages for breach or this or any other warranty, express or implied, even if the loss or damage is caused by the sellers own negligence or fault. SEOUL COMMTECH shall have no obligation under this warranty, or otherwise, if the product has been repaired by others, improperly installed, improperly used, abused, altered, damaged, subjected to accident, nuisance, flood, fire or acts of God, or on which any serial numbers have been altered, defaced or removed. SEOUL COMMTECH and its distributor will not be respon-

sible for any dismantling, reassembly or reinstallation charges. This warranty contains the entire warranty. It is the sole warranty and any prior agreements or representations, whether oral or written, are either merged herein or are expressly cancelled. SEOUL COMMTECH neither as-

sumes, nor authorizes any other person purporting to act on its behalf to modify, to change, or to assume for it, any other warranty or liability concerning its products. In no event shall SEOUL COMMTECH be liable for an amount in excess of SEOUL COMMTECHs original selling price of the product, for any loss or damage, whether direct, indirect, incidental, consequential, or oth-

erwise arising out of any failure of the product. Sellers warranty, as hereinabove set forth, shall not be enlarged, diminished or affected by and no obligation or liability shall arise or grow out of Sellers rendering of technical advice or service in connection with Buyers order of the goods furnished hereunder. SEOUL COMMTECH recommends that the entire system be completely tested weekly. Warning: Despite frequent testing, and due to, but not limited to, any or all of the following;

criminal tampering, electrical or communications disruption, it is possible for the system to fail to perform as expected. SEOUL COMMTECH does not represent that the product/system may not be compromised or circumvented; or that the product or system will prevent any personal injury or property loss by burglary, robbery, fire or otherwise; nor that the product or system will in all cases provide adequate warning or protection. A properly installed and maintained alarm may only reduce risk of burglary, robbery, fire or otherwise but it is not insurance or a guarantee that these events will not occur.

1 Touchscreen Door Lock Consequently, seller shall have no liability for any personal injury, property damage, or other loss based on a claim the product failed to give warning. Therefore, the installer should in turn advise the consumer to take any and all precautions for his or her safety including, but not limited to, fleeing the premises and calling police or fire depart-

ment, in order to mitigate the possibilities of harm and/or damage. SEOUL COMMTECH is not an insurer of either the property or safety of the users family or employees, and limits its liability for any loss or damage including incidental or consequential damages to SEOUL COMMTECHs original selling price of the product regardless of the cause of such loss or damage. Some states do not allow limitations on how long an implied warranty lasts or do not allow the exclusion or limitation of incidental or consequential damages, or differentiate in their treatment of limitations of liability for ordinary or gross negligence, so the above limitations or exclusions may not apply to you. This Warranty gives you specific legal rights and you may also have other rights which vary from state to state. In case of the product defect, contact our authorized Customer Service Center. In order to exer-

cise the warranty, you must contact our authorized Customer Service Center and obtain a proper RMA # - the product must be returned to our authorized Customer Service Center at users ship-

ping expense and the replacement product will be shipped back at our expense. For product service, the product in all cases must be accompanied by below warranty form. Cus-

tomer must ask the reseller or installer to fill out the warranty form indicated below, otherwise the product warranty may be considered void. Visit our website at www.scommtech.com/en and go to Support menu to find the contact informa-

tion of our worldwide distributors. Date of Purchase or Installation :

(MM/DD/YY) Name, telephone and full address of purchaser :

Stamp or Signature of authorized reseller / installer Product Code and Serial Number :



| Drilling Template Sheet : 2-3/8(60mm) Backset Touchscreen Door Lock L a t c h H o e

. B o r e 1

"

D A I l

. 2

-

3 8

"

/

/

5 3 2

"

D e e p 2

-

1

/

8

"



1

-

3

/

8

"

Touchscreen Door Lock



| Drilling Template Sheet : 2-3/4(70mm) Backset Touchscreen Door Lock L a t c h H o e

. B o r e 1

"

D A I l

. 2

-

3 4

"

/

/

5 3 2

"

D e e p 2

-

1 8

"

/

1

-

3 8

"

/

S T E P 2 P u l l t o e x t e n d t j A d u s t i n g D e a d b o l t S T E P 1 R o t a t e f o r w a r d o 2

-

3 4

/

S T E P 3 R o a e t t b a c k



Touchscreen Door Lock



Product information and customer service contact SEOUL COMMTECH SEOUL COMMTECH Co.,Ltd., reserves the right to change availability of any item in this catalog, its design, construction, and/or its materials. Copyright 2011, SEOUL COMMTECH Co.,Ltd. All right reserved. Reproduction in whole or in part without the express written permission of SEOUL COMMTECH is prohibited. GC68-01765A ED:01