Screeneo Innovation SA Remote Control users manual Application equipment Home Projector Hardware Part 1MCU 2Battery 3Indication light 4IR LED RTL8762AG 2 pcs AAA batteries No Yes Compatable operating system 1Android 4.4+ (or Higher) 2Windows RT 8.1 (or Higher) 3Windows 8 (or Higher) Main function 1. Keypad function Keypad function emit IR code only under condition of IR mode. OK button emits BT code but other buttons emit IR code under condition of BT/Air mouse mode. 2. Air mouse function When press on air mouse button then air mouse function switch on, press on air mouse button again then air mouse function switch off, at the same time button emit IR code. Under condition of air mouse function switch on the OKbutton deem as left button of mouse.If the remote no move for 60 seconds then mouse function switch off then remote control standby to save energy of battery. Code pairing 1. PPA 5750 Air Mouse Firstly artifically pair code, after blue tooth pairing succeed then RC can pair code automatically. BT remote name: PPA 5750 Air Mouse 2. Pairing keys Pairing buttons: Press on FOCUS+ and FOCUS- keys for more than 3s Switch 1. (Power ON/OFF -- button POWER) Page1 www.xmhello.com 0592-5657230 Screeneo Innovation SA This means the remote wakes up when pressing the Power button 2. (Bluetooth/Air mouse Switch --- controlled by air mouse button) Battery energy detection The remote detect the energy of battery, projector server read voltage of remote control via connecting blue tooth. When battery energy is less than 30% the information will be shown on screen of projector to remind user to change battery Key codeIR keycodeProtocol NEC 0x8019 Key on SCH
(
Icon on Remote Description DOWN down IR BT IR Key code NEC IR 0x8019 IR, mouse off 16 S01 S05 S06 S07 S08 S12 S13 S14 S15 S19 S20 S21 S22 S26 S27 S28 S29 S33 S34 S35 S36 S41 S42 Page2 Gyo-mouse Empty Rat IR mouse on IR mouse off FC MENU BACK HOME MUTE VOL+
BT menu BACK HOME MUTE VOL+
BT GREEN GREEN YELLOW YELLOW BLUE RED BLUE RED FOCUS -
FOCUS -
Auto-Focus Auto-Focus FOCUS+
FOCUS+
VOL-
UP VOL-
UP RIGHT RIGHT OK LEFT OK LEFT OPTION OPTION POWER POWER SOURCE SOURCE IR IR IR IR IR IR IR IR IR IR IR IR IR IR IR IR IR IR IR IR IR IR IR IR IR IR IR IR IR IR IR IR IR IR IR 18 1A 19 1F 1C 37 33 34 35 32 1E 31 48 46 IR, mouse off 17 IR, mouse off 51 Mouse_left 50 IR, mouse off 4F IR IR IR 36 10 1D www.xmhello.com 0592-5657230 Screeneo Innovation SA 1. Air mouse function and BT button definition 1 Air mouse button is switch button between IR and BT which emit IR code at same time. 2 OK buttons is left button of mouse under condition of BT mode But under condition of IR mode OK button emit IR code 3Navigation buttons is switch-off button of mouse Under condition of BT mode navigation buttons can switch off mouse function and emit IR code at the same time. 4Other buttons always emit IR code Press On Gyro Mouse button: then Gyo-mouse function swith on. Switch Off Gyro Mouse function: Press on Gyo-mouse button or Press on one of the navigation buttons (left, right, up, down.) Switch on Mouse cursor visible, <OK> button acts like left button of a PC mouse, NO IR transmission. Switch off gyro: Mouse cursor not visible, <OK> button resume OK function Via IR transmission. If Mouse no move for more than 60s, mouse function is deactivated. 2. IR buttons definition ProtocolNEC system code0x8019 Carrier frequency37.9kHz2%
Code table refer to Page 2-3 Page3 www.xmhello.com 0592-5657230 Screeneo Innovation SA The appearance Frequency bands Maximum output power BT BLE(EIRP)
-5.18 dBm Page4 www.xmhello.com 0592-5657230 Screeneo Innovation SA CE Statement 1. The operating temperature of the EUT cant exceed 35 and shouldnt be lower than 5. 2. The device complies with RF specifications when the device used at 0mm form your body. Hereby, Screeneo Innovation SA. declares that this product is in compliance with essential requirements and other relevant provisions of Directive 2014/53/EU. This product is allowed to be used in all EU member states. FCC Statement 15.19 Labeling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation. 15.21 Information to user. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 15.105 Information to user. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.For body worn operation, this device has been tested and meets FCC RF exposure guidelines. When used with an accessory that contains metal may not ensure compliance with FCC RF exposure guidelines. Page5 www.xmhello.com 0592-5657230