all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual | Users Manual | 1.47 MiB | August 01 2014 | |||
1 | Cover Letter(s) | August 01 2014 | ||||||
1 |
|
External Photos | External Photos | 83.82 KiB | August 01 2014 | |||
1 | ID Label/Location Info | August 01 2014 | ||||||
1 | Internal Photos | August 01 2014 | ||||||
1 | RF Exposure Info | August 01 2014 | ||||||
1 | Cover Letter(s) | August 01 2014 | ||||||
1 | Test Report | August 01 2014 | ||||||
1 | Test Setup Photos | August 01 2014 |
1 | User Manual | Users Manual | 1.47 MiB | August 01 2014 |
Part Number: XXXXXX, REV A 11/2013 KIA MOTORA ARS CALL CENTER NUMBER 1-855-225-7344(US) 1-877-542-2886(CA) Smart Key REMOTE START OWNERS GUIDE WARNING It is the responsibility of the vehicle operator to ensure that their vehicle is parked in a safe and responsible manner. 1. When leaving the vehicle, it is the user' s responsibility to ensure that the gearshift lever is in "Park" in order to avoid accidents upon remote starting. (Note: Make sure that the automatic vehicle cannot start in "Drive".) 2. It is the user' s responsibility to ensure that the remote starter is disabled or put into valet mode before servicing. FCC This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. IC This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. 1 2 REMOTE START INTRODUCTION OWNERS GUIDE Congratulations on your purchase of a Kia Remote Start System Featuring PowerCode Technology. This easy-to-
use manual details the operationg instruction and benefits of the Remote Start System. Should you have questions regarding this system that this manual does not address, please contact your local Kia dealer. TABLE OF CONTENTS:
Using the remote control Description of Remote Appearance Button Functions Vehicle Presets Heater Windshield Wipers, Radio & Headlights Changing the Remote Control Transmitter Battery Remote-Starting your Vehicle Remote-Starting Driving Off Remote Starter Features Valet/Service Mode Panic Mode Advanced Features: Installation
-programmable Options Engine Run Time setting Light Blinking during remote engine start Troubleshooting Poor Transmitting Range LIMITED THIRY-SIX(36)MONTHS OR 60,000KM WARRANTY Vehicle Presets Heater When leaving the vehicle it is recommended to preset the accessory controls in preparation for the Next remote start. Settings for the blower motor(fan),front and rear (if equipped),should not be left on HIGH.It is recommended to leave the settings on LOW or MEDIUM instead. Windshield Wipers, Radio & Headlights Certain vehicles require the radio and / or windshield wipers and / or headlights circuits to become energized while running under remote start. When leaving the vehicle you must ensure that the windshield wipers and headlights switches are OFF. Leaving the headlights switch ON on certain types of vehicles could cause them to remain ON even after remote starter shutdown, resulting in a dead battery. Using the remote control Description of Remote Appearance Arming/Disarming Note: Tap the button 1 time on the remote control transmitter to arm the vehicle. For disarming, tap the button two times PANIC:
Personal Protection Alarm Note: Press the button for 4 seconds Lock, Unlock and Remote starting icon is displaying with One LED color. START/STOP:
Note : Remote Engine Start -
Tap the button 1 time and then press the button for 2 seconds within 3 seconds. Remote Engine Stop - Press the button for 2 seconds
Button Functions Button Image Button LED Feature Tap 1 time Tap 2 times 2 seconds 4 seconds Lock Unlock Remote start/stop PANIC 3 4 Changing the Remote Control Transmitter Battery The 3-Volt Lithium battery X 2EA(Model: CR2025) supplied in your remote control transmitter will last approximately three years, depending on usage. When the battery begins to weaken, you will notice LED no display or a decrease in range or distance from the vehicle that your remote control will operate. Replacement batteries are available at local electronics stores. Following the instructions below to change the remote control battery 1. You may use a coin to pry the remote control halves apart 2. Remove the old battery and replace with a new one 3. Be sure to observe the (+) sign when inserting the new battery. 4. Before assembling transmitter case, you should test the remote control.
Note: Recycle or dispose of the old battery according to local laws or regulations. Remote-Starting your Vehicle Remote-Starting For REMOTE Start KEY Fob 1. Tap button one time and Lock LED will display. And then press button for 2 seconds within 3 seconds. 2. Remote Stop - Press button for 2 seconds. If your vehicle does not start at the first attempt, the system will shut down, wait a few seconds and try to start the engine again. There will be 3 start attempts before the system gives up. For OE REMOTE 1. Tap button and tap or button shortly within three(3) seconds. Engine start is not available for five seconds after doors open. 2. To stop the engine, tap or button shortly for a 1/2 second Note: When remote engine start using OE smart key, valid communication range will be max 30-50 meters
(Same as OE smart key range validity and it can be different from vehicle types) Driving Off With the vehicle running remotely, tap the button 2 times to disarm the OEM Starter Kill and/or the OEM alarm and unlock the doors. Enter the vehicle and do the following:
1. Turn the ignition key to the IGNITION ON (RUN) position.
(Do not turn the key to the CRANK position while the engine is running. This would cause the starter motor to reengage.) 2. Press the brake pedal to disengage the remote starter unit. With the vehicle key is in the IGNITION ON position, press the brake pedal or 30 seconds passes, vehicle is ready to drive. Note: In remote engine start status, engine will be deactivated according to following conditions.
- Open the door and 30 seconds is passed.
- Press brake pedal without key is in IGNITION ON position. 5 6 Remote Starter Features Valet/Service Mode Remote Starter Features Panic Mode For REMOTE Start KEY Fob Valet/Service mode is used to prevent the system from unexpectedly starting the engine while being serviced. When your vehicle is in Valet Mode, the remote starter functionalities are disabled. If the vehicle needs to be serviced, or if you park it indoors, the Valet Mode will prevent the engine from being remote-started accidentally. Any of the following features will put your remote car starter into Valet Mode :
Remote Valet:
This feature allows you to put your system into Valet Mode by using the transmitter. To Engage Valet Mode/Service Mode:
Turn the Ignition key to the ON position, press and hold brake pedal and then refer to following activation Remote Valet:
Press button for 2 seconds. If the vehicle is in valet mode, light will flash one time. To Exit Vale Mode/Service mode(Return the system to its normal operating mode):
Turn the Ignition key to the ON position, press and hold brake pedal and then refer to following activation Remote Valet:
Press button for 2 seconds If the vehicle is out of valet model, light will flash two times In an emergency situation, you can activate panic mode by pressing and hold the button for more than 4 seconds the parking light start flashing and the horn starts honking. If the vehicle is already started remotely, the engine will shutdown automatically before setting off the horn. You can stop the horn by pressing either the button 1 time or tap the button two times. Furthermore, the panic mode can be stopped by activating Valet Mode (previous section). Note : Panic Mode will automatically shut down after 30 seconds. Advanced Features: Installation-programmable Options The Remote Car Starter was designed with flexibility and OEM integration in mind. With its programmable options, this unit can virtually control nearly any electrical system in your vehicle. Caution: The programming of your system should be left to a Kia professional. Changing any one of the settings may affect the operation of your Remote Car Starter. 7 8 Advanced Features: Installation-programmable Options Troubleshooting Poor Transmitting Range Engine Run Time setting Option Setting Condition Disarm the vehicle with remote control transmitter.(Unlock) Driver s door must be physically Open, Engine Stop, Ignition ON, Trunk Open and Hood Open. Option Setting Instruction Under option setting condition, press button for 2 seconds. Light and Horn of vehicle will activate according to Engine Run Time option. Light + Horn activation Time 1 time 2 times 10 Minutes (Default) 5 Minutes Light Blinking during remote engine start Option Setting Condition Disarm the vehicle with remote control transmitter.(Unlock) Driver s door must be physically Open, Engine Stop, Ignition ON, Trunk Open and Hood Open. Option Setting Instruction Under option setting condition, press button for 2 seconds. Light and Horn of vehicle will activate according to Light Blinking during remote engine start. Light + Horn activation Blink 1 time 2 times Blink OFF (Default) Blink ON 9 10 Many factors may affect the operating range of the transmitter. Some of these are:
The condition of the battery in the transmitter. The operating environment (for example: downtown radio-frequency noise, airports, cellular Phone towers ). Metal: any type of metal will affect operating range. This includes the vehicle itself. The shape of the vehicle can affect range as well (vans in general have less range). The shape of the roof and A-pillars brings about considerable radio-frequency deflection(in This case, the signal from the remote control).As a result, the direction in which the vehicle is Facing in relation to the remote control can affect the range. Straight on (standing in front of The vehicle) generally gives you the greatest range; the second best performance if from the Back. Using the remote control from either side of the vehicle will usually give the lowest range. The range will be significantly lower in a crowded parking lot than in open space. Always hold the transmitter high, approximately at shoulder height. LIMITED THIRY-SIX(36)MONTHS OR 60,000KM WARRANTY LIMITED THIRY-SIX(36)MONTHS OR 60,000KM WARRANTY The manufacturer warrants to the consumer purchaser only, that the remote starter (control box, bypass module, transmitter, antenna, ignition T-harness, and transponder T-harness; collectively referred to herein as Unit) shall be free from defects in material and workmanshiop for a period of thirty-six (36)-months from the date of original retail delivery of the Unit, date of fist use, or 60,000KM, whichever occurs first. THE WARRANTY IS AUTOMATICALLY VOID IF:
1) The product has been damaged, altered in any way, or tampered with. For remote starer modules, this includes the opening or removal of the modules plastic covering, or the removal or alterration of the barcode label on the modules plastic covering. 2) The product is damaged due to accident, fire, flood, unreasonable use, improper installation, shipping and handling, misuse, abuse, failing to follow instructions, failure to observe manufacturers wamings,neglect, or other conditions beyond the control of manufacturer. 3) The product has been installed or repaired by anyone other than an authorized Kia technician. 4) The product has been improperly installed or used. THE WARRANTY DOES NOT COVER:
1) Batteries. 2) Scratched or worn transmitter cases. 3) installation and/or removal charges for all remote starter modules and accessories. 4) Shipping and handling charges incurred for product exchange or replacement. 5) Damages from sources other than defect in materials or workmanship. THIS WARRANTY IS LIMITED TO THIRTY SIX (36) MONTHS FROM THE DATE OF ORIGINAL. RETAIL DELIVERY OF THE UNIT. DATE OF FIRST USE, OR 60,000KM, WHICHEVER OCCURS FIRST. THIS LIMITED WARRANTY IS THE ONLY EXPRESS WARRANTY FROM THE MANUFACTURER THAT APPLIES TO YOUR UNIT. THE MANUFACTURER NEITHER ASSUMES NOR AUTORIZES ANY PERSON OR ENTITY TO ASSUME FOR IT ANY OTHER OBLIGATIO OR LIABILITY IN CONNECTION WITH YOUR UNIT OR THIS WARRANTY. ALL OTHER WARRANTIES, INCLUDING BUT NOT LIMITED TO, EXPRESS WARRANTY, IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY EXCLUDED AND DISCLAIMED TO THE MAXIMUM EXTENT ALLOWED BY LAW. MANUFACTURER HAS NO LIABILITY FOR ACTS OF THIRD PARTES. MANUFACTURERS LIABILITY, WHETHER BASED ON CONTRACT, TORT, STRICT LIABILITY, OR ANY OTHER THEORY, SHALL NOT EXCEED THE PURCHASE PRICE OF THE UNIT FOR WHICH A CLAIM HAS BEEN MADE. UNDER NO CIRCUMSTANCE WILL MANUFACTURER BEAR ANY LIABILITY WHATSOEVER FOR INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES. THIS WARRANTY GIVES YOU SPECIFIC RIGHS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM PROVINCE TO PROVINCE, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU. Manufacturer reserves the right to modify this warranty statement at any time. For warranty service, you must provide a copy of the sales receipt or original bill of sale. This warranty is not transferale. The parties hereto elect that any dispute regading the present document be submitted to the appropriate Court located in the Province of Quebec, District of Montreal. The parties hereto agree that this document is governed by and interpreted in accordance with the law of Quebec. If the purchaser is located in a province of Canada other than Quebec, all matters dealing with the warranty of quality will be governed by and interpreted in accordance with the law of Ontatio. If the purchaser is located outside Canada, all matters dealing with the warranty of quality will be governed by and interpreted in accordance with the United Nations Convention on Contracts for the Intemational Sale of Goods(the Vienna Convention). 11 12 Note Note 13 14 Part Number: XXXXXX, REV A 11/2013 KIA MOTORA NUMRO DAPPEL S.A.V 1 - 8 5 5 - 2 2 5 - 7 3 4 4 ( US ) 1 - 8 7 7 - 5 4 2 - 2 8 8 6 ( CA ) DU PROPRITAIRE CL DE DMARRAGE TLCOMMANDE Cl intlligente CL DE DMARRAGE GUIDE DU PROPRITAIRE ATTENTION Il est de la responsabilit du conducteur du vhicule afin de s'assurer que leur vhicule est gar de faon scuritaire et responsable. 1. Lorsqu'on quitte le vhicule, il est de la responsabilit de l'utilisateur de s'assurer que le levier de vitesses est sur la position P (park) afin d'viter les accidents lors du dmarrage distance.
(Note : Assurez-vous que le vhicule automatique ne peut dmarrer sur la position D (drive) ) 2. Il est de la responsabilit de l'utilisateur de s'assurer que le dmarreur distance est dsactiv ou mis en mode V (valet) avant l'entretien. FCC This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. IC This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. 1 2 CL DE DMARRAGE GUIDE DU PROPRITAIRE INTRODUCTION Flicitations pour votre achat d'un systme de dmarrage distance Kia dot de la technologie PowerCode. Ce manuel simplifi dtaille les instructions oprationnelles et les avantages du systme de dmarrage distance. Si vous avez des questions au sujet de ce systme que ce manuel ne traite pas, veuillez contacter votre concessionnaire Kia s'il vous plat. TABLE DES MATIRES :
Utilisation de la cl de dmarrage distance Description des fonctionnalits de la cl tlcommande Prrglage du vhicule Chauffage Essuie-glaces, radio et phares:
Remplacement de la pile de l'metteur de la tlcommande Dmarrage du vhicule Dmarrage distance Fonction antivol Caractristiques du dmarrage distance Mode valet / service Mode panic Fonctionnalits avances : Installation des options programmables Rglage du temps de fonctionnement du moteur Clignotements lors du dmarrage du moteur distance Dpannage en cas de mauvaise porte de transmission Garantie limite trente-six (36) mois ou 60,000 km. Utilisation de la cl de dmarrage distance Description des fonctionnalits de la cl tlcommande Prrglage du vhicule Chauffage Lorsque vous quittez le vhicule, il est conseill de prrgler le contrle daccessoires en prparation du prochain dmarrage. Pour les rglages du chauffage (ou ventilateur) avant et arrire (le cas chant), ils ne doivent pas tre laisss sur HIGH (fort). Il est recommand de le rgler sur LOW (faible) ou MEDIUM (moyen). Essuie-glaces, radio et phares:
Certains vhicules requirent une mise sous tension en mode dmarrage distance pour le fonctionnement de la radio et/
ou des essuie-glaces et/ou des phares circuits. Lorsque vous quittez le vhicule, vous devez vous assurer que les essuie-
glaces et les phares soient teints. En laissant les phares allums sur certains types de vhicules, cela peut le maintenir sur la position ON mme aprs l'arrt du dmarrage distance, ce qui peut entraner le dchargement de la batterie. Armement / Dsarmement REMARQUE: Appuyez sur le bouton 1 fois sur la tlcommande pour armer le vhicule. Pour dsarmer, appuyez sur le bouton deux fois PANIQUE:
Alarme de protection personnelle Remarque: Appuyez sur le bouton pendant 4 secondes Verrouillage, dverrouillage et l'icne de dmarrage distance affiche un seul voyant lumineux START / STOP:
Note: Dmarreur distance-
Appuyez sur le bouton 1 fois et puis appuyez sur le bouton pendant 2 secondes dans les 3 secondes. Moteur distance Stop - Appuyer sur la touche pendant 2 secondes Cl intelligente OE Fonctions des boutons Image Bouton Appuyez 1 fois Appuyez 2 fois Maintenir appuy 2 secondes Maintenir appuy 4 secondes Voyant Caractristiques Verrouillage Dverrouillage Commande Start / Stop Mode PANIC 3 4 Remplacement de la pile de l'metteur de la tlcommande La batterie lithium X 2EA de 3 volts (Modle: CR2025) fournie dans votre tlcommande durera environ trois ans, selon l'utilisation. Lorsque la batterie commence faiblir, vous remarquerez que le voyant LED ne s'affiche plus ou une diminution de l'amplitude ou de la distance par rapport au vhicule quand o utiliserez la tlcommande. Les piles de remplacement sont disponibles dans les magasins d'lectronique locaux. Suivez les instructions ci-dessous pour changer la pile de la tlcommande 1. Vous pouvez utiliser une pice de monnaie pour soulever la partie suprieure de la cl 2. Retirez la pile usage et remplacer la par une neuve 3. Veillez respecter le signe (+) lorsque vous insrez la nouvelle batterie. 4. Avant d'assembler le boitier de l'metteur, veuillez tester la tlcommande.
Note: Recycler ou jeter la vieille batterie conformment aux lois ou rglementations locales. 5 6 Dmarrage du vhicule Dmarrage distance Pour dmarreur distance l'aide de la cl lectronique 1. Appuyez sur le bouton une fois et le voyant LED "Verrouillage" s'affiche. Et puis appuyez sur le bouton pendant 2 secondes dans les 3 secondes. Arrt distance - Appuyez sur le bouton pendant 2 secondes. 2. Si votre vhicule ne dmarre pas ds la premire tentative, le systme s'teindra, attendez alors quelques secondes et essayez de dmarrer le moteur. Il y aura 3 tentatives de dmarrage avant que le systme abandonne. Pour la cl OE 1. Appuyez le bouton moteur n'est pas disponible pendant cinq secondes aprs l'ouverture des portes. 2. Pour arrter le moteur, appuyez sur la touche ou Note: Lorsque le moteur distance commencer utiliser la cl intelligente OE, le champ de rception sera de 30 50 mtres maximum (le mme que la validit du champ de rception de la cl intelligente OE et il peut tre diffrent selon le types de vhicules) brivement dans les trois (3) secondes. Le dmarrage du pendant une demi-seconde. et appuyez sur ou Dbuter la conduite Lorsque le vhicule fonctionne distance, appuyez sur la touche ou l'alarme OEM et dverrouillez les portes. Entrez dans le vhicule et procdez comme suit :
2 fois pour dsarmer l'antidmarrage OEM et/
1. Tourner la cl de contact en position d'allumage IGNITION ON (RUN).
(Ne pas tourner la cl la position CRANK lorsque le moteur est en marche. Cela risque de provoquer le dmarreur rengager.) 2. Appuyez sur la pdale de frein pour dsengager l'unit de dmarrage distance. Avec la cl du vhicule en position d'allumage IGNITION ON (RUN), appuyez sur la pdale de frein et aprs 30 secondes, le vhicule est prt dmarrer. Note: En tat de dmarrage distance, le moteur sera dsactiv selon les conditions suivantes.
- Ouvrez la porte et lorsque 30 secondes seront passes.
- Appuyer sur la pdale de frein sans cl lorsqu'il est en position d'allumage IGNITION ON. Caractristiques du dmarrage distance Mode valet / service Pour Dmarreur distance avec la cl lectronique Le mode Valet / Service est utilis pour empcher le systme dmarrer involontairement le moteur tout en tant desservi. Lorsque votre vhicule est en mode Valet, les fonctionnalits de dmarreur distance sont dsactives. Si le vhicule doit tre rpar, ou si vous stationnez l'intrieur, le mode Valet prviendra le moteur de commencer distance accidentellement. L'une des caractristiques suivantes mettra votre dmarreur distance en mode Valet :
Valet distance :
Cette fonctionnalit vous permet de mettre votre systme en mode Valet l'aide de l'metteur. Pour engager le mode Valet / Service :
Tournez la cl de contact sur la pdale de frein en position ON, appuyez et maintenez la pdale de frein puis rfrez-vous l'activation suivante. Valet distance :
Appuyez sur le bouton Si le vhicule est en mode valet, la lumire clignote une fois. pendant 2 secondes. Pour quitter le mode Valet / Service (Pour le retour du systme son mode de fonctionnement normal) :
Tournez la cl de contact sur la pdale de frein en position ON, appuyez et maintenez la pdale de frein puis reportez-vous l'activation suivante Valet distance :
Appuyez sur le bouton Si le vhicule est hors de modle valet, la lumire clignote deux fois pendant 2 secondes Caractristiques du dmarrage distance Mode panic
ans une situation d'urgence, vous pouvez dclencher le mode panique en appuyant sur la touche secondes, les feux commencent alors de clignoter et les klaxons se dclenchent. Si le vhicule est dj dmarr distance, le moteur s'arrte automatiquement avant de dclencher l'avertisseur sonore. Vous pouvez arrter le klaxon en appuyant sur le bouton 1 fois ou appuyez sur le bouton deux fois. n outre, le mode panique peut tre arrt en activant le mode Valet (section prcdente). Remarque : le mode panique s'teint automatiquement aprs 30 secondes.
pendant plus de 4 Fonctionnalits avances : Installation des options Le tldmarreur a t conu avec la flexibilit et l'intgration de lOEM. Avec ses options programmables, l'unit peut contrler virtuellement tout le systme lectrique de votre vhicule. Attention: La programmation de votre systme devra tre confie un professionnel de Kia. Toute modification aux paramtres peut affecter le fonctionnement de votre tldmarreur. 7 8 Fonctionnalits avances : Installation des options programmables Rglage du temps de fonctionnement du moteur Conditions d'option de configuration Dsarmer le vhicule avec tlcommande. (dverrouillage) La porte conducteur doit tre physiquement ouverte, le moteur arrt, l'allumage en ON, le coffre ouvert et enfin le capot ouvert. Instruction d'option de configuration En condition de rglage de l'option, appuyez sur le bouton pendant 2 secondes. Un signal lumineux et le klaxon de vhicule s'activent en fonction de l'option Temps de dmarrage du moteur (Engine Run Time). Signal lumineux + klaxon 1 fois 2 fois Temps 10 minutes (par dfaut) 5 minutes Clignotements lors du dmarrage du moteur distance Conditions d'option de configuration Dsarmer le vhicule avec tlcommande. (dverrouillage) La porte conducteur doit tre physiquement ouverte, le moteur arrt, l'allumage en ON, le coffre ouvert et enfin le capot ouvert. Instruction d'option de configuration En condition de rglage de l'option, appuyez sur le bouton pendant 2 secondes. Un signal lumineux et le klaxon de vhicule s'activent en fonction de lumire qui clignote pendant le dmarrage du moteur distance. Signal lumineux + klaxon 1 fois 2 fois Clignotements Pas de clignotement clignotements 9 10 Dpannage en cas de mauvaise porte de transmission De nombreux facteurs peuvent influer sur la porte de fonctionnement de l'metteur. Certains d'entre eux sont les suivants:
Ltat de la batterie de l'metteur. L'environnement d'exploitation (par exemple : environnement satur de radiofrquences en centre-ville, aroports, ou proximit de relais tlphoniques). Le mtal : tous les mtaux ont un impact sur le rayon d'exploitation. Cela inclut le vhicule lui-mme. La forme du vhicule peut galement influencer le rayon d'action (les camionnettes ont gnralement moins de porte). La forme du toit et les montants de la carrosserie entranent des dviations radiolectriques importantes (dans ce cas, le signal de la tlcommande). Par consquent, la direction dans laquelle le vhicule est confront en ce qui concerne la tlcommande peut affecter la porte des ondes. En tant droit (debout devant le vhicule) vous obtenez le meilleur angle de transmission. Le deuxime ct tant l'arrire du vhicule. L'utilisation de la tlcommande depuis les cts du vhicule aura gnralement une porte plus faible. La porte sera sensiblement rduite dans un stationnement bond que dans un espace ouvert. Toujours tenir le haut de l'metteur, peu prs hauteur d'paule. Garantie limite trente-six (36) mois ou 60,000 km. Garantie limite trente-six (36) mois ou 60,000 km. Le fabricant garantit au consommateur acheteur seulement, que la cl de dmarrage distance (botier de commande, module de contournement, metteur, antenne, allumage T-harness, et le transpondeur T-harness; collectivement dsigns comme tant des unit) sera exempt de dfauts matriels et de fabrication pour une priode de trente-six (36) mois compter de la date de livraison au dtail l'unit, la date de premire utilisation ou 60,000 km, selon la premire ventualit. LA GARANTIE S'ANNULE AUTOMATIQUEMENT SI:
1) Le produit a t endommag, altr de quelque manire, ou trafiqu. Pour les composants de la cl de dmarrage distance, ceci comprend l'ouverture ou l'enlvement du revtement en plastique de l'appareil, la suppression ou la modification de l'tiquette de code barres sur le revtement en plastique du module. 2)Le produit est endommag suite un accident, un incendie, une inondation, une utilisation abusive, une mauvaise installation, d'expdition et de manutention, d'autres abus, la ngligence des instructions, inattention des avertissements
"warnings (danger)", ou d'autres formes de ngligences qui chappent aux consignes du constructeur. 3) Le produit a t install ou rpar par une personne autre qu'un technicien Kia agr. 4) Le produit a t mal install ou utilis. LA GARANTIE NE COUVRE PAS:
1) Les piles. 2) Les gratignures ou traces sur le revtement de l'metteur. 3) L'installation et / ou les frais de dmnagement pour tous les modules et accessoires dmarreur distance. 4) L'expdition et les frais de livraison encourus pour l'change ou le remplacement du produit. 5) Les dommages provenant de sources autres que les dfauts de matriaux ou de fabrication. CETTE GARANTIE EST LIMITE TRENTE-SIX (36) MOIS COMPTER DE LA DATE D'ORIGINE : LIVRAISON DE DTAIL DE L'UNIT. DATE DE LA PREMIERE UTILISATION, OU 60,000 KM, SELON LA PREMIRE VENTUALITE ICI CITE. CETTE GARANTIE EST LA SEULE ET UNIQUE GARANTIE DU FABRICANT QUI S'APPLIQUE VOTRE APPAREIL. LE FABRICANT N'ASSUME ET N'AUTORISE AUCUNE PERSONNE OU ENTIT ASSUMER EN SON NOM TOUTE AUTRES OBLIGATION OU RESPONSABILIT EN RELATION AVEC VOTRE APPAREIL OU CETTE GARANTIE. LE FABRICANT N'ASSUME ET N'AUTORISE AUCUNE PERSONNE OU ENTIT ASSUMER EN SON NOM TOUTE AUTRES OBLIGATION OU RESPONSABILIT EN RELATION AVEC VOTRE APPAREIL OU CETTE GARANTIE. TOUTE AUTRE GARANTIE, Y COMPRIS, MAIS SANS S'Y LIMITER, GARANTIE, GARANTIE IMPLICITE DE QUALIT MARCHANDE OU D'ADQUATION UN USAGE PARTICULIER SONT EXPRESSMENT EXCLUS ET INVALIDES DANS LA MESURE MAXIMALE AUTORISE PAR LA LOI. LE FABRICANT N'A AUCUNE RESPONSABILIT POUR LES ACTES EFFECTUS PAR UN TIERS. LA RESPONSABILIT DU FABRICANT, QUE CE SOIT PAR LE CONTRAT, UN DLIT, LA RESPONSABILIT STRICTE OU TOUTE AUTRE THORIE, NE DPASSE PAS LE PRIX D'ACHAT DE L'APPAREIL POUR TOUTE RCLAMATION FAITE. EN AUCUN CAS LE FABRICANT PORTERA UNE RESPONSABILIT POUR DES DOMMAGES ACCIDENTELS, SPCIAUX OU INDIRECTS. CETTE GARANTIE VOUS DONNE DES DROITS SPCIFIQUES ET VOUS POUVEZ AUSSI AVOIR D'AUTRES DROITS QUI PEUVENT VARIER D'UN LIEU UN AUTRE, PAR CONSQUENT LES LIMITATIONS CI-DESSUS PEUVENT NE PAS S'APPLIQUER POUR VOUS. Le fabricant se rserve le droit de modifier cette dclaration de garantie tout moment. Pour le service sous garantie, vous devez fournir une copie du ticket de caisse ou facture d'achat originale. Cette garantie n'est pas cessible. Les parties aux prsentes choisissent que tout litige concernant le prsent document sera soumis au tribunal appropri situ dans la province de Qubec, district de Montral. Les parties aux prsentes conviennent que le prsent document est rgi et interprt conformment la loi du Qubec. Si l'acheteur est situ dans une province du Canada autre que le Qubec, toutes les questions relatives la garantie de la qualit seront rgies et interprtes conformment la loi de lOntatio. Si l'acheteur est situ l'extrieur du Canada, toutes les questions relatives la garantie de la qualit seront rgies et interprtes conformment la Convention des Nations Unies sur les contrats de vente internationale de marchandises (la "Convention de Vienne"). 11 12 Note Note 13 14
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2014-01-08 | 910.92 ~ 919.08 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2014-01-08
|
||||
1 | Applicant's complete, legal business name |
SEGI LIMITED
|
||||
1 | FCC Registration Number (FRN) |
0007994122
|
||||
1 | Physical Address |
Unit J2, 4/F, Block 1, Kinho Industrial Building
|
||||
1 |
HONGKONG, N/A
|
|||||
1 |
China
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
L******@ul.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
VA5
|
||||
1 | Equipment Product Code |
RED301-1WSS
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
Y**** C******
|
||||
1 | Telephone Number |
(852)********
|
||||
1 | Fax Number |
(852)********
|
||||
1 |
s******@gmail.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Keyless Entry System | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Output power listed is conducted. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Testing and Certification Agency of RAPA
|
||||
1 | Name |
W******** K********
|
||||
1 | Telephone Number |
82-31********
|
||||
1 | Fax Number |
82-31********
|
||||
1 |
k******@rapa.or.kr
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 910.92000000 | 919.08000000 | 0.0283700 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC