all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
Users Manual | Users Manual | 4.66 MiB | ||||
1 | Cover Letter(s) | |||||||
1 | Cover Letter(s) | |||||||
1 | External Photos | |||||||
1 | ID Label/Location Info | |||||||
1 | Internal Photos | |||||||
1 | Test Report | |||||||
1 | Test Setup Photos |
1 | Users Manual | Users Manual | 4.66 MiB |
de cette conformit peuvent annuler lautorisation doprer ce dispositif. AVERTISSEMENT:Des changements ou modifications non-expressement approuvs par les parties responsables
(2) Ce dispositif devrait accepter les interfrences reues incluant celles qui pourraient occasionner des oprations indsirab
(1) Ce dispositif ne devrait pas causer des interfrences nuisibles. Cet appareil est conforme aux standard(s) RSS exempt(s) de licence dIndustrie Canada. Son utilisation est sujette aux conditions suivantes :
Ce dispositif est conforme avec la partie 15 des rglements FCC.Lopration est assujettie aux conditions suivantes :
les. www.firstechllc.com www.compustar.com 7087A-R762A433 7087A-R762A433 7087A-1WREC340SP 7087A-1WREC320SP 7087A-R762WSS 7087A-1WREC310433 334A069R-A7807 7087A-R961WSS 7087A-R762WSS 7087A-R961AM VA5JR762A433 VA5JR762A433 VA5REC340-1WSP VA5REC320-1WSP VA5JR762WSS VA5REC310-1W433 A/N VA5JR961-1WSS VA5JR762WSS VA5JR961AM IC(seulement International) FCC (seulement USA) Numro didentificationNumro didentification NU762R-AM 1WG8R-SH(CN) 1WG9R-SP 1WG7R-SP 1WG8R-SS 1WG6R-AM(CN) 069-RMAW1ZV 1WG5R-SS 1WSS-25 1W900SHR-961 Tlcommande 7087A-762F907 5532A-J1WPLL4R 7087A-1WFM4R 334F051R-A7807 7087A-R150A433 7087A-R763A433 7087A-R762A433 7087A-R5120AM 7087A-R1800AM 5532A-JR1600 5532A-J1WAM4R IC(seulement International) VA5JR762F907 N99J1WPLL4R O44J1WFM4R A/N O44JR1700A433 VA5JR763AM433 VA5JR762A433 O44JR5120AMSH O44JR1800A433 O44JR1600 O44J1WAM4R FCC (seulement USA) Numro didentificationNumro didentification 1W900FMR-Pro 1W900FMR 1WFMR-Fiance R0002UN NU1000R 1WAMR-763 1WAMR-762 1WAMR-1900 1WAMR-1800 1WAMR-1600 1WAMR-Fiance Tlcommande Toutes les tlcommandes unidirectionnelles 4 boutons Applicable aux tlcommandes suivantes;
GUIDE DE LUTILISATEUR www.compustar.com www.firstechllc.com Applicable to the following remote(s):
All 1Way 4Button Remote Remote 1WAMR-Fiance 1WAMR-1600 1WAMR-1800 1WAMR-1900 1WAMR-762 1WAMR-763 NU1000R R0002UN 1WFMR-Fiance 1W900FMR 1W900FMR-Pro FCC ID Number
(US Only) O44J1WAM4R O44JR1600 O44JR1800A433 O44JR5120AMSH VA5JR762A433 VA5JR763AM433 O44JR1700A433 A/N O44J1WFM4R N99J1WPLL4R VA5JR762F907 IC ID Number
(International Only) 5532A-J1WAM4R 5532A-JR1600 7087A-R1800AM 7087A-R5120AM 7087A-R762A433 7087A-R763A433 7087A-R150A433 334F051R-A7807 7087A-1WFM4R 5532A-J1WPLL4R 7087A-762F907 Remote 1W900SHR-961 1WSS-25 1WG5R-SS 069-RMAW1ZV 1WG6R-AM(CN) 1WG8R-SS 1WG7R-SP 1WG9R-SP 1WG8R-SH(CN) NU762R-AM FCC ID Number
(US Only) VA5JR961AM VA5JR762WSS VA5JR961-1WSS A/N VA5REC310-1W433 VA5JR762WSS VA5REC320-1WSP VA5REC340-1WSP VA5JR762A433 VA5JR762A433 IC ID Number
(International Only) 7087A-R961AM 7087A-R762WSS 7087A-R961WSS 334A069R-A7807 7087A-1WREC310433 7087A-R762WSS 7087A-1WREC320SP 7087A-1WREC340SP 7087A-R762A433 7087A-R762A433
Introduction Thank you for purchasing a Firstech system for your vehicle. In order to truly enjoy the benefits of this system, we recommend that you thoroughly review the following manual. Please note that this manual applies to the 1 Way-4 Button Non Liquid Crystal Display Remotes, regardless of whether you purchased the alarm only, starter only or alarm/starter combination. There are certain features listed in this manual that may not be available for your system. There may also be features listed in this manual that require additional installation or programming before they are active. If you have any questions, please contact the original place of purchase. For further information you may also contact our customer support center by calling 888-820-3690. Warranty Coverage Caution: The Manufactures warranty will be voided if this product is installed by anyone other than an authorized Firstech dealer. For complete warranty details visit www.compustar.com or the last page of this manual. Firstech remotes carry a 1 year warranty from original date of purchase. Warranty registration can be completed online by visiting www.compustar.com. Please complete the registration form within 10 days of purchase. We do not include a mail in warranty registration card with each unit. Registration must be done online. To verify that an authorized dealer installed your system, we highly recommend that you keep a copy of the original proof of purchase, such as the dealer invoice in a safe place. By Firstech, LLC 2 By Firstech, LLC 2 3 By Firstech, LLC Quick Reference
When servicing or loaning your vehicle to others, the system should be in Valet mode. Valet mode prevents the system from remote starting and disables all alarm functions. IMPORTANT: While in Valet mode the remote will still control power lock and unlock systems. The parking lights will not flash. The system can be put into valet one of three ways:
1. Turn the vehicles key to the ignition on position and tap buttons simultaneously for 0.5 seconds. The parking lights will flash once and/or siren chirp once to confirm the system is in valet mode. Repeat this process to take the system out of valet mode. The parking lights will flash twice and/or siren chirp once to confirm the system is out of valet mode. 2. If you dont have your remote control, you can put the system into valet by turning the ignition key on and then off five times within 7 seconds. The parking lights will flash once to confirm the system is in valet mode. Shortly after the first flash, the parking lights will flash twice. A remote control is required to take the system out of valet mode. IMPORTANT: If your system is set up for a secure valet option, you will not be able to put the system into valet until the proper code has been entered to the secure valet switch. 3. If your system is set up with the secure valet switch (optional), you will not be able to put the system into valet until the proper code has been entered to the secure valet switch. The secure valet switch is the small button with bright blue LED on the front and if installed is the only way to override the alarm and/or remote start. The default code is (3, 3).
The only regular maintenance this system requires is remote control battery replacement. No programming is required when replacing the battery. First, remove the small Phillips screw located on the back of the remote. Once the screw has been removed, gently pull the remote apart taking care to not damage the circuit board. 1 Way remote batteries differ among the models. Your battery size should be listed on the battery. Replacements can be purchased from your local Firstech dealer or an electronics store.
Button Duration Additional Function / Description Programming Required 0.5 seconds 3.5 seconds 0.5 seconds 0.5 seconds 2.5 seconds no no no no no Locks doors and/or arms alarm. Panic/vehicle locater (flashes vehicles parking lights and sounds siren and horn). Unlocks doors and/or disarms alarm. Aux 1. Triggers the auxiliary 1 output
(most commonly used for rear defrost or window roll-down) Trunk pop. Triggers the trunk release output and opens the vehicles trunk. By Firstech, LLC 4 5 By Firstech, LLC Button Duration Additional Programming Required Function / Description Aux 2. Triggers the auxiliary 2 output (most commonly used for rear defrost or window roll-down) Activates the remote start. Repeat and remote start will shut off. Turns siren on/off (Note: With the siren off, it will still sound in the event the alarm is triggered) Valet mode (see Valet Mode section for details) Turns the shock sensor on/off. (Alarm or Alarm/Starter systems only) Drive lock. Activates ignition controlled door locks. 0.5 seconds 2.5 seconds 0.5 seconds 0.5 seconds 2.5 seconds 0.5 seconds 0.5 seconds 0.5 seconds 0.5 seconds 2.5 seconds no no no no no yes no yes yes no Activates passive arming (vehicle will arm/lock 30 seconds after the vehicle is disarmed)
Activates timer start mode. Timer start mode has multiple programmable settings:
duration settings, temperature settings and self start settings. Activates the built in Turbo timer function. Additional installation is required when using this feature on automatic transmission vehicles. Car Check (updates vehicle status on remote pager) / Secure Auxiliary Press the button for 2.5 seconds to remote start an automatic transmission vehicle. If you are in range and if the vehicle is ready to remote start, the parking lights will flash once and/or siren chirp once to indicate that the remote start command has been successfully transmitted. If you are in range and the parking lights flash and/or vehicles siren chirps three times, there is a remote start error. Refer to the remote start error diagnostic at the end of this manual for details. The remote start run time can be programmed for 3, 15, 25, or 45 minutes - ask your local Firstech dealer to adjust Option 2-7 if you would like a run time other than 15 minutes (default). IMPORTANT: Your vehicles key must be inserted into the ignition and turned to the on position prior to driving your vehicle. If the foot brake is depressed prior to the key being in the on position, the vehicle will shut off. By Firstech, LLC 6 7 By Firstech, LLC General System Functions The remote transmitter functions have been predetermined and programmed from the factory. The four button configuration allows for many functions to be performed through a series of tapping, holding and / or multiple presses of buttons. Although Firstech remotes have numerous button functions and capabilities, please keep in mind that the most common functions are performed in one simple step. There are advanced features not described in this manual. Please go to www.compustar.com for more details.
Tap button for 0.5 seconds to lock/arm and unlock/disarm. The LED will flash on your remote. If your vehicle is locked, tap button to unlock; if your vehicle is unlocked, tap button to lock. IMPORTANT: If the alarm has been triggered (Siren is going off), you must wait up to 5 seconds before disarming the alarm - the first button tap will shut off the alarm and the second will unlock/disarm the system. General System Functions
In order to remote start a manual transmission vehicle, the system must first be set in Reservation Mode. Reservation Mode must be set each and every time you want to remote start a manual transmission vehicle. The purpose of Reservation Mode is to leave the transmission in neutral before exiting the vehicle. IMPORANT The transmission must be left in the neutral position. The vehicles door pins must be in working order. Do not install this remote start on a manual transmission vehicle that has a convertible or removable top. The vehicles windows must be rolled up. Do not set reservation mode or remote start with people in the vehicle. Activating Reservation Mode STEP 1: While the vehicle is running, place the transmission in neutral, set the emergency / parking brake, and remove pressure from the foot brake. STEP 2: Remove the key from the vehicles ignition. The vehicles engine should remain running even after the key has been removed. If the vehicle does not remain running make sure your system is not in Valet mode and then contact your local authorized dealer for service. STEP 3: Exit the vehicle and close the door. The vehicles engine should shut off within 10 seconds upon closing the last door. Most motors will shut off instantly upon closing the last door. If the vehicles engine does not shut off, your door trigger may be functioning improperly. Do not use the remote start feature and take your vehicle to a local authorized dealer for service. IMPORTANT: By default, the system will lock/arm the vehicle upon setting reservation mode. Take care to not lock your keys inside the vehicle. Cancelling Reservation Mode Reservation mode will be cancelled for the following reasons;
You did not activate the parking brake prior to turning off the ignition. You released the parking brake after the key was removed from the ignition. You entered valet mode, opened the vehicles door, hood, trunk or set off the alarm. You pressed the foot brake after the key was removed from the ignition.
Hold button for 2.5 seconds to release the trunk or hatch. If you are in range, the vehicles parking lights will flash once and/or siren chirp once indicating that the trunk release command has been successfully transmitted. IMPORTANT: Trunk release is an optional vehicle feature that may require additional parts and labor.
Upon lock/arm and unlock/disarm, you can eliminate vehicles audible confirmation by muting the siren. Normally, the siren will chirp once to indicate the system is locked/armed and twice to indicate the system is unlocked/disarmed. To mute the siren tap buttons simultaneously for 0.5 seconds. IMPORTANT: Even when the siren is muted, it will still go off in the event the alarm is triggered.
Hold buttons simultaneously for 2.5 seconds to turn the shock sensor on and off. The vehicles parking lights will flash once and/or siren chirp once to confirm the shock sensor is on. The vehicles parking lights will flash twice and/or siren chirp twice to confirm the shock sensor is off. IMPORTANT: Turning off the shock sensor also turns off the optional sensor(s). The shock sensor does not recognize impact for 30 seconds after the system has been armed. By Firstech, LLC 8 9 By Firstech, LLC Advanced System Functions Remote Start Error Diagnostic There are lots of advanced features available for your system. Please go to www.compustar.com for more details. Remote Coding / Programming Routine (S) IMPORTANT: Every Firstech remote must be coded to the system prior to performing any operations. All remotes must be coded at the same time.
STEP 1: Activate Valet/Programming mode by manually turning the ignition key on and off (between the Acc & On positions) five times within 7 seconds. The vehicles parking lights will flash once with the successful completion of this step. STEP 2: Within 2 seconds after cycling the ignition for the 5th time, press button (I) on 2 way remotes or the (lock) button on 1 way remotes for 0.5 seconds. The parking lights will flash once to confirm the transmitter has been coded. Exiting Programming: Programming is a timed sequence. The parking lights will flash twice signaling the end of programming mode. Programming Multiple Remotes: After the confirmation flash given in step 2, code additional remotes by pressing button (I) on 2 way remotes or the (lock) button on 1 way remotes. The parking lights will flash once confirming each additional remote. All systems (except the P2WSSR), can recognize up to three remotes. If the remote start fails to start the vehicle, the parking lights will flash three times immediately. Following those three flashes the parking lights will flash again corresponding to the error table. Number of Parking Light Flashes 1 2 3 4 5 6 7 8 Remote Start Error Motor running Key in ignition on position Door open (manual transmission only) Trunk open Foot brake on Hood open Reservation off (manual transmission only) Tach or voltage sensing failure We recommend that you do not attempt any repairs on your remote starter. Contact your dealer or call us directly. By Firstech, LLC 10 11 By Firstech, LLC Alarm Diagnostic Limited Lifetime Warranty While the alarm is armed, the LED will blink slowly. While the siren is going off, the LED will indicate the specific zone that was triggered. Upon disarming the alarm after it has been triggered, the amount of siren chirps will indicate the specific zone. Priority Situation LED On Duty Number of Siren Chirps (If Installed) 1 2 3 4 Door/Hood/Trunk/Key Triggered 2 flash, rest, then repeat 2nd Shock Triggered Optional Sensor Triggered 3 flash, rest, then repeat 4 flash, rest, then repeat 6 5 4 PANIC 5 flash , rest, then repeat N / A By Firstech, LLC 12 Firstech, LLC Warrants to the original purchaser that this product shall be free of defects in material and workmanship under normal use and circumstances for the period of time that the original owner of this product owns the vehicle in which it is installed; except that the remote controller unit for the period of one year from the date of installation to the original owner of this product. When the original purchaser returns the product to the retail store where it was purchased or prepaid postal to Firstech, LLC., 21903 68th Avenue South, Kent, WA 98032, USA within the warranty period, and if the product is defective, Firstech, LLC, will at its option repair or replace such. TO THE MAXIMUM EXTENT ALLOWED BY LAW, ANY AND ALL WARRANTIES ARE EXCLUDED BY THE MANUFACTURER AND EACH ENTITY PARTICIPATING IN THE STREAM OF COMMERCE THEREWITH. THIS EXCLUSION INCLUDES BUT IS NOT LIMITED TO, THE EXCLUSION OF ANY AND ALL WARRANTY OF MERCHANTABILITY AND/OR ANY AND ALL WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND/OR ANY AND ALL WARRANTY OF NON-INFRINGEMENT OR PATENTS, IN THE UNITED STATES OF AMERICA AND/OR ABROAD. NEITHER THE MANUFACTURER OF ANY ENTITIES CONNECTED THEREWITH SHALL BE RESPONSIBLE OR LIABLE FOR ANY DAMAGES WHATSOEVER, INCLUDING BUT NOT LIMITED TO, ANY CONSEQUENTIAL DAMAGES, INCIDENTAL DAMAGES, DAMAGES FOR LOSS OF TIME, LOSS OF EARNINGS, COMMERCIAL LOSS, LOSS OF ECONOMIC OPPORTUNITY AND THE LIKE. NOTWITHSTANDING THE ABOVE, MANUFACTURER DOES OFFER A LIMITED WARRANTY TO REPLACE OR REPAIR THE CONTROL MODULE AS DESCRIBED ABOVE. Some states do not allow limitations on how long an implied warranty will last or the exclusion or limitation on how long an implied warranty will last or the exclusion or limitation of incidental or consequential damages. This warranty gives you specific legal rights, and you may also have other rights, which vary State to State. Firstech, LLC. is not RESPONSIBLE OR LIABLE FOR ANY DAMAGES WHATSOEVER, INCLUDING BUT NOT LIMITED TO, ANY CONSEQUENTIAL DAMAGES, INCIDENTAL DAMAGES, DAMAGES FOR LOSS OF TIME, LOSS OF EARNINGS, COMMERCIAL LOSS, LOSS OF ECONOMIC OPPORTUNITY AND THE LIKE that may or may not resulted from the operation of Compustar, Compustar Pro, Arctic Start, Vizion, or NuStart. NOT WITH STANDING THE ABOVE, MANUFACTURER DOES OFFER A LIMITED WARRANTY TO REPLACE OR REPAIR THE CONTROL MODULE AS DESCRIBED ABOVE. Your Warranty The products warranty is automatically void if the date code or serial number is defaced, missing or altered. This warranty will not be valid unless you have completed the registration card at www.compustar.com within 10 days of purchase. 13 By Firstech, LLC 8102RECAL000201 / FT-1W-EF V1.2 By Firstech LLC Version 1.2(C05) Kent, WA 98032 21903 68th Ave S Toll Free : 888-820-3690 Toll Free : 888-820-3690 21903 68th Ave S Kent, WA 98032 By Firstech LLC Version 1.2(C05) 8102RECAL000201 / FT-1W-EF V1.2 3 By Firstech, LLC By Firstech, LLC 2 By Firstech, LLC 2 comme par exemple la facture du vendeur, dans une place sre. vrifier que linstallation a t faite par un reprsentant autoris, nous vous recommandons fortement de garder une copie de la preuve dachat originale, jours suivant votre achat. Nous nincluons plus une carte denregistrement de lassurance avec chaque unit; limmatriculation doit tre faite en ligne. Pour Vous pouvez enregistrer lassurance en ligne au www.compustar.com. Sil vous plat, veuillez complter le formulaire pour vous enregistrer dans les 10 dun (1) an partir de la date originale dachat. dtails complets sur la garantie, veuillez consulter www.compustar.com ou la dernire page de ce manuel. Les tlcommandes Firstech ont une garantie Attention:La garantie du manufacturier sera annule si ce produit est install par quelquun qui nes pas un reprsentant autoris de Firstech. Pour les
Couverture de la Garantie 888-820-3690. veuillez contacter votre marchand. Pour plus dinformation vous pouvez aussi contacter notre centre de service la clientle, en appelant le rpertories dans ce manuel qui exigent une installation ou la programmation supplmentaires avant dtre fonctionnelles. Si vous avez des questions, y a certaines fonctions rpertories dans ce manuel qui peuvent ne pas tre disponibles pour votre systme. Il peut y avoir aussi certaines fonctions boutons afficheur cristaux non liquides sans tenir compte si vous avez achet seulement lalarme, le dmarreur ou la combinaison alarme/dmarreur. Il recommandons de lire attentivement ce manuel au complet. Veuillez noter que ce manuel sapplique aux systmes tlcommandes unidirectionnelles 4 Merci davoir achet un systme Firstech pour votre vhicule. Pour pouvoir profiter pleinement de tous les bnfices de ce systme, nous vous Introduction
10
4 boutons Programmation de tlcommandes unidirectionnelles
9 9 9 8 7 7
Activer et dsactiver le dtecteur dimpact Activation / dsactivation silencieuses Dclenchement du coffre transmission manuelle (Mode rserv) Fonction de dmarrage distance dun vhicule transmission automatique Fonction de dmarrage distance pour
/dsactivation en mode actif Verrouillage/activation et dverrouillage
Fonctions des boutons des tlcommandes unidirectionnelles5 Entretien de la tlcommande - Remplacement de la batterie 5 4 Le systme peut tre mis en mode valet de trois faons:
4 Mode Valet
5 By Firstech, LLC By Firstech, LLC 4 Ouverture du coffre. Active la sortie de dclenchement du coffre et ouvre le coffre Aux 1. Dclenche la sortie auxiliaire 1 (utilise le plus souvent pour le dgivreur arrire ou louverture des fentres) Panique/localisateur du vhicule (les feux de stationnement clignotent et la sirne et le klaxon sonnent) Dverrouille les portires ou dsactive lalarme Verrouille les portires ou active lalarme non non non non non 2.5 seconds 0.5 seconds 0.5 seconds 3.5 seconds 0.5 seconds Description de la fonction Programmation Dure Bouton supplmentaire requise
Fonctions des boutons des tlcommandes unidirectionnelles batterie devrait tre indique sur celle-ci. Ces batteries peuvent tre achetes chez votre reprsentant Firstech ou dans un magasin dlectronique. attention de ne pas endommager la carte de circuit imprim. Les batteries de tlcommandes unidirectionnelles varient selon les modles. La grosseur de la En premier, enlevez la petite vis cruciforme situe sur larrire de la tlcommande. Une fois la vis enleve, ouvrez doucement la tlcommande en faisant Tlcommandes unidirectionnelles:
au moment du remplacement de la batterie. Le seul entretien rgulier demand par ce systme est le remplacement de la batterie de la tlcommande. Aucune programmation nest requise
pralablement, le code correspondant avec le commutateur de valet scuritaire. Le code par dfaut est (3, 3). 3. (Fonction optionnelle) Si vous avez achet loption commutateur de valet scuritaire, vous ne pourrez pas mettre le systme en mode valet sans avoir entr IMPORTANT :Si votre systme est rgl pour loption valet scuritaire, vous ne pourrez pas le mettre en mode valet jusqu ce que le code appropri soit premier clignotement, les feux clignoteront deux fois. Pour enlever le mode valet vous aurez besoin de la tlcommande. contact cinq fois lintrieur de 7 secondes. Les feux de stationnement clignoteront une fois pour confirmer que le systme est en mode valet. Peu aprs le 2. Si vous navez pas votre tlcommande, vous pouvez mettre le systme en mode valet en tournant la cl entre la position on et off dans le entr dans le commutateur de valet scuritaire. sorti du mode valet. pour enlever le mode valet. Les feux de stationnement clignoteront deux fois et/ou la sirne mettra un bip pour confirmer que le systme est Les feux de stationnement clignoteront une fois et/ou la sirne mettra un bip pour confirmer que le systme est en mode valet. Rptez ceci 1. Tournez la cl du vhicule la position on dans le contact et pressez, simultanment pendant 0,5 secondes les boutons Le systme peut tre mis en mode valet de trois faons:
IMPORTANT : Pendant que le Mode Valet est activ, la tlcommande continuera de verrouiller et dverrouiller les systmes de verrouillage distance et dsactive toutes les fonctions de lalarme Lors de lentretien du vhicule ou du prt de celui-ci, votre systme Firstech devrait tre plac en Mode Valet. Le Mode Valet empche le systme de dmarrer commande lectrique.
Consultation rapide 7 By Firstech, LLC By Firstech, LLC 6 2-7 si vous prfrez un temps de roulement autre que 15 minutes (par dfaut) dmarrage distance peut tre programm pour 3, 15, 25 ou 45 minutes demandez votre reprsentant local de Firstech dajuster loption Aprs avoir confirm que votre vhicule est en marche, les feux de stationnement sallumeront compltement. Le temps de roulement du erreur du dmarrage distance. Veuillez vous rfrer la partie diagnostics de dmarrage distance dans la dernire page de ce manuel pour avoir plus de dtails. Si pendant que vous tes dans le rayon, les feux de stationnement du vhicule clignotent trois fois suivi dun certain nombre aprs ceci, cela indique quil y a eu une distance a t envoye avec succs. est prt dmarrer distance, les feux de stationnement clignoteront une fois et/ou la sirne mettra un bip pour indiquer que la commande de dmarrage Pressez le bouton pendant 2,5 secondes pour dmarrer distance un vhicule transmission automatique. Si vous tes dans le rayon et si le vhicule
le fermera lalarme et la seconde dverrouillera/dsactivera le systme. IMPORTANT: Si lalarme a t dclenche (la sirne sonne), vous devez attendre au moins 5 secondes avant de dsactiver lalarme - la premire pression sur bouton pour verrouiller. tlcommande. Si votre vhicule est verrouill, pressez le bouton pour dverrouiller. Si votre vhicule est dverrouill, pressez le Pressez le bouton pendants 0,5 secondes pour verrouiller/activer et pour dverrouiller/dsactiver. LACL clignotera sur votre
des possibilits, les fonctions les plus courantes peuvent tre utilises en une seule tape. en pressant, ou en tenant presss une srie ou combinaisons des boutons. Mme si les tlcommandes Firstech ont plusieurs boutons de fonctions et Les fonctions de lmetteur distance ont t fixes et programmes lusine. La configuration quatre boutons permet dutiliser plusieurs fonctions Fonctions gnrales du systme Contrle de lauto (met jour le statut du vhicule sur la tlcommande) /auxiliaire scuritaire non 2.5 seconds requise quand vous utilisez cette fonction dans un vhicule transmission automatique Active la fonction intgre de minuterie turbo. Une installation supplmentaire est rglages programmables : dure, temprature et auto dmarrage Active le mode de dmarrage minut. Le mode de dmarrage minut a plusieurs
(le vhicule sactivera/se verrouillera 30 secondes aprs que la dernire portire soit ferme) Met en marche lactivation passive Verrouillage en conduite. Active les verrous des portires contrls par le dmarrage Active et dsactive le dtecteur dimpact. (Seulement les systmes dalarmes ou alarme/dmarreur) Mode Valet (rfrez-vous la section Mode Valet pour avoir plus de dtails)
(Note: avec les bips de la sirne dsactivs, celle-ci sonnera quand mme si lalarme est dclenche) Active et dsactive les bips de la sirne Active le dmarrage distance. Rptez et le dmarrage distance sera arrt Aux 2. Dclenche la sortie auxiliaire 2 (utilise le plus souvent pour le dgivreur arrire ou louverture des fentres) Oui Oui non Oui non non non non non 0.5 seconds 0.5 seconds 0.5 seconds 0.5 seconds 2.5 seconds 0.5 seconds 0.5 seconds 2.5 seconds 0.5 seconds Description de la fonction supplmentaire requise Programmation Dure Bouton
9 By Firstech, LLC dtecteur dimpacts ne reconnat pas dimpact dans les 30 premires secondes aprs avoir activ le systme. grand est le chiffre figurant dans le cadran, plus leve sera la sensibilit limpact. La slection recommande dans la plupart des vhicules est entre 2 et 4. Le Ajuster la sensibilit du dtecteur dimpact est fait mme le dtecteur, lequel est gnralement install quelque part sous le tableau de bord du vhicule. Plus IMPORANT:Dsactiver ce senseur dsactive aussi le dtecteur optionnel. la sirne mettra deux bips pour confirmer que le dtecteur est dsactiv. du vhicule clignoteront une fois et/ou la sirne mettra un bip pour confirmer que ce dtecteur est actif. Les feux clignoteront deux fois et/ou Appuyez sur les boutons simultanment pendant 2,5 secondes pour activer ou dsactiver ce dtecteur. Les feux de stationnement
IMPORANT:Mme si la sirne est coupe, elle sonnera si lalarme est dclenche. indiquer quil est dverrouill/dsactiv. Pour couper le son, appuyez sur les boutons simultanment pendant 0,5 secondes. en assourdissant la sirne. Normalement, la sirne mettra un bip sonore pour indiquer que le systme est verrouill/activ et deux bips pour Au moment de verrouiller/activer ou de dverrouiller/dsactiver le systme, vous pouvez - optionnellement - liminer la confirmation sonore IMPORTANT:louverture distance du coffre est en option et peut demander des composantes et du travail additionnels.
du vhicule clignoteront une fois et/ou la sirne mettra un bip pour indiquer que la commande pour ouvrir le coffre a t transmise avec succs. Enfoncez le bouton pendant 2,5 secondes pour dclencher louverture du coffre ou le haillon. Si vous tes dans le rayon, les feux de stationnement By Firstech, LLC 8 Vous tes entr en mode Valet, ouvert les portires, le capot, le coffre ou vous avez activ lalarme. Vous avez press la pdale de frein avant que la cl soit retire du contact;
Vous navez pas mis le frein main avant darrter le contact; Vous avez enlev le frein main aprs que la cl ait t enleve du contact;
Le mode rserv sera annul pour les raisons suivantes :
Annulation le mode rserv lintrieur de la voiture. IMPORTANT :Par dfaut, le systme laissera le vhicule verrouill/activ quand vous le mettez en mode rserv. Faites attention de ne pas laisser les cls Une fois que le moteur du vhicule est ferm, le systme restera en mode rserv et le vhicule sera prt pour tre dmarr distance en toute scurit. amener votre vhicule pour service chez le reprsentant autoris. Sil ne sarrtait pas, il est probable que le dclencheur de portires ne fonctionne pas correctement. Dans ce cas, nutilisez pas le dmarrage distance et TAPE 3:Sortez du vhicule et fermez la portire. Le moteur du vhicule devrait sarrter lintrieur de 10 secondes aprs avoir ferm la dernire portire. reprsentant autoris pour service. TAPE 2:Enlevez la cl du contact. Le moteur devra continuer de rouler malgr que vous ayez enlev la cl du contact. Si ce nest pas le cas, consultez votre TAPE 1: Pendant que le moteur roule, placez la transmission au neutre, actionnez le frein main et relchez la pdale de frein. Activation du mode rserv Ninstallez pas cet appareil dans un vhicule manuel toit ouvrant ou convertible;
Les dclencheurs des portires doivent fonctionner correctement;
Ne slectionnez pas le mode manuel ni dmarrez pas distance avec des personnes ou animaux lintrieur du vhicule. Les fentres doivent tre fermes;
La transmission doit tre laisse la position neutre;
IMPORANT fois que vous voulez dmarrer distance un vhicule manuel. Lobjectif de ce mode est de laisser la transmission au neutre avant de quitter le vhicule. Pour dmarrer distance un vhicule manuel, le systme doit tre en premier en mode RSERV. Le mode rserv doit tre slectionn chaque et toutes les
presse avant lopration ci-dcrite, le vhicule sarrtera. IMPORTANT:La cl de votre vhicule doit tre insre dans le contact et dans la position <on> avant de conduire le vhicule. Si la pdale de frein est 11 By Firstech, LLC By Firstech, LLC 10 Nous recommandons que vous nessayiez pas de rparer votre appareil. Veuillez contacter votre reprsentant ou appelez-nous directement. Dtection de Tachymtre ou voltage dfectueuse Mode rserv dsactiv (transmission manuelle uniquement) Capot ouvert Pdale de frein actionne Coffre ouvert Portire ouverte (transmission manuelle seulement) La cl est en position de contact Le moteur tourne Erreur de dmarrage distance 8 7 6 5 4 3 2 1 No. de clignotements de feux de stationnement un maximum de trois tlcommandes. confirmant ainsi chaque tlcommande additionnelle. Tous les systmes ( lexception de P2WSSR) peuvent reconnatre bouton de verrouillage sur les tlcommandes unidirectionnelles. Les feux de stationnement clignoteront une fois, programmer dautres tlcommandes en pressant sur le bouton (I) sur les tlcommandes bidirectionnelles OU le Programmation de multiples tlcommandes :Aprs la confirmation lumineuse obtenue ltape 2, vous pouvez deux fois pour indiquer la fin du processus de programmation Fin de la programmation:La programmation est une squence minute. Les feux de stationnement clignoteront t complte avec succs. sur les tlcommandes unidirectionnelles, dans les deux cas pendant 0,5 secondes. Les feux de stationnement clignoteront une fois, indiquant que lopration a TAPE 2:Deux secondes aprs avoir tourn la cl (on/off) 5 fois, pressez le bouton (I) sur les tlcommandes bidirectionnelles OU le bouton de verrouillage secondes. Les lumires de stationnement clignoteront une fois quand lopration aura russi. TAPE 1:Activez le mode Valet/programmation en tournant manuellement la cl sur le contact, entre les positions Acc et On, cinq fois lintrieur de 7 habituellement fait chez votre reprsentant autoris. IMPORTANT:Toutes les tlcommandes Firstech doivent tre programmes dans le systme avant deffectuer nimporte quelle opration. Ceci est Programmation de tlcommandes unidirectionnelles 4 boutons lumires clignoteront cette fois vous permettant dinterprter lerreur selon le tableau ci-dessous. Si la tlcommande ne russit pas dmarrer le vhicule, les lumires de stationnement clignoteront 3 fois immdiatement. Suite cela, les mmes Programmation de la tlcommande/Routines de programmation Il y a un bon nombre de dispositifs avancs disponibles pour votre systme. Veuillez allez www.compustar.com pour plus de dtails. Diagnostic derreur du dmarrage distance Fonctions gnrales du systme 1 3 By Firstech, LLC By Firstech, LLC 12 sera pas valide si vous ne compltez pas la carte denregistrement au www.compustar.com dans les 10 jours aprs lachat. La garantie du produit sera automatiquement invalide si la date ou le code barre ont t barbouills, manquants ou altrs. De plus, cette garantie ne Votre garantie COMME DCRIT PRCDEMMENT. de lopration de Compustar. MALGR CE QUI EST MENTIONN ICI, LE FABRICANT OFFRE UNE GARANTIE POUR REMPLACER OU RPARER LE MODULE DE CONTRLE DES DOMMAGES ACCESSOIRES, DES DOMMAGES POUR ARRT DE TRAVAIL, PERTES DE PROFITS, PERTES COMMERCIALES ET SEMBLABLES qui pourraient en rsulter Firstech LCC nest pas RESPONSABLE NI NE POURRA TRE PASSIBLE DE POURSUITE POUR TOUT DOMMAGE INCLUS, MAIS NON LIMIT DE DOMMAGES INDIRECTS, droits qui varient dtat en tat. limitation ou lexclusion en ce qui a trait aux dommages accessoires ou indirects. Cette garantie vous confre des droits lgaux spcifiques et vous pouvez avoir aussi dautres Quelques tats ou provinces ne permettront pas de limitations dans la dure de la garantie implicite ou lexclusion ou la limitation de la dure dune garantie implicite ou la UNE GARANTIE LIMITE POUR REMPLACER OU RPARER LE MODULE DE CONTR?LE COMME DCRIT PRCDEMMENT. PROFITS, PERTES COMMERCIALES, OPPORTUNITS COMERCIALES ET SEMBLABLES. MALGR CE QUI EST MENTIONN CI-DESSUS, LE FABRICANT OFFRE INCLUS MAIS NON LIMIT, DES DOMMAGES INDIRECTS, DES DOMMAGES ACCESSOIRES, DES DOMMAGES CAUSANT DES ARR?TS DE TRAVAIL, PERTES DE NI LE FABRICANT NI AUCUNE DES ENTITS RELIES AU PRODUIT SERA TENUE RESPONSABLE OU ?TRE PASSIBLE DE POURSUITE POUR TOUT DOMMAGE EN PARTICULIER NI TOUTE AUTRE GARANTIE DE NON-TRANSGRESSION OU BREVET DANS LES TATS UNIS DAMRIQUE NI ? LEXTRIEUR DE CE PAYS. CETTE EXCLUSION INCLUT, MAIS NEST PAS LIMITE PAR TOUTES GARANTIES DE COMMERCE NI AUCUNE AUTRE GARANTIE DADQUATION POUR UN OBJECTIF CONCERNS DANS LE COMMERCE DE CE PRODUIT. DANS LA MESURE PERMISE PAR LA LOI, TOUTES AUTRES GARANTIES SONT EXCLUES PAR LE FABRICANT ET EN OUTRE, CHACUN DES PARTICIPANTS LLC., 21903 68 Avenue South - Kent, WA 98032, USA th pendant la priode de garantie et si le produit savre dfectueux, Firstech LCC aura loption de le rparer ou de le remplacer. propritaire original de lauto pour une priode dun an partir de linstallation. Si lacheteur original retourne le produit au magasin o il a t achet ou le poste prpay Firstech, pendant toute la priode o ce mme propritaire conserve le vhicule dans lequel le systme a t install, lexception de la tlcommande, elle mme, qui est garantie au Firstech, LLC garantit vie lacheteur original que le produit sera libre de tout dfaut de fabrication et main duvre dans des circonstances dutilisation normale, cest--dire, dclenchement de portire/capot/coffre/cl dclenchement de 2e impact Dclenchement de dtecteur doption Situation 6 5 4 No. de bips Une fois lalarme dsactive, aprs quelle a t dclenche, le nombre de bips de la sirne indiquera la zone spcifique. 5 clignotements, repos, aprs rptition 4 clignotements, repos, aprs rptition 3 clignotements, repos, aprs rptition 2 clignotements, repos, aprs rptition ACL montr PANIQUE dclenchement de dtecteur optionnel dclenchement de 2e impact dclenchement de portire/capot/coffre/cl Situation 4 3 2 1 Priority dessous. Quand lalarme est active, lACL clignotera lentement. Pendant que la sirne sonne, lACL indiquera quelle zone a t dclenche, selon le tableau ci-
Garantie vie limite Diagnostic dalarme del usuario para operar este dispositivo. CUATELA: Cambios modificaciones no expresamente aprobadas por la parte responsable del cumplimiento de la norma, pueden anular la autorizacion
(2)este dispositivo puede aceptar cualquier interferencia recibida, incluso interferencia que pueda causar mal funcionamiento al equipo.
(1)este dispositivo no puede causar interferencia daosa. Este dispositivo est sujeto a la seccion 15 de las reglas de FCC. El funcionamiento est sujeto a las siguientes condiciones;
7087A-1WREC340SP 7087A-1WREC320SP 7087A-R762WSS 7087A-1WREC310433 7087A-R500A433 7087A-R960A433 7087A-R961WSS 7087A-R762WSS 7087A-R961AM 7087A-762F907 VA5REC340-1WSP VA5REC320-1WSP VA5JR762WSS VA5REC310-1W433 VA5JR500-1A433 N/A VA5JR961-1WSS VA5JR762WSS VA5JR961AM VA5JR762F907 1WG9R-SP 1WG7R-SP 1WG8R-SS 1WG6R-AM FTX1400R-AM VZ1WAMR-960 1WG5R-SS 1WSS-25 1W900SHR-961 1W900FMR-Pro 5532A-J1WPLL4R 7087A-1WFM4R 7087A-R150F433 7087A-R150A433 7087A-R763A433 7087A-R762A433 7087A-R5120AM 7087A-R1800AM 5532A-JR1600 5532A-J1WAM4R N99J1WPLL4R O44J1WFM4R N/A O44JR1700A433 VA5JR763AM433 VA5JR762A433 O44JR5120AMSH O44JR1800A433 O44JR1600 O44J1WAM4R 1W900FMR 1WFMR-Fiance NU2000R NU1000R 1WAMR-763 1WAMR-762 1WAMR-1900 1WAMR-1800 1WAMR-1600 1WAMR-Fiance
(Internacional Solamente)
(Solamente EEUU )
(Internacional Solamente)
(Solamente EEUU ) No. ID IC No. ID FCC Remoto No. ID IC No. ID FCC Remoto Aplicable al remoto (s siguiente) A todos los remotos de 1 Via con 4 Botnes Manual de Usuario www.compustar.com www.firstechonline.com www.firstechonline.com www.compustar.com Applicable to the following remote(s): All 1Way 4Button Remote Remote 1WAMR-Fiance 1WAMR-1600 1WAMR-1800 1WAMR-1900 1WAMR-762 1WAMR-763 NU1000R NU2000R 1WFMR-Fiance 1W900FMR FCC ID Number
(US Only) O44J1WAM4R O44JR1600 O44JR1800A433 O44JR5120AMSH VA5JR762A433 VA5JR763AM433 O44JR1700A433 N/A O44J1WFM4R N99J1WPLL4R IC ID Number
(International Only) 5532A-J1WAM4R 5532A-JR1600 7087A-R1800AM 7087A-R5120AM 7087A-R762A433 7087A-R763A433 7087A-R150A433 7087A-R150F433 7087A-1WFM4R 5532A-J1WPLL4R Remote 1W900FMR-Pro 1W900SHR-961 1WSS-25 1WG5R-SS VZ1WAMR-960 FTX1400R-AM 1WG6R-AM 1WG8R-SS 1WG7R-SP 1WG9R-SP FCC ID Number
(US Only) VA5JR762F907 VA5JR961AM VA5JR762WSS VA5JR961-1WSS N/A VA5JR500-1A433 VA5REC310-1W433 VA5JR762WSS VA5REC320-1WSP VA5REC340-1WSP IC ID Number
(International Only) 7087A-762F907 7087A-R961AM 7087A-R762WSS 7087A-R961WSS 7087A-R960A433 7087A-R500A433 7087A-1WREC310433 7087A-R762WSS 7087A-1WREC320SP 7087A-1WREC340SP
Introduction Thank you for purchasing a Firstech system for your vehicle. In order to truly enjoy the benefits of this system, we recommend that you thoroughly review the following manual. Please note that this manual applies to the 1 Way-4 Button Non Liquid Crystal Display Remotes, regardless of whether you purchased the alarm only, starter only or alarm/starter combination. There are certain features listed in this manual that may not be available for your system. There may also be features listed in this manual that require additional installation or programming before they are active. If you have any questions, please contact the original place of purchase. For further information you may also contact our customer support center by calling 888-820-3690. Warranty Coverage Caution: The Manufactures warranty will be voided if this product is installed by anyone other than an authorized Firstech dealer. For complete warranty details visit www.compustar.com or the last page of this manual. Firstech remotes carry a 1 year warranty from original date of purchase. Warranty registration can be completed online by visiting www.compustar.com. Please complete the registration form within 10 days of purchase. We do not include a mail in warranty registration card with each unit. Registration must be done online. To verify that an authorized dealer installed your system, we highly recommend that you keep a copy of the original proof of purchase, such as the dealer invoice in a safe place. By Firstech, LLC 2 By Firstech, LLC 2 3 By Firstech, LLC Quick Reference
When servicing or loaning your vehicle to others, the system should be in Valet mode. Valet mode prevents the system from remote starting and disables all alarm functions. IMPORTANT: While in Valet mode the remote will still control power lock and unlock systems. The parking lights will not flash. The system can be put into valet one of three ways:
1. Turn the vehicles key to the ignition on position and tap buttons simultaneously for 0.5 seconds. The parking lights will flash once and/or siren chirp once to confirm the system is in valet mode. Repeat this process to take the system out of valet mode. The parking lights will flash twice and/or siren chirp once to confirm the system is out of valet mode. 2. If you dont have your remote control, you can put the system into valet by turning the ignition key on and then off five times within 7 seconds. The parking lights will flash once to confirm the system is in valet mode. Shortly after the first flash, the parking lights will flash twice. A remote control is required to take the system out of valet mode. IMPORTANT: If your system is set up for a secure valet option, you will not be able to put the system into valet until the proper code has been entered to the secure valet switch. 3. If your system is set up with the secure valet switch (optional), you will not be able to put the system into valet until the proper code has been entered to the secure valet switch. The secure valet switch is the small button with bright blue LED on the front and if installed is the only way to override the alarm and/or remote start. The default code is (3, 3).
The only regular maintenance this system requires is remote control battery replacement. No programming is required when replacing the battery. First, remove the small Phillips screw located on the back of the remote. Once the screw has been removed, gently pull the remote apart taking care to not damage the circuit board. 1 Way remote batteries differ among the models. Your battery size should be listed on the battery. Replacements can be purchased from your local Firstech dealer or an electronics store.
Button Duration Additional Function / Description Programming Required 0.5 seconds 3.5 seconds 0.5 seconds 0.5 seconds 2.5 seconds no no no no no Locks doors and/or arms alarm. Panic/vehicle locater (flashes vehicles parking lights and sounds siren and horn). Unlocks doors and/or disarms alarm. Aux 1. Triggers the auxiliary 1 output
(most commonly used for rear defrost or window roll-down) Trunk pop. Triggers the trunk release output and opens the vehicles trunk. By Firstech, LLC 4 5 By Firstech, LLC Button Duration Additional Programming Required Function / Description Aux 2. Triggers the auxiliary 2 output (most commonly used for rear defrost or window roll-down) Activates the remote start. Repeat and remote start will shut off. Turns siren on/off (Note: With the siren off, it will still sound in the event the alarm is triggered) Valet mode (see Valet Mode section for details) Turns the shock sensor on/off. (Alarm or Alarm/Starter systems only) Drive lock. Activates ignition controlled door locks. 0.5 seconds 2.5 seconds 0.5 seconds 0.5 seconds 2.5 seconds 0.5 seconds 0.5 seconds 0.5 seconds 0.5 seconds 2.5 seconds no no no no no yes no yes yes no Activates passive arming (vehicle will arm/lock 30 seconds after the vehicle is disarmed)
Activates timer start mode. Timer start mode has multiple programmable settings:
duration settings, temperature settings and self start settings. Activates the built in Turbo timer function. Additional installation is required when using this feature on automatic transmission vehicles. Car Check (updates vehicle status on remote pager) / Secure Auxiliary Press the button for 2.5 seconds to remote start an automatic transmission vehicle. If you are in range and if the vehicle is ready to remote start, the parking lights will flash once and/or siren chirp once to indicate that the remote start command has been successfully transmitted. If you are in range and the parking lights flash and/or vehicles siren chirps three times, there is a remote start error. Refer to the remote start error diagnostic at the end of this manual for details. The remote start run time can be programmed for 3, 15, 25, or 45 minutes - ask your local Firstech dealer to adjust Option 2-7 if you would like a run time other than 15 minutes (default). IMPORTANT: Your vehicles key must be inserted into the ignition and turned to the on position prior to driving your vehicle. If the foot brake is depressed prior to the key being in the on position, the vehicle will shut off. By Firstech, LLC 6 7 By Firstech, LLC General System Functions The remote transmitter functions have been predetermined and programmed from the factory. The four button configuration allows for many functions to be performed through a series of tapping, holding and / or multiple presses of buttons. Although Firstech remotes have numerous button functions and capabilities, please keep in mind that the most common functions are performed in one simple step. There are advanced features not described in this manual. Please go to www.compustar.com for more details.
Tap button for 0.5 seconds to lock/arm and unlock/disarm. The LED will flash on your remote. If your vehicle is locked, tap button to unlock; if your vehicle is unlocked, tap button to lock. IMPORTANT: If the alarm has been triggered (Siren is going off), you must wait up to 5 seconds before disarming the alarm - the first button tap will shut off the alarm and the second will unlock/disarm the system. General System Functions
In order to remote start a manual transmission vehicle, the system must first be set in Reservation Mode. Reservation Mode must be set each and every time you want to remote start a manual transmission vehicle. The purpose of Reservation Mode is to leave the transmission in neutral before exiting the vehicle. IMPORANT The transmission must be left in the neutral position. The vehicles door pins must be in working order. Do not install this remote start on a manual transmission vehicle that has a convertible or removable top. The vehicles windows must be rolled up. Do not set reservation mode or remote start with people in the vehicle. Activating Reservation Mode STEP 1: While the vehicle is running, place the transmission in neutral, set the emergency / parking brake, and remove pressure from the foot brake. STEP 2: Remove the key from the vehicles ignition. The vehicles engine should remain running even after the key has been removed. If the vehicle does not remain running make sure your system is not in Valet mode and then contact your local authorized dealer for service. STEP 3: Exit the vehicle and close the door. The vehicles engine should shut off within 10 seconds upon closing the last door. Most motors will shut off instantly upon closing the last door. If the vehicles engine does not shut off, your door trigger may be functioning improperly. Do not use the remote start feature and take your vehicle to a local authorized dealer for service. IMPORTANT: By default, the system will lock/arm the vehicle upon setting reservation mode. Take care to not lock your keys inside the vehicle. Cancelling Reservation Mode Reservation mode will be cancelled for the following reasons;
You did not activate the parking brake prior to turning off the ignition. You released the parking brake after the key was removed from the ignition. You entered valet mode, opened the vehicles door, hood, trunk or set off the alarm. You pressed the foot brake after the key was removed from the ignition.
Hold button for 2.5 seconds to release the trunk or hatch. If you are in range, the vehicles parking lights will flash once and/or siren chirp once indicating that the trunk release command has been successfully transmitted. IMPORTANT: Trunk release is an optional vehicle feature that may require additional parts and labor.
Upon lock/arm and unlock/disarm, you can eliminate vehicles audible confirmation by muting the siren. Normally, the siren will chirp once to indicate the system is locked/armed and twice to indicate the system is unlocked/disarmed. To mute the siren tap buttons simultaneously for 0.5 seconds. IMPORTANT: Even when the siren is muted, it will still go off in the event the alarm is triggered.
Hold buttons simultaneously for 2.5 seconds to turn the shock sensor on and off. The vehicles parking lights will flash once and/or siren chirp once to confirm the shock sensor is on. The vehicles parking lights will flash twice and/or siren chirp twice to confirm the shock sensor is off. IMPORTANT: Turning off the shock sensor also turns off the optional sensor(s). The shock sensor does not recognize impact for 30 seconds after the system has been armed. By Firstech, LLC 8 9 By Firstech, LLC Advanced System Functions Remote Start Error Diagnostic There are lots of advanced features available for your system. Please go to www.compustar.com for more details. Remote Coding / Programming Routine (S) IMPORTANT: Every Firstech remote must be coded to the system prior to performing any operations. All remotes must be coded at the same time.
STEP 1: Activate Valet/Programming mode by manually turning the ignition key on and off (between the Acc & On positions) five times within 7 seconds. The vehicles parking lights will flash once with the successful completion of this step. STEP 2: Within 2 seconds after cycling the ignition for the 5th time, press button (I) on 2 way remotes or the (lock) button on 1 way remotes for 0.5 seconds. The parking lights will flash once to confirm the transmitter has been coded. Exiting Programming: Programming is a timed sequence. The parking lights will flash twice signaling the end of programming mode. Programming Multiple Remotes: After the confirmation flash given in step 2, code additional remotes by pressing button (I) on 2 way remotes or the (lock) button on 1 way remotes. The parking lights will flash once confirming each additional remote. All systems (except the P2WSSR), can recognize up to three remotes. If the remote start fails to start the vehicle, the parking lights will flash three times immediately. Following those three flashes the parking lights will flash again corresponding to the error table. Number of Parking Light Flashes 1 2 3 4 5 6 7 8 Remote Start Error Motor running Key in ignition on position Door open (manual transmission only) Trunk open Foot brake on Hood open Reservation off (manual transmission only) Tach or voltage sensing failure We recommend that you do not attempt any repairs on your remote starter. Contact your dealer or call us directly. By Firstech, LLC 10 11 By Firstech, LLC Alarm Diagnostic Limited Lifetime Warranty While the alarm is armed, the LED will blink slowly. While the siren is going off, the LED will indicate the specific zone that was triggered. Upon disarming the alarm after it has been triggered, the amount of siren chirps will indicate the specific zone. Priority Situation LED On Duty Number of Siren Chirps (If Installed) 1 2 3 4 Door/Hood/Trunk/Key Triggered 2 flash, rest, then repeat 2nd Shock Triggered Optional Sensor Triggered 3 flash, rest, then repeat 4 flash, rest, then repeat 6 5 4 PANIC 5 flash , rest, then repeat N / A By Firstech, LLC 12 Firstech, LLC Warrants to the original purchaser that this product shall be free of defects in material and workmanship under normal use and circumstances for the period of time that the original owner of this product owns the vehicle in which it is installed; except that the remote controller unit for the period of one year from the date of installation to the original owner of this product. When the original purchaser returns the product to the retail store where it was purchased or prepaid postal to Firstech, LLC., 21903 68th Avenue South, Kent, WA 98032, USA within the warranty period, and if the product is defective, Firstech, LLC, will at its option repair or replace such. TO THE MAXIMUM EXTENT ALLOWED BY LAW, ANY AND ALL WARRANTIES ARE EXCLUDED BY THE MANUFACTURER AND EACH ENTITY PARTICIPATING IN THE STREAM OF COMMERCE THEREWITH. THIS EXCLUSION INCLUDES BUT IS NOT LIMITED TO, THE EXCLUSION OF ANY AND ALL WARRANTY OF MERCHANTABILITY AND/OR ANY AND ALL WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE AND/OR ANY AND ALL WARRANTY OF NON-INFRINGEMENT OR PATENTS, IN THE UNITED STATES OF AMERICA AND/OR ABROAD. NEITHER THE MANUFACTURER OF ANY ENTITIES CONNECTED THEREWITH SHALL BE RESPONSIBLE OR LIABLE FOR ANY DAMAGES WHATSOEVER, INCLUDING BUT NOT LIMITED TO, ANY CONSEQUENTIAL DAMAGES, INCIDENTAL DAMAGES, DAMAGES FOR LOSS OF TIME, LOSS OF EARNINGS, COMMERCIAL LOSS, LOSS OF ECONOMIC OPPORTUNITY AND THE LIKE. NOTWITHSTANDING THE ABOVE, MANUFACTURER DOES OFFER A LIMITED WARRANTY TO REPLACE OR REPAIR THE CONTROL MODULE AS DESCRIBED ABOVE. Some states do not allow limitations on how long an implied warranty will last or the exclusion or limitation on how long an implied warranty will last or the exclusion or limitation of incidental or consequential damages. This warranty gives you specific legal rights, and you may also have other rights, which vary State to State. Firstech, LLC. is not RESPONSIBLE OR LIABLE FOR ANY DAMAGES WHATSOEVER, INCLUDING BUT NOT LIMITED TO, ANY CONSEQUENTIAL DAMAGES, INCIDENTAL DAMAGES, DAMAGES FOR LOSS OF TIME, LOSS OF EARNINGS, COMMERCIAL LOSS, LOSS OF ECONOMIC OPPORTUNITY AND THE LIKE that may or may not resulted from the operation of Compustar, Compustar Pro, Arctic Start, Vizion, or NuStart. NOT WITH STANDING THE ABOVE, MANUFACTURER DOES OFFER A LIMITED WARRANTY TO REPLACE OR REPAIR THE CONTROL MODULE AS DESCRIBED ABOVE. Your Warranty The products warranty is automatically void if the date code or serial number is defaced, missing or altered. This warranty will not be valid unless you have completed the registration card at www.compustar.com within 10 days of purchase. 13 By Firstech, LLC 8102REUSL000901 / FT-1W-ES V1.3 By Firstech LLC Version 1.3(C05) Kent, WA 98032 21903 68th Ave S Toll Free : 888-820-3690 Toll Free : 888-820-3690 21903 68th Ave S Kent, WA 98032 By Firstech LLC Version 1.3(C05) 8102REUSL000901 / FT-1W-ES V1.3 3 By Firstech, LLC By Firstech, LLC 2 By Firstech, LLC 2 distribuidor en un lugar seguro. distribuidor autorizado instal su sistema, nosotros recomendamos que usted guarde una copia de la prueba original de compra, como la factura del das de la compra. Nosotros no incluimos una tarjeta de registro de garanta con cada unidad - el registro debe hacerse en lnea. Para verificar que un El registro de la garanta puede completarse en lnea visitando www.compustar.com. Por favor complete la forma del registro dentro de los primeros 10 fecha original de compra. detalles de la garanta visite www.compustar.com o la ltima pgina de este manual. Los remotos de Firstech llevan un 1 ano de garanta, a partir de la Cautela:La garanta del Fabricante ser nula, si este producto es instalado por cualquier persona que no sea un distribuidor autorizado de Firstech. Para
apoyo al cliente llamando 888-820-3690. activos. Si usted tiene cualquier pregunta, por favor acuda al lugar original de compra. Para ms informacin, usted puede contactar nuestro centro de disponibles en su sistema. Tambin puede haber caractersticas listadas en este manual que requieren de instalacin adicional programacin antes de ser sin importar si usted slo compr la alarma, arranque de motor o combinacin de ambos. Hay ciertos rasgos listados en este manual, que quiz no estn completamente lea el siguiente manual. Por favor note que este manual aplica al control remoto de 1 Va de 4 Botones sin pantalla (No Cristal Liquido), Gracias por comprar un sistema de Firstech para su vehculo. Para disfrutar de verdad los beneficios de este sistema, nosotros recomendamos que usted Garanta Introduccin
11
Programando Control Remoto de 1 Va de 4 Botones:
10 9 9 9 9 8 8 7 7
5 5 4
Sensor de Golpes Encender/Apagar Armado/Desarmado Silencioso Liberador de Cajuela Ajustes Modo Reservacin Cancelando Modo Reservacin Activando Modo Reservacin
(Modo de Reservacin) Transmisin Manual Funcin Arranque de Motor Funcin de Arranque Remoto en Transmisin Automtica Cerrar/Armar Activo y Abrir/Desarmar
Funciones Control Remoto 1 Va Mantenimiento al Remoto Reemplazo de Batera Modo Valet
5 By Firstech, LLC By Firstech, LLC 4 Abrir cajuela. Acciona la salida liberadora de cajuela y abre la cajuela del vehculo. Aux. 1. Acciona la salida auxiliar 1 (comnmente utilizada para defroster (desempanante) o bajar ventana elctrica.Aux 1. Abre puertas y/o desarma alarma.
(cuartos) activa sirena y claxon). Pnico/localizador de vehiculo (destella las luces de aparcamiento Cierra puertas y/o arma alarma. No No No No No 2.5 Segundos 0.5 Segundos 0.5 Segundos 3.5 Segundos 0.5 Segundos ProgramacinFuncin / Descripcin Duracin Boton Adicional
sobre la batera. Reemplazos pueden ser adquiridos a su distribuidor de Firstech o a una tienda de electrnica. remoto, cuidando no tocar el circuito impreso. Las bateras del remoto de 1 va, difieren entre otros modelos. El tamano de su batera debe estar impreso Primero, quite el pequeo tornillo tipo Phillips localizado en la parte trasera del remoto. Una vez retirado el tornillo, suavemente separe las tapas del Remoto 1 Va:
al reemplazar la batera. El nico mantenimiento regular que este sistema requiere, es reemplazo de la batera del control remoto. Ninguna programacin se requiere
si es instalado, es la nica manera de anular la alarma y/o la salida de arranque remota. Hasta ser programado, el cdigo predefinido es (3, 3). apropiado sea ingresado al interruptor del modo valet seguro. El interruptor de modo valet seguro, es el botn peque?o con LED luminoso azul en el frente y 3. Si su sistema est programado para la opcin de modo valet seguro (opcional), usted no podr poner el sistema en modo valet, hasta que el cdigo interruptor del valet seguro. su sistema est programado para una opcin de valet seguro, usted no podr poner el sistema en valet hasta que el cdigo apropiado sea ingresado al destello, las luces del aparcamiento (cuartos) encendern dos veces. Un control remoto se necesita para sacar el sistema de modo valet. IMPORTANTE: Si dentro de 7 segundos. Las luces de aparcamiento (cuartos) encendern una vez para confirmar que est en modo valet. Brevemente, despus del primer 2. Si usted no tiene su control remoto, usted puede poner el sistema en valet, girando la llave de ignicin a la posicin ON y despus OFF, cinco veces sistema est fuera de modo valet. sacar el sistema de modo valet. Las luces de aparcamiento (cuartos) encendern dos veces y/o sirena emite un chirrido para confirmar que el segundos. Las luces de aparcamiento (cuartos) encendern una vez confirmando que el sistema est en modo valet. Repita este proceso para 1. En el cilindro de la ignicin, gire la llave del vehculo a la posicin ON y presione los botones del remoto simultneamente durante 0.5 El sistema puede ponerse en Modo Valet en una de tres maneras:
de aparcamiento (cuartos) no encendern. desactiva todas las funciones de la alarma. IMPORTANTE: Mientras en Modo Valet, el remoto todava controlar seguros elctricos abrir/cerrar. Las luces sistema del arranque remoto y Al llevar su auto al taller o prestar su vehculo a otros, usted debe poner el sistema en Modo Valet. El Modo Valet previene el
Referencia Rpida 7 By Firstech, LLC 2-7, si usted necesita un tiempo de encendido diferente a 15 minutos (valor programado de fbrica). La duracin del tiempo de encendido puede programarse para 3, 15, 25, o 45 minutos - pida a su distribuidor de Firstech que ajuste Opcin Refirase a la seccin diagnstico de error, arranque de motor situada en la ltima pgina de este manual para detalles. Si usted est en rango y las luces de aparcamiento destellan y/o la sirena del vehiculo chirra tres veces, entonces hay un error de arranque de motor. arranque de motor fue transmitido con xito. est listo para arranque de motor, las luces de aparcamiento (cuartos) encendern una vez y/o la sirena chirriar una vez para indicar que el comando de Presione el botn durante 2.5 segundos para encender a control remoto un vehculo de transmisin automtica. Si usted est en rango y si el vehculo
botn silenciar la alarma y el segundo abrir/desarmar el sistema. IMPORTANTE: Si la alarma se ha activado (la sirena sonando), usted debe esperar hasta 5 segundos antes de desarmar la alarma - la primera palmadita al est cerrado con llave, presione el botn para abrir; si su vehculo est abierto, presione el botn para cerrar con llave. Presione el botn durante 0.5 segundos para cerrar/armar y abrir/desarmar. El LED encender en su control remoto. Si su vehculo
tienen numerosas funciones y capacidades, por favor tenga presente que las funciones bsicas se realizan en un solo paso. funciones a ser realizadas a travs de una serie de toques, presiones y/o mltiples presiones en los botones. Aunque los botones de los remotos de Firstech Las funciones del transmisor fueron predeterminadas y se han programado en la fbrica. La configuracin de 4 botones permite la realizacin de varias Funciones Generales del Sistema By Firstech, LLC 6
(actualiza el estado del vehculo en control remoto de pantalla) / Auxiliar Seguro Revisin de Automvil en vehculos de la transmisin automtico. Activa el Temporizador Turbo integrado. Instalacin adicional se requiere al utilizar este rasgo arranque tiene opciones programables: duracin, temperatura y arranque automtico. Activa modo temporizador de la salida de arranque remoto. El modo temporizado de Activa armado pasivo (vehculo arma/cierra 30 seg. despus de que el vehculo sea desarmado) Conducir cerrar. Activacin de controlador de seguros elctricos con ignicin. Activa/Desactiva sensor de golpes. (Sistemas de Alarma sistemas de Alarma/Arrancador solamente) Modo valet (vea Seccin del Modo Valet para detalles)
(Nota: Con los chirridos desactivados, de todos modos sonar la alarma al activarse algn sensor). Activa/Desactiva chirrido sirena Activa la salida arranque remoto. Repita y la salida arranque remoto cesar. o bajar ventana elctrica. Aux. 2. Acciona la salida auxiliar 2 (comnmente utilizada para defroster trasero (desempanante) No Si Si No Si No No No No No 2.5 Segundos 0.5 Segundos 0.5 Segundos 0.5 Segundos 0.5 Segundos 2.5 Segundos 0.5 Segundos 0.5 Segundos 2.5 Segundos 0.5 Segundos Funcin / Descripcin Adicional Programacin Duracin Boton
9 By Firstech, LLC IMPORTANTE:Incluso cuando la sirena es silenciosa, se disparar en el momento que la alarma se active Para silenciar a la sirena, presione botones simultneamente durante 0.5 segundos. sirena chirriar una vez para indicar que el sistema est cerrado/armado y dos veces para indicar que el sistema est abierto/desarmado. En cuanto cierre/arme y abra/desarme, usted puede eliminar la confirmacin audible del vehculo, silenciando la sirena. Normalmente, la
IMPORTANTE:Abrir cajuela es una opcin del vehculo que puede requerir partes adicionales y mano de obra. una vez y/o la sirena chirriar una vez, indicando que la orden de abrir cajuela se ha transmitido con xito. Presione el botn durante 2.5 segundos para liberar la cajuela. Si usted est en rango, las luces de aparcamiento (cuartos) encendern
puertas traseras del vehculo, cajuela o cofre antes de que el sistema active reservacin y pasivamente cierre/arme. Opcin 3:Modo reservacin se activa 10 segundos despus del cierre de la ltima puerta, opuesto a inmediatamente. Esta opcin le permitir acceder a las Opcin 2: No cierra puertas con llave cuando modo reservacin est fijo. Predefinido 1:Cierra puertas con llave cuando modo reservacin est fijo. Las opciones pueden programarse con Opcin 1-6. Se recomienda que las opciones de modo reservacin sean programadas por su distribuidor autorizado Firstech. Opciones para Modo Reservacin Usted solt el freno de emergencia, despus de que la llave fue alejada de la ignicin. Usted entr a modo valet, abri la puerta del vehculo, cofre, cajuela o accion la alarma. Usted presion el pedal del freno de pie, despus de que la llave fue alejada de la ignicin. Usted no activ el freno de emergencia antes de apagar la ignicin. Modo reservacin ser cancelado por las siguientes razones;
Cancelando Modo Reservacin By Firstech, LLC 8 IMPORTANTE: Por estndar, el sistema cierra/arma el vehiculo al activar modo reservacin. Tenga cuidado no dejar sus llaves dentro del vehculo. inadecuadamente. No utilice el arrancador de motor y lleve su vehculo a un distribuidor Firstech autorizado para el servicio. motores se apagan instantneamente al cerrar la ltima puerta. Si el motor del vehculo no se apaga, el interruptor de la puerta puede estar funcionando PASO 3:Salga del vehculo y cierre la puerta. El motor del vehculo debe apagarse 10 segundos despus de cerrar la ltima puerta. La mayora de los no sigue encendido, cercirese que no est en Modo Valet y acuda con su distribuidor Firstech autorizado para el servicio. PASO 2:Retire la llave del cilindro de ignicin del vehculo. El motor del vehculo debe permanecer encendido, aun despus de retirar la llave. Si el vehculo pie. PASO 1:Mientras el vehculo est encendido, ponga la transmisin en neutral, ponga el freno/palanca de emergencia, y quite presin sobre el pedal del freno de Activando Modo Reservacin No active modo de reservacin arranque remoto con personas dentro del vehculo. Los interruptores de las puertas del vehculo deben estar funcionando. No instale este arrancador remoto en un vehculo de transmisin manual que tenga un toldo convertible o trasladable. Las ventanas del vehculo deben estar arriba (cerradas). La transmisin debe quedar en la posicin neutral IMPORANT usted quiera encender su vehculo de transmisin manual a control remoto. El propsito de Modo Reservacin, es dejar la transmisin en neutral, antes de salir del vehculo. Para encender un vehculo de transmisin manual a control remoto, el sistema debe ponerse primero en Modo Reservacin. El Modo Reservacin debe ponerse cada vez que
freno de pie es presionado antes de girar la llave, en la ignicin, en la posicin de ON, el vehculo se apagar. IMPORTANTE:La llave de su vehculo debe insertarse en la ignicin y debe girarse a la posicin de ON antes de manejar su vehculo. Si el pedal del 11 By Firstech, LLC By Firstech, LLC 10 pueden reconocer hasta tres remotos (excepto el modelo 2WSSR). luces de aparcamiento (cuartos) encendern una vez confirmando cada remoto adicional. Todos los sistemas adicionales presionando el botn (I) en control remoto de 2 Vas o el botn (lock) en control remoto de 1 Va. Las Programando Varios Remotos:Despus del destello de confirmacin en el paso 2, codifique remotos encendern dos veces al trmino de modo programacin. Para Salir de Programacin:Programacin es un suceso cronometrado. Las luces de aparcamiento (cuartos) confirmar que el transmisor ha sido codificado. de 2 Vas o el botn (lock) en control remoto de 1 Va una vez durante 0.5 segundos. Las luces de aparcamiento (cuartos) encendern una vez para PASO 2:Dentro de un periodo de 2 segundos, despus del transcurso del ciclo de la ignicin en el 5to intento, presione el botn (I) en control remoto veces antes del trmino de 7 segundos. Las luces del aparcamiento (cuartos) encendern una sola vez indicando paso exitoso. PASO 1:Active modo Valet/Programacin girando la llave del cilindro de ignicin ON y OFF (entre Acc y posicin ON, Apagar y Prender) cinco codificarse al mismo tiempo IMPORTANTE: Cada Control Remoto Firstech debe codificarse al sistema antes de realizar cualquier operacin. Todos los control remoto, deben
Codificando Control Remoto / Rutina de Programacin por su distribuidor autorizado Firstech, para ser activas. La siguiente seccin explica las funciones avanzadas del sistema. Muchas de estas funciones requieren pasos mltiples o programacin adicional, hecha Funciones Avanzadas del Sistema Por favor note que el sensor de golpes no reconoce ningn impacto hasta el trmino de 30 segundos, despus de armado el sistema. IMPORTANTE: Apagando el sensor de golpes, lo mismo sucede con el sensor opcional. luces de aparcamiento (cuartos) encendern dos veces y/o sirena chirriar dos veces para confirmar que el sensor de golpes est apagado. aparcamiento (cuartos) encendern una vez y/o la sirena chirriar una vez para confirmar que el sensor de golpes est encendido. Las Presione los botones simultneamente durante 2.5 segundos para encender y apagar el sensor de golpes. Las luces de
13 By Firstech, LLC By Firstech, LLC 12 complete la tarjeta de registro y la envi a www.compustar.com dentro de los primeros 10 das de la compra. La garanta del producto es automticamente nula, si el cdigo de la fecha o el nmero de serie es borrado, perdido o alterado. Esta garanta no es vlida, a menos que usted Su Garanta
(CEREBRO) COMO DESCRITO ANTERIORMENTE. Start, Vizion, o NuStart. Sin embargo, el FABRICANTE OFRECE UNA GARANTA LIMITADA PARA REEMPLAZAR REPARAR EL MDULO DE CONTROL COMERCIAL, LA PRDIDA DE OPORTUNIDAD ECONMICA Y SIMILARES que puedan ser resultado no, del funcionamiento de Compustar, Compustar Pro, Arctic CONSIGUIENTE, DANOS Y PERJUICIOS INCIDENTALES, DA?OS Y PERJUICIOS POR LA PRDIDA DE TIEMPO, LA PRDIDA DE GANANCIAS, PRDIDA Firstech, LLC. No es OBLIGADO o RESPONSABLE POR CUALQUIER DANO Y PERJUICIO, INCLUYENDO PERO NO LIMITADO A, CUALQUIER DA?O Y PERJUICIO de danos y perjuicios incidentales o consiguientes. Esta garanta le da derechos legales especficos, y usted tambin puede tener otros derechos que varan de Estado en Estado. Algunos estados no permiten limitaciones en la duracin de una garanta implcita o la exclusin o limitacin, en cunto tiempo una garanta implcita durar o la exclusin o limitacin PARA EL REEMPLAZO O REPARACIN DEL MDULO DE CONTROL (CEREBRO) COMO DESCRITO ANTERIORMENTE. COMERCIAL, LA PRDIDA DE OPORTUNIDAD ECONMICA Y SIMILARES. A PESAR DE LO ANTERIOR, EL FABRICANTE OFRECE UNA GARANTA LIMITADA CONSIGUIENTES, DA?OS Y PERJUICIOS INCIDENTALES, DA?OS Y PERJUICIOS POR LA PRDIDA DE TIEMPO, LA PRDIDA DE GANANCIAS, PRDIDA SER RESPONSABLE , U OBLIGADO POR CUALQUIER DA?O O PERJUICIOS , INCLUYENDO PERO NO LIMITANDO A, CUALQUIER DA?O Y PERJUICIOS DE NO-INFRINGIR LAS PATENTES O, EN LOS ESTADOS UNIDOS DE AMRICA Y/O EN EL EXTRANJERO. EL FABRICANTE, NI CUALQUIER OTRA ENTIDAD MERCANTILES Y/O CUALQUIERA Y TODAS LAS GARANTAS DE APTITUD PARA UN PROPSITO PARTICULAR Y/O CUALQUIERA Y TODAS LAS GARANTAS PARTICIPA EN EL PROCESO DEL COMERCIO. ESTA EXCLUSIN INCLUYE PERO NO SE LIMITA A, LA EXCLUSIN DE CUALQUIERA Y TODAS LAS GARANTAS A LA EXTENSIN MXIMA PERMITIDA POR LEY, CUALQUIERA Y TODAS LAS GARANTAS SON EXCLUIDAS POR EL FABRICANTE Y CADA ENTIDAD QUE reparar o reemplazar el equipo. pre-pagado a Firstech, LLC., 21903 68th South, Kent, WA 98032, EE.UU. dentro del periodo de la garanta, y si el producto es defectuoso, Firstech, LLC, a su criterio instalacin, al dueno original de este producto. Cuando el comprador original devuelva el producto a la auto-boutique (minorista) donde fue comprado o enviado con flete de tiempo que el dueno original de este producto posee el vehculo en el que se instala; El control remoto tiene garanta por un periodo de un a?o a partir de la fecha de Firstech, LLC Garantiza al comprador original, que este producto estar libre de defectos en material y fabricacin, bajo uso normal y circunstancias normales por el periodo N / A 4 5 6 Nmero de chirridos de la sirena (Si est instalado) 5 destellos , descansa, repite 4 destellos, descansa, repite 3 destellos, descansa, repite 2 destellos, descansa, repite LED en Servicio PANICO Sensor Opcional Accionado 2nda Guardia Accionada Puerta/Cofre/Cajuela/Llave Accionada Situacin 4 3 2 1 Prioridad la alarma despus de que se haya activado, la cantidad de chirridos de la sirena indicar la zona especfica. Mientras la alarma est armada, el LED destellar lentamente. Mientras la sirena suena, el LED indicar la zona especfica que se accion. Al desarmar Diagnostico de Alarma Nosotros recomendamos que usted no intente ninguna reparacin en su arrancador de motor remoto. Avise a su distribuidor o llmenos directamente. Tach o sensor de voltaje con falla Modo reservacin apagado (solo transmisin manual) Cofre Abierto Pedal del freno presionado Error de Arranque de Motor 8 7 6 5 Cajuela Abierta Puerta abierta (solo transmisin manual) Llave en posicin de ON Motor encendido 4 3 2 1 Luz de Aparcamiento Nmero Destellos de la Error de Arranque de Motor Luz de Aparcamiento Nmero Destellos de la destellos, las luces de aparcamiento (cuartos) encendern varias veces correspondiendo al nmero de error, descrito en la tabla inferior. Si el arrancador de motor no enciende el vehculo, las luces de aparcamiento (cuartos) encendern tres veces inmediatamente. Siguiendo estos tres Garanta de por Vida Limitada Diagnostico de Errores, Arranque Motor Remoto
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2013-01-27 | 433.92 ~ 433.92 | DSC - Part 15 Security/Remote Control Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2013-01-27
|
||||
1 | Applicant's complete, legal business name |
SEGI LIMITED
|
||||
1 | FCC Registration Number (FRN) |
0007994122
|
||||
1 | Physical Address |
Unit J2, 4/F, Block 1, Kinho Industrial Building
|
||||
1 |
HONGKONG, N/A
|
|||||
1 |
China
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
L******@ul.com
|
||||
1 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
VA5
|
||||
1 | Equipment Product Code |
REC340-1WSP
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
Y******** C******
|
||||
1 | Telephone Number |
(852)********
|
||||
1 | Fax Number |
(852)********
|
||||
1 |
s******@gmail.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DSC - Part 15 Security/Remote Control Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Keyless Entry Sysyem | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Testing and Certification Agency of RAPA
|
||||
1 | Name |
W**** K********
|
||||
1 | Telephone Number |
82-31********
|
||||
1 | Fax Number |
82-31********
|
||||
1 |
k******@rapa.or.kr
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15.231 | 433.92000000 | 433.92000000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC