Quick Start Card Basic Plan Premium Plan Thank you for purchasing DroneMobile by CompuStar. Please complete the information on the front and back of this card and visit www.dronemobile.com to register/activate your system and download your DroneMobile smartphone app. GT1000 hardware carries a 1 year manufacturers warranty. You must register online at www.dronemobile.com/
warranty within 10 days of purchase. For Terms and Conditions please view www.dronemobile.com/usersmanuals Please note that some features listed below may not be available. DroneMobile may require additional parts and labor as well as upgrading to the Premium Plan before certain features can be activated. Icon and Description Feature Activated Yes No Lock Unlock This feature locks and/or arms your vehicle. Your vehicle must be equipped with power locks. DroneMobile confirmation window will open if the option is selected. The button will confirm when the lock icon turns green. This feature unlocks and/or disarms your vehicle. Your vehicle must be equipped with power locks. DroneMobile confirmation window will open if the option is selected. The feature confirms when the unlock icon turns green. Start This button activates the start command of your DroneMobile system. If installed, the vehicle will start and run for the set time. When you tap this button again your vehicle will shut off (Must wait at least 1 minute ). Siren This button activates the panic and/or lights flash action of your DroneMobile. This function requires additional parts and labor. Trunk This button activates the trunk pop on your vehicle. This function requires additional parts and labor. Auxiliary 1: Feature Auxiliary 2: Feature Auxiliary functions can operate many different features on your vehicle from power sliding doors to power window roll-up and down. Quick Start Card Basic Plan Premium Plan DroneMobile App Icon Click on this icon to open DroneMobile. When the app loads the Home screen will remain dim until it connects to your vehicle. Once connected you can begin using all the features of DroneMobile. Important: Not all features on DroneMobile are available. Please check with your place of purchase for details and/or installation costs. Home Icon Alerts Icon Map Icon The Home Icon houses the main DroneMobile control screen. Here you can find your Lock, Unlock, Start/Stop, Trunk Pop, Panic, Aux 1, and Aux 2 buttons. When you tap a button it will dim. Once your phone receives confirmation of that feature the icon will turn green. Click on this icon to bring up your Alerts screen. This screen will show all alerts you have set on your phone from speed violations to any and all alarm triggers from your system. The Map Icon opens the GPS Tracking portion of DroneMobile. Here you can view your vehicle from a map showing the approximate address its located at. You can have DroneMobile plot directions from your phone to your vehicle and can view stats such as vehicle temperature. This feature is not included in the standard plan. You have to upgrade to the Premium Plan for this feature. Settings Icon Click on the Settings Icon to customize your DroneMobile system. Here you can change your login password, adjust Notification Settings, select different vehicles, and change your Preference Settings. Registration Information Please complete the information below and place the ID Sticker in the box to the right. The ID sticker is located on the GT1000 Module. All of the information below is used to complete your registration on www.dronemobile.com. Welcome to the World of DroneMobile. First Name:
Address:
Last Name:
Phone Number:
Email Address:
City|State|Zip:
Province:
Country:
Place ID Sticker Here
*Sticker is located on GT1000 module Quick Start Card SEGI R&D GT1000 Operation Manual 1.3 Electrical Operating Voltage Power Consumption
+12 ~ +24V Active Power save 1.4 Environment Temperature Operating : -20C ~ +60C Storage : -45C ~ +85C Humidity 0 ~ 95RH @ 40C
< 50 mA (avg) @ 12V
< 20 mA (avg) @ 12V 1.5 Outlook Size Weight Color 98.4mm x 66.1mm x 20.5mm 78.9g Black Quick Start Card
G S M G P R S G P S
F M R a d i o W i r e d c o n n e c t Quick Start Card 1.7 Connector and Harness Specification Quick Start Card 2. Package & Accessory(TBD) Item Main set(GT1000) Harness Cable User Manual Quick Guide Gift Box Description Remark 1EA SEGI OEM Soft cover 1page 1box Default 2.1 Basic GT1000 Main package Quick Start Card 2.2 Optional Accessory External GPS Antenna + Pad Optional harness Quick Start Card 3. LED Indicator 3.1 Description Item GSM/GPRS GPS Color Blue Green Solid Blinking OFF Blinking ON Status Description Traffic state Idle state 3 Times flashing Good GPS signal Bad GPS signal Quick Start Card 3.2 GSM/GPRS Status LED operation Quick Start Card 4. SMS Interface ( Exclude USA) 4.1 Programming GT1000 unit and Transmitters. The main controller system can memorize one GT1000 unit and two transmitters. In order to install GT1000 unit and transmitters, following process is needed. Note. In order to install GT1000 unit to vehicle, the magicar 7 or upper system is needed. Note. The magicar 7 or upper system user does not need firmware update to install GT1000 unit. 1) In the system is disarm and ignition ON condition, press the button of the RPS sensor for 2 seconds. The system will flash light once. 2) Within 5 seconds, press the button of the RPS sensor. The system will flash light twice. 3) After 5 seconds, the LED of the RPS sensor will turn on. 4) Within 5 seconds, press the button 1 of first transmitter for 0.5 second. If the first transmitter is installed successfully, the system will flash light once. 5) Within 5 seconds, press the button 1 of second transmitter for 0.5 second. ( If there is no second transmitter to program, please press again the button 1 of first transmitter for 0.5 second.) If the second transmitter is successfully installed, the system will flash light once. 6) Just wait for 5seconds, then the system will flash light twice and the system exits from the remotes program mode. Quick Start Card 4.2 SMS Instruction table The GT1000 unit can be configured, controlled and values can be read from it remotely using the SMS messages. SMS message in the following form has to be sent to the phone number of SIM card inserted in the unit:
XXXXCommand P Parameter value ex) 0, 1, ?.... Space ( In the following description the _ means space ) Key word of the command or name of input, 4 digits of Password set in configuration output, or set in configuration The default value of Password in GT1000 from production, or after initialization by INIT command is set to 1234 (Note. the password in GT1000 and PIN on the SIM card are not the same number) There is no difference between small and capital letters used in the command Parameter values are for example: 0= switch off; 1= switch on; ?= ask setting;
A reply or a confirmation of a command performance will be sent back to the number that the command came from, the reply will include the command used and relevant parameter value If a phone number is used as a parameter, it is recommended to enter such number in international format such as +71234567890 Quick Start Card 4.3 Examples:
Send the following text in a SMS message to the phone number of the SIM card inserted in the GT1000 unit that has Password set in configuration to 1234:
returns a message to the mobile phone with value of prepaid credit at the SIM card, if it is possible to find out returns SMS message with text containing the current GPS geographical coordinates, if available sets password to 4321 1234PWD_4321 (or 1234205_4321) 1234BALANCE (or 1234202) 1234GPSD (or 1234303) 1234Arm (or 1234001) activate arm with lock 1234Start (or 1234102) activate remote start 1234SNS_0 (or 1234041_0) 1234Learn_2_+71234567890 (or 1234201_2_+71234567890) sets phone number memory #2 +71234567890 shock sensor off Quick Start Card 4.3 Examples:
Send the following text in a SMS message to the phone number of the SIM card inserted in the GT1000 unit that has Password set in configuration to 1234:
returns a message to the mobile phone with value of prepaid credit at the SIM card, if it is possible to find out returns SMS message with text containing the current GPS geographical coordinates, if available sets password to 4321 1234PWD_4321 (or 1234205_4321) 1234BALANCE (or 1234202) 1234GPSD (or 1234303) 1234Arm (or 1234001) activate arm with lock 1234Start (or 1234102) activate remote start 1234SNS_0 (or 1234041_0) 1234Learn_2_+71234567890 (or 1234201_2_+71234567890) sets phone number memory #2 +71234567890 shock sensor off Quick Start Card Category No Alphanumeric
[PASSWORD+]
Numeric
[PASSWORD+]
Description 1.Instruction 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ARM DISARM STATUS PANIC START STOP TRUNK CHN1_1 CHN2_1 VALET_1 VALET_0 SNS_1 SNS_0 TILTS_1 TILTS_0 001 002 004 101 102 120 103 104 023 013 031 014 041 015 051 Arm/Lock/Start alarm Disarm/Unlock/Stop alarm System status checking Panic/Jack Stop mode on Remote Start of engine Remote Stop of engine Open trunk Additional channel 1 ON Additional channel 2 ON VALET mode ON VALET mode OFF Shock sensor ON Shock sensor OFF Tilt sensor ON (TAIGA system only) Tilt sensor OFF (TAIGA system only) Quick Start Card TMR_1 TMR_0 TRSM_1 TRSM_0 MONITER SPK HELP1 16 17 18 19 20 21 22 024 042 016 061 071 081 199 Engine start by timer ON Engine start by timer OFF Enable transmitter Disable transmitter Saloon monitoring Saloon speak Command & Hot key Information of Instruction Quick Start Card LEARN_X_YYY... 201_X_YY...
(X : index from 2 to 4, Y: Phone number in international Learning Pager LEARN_X_D LEARN_X_?
LEARN_?
BALANCE 202_X 203_X 204 211 SPKVOL_XX 221_XX format) Delete phone number X Query phone number X Query all phone number Speaker Volume Control xx : 00 ~ 99 SPKVOL_?
222 Speaker Volume Query PWD_XXXX 231_XXXX Change of PASSWORD CFMSG_1 CFMSG_0 HELP2 VERSION GSM GPSD GGA POWER TEST HELP3 241 242 299 301 311 321 322 331 341 399 Enable confirm(OK) message Disable confirm(OK) message Command & Hot key Information of Configuration Modem / Code version information GSM x Balance y Cell z Name Signal q Name of GSM network Balance of credit on SIM card of connected GSM cell (BTS) Signal strength (0-32, 32 = maximum) Query GPS data Check GPS Power x Batt. y Check GSM/ POWER/ GGA Command & Hot key Information of Checking service 1 2 3 4 6 7 8 9 10 11 12 1 2 3 4 5 6 7 2.Configuration 3. Checking Quick Start Card 4.4 SMS Alarm and response message table Category NO SMS Instruction Numeric
[PASSWORD+]
Description 1 2 3 4 5 6 7 8 9 10 11 12 1 2 ALARM BY IGNITION ALARM BY DOORS ALARM BY TRUNK ALARM BY HOOD ALARM BY SHOCK SENSOR PREALARM BY SHOCK SENSOR ALARM BY TILT SENSOR CAR BATTERY REMOVED CAR CALL PAGER BATTERY LOW LEVEL ALARM BY EMERGENCY CALL BALANCE LOW OK FAIL (Error Reason) 401 402 403 404 405 406 407 408 409 410 411 412 1. Alarm 2. Response Alarm by Ignition Trigger Alarm by Door Trigger Alarm by Trunk Trigger Alarm by Hood Trigger Alarm by Shock Sensor Prealarm by Shock Sensor Alarm by Tilt Sensor (TAIGA system only) Battery of Vehicle was removed Car Call Battery level of Pager is low Alarm by emergency call Low prepaid credit N/A N/A Successfully Command or Hot key was executed Command or Hot key was not executed After alarm is triggered user can stop alarm by using Arm/Disarm SMS command or just phone call to GT1000 unit by using authorized phone. Quick Start Card 5. DATA Interface The device always connect data network for immediate connection. 5.1 Controls Quick Start Card 5.1 Controls Get Location, Live track, Remote start, lock, unlock, siren, trunk release, Aux1, Aux2, History Log 5.2 Alert Displays alerts that are originated from GT1000 a) Alarm Alerts : hood, door, trunk, shock II, Analog Alarm In b) Regular Alerts : RPS, Shock I, speed violation, Curfew violation, POI Alert, Geo-fence alert, Ignition on/off 5.3 Settings a) Notification Setting : Alarm/regular alerts, low battery, Engine on/off, Maintenance reminder, speed violations, Curfew violations, POI Violations, Geo-fence violation b) Controller Settings : Siren, shock, turbo timer, passive arming, valet mode, drive lock c) Maintenance reminder : Mileage Quick Start Card 6. Type Approval 6.1 PTCRB Certification PTCRB certification testing Pre-conformance and conformance testing (RF, RRM and Protocols) Regulatory testing (RF, EMC & Safety) SAR, OTA & RF performance testing Interoperability testing Performance testing Field Trials, SIM, SATK, A-GPS, MMS, Supplementary services, etc. Network operators acceptance testing This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interference in aresidential installation. This equipment generates, uses and can radiate radiofrequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user isencouraged to try to correct the interference by one or more of the following Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modi cations to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may notcause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum 20 cm between the radiator and your body. IC Warning This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.L'exploitation est autorise aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement.