Book_XXXXXX_0308_Sp6.book Seite 1 Mittwoch, 6. Februar 2008 10:59 10 MX W1 Bedienungsanleitung Instructions for use Notice demploi Istruzioni per luso Instrucciones de uso Gebruiksaanwijzing Manual de utilizao Book_XXXXXX_0308_Sp6.book Seite 2 Mittwoch, 6. Februar 2008 10:59 10 Book_XXXXXX_0308_Sp6.book Seite 1 Mittwoch, 6. Februar 2008 10:59 10 English Deutsch Franais Italian Espaol Nederlands Portugues Book_XXXXXX_0308_Sp6.book Seite 2 Mittwoch, 6. Februar 2008 10:59 10 Book_XXXXXX_0308_Sp6.book Seite 1 Mittwoch, 6. Februar 2008 10:59 10 Contents Important safety instructions ............................................. 2 MX W1 digital wireless earphone system ......................... 4 Delivery includes .................................................................... 4 Product overview ................................................................... 5 LED indications of the devices ...................................................6 Putting the MX W1 into operation ..................................... 6 Charging the MX W1 ...................................................................6 Associating the earphones to the transmitter (Pairing) .....9 Setting up your MX W1 for usage ......................................... 12 Using the MX W1 ................................................................. 14 Switching the earphones on/off ............................................ 14 Switching the transmitter on/off .......................................... 15 Putting on the earphones ....................................................... 16 Care and maintenance ........................................................ 17 Get the most out of your Sennheiser MX W1! ................ 19 Troubleshooting ................................................................... 20 Accessories and spare parts ............................................... 22 Specifications ........................................................................ 23 Manufacturer declarations ................................................. 24 1 Book_XXXXXX_0308_Sp6.book Seite 2 Mittwoch, 6. Februar 2008 10:59 10 Important safety instructions The MX W1 has been manufactured according to the accepted rules of safety and current technology. However, there is still a danger of damage to equipment if the following general safety instructions are not complied with. Please read these instructions for use carefully and completely before using the devices. Make these instructions for use easily accessible to all users at all times. Always include these instructions for use when passing the devices on to third parties. Do not use the devices in situations which require special attention (e.g. in traffic or when performing skilled jobs). Always keep the devices dry and do not expose them to extreme temperatures (normal operating temperatures: 0 C to 40 C). Use the devices with care and store them in a clean, dust-free environment. Switch off the devices after use to conserve battery power. Remove the batteries if the earphones will not be used for extended periods of time. Protect your hearing from high volume levels. Sennheiser earphones also sound exceptionally good at low volumes. Use only Sennheiser supplied charging cables and power supply units. Intended use of the devices Appropriate use of the devices includes:
having read and understood these instructions, especially the section Important safety instructions, using the devices within the operating conditions and limitations described in this instruction manual. 2 Book_XXXXXX_0308_Sp6.book Seite 3 Mittwoch, 6. Februar 2008 10:59 10 Safety instructions for Lithium-Ion rechargeable batteries If abused or misused, rechargeable batteries may leak. In extreme cases, they may even present a heat hazard fire hazard explosion hazard smoke and gas hazard Please understand that Sennheiser does not accept liability for damage arising from abuse or misuse. Keep away from children. Do not heat above 70C/158F, e.g. do not expose to sunlight or throw into a fire. Do not expose to moisture. Do not short-circuit. Do not mutilate or dismantle. Do not get fully charged but unpacked rechargeable batteries mixed up. Do not continue to use defective rechargeable batteries. Only use original Sennheiser rechargeable batteries. Observe correct polarity. Switch rechargeable battery-
powered devices off after use. Remove rechargeable batteries when the unit is not used for extended periods of time. Only charge rechargeable batteries with the appropriate Sennheiser chargers. When not using rechargeable batteries for extended periods of time, charge them regularly (about every three months). Only charge rechargeable batteries at ambient temperatures between 10C and 40C. Immediately remove rechargeable batteries from obviously defective devices. Dispose of rechargeable batteries at special collection points or return them to your specialist dealer. 3 Book_XXXXXX_0308_Sp6.book Seite 4 Mittwoch, 6. Februar 2008 10:59 10 MX W1 digital wireless earphone system Thank you for purchasing MX W1 - Sennheiser's completely digital wireless earphone system. We trust that you will enjoy using it and that it will satisfy your expectations. The MX W1 is simple to operate. These instructions for use have been designed to help you get started. Please take some time to read them carefully so as to ensure your utmost listening pleasure. Enjoy your new MX W1!
Delivery includes 1 MX W1-T transmitter 2 MX W1-R earphones (left/right) incl. earpads (1 pair, foam) twist-to-fit pads (3 pairs: size S/M/L) 1 MX W1-C docking station 1 carrying case 1 elastic fabric strap 4 rubber bands (2 x S/2 x L) 1 charging cable with USB plug 1 power supply unit with 4 country adaptors (US/UK/EU/AU) 1 instructions for use 4 Book_XXXXXX_0308_Sp6.book Seite 5 Mittwoch, 6. Februar 2008 10:59 10 Product overview Earphones Twist-to-fit pad Speaker LED (orange/blue) Operation/pairing button of the earphone 2.5 mm charging jack Battery compartment Transmitter Operation/pairing button of the transmitter Reset button LED (orange/blue) 2.5 mm charging jack Connecting cable with 3.5 mm stereo jack plug Dowel pin 5 Book_XXXXXX_0308_Sp6.book Seite 6 Mittwoch, 6. Februar 2008 10:59 10 Docking station Charging compartment for earphones Charging plugs for earphones (inside the charging compartment) LED (orange/red) Charging button 2.5 mm charging jack LED indications of the devices LED orange Charging of a device (see following chapter) Description red blue Docking station: Battery capacity < 5%
Charging of the docking station (see following chapter) Associating the earphones to the transmitter (see page 9) Switching the devices on/off (see page 14) Transmitter/earphones: Battery capacity < 5%
Putting the MX W1 into operation Charging the MX W1 Charge the rechargeable batteries of all MX W1 devices for 3 hours before first use. When the battery is almost flat, the LED , or flashes orange. You then have to charge the device. 0 6 1s 2s Book_XXXXXX_0308_Sp6.book Seite 7 Mittwoch, 6. Februar 2008 10:59 10 Charging the devices To charge the devices (simultaneously or separately):
Connect the charging cable to the power supply unit . Connect the suitable country adaptor to the power supply unit . Connect the charging cable to the charging jack of:
the transmitter and the docking station or the earphones . If you want to charge all devices at one go, insert the into the charging compartments of the earphones docking station. Plug the country adaptor into a wall socket. The batteries are being charged. The corresponding LEDs light up orange. Charge the rechargeable batteries until the LEDs go off
(approx. 2 hours). 7 Book_XXXXXX_0308_Sp6.book Seite 8 Mittwoch, 6. Februar 2008 10:59 10 Note:
Alternatively, you can charge the devices by connecting the USB plug of the charging cable to the USB port of a PC
(see illustration). The transmitter has its own built-in rechargeable battery. So it will not drain your audio devices battery. With a fully charged rechargeable battery, the operating time of the transmitter is approx. 10 hours and of the earphones approx. 3 hours. Charging the earphones on the move When on the move, the earphones can be charged up to three times in the docking station, without the docking station having to be connected to the mains. Insert the earphones into the charging compartments of the docking station. Make sure that the earphones are inserted correctly. Press the charging button to start charging. The rechargeable batteries are being charged. The LEDs and light up orange. Charge the rechargeable batteries until the LEDs go off. 8 Book_XXXXXX_0308_Sp6.book Seite 9 Mittwoch, 6. Februar 2008 10:59 10 Associating the earphones to the transmitter
(Pairing) The MX W1 earphones and transmitter are already paired on delivery. To enable wireless transmission, both the earphones and the transmitter have to recognize each other:
1. Enrollment mode After switch-on, a suitable device is searched. 0 1s 2. Association mode 2s If a suitable device is detected, both devices will exchange device identification information. 0 1s 2s 3. Pairing mode If the exchange of device identification information is possible, the devices automatically try to connect. 0 5s 10s 9 Book_XXXXXX_0308_Sp6.book Seite 10 Mittwoch, 6. Februar 2008 10:59 10 Associating a second pair of earphones to the transmitter With one transmitter you can associate up to two pairs of earphones. If you want to use another pair of earphones, you have to pair your transmitter and the new earphones:
Switch the new earphones off (see page 14). Switch the transmitter and the already paired earphones on
(see page 14). ON ON OFF Switch the transmitter off (see page 14). 4s ON OFF OFF Press and hold the operation/pairing button of the new earphones until the LEDs flash rapidly. OFF ON 7s ON 10 Book_XXXXXX_0308_Sp6.book Seite 11 Mittwoch, 6. Februar 2008 10:59 10 Press and hold the operation/pairing button of the transmitter until the LED flashes rapidly. 7s ON ON ON After approx. 3 seconds, the new earphones are also paired to the transmitter. The LEDs flash blue once every 5 seconds. ON ON ON Note:
The distance between transmitter and earphones should not exceed 1 m during association. Associating the earphones to Kleer compatible devices MX W1 is fully compatible to Kleer wireless standard. For pairing the MX W1 with other Kleer compatible devices, please refer to the preceding chapter and to the user manual of your device in question. 11 Book_XXXXXX_0308_Sp6.book Seite 12 Mittwoch, 6. Februar 2008 10:59 10 Setting up your MX W1 for usage Fixing the transmitter to your audio device Fix the transmitter with the help of:
or one of the rubber bands (see illustration). the fabric strap Connecting the transmitter to your audio device the transmitter You can connect to an MP3 player or any audio device with a 3.5 mm stereo headphone socket:
Connect the stereo plug of the transmitter to the 3.5 mm stereo headphone socket of your audio device. 12 Book_XXXXXX_0308_Sp6.book Seite 13 Mittwoch, 6. Februar 2008 10:59 10 Adjusting the earphones to your ears Sennheisers twist-to-fit system and comfortable earpads allow for the best custom fit enabling you to enjoy seamless high fidelity stereo sound. The perceived sound quality of the earphones depends to a large extent on a correct fit. For best sound enjoyment, please use the supplied earpads and twist-to-
fit pads. If the pre-mounted twist-to-fit pads (size M) do not fit your ear, use the smaller or larger ones. Carefully remove the twist-to-fit M L S pads from the earphones. Mount the new twist-to-fit pads to the earphones. Pull the earpads speakers. over the 13 Book_XXXXXX_0308_Sp6.book Seite 14 Mittwoch, 6. Februar 2008 10:59 10 Using the MX W1 To switch the system on, proceed as follows:
1. Switch your audio device on. 2. Switch the earphones on (see following chapter). 3. Switch the transmitter on (see page 15). 4. Put the earphones on (see page 15). You will hear the sound from your sound source. Switching the earphones on/off To switch the earphones on:
Remove the earphones from the docking station or:
Press and hold earphones operation/pairing button until the LEDs flash blue. the 0 4s The earphones switch on. To switch the earphones off:
Press and hold the operation/pairing button until the LEDs light up blue. 0 The earphones switch off. 4s 8 14 Book_XXXXXX_0308_Sp6.book Seite 15 Mittwoch, 6. Februar 2008 10:59 10 Note:
When you insert the earphones into the docking station, the earphones automatically switch off. If there is no transmitter in enrollment mode for at least 5 minutes, the earphones automatically switch off. Switching the transmitter on/off To switch the transmitter on:
Press and hold the transmitters operation/pairing button until the LED flashes blue. 0 4s The tranmitter switches on. To switch the transmitter off:
Press and hold the operation/pairing button until the LED lights up blue. 0 The transmitter switches off. 4s 8 Note:
The transmitter remains switched on during charging. To switch the transmitter off, press and hold the operation/
pairing button for 4 seconds. If there are no earphones in enrollment mode for at least 5 minutes, the transmitter automatically switches off. 15 Book_XXXXXX_0308_Sp6.book Seite 16 Mittwoch, 6. Februar 2008 10:59 10 Putting on the earphones CAUTION!
Danger of hearing damage!
Listening at high volume levels for long periods can lead to permanent hearing defects. Sennheiser earphones also sound exceptionally good at low volumes. Set the volume of the audio device to the minimum before switching the earphones on. Check the R (right) an L (left) marks on the earphones to identify them and put on the earphones as shown in the illustration above. 16 Book_XXXXXX_0308_Sp6.book Seite 17 Mittwoch, 6. Februar 2008 10:59 10 Care and maintenance Cleaning the devices CAUTION!
Liquids can damage the electronics of the devices!
Liquids entering the housing of the devices can cause a short-circuit and damage the electronics. Keep all liquids away from the devices. Do not use any cleansing agents or solvents. For reasons of hygiene, clean your Sennheiser products regularly. Before cleaning, disconnect the devices from the mains. Only use a slightly damp cloth to clean the devices. Changing the twist-to-fit pads/earpads/rubber rings For reasons of hygiene, the twist-to-fit pads, earpads and rubber rings should be replaced from time to time. Please order these spare parts from your Sennheiser dealer. Carefully remove the twist-to-fit pads / rubber rings /
earpads from the earphones. Mount the new twist-to-fit pads /rubber rings to the earphones. Pull the earpads speakers. over the 17 Book_XXXXXX_0308_Sp6.book Seite 18 Mittwoch, 6. Februar 2008 10:59 10 CAUTION!
Replacing the earphones rechargeable batteries Danger of damage to the devices!
Rechargeable other manufacturers may cause damage to the earphones and will invalidate the warranty. Only use original Sennheiser rechargeable button from cells button cells (see page 22). Slightly lift the end of the caps and slide the caps out of the guide rails. Insert the new rechargeable batteries as shown. Observe correct polarity when inserting the batteries. Replace the caps and slide them onto the guide rails until Charge the earphones until the corresponding LEDs go off it clicks audibly.
(see page 8). 18 Book_XXXXXX_0308_Sp6.book Seite 19 Mittwoch, 6. Februar 2008 10:59 10 Get the most out of your Sennheiser MX W1!
technology. This Your Sennheiser MX W1 uses the latest digital wireless transmission technology offers high transmission quality and reliability but, like other wireless technologies, can also be influenced by various factors such as:
objects or walls, as these can reflect (amplify) or attenuate the transmitted signal. the position of the transmitter on your body: optimally, the distance to both earphones should be the same. other wireless devices operating on similar frequencies
(around 2.4 GHz) within your immediate vicinity. In order to optimise the transmission quality of your MX W1, please make sure to:
attach the transmitter at the centre of your chest or back, observe a minimum distance of 5 mm between your body and the transmitter, place the audio device between the transmitter and your body. 19 Book_XXXXXX_0308_Sp6.book Seite 20 Mittwoch, 6. Februar 2008 10:59 10 Troubleshooting Possible cause Battery is flat Jack plug connection is incorrect Transmitter or earphones are switched off Audio device is switched off Volume of the audio device is adjusted too low Housing of player or something else blocks the transmission Transmission between the transmitter and earphones is disturbed by any interferences in the vicinity Device is out of range Signal is shielded Interfering devices in the vicinity Possible solution Recharge the battery
(see page 6, page 17) Check the connection to your audio device
(see page 12) Switch the device on
(see page 14) Switch the audio device on Adjust the volume to a higher level Remove obstacles between transmitter and earphones Briefly press the operation/pairing button of the transmitter Reduce the distance between earphones and transmitter Remove obstacles between transmitter and earphones Try relocation Problem No operation indication No sound Sound dropouts 20 Book_XXXXXX_0308_Sp6.book Seite 21 Mittwoch, 6. Februar 2008 10:59 10 Problem Humming noise Possible cause Interference when charging from the PC Only one earphone has audio Earphones cannot be switched on Transmitter was switched on before the earphones were switched on Rechargeable batteries have just been replaced Possible solution Charge from the power supply unit or choose a different audio source Briefly press the transmitters operation/pairing button Briefly charge the earphones
(see page 18) Resetting the transmitter to the factory settings In case of system malfunction:
Use a pointed tool to press the reset button for 1 second. The transmitter settings and then restarted. is reset to the factory If a problem occurs that is not listed in the above table or if the problem cannot be solved with the proposed solutions, please contact your local Sennheiser agent for assistance. 21 Book_XXXXXX_0308_Sp6.book Seite 22 Mittwoch, 6. Februar 2008 10:59 10 Accessories and spare parts The following accessories are available from your authorized Sennheiser dealer:
Cat. No. Accessory/Spare part 525766 525767 MX W1-C docking station 525768 MX W1-T transmitter 525769 Carrying case 525770 525773 525774 525775 Transmitter straps:
1 elastic fabric strap, 4 rubber bands (2 x S/2 x L) Lithium-ion rechargeable button cell (2 pieces) for the earphones , 40 mAh, 3.7 V DC Design plates: battery compartment covers for the earphones (1 pair) Earpads (5 pairs, foam) Accessory pack: Twist-to-fit pads
(4 pieces each of size) and 4 rubber rings 525776 MX W1 charging cable, power supply unit and country-adaptors 525777 MX W1-R earphone (left) 525778 MX W1-R earphone (right) 22 Book_XXXXXX_0308_Sp6.book Seite 23 Mittwoch, 6. Februar 2008 10:59 10 Specifications System Modulation Carrier frequencies Range Power supply unit with country adaptors Operating temperature Transmitter Audio connection Charging time of rechargeable battery Power supply Operating time Weight Dimensions Earphones Max. SPL THD Frequency response Charging time of rechargeable battery Power supply Rechargeable battery
(lithium-ion button cell) Operating time Weight Dimensions MSK Digital 2.4 2.48 GHz approx. 10 m in open area 100 240 V, 50/60 Hz, 5 V DC/0.5 A (x 2) 0 40 C 3.5 mm stereo jack socket approx. 2 hrs Input: 5 V DC/120 mA approx. 10 hrs approx. 16 g approx. 40 x 13 x 40 mm 115 dB (SPL)
<0.5 % at 1 kHz 100 dB SPL 19 Hz 20 kHz approx. 2 hrs Input: 5 V DC/30 mA 3.7 V, 40 mAh approx. 3 hrs approx. 10 g approx. 29 x 20.5 x 51 mm 23 Book_XXXXXX_0308_Sp6.book Seite 24 Mittwoch, 6. Februar 2008 10:59 10 Docking station Charging time of rechargeable battery Power supply Weight Dimensions approx. 2 hrs Input:
5 V DC/400 mA Output: 5 V DC/100 mA approx. 42 g approx. 71 x 26 x 74 mm kleer wireless technology The MX W1 is based on kleer digital wireless trans-
mission technology. Multiple (stereo) earphones capability Lossless sound transmission (CD quality) Smaller size of the devices Lower battery consumption The Kleer logo is a trademark of Kleer Inc. Manufacturer declarations Warranty 2 years Declaration of Conformity This equipment is in compliance with the essential requirements and other relevant provisions of Directives:
R&TTE directive (1999/5/EC) EMC Directive (2004/108/EC) Low Voltage Directive (2006/95/EC) RoHS Directive (2002/95/EC) WEEE Directive (2002/96/EC). The declaration is available on the internet site at www.sennheiser.com. Before putting the device into operation, please observe the respective country-specific regulations!
24 Book_XXXXXX_0308_Sp6.book Seite 25 Mittwoch, 6. Februar 2008 10:59 10 Statements regarding FCC and industry Canada FCC Declaration of Conformity (DoC) SENNHEISER Model No:MX W1 We, Sennheiser Electronic Corporation Strat. Marketing Stefanie Reichert One Enterprise Drive Old Lyme CT 06371 USA Tel: +1 (860) 434 9190, ext. 144 Fax: +1 (860) 434 1759 declare the above device comply with the requirements of Federal Communications Commission. This device complies with Part 15 of the FCC rules. Operation is subjected to the following two conditions:
1) This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that may cause undesired operation. Responsible Party: John Falcone This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This class B digital apparatus complies with the Canadian ICES-003. Changes or modifications made to this equipment not expressly approved by Sennheiser electronic Corp. may void the FCC authorization to operate this equipment. 25 Book_XXXXXX_0308_Sp6.book Seite 26 Mittwoch, 6. Februar 2008 10:59 10 Meet the requirements for:
USA:
FCC ID:
Canada:
IC:
DMOMXW1T DMOMXW1R 2099A-MXW1T 2099A-MXW1R Europe:
Australia &
New Zealand:
Singapore:
Complies with IDA Standards DB100582 Korea:
Taiwan:
Russia:
China:
Japan:
26 CMII ID : XXXXDJXXXX YYYYDJXXXX Book_XXXXXX_0308_Sp6.book Seite 1 Mittwoch, 6. Februar 2008 10:59 10 Sennheiser electronic GmbH & Co. KG Am Labor 1 30900 Wedemark, Germany Phone +49 (5130) 600 0 Fax +49 (5130) 600 300 www.sennheiser.com Printed in China 03/08