FCC ID: DMOF2EUVL Wireless Stereo Transmitter

W 300 IEM Instructions for use 39

. Thank you for choosing Sennheiser!

We have designed this product to give you reliable operation over many years. Over half a century of accumulated expertise in the design and manufacture of high-quality electro-acoustic equipment have made Sennheiser a world-leading company in this field. Please take a few moments to read these instructions carefully, as we want you to enjoy your new Sennheiser products quickly and to the fullest. 40 Contents The ew 300 IEM G2 system .................................................................................. 42 The channel bank system ............................................................................................. 42 Safety instructions ................................................................................................. 43 System components .............................................................................................. 43 Overview of operating controls ........................................................................... 44 SR 300 IEM G2 stereo transmitter ............................................................................... 44 EK 300 IEM G2 stereo receiver ..................................................................................... 45 Indications and displays on the transmitter ............................................................. 46 Indications and displays on the receiver ................................................................... 46 Preparing the components for use ..................................................................... 48 SR 300 IEM G2 stereo transmitter ............................................................................... 48 EK 300 IEM G2 stereo receiver ..................................................................................... 51 Using the components .......................................................................................... 52 Switching the components on/off .............................................................................. 52 Adjusting the volume .................................................................................................... 52 Adjusting the balance .................................................................................................... 53 Activating/deactivating the lock mode ..................................................................... 53 Attaching the receiver to clothing .............................................................................. 53 The operating menu ............................................................................................... 54 The buttons ..................................................................................................................... 54 Overview of menus ......................................................................................................... 55 Working with the operating menu ............................................................................. 55 Operating menu of the stereo transmitter ................................................................ 57 Operating menu of the stereo receiver ...................................................................... 59 Adjustment tips for the operating menu .......................................................... 62 Switching between channel banks ............................................................................. 62 Switching between the channels in a channel bank ............................................... 62 Selecting the frequencies to be stored in the channel bank U .......................... 62 Scanning the channel banks for free channels (receiver only) ............................. 62 Multi-channel operation ................................................................................................ 63 Adjusting the squelch threshold (receiver only) ...................................................... 63 Stereo/FOCUS selection (receiver only) ..................................................................... 64 Limiting the volume at the headphone output (receiver only) ............................ 64 Activating/deactivating the frequency boost (receiver only) .............................. 64 Adjusting the sensitivity (transmitter only) ............................................................ 64 Selecting the standard display .................................................................................... 65 Entering a name .............................................................................................................. 65 Loading the factory-preset default settings ............................................................. 66 Activating/deactivating the pilot tone evaluation (receiver only) ...................... 66 Adjusting the contrast of the graphic display (transmitter only) ....................... 66 Stereo/Mono selection (transmitter only) ................................................................ 66 Activating/deactivating the lock mode ..................................................................... 67 Exiting the operating menu .......................................................................................... 67 Troubleshooting ...................................................................................................... 68 Error checklist .............................................................................................. 68 Recommendations and tips .......................................................................................... 69 Care and maintenance ........................................................................................... 69 Additional information .......................................................................................... 70 HDX noise reduction ..................................................................................... 70 Wireless transmission systems ................................................................................... 70 Squelch ............................................................................................................................. 71 Specifications .......................................................................................................... 72 Connector assignment ................................................................................................... 73 Accessories .............................................................................................................. 74 41 The ew 300 IEM G2 system With the Sennheiser evolution wireless in-ear monitoring system ew 300 IEM G2

(suitable for both stage and broadcast use), musicians, video and sound amateurs, reporters/broadcasters, etc. can directly monitor the received sound signals without troublesome cables or monitor speakers being required. In addition, the system can also be used for any application where talkback signals are to be transmitted. The evolution wireless in-ear monitoring system ew 300 IEM G2 is a high-

quality state-of-the-art RF transmission systems with a high level of operational reliability and ease of use. Transmitter and receiver permit wireless transmission with studio-quality sound. The excellent transmission reliability of the ew 300 IEM G2 system is based on the use of

further optimized PLL synthesizer and microprocessor technology,

the HDX noise reduction system,

the pilot tone squelch control (during stereo operation),

and the scan function for scanning the channel banks for free channels. The channel bank system The ew 300 IEM G2 system is available in five UHF frequency ranges with 1440 transmission/receiving frequencies per frequency range. Please note:

Frequency usage is different for each country. Your Sennheiser agent will have all the necessary details on the available legal frequencies for your area. Range A:

Range B:

Range C:

Range D:

Range E:

518 to 554 MHz 626 to 662 MHz 740 to 776 MHz 786 to 822 MHz 830 to 866 MHz Transmitter and receiver have nine channel banks with up to 12 switchable channels each. The channel banks 1 to 8 have switchable channels that are factory-

preset to a transmission/receiving frequency (see enclosed frequency table). These transmission/receiving frequencies cannot be changed but have been preset so that e.g. country-specific regulations on frequency usage are taken into account. The channel bank U (user bank) has up to 12 switchable 42 channels to store your selection out of 1440 transmission/receiving frequencies that are freely selectable within the preset frequency range. An advantage of the factory-preset frequencies is that

the system is ready for immediate use after switch-on,

several in-ear monitoring systems can be operated simultaneously on the preset channels without causing intermodulation interference. Safety instructions Never open electronic units! If units are opened by customers in breach of this instruction, the warranty becomes null and void. Keep the units away from central heating radiators and electric heaters. Never expose them to direct sunlight. Use the units in dry rooms only. Use a damp cloth for cleaning the units. Do not use any cleansing agents or solvents. Attention! High Volume!

This is a professional transmission system. Commercial use is subject to the rules and regulations of the trade association responsible. Sennheiser, as the manufacturer, is therefore obliged to expressly point out possible health risks arising from use. This system is capable of producing sound pressure exceeding 85 dB(A). 85 dB(A) is the sound pressure corresponding to the maximum permissible volume which is by law (in some countries) allowed to affect your hearing for the duration of a working day. It is used as a basis according to the specifications of industrial medicine. Higher volumes or longer durations can damage your hearing. At higher volumes, the duration must be shortened in order to prevent damage. The following are sure signs that you have been subjected to excessive noise for too long a time:

You can hear ringing or whistling sounds in your ears.

You have the impression (even for a short time only) that you can no longer hear high notes. System components The system consists of:

1 EK 300 IEM G2 stereo receiver

1 SR 300 IEM G2 stereo transmitter

2 batteries

1 telescopic antenna for SR 300 IEM G2

1 NT 2-1 mains unit

IE 3 in-ear headphones

Instructions for use 43 Overview of operating controls SR 300 IEM G2 stereo transmitter

Operating controls Graphic display panel

Headphone output (PHONES),

(6.3 mm) jack socket

Headphone volume control (VOL)

Graphic display, backlit

/ rocker button, backlit

SET button, backlit

ON button, backlit

(serves as the ESC (cancel) key in the operating menu)

Cable grip for power supply DC cable

DC socket for connection of mains unit (DC IN)

Audio input (AF IN BAL/UNBAL), XLR-3F socket (left and MONO)

Audio input (AF IN BAL/UNBAL), XLR-3F socket (right)

Service interface (DATA)

Type plate

Antenna output (ANT), BNC socket

Display for the current channel bank 1...8, U

Display for the current channel number 1...12

B.CH abbreviation for channel bank and channel number

Alphanumeric display

MHz appears when the frequency is displayed

Level display for audio signal AF I (left and MONO), with PEAK warning

Level display for audio signal AF II (right), with PEAK warning

Lock mode icon

(lock mode is activated) Note:

For further illustrations and examples of the different standard displays, please refer to the section Selecting the standard display on page 65. 44 EK 300 IEM G2 stereo receiver

Operating controls LC display panel

Headphone output (PHONES), 3.5 mm jack socket

Antenna

Red LED for operation and battery status indication (ON/LOW BAT)

Green LED for RF signal indication (RF)

SET button

/ rocker button (DOWN/UP)

Battery compartment

Battery compartment cover

Unlocking button

ESC button

LC display

On/off/volume control

Alphanumeric display

B.CH appears when the channel bank and the channel number are displayed

MHz appears when the frequency is displayed

4-step battery status display

Lock mode icon

(lock mode is activated)

PILOT display

(pilot tone evaluation is activated)

MUTE display

(audio output is muted)

7-step level display for received audio signal AF

7-step level display for received RF signal RF 45 Indications and displays on the transmitter Modulation display The level display for audio signal AF shows the modulation of the transmitter. When the transmitters audio input level is excessively high, the level display for audio signal AF shows full deflection. When the transmitter is overmodulated frequently or for an extended period of time, the text PEAK (backlit in red) flashes in alternation with the standard display. Button backlighting During standby operation, the ON button is backlit in red. When the transmitter is switched on, the SET button and the / button are additionally backlit in green.

Indications and displays on the receiver Operation and battery status indication The red LED (LOW BAT/ON) provides information on the current operating state of the receiver:

Red LED lit up:

The receiver is switched on and the capacity of the batteries/accupack BA 2015 is sufficient.

Red LED flashing:

The batteries are/the accupack BA 2015 is going flat

(LOW BAT)!

In addition, the 4-step battery status display on the display panel provides information on the remaining battery/accupack BA 2015 capacity:

3 segments:

2 segments:

1 segment:

Battery icon flashing:

capacity approx. 100 %

capacity approx. 70 %

capacity approx. 30 %

LOW BAT

Modulation display of the receiving transmitter The level display for audio signal AF shows the modulation of the transmitter. When the transmitters audio input level is excessively high (AF peak), the receivers level display for audio signal AF shows full deflection. 46 MUTE display The MUTE display appears on the display panel when the RF signal of the received transmitter is too weak.

PILOT display The PILOT display appears on the display panel when the pilot tone evaluation is activated (see Activating/deactivating the pilot tone evaluation (receiver only) on page 66). RF signal indication The green LED (RF) at the front of the receiver lights up when an RF signal is being received. However, the green LED (RF) does not light up when the audio output is muted because

the RF signal of the received transmitter is too weak,

the transmitter is set to mono operation and the receivers pilot tone evaluation is activated. Display backlighting After pressing a button, the display remains backlit for approx. 15 seconds. 47 Preparing the components for use SR 300 IEM G2 stereo transmitter Mounting the transmitter feet To ensure that the transmitter cannot slip on the surface on which it is placed, four self-adhesive soft rubber feet are supplied.

Ensure that the base of the transmitter is clean and free from grease before mounting the rubber feet.

Fix the rubber feet to the base of the transmitter by peeling of the safety paper and fitting them as shown in the digram on the left. Attention!

Some furniture surfaces have been treated with varnish, polish or synthetics which might cause stains when they come into contact with other synthetics. Despite a thorough testing of the synthetics used by us, we cannot rule out the possibility of staining. Connecting the antenna The supplied telescopic antenna can be mounted quickly and easily to the rear of the transmitter and is suitable for all applications where good transmission conditions provided a wireless transmission system is to be used without a large amount of installation work.

Connect the telescopic antenna to the BNC socket at the rear of the transmitter.

Pull the end cap to extend the telescopic antenna .

Use a remote antenna (available as an accessory) when the transmitter position is not the best antenna position for optimum transmission. Connecting the mains unit The transmitter is powered via a mains unit.

Pass the cable through the cable grip .

Insert the DC connector on the mains cable into the DC socket . Connecting the amplifier/mixing console

Connect the amplifier/mixing console to the XLR-3F sockets (left and MONO) or (right). Both balanced and unbalanced connection is possible (see Connector assignment on page 73).

Note:

Any unit that is only suitable for mono operation must be connected to XLR-3F socket . In this case, set the transmitter to mono operation via the menu.

48

Via the Sensitiv menu, adjust the transmitters input sensitivity (see Adjusting the sensitivity (transmitter only) on page 64). Connecting the headphones/monitoring the audio signal To monitor the audio signal, connect headphones with a (6.3 mm) jack plug to the headphone output (PHONES) . Neue Abbildung Attention! High volume!

Even short exposure to high volume levels will damage your hearing!

Set the volume for the connected headphones to the minimum before putting the headphones on.

First, set the volume control ! to the lowest volume by turning it to the left as far as possible. Then gradually turn up the volume. Volume up? NO!

When people use headphones, they tend to choose a higher volume than with loudspeakers. Listening at high volume levels for long periods can lead to permanent hearing defects. Please protect your hearing, Sennheiser headphones have an excellent sound quality even at low volumes. Service interface The service interface is only required for servicing purposes.

19 rack adapter and antenna mount For mounting one or two transmitters into a 19 rack, you require the GA 2 rack adapter (available as an accessory). The GA 2 rack adapter consists of:

2 rack mount ears "

1 connecting bar #

1 connecting plate $

2 covering plugs % for antenna holes

12 recessed head screws M 3x6

2 recessed head screws M 6x10 When mounting only one transmitter into a rack, you can use the AM 2 antenna mount (available as an accessory) to mount the transmitters antenna connection to the front of the GA 2 rack adapter. The AM 2 antenna mount consists of:

2 BNC extension cables (screw-in BNC socket & to BNC connector )

2 plains washers

2 nuts

49

To mount two transmitters into a rack:

Place the two transmitters side by side onto a flat surface, their bottom sides facing upwards.

Align the connecting plate $ over the holes in the

bottom sides of the transmitters.

Secure the connecting plate $ using eight of the supplied recessed head screws (M 3x6).

Hook the two rack mount ears " to the front panels of the transmitters.

Secure the rack mount ears to the transmitters using two of the supplied recessed head screws

(M 3x6) respectively.

Slide the transmitters into the 19 rack.

Secure the rack mount ears to the rack. When mounting only one transmitter into a rack, use the connecting bar # instead of the second transmitter.

Hook the two rack mount ears " to the front panels of the transmitter.

Secure the rack mount ears to the transmitter using two of the supplied recessed head screws (M 3x6) respectively.

Secure the connecting bar # to one of the rack mount ears " using two of the supplied recessed head screws (M 6x10).

If you are not front mounting the antennas, insert the two covering plugs % into the antenna holes of the connecting bar.

Slide the transmitter into the 19 rack.

Secure the rack mount ears to the rack. To mount the transmitters antenna connection to the front of the GA 2 rack adapter using the AM 2 antenna mount:

Screw the BNC socket & of the BNC extension cables to the connecting bar # using the supplied plain washer and nut.

Connect the BNC connector to the BNC socket at the rear of the transmitter.

Slide the transmitter into the 19 rack.

Secure the rack mount ears to the rack.

Connect the telescopic antenna to the BNC socket &.

Pull the end cap to extend the telescopic antenna.

50 EK 300 IEM G2 stereo receiver Inserting and replacing the batteries

For powering the EK 300 IEM G2 receiver, two 1.5 V AA size batteries are required.

Press the two unlocking buttons and open the battery compartment cover .

Insert the two batteries as shown in the diagram on the left. Please observe correct polarity when inserting the batteries.

Close the battery compartment. The battery compartment cover locks into place with an audible click. Inserting and charging the accupack The receiver can also be powered via the rechargeable Sennheiser BA 2015 accupack. Insert the accupack into the battery compartment as described above. The transmitter has two charging contacts and a sensing contact on its short sides. The accupack can be recharged while remaining in the transmitter. Insert the transmitter into the L 2015 charger (see operating manual of the L 2015 charger). Note:

For accupack operation of the receiver, only use the BA 2015 accupack In order to ensure optimum operational reliability. For charging the accupack, only use the L 2015 charger. Both the accupack and the charger are available as accessories. The accupack is fitted with an integrated sensor which is via a third contact monitored by the electronics of the receiver and the charger. The sensor is necessary for the following control purposes:

The taking into account of the different voltage characteristics of pri-

mary cells (batteries) and accupacks. The battery status indications on the displays, the transmission of transmitter battery status information to the rack-mount receivers and the switch-off thresholds at the end of the operating time are corrected correspondingly. Due to the missing sensor, individual rechargeable battery cells will not be identified as accupacks.

The monitoring of the accupack temperature during charging in the L 2015 charger.

The prevention of improper charging of inserted primary cells (batte-

ries). Due to the missing sensor, individual rechargeable battery cells will also not be charged in the L 2015 charger. Connecting the headphones

If you use the receiver as part of the monitoring system, connect the supplied in-ear headphones or any Sennheiser stereo headphones with 3.5 mm stereo jack plug to the headphone output (PHONES) . Attention! High volume!

Even short exposure to high volume levels will damage your hearing!

Set the volume for the connected headphones to the minimum before putting the headphones on.

First, set the volume control ! to the lowest volume by turning it to the left as far as possible. Then gradually turn up the volume. Volume up? NO!

When people use headphones, they tend to choose a higher volume than with loudspeakers. Listening at high volume levels for long periods can lead to permanent hearing defects. Please protect your hearing, Sennheiser headphones have an excellent sound quality even at low volumes. 51

Using the components Switching the components on/off Switching the transmitter on/off

Press the ON button to switch the transmitter on.

To switch the transmitter off, press the ON button until OFF appears on the display. Note:

The transmitter can only be switched off when the standard display is shown on the display panel. Within the operating menu, the ON button serves as the ESC (cancel) key, i.e you cancel your entry and return to the standard display.

Switching the receiver on/off

To switch the receiver on, turn the volume control clockwise until it clicks. The red LED lights up.

To switch the receiver off, turn the volume control counterclockwise until it clicks. The red LED goes off.

Note:

The receiver has a short switch-on delay.

Remove the batteries or the accupack when the receiver will not be used for extended periods of time. Adjusting the volume You can adjust the volume at the headphone output on both the transmitter and the receiver.

Use the volume control ! or to adjust the volume of the connected headphones. Volume up? NO!

When people use headphones, they tend to choose a higher volume than with loudspeakers. Listening at high volume levels for long periods can lead to permanent hearing defects. Please protect your hearing, Sennheiser headphones have an excellent sound quality even at low volumes. 52 Adjusting the balance During stereo operation and provided that the standard display is shown on the display panel the / rocker button serves to adjust the balance between the left and right stereo signal. During FOCUS operation, the / rocker button serves to adjust the relative levels of the two separate channels in the mixed mono signal (see Stereo/FOCUS selection (receiver only) on page 64).

Activating/deactivating the lock mode Transmitter and receiver have a lock mode that can be activated or deactivated via the operating menu (see Activating/deactivating the lock mode on page 67). The lock mode prevents that

the transmitter is accidentally programmed or switched off during

the balance setting is accidentally changed via the receivers / rocker operation button. Attaching the receiver to clothing The receiver is attached to clothing (e.g. belt, waistband) with the supplied belt clip. SR 300 IEM G2 EK 300 IEM G2 53 The operating menu To ensure intuitive operation of both transmitter and receiver, the operating menus have been largely standardized. As a result, adjustments to the settings can be made quickly and without looking even in stressful situations, for example on stage or during a live show or presentation. The buttons Buttons Mode To ... Standard display switch the transmitter on and off ON Operating menu

(transmitter only) cancel the entry and return to the standard display Setting mode cancel the entry and return to the standard display Standard display get into the operating menu SET Operating menu get into the setting mode of the selected menu Setting mode store the settings and return to the previous menu level Standard display without function (transmitter) adjust the balance (receiver)

/ Operating menu change to the previous menu

() or change to the next menu

() Setting mode adjust the setting of the selected menu:

option (/) Standard display without function ESC

(receiver only) Operating menu cancel the entry and return to the standard display Setting mode cancel the entry and return to the standard display 54 Overview of menus Transmitter Receiver Display Function of the menu Display Function of the menu Bank Switching between channel banks Switching between channel banks Channel Tune Switching between the channels in a channel bank Setting a receiving frequency for the channel bank U (user bank) Switching between the channels in a channel bank Setting a receiving frequency for the channel bank U (user bank) Scanning a channel bank for free channels SQELCH Adjusting the squelch threshold ST-FOC Stereo/FOCUS selection Sensitiv Adjusting the sensitivity Display Selecting the standard display DISPLY Selecting the standard display BANK CHAN TUNE SCAN LTD Hi-BST NAME RESET PILOT Limiting the volume at the headphone output Activating/deactivating the frequency boost Entering a name Loading the factory-preset default settings Activating/deactivating the pilot tone evaluation Entering a name Loading the factory-preset default settings LCD Contr Adjusting the contrast of the graphic display Mode Stereo/Mono selection Name Reset Lock Exit SR 300 IEM G2 EK 300 IEM G2 Activating/deactivating the lock mode LOCK Activating/deactivating the lock mode Exiting the operating menu and returning to the standard display EXIT Exiting the operating menu and returning to the standard display Working with the operating menu By way of example of the Tune menu, this section describes how to use the operating menu. After switching the unit on, the standard display is shown on the display panel. 55 Getting into the operating menu

Press the SET button to get from the standard display into the operating menu. The last menu selected flashes on the display. With the transmitter, the current setting is additionally displayed. Selecting a menu

Press the / buttons to select a menu.

Press the SET button to get into the setting mode of the selected menu. With the receiver, the current setting that can be adjusted flashes on the display. With the transmitter, the name of the menu and the current setting are displayed. Adjusting a setting

Press the / buttons to adjust the setting. By briefly pressing the / buttons, the display jumps either forwards or backwards to the next setting. In the Channel, Tune and Name menu, the / buttons feature a fast search function. If you hold down a button, the display cycles continuously. The fast search function allows you to get fast and easily to your desired setting. With the receiver, the new setting flashes on the display until it is stored. Storing a setting

Press the SET button to store the setting. Stored appears on the display, indicating that the setting has been stored. The display then returns to the top menu level. With most menus, new settings become effective immediately without having to be stored. An exception are the Bank, Channel, Tune and Reset menus of the transmitter and the RESET menu of the receiver. With these menus, new settings only become effective after they have been stored (Stored appears on the display, indicating that the setting has been stored). Exiting the operating menu

Select the Exit menu to exit the operating menu and to return to the standard display. When you have entered the operating menu, the transmitters ON button serves as the ESC (cancel) key, i.e. by briefly pressing this button, you cancel your entry and return to the standard display. The receiver has a separate ESC button with which you can cancel your entry. 56 Operating menu of the stereo transmitter SET Exit Menu Exit Bank 1 Channel 01 Changing the channel bank SET Bank 1.01 B.CH Current channel bank 786.300 MHz Bank 3.01 B.CH

/ : 1...8, U (User Bank) 790.250 MHz SET: Stores the setting Menu Bank 3 Channel 01 Tune 786.400MHz Changing the channel SET Channel 3.01 B.CH Current channel and corresponding frequency 790.250 MHz Channel 3.08 B.CH

/ : Channel 01...12 807.900 MHz SET: Stores the setting Menu Channel 08 Tune 807.900MHz Sensitiv 24 dB Setting the frequency for channel bank "U"

SET Tune U.01 B.CH Current frequency on the selected channel 786.300 MHz Tune U.01 B.CH

/ : Transmission frequency in steps of 25 kHz 797.075 MHz SET: Stores the setting Menu Tune 797.075MHz Sensitiv 24 dB Display Frequency Setting the sensitivity SET Sensitiv 24 dB Sensitiv 8 dB Current sensitivity setting

/ : 0...24 dB, Sensitivity in steps of 8 dB SET: Stores the setting Menu Sensitiv 8 dB Display Frequency Name VOCAL Switching between the standard displays SET Display Frequency Current standard display Display Name

/ : Frequency, Bank/Channel, Name SET: Stores the setting Stored Stored Stored Stored Stored Frequency Bank/Channel Name Menu Display Name Name VOCAL Reset Assigning the transmitter a name SET Name OCAL Current transmitter name Stored Reset Name CAL G

/ : Name (10 characters) Letters w/o pronounciation marks, numbers from 0...9, special characters, spaces SET: 9 x next character, then store 57 Reset Reset? Yes

/ : No, Yes

"reset"= Yes:

SET: Transmitter loads factory-

preset default settings, transmitter is restarted, standard display appears

"reset"= No:

SET: Reset is cancelled LCD Contrast IIIIIIIIII......

/ : 16 steps SET: Stores the setting Mode Mono

/ : Stereo, Mono SET: Stores the setting Lock On

/ : On, Off Lock mode = On:

SET: Stores the setting, returns to standard display Lock mode = Off:

SET: Stores the setting Name GUITAR Menu Name GUITAR Reset LCD Contr IIIIII..... Loading the factory-preset default settings SET Reset Reset? No Security check Menu Reset LCD Contr IIIIII..... Mode Stereo Adjusting the contrast of the graphic display SET LCD Contrast IIIIII.......... Current contrast setting Menu LCD Contr IIIIIIIIII...... Mode Stereo Lock Off Switching between stereo and mono operation SET Mode Stereo Current setting Menu Mode Mono Lock Off Exit Activating the lock mode SET Lock Off Lock mode activated or deactivated STORED STORED STORED SET Menu Lock On Exit Bank 3 Exiting the operating menu Bank 3 58 Operating menu of the stereo receiver EXIT SET SET BANK Changing the channel bank BANK 1 Current channel bank CHAN Changing the channel SET STORED 1.01 B.CH Current channel or frequency STORED TUNE Setting the frequency for channel bank "U"

SET 790.025 790.025 MHz Current frequency on the selected channel SCAN Scanning the selected channel bank for free channels STORED SET U. START 09 CH FREE SET STORED SQELCH Setting the squelch threshold SET SQ LOLO Current squelch threshold STORED ST--FOC BANK U

/ : 1...8, U (User Bank) SET: Stores the setting 1.12 B.CH

/ : Channel 01...12 SET: Stores the setting 791.125 791.125 MHz

/ : Receiving frequency in steps of 25 kHz SET: Stores the setting U. CLEAR

/ : CLEAR, START Start scan = START SET: Scans the selected channel bank for free channels Delete result = CLEAR SET: Releases locked channels SQ HIHI

/ : LO, MID, HI SET: Stores the setting 59 HI--BST Boosting the AF frequency response HB.OFFOFF Frequency boost activated or deactivated HB. ONON

/ : OFF, ON SET: Stores the setting SQELCH ST--FOC Switching between stereo and FOCUS operation LTD Limiting the volume at the headphone output SET STEREO Current setting STORED LTD.OFFOFF Limiter activated or deactivated STORED SET SET DISPLY Switching between the standard displays SET CHANCHAN Current standard display NAME Assigning the receiver a name SET VOCAL Current receiver name STORED STORED STORED RESET FOCUS

/ : Stereo, Focus SET: Stores the setting LTD. ONON

/ : OFF, ON SET: Stores the setting NAME NAME

/ : FREQ, NAME, CHAN SET: Stores the setting GUCAL

/ : Enter a name (6 characters) Letters w/o pronounciation marks, numbers from 0...9, special characters, spaces SET: 5 x next character, then store 60 NAME RESET Loading the factory-

preset default settings SET RST. NONO Security check SET PLT. ONON PILOT Activating/deactivating the pilot tone transmission Pilot tone transmission activated or deactivated STORED LOCK Activating the lock mode SET LOC.OFFOFF Lock mode activated or deactivated STORED EXIT Exiting the operation SET BANK RST. OKOK

/ : OK, NO

"reset" = OK:

SET: Receiver loads factory-

preset default settings (only pilot tone setting is kept), receiver is restarted, standard display appears

"reset" = NO SET: Reset is cancelled PLT. OFFOFF

/ : ON, OFF SET: Stores the setting LOC. ON ON

/ : ON, OFF Lock mode = ON:

SET: Stores the setting,

("STORED") returns to standard display Lock mode = OFF:

SET: Stores the setting BAL.L 1 Current balance setting BAL.R 1515

/ : BAL.L 1...15, BAL.--0--, BAL.R 1...15 Adjusting the balance 61 BANK Bank CHAN Channel TUNE Tune Adjustment tips for the operating menu Switching between channel banks Via the Bank menu, you can switch between the nine channel banks of the ew 300 IEM G2 transmitter and receiver. The channel banks 1 to 8 have up to 12 switchable channels that are factory-preset to a transmission/

receiving frequency (see The channel bank system on page 42). The channel bank U (user bank) also has up to 12 switchable channels to store your selection out of 1440 transmission/receiving frequencies that are freely selectable within the preset frequency range. When switching from one channel bank to another, the channel with the lowest channel number is automatically displayed. If, during the last scan of this channel bank, an interfering frequency was detected on the channel with the lowest channel number, the receiver display panel automatically displays the next free channel (see below). Switching between the channels in a channel bank Via the Channel menu, you can switch between the channels in a channel bank. Always set the transmitter and the receiver of a transmission link to the same channel. After scanning a channel bank (see Scanning the channel banks for free channels (receiver only) on page 62), only the free channels are displayed. Set the transmitter to one of the free channels Selecting the frequencies to be stored in the channel bank U Via the Tune menu, you can select the frequencies to be stored in the channel bank U (user bank). When you have selected one of the channel banks 1 to 8 and then select the Tune menu, the transmitter or receiver automatically switches to channel 01 of the channel bank U. In this case, U.01 briefly appears on the display.

Use the / buttons to select the desired transmission or receiving frequency. Transmission and receiving frequencies are tunable in 25-kHz steps within a switching bandwidth of 36 MHz max. For intermodulation-

free frequencies, please refer to the enclosed frequency table. Scanning the channel banks for free channels

(receiver only) SCAN Before putting one or several transmission links into operation, you should scan the selected channel bank for free channels. 62 Starting the scan and storing the scan result

Before starting the scan, switch all transmitters of your system off, since channels used by switched-on transmitters will not be displayed as free channels.

Select the SCAN menu.

Select START and confirm your selection by pressing the SET button. After the scan is completed, the number of free channels is displayed. Pressing the SET button once more will store the scan result and lock all channels that are used or subject to interference. Releasing locked channels

Select the SCAN menu.

Select CLEAR and confirm your selection by pressing the SET button. All channels in this channel bank can now be selected again. Multi-channel operation For multi-channel operation, only use the free channels in a channel bank. Before putting the transmission links into operation, we recommend performing an auto scan.

Select a channel bank on a receiver.

Scan this channel bank for free channels. If not enough free channels are available in the selected channel bank, repeat the scan with another channel bank.

Apply the scan result to all other transmitters and receivers. Adjusting the squelch threshold (receiver only) SQELCH The receiver is equipped with a squelch that can be adjusted via the SQELCH menu. The squelch eliminates annoying noise when the transmitter is switched off. It also suppresses sudden noise when there is no longer sufficient transmitter power received by the receiver. Note:

Before adjusting the squelch threshold to a different setting, use the volume control to set the volume for the connected headphones to the minimum. There are three possible squelch settings:

= low

LO

MID = middle

HI

= high Selecting the setting LO reduces the squelch threshold, selecting the setting HI increases the squelch threshold. Adjust the squelch threshold with the transmitter switched off to the lowest possible setting that suppresses hissing noise. 63 IMPORTANT!

Notes:

If the squelch threshold is adjusted too high, the transmission range will be reduced. Therefore, always adjust the squelch threshold to the lowest possible setting. The squelch threshold is factory-preset to LO.

When in the setting mode of the SQELCH menu, pressing the

button for more than three seconds will switch the squelch off. SQ.OFF appears on the display. If no RF signal is being received, his-

sing noise will occur. This setting is for test purposes only. Stereo/FOCUS selection (receiver only) ST-FOC Via the ST-FOC menu, you can switch between stereo and FOCUS operation. In both operating modes, the SR 300 IEM G2 stereo transmitter has to be set to stereo operation. When the receiver is set to stereo operation, the left-right signals are available as usual. When the receiver is set to FOCUS operation, the left-right signals are mixed and are available as a mono signal in both headphone channels. Use the /

rocker button to adjust the relative levels of the two separate channels in the mixed mono signal (see Adjusting the balance on page 53). Limiting the volume at the headphone output (receiver only) LTD Via the LTD menu, you can switch the limiter on and off. With the limiter switched on, the volume at the headphone output will be reduced. Activating/deactivating the frequency boost (receiver only) HI-BST Via the HI-BST menu, you can boost the AF frequency response at 10 kHz. As a result, headphones with magnetic transducers sound better. Adjusting the sensitivity (transmitter only) To match the transmitter to the output level of the connected unit (e.g. mixing console), you can adjust the input sensitivity in four steps of 8 dB via the Sensitiv menu. The input sensitivity is adjusted too high when close talking distances, speakers with loud voices or loud music passages cause overmodulation in the transmission link. In this case, the transmitters PEAK warning will light up and the receivers level display for audio signal AF will show full deflection. If, on the other hand, the sensitivity is adjusted too low, the transmission link will be undermodulated, which would result in a signal with high background noise. The sensitivity is correctly adjusted when the level display for audio signal AF shows full deflection only during the loudest passages. Sensitiv 64 Selecting the standard display DISPLY Display Via the Display menu, you can select the standard display. SR 300 IEM G2 stereo transmitter Selectable standard display Contents of standard display Frequency

(display of the frequency) Bank/Channel

(display of the channel bank and channel number) Name

(display of the freely selectable name) FREQ NAME CHAN EK 300 IEM stereo receiver Selectable standard display Contents of standard display Entering a name NAME Name Via the Name menu, you can enter a freely selectable name for the transmitter and the receiver. You can, for example, enter the name of the performer for whom the adjustments have been made. The name can be displayed on the standard display and can consist of up to ten characters (transmitter) and up to six characters (receiver) such as:

letters (without pronounciation marks),

numbers from 0 to 9,

special characters e.g. () - . _ and spaces. To enter a name, proceed as follows:

Press the SET button to get into the setting mode of the Name menu. The first segment starts flashing on the display.

With the / buttons you can now select a character. By briefly pressing 65 a button, the display jumps either forwards or backwards to the next character. If you hold down a button, the display starts cycling continuously.

Press the SET button to change to the next segment and select the next character.

Have you entered the name completely? Press the SET button to store your setting and to return to the previous menu level. Loading the factory-preset default settings Via the Reset menu, you can load the factory-preset default settings. With the receiver, however, the selected setting for the pilot tone remains unchanged. After the reset, the unit is restarted and the standard display is shown on the display panel. Activating/deactivating the pilot tone evaluation

(receiver only) Via the Pilot menu, you can activate or deactivate the pilot tone evaluation of the receiver. The pilot tone is used

to code the transmitters stereo signal,

to support the squelch function (Squelch). During stereo operation, the transmitter adds the pilot tone to the transmitted stereo signal and the receiver detects and evaluates the pilot tone. When the transmitter is set to mono operation, deactivate the pilot tone evaluation on the receiver. You can combine units of first and second generation ew 300 IEM systems without any problems. RESET Reset PILOT Pilot Adjusting the contrast of the graphic display (transmitter only) LCD-Contr Via the LCD Contr menu, you can adjust the contrast of the graphic display in 16 steps. Stereo/Mono selection (transmitter only) Mode Via the Mode menu, you can switch the transmitter between mono and stereo operation. Note:

Connect any unit that only delivers a mono signal to the transmitters left XLR-3F socket and set the transmitter to mono operation. The receiver automatically identifies the transmitted audio signal and does not need to be set to mono operation. However, you have to deactivate the pilot tone evaluation on the receiver.

66 Activating/deactivating the lock mode Via the Lock menu, you can activate or deactiveate the lock mode. The lock mode icon on the display indicates that the lock mode is activated. To deactivate the lock mode, first press the SET button. Then press the / buttons to select Lock Off. If you confirm your selection by pressing the SET button, the buttons can be operated as usual. LOCK Lock SR 300 IEM G2 EK 300 IEM G2 Exiting the operating menu EXIT Exit Via the Exit menu, you can exit the operating menu and return to the standard display. 67 Troubleshooting Error checklist Problem Possible cause Possible solution No operation indication Batteries are flat or accupack is flat (receiver only) Replace the batteries or recharge the accupack No mains connection (transmitter only) Check the connections of the mains unit No RF signal Transmitter and receiver are not on the same channel Set transmitter and receiver to the same channel Transmitter is out of range Check the squelch threshold setting

(see Adjusting the squelch threshold

(receiver only) on page 63) or reduce the distance between transmitter and receiving antenna Deactivate the pilot tone evaluation on the receiver RF signal available, no audio signal, MUTE display appears on the display panel Transmitter is set to mono operation and the pilot tone evaluation of the receiver is activated Receivers squelch threshold is adjusted too high See Adjusting the squelch threshold

(receiver only) on page 63) Audio signal has a high level of background noise Transmitter sensitivity is adjusted too low See Adjusting the sensitivity

(transmitter only) on page 64 Audio signal is distorted Transmitter sensitivity is adjusted too high See Adjusting the sensitivity

(transmitter only) on page 64 No access to a certain channel During scanning, an RF signal has been detected on this channel and the channel has been locked See Scanning the channel banks for free channels (receiver only) on page 62 If problems occur that are not listed in the above table or if the problems cannot be solved with the proposed solutions, please contact your local Sennheiser agent for assistance. 68 Recommendations and tips

... for the EK 300 IEM G2 receiver

The antenna of the EK 300 IEM G2 should hang freely and be at least 1 cm away from the body. The antenna must not be in direct contact with the skin. .. for optimum reception

Transmission range depends to a large extent on location and can vary from about 10 m to about 150 m. There should be a free line of sight between transmitting and receiving antennas.

If, with the SR 300 IEM G2 transmitter, transmission conditions are unfavourable, you should use a remote antenna which is connected via antenna cable.

To avoid overmodulating the receiver, observe a minimum distance of 5 m between transmitting and receiving antennas.

Observe a minimum distance of 50 cm between transmitting antennas and metal objects (such as cross members or reinforced-concrete walls). .. for multi-channel operation

For multi-channel operation, you can only use the channels in a channel bank. Each of the channel banks 1 to 8 accommodates up to 12 factory-preset frequencies which are intermodulation-free. For alternative frequency combinations, please refer to the enclosed frequency table. The freely selectable frequencies can be selected via the Tune menu and can be stored in the channel bank U.

When using several transmitters simultaneously, interference can be avoided by maintaining a minimum distance of 20 cm between two transmitters. For multi-channel applications, use the AC 2 transmitter combiner (see Accessories on page 73). Care and maintenance Use a slightly damp cloth to clean the units from time to time. Note:

Do not use any cleansing agents or solvents. 69 Additional information HDX noise reduction RF link Inherent noise of the RF link Transmitter Receiver The evolution wireless G2 series is equipped with HDX, the Sennheiser noise reduction system that reduces RF interference. It increases the signal-to-

noise ratio in wireless audio transmission to more than 110 dB. HDX is a wideband compander system which compresses the audio signal in the transmitter in a 2:1 ratio (related to dB) to lift it above the inherent noise floor of the RF link. In the receiver the signal is expanded in an identical and opposite way in a 1:2 ratio to restore the original signal, at the same time reducing the RF noise to below the noise floor of the receiver. HDX has been specially developed for high quality radiomicrophone systems. Note:

Only transmitters and receivers that are equipped with HDX can work correctly with each other. If non HDX equipment was mixed with HDX, the dynamic range would be drastically reduced and the transmission would sound blunt and flat. HDX is permanently active and cannot be switched off. Wireless transmission systems With the ew 300 IEM G2 system, Sennheiser puts an end to cable tangles and enables complete freedom of movement. The systems operate exclusively in the UHF band. UHF transmission is extremely reliable and is far less prone to interference than the overcrowded VHF band harmonics from mains units, fluorescent tubes, refrigerators, computers, etc. are virtually eliminated. Also indoor propagation of UHF radio waves is better than VHF so that the RF power can be kept low this is also an advantage when using multi-channel systems. Finally, UHF frequency ranges are being approved all over the world for radiomicrophone usage in some countries licence-free. Correct adjustment of transmitter sensitivity is vital. Too high and you get overmodulation and distortion, too low and you get undermodulation and a noisy signal. Please set the sensitivity correctly for the microphone/usage and check it before every performance to ensure best operation. 70 Squelch Pilot tone squelch When the transmitter is set to stereo operation, it adds a 19-kHz pilot tone to the audio signal. The receiver checks incoming audio signals to see if the pilot tone is present. In the absence of the 19-kHz signal, the receivers audio output will remain muted, even if a strong RF signal is present. This prevents strong interfering signals from causing hissing noise in the receiver when the transmitter is switched off. Field strength-dependent squelch Depending on the strength of the received RF signal, the receivers audio output is opened or muted. Via the SQELCH menu of the receiver, the squelch threshold can be adjusted in three steps (LO, MID, HI). 71 Specifications System RF characteristics Modulation Frequency ranges Transmission/receiving frequencies Switching bandwidth Nominal/peak deviation Frequency stability AF characteristics Noise reduction system AF frequency response MPX pilot tone (Frequenz/Hub) S/N ratio (at 1 mV and peak deviation) THD (at nominal deviation and 1 kHz) General data Temperature range Dimensions of carrying case [mm]

Weight of carrying case IE 3 in-ear headphones Frequency response Max. SPL Impedance EK 300 IEM G2 stereo receiver RF characteristics Receiver principle Sensitivity (with HDX, peak deviation) Adjacent channel rejection Intermodulation attenuation Blocking Squelch wideband FM stereo, MPX pilot tone 518554, 626662, 740776, 786822, 830866 MHz 8 channel banks with up to 12 factory-preset channels each 1 channel bank with up to 12 freely selectable channels

(1440 frequencies, tunable in steps of 25 kHz) 36 MHz 24 kHz/48 kHz 15 ppm Sennheiser HDX 4015,000 Hz 19 KHz/4 kHz 91 dB(A) 0.9 %

10 C to +55 C 380 x 370 x 70 approx. 3000 g 4020,000 Hz 118 dB SPL 32 non diversity

< 2.5 V at 52 dBArms S/N ratio 70 dB 70 dB 80 dB 4 steps:

OFF LO:

5 dBV MID: 15 dBV HI: 25 dBV Pilot tone squelch (MPX pilot tone) can be switched off AF characteristics Headphone output AF output voltage (at peak deviation 1 kHzAF) PHONES 2 x 100 mW at 32 3.5 mm jack socket Overall device Power supply Nominal voltage Max. power consumption at nominal voltage Power consumption with switched-off receiver Operating time (with batteries) Operating time (with BA 2015 accupack) Dimensions [mm]

Weight (incl. batteries) 72 2 AA size batteries, 1.5 V 2.4 V approx. 190 mA (2 x 30 mW) 250 A 610 h (depending on volume level) 610 h (depending on volume level) 82 x 64 x 24 approx. 170 g SR 300 IEM G2 stereo transmitter RF characteristics RF output power at 50 Antenna output AF characteristics Headphone output Output power at headphone output AF input Max. input voltage (at peak deviation, 1 kHz) Input impedance Overall device Power supply Nominal voltage Max. power consumption at nominal voltage Dimensions [mm]

Weight Connector assignment 20 mW, internally adjustable to 10 mW BNC socket, 50

(6.3 mm) stereo jack socket 100 mW at 32 (2x) 2 x XLR-3 socket, balanced

+10dBu 10 k 10.516 V DC 12 V DC approx. 300 mA 212 x 145 x 38 approx. 1100 g SR 300 IEM G2:

(6.3 mm) stereo jack plug for headphone output SR 300 IEM G2:

XLR-3M connector SR 300 IEM G2:

DC connector for power supply EK 300 IEM G2:

3.5 mm stereo jack plug for headphone output

2 1 3 Accessories GA 2 19 rack adapter AM 2 Antenna mount for mounting antennas to the front of the GA 2 A 1031-U UHF antenna, A 2003-UHF UHF antenna, passive, omni-directional, can be mounted onto a stand passive, directional, can be mounted onto a stand GZL 1019-A1 Antenna cable with BNC connectors GZL 1019-A5 Antenna cable with BNC connectors 1 m 5 m AC 2 Transmitter combiner, for combining the RF signals of up to four transmitters onto a single antenna and for powering up to four transmitters NT 3 Plug-in mains unit for AC 2 IE 3 In-ear headphones IES 3 1 pair of ear-moulds BA 2015 Accupack L 2015 Charger for BA 2015 accupack CC 2 Carrying case for ew 300 IEM G2 system 73 74