| all | frequencies |
|
|
|
|
exhibits | applications |
|---|---|---|---|---|---|---|---|
| manual | photos | label | |||||
| app s | submitted / available | |||||||
|---|---|---|---|---|---|---|---|---|
| 1 |
|
User Manual | Users Manual | 761.17 KiB | September 08 2019 | |||
| 1 |
|
Internal photos | Internal Photos | 872.63 KiB | September 08 2019 | |||
| 1 |
|
External photos | External Photos | 1.12 MiB | September 08 2019 | |||
| 1 |
|
Sample label of a final product | ID Label/Location Info | 157.11 KiB | September 08 2019 | |||
| 1 |
|
Cover letter | Cover Letter(s) | 39.42 KiB | September 08 2019 | |||
| 1 |
|
Request for confidentiality | Cover Letter(s) | 48.17 KiB | September 08 2019 | |||
| 1 |
|
Test report | Test Report | 3.56 MiB | September 08 2019 | |||
| 1 |
|
Test setup photos | Test Setup Photos | 1.09 MiB | September 08 2019 |
| 1 | User Manual | Users Manual | 761.17 KiB | September 08 2019 |
V:IoT APG2-PCIA-B module Installation manual Version: 1.0 Date: 2019-07-04 SES-imagotag GmbH I St. Peter Grtel 10b I A-8042 Graz - AUSTRIA FB: FN350927w I HG : Graz I UID : ATU65936017 I WEEE : DE 65879240 T. +43 (0) 5 98 09-400 I F. +43 (0) 5 98 09-900 I E. office.at@ses-imagotag.com I www.ses-imagotag.com 1 Table of Contents 1 General .......................................................................................................................... 3 2 Description ..................................................................................................................... 5 3 Specification ................................................................................................................... 6 4 5 Installation ...................................................................................................................... 7 Labeling ......................................................................................................................... 8 6 Declaration ..................................................................................................................... 9 SES-imagotag GmbH I St. Peter Grtel 10b I A-8042 Graz - AUSTRIA FB: FN350927w I HG : Graz I UID : ATU65936017 I WEEE : DE 65879240 T. +43 (0) 5 98 09-400 I F. +43 (0) 5 98 09-900 I E. office.at@ses-imagotag.com I www.ses-imagotag.com 2 1 General This is OEM installation manual for APG2-PCIA-B module. If you have any problems with installation, please contact the SES-imagotag Support Team
(support.at@ses-imagotag.com). If there are questions regarding AP in which this module is installed, please contact AP manufacturer directly. Figure 1 APG2-PCIA-B module photo Figure 2 Retail IoT Connector Cisco Aironet 3800 SES-imagotag GmbH I St. Peter Grtel 10b I A-8042 Graz - AUSTRIA FB: FN350927w I HG : Graz I UID : ATU65936017 I WEEE : DE 65879240 T. +43 (0) 5 98 09-400 I F. +43 (0) 5 98 09-900 I E. office.at@ses-imagotag.com I www.ses-imagotag.com 3 Figure 3 Retail IoT Connector Cisco Aironet 3800 disassembled (APG2-PCIA-B module + Retail IoT Connector Cisco Aironet 3800 base board) SES-imagotag GmbH I St. Peter Grtel 10b I A-8042 Graz - AUSTRIA FB: FN350927w I HG : Graz I UID : ATU65936017 I WEEE : DE 65879240 T. +43 (0) 5 98 09-400 I F. +43 (0) 5 98 09-900 I E. office.at@ses-imagotag.com I www.ses-imagotag.com 4 2 Description APG2-PCIA-B module is responsible for transmitting and receiving messages from SES-
Imagotag electronic shelf label (ESL) network. It cannot work standalone and must be plugged into another device (host device), usually Access-point (AP), which supports the module. Configuration and startup of the module is done over the host device. This manual is not covering this because it is device dependent. Separate instruction manual is provided with each supporting host device. NOTE: This module is not standard mPCIe device!
Module just has same form factor as mPCIe. It is compatible only with dedicated devices. Figure 4 host device (Cisco AP) and Retail IoT Connector Cisco Aironet 3800 SES-imagotag GmbH I St. Peter Grtel 10b I A-8042 Graz - AUSTRIA FB: FN350927w I HG : Graz I UID : ATU65936017 I WEEE : DE 65879240 T. +43 (0) 5 98 09-400 I F. +43 (0) 5 98 09-900 I E. office.at@ses-imagotag.com I www.ses-imagotag.com 5 3 Specification Chipset: Texas instruments CC2650 Radio frequency: 2404-2480 MHz Output power: Max. 10 dBm Protocol: proprietary Modulation: MSK Data Rate: 250 kbps Supply voltage: 3.3V Supply power: Max. 0.5W Operating temperature: 0-60 C SES-imagotag GmbH I St. Peter Grtel 10b I A-8042 Graz - AUSTRIA FB: FN350927w I HG : Graz I UID : ATU65936017 I WEEE : DE 65879240 T. +43 (0) 5 98 09-400 I F. +43 (0) 5 98 09-900 I E. office.at@ses-imagotag.com I www.ses-imagotag.com 6 4 Installation This module must be installed by trained professionals only. It is not allowed for end user to install, remove or modify any of device connections. This module is ESD sensitive device. Make sure to discharge properly before touching it. Base board must be powered off. Grasp the module by its edges and align the notch in the connector on the base board. Insert the module into connector at around 30-degree angle. Lower the other end of the module and make sure it is aligned with screw holes. Insert and tighten two M2 screws or lock the card with fastener. Attach the antenna cable or antenna pigtail cable. Use only antenna provided with the module. Power on the host device and make sure green LED is lit on the module. SES-imagotag GmbH I St. Peter Grtel 10b I A-8042 Graz - AUSTRIA FB: FN350927w I HG : Graz I UID : ATU65936017 I WEEE : DE 65879240 T. +43 (0) 5 98 09-400 I F. +43 (0) 5 98 09-900 I E. office.at@ses-imagotag.com I www.ses-imagotag.com 7 5 Labeling Figure 5 Retail IoT Connector Cisco Aironet 3800 Label PCIA-APG2-B Module itself does not have a label. It is not sold by itself and it is used only in our equipment. Our equipments label contains FCC ID and IC ID of the APG2-PCIA-B Module as on the example above (Figure 5). SES-imagotag GmbH I St. Peter Grtel 10b I A-8042 Graz - AUSTRIA FB: FN350927w I HG : Graz I UID : ATU65936017 I WEEE : DE 65879240 T. +43 (0) 5 98 09-400 I F. +43 (0) 5 98 09-900 I E. office.at@ses-imagotag.com I www.ses-imagotag.com 8 6 Declaration FCC This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the authority to operate the equipment. IC This device contains licence-exempt transmitter(s)/receiver(s) that comply withInnovation, Science and Economic Development Canadas licence-exempt RSS(s).Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that maycause undesired operation of the device. Lemetteur/recepteur exempt de licence contenu dans le present appareil estconforme aux CNR dInnovation, Sciences et Developpement economique Canadaapplicables aux appareils radio exempts de licence. Lexploitation est autoriseeaux deux conditions suivantes: 1) Lappareil ne doit pas produire de brouillage; 2) Lappareil doit accepter tout brouillage radioelectrique subi, meme si lebrouillage est susceptible den compromettre le fonctionnement. SES-imagotag GmbH I St. Peter Grtel 10b I A-8042 Graz - AUSTRIA FB: FN350927w I HG : Graz I UID : ATU65936017 I WEEE : DE 65879240 T. +43 (0) 5 98 09-400 I F. +43 (0) 5 98 09-900 I E. office.at@ses-imagotag.com I www.ses-imagotag.com 9
| 1 | Internal photos | Internal Photos | 872.63 KiB | September 08 2019 |
Appendix 2 Photodocumentation Description: Front view Division:
Industry & Energy Department: FG Test report reference:
INE-AT/FG-19/207 Page: 1 of 9 Date: 05.07.2019 V T
|
t a
. v u
@
o t f n i
|
t a
. v u t
. w w w t a
. v u
@
e c i f f o
|
t a
. v u t
. w w w Appendix 2 Photodocumentation Description: Backside view Division:
Industry & Energy Department: FG Test report reference:
INE-AT/FG-19/207 Page: 2 of 9 Date: 05.07.2019 V T
|
t a
. v u
@
o t f n i
|
t a
. v u t
. w w w t a
. v u
@
e c i f f o
|
t a
. v u t
. w w w
| 1 | External photos | External Photos | 1.12 MiB | September 08 2019 |
Appendix 2 Photodocumentation Description: Power supply Division:
Industry & Energy Department: FG Test report reference:
INE-AT/FG-19/207 Page: 3 of 9 Date: 05.07.2019 V T
|
t a
. v u
@
o t f n i
|
t a
. v u t
. w w w t a
. v u
@
e c i f f o
|
t a
. v u t
. w w w Appendix 2 Photodocumentation Description: Test components Division:
Industry & Energy Department: FG Test report reference:
INE-AT/FG-19/207 Page: 4 of 9 Date: 05.07.2019 V T
|
t a
. v u
@
o t f n i
|
t a
. v u t
. w w w t a
. v u
@
e c i f f o
|
t a
. v u t
. w w w Appendix 2 Photodocumentation Description: Antenna Division:
Industry & Energy Department: FG Test report reference:
INE-AT/FG-19/207 Page: 5 of 9 Date: 05.07.2019 V T
|
t a
. v u
@
o t f n i
|
t a
. v u t
. w w w t a
. v u
@
e c i f f o
|
t a
. v u t
. w w w Appendix 2 Photodocumentation Description: Test setup Division:
Industry & Energy Department: FG Test report reference:
INE-AT/FG-19/207 Page: 6 of 9 Date: 05.07.2019 V T
|
t a
. v u
@
o t f n i
|
t a
. v u t
. w w w t a
. v u
@
e c i f f o
|
t a
. v u t
. w w w
| 1 | Sample label of a final product | ID Label/Location Info | 157.11 KiB | September 08 2019 |
V T
|
t a
. v u
@
o t f n i
|
t a
. v u t
. w w w t a
. v u
@
e c i f f o
|
t a
. v u t
. w w w
| 1 | Cover letter | Cover Letter(s) | 39.42 KiB | September 08 2019 |
Coverletter:
SES-Imagotag GmbH wants to get FCC-Certification for the following product:
digital network module APG2-PCIA-B. The unit will get the following FCC-ID: 2ACQM-APG2-PCIA-B List of documents:
File Thema
--------------------
extern_FG19-207.pdf Blockdiagramm_PCIA_AP.pdf Exhibit Label and placement sample label.pdf Exhibit 01 Not needed Exhibit 02 Exhibit 03 External Photos
* Exhibit 04 Block Diagrams
* Exhibit 05 Schematic Diagrams RFACP003C00C_Schematics_v1.0.pdf Exhibit 06 Exhibit 07 Exhibit 08 Exhibit 09 Exhibit 10 Exhibit 11
* Exhibit 12 Operational Description Cover letter Request for confidentiality FG19-207.pdf setup_FG19-207.pdf APG2-PCIA-B_Guide.pdf intern_FG19-207.pdf
--------------------
--------------------
FCC Protocol Timing Specification.pdf Operational Description APG2-PCIA-B.pdf This file Confidentiality Request_FCC_APG2-PCIA-
B_08.07.2019..pdf Testreport Test Set-up Photos User Manual Internal Photos Informations RF exposure Exhibit 13 For the Exhibits marked with * SES-imagotag GmbH requested Confidentiality according to 47 CFR 0.457 and 0.459 of the FCC rules because these are sensitive parts owned by this company and include much of Know-How or sensitive data, it will not be provided to the public. The labelling on some photos may be not the actual status. The correct labelling you can see on the label photo in Exhibit 1.
| 1 | Request for confidentiality | Cover Letter(s) | 48.17 KiB | September 08 2019 |
CON FI DENTIALITY REQU EST Federal Communication Commission Equipment Authorization Division, Application Processing Bra nch 7435 Oakland Mills Road Columbia, MD 21048 TO WHOM IT MAY CONCERN Pursuant to Paragraphs 50.457 and 0.459 of the Commission's Rules (47 C.F.R.) and Section 5552(b)(4) of the Freedom of lnformation Act, SES-imagotag GmbH (FRN: 0023782022) requests confidentiality for the following products:
July 08, 2019 FCC lD Number Product:Title/Model
. Product Code:
o APG2-PCIA-B FCC: 2ACQM- APG2-PCIA-B For the product stated above, we request that the following information be held confidential L. 2. Circuit diagrams, BOM, and PCBs submitted as Equipment Authorization Electronic Filing attach ment: "folder: Ha rdware"
Block diagram, Operational description submitted as Equipment Authorization Electronic Filing attachment:
o APG2-PCIA-B_Guide.pdf The above exhibits contain SES-imagotag GmbH trade secrets and proprietary information that could be of benefit to our competitors regarding the design of our Smart Tagging System. This material is not customarily available to the general public and we request that it be withheld from public inspection. lf you have any questions, please feel free to contact me at the address shown below. Sincerely, Philipp Jauck, BA Project Manager R&D
("
SES-imagotag GmbH Kalsdorfer Strasse L2 8072 Fernitz-Mellach, Austria Mobil: +43 664 88252901 philipp.ja uck@ses-imagotag.com www.ses-imagotag.com og 8072 Fernitz-Mellach Page t/L
| 1 | Test report | Test Report | 3.56 MiB | September 08 2019 |
TEST REPORT of the accredited test laboratory TV Nr.:INE-AT/FG-19/207 Applicant:
SES-imagotag GmbH Kalsdorfer Strasse 12 A 8072 Fernitz-Mellach Tested Product:
Networking controller transceiver module APG2-PCIA-B FCC-ID:
IC-ID:
2ACQM-APG2-PCIA-B 12154A-APG2-PCIA-B Manufacturer:
SES-imagotag GmbH Kalsdorfer Strasse 12 A 8072 Fernitz-Mellach Output power /
50,0 mV/m average power supply:
3V DC field strength:
@ 3m distance internal battery Frequency range:
2404,053 -
Channel separation: 0,35 MHz 2479,285 MHz Standard:
FCC: 47 CFR Part 15 (15. June 2018 edition) RSS-210 Issue 9, August 2016 TV AUSTRIA SERVICES GMBH Test laboratory for EMC Supervisor of EMC-laboratory:
Rundsiegel checked by:
Ing. Wilhelm Seier 05.07.2019 Ing. Michael Emminger A publication of this test report is only permitted literally. Copying or reproduction of partial sections needs a written permission of TV AUSTRIA SERVICES GMBH. The results of this test report only refer to the provided equipment. TV AUSTRIA SERVICES GMBH Office:
Deutschstrasse 10 1230 Vienna/Austria T: +43 5 0454-0 F: +43 5 0454-6505 E: pzw@tuv.at W: www.tuv.at Business Area Industry & Energy Austria Technik Testing Laboratory, Inspection Body, Certification Body, Calibration Laboratory, Verifizierungsstelle Notified Body 0408 IC 2932K-1 Non-executive Board of Directors:
KR DI Johann Marihart Management:
DI Dr. Stefan Haas Mag. Christoph Wenninger Registered Office:
Deutschstrasse 10 1230 Vienna/Austria Branch Offices:
www.tuv.at/standorte Company Register Court / - Number:
Vienna / FN 288476 f Bank Details:
IBAN AT131200052949001066 BIC BKAUATWW IBAN AT153100000104093282 BIC RZBAATWW VAT ATU63240488 DVR 3002476 QFM-EMV-FG_Protokoll Rev.00 / FG19-207.docx Page 1 of 14 05.07.2019 V T
|
t a
. v u
@
o t f n i
|
t a
. v u t
. w w w t a
. v u
@
e c i f f o
|
t a
. v u t
. w w w Test Report Reference:
INE-AT/FG-19/207 Ambient temperature: 25C Contents Relative humidity: 44%
1. 2. 3. 4. 4.1 4.2 4.3 4.4 4.5 Designation Applicant Description of EUT Standards / Final result Test results List of measurements according to 47 CFR 15 and RSS-210 Test object data Number of channels and channel spacing Duty Cycle for averaging Field strength at 2400 2483,5 MHz Emissions outside 2400 2483,5 MHz (15.209) Appendix Designation 1 2 Test equipment used Photodocumentation PAGE 3 4 5 6 7 8 9-11 12-14 PAGES 4 9 V T
|
t a
. v u
@
o t f n i
|
t a
. v u t
. w w w t a
. v u
@
e c i f f o
|
t a
. v u t
. w w w QFM-EMV-FG_Protokoll Rev.00 / FG19-207.docx Page 2 of 14 05.07.2019 Test Report Reference:
INE-AT/FG-19/207 Ambient temperature: 25C Relative humidity: 44%
1. Applicant Company:
SES-imagotag GmbH Department:
Product & Project Manager Address:
A 8072 Fernitz-Mellach; Kalsdorfer Strasse 12 Contact person:
Mr. Philipp Jauck EUT received on:
03.07.2019 Tests were performed on: 03.07.2019 V T
|
t a
. v u
@
o t f n i
|
t a
. v u t
. w w w t a
. v u
@
e c i f f o
|
t a
. v u t
. w w w QFM-EMV-FG_Protokoll Rev.00 / FG19-207.docx Page 3 of 14 05.07.2019 Test Report Reference:
INE-AT/FG-19/207 Ambient temperature: 25C Relative humidity: 44%
2. Description of EUT EUT:
Networking controller transceiver module APG2-PCIA-B Serial Number:
Prototype Manufacturer:
SES-imagotag GmbH A 8072 Fernitz-Mellach; Kalsdorfer Strasse 12 Description:
SES-imagotag GmbH provided the following configuration for the measurements:
Prototype with special test-firmware for continuous transmission Operating mode:
The measurements were carried out at the following running states:
test-firmware running, transmitting continuously Technical data EUT:
3VDC Rated voltage:
Rated current:
<1A Rated frequency: DC Mains voltage during the tests: 3VDC internal battery Climatic conditions in the emc laboratory:
Relative humidity: 44%
25C Temperature:
V T
|
t a
. v u
@
o t f n i
|
t a
. v u t
. w w w t a
. v u
@
e c i f f o
|
t a
. v u t
. w w w QFM-EMV-FG_Protokoll Rev.00 / FG19-207.docx Page 4 of 14 05.07.2019 Test Report Reference:
INE-AT/FG-19/207 Ambient temperature: 25C Relative humidity: 44%
3. Standards / Final result Name Title Deviation Result Title 47 CFR Part 15 1. Ocotber 2018 edition RADIO FREQUENCY DEVICES RSS-210 Issue 9, August 2016 Licence-Exempt Radio Apparatus:
Category I Equipment none none OK OK Result: Opinions and interpretation of testing laboratory OK: EUT passed NOK: EUT failed V T
|
t a
. v u
@
o t f n i
|
t a
. v u t
. w w w t a
. v u
@
e c i f f o
|
t a
. v u t
. w w w QFM-EMV-FG_Protokoll Rev.00 / FG19-207.docx Page 5 of 14 05.07.2019 Test Report Reference:
INE-AT/FG-19/207 Ambient temperature: 25C Relative humidity: 44%
4.1 TEST OBJECT DATA General EUT Description This transceiver module is working in a network consisting of a controller station, so called Accesspoint, and various displays. The Accesspoint transmits information to the displays and receives acknowledgements. This device is a module to be used in an access point controlling the network system. 2.1033 (c) Technical description 2.1033 (4) Type of emission: Minimum shift keying declared channel bandwidth 250 kHz virtual channel spacing about 0,35 MHz. Only 11 channels from the channel plan are used, therefore the channel spacing in reality is much higher and varies from 2,45 MHz minimum up to 17,15 MHz. 2.1033 (5) Frequency range: 2404,053 2479,285 MHz (channel center frequencies of channel 0 up to ch. 10) 2.1033 (6) Power range and Controls: The maximum field strength measured is 50,0 mV/m average
@ 3m distance. There is no power control or regulation. 2.1033 (7) Maximum output power rating: 50,0 mV/m average @ 3m distance. 2.1033 (8) DC Voltage and Current: 3 VDC (internal battery) maximum current consumption: 28,0mA during continuous transmission RSS-135 This standard does not apply to:
1.1.(a) a receiver that scans radio frequencies for the purpose of enabling its associated transmitter to avoid transmitting in an occupied frequency but which does not have the capability of decoding the message (e.g. converting it to audio voice) contained in the radio signal Tests were performed on: July 3rd 2019. V T
|
t a
. v u
@
o t f n i
|
t a
. v u t
. w w w t a
. v u
@
e c i f f o
|
t a
. v u t
. w w w QFM-EMV-FG_Protokoll Rev.00 / FG19-207.docx Page 6 of 14 05.07.2019 Test Report Reference:
INE-AT/FG-19/207 Ambient temperature: 25C Relative humidity: 44%
4.2 Number of channels and channel spacing 2.1033 Channel plan:
Tests were performed on channels 0, 4 and 10. Test Equipment used: N/A V T
|
t a
. v u
@
o t f n i
|
t a
. v u t
. w w w t a
. v u
@
e c i f f o
|
t a
. v u t
. w w w QFM-EMV-FG_Protokoll Rev.00 / FG19-207.docx Page 7 of 14 05.07.2019 Test Report Reference:
INE-AT/FG-19/207 Ambient temperature: 25C Relative humidity: 44%
4.3 Duty Cycle measurements for averaging Mode: data transmission (worst case in 100ms) 15.249 (e) According to the timing protocol description provided by the manufacturer and attached as technical description to the application for certification, the transmission burst time was checked to not exceed the declared value. The declared value was taken for calculation, as that gives the worst case. 2 Transmission bursts of 1,48ms length an 14 transmission bursts of 1,97ms length occuring in 100ms give a duty cycle of 30,54% or an average factor of -10,3 dB. This is the maximum duty cycle according to the protocol description. LIMIT SUBCLAUSE 15.249(e)
(e) As shown in 15.35(b), for frequencies above 1000 MHz, the field strength limits in paragraphs (a) and (b) of this section are based on average limits. However, the peak field strength of any emission shall not exceed the maximum permitted average limits specified above by more than 20 dB under any condition of modulation. For point-to-point operation under paragraph (b) of this section, the peak field strength shall not exceed 2500 millivolts/meter at 3 meters along the antenna azimuth. Test Equipment used: EMV-205 QFM-EMV-FG_Protokoll Rev.00 / FG19-207.docx Page 8 of 14 05.07.2019 V T
|
t a
. v u
@
o t f n i
|
t a
. v u t
. w w w t a
. v u
@
e c i f f o
|
t a
. v u t
. w w w Test Report Reference:
INE-AT/FG-19/207 Ambient temperature: 25C Relative humidity: 44%
4.4 Field strength of emissions at 2400 2483,5 MHz Operating on CH 0 (2404,053 MHz) 15.249 (a) (c) The maximum peak value measured was 104,3 dBV/m = 164,0 mV/m at 3m distance. With the averaging factor calculated on page 5 of this test report of -10,3 dB the maximum average value is then 94,0 dBV/m = 50,0 mV/m at 3m distance. LIMIT SUBCLAUSE 15.249(a) (c)
(a) Except as provided in paragraph (b) of this section, the field strength of emissions from intentional radiators operated within these frequency bands shall comply with the following:
Fundamental frequency Field strength of fundamental Field strength of harmonics
(millivolts/meter)
(microvolts/meter) 902928 MHz 24002483.5 MHz 57255875 MHz 24.024.25 GHz 50 50 50 250 500 500 500 2500
(c) Field strength limits are specified at a distance of 3 meters. Test Equipment used: EMV-100; EMV-101; EMV-102; EMV-103; EMV-105; EMV-110; EMV-200 V T
|
t a
. v u
@
o t f n i
|
t a
. v u t
. w w w t a
. v u
@
e c i f f o
|
t a
. v u t
. w w w QFM-EMV-FG_Protokoll Rev.00 / FG19-207.docx Page 9 of 14 05.07.2019 Test Report Reference:
INE-AT/FG-19/207 Ambient temperature: 25C Relative humidity: 44%
Field strength of emissions at 2400 2483,5 MHz Operating on CH 4 (2441,844 MHz) 15.249 (a) (c) The maximum peak value measured was 104,1 dBV/m = 160,3 mV/m at 3m distance. With the averaging factor calculated on page 5 of this test report of -10,3 dB the maximum average value is then 93,8 dBV/m = 49,0 mV/m at 3m distance. LIMIT SUBCLAUSE 15.249(a) (c)
(a) Except as provided in paragraph (b) of this section, the field strength of emissions from intentional radiators operated within these frequency bands shall comply with the following:
Fundamental frequency Field strength of fundamental Field strength of harmonics
(millivolts/meter)
(microvolts/meter) 902928 MHz 24002483.5 MHz 57255875 MHz 24.024.25 GHz 50 50 50 250 500 500 500 2500
(c) Field strength limits are specified at a distance of 3 meters. Test Equipment used: EMV-100; EMV-101; EMV-102; EMV-103; EMV-105; EMV-110; EMV-200 V T
|
t a
. v u
@
o t f n i
|
t a
. v u t
. w w w t a
. v u
@
e c i f f o
|
t a
. v u t
. w w w QFM-EMV-FG_Protokoll Rev.00 / FG19-207.docx Page 10 of 14 05.07.2019 Test Report Reference:
INE-AT/FG-19/207 Ambient temperature: 25C Relative humidity: 44%
Field strength of emissions at 2400 2483,5 MHz Operating on CH 10 (2479,285 MHz) 15.249 (a) (c) The maximum peak value measured was 104,1 dBV/m = 160,3 mV/m at 3m distance. With the averaging factor calculated on page 5 of this test report of -10,3 dB the maximum average value is then 93,8 dBV/m = 49,0 mV/m at 3m distance. LIMIT SUBCLAUSE 15.249(a) (c)
(a) Except as provided in paragraph (b) of this section, the field strength of emissions from intentional radiators operated within these frequency bands shall comply with the following:
Fundamental frequency Field strength of fundamental Field strength of harmonics
(millivolts/meter)
(microvolts/meter) 902928 MHz 24002483.5 MHz 57255875 MHz 24.024.25 GHz 50 50 50 250 500 500 500 2500
(c) Field strength limits are specified at a distance of 3 meters. Test Equipment used: EMV-100; EMV-101; EMV-102; EMV-103; EMV-105; EMV-110; EMV-200 V T
|
t a
. v u
@
o t f n i
|
t a
. v u t
. w w w t a
. v u
@
e c i f f o
|
t a
. v u t
. w w w QFM-EMV-FG_Protokoll Rev.00 / FG19-207.docx Page 11 of 14 05.07.2019 Test Report Reference:
INE-AT/FG-19/207 Ambient temperature: 25C Relative humidity: 44%
4.5 Emissions outside 2400 2483,5 MHz Channel 0 (2404,053 MHz) average values above 1 GHz are shown in magenta green = peak 15.249 (d) (e)
/
m V B d n i l e g e P 130 120 110 100 90 80 70 60 50 40 30 20 10 FCC ClassB F PK 9,602204409 GHz 59,201 dBV/m 9k 30 100k 300 1M 3M 10M 30 100M 300 1G 3G 10G 18G PK+_MAXH(1):APG2-PCIA-B_CH0_F1 PK+_MAXH(1):APG2-PCIA-B_CH0_F3 AVG_MAXH(1):APG2-PCIA-B_CH0_F3 PK+_MAXH Frequenz in Hz PK+_MAXH(1):APG2-PCIA-B_CH0_F2a FCC ClassB F PK PK+_CLRWR(1)@Jul2019_FCC_F0 AVG_CLRWR AVG_MAXH(1):APG2-PCIA-B_CH0_F2a FCC ClassB F QP 40dB PK+_CLRWR AVG_MAXH Worst case Emission: 59,2 dBV/m Peak at 9616 MHz equals to 48,9 dBV/m Average calculated with the factor described on page 8 of this test report. Quasipeak value at 44,35 MHz: 39,2 dBV/m. LIMIT SUBCLAUSE 15.249(d) (e) (15.209)
(d) Emissions radiated outside of the specified frequency bands, except for harmonics, shall be attenuated by at least 50 dB below the level of the fundamental or to the general radiated emission limits in 15.209, whichever is the lesser attenuation.
(e) As shown in 15.35(b), for frequencies above 1000 MHz, the field strength limits in paragraphs (a) and (b) of this section are based on average limits. However, the peak field strength of any emission shall not exceed the maximum permitted average limits specified above by more than 20 dB under any condition of modulation. For point-to-point operation under paragraph (b) of this section, the peak field strength shall not exceed 2500 millivolts/meter at 3 meters along the antenna azimuth. V T
|
t a
. v u
@
o t f n i
|
t a
. v u t
. w w w t a
. v u
@
e c i f f o
|
t a
. v u t
. w w w Test Equipment used:
EMV-100; EMV-101; EMV-102; EMV-103; EMV-105; EMV-110; EMV-111; EMV-112; EMV-200; NT-416 Remark: Although the measurements were made up to the 10th harmonic (25 GHz) the frequency range above 18 GHz is not automatized, so no graphs are available. Nevertheless no emissions above noise level were found in the frequency range above 18 GHz. QFM-EMV-FG_Protokoll Rev.00 / FG19-207.docx Page 12 of 14 05.07.2019 Test Report Reference:
INE-AT/FG-19/207 Ambient temperature: 25C Relative humidity: 44%
Emissions outside 2400 2483,5 MHz Channel 4 (2441,844 MHz) average values above 1 GHz are shown in magenta green = peak 15.249 (d) (e)
/
m V B d n i l e g e P 130 120 110 100 90 80 70 60 50 40 30 20 10 FCC ClassB F PK 9,776553106 GHz 53,864 dBV/m 9k 30 100k 300 1M 3M 10M 30 100M 300 1G 3G 10G 18G Frequenz in Hz PK+_MAXH(1):APG2-PCIA-B_CH4_F1 PK+_MAXH(1):APG2-PCIA-B_CH4_F3 AVG_MAXH(1):APG2-PCIA-B_CH4_F3 PK+_MAXH PK+_MAXH(1):APG2-PCIA-B_CH4_F2a FCC ClassB F PK PK+_CLRWR(1)@Jul2019_FCC_F0 AVG_CLRWR AVG_MAXH(1):APG2-PCIA-B_CH4_F2a FCC ClassB F QP 40dB PK+_CLRWR AVG_MAXH Worst case Emission: 53,8 dBV/m Peak at 9767 MHz equals to 43,5 dBV/m Average calculated with the factor described on page 8 of this test report. Quasipeak value at 44,35 MHz: 39,3 dBV/m. LIMIT SUBCLAUSE 15.249(d) (e) (15.209)
(d) Emissions radiated outside of the specified frequency bands, except for harmonics, shall be attenuated by at least 50 dB below the level of the fundamental or to the general radiated emission limits in 15.209, whichever is the lesser attenuation.
(e) As shown in 15.35(b), for frequencies above 1000 MHz, the field strength limits in paragraphs (a) and (b) of this section are based on average limits. However, the peak field strength of any emission shall not exceed the maximum permitted average limits specified above by more than 20 dB under any condition of modulation. For point-to-point operation under paragraph (b) of this section, the peak field strength shall not exceed 2500 millivolts/meter at 3 meters along the antenna azimuth. V T
|
t a
. v u
@
o t f n i
|
t a
. v u t
. w w w t a
. v u
@
e c i f f o
|
t a
. v u t
. w w w Test Equipment used:
EMV-100; EMV-101; EMV-102; EMV-103; EMV-105; EMV-110; EMV-111; EMV-112; EMV-200; NT-416 Remark: Although the measurements were made up to the 10th harmonic (25 GHz) the frequency range above 18 GHz is not automatized, so no graphs are available. Nevertheless no emissions above noise level were found in the frequency range above 18 GHz. QFM-EMV-FG_Protokoll Rev.00 / FG19-207.docx Page 13 of 14 05.07.2019 Test Report Reference:
INE-AT/FG-19/207 Ambient temperature: 25C Relative humidity: 44%
Emissions outside 2400 2483,5 MHz 15.249 (d) (e) Channel 10 (2479,285 MHz) average values above 1 GHz are shown in magenta green = peak
/
m V B d n i l e g e P 130 120 110 100 90 80 70 60 50 40 30 20 10 FCC ClassB F PK 9,921843687 GHz 52,299 dBV/m 9k 30 100k 300 1M 3M 10M 30 100M 300 1G 3G 10G 18G PK+_MAXH(1):APG2-PCIA-B_CH10_F1 AVG_MAXH(1):APG2-PCIA-B_CH10_F2a FCC ClassB F PK AVG_MAXH(1):APG2-PCIA-B_CH10_F3 PK+_CLRWR AVG_CLRWR Frequenz in Hz PK+_MAXH(1):APG2-PCIA-B_CH10_F2a PK+_MAXH(1):APG2-PCIA-B_CH10_F3 FCC ClassB F QP 40dB PK+_CLRWR(1)@Jul2019_FCC_F0 PK+_MAXH AVG_MAXH Worst case Emission: 52,3 dBV/m Peak at 9917 MHz equals to 42,0 dBV/m Average calculated with the factor described on page 8 of this test report. Quasipeak value at 44,35 MHz: 39,1 dBV/m. LIMIT SUBCLAUSE 15.249(d) (e) (15.209)
(d) Emissions radiated outside of the specified frequency bands, except for harmonics, shall be attenuated by at least 50 dB below the level of the fundamental or to the general radiated emission limits in 15.209, whichever is the lesser attenuation.
(e) As shown in 15.35(b), for frequencies above 1000 MHz, the field strength limits in paragraphs (a) and (b) of this section are based on average limits. However, the peak field strength of any emission shall not exceed the maximum permitted average limits specified above by more than 20 dB under any condition of modulation. For point-to-point operation under paragraph (b) of this section, the peak field strength shall not exceed 2500 millivolts/meter at 3 meters along the antenna azimuth. V T
|
t a
. v u
@
o t f n i
|
t a
. v u t
. w w w t a
. v u
@
e c i f f o
|
t a
. v u t
. w w w Test Equipment used:
EMV-100; EMV-101; EMV-102; EMV-103; EMV-105; EMV-110; EMV-111; EMV-112; EMV-200; NT-416 Remark: Although the measurements were made up to the 10th harmonic (25 GHz) the frequency range above 18 GHz is not automatized, so no graphs are available. Nevertheless no emissions above noise level were found in the frequency range above 18 GHz. QFM-EMV-FG_Protokoll Rev.00 / FG19-207.docx Page 14 of 14 05.07.2019 Division:
Industry & Energy Department: FG Test report number:
INE-AT/FG-19/207 Page: 1 of 4 Date: 05.07.2019 Appendix 1 Test equipment used V T
|
t a
. v u
@
o t f n i
|
t a
. v u t
. w w w Anechoic Chamber with 3m NT-100 measurement distance Stripline according to ISO 11452-5 Power quality analyzer Fluke 1760 (complete set) NT-108 Spectrumanalyzer FSP7 9 kHz 7 GHz NT-160 -
NT-173 NT-200 MA4000 - Antenna mast NT-110/1 ESCI - Test receiver NT-203/1 1 - 4 m height DS - Turntable 0 - 400 Azimuth CO3000 Controller Mast+Turntable NT-111/1 9 kHz - 7 GHz ESI26 Test receiver 20 Hz 26,5 GHz NT-112/1 Digital Radio Tester CTS55 NT-207 NT-208 HUF-Z3 - Log. Per. Antenna NT-121 Noise-gen., ITU-R 559-2 NT-209 200 - 1000 MHz 20 Hz 20 kHz FMZB1513 - Loop Antenna NT-122/1 CMTA - Radiocommunication NT-210 9 kHz - 30 MHz analyzer ; 0,1 - 1000 MHz HFH-Z6 - Rod Antenna NT-123 3271 - Spectrum analyzer NT-211 9 kHz - 30 MHz 3121C - Dipole Antenna NT-124 28 - 1000 MHz 3115 - Horn Antenna 1 - 18 GHz (immunity) 3116 - Horn Antenna 18 - 40 GHz NT-125 NT-126 100 Hz - 26,5 GHz Digital Radio Tester Aeroflex 3920 Mixer M28HW 26,5 GHz - 40 GHz RubiSource T&M Timing reference NT-212/1 NT-214 NT-216 SAS-200/543 - Bicon. Antenna NT-127 Radiocommunicationanalyzer NT-217 20 MHz - 300 MHz AT-1080 - Log. Per. Antenna NT-128 80 - 1000 MHz HK-116 - bicon. Antenna NT-129 20 MHz - 300 MHz HK-116 - bicon. Antenna 20 MHz - 300 MHz NT-130 3146 - Log. Per. Antenna NT-131 200 1000 MHz SWR 1180 MD Mixer M19HWD 40 GHz 60 GHz Mixer M12HWD 60 GHz 90 GHz DSO9104 Digital scope TPS 2014 Digital scope VULB 9163 Trilog Antenna NT-131/1 Artificial Ear NT-218 NT-219 NT-220/1 NT-222 NT-224 NT-132 1 kHz Sound calibrator NT-225 according to IEC 60318 30 3000 MHz Loop Antenna H-Field Horn Antenna 500 MHz - 2900 MHz Horn Antenna 500 MHz - 6000 MHz Log. per. Antenna 800 MHz - 2500 MHz Log. per. Antenna 800 MHz - 2500 MHz BiConiLog Antenna 26 MHz 2000 MHz PCD8250 HF 906 - Horn Antenna 1 - 18 GHz (emission) HZ-1 Antenna tripod BN 1500 Antenna tripod Conical Dipol Antenna NT-138 Ant. tripod for EN61000-4-3 NT-156 Model TP1000A NT-133 B10 - Harmonics and flicker analyzer NT-133/1 SRM-3006 NT-134 NT-135 Spectrumanalyzer E-field probe SRM 75 MHz 3 GHz Field Meter NBM-500 incl. E- and H-Field probes NT-137 Hall-Teslameter NT-139 EHP-50F NT-150 NT-151 ETM-1 EFA-3 H-field- / E-field probe H-field- / E-field probe Field Meter EMR-200 100 kHz 3 GHz E-field probe 100 kHz 3 GHz H-field probe 300 kHz 30 MHz NT-232 NT-233/1a NT-234 NT-240a-e NT-241 NT-243 NT-243/1 NT-244 NT-245 NT-246 Division:
Industry & Energy Department: FG Test report number:
INE-AT/FG-19/207 Page: 2 of 4 Date: 05.07.2019 Appendix 1 (continued) Test equipment used MDS 21 - Absorbing clamp NT-250 E-field probe 3 MHz 18 GHz H-field probe 27 MHz 1 GHz ELT-400 1 Hz 400 kHz 30 - 1000 MHz FCC-203I EM Injection clamp FCC-203I-DCN Ferrite decoupling network PR50 Current Probe i310s Current Probe Fluke 87 V True RMS Multimeter Model 2000 Digital Multimeter Fluke 87 V Digital Multimeter NT-247 T82-50 RF-Amplifier 2 GHz 8 GHz NT-331 NT-248 500W1000M7 - RF-Amplifier NT-332 80 - 1000 MHz / 500 W NT-249 AS0102-65R - RF-Amplifier NT-333 1 GHz - 2 GHz APA01 RF-Amplifier 0,5 GHz 2,5 GHz Preamplifier 1 GHz - 4 GHz MKU 152 A Preamplifier 100 MHz 23 GHz NT-252 Preamplifier for GPS NT-251 NT-253 NT-254/1 NT-260 DC Block 10 MHz 18 GHz NT-338 Model 8048 2-97201 Electronic load NT-341 NT-261 TSX3510P - Power supply NT-344 0-30 V / 0 - 10 A NT-262/1 TSX3510P - Power supply NT-345 0-30 V / 0 - 10 A ESH2-Z5-U1 Artificial mains NT-300 VDS 200 network 4x25A Mobil-impuls-generator ESH3-Z5-U1 Artificial mains NT-301 LD 200 network 2x10A Mobil-impuls-generator ESH3-Z6-U1 Artificial mains NT-302 MPG 200 network 1x100A Mobil-Impuls-Generators ESH3-Z6-U1 Artificial mains NT-302a EFT 200 network 1x100A PHE 4500/B Power amplifier EZ10 T-Artificial Network NT-304 Mobil-impuls-generator AN 200 S1 Artificial Network NT-305 FP-EFT 32M NT-400/1 3 ph. Coupling filter (Burst) SMG - Signal generator NT-310 PHE 4500 - Mains impedance NT-401 0,1 - 1000 MHz network SMA100A - Signal generator NT-310/1 IP 6.2 Coupling filter for data lines (Surge) NT-403 NT-312 TK 9421 High Power Volt. Probe NT-409 9 kHz - 6 GHz RefRad Reference generator NT-334 NT-335 NT-336 NT-337 NT-350 NT-351 NT-352 NT-353 NT-354 V T
|
t a
. v u
@
o t f n i
|
t a
. v u t
. w w w SMP 02 Signal generator NT-313 10 MHz - 20 GHz 40 MHz Arbitrary Generator NT-315 TGA1241 Artificial mains network NSLK 8127-PLC ESD 30 System up to 25 kV PSURGE 4.1 Surge generator IMU4000 Immunity test system VCS 500-M6 Surge-Generator Oscillatory Wave Simulator incl. Coupling networks BTA-250 - RF-Amplifier 9 kHz - 220 MHz / 250 W NT-316 NT-321 NT-324 NT-325/1 NT-326 NT-
328a+b+c NT-330 150 kHz - 30 MHz ESH2-Z3 - Probe 9 kHz - 30 MHz IP 4 - Capacitive clamp
(Burst) Highpass-Filter 100 MHz 3 GHz Highpass-Filter 600 MHz 4 GHz Highpass-Filter 1250 MHz 4 GHz Highpass-Filter 1800 MHz 16 GHz NT-410 NT-411 NT-412 NT-413 NT-414 NT-415 Appendix 1 (continued) Test equipment used Highpass-Filter 3500 MHz 18 GHz RF-Attenuator 10 dB DC 18 GHz / 50 W RF-Attenuator 6 dB DC 18 GHz / 50 W RF-Attenuator 3 dB DC 18 GHz / 50 W RF-Attenuator 20 dB DC - 1000 MHz / 25 W RF-Attenuator 30 dB DC - 1000 MHz / 1 W RF-Attenuator 30 dB RF-Attenuator 6 dB DC - 1000 MHz / 1 W RF-Attenuator 6 dB DC - 1000 MHz / 1 W RF-Attenuator 6 dB RF-Attenuator 0 dB - 81 dB NT-416 NT-417 NT-418 NT-419 NT-421 NT-423 NT-424 NT-425 NT-426 NT-428 NT-429 Division:
Industry & Energy Department: FG Test report number:
INE-AT/FG-19/207 Page: 3 of 4 Date: 05.07.2019 FCC-801-AF10 Coupling decoupling network FCC-801-S25 Coupling decoupling network FCC-801-T4 Coupling decoupling network FCC-801-C1 Coupling decoupling network NT-461 NT-462 NT-463 NT-464 SW 9605 - Current probe NT-465/1 150 kHz 30 MHz 95242-1 Current probe NT-468 1 MHz 400 MHz 94106-1L-1 Current probe NT-471 100 kHz 450 MHz GA 1240 Power amplifier according to EN 61000-4-16 NT-480 Coupling networks according to EN 61000-4-16 NT-481 -
NT-483 Van der Hoofden Test Head NT-484 EMC Video/Audiosystem NT-511/1 WRU 27 - Band blocking NT-430 ES-K1 Version 1.71 SP2 NT-520 27 MHz Test software WHJ450C9 AA - High pass NT-431 EMC32 Version 10.50.10 NT-520/1 450 MHz WHJ250C9 AA - High pass NT-432 250 MHz RF-Load 150 W Impedance transducer 1:4 ; 1:9 ; 1:16 NT-433 NT-435 RF-Attenuator DC 18 GHz NT-436 6 dB Test software SRM-TS Version 1.3 software for SRM-3000 SRM-TS Version 1.3.1 software for SRM-3006 Spitzenberger und Spies Test software V4.1 Noise power test apparatus according to EN 55014 NT-522 NT-522/1 NT-525 NT-530 RF-Attenuator DC 18 GHz NT-437 Vertical coupling plane NT-531 6 dB RF-Attenuator DC 18 GHz NT-438 10 dB RF-Attenuator DC 18 GHz NT-439 20 dB I+P 7780 Directional coupler 100 - 2000 MHz NT-440 ESH3-Z2 - Pulse limiter NT-441 9 kHz - 30 MHz Power Divider 6 dB/1 W/50 Ohm Directional coupler 0,1 MHz 70 MHz Directional coupler 0,1 MHz 70 MHz Tube imitations according to EN 55015 FCC-801-M3-16A Coupling decoupling network FCC-801-M2-50A Coupling decoupling network FCC-801-M5-25 Coupling decoupling network NT-443 NT-444 NT-445 NT-450 NT-458 NT-459 NT-460 V T
|
t a
. v u
@
o t f n i
|
t a
. v u t
. w w w
(ESD) Test cable #4 for EN 61000-4-6 Test cable #3 for conducted emission Test cable #5+#6 ESD-cable (2x470k) Test cable #8 Sucoflex 104EA Test cable #9
(for outdoor measurements) Test cable #10
(for outdoor measurements) Test cable #13 Sucoflex 104PE Test cable #21 for SRM-3000 Shield chamber Climatic chamber NT-553 NT-554 NT-555 +
NT-556 NT-559 NT-580 NT-581 NT-584 NT-592 NT-600 M-1200 Appendix 1 (continued) Test equipment used Anechoic Chamber 3 m / 5 m measuring distance Turntabel 6 m diameter Antenna mast 1 4 m EMV-100 EMV-101 EMV-102 Mast and Turntable controller EMV-103 FC-06 EMC Video/Audiosystem EMV-104 EMC Software EMC32 Version 10.50.10 EMV-105 Hornantenna 1 18 GHz EMV-110 HF 907 Antennapre.amp. 1 18 GHz EMV-111 ERZ-LNA0200-1800-30-2 Trilog Antenna 30-3000 MHz EMV-112 VULB9163 Monopol 9 kHz 30 MHz EMV-113 VAMP 9243 Antennapre.amp 18 40 GHz EMV-114 BBV 9721 Hornantenna 200 2000 MHz EMV-115 AH-220 DC Artificial Network PVDC 8300 AC Artificial Network NNLK 8121 RC EMI Receiver ESR26 EMV-150 EMV-151 EMV-200 Signalgenerator 9 kHz 40 GHz EMV-201 N5173B GPS Frequency normal EMV-202 B-88 DC Power supply N5745A EMV-203 Spektrum Analyzator EMV-205 FSV40 Thd Multimeter Model 2015 Poweramplifier PAS15000 Inrush Current Source Arb.-generator Sycore EMV-206 EMV-
207/abc EMV-
208/abc EMV-209 Harmonics/Flicker analyzer EMV-210 ARS 16/3 HF- Ampflifier 9 kHz-250 MHz BBA150 HF- Amplifier 80 -1000 MHz BBA150 EMV-300 EMV-301 HF- Amplifier 0,8 - 6 GHz EMV-302 BBA150 High Power Ant. 20-200 MHz EMV-303 VHBD 9134 Log.per Antenna 80-2700 MHz EMV-304 STLP 9128 E special Division:
Industry & Energy Department: FG Test report number:
INE-AT/FG-19/207 Page: 4 of 4 Date: 05.07.2019 Log.per Antenna 0,7 9 GHz EMV-305 STLP9149 HF- Ampflifier 9 kHz-250 MHz BBA150 (low noise) Load Dump Generator LD 200N EMV-306 EMV-350 Ultra Compact Symulator EMV-351 UCS 200N100 Automotive Power fail module EMV-352 PFM 200N100.1 Voltage Drop Symulator EMV-353 VDS 200Q100 Arb. Generator AutoWave EMV-354 Ultra Compact Symulator EMV-355 UCS 500N7 Coupling decoupling network EMV-356 CNI 503B7 / 32 A Coupling decoupling network EMV-357 CNI 503B7 / 63 A Telecom Surge Generator EMV-358 TSurge 7 Coupling decoupling network EMV-359 CNI 508N2 Coupling decoupling network EMV-360 CNV 504N2.2 Immunity generator NSG4060/NSG4060-1 Coupling network CDND M316-2 Coupling network CT419-5 ESD Generator NSG 437 Pulse Limiter VTSD 9561-F BNC Transient emission BSM200N40+BS200N100 Cap. Coupling Clamp HFK Mag. Field System MS100N+MC26100+MC2630 Coupling network CDN M2-100A Coupling network CDN M3-32A Coupling network CDN M5-100A Current Clamp CIP 9136A DC Artificial Network HV-AN 150 Coupling Clamp EM 101 Decoupling Clamp FTC 101 Power attenuator 10 dB / 250 Watt EMV-361 EMV-362 EMV-363 EMV-364 EMV-405 EMV-
450+451 EMV-455 EMV-
456-458 EMV-459 EMV-460 EMV-461 EMV-462 EMV-
464+465 EMV-466 EMV-467 EMV-469/2 V T
|
t a
. v u
@
o t f n i
|
t a
. v u t
. w w w Appendix 2 Photodocumentation Description: Front view Division:
Industry & Energy Department: FG Test report reference:
INE-AT/FG-19/207 Page: 1 of 9 Date: 05.07.2019 V T
|
t a
. v u
@
o t f n i
|
t a
. v u t
. w w w t a
. v u
@
e c i f f o
|
t a
. v u t
. w w w Appendix 2 Photodocumentation Description: Backside view Division:
Industry & Energy Department: FG Test report reference:
INE-AT/FG-19/207 Page: 2 of 9 Date: 05.07.2019 V T
|
t a
. v u
@
o t f n i
|
t a
. v u t
. w w w t a
. v u
@
e c i f f o
|
t a
. v u t
. w w w Appendix 2 Photodocumentation Description: Power supply Division:
Industry & Energy Department: FG Test report reference:
INE-AT/FG-19/207 Page: 3 of 9 Date: 05.07.2019 V T
|
t a
. v u
@
o t f n i
|
t a
. v u t
. w w w t a
. v u
@
e c i f f o
|
t a
. v u t
. w w w Appendix 2 Photodocumentation Description: Test components Division:
Industry & Energy Department: FG Test report reference:
INE-AT/FG-19/207 Page: 4 of 9 Date: 05.07.2019 V T
|
t a
. v u
@
o t f n i
|
t a
. v u t
. w w w t a
. v u
@
e c i f f o
|
t a
. v u t
. w w w Appendix 2 Photodocumentation Description: Antenna Division:
Industry & Energy Department: FG Test report reference:
INE-AT/FG-19/207 Page: 5 of 9 Date: 05.07.2019 V T
|
t a
. v u
@
o t f n i
|
t a
. v u t
. w w w t a
. v u
@
e c i f f o
|
t a
. v u t
. w w w Appendix 2 Photodocumentation Description: Test setup Division:
Industry & Energy Department: FG Test report reference:
INE-AT/FG-19/207 Page: 6 of 9 Date: 05.07.2019 V T
|
t a
. v u
@
o t f n i
|
t a
. v u t
. w w w t a
. v u
@
e c i f f o
|
t a
. v u t
. w w w Appendix 2 Photodocumentation Description: Test setup below 30 MHz Division:
Industry & Energy Department: FG Test report reference:
INE-AT/FG-19/207 Page: 7 of 9 Date: 05.07.2019 V T
|
t a
. v u
@
o t f n i
|
t a
. v u t
. w w w t a
. v u
@
e c i f f o
|
t a
. v u t
. w w w Appendix 2 Photodocumentation Description: Test setup 30-1000MHz Division:
Industry & Energy Department: FG Test report reference:
INE-AT/FG-19/207 Page: 8 of 9 Date: 05.07.2019 V T
|
t a
. v u
@
o t f n i
|
t a
. v u t
. w w w t a
. v u
@
e c i f f o
|
t a
. v u t
. w w w Appendix 2 Photodocumentation Description: Test setup above 1 GHz V T
|
t a
. v u
@
o t f n i
|
t a
. v u t
. w w w t a
. v u
@
e c i f f o
|
t a
. v u t
. w w w Division:
Industry & Energy Department: FG Test report reference:
INE-AT/FG-19/207 Page: 9 of 9 Date: 05.07.2019
| 1 | Test setup photos | Test Setup Photos | 1.09 MiB | September 08 2019 |
Appendix 2 Photodocumentation Description: Test setup below 30 MHz Division:
Industry & Energy Department: FG Test report reference:
INE-AT/FG-19/207 Page: 7 of 9 Date: 05.07.2019 V T
|
t a
. v u
@
o t f n i
|
t a
. v u t
. w w w t a
. v u
@
e c i f f o
|
t a
. v u t
. w w w Appendix 2 Photodocumentation Description: Test setup 30-1000MHz Division:
Industry & Energy Department: FG Test report reference:
INE-AT/FG-19/207 Page: 8 of 9 Date: 05.07.2019 V T
|
t a
. v u
@
o t f n i
|
t a
. v u t
. w w w t a
. v u
@
e c i f f o
|
t a
. v u t
. w w w Appendix 2 Photodocumentation Description: Test setup above 1 GHz V T
|
t a
. v u
@
o t f n i
|
t a
. v u t
. w w w t a
. v u
@
e c i f f o
|
t a
. v u t
. w w w Division:
Industry & Energy Department: FG Test report reference:
INE-AT/FG-19/207 Page: 9 of 9 Date: 05.07.2019
| frequency | equipment class | purpose | ||
|---|---|---|---|---|
| 1 | 2019-08-09 | 2404.053 ~ 2479.285 | DXT - Part 15 Low Power Transceiver, Rx Verified | Original Equipment |
| app s | Applicant Information | |||||
|---|---|---|---|---|---|---|
| 1 | Effective |
2019-08-09
|
||||
| 1 | Applicant's complete, legal business name |
SES-imagotag GmbH
|
||||
| 1 | FCC Registration Number (FRN) |
0024111486
|
||||
| 1 | Physical Address |
Kalsdorfer Strasse 12
|
||||
| 1 |
Fernitz-Mellach
|
|||||
| 1 |
Austria
|
|||||
| app s | TCB Information | |||||
| 1 | TCB Application Email Address |
a******@tuv.at
|
||||
| 1 | TCB Scope |
A2: Low Power Transmitters (except Spread Spectrum) and radar detectors operating above 1 GHz
|
||||
| app s | FCC ID | |||||
| 1 | Grantee Code |
2ACQM
|
||||
| 1 | Equipment Product Code |
APG2-PCIA-B
|
||||
| app s | Person at the applicant's address to receive grant or for contact | |||||
| 1 | Name |
P**** M******
|
||||
| 1 | Telephone Number |
00435******** Extension:
|
||||
| 1 | Fax Number |
00435********
|
||||
| 1 |
p******@ses-imagotag.com
|
|||||
| app s | Technical Contact | |||||
| n/a | ||||||
| app s | Non Technical Contact | |||||
| n/a | ||||||
| app s | Confidentiality (long or short term) | |||||
| 1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
| 1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
| if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
| app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
| 1 | Is this application for software defined/cognitive radio authorization? | No | ||||
| 1 | Equipment Class | DXT - Part 15 Low Power Transceiver, Rx Verified | ||||
| 1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | digital network transceiver module | ||||
| 1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
| 1 | Modular Equipment Type | Limited Single Modular Approval | ||||
| 1 | Purpose / Application is for | Original Equipment | ||||
| 1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
| 1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
| 1 | Grant Comments | Limited modular approval only for use by the applicant. | ||||
| 1 | Is there an equipment authorization waiver associated with this application? | No | ||||
| 1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
| app s | Test Firm Name and Contact Information | |||||
| 1 | Firm Name |
TUV AUSTRIA SERVICES GMBH
|
||||
| 1 | Name |
W**** S******
|
||||
| 1 | Telephone Number |
43-1-********
|
||||
| 1 | Fax Number |
43-1-********
|
||||
| 1 |
e******@tuv.at
|
|||||
| Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 1 | 1 | 15C | 2404.05300000 | 2479.28500000 | |||||||||||||||||||||||||||||||||||||
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC