Blue Tooth Hygro-thermometer NS-WSTB01 Sensorblue WO208 UNIT & LCD 6 7 4 5 2 1 3 27.8 C 36%
8 9 11 10 1. LCD display 2. LED indications light 3. Sensor holes 4. Wall hanger 5. Battery compartment 6. Reset 7. Unit change (F/C)
. 8 Temperature 9. Humidity 10. Connected 11. Battery status 1.GETTING STARTED 1. Slide back the battery cover and insert 3xAAA 1.5V batteries according to the polarities indicated. 2. Slide back the battery cover. The LED indication light is no flashing red/blue.
2 . DOWNLOAD THE APPLICATION AND CONNECT WITH SENSORBLUE. 1. On your smart device download either on Google's Play Store or Apple's App Store the APP Sensorblue. 2. Open the application and make sure your Bluetooth is switched on. 3. If the batteries are installed correct and the LED light is flashing red/blue the Sensorblue and the application will connect automatically within seconds. Note:
You do not need to pair with Sensorblue manually, simply open the app and rest is automatic. 3. MOUNTING SENSORBLUE:
Sensorblue is designed for hanging free on a flat surface. 1. Find the place you want Sensorblue to measure the temperature and humitdity. 2. Insert a nail or screw with a head smaller than 7mm 3. Mount sensorblue on the Wall hanger (4) If sensorblue can not be mounted on a wall, make sure it is lying on its back side to the best possible airflow for correct readings. 4. HOW TO CONNECT MULTIPLE SENSORS:
Simply follow the above steps. The application will automatically assign a channel
(up to 4) and remember that channel, unless the device is reset. 5.LOW BATTERY:
When the sensor is running low on battery, the LED light indication will flash red. The actual status of the battery can also be viewed in the application on your smart device. TROUBLESHOOTING:
My device will not connect with sensorblue!
- Make sure you device is BLE compatible and has iOS 6+ or Android 4.3 installed.
- Make sure your Bluetooth connection is turned on, on your smart device.
- Smart device and Sensorblue has to be within 10 meter of each other. My device was connected but can't reconnect.
- Make sure Sensorblue has sufficient battery power and both the LCD and LED light is on and flashing.
- Make sure your Bluetooth connection is turned on, on your smart device.
- Smart device and Sensorblue has to be within 10 meter of each other.
- If connection is not possible, remove battery cover and press the reset button (6)
- Sensorblue will now return to pairing mode, and you need follow step 2. I think Sensorblue is not measuring correct
- In order for sensor blue to measure the actual room / area's temperature and humidity, make sure the sensor is free from any obstacles and hanging freely with it's sensor holes (3) uncovered and in the direction of the room / area measuring area.
- Make sure sensorblue is NOT standing, so it covers it's sensor holes (3)
- Always allow Sensorblue 30-60min to adjust itself to a new environment. SOFTWARE MANUAL:
Choose your units. Confirm with DONE. Tap either Temperature or Humidity to see the history 1/2/3/4 indicates the active sensors. Name of Sensors can be changed in settings. See the Minimum/
Maximum/Average Dew/
Frost Point Temperature or Humidity Tap Dew Point to change to Frost Point Slide to see a full 48 hour history of your Sensor's recording Set your entire alert here. Tap to set value. On/Off on right side. See how much battery is left in your Sensors. Set your language. Set the Sound. Change the Sensors Name Share directly on Social Media See where, which sensor is located. Share on Facebook and Twitter DE Sensorblue WO208 UNIT & LCD 6 7 4 5 2 1 3 27.8 C 36%
8 9 11 10 1. LCD-Display 2. LED-Anzeigeleuchten 3. Sensorlcher 4. Wandaufhnger 5. Batteriefach 6. Reset 7. Einheitwechseln (F/C) 8. Temperatur 9. Luftfeuchtigkeit 10. Verbindungsanzeige 11. Batterieanzeige 1. ERSTESCHRITTE 1. ffnen Sie das Batteriefach und legen Sie 3 x AAA 1,5V Batterien der Polaritt nach ein. 2. Schlieen Sie das Batteriefach. Das LED-Anzeigelicht blinkt jetzt rot/blau.
2 . LADEN SIE DEN APP HERUNTER UND VERBINDEN SIE MIT SENSORBLUE 1. Laden Sie mit Ihrem Smart Device die App Sensorblue entweder aus Googles Play Store oder Apples App Store herunter. 2. ffnen Sie die App und stellen Sie sicher, dass Bluetooth aktiviert ist. 3. Wenn die Batterien korrekt eingelegt sind und das LED-Licht rot/blau blinkt, werden Sensorblue und die App automatisch innerhalb weniger Sekunden eine Verbindung erstellen. Hinweis:
Es ist nicht notwendig, eine manuelle Verbindung mit Sensorblue herzustellen. ffnen Sie einfach die App und der Rest geschieht automatisch. 3. SENSORBLUE MONTIEREN:
Sensorblue ist dafr geeignet, frei an flachen Oberflchen zu hngen. 1. Finden Sie eine Stelle, an der Sie Sensorblue aufhngen wollen, um Temperatur und Luftfeuchtigkeit zu messen. 2. Verwenden Sie eine Schraube oder einen Nagel, deren Kopf kleiner als 7mm ist. 3. Hngen Sie Sensorblue an den Wandaufhngern auf (4) Wenn Sensorblue nicht an einer Wand befestigt werden kann, sollten Sie sicherstellen, dass das Gert auf dem Rcken liegt, damit essich fr die korrekte Messung im bestmglichen Luftstrom befindet. 4. MEHRERE SENSOREN MITEINANDER VERBINDEN:
Befolgen Sie einfach die oben angegebenen Schritte. Die App wird automatisch einen Kanal zuweisen (bis zu vier Kanlen) und diesen erinnern, es sei denn, das Gert wird neu eingestellt. 5. SCHWACHEBATTERIE:
Wenn die Batterie des Sensors schwach ist, wird das LED-Anzeigelicht rot aufleuchten. Der aktuelle Status der Batterie kann auch mithilfe der App auf Ihrem Smart Device kontrolliert werden. FEHLERBEHEBUNG:
Mein Gert stellt keine Verbindung zu Sensorblue her
- Stellen Sie sicher, dass Ihr Gert BLE-kompatibel ist und iOS6+ oder Android 4.3 darauf installiert ist.
- Stellen Sie sicher, dass die Bluetooth-Verbindung auf Ihrem Smart Device eingeschaltet ist.
- Smart Device und Sensorblue drfen nicht mehr als 10 Meter voneinander entfernt sein. Mein Gert war verbunden, kann aber keine neue Verbindung herstellen
- Stellen Sie sicher, dass die Batterien vonSensorblueaufgeladen sind und sowohl LCD als auch das LED-Licht leuchten.
- Stellen Sie sicher, dass die Bluetooth-Verbindung auf Ihrem Smart Device eingeschaltet ist.
- Smart Device und Sensorblue drfen nicht mehr als 10 Meter voneinander entfernt sein.
- Wenn keine Verbindung hergestellt werden kann, entfernen Sie das Batteriefach und drcken Sie den Reset-Knopf (6).
- Sensorblue wird in den Verbindungsmodus zurckkehren und Schritt 2 muss wiederholt werden. Die Messungen von Sensorbluesind nicht korrekt
- Damit Sensorblue die eigentliche Raum- / Bereichstemperatur und
-feuchtigkeit messen kann, muss sichergestellt werden, dass der Sensor nicht verdeckt ist, dass er frei hngt und die Sensorlcher (3) unbedeckt in Richtung des Raumes /
Bereiches zeigen, in dem gemessen werden soll.
- Stellen Sie sicher, dass die Sensorlcher von SensorblueNICHT verdeckt sind (3).
- Lassen Sie Sensorblue 30-60 Minuten Zeit, um sich auf die neue Umgebung einzustellen. SOFTWARE GEBRAUCHSANWEISUNG:
Whlen Sie Ihre Einheit. Besttigen Sie mit DONE. Drcken Sie entweder auf TEMPERATURE oder HUMIDITY, um den Verlauf zu sehen. 1/2/3/4 zeigen die aktiven Sensoren an. Der Name des Sensors kann in den Einstellungen gendert werden. Sehen Sie die minimale/
maximale/
durchschnittliche/
Tauwetter-/
Gefrierpunktstemperatur oder Feuchtigkeit. Drcken Sie auf DEW POINT, um zum Gefrierpunkt umzuschalten. Stellen Sie alle Alarme hier ein. Drcken Sie hier, um die Werte einzustellen. An/Aus auf der rechten Seite. Sie knnen bis zu 48 Stunden der Aufnahmen Ihrer Sensorenanschauen. Hier knnen Sie den Batteriestatus der Sensoren sehen. Stellen Sie Ihre Sprache ein. Stellen Sie die Lautstrke ein. ndern Sie die Sensornamen. Teilen Sie direkt in den sozialen Medien. Sehen Sie, welcher Sensor geortet wird. Teilen Sie auf Facebook und Twitter DK Sensorblue WO208 ENHEDEN & LCD 6 7 4 5 2 1 3 27.8 C 36%
8 9 11 10 1. LCD-display 2. LED-lys 3. Mlehuller 4. Vgophng 5. Batteriholder 6. Nulstillingsknap 7. Skift mleenhed (F/C) 8. Temperatur 9. Luftfugtighed 10. Tilslutning 11. Batteriniveau 1. SDAN KOMMER DU I GANG 1. Fjern batteridkslet, og indst 3 AAA-batterier (1,5 V), s de passer til polanvisningerne (+/). 2. St batteridkslet p plads. LED-lyset blinker nu rdt/blt.
2 . DOWNLOAD APPEN OG TILSLUT DEN TIL SENSORBLUE 1. Download appen Sensorblue til din enhed fra enten Google Play eller Apple App Store. 2. Tnd for Bluetooth p enheden, og bn appen. 3. Hvis batterierne er korrekt indsat og LED-lyset blinker rdt/blt, vil Sensorblue automatisk tilslutte sig til appen i lbet af f sekunder. NB:
Du behver ikke tilslutte appen til Sensorblue manuelt. Du skal blot bne appen, og s tilslutter den sig automatisk. 3. MONTERING AF SENSORBLUE:
Sensorblue er designet til at hnge frit ud fra en jvn overflade. 1. Find det sted, hvor du nsker at mle temperatur og luftfugtighed med Sensorblue. 2. Indst et sm eller en skrue, hvis hoved er mindre end 7 mm i diameter. 3. Montr Sensorblue p vgophnget (4). Hvis det ikke er muligt at montere Sensorblue p en vg, er det vigtigt, at den ligger frit p en plan overflade med bagsiden nedad for at opn bedst mulig luftcirkulation, s den kan mle korrekt. 4. SDAN TILSLUTTER DU FLERE FORSKELLIGE SENSORER:
Flg de ovenstende punkter. Appen tildeler automatisk hver sensor en kanal (op til 4) og vil huske kanalen, medmindre apparatet nulstilles. 5. LAVT BATTERINIVEAU:
Nr sensoren er ved at lbe tr for strm, vil LED-lyset blinke rdt. Batteriniveauet kan desuden aflses p appen. FEJLFINDING:
Min enhed vil ikke tilslutte sig til Sensorblue!
- Srg for, at enheden er BLE-kompatibel og har iOS 6+ eller Android 4.3 installeret.
- Srg for, at Bluetooth er tndt p din enhed.
- Srg for, at der ikke er mere end 10 meter mellem din enhed og Sensorblue. Min enhed har vret tilsluttet, men vil ikke tilsluttes igen.
- Srg for, at Sensorblue er opladet, og at bde LCD-displayet og LED-lyset er tndt og blinker.
- Srg for, at Bluetooth er tndt p din enhed.
- Srg for, at der ikke er mere end 10 meter mellem din enhed og Sensorblue.
- Hvis det ikke er muligt at tilslutte enheden, skal du fjerne batteridkslet og trykke p nulstillingsknappen (6).
- Sensorblue vil nu vende tilbage til tilslutningsmodus. Flg punkt 2 herfra. Jeg tror ikke, Sensorblue mler korrekt
- For at Sensorblue skal kunne mle rummets/omrdets temperatur og luftfugtighed, er det vigtigt, at mleapparatet hnger helt frit, og at mlehullerne (3) er udkkede og vender ud imod rummet/omrdet.
- Srg for, at Sensorblue IKKE str sdan, at mlehullerne er dkkede (3).
- Giv altid Sensorblue 30-60 minutter til at tilpasse sig til et nyt milj. SOFTWARE-VEJLEDNING:
Vlg mleenhed Bekrft ved at trykke DONE. Tryk p TEMPERATURE eller HUMIDITY for at aflse mlingerne for hhv. temperatur og luftfugtighed. 1/2/3/4 betegner de aktive sensorer. Sensorernes navne kan ndres i indstillingerne. Afls temperaturen:
laveste (MIN), hjeste
(MAX), gennemsnit (AVG) og dugpunkt eller frysepunkt samt luftfugtighed. Tryk p DEW POINT
(dugpunkt) for at skifte til visning af frysepunkt
(FROST POINT). Indstil dine alarmer her. Tryk for at indstille vrdien. Til/fra vlges i hjre side. Glid fingeren til siden for at se de sidste 48 timers aflsninger. Afls dine sensorers batteriniveau. Indstil sprog. Indstil lyd. Skift navn p sensorerne. Del p sociale medier. Se placeringen af sensorerne. Del p Facebook og Twitter SE Sensorblue WO208 ENHET & LCD 6 7 4 5 2 1 3 27.8 C 36%
8 9 11 10 1. LCD-skrm 2. LED-lampor 3. Sensorhl 4. Hlfrvggmontering 5. Batterilucka 6. terstllningsknapp 7. Skifta Celsius/Fahrenheit. 8. Temperatur 9. Luftfuktighet 10. Frbindelsefinns 11. Batteristatus 1. TILL ATTBRJA MED 1. Dra ut batteriluckan och stoppa i3 st. AAA 1.5V-batterier
(var noga med att stta plus och minus rtt). 2. Stng batteriluckan. LED-lampan blinkar nu rtt/bltt.
2. LADDA NED APPENOCH KOPPLA TILL SENSORBLUE 1. Ladda ned appen APP Sensorblue till dinsmarttelefon (eller annan smartenhet) frn Google Play Store eller Apple App Store. 2. ppna appen; se till att Bluetooth r aktiverat. 3. Om batterierna sitter ordentligt och LED-lampan blinkar rtt/
bltt kommer Sensorblue och appen att koppla till varandra inom ett par sekunder. Mrk vl:
du behver inte koppla in Sensorblue manuellt, bara starta appens sker resten automatiskt. 3. MONTERASENSORBLUE Sensorblue ska hnga p en lodrt yta. 1. Vlj ut en plats dr Sensorblue ska mta temperaturoch luftfuktighet. 2. Fst en spik eller skruv dr;diametern p huvudet ska vara mindre n 7 mm. 3. Hng upp Sensorblue idess nyckelhl som r avsett fr detta (nr 4 p bilden). Om enheten inte kan monterasp en vgg, se till att den ligger helt plant med baksidan nert och med fritt luftflde runtomfr att mtdata ska bli s korrekta som mjligt. 4. HUR DU KOPPLAR IN FLERA OLIKA SENSORER Flj stegen ovan. Appen kommer automatiskt att ge varje sensor en egen kanal (upp till 4 olika) och komma ihg den kanalen, s lnge du inte terstller din Sensorblue. 5. SVAGT BATTERI Nr batterierna brjar bli svaga kommer LED-lampan att blinka rtt. Batteristatus syns ocks i appen p din smarttelefon(eller annan motsvarande smartenhet). FELSKNING Min mobil kopplarinte till Sensorblue!
- Den mste vara BLE-kompatibeloch ha iOS 6+ eller Android 4.3 installerat.
- Bluetooth mste vara aktiverat imobilen (eller motsvarande smartenhet).
- Smartenheten och Sensorblue mste vara inom 10 meter frn varandra. Min Sensorblue-enhet har varit kopplad men kan inte koppla till smartenheten igen
- Frskra dig om att enhetens batteri har tillrckligt kraft: r skrmen p och LED-lampan blinkar?
- r Bluetooth aktiverat p mobilen (eller motsvarande smartenhet)?
- r smartenheten och Sensorblue hgst 10 meter frn varandra?
- Om ja, och inget av dessa steg hjlper, dra ut batteriluckan lite och tryck p terstllningsknappen (nr 6 p bilden).
- Sensorblue kommer nu att terstllas. Flj sedan instruktionerna frn steg 2 och framt. Jag tror inte att Sensorblue mter korrekt
- Fr att kunna mta temperatur och luftfuktighet korrekt mste enheten hnga fritt p vggen med cirkulerande luft runtom, utan hinder i vgen. Sensorhlen (nr 3 p bilden) frinte tckas, och de ska vara riktade utt mot rummet/omrdet.
- Sensorbluefr INTE heller sts att hlen (nr 3 p bilden) tcks.
- Sensorblue kan behva 3060min fr att anpassa sig till en ny omgivning. BRUKSANVISNING FR PROGRAMVARAN Vlj Celsius eller Fahrenheit. Tryck DONE nr du har valt. Tryck antingen TEMPERATURE eller HUMIDITYfr att se historiken. 1/2/3/4 syftar p aktiva sensorer. Namnen p sensorernakan ndras i instllningar. Ls av temperaturen:
lgsta (MIN), hgsta (MAX), genomsnitt (AVG) och ven daggpunkt (DEW) och frostpunkt eller luftfuktighet. Tryck p DEW POINT
(daggpunkt) fr att ndratill FROST POINT
(frostpunkt). Stll in temperaturlarm hr. Tryck fr att stlla in vrden. Stll in p/av till hger. Blddra t sidanfr att se 48 timmars historikver mtningarna. Se hur mycket batteri som r kvar i de olika sensorerna. Stll in sprk. Stll in ljud. Sensornamn: ndra sensorernas namn. Dela via socialamedier. Sep karta var sensorerna r placerade. Dela p Twitter eller Facebook. FI Sensorblue WO208 MITTAUSLAITE & LCD-NYTT 6 7 4 5 2 1 3 27.8 C 36%
8 9 11 10 1. LCD-nytt 2. LED-merkkivalo 3. Mittausanturit 4. Ripustuskoukku 5. Paristokotelo 6. Nollauspainike 7. Asteikonvalinta (F/C) 8. Lmptila 9. Ilmankosteus 10. Yhteysmerkki 11. Paristontila 1. KYTTNOTTO 1. Liu'uta paristokotelon kansi auki ja pane kolme AAA-paristoa
(1,5 V) paikoilleen navat oikeaan suuntaan. 2. Sulje kansi. LED-merkkivalon pitisi nyt vilkkua punaisena/sinisen.
2. LATAA SOVELLUS JA LUO YHTEYS SENSORBLUE-
LAITTEESEESI 1. Lataa Sensorblue-sovellus lylaitteeseesi Googlen Play Storesta tai Applen AppStoresta. 2. Avaa sovellus ja varmista, ett laitteesi Bluetooth-toiminto on pll. 3. Jos paristot ovat oikein paikoillaan ja Sensorblue-laitteen LED-valo vilkkuu punaisena/sinisen, laite ja sovellus luovat yhteyden automaattisesti muutamassa sekunnissa. Huomaa:
Manuaalista yhdistmist ei tarvita. Kun avaat sovelluksen, yhteys laitteeseen muodostuu automaattisesti. 3. SENSORBLUE-LAITTEEN KIINNITTMINEN SEINN Sensorblue on suunniteltu ripustettavaksi tasaiselle seinpinnalle. 1. Valitse paikka, jossa haluat laitteen mittaavan lmptilaa ja ilmankosteutta. 2. Kiinnit seinn naula tai ruuvi, jonka kannan lpimitta on alle 7 mm. 3. Ripustalaiteripustuskoukusta (4). Jos laitetta ei voi kiinnitt seinn, aseta se lappeelleen, jotta ilma psee kiertmn mahdollisimman hyvin ja mittauslukemat ovat oikeita. 4. LISANTUREIDEN YHDISTMINEN Seuraa edell annettuja ohjeita. Sovellus luo lisantureille automaattisesti uuden kanavan (enintn nelj kanavaa) ja pit kanavatiedot tallessa, ellei laitetta nollata. 5. PARISTOJEN ALHAINEN VARAUSTASO Kun paristot ovat tyhjentymss, LED-merkkivalo vilkkuu punaisena. Paristojentilankyymyslylaitteensovelluksessa. VIANETSINT lylaitteeni ei saa yhteytt Sensorblue-mittariin.
- Varmista, ett laitteesi tukee BLE-standardia ja ett sen kyttjrjestelm on Android 4.3 tai iOS 6 tai uudempi.
- Varmista, ett lylaitteesi Bluetooth-toiminto on pll.
- lylaitteen tulee olla kymmenen metrin steell Sensorblue-laitteesta. lylaitteeni loi yhteyden aluksi, mutta ei ota yhteytt uudestaan.
- Varmista, ett Sensorblue-laitteen paristoissa on riittvsti virtaa, ett LCD-nytt ja LED-merkkivalo ovat pll ja ett merkkivalo vilkkuu.
- Varmista, ett lylaitteesi Bluetooth-toiminto on pll.
- lylaitteen tulee olla kymmenen metrin steell Sensorblue-laitteesta.
- Jos yhteyden muodostaminen ei onnistu, avaa paristokotelon kansi ja paina nollauspainiketta (6).
- Sensorblue palaa paritustilaan, mink jlkeen voit seurata ohjeita kohdasta 2 lhtien. Sensorbluen mittaustulokset ovat mielestni vri.
- Huoneen tai muun alueen lmptilan ja ilmankosteuden mittaaminen edellytt, ett anturin reikien (3) edess ei ole esteit, ett laite riippuu vapaasti seinll ja ett reit osoittavat mitattavaa huonetta tai muuta aluetta kohti.
- Varmista, ETTEIVT Sensorbluen anturin reit (3) ole peitossa.
- Uudessa ympristss Sensorbluelta kest 3060 minuuttia sopeutua muuttuneisiin olosuhteisiin. SOVELLUKSENKYTTOHJE Valitse asteikko. Vahvista DONE-
painikkeella. Napauta TEMPERATURE tai HUMIDITY nhdksesi tilastot. Numerot 1, 2, 3 ja 4 edustavat aktiivisia antureita. Antureiden nimi voi muuttaa asetuksissa. Tst net lmptilan tai ilmankosteuden minimi-, maksimi- ja keskiarvot sek kastepisteen tai jtymispisteen. Napauta DEW POINT nhdksesi jtymispisteen. Tst asetat kaikki hlytykset. Napauta arvon valitsemiseksi. Valitse oikealta On tai Off. Nytt pyyhkisemll saat nkyviin Sensorblue-
laitteen mittaustulokset viimeisten 48 tunnin ajalta. Tst net laitteidesi paristojen lataustason. Valitse kieli. Aseta net. Vaihda antureiden nimet. Jaa sosiaalisessa mediassa. Antureiden sijainti kartalla. Jaa Facebookissa ja Twitteriss. FCC ID: 2ACD3-WSTB01 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.