FCC ID: 2AY2T13433333221 REMOTE CONTROLLED DINOSAUR SERIES

2.4GHz 5-Channel R/C WALKING SIMULATION VELOCIRAPTOR Ages 6+

Z\ WARNING:

CHOKING HAZARD -Small parts. Not for children under 3 years. Please keep these instructions as they contain important information. SAFETY PRECAUTIONS:

- Parente: please read the instructions with your children before using the product for the first time. Stop the velociraptor with the remote control before picking it up.

- Keep hands, hair and clothing away from moving parts when the toy is operating.

- Do not use the velociraptor with the radio control in the street. Avoid collisions with people, animals and furniture.

- Warning: any change or modification made to this product that is not expressly approved in the relevant section of the declaration of conformity may terminate the usage authorisation granted to the user.

- The wires are not to be inserted into socket-out- lets. BATTERY WARNING:

- This transmitter cannot use 2 AA batteries higher than 1.5V

- Only professional personnel can disassemble and replace the lithium battery of the velociraptor.

- Do not recharge non-rechargeable batteries.

- Rechargeable batteries must be removed before recharging.

- Rechargeable batteries must be recharged under the supervision of an adult.

- Do not mix different types of batteries or new batteries with old batteries.

- Only use batteries of the recommended type or an equivalent type.

- Take care to respect the + and - polarities when inserting batteries.

- Used batteries must be removed from the product.

- Do not short-circuit the power terminals. battery packs etc.should not be disposed of with household waste. Batte- ries are dangerous for health and the environment. Help to protect the environment against health risks. Ask your child to dispose of batteries cleanly by taking them to your local collection points. In this way, batteries can be recycled safely. a4 The symbol showing a crossed-out rubbish bin indicates that or dinary batteries, rechargeable batteries, button batteries, CARE AND MAINTENANCE:

- Always remove the batteries from the transmitter if it is not used for a long time.

- Wipe the toy gently with a clean cloth.

- Keep the toy away from direct sources of heat.

- Do not immerse the toy in water, as this could damage electronic components.

- Replace batteries when they become less powerful.

- Operation temperature 0-40 C. please remove all batte-ries and dispose of them separately. Take electrical devices to a as Waste electrical and electronic equipment (WEEE): When this device reaches the end of its life, col-lection centre for electronic equipment and household appliances. Other components can be mag = disposed of with household waste. TRANSMITTER 1.Power Switch

@ Click the button -- Power on.

@ Press the button -- Power off. 2.DEMO BUTTON@)

@ Click the button,the velociraptor will show the walking(forward/backward/turn left/turn right) wagging its tail,swaying its body with different sounds automatically. 3.Forward button@), Backward button, Turn left button), Turn right button

@ Click --Walking forward.

@ Click @--Walking backward.

@ Click --Swaying the body from the left side.

@ Click --Swaying the body from the right side.

@ Click and at the same time--Walking forward from left side.

@ Click and at the same time--Walking forward from right side.

@ Click and at the same time--Walking backward from left side.

@ Click and at the same time--Walking backward from right side. Indicator

@ LED Indicator keep Flashing -- Frequency connection or remote control signals fail .

@ LED Indicator Constantly On -- Frequency connected successfully or without any operating actions. 4.0thers

@ Power saving mode:Remote control will be power off if without any operating actions. You should turn on the power button again to start . VELOCIRAPTOR 1.Power Switch

@ Slide the switch to "ON'position -- Power on.

@ Slide the switch to "OFF'position -- Power Off. 2.DEMO BUTTON(TRY-ME BUTTON) @)

@ Click the button,the velociraptor will show the walking,forwarding, sounding with light in its mouth automatically.

@ Press the buttom for 3 seconds to the sleeping mode.

@ When in sleeping mode,click the button to wake up the velociraptor,then turn on the transmitter again to start the game. 3.0THERS

@ Souding with light:Forward or backward with 3 different simulated sound and walking, mouth with light.

@ Low battery:If the velociraptor with low power,its action stopped after 3 seconds with"DI DI DIsound,means it needs to be charged.

@ Sleeping automatically:The velociraptor enter into the sleeping mode without any operating in 5 minutes;turn off the power switch then turn it on again or press the DEMO button to restart the velociraptor. VELOCIRAPTOR VELOCIRAPOR CHARGING 4.Charging port @)

@ Please inseret the Micro USB plug of the USB cable into the USB socket from the bottom of the velociraptor.

@ Then insert the anothe USB plug into the interface of the computer or other adapters(such as mobile phone charger).

@ Full charging time takes about 2 hours;Operating time about 2 hours.

@ The indicator from the bottom of the velociraptor turn to solid RED when in charging.

@ The indicator from the bottom of the velociraptor turn to OFF when fully charged.

@ Take away the USB cable,switch the power on to start the game. NOTES FOR CHAR GING:

>< It is strictly prohibited to put the battery in the high temperature heating place, such as the naked flame or electric heating device, otherwise, it is easy to cause damage or explosion.

>< DO NOT hit or strike the hard surface with the battery. No disassembly of the battery.

>< DO NOT immerse the battery in water. Keep the battery in a dry place. Please keep close watch of charging. NOTE:

@ The battery of the transmitter can only be installed or replace by the guardian.

@ Please replace the battery when the product function weakens.

@ Please keep the instructions properly for future reference.

@ Please strictly follow the instructions for the use of the product.

@ Users should reset the product for the product may have malfunction in electrostatic environment.

@ It is suggested to use the new alkaline batteries for the best functional effect. Detailed understanding of care and innovation/environment protection/ column

@ Article One Class C Equipment of Universal Micro Power (Short Distance) Wireless Device in Technical Requirements for Micro Power (Short Distance) Wireless Device.

@ It is strictly prohibited to use the various model transmitter in the center of the circle of the airport track center point and the area of radius 500m in order to ensure the requirements of aeronautical radio station. It is strictly prohibited to use model transmitter in the wireless control order period and area issued by the national relevant department.

@ With the intelligent onekey for startup and shutdown, the velociraptor and transmitter will automatically shutdown with no operation after 5 minutes, which can reduce the electric power loss. Press the power switch for re-start.

@ It may cause the system breakdown in some cases due to the static influence or other interference. At this time, the battery can be disassembled and re-loaded. The system can be restored to normal operation after the reset of system failure. TRANSMITTER BATTERY INSTALLATION Slide button to open and close the battery cover 1.Slide the button,then open the battery cover ;

os : 2.Install 2X1.5V"AA" batteries in the battery case

@ according to the positive(+)and negative(-)position. S1va 3.Close the battery cover and slide the button.

@1vaQ 2X1.5V"AA" batteries Multiple velociraptors operated at the same time 1.Turn on the velociraptor,then turn on the transmitter, push the joystick or press any one of keys on the transmitter, and the velociraptoris locked and connected to the transmitter successfully. 2.Turn on the velociraptor@),then turn on the transmitter@),push the joystick or press any one of keys on the transmitter, and the velociraptor@is locked and connected to the transmitter@) successfully. 3.Turn on @...N velociraptor and so on,then turn on the transmitters accordingly till they are locked and connected with their own velociraptor,now the velociraptors can be operated by their own transmitters independently.

(If not follow the steps as mentioned above,a transmitter can operate 2 or several velociraptors at the same time.) PROBLEM SOLVING THE PROBLEM Reaction of the power switch or indicator light off Out of control Interrupted or REASON

@ Low battery of velociraptor or the transmitter.

@ System program stop due to the velociraptor or the transmitter interference.

@ A remote velociraptor with the same frequency is operating around you and the velociraptor is locked with another transmitter.

@ Beyond the remote range.

@ High-frequency interference or near high-voltage wires, COUNTERMEASURES

@ Re-charge the car or replace the battery of the transmitter.

@ Take out the battery and re-load into the system for system reset.

@ Move it to the place with no wireless interference.

@ Shut of the transmitter of the same type and re-start the machine.

@ Avoid playing in such environment or choose other place for playing slow . transformers and some @ Replace new battery of the remote.action buildings. transmitter.

@ Low battery of the transmitter | @ Please get close to the transmitter battery. and play.

@ Re-charge the battery.

@ Battery exhaustion. @ Take out the foreign objects Slow velociraptor] @ Hair. soft things or other carefully. running or dirt are blocked on the hub. @ Contact with the distributor for running failure

@ Battery aging or poor motor. repair if it still cannot be restored after the failure exclusion. POWER OF TRANSMITTER:

Power type:DC 3V 0.5W Battery required:2 X 1.5V"AA"(Not included) Operation frequency:2.4GHz Operation temperature:0 C - 40C POWER OF VELOCIRAPTOR:

Power type:DC 3.7V 7W Battery required:3.7V 1200mAh Lithium-ion polymer(Included) Charging time:about 2 hours Charging temperature:0 C - 40 C VELOCIRAPTOR CHARGING CONNECTOR: USB CABLE:

Charging connector:Micro USB Charging voltage:DC 5V Voltage:5V 0.5A Rated power: =2.5W START GAME:

1.Install the batteries in the transmitter,make sure the velociraptor with full charging. 2.Turn on the power switch of the velociraptor,then turn on the power switch of the transmitter, now the velociraptor is connnecting with the transmitter successfully. 3.Pressing the "Forward" or "Backward"button on the transmitter,the velociraptor is walking forward or backward. 4.Pressing the "Forward" and "Turn Left"button on the transmitter at the same time,the velociraptor is walking forward from the left side.Other operations and functions,please refer to the"TRANSMITTER PART 3". 5.Press the "DEMO" button, the velociraptor will show different walking performance automatically(Refer to the" TRANSMITTER PART2",).It is suitable for the little child to watch the games. ACCESSORIES LIST a L 2.4GHz 5-Channel R/C WALKING . !

SIMULATION VELOCIRAPTOR Ages 6+

Z\ WARNING:

CHOKING HAZARD -Small parts Not for children under 3 yeas. USB cable X1 Only for charging Please keep these instructions as they contain important information. SAFETY PRECAUTIONS:

- Parente: please read the instructions with your children before using the product for the first, time, Stop the velociraptor with the remote control before picking it up.

~ Keep hands, hair and clothing away from moving parts when the toy is operating.

= Do not use the velociraptor with the radio control in the street. Avoid collisions with people, animals and furniture.

- Warning: any change or modification made to this product that is not expressly approved in the relevant section of the declaration of conformity may terminate the usage authorisation granted to the user.

~ The wires are not to be inserted into socket-out- lets. BATTERY WARNING:

- This transmitter cannot use 2 AA batteries higher than 1.5V

~ Only professional personnel can disassemble and replace the lithium battery of the velociraptor.

~ Do not recharge non-rechargeable batteries

~ Rechargeable batteries must be removed before recharging.

~ Rechargeable batteries must be recharged under the supervision of an adult. Do not mix different types of batteries or new batteries with old batteries.

~ Only use batteries of the recommended type or an equivalent type.

~ Take care to respect the + and - polarities when inserting batteries.

~ Used batteries must be removed from the product.

~ Do not short-circuit the power terminals. environment, Help to protect the environment against health risks, Ask your child to dispose of batteries cleanly by taking them to your local collection points. In this way, batteries canbe recycled safely Instructions X1 changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipmenthas been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 ofthe FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, ifnot installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation Ifthis equipment does cause harmful interference to radio or television reception, which can be determined by turing the equipment off and on, the useris encouragedto try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna

~ Increase the separation between the equipment and receiver. Connectthe equipmentinto an outlet on a circuit different from that to which the receiver is connected. Consultthe dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Fcc ID : 2AY2T13433333221 This device complies with Part 15 of the FCC Rules. Operation is bject to the following two conditions: (1) this device may not cause harmful interference, and ( this device must accept any interference received, including interference that may ca undesired operation.

SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Declaration Applicant Legal Business Name SHANTOU SUNMIR TOYS FACTORY DUTING ZONE,LIANXIA TOWN,CHENGHAI DISTRICT SHANTOU CHINA Address Grantee Code FCC ID Contact Email Contact Phone Authorized Contact Name PU DU 2AY2T 2AY2T13433333221 189200@qq.com

+86-754-85717283 a) b) c) d) e) I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare;

in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for:

labeling the equipment with the exact FCC ID as specified in this application,

(1)

(2) compliance statement labeling pursuant to the applicable rules,

(3) compliance of the equipment with the applicable technical rules, if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCCs technical requirements. in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements.

(1)

(2)

(3) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. the Applicant shall, upon request by SGS, at the Applicants expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a party for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature:

Date:2021-3-2 Print Name:

PU DU Title:

MANAGER

*NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database Applicant Declaration Rev:0.0

SHANTOU SUNMIR TOYS FACTORY To:

SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: SHANTOU SUNMIR TOYS FACTORY Regarding:

Confidentiality Request regarding application for FCC ID: 2AY2T13433333221 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commissions rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions Sincerely, Print Name: PU DU Signature:

Title: MANAGER On behalf of Company: SHANTOU SUNMIR TOYS FACTORY Telephone: +86-754-85717283 E-mail: 189200@qq.com

SHANTOU SUNMIR TOYS FACTORY TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2AY2T13433333221 To whom it may concern:

Date: 2021-03-02 We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch and Keny Xu in SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with SHANTOU SUNMIR TOYS FACTORY This authorization is valid until further written notice from the applicant. Print Name: PU DU Title: MANAGER On behalf of Company: SHANTOU SUNMIR TOYS FACTORY Signature:

Telephone: +86-754-85717283 E-mail: 189200@qq.com