FCC ID: 2A3XE-NXT-101 Smart Meat Thermometer

NXT-101 Smart Meat Thermometer User Manual Thank you for purchasing our product. This manual addresses the safety guidelines and operating instructions. Please review this manual thoroughly before operating your device. Operation Guide Power on/off Short press the Power/Set button to turn on the device. Long press the Power/Set button to shut down. Connect the probe to the device Plug the connector of the probe into the probe jack off the device. And the screen will display the current temperature of the probe. Switch the measurement unit You can use the App to switch the temperature unit(C/F). Notes:

1. When the measured temperature reaches the alert value you set, the temperature alarm will start beeping and the value display will keep flashing. Press button one the device to stop the beeping. 2. The temperature alarm is on by default. You can turn off the temperature alarm by APP. Using App App Installation You can use the device with Newxton BBQ APP, please download it from the APP store or Google Play store. You can scan the QR code here: (Or search for "Newxton BBQ") Android iPhone Pair the Device with Your Phone Press the Power/Set button to turn on the device. Enable the Bluetooth of your smartphone. Turn on the Newxton BBQ App on your phone. Follow the App prompts to pair devices. Notes:

When the device has a pairing record with the app, turn on the device and open the app on the phone, the device will reconnect to your phone. If you still fail to pair the device with your phone, please kill the App process and reopen the App for pairing. And disconnect the Bluetooth connection between the mobile phone and other devices. The App is only compatible with smartphones (Android or iPhone), not tablets or PCs. Using Tips Before using the device, clean the probe with a soapy sponge or cloth, the rinse and dry it. Always take your reading in the thickest part of the meat. Thin parts of the meat are difficult to measure because they tend to cook fast. Avoid touching the bone. If the tip touches the bone or heavy fat of the meat or the probe tip is not inserted deep enough, take a second reading to ensure accuracy. When measuring different foods or meats, it may be desirable to cool the probe first by rinsing the tip with cold water. It is recommended that you wipe the probe tip between readings. This is especially important when taking temperature readings form different foods or meat. After using the device, turn it off to reduce unnecessary power consumption. Warnings Do not put the device in the oven while cooking. Do not leave foods or liquids(anything over 572F/300)for more than one minute. in extremely hot the probe Always wear heat=resistant gloves to use the probes. Do not touch the probe or wire with bare hands during or right after measuring temperature since it may be very hot. Do not use this device in a microwave oven. Do not place this device in a place where the temperature is too high. Please operate the device within the ambient temperature range of 32F to 122F

(0 to 50). Do not place the probe in the dishwasher or completely immerse it in any liquid. For cleaning, please wipe the probe tip with a damp soapy cloth or sponge and dry it. Do not use the device in the rain. The thermometer is Keep the probes and wires away from children. This device is not intended for use by person under the not waterproof. age of 12. If this device is not in use for a long period of time, please remove its battery. Specifications NXT-101 ABS, food-grand stainless steel 4.0

-4F to 572F (-20 to 300) 1.8F/1 in the range of -4F to 302F (-20 to 150) 3.6F/2 in the range of -4F to 572F (-20 to 300)

-4F to 572F (-20 to 300) 1.8F/1 AAA battery 3V Model Material Bluetooth Measurement Range Measurement Accuracy Alert Temperature Range Temperature Resolution Battery Type Working Voltage FCC Statement This equipment has bee tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

--Reorient or relocate the receiving antenna.

--Increase the separation between the equipment and receiver.

--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

--Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) interference This device may not cause harmful interference, and (2) this device must accept any interference received, including that may cause undesired operation. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

C5266091_X10_Ed.1 Shen Zhen Niu Xiao Dun Technology Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Subject: Request for Confidentiality FCC ID: 2A3XE-NXT-101 Date: 12/30/2021 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules

(47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits ID Label/Location Attestation Statement External Photos Block Diagram Schematics Test Report Test Setup Photos Users Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) SDR Software / Security Info Long-Term Confidentiality No No No No No No Short-Term Confidentiality No No No No No Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Yinjie Shen Date: 12/30/2021 Title: Tech Leader 1/1

C5266091_X8_Ed.1 Letter of Authorization Company: Shen Zhen Niu Xiao Dun Technology Co., Ltd. Address: Room 378, Floor 3, East Block, Building 206, Chegongmiao Industrial Park, Tairan 7th Road, Shatou Street, Futian District, Shenzhen, Guangdong, China. Product Name: Smart Meat Thermometer Model Number: NXT-101 FCC Identifier: 2A3XE-NXT-101 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Yinjie Shen Date: 12/30/2021 Title: Tech Leader Signature of applicant:

1/1