Users Manual Model No: B048 Important safety instruction If used in the correct method, this design and production of this product can ensure your personal safety completely. However, any inappropriate use may lead to potential risk and danger of electric shock or fire hazard. Please read all the safety instructions before installing and using the product. In particular, attention shall be given to the following information:
1. It needs to be stored or used in the ambient temperature. 2. It shall not be placed in water or wet locations. 3. It cant be disposed randomly for it may cause environmental pollution. 4. Without approval, It shall not be disassembled or repaired. 5. The built-in lithium battery cant be disposed in the fire or other places to prevent causing fire hazards. 6. It shall be cleaned with dry cloth. 7. Whenever there is damage, it needs to be repaired by professional personnel. Charging the battery Fully charge the battery for about 3 hours before using the battery for the first time. 1. Plug the smaller end of USB charging cable into the Micro-USB interface of the connector. 2. Next, plug the other end of USB charging cable into other power charging devices or a computer with the power on. Status LED indicator Low battery Charging When power is low, then there will be a voice prompt dududu, while the RED LED flashes twice per 5second at music-playing mode (flashes once per 5s at other mode)this alarm will occur in every 3minutes, and it will lasts about 3-5 times until the headphone power off automatically. The red light solid on. Fully charged The red indicator will go out . Package content 1. Bluetooth ANC Headphone 2. user maunal Earphone indicator Product feature Pairing name Li-battery capability Talking time Playing time Charging time Charger mode Straight-line distance Operation instructions Operation instructions B048 500 mAh 30hours 25 hours 3 hours Micro USB 5V/500mA 10m function Key operation description LED status power on Long press power button for 3s Power off Pairing Long Press power button for 3s Press power button for 5s connection N/A it will go At Power off state, press power button for 3s, there is voice prompt power on". Loose the button, into pairing state automatically if its first device pairing; if the Bluetooth devices information existed before, it will go into standby state directly (headset re-pairs automatically in 3 minutes). it will power off if 10minutes no connection at standby state. At Power on state, press power button for 3s, there is voice prompt power off"
Blue LED light on for 2s, then it flash in an alternating pattern
(200mS) Red LED light on 2s and then go off At Power off state, long press power button for 5s, and it will go into pairing state while there is a voice prompt "Paring". At the same time the headphone will be detected by other device. There have voice prompt your phone is connect when Bluetooth pairing successfully Red and blue LED flash alternately Blue LED flash once every 5s status Disconnect(
automaticall N/A y) Play Short press power button If the phone disconnects automatically, there is a voice prompt your phone is disconnect Short press power button can replay the music while the headphone is in pause status Pause Short press power button Short press power button can pause the music while the headphone is in play status Volume up Volume down Short press Volume+(15 Level ) short press Volume-"(15 Level ) Short press Volume+ can increase the volume level while on music playing mode or talk mode, there will hear "beep" while the volume is to Max Short press Volume- can decrease the volume level while on music playing mode or talk mode, there will hear "Beep" at min volume while the volume is to Min Next Track Long Press Volume+
Previous Track Long Press Volume-
Long press Volume+ to go to next song Long press Volume- to go to next song Answer call Short press power button Short press power button can answer a call while there is a call incoming; again a short press of power key can end a call On call N/A N/A Reject call Voice transfer Call hold Long press power button for 2s Long press power button for 2s Press power button Press and hold for approximately 2s can reject a call while there is a call incoming button power Long press power button for 2s can transfer the voice between the headphone and phone after answering the call Long press power button can keep the current call while answering a call Remove call hold Short press power button Short press the power button can return to first call while in call hold status End call Short press power button Short Press the power button can end a call while the call in progress LED in an Blue flashes 200ms interval Blue Flashes every 5sec Blue LED Flesh once every 5sec LED twice Blue LED Flesh twice every 5sec Blue LED Flesh twice every 5sec Blue LED Flesh twice every 5sec Blue LED Flesh twice every 5sec RED LED flash fast in an alternating pattern
(200mS) Blue LED light will be always on Blue LED Flesh once every 5sec Blue LED light on Blue LED light on Blue LED Flesh twice every 5sec Blue LED Flesh twice every 5sec Multipoint A2DP Connection headphone phones(iPhone6sSamsungS6) connect can to two Redial last number Double click power button Double click power button can do redial last number RED LED flash in fast an alternating pattern
(200mS) Charging Line in low battery When in charging, the red LED will be always on; once the energy is full,it will go off When the Audio cable is plug in, the headphone will play music in line-in mode(the headphone will power off automatically) When power is low, then there will be a voice prompt dududu, while the RED LED flashes twice per 5second at music-playing mode (flashes once per 5s at other mode)this alarm will occur in every 3minutes, and it will lasts about 3-5 times until the headphone power off automatically. Pairing the headphones with a computer 1.Before pairing the headphone with your computer, please make sure your computer or laptop can support bluetooth function. If not, you must purchase a bluetooth adapter
(preferably version 2.1 or above). 2. Insert the bluetooth adapter to the computer, and make sure the bluetooth function of the computer is already activated. 3. Press the power button about 5s when the headphone is at power off status. It will go into paring mode when the blue and red LED light flash alternately, while you can also hear a prompt 4. Open the bluetooth software and choose to search the bluetooth device, and after few seconds, the names of bluetooth device will list out. 6. Click the pairing name Taotronics TT-BH040to pair, when there is a prompt beep, this means your headphone is paired successfully . FCC NOTICE This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction FCC ID: Z63-K8B048