FCC ID: 2AUB7-BEBTIE028 True Wireless Earbuds

BEBTIE028 2 1 USB 1 1 1 BEBTIE028

:V5.0+EDR DC 5V1A / OUTPUT 5V1A

: 40mAh / 300mAh

: 4 3 . 1

: HSP/HFP/A2DP/AVRCP 20-20000Hz 32 30 . 1-2 Pairing. BEBTIE028 3

. 5 3 power off. 5 . 2

. 1 Siri . 2 2 . 1. 2. 3. 10 4. 5. 6. User's Manual True Wireless Earbuds Product schematic diagram

.Package list Wireless earphones 2PCS Charging case 1PCS USB cable 1PCS User Manual 1PCS Packing box 1PCS Wearing schematic 1PCS Product specifications Headset pairing Name: BEBTIE028 Bluetooth version: V5.0 + EDR Power supply: input DC 5v1A / output 5v1A Battery capacity: headset 40mAh / charging box 300mah Working time: the headset can be used for about 4 hours at a time, and the charging box can be charged for about 3 times Charging time: 1 hour Support protocol: HSP / HFP / A2DP / AVRCP Frequency response: 20-20000hz Impedance: 32 For the first use, it is recommended to charge the product for 30 minutes Remarks:

Products use 1. Bluetooth pairing The two earphones are picked up from the charging box at the same time, the earphones are automatically turned on, and the indicator light flashes red and blue. After about 1-2 seconds, the red and blue lights of the two earphones alternately flash slowly, and the voice prompt

"pairing" means that the pairing of the two ears is successful Find the corresponding Bluetooth name "BEBTIE028" in the Bluetooth list of the mobile phone, click Connect to wait for pairing, and the voice prompts that the connection is successful for about 3 seconds When the headset is used for the same mobile phone again, it will automatically press the last paired connection Use other mobile phones, repeat the above operations 2 State of charge The red light is always on when the charging box is charging, and the blue light is always on when it is full When the charging box is charging the headset, the red light of the charging box is always on, the red light of the headset is on, and the lights of the headset and the charging box are off when the headset is full. 3 Call function Touch the headset function key for about 5 seconds, the red light of the headset flashes 3 times and the voice prompts "power off" the headset turns off. If the headset is not connected to an electronic device, it will turn off automatically after 5 minutes 4. Call When the headset is turned on and connected to the mobile phone, you can receive and make calls When calling, voice prompts the calling number, touch the function key of single headset to answer the call, and touch the function key for 2 seconds to reject the call. In the phone, a single touch of the function key will hang up the phone and return to the previous state. During the phone call, you can adjust the call volume through the mobile phone Touch the headset function key three times and replay the last number 5 Voice assistant Touch the left ear or right ear function key for about 1 second, and hear the prompt tone "beep"

to release the hand and wake up Siri function 6. Listen to music The headset is connected to the phone when it is turned on. You can use the headset to listen to music. In the process of music, press the headset function key briefly to pause the music, and press again to continue playing the music. Double click the right ear function key to play the next music, double click the left ear function key to play the previous music 7.Precautions 1. The earphones should be stored in a dry and ventilated environment.Keep it away from oil,water,steam,moisture and dust to avoid affecting product performance. 2. Do not clean this product with any detergent containing chemical element or other liquid. 3. Please use earphones according to the correct specifications, Pay attention to the influence of environment on earphones. It is recommended that the distance between the mobile phone and earphones be within 10 meters to ensure a smooth connection. If the earphones failed to connect or with poor communication or other problems, please do not disassemble earphones body and its accessories by yourself, otherwise you will lose the right to warranty. 4. 5. Please use the standard car charger or the charger specified by the company to charge the 6. To ensure normal use, Please make sure the earphonesare fully charged eraphones. FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirement.

FCC ID LABEL:

FCC ID: 2AUB7-BEBTIE028 Ca. 5mm x 10mm Include in manual:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Label Location

Shenzhen BEB Electronics CO., Limited Agent Authorization Company: Shenzhen BEB Electronics CO., Limited Address: Xinhuiteng Technology Park, Baoan District, Shenzhen, 518102, Guangdong, China Product Name: True Wireless Earbuds Model Number(s): BEBTIE028 Product Description: True Wireless Earbuds We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Date: Aug. 27, 2020 Signature:

Name:

Mia Wang Title:

CEO Company:

Shenzhen BEB Electronics CO., Limited

Shenzhen BEB Electronics CO., Limited Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Aug. 27, 2020 Subject; Request for Confidentiality FCC ID: 2AUB7-BEBTIE028 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Mia Wang Title: CEO