all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manual | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual | Users Manual | 2.11 MiB | ||||
1 |
|
Internal photos | Internal Photos | 1.16 MiB | ||||
1 |
|
External photos | External Photos | 420.80 KiB | ||||
1 |
|
Label | ID Label/Location Info | 61.70 KiB | ||||
1 |
|
Declaration Letter of Model Difference | Cover Letter(s) | 118.18 KiB | ||||
1 |
|
Power of Attorney Letter | Cover Letter(s) | 107.55 KiB | ||||
1 | RF Exposure Info | |||||||
1 |
|
FCC confidentiality request letters | Cover Letter(s) | 84.52 KiB | ||||
1 | Test Report | |||||||
1 | Test Setup Photos | |||||||
1 |
|
UNII Device Declaration Letter | Cover Letter(s) | 107.81 KiB |
1 | User Manual | Users Manual | 2.11 MiB |
Dreamer 1 User Manual www.potensic.com CONTENTS INTRODUCTION MAINTENANCE PACKAGE INCLUDES PRODUCT DIAGRAM BLADES BATTERY CAMERA MICRO SD CARD REMOTE CONTROLLER PHONE CLIP REMOTE CONTROLLER CHARGING CONTROLLING THE AIRCRAFT DRONE APP POTENSIC PRO CONNECTION SPECIFICATION DRONE STATUS AND INDICATOR STATUS DESCRIPTION NOTES AND DISCLAIMER WARNING 01 01 01 02 03 04 05 05 06 08 08 09 10 13 21 23 23 25 INTRODUCTION Thank you for purchasing the Potensic Dreamer 1 Drone. Please check this user manual carefully and save it for future reference. If you need any help, please contact our support team and provide your product Amazon/Website order number. Potensic Dreamer 1 is equipped with intelligent flight control system, which can realize the functions of way-point flight, intelligent follow, and auto return home. With a 1/3 inch Sony CMOS image sensor and a camera anti-shake system, the camera can stably shoot up to 30 frames per second of 2.7K high-definition video and 4.0 million pixels of photos. MAINTENANCE 1. Use a clean soft cloth to clean this product frequently. 2. Avoid heating or prolonged exposure to the sun. 3. Dont put the product in water. It will damage electronic parts. 4. Please check the plug and other accessories atregular intervals. If there is any damage, please stop using it immediately until it is repaired completely. PACKAGE INCLUDES Drone with 2.7K camera x1 Battery x1 Extra Blade x 2 (CCW & CW) Remote Controller x1 Drone Charger x1 Remote Controller x1 USB Charging Cable x1
(for remote controller) Quick Start x1 User Manual x1 01 PRODUCT DIAGRAM 4 7 2 5 1 3 6 8 9 10 11 12 02 1 2 3 2.7K Camera Dreamer LED Light Motor 4 5 6 Blade Front LED Tail LED 7 8 9 Shock Absorber Plate Landing Gear Foot Pad 10 Smart Battery 11 Power Indicator 12 Power Button (Short press once and then long press 2s to turn on / off the drone) BLADES Press down and rotate according to the marked direction of blade locking until it can not be turned;
unload the blade, reverse the above steps. When installing, please pay attention to the right rotating direction of the blades, which are printed with "CW" and "CCW". So, you need to install them according to "CW" and "CCW" marks. 03 BATTERY BATTERY CHARGING When the drone's power is too low, please fly the drone back and charge the battery in time. Connect the adapter to charge the battery. When charging, the indicator flashes. When full charged, the battery indicator lights will be off. The full charging time is about 2 hours. WARNING 1. Please charge the battery with a professional charger. 2. Do not charge on the carpet in case of fire. 3. Recharge every 3 months or so to keep the battery active. 4. Keep battery away from liquids, extreme heat (e.g fire or electric heating devices), and strong magnetic fields. 5. Do not use batteries to hit or knock hard surfaces. 6. Never break down batteries. 7. Do not leave when charging. BATTERY INSTALLATION AND TAKING OUT As shown in Pic 1, insert the battery in the right direction into the drone. As shown in Pic 2, pinch the buttons on the left and right sides of the battery and pull out the battery. Pic 1 Pic 2 Note: When you hear a click sound, indicating that the battery is fully inserted successfully. 04 CHARGING INDICATOR STATE LED 1 LED 2 LED 3 LED 4 Current battery capacity 0%~25%
25%~50%
50%~75%
75%~100%
Full Flashing status Lights out state CAMERA 1. Install the shock absorber ball on the shock absorber board and install the anti-tripping device. 2. Insert the power cable and steering wire of the camera into the connector of the aircraft adapter board, respectively. 3. Close the connecting wire cover. MICRO SD CARD Inset the Micro SD card into the camera SD card slot. It is recommended to use the brand product such as SanDisk, Kingston or Samsung, and needs Micro SD cards with at least 4GB and max up to 256GB. All the pictures and videos will be only saved in Micro SD card and not in App or your phone. The Micro SD card is not included in the package. 05 Insert the Micro SD card with its metal chip up. REMOTE CONTROLLER KNOW YOUR REMOTE CONTROL Dreamer1 uses a 2.4G remote controller with complete function keys. It can complete various operations and settings of aircraft and the camera within a maximum communication distance of 500 meters and display high-definition pictures on mobile devices in real time through App Potensic Pro. The remote controller is equipped with rechargeable lithium batteries, which can work continuously for up to 4 hours. 1 6 2 5 4 12 2 3 06 9 8 10 7 11 Folding Antenna Receive transmission signals Controlling Stick (Mode1 ) Pull the left stick up or down to take off and land the drone, pull the stick left or right to let the drone turn left or turn right. Short press the left stick to switch GPS mode or Attitude mode. Pull the right stick up or down to control the drone fly forward or backward, pull the stick left or right to let the drone left side or right side fly. Power Button Long press to turn on / off the remote. One-key Takeoff and Landing Long press 1s to take off or land your drone. One-key Return Press the button to return your drone back. Normal / Sport Mode Push the button to adjust the different speed of the drone 5m/s or 8m/s. Controlling Stick Storage Box There is a inner box to storage your controlling sticks. Camera Adjust Wheel Roll the wheel to adjust the Lens shooting angle, 90 adjustable. Take Photos Press the button to take a picture. Record Videos Press the button to record a video. Camera Brightness Adjust Roll the wheel to adjust the camera shooting brightness. Micro USB Charging Interface Charge the battery through this Micro USB interface. 07 1 2 3 4 5 6 7 8 9 10 11 12 PHONE CLIP Pull the remote control plate, and put your phone or tablet into it. Phone clip telescopic range:
97-178mm. REMOTE CONTROLLER CHARGING CHARGING INSTRUCTIONS Connect the Micro USB interface of the remote controller to charge the most commonly used 5V/2A charger. Full charging takes about 2 hours.
(The plug is Not Included) 5V 2A 08 CONTROLLING THE AIRCRAFT There two remote control modes for controlling the aircraft, mode 1 and mode 2. And the remote control is set to mode 1 by default. MODE 1 Left Stick Up Down Right Stick Forward Backward Turn Left Turn Right Left Right MODE 2 Left Stick Forward Right Stick Up Down Backward Turn Left Turn Right Left Right 09 DRONE APP POTENSIC PRO FOR ANDROID USERS Please search and download the drone App Potensic Pro in Google Play or scan the below QR to download the App. Compatible with phone with Android 5.0 or above version. For Android FOR IOS USERS Please search and download the drone App Potensic Pro in App Store or scan the below QR to download the App. Compatible with phone with iOS 9.0 or above version. For iOS REGISTRATION AND CONNECTION After downloading the drone App, you need to register your personal account to use it. REGISTRATION AND LOGIN METHOD Fill in the mailbox - fill in the password - check the agreement and agree - just click on registration;
login after successful registration. (Note: Please open your phone data network when registering.) DRONE WIFI CONNECTING STEPS Turn on the drone - Search drone WiFi on the phone - select drone WiFi name "Dreamer 1_XXXXXX"
- enter the WiFi password 12345678 to connect it. Note: For the first time you log on to APP, please keep the phone data network on, and enter the Map interface to start map data caching. 10 DRONE FLIGHT MODE Dreamer 1 uses a new generation of Potensic flight control, which supports the following flight modes GPS mode: Accurate hover, pointing flight and other intelligent flight modes are realized under the GPS mode. Under the GPS mode, when the GPS signal is strong, it can be positioned accurately. when the GPS signal is weak, the aircraft can not be positioned accurately, and it only provides attitude stabilization, and does not support intelligent flight function. Attitude mode: With the GPS is off, only attitude stabilization is provided. At this time, the maneuver rocker is used to control the flight of the aircraft. This mode is used cautiously by novices. OPERATION INTERFACE 1 2 3 4 5 6 7 19 18 17 16 8 9 11 10 15 14 13 12 20 1 2 3 4 5 Return to Homepage Connection Status Display the Current Mode of Drone GPS Signal 6 7 8 9 Drone Power Setting Interface Photo Video Transmission signal strength 10 File Saved in Micro SD Card 11 11 Camera Setting 12 Flight Height Flight Distance Flight Speed 13 14 15 16 Attitude Ball / Map 17 18 Flight Mode Setting One-button Return 19 One-button Take-off / One-button Landing Drone vertical flight speed 20 Camera Pitch Adjustment FLIGHT MODE 1 2 3 4 1 2 3 4 Normal / Sport Mode Switch Headless Mode Switch Unlock / Lock App Remote Control 5 6 5 6 7 8 7 8 Circle Flight Mode Way-point Flight Mode Following Mode GPS Mode / Attitude Mode 12 INTRODUCTION OF SETUP INTERFACE 1 2 3 4 5 1 2 3 Main Controller Settings Calibration Settings Remote Controller Settings 4 5 About Smart Battery More FLIGHT Matters Needing Attention When Flying 1. Make sure the remote controllers, smart flight batteries and mobile devices fully charged. 2. Check whether the fuselage is complete and the propeller is properly installed. 3. Whether the camera and the platform work properly after the power is turned on. 4. Make sure the App working properly. 5. Check whether the Micro SD card is inserted, and ensure that the camera is clean. 6. Low-power protection: When the battery power of the drone is less than 20%, the done will trigger one key return function. 7. Lost-of-control protection: The done will trigger one key return after disconnection for 3 seconds;
If the drone is successfully re-connection during return the drone will hover in the air. 8. Out-of-control protection: After the horizontal tilt angle is greater than 80 degrees 0.5 seconds, the drone will lock automatically and fall directly. CONNECTION CONNECTION BETWEEN THE REMOTE CONTROLLER AND THE DRONE The remote controller and the drone have been already paired when they leave the factory and can be controlled just after being powered on. But after replacing a new remote controller, the remote controller and the drone need to be re-paired to use. The pairing steps are as follows:
13 First, insert the battery into the drone and short press the battery switch and then long press the battery switch again for 7 seconds. At this time, the battery indicator is always on and the drone is turned on. Then, press down the middle key of the right stick and the Power Button together for a long time to enter the binding state (Pic 1). The four footlights will flash, the remote control power lights will flash slowly. Last, the remote control will emit a short "di" sound, and power lights are always on, drones four footlights are always on. The drone and the remote control is bounded successfully. Pic 1 CONNECTION BETWEEN THE DRONE AND THE APP First: turn on the drone, enter the mobile phone "settings" interface and enter WiFi setting, find
"Dreamer 1_XXXXXX" network and connect it. Second: open the App "Potensic Pro" in mobile phone and enter control interface. GEOMAGNETIC CALIBRATION The drone has been calibrated and can work normally in the factory. If the drone's geomagnetism is disturbed, it may need re-calibration. The steps are as follows:
First: Enter the Potensic App settings interface, click on the second column, and select the geomagnetic calibration in the list. The left front and left rear lights start to slowly flash, indicating that the calibration program is started. Second: Rotate the drone 360 degrees horizontally, the right front and right rear lights start to slowly flash. (Pic 1) Third: Rotate the drone 360 degrees vertically, the aircraft 4 LED lights will keep always on. Then the calibration is finished. (Pic 2) Fourth: If the 4 LED lights still keep slowly flashing, indicating that the calibration failed, it is suggested that you need to change a new take-off place and do the calibration again. 14 Pic 1 Pic 2 GYROSCOPE CALIBRATION During the flight, if the flying direction of the drone is deviated greatly, you need to place the drone on the horizontal flat and start gyroscope calibration. First: open the App, and click Second: choose Gyroscope Calibration. At this time, the drone will enter calibration status, then, the drone 4 LED lights will slowly flash 3 seconds. The Pop-ups will display calibration successful tip , indicating the calibration is successful. TAKE-OFF AND LANDING Safety Flight Tips Beginner mode is the default mode of operation for this product, in Beginner mode:
1. Flight Distance Limitation: 0-30m 2. Flight Altitude Limitation: 0-30m 15 Unlock the drone first: Push the left stick to down right and right stick down left together (Pic 1) to unlock the drone or just click the unlock key on the App. Then long press 1 second "take off and land" key, you will hear a short "di" sound or click icon on the APP. Then the drone will fly up slowly and hover at an altitude of about 1.2 meters. Pic 1 RETURN TO HOME(RTH) The Intelligent Return (RTH) function enables the aircraft to return to the final recorded take-off point. This function must be realized under the GPS mode. There are three types of intelligent return flight mode: One-button return, Low-Power return and Lost-of-signal return.
*One-button return:
Remote Control: Long press the "HOME" key on the remote control, you will hear a continue di sound. Then, the drone will auto fly back. Long press "HOME" key again to exit auto return and the di sound stops. 16 App Control: Click the "HOME" icon on the APP to start One-button return. And click the icon to cancel auto-return.
*Low power return:
Intelligent Return: When the power of the aircraft is less than 20%, the aircraft will automatically start the return mode. At this point, the remote control will emit di sounds, the battery power icon flashes on the App, and the Return icon lights up when the drone is flying back. Low-power Protection: The drone system will judge if the drone needs auto return according to the distance and the battery power situation. When the drone is flying back, its 4 LED lights continue to flash slowly until it lands on the ground.
*Lost-of-Signal Return:
When the drone lost connection with the remote control, it will auto fly back to 30m away from the controller. And the drone can reconnect the remote control when flying, then you need to operate the throttle stick to let it land. And you can push the left and right sticks inwards 45 to lock the motors. Note: The aircraft does not have an obstacle avoidance function. If the drone hits a building or some obstacle on the way auto-return, it will fall down. HEADLESS MODE Note:
Because the operator's operating position is very important for the realization of "headless mode"
when the frequency is aligned. Therefore, after entering the "headless mode", please do not change the operator's operation direction. Don't change the orientation Keep the same orientation of operator facing when in pairing as the pictures. Don't change the orientation 17 How to Start Headless Mode Put the drone on the ground with its head forward and its back against you, then pair the drone with the remote control. And click the headless mode button on the App to enter the headless mode and click the headless mode icon again to exit. Under the headless mode The forward direction is the direction the pilot faces where the pilot pairs the drone with the transmitter. If the pilot pushes the direction stick forward / backward, the drone will fly forward /
backward. If the pilot pushes the right stick left / right, the drone will fly left / right relative to you. It is very important that the pilot does not change positions or the direction he is facing, because this will cause confusion on the drone. ORBIT FLIGHT MODE Click the icon to enter Orbit Mode. (Circle Flight) Under normal flight conditions (flight altitude greater than 5 meters), the aircraft defaults to the current position as the center of the surround, 10 meters as the radius, 3m/s flying, clockwise surround flying. 18 FOLLOWING FLIGHT MODE Click the icon to start the Following Mode. The normal flight altitude must be more than 5 meters, and the GPS signal is greater than or equal to 6 stars. The drone will follow the mobile phone. WAY-POINT FLIGHT MODE Click the icon to start the Way-point Mode. Set several position point on the map, then the drone will fly according to the point you have set. Totally 1-15 position points can be set. At each point, the map will be marked with its serial number. The normal flight altitude is more than 5 meters, the GPS signal number is at least 6, the aircraft flies to the designated points on the map in the shortest path according to the ordinal number of points, and finally hovers at the last designated point. 19 SPECIFICATION DRONE Flying weight: 740g Maximum ascending speed: 5 m/s (sport mode); 3 m/s (normal mode) Maximum descent speed: 3 m/s (sport mode); 3 m/s (normal mode) Maximum horizontal flight speed: 8 m/s (sport mode); 5 m/s (normal mode) Flight time: about 30 minutes Working ambient temperature: 0- 40 C Satellite positioning systems: GPS + GLONASS Working frequency: 2.402 - 2.483GHz and 5.725 - 5.850GHz Transmitting power: 2.4GHz:<18 dBm 5.8GHz: <24 dBm Hovering accuracy (vertical): +0.1 m (when GPS positioning works normally) Hovering accuracy (Level): +0.3 m (when GPS positioning works normally) CAMERA Image sensor: 1/3 inch Sony CMOS; effective pixel 4.0 million Lens: FOV 78 degrees Maximum resolution: 2688 x 1512 Photo shooting mode: single shot Controllable range of rotation: +0 -90 Video resolution: 2.7K: 2688 x 1512 30p Maximum video storage bit stream: 20 Mbps Supporting file systems: FAT32 Picture format: JPEG Video format: MP4 (AVC/H.264) Support memory card type: Micro SD card; at least 4GB and maximum support 256GB, transmission speed of class 10 or above Micro SD card. Working environment temperature from 0 to 40 C REMOTE CONTROLLER Working frequency: 2.402 - 2.483GHz Maximum effective distance of signal: 500m (under environment with no interference and no occlusion) Working environment temperature: 0 ~ 40C. Battery: 1200mAh lithium battery, 1S Equivalent Omnidirectional Radiation Power (EIRP) 2.4GHz: <16 dBm Operating voltage / current: 3.7 V / 0.15 A 20 CHARGER Rated input: 100-240V ~ 50 / 60Hz, 1.5A Rated output: 17.5V, 1.5A Rated power: 26.25 W SMART BATTERY Capacity: 3000mAh Voltage: 15.2V Battery type: Li-Po 4S Energy: 45.6Wh Battery overall weight: 255g Working environment temperature: -10~40C Maximum charging power: 26.25W COMMON PROBLEMS AND SOLUTIONS Problems Solutions Equipment not connected properly. Restart the aircraft and remote control. Can't unlock the drone. No GPS signal or GPS satellite dropping can be found Aircraft cannot return to control point. Drone shakes or video shakes Cant take pictures and record videos. Check whether the aircraft finished the geomagnetic calibration successfully. Check the surrounding environment of the aircraft to see if there is high-frequency signal interference. When the aircraft takes off, it is necessary to ensure that the GPS satellite search reaches 6 or more than that. a. Check whether the propeller and motor axle of the aircraft are deformed or cracked, and replace them if necessary. b. Check whether the screw is fixed in place after disassemble and assembly of the aircraft. a. Check whether the aircraft is equipped with SD card. b. Check whether the format of SD card is correct. c. Check whether the Micro SD card is full or not. 21 DRONE STATUS AND INDICATOR STATUS DESCRIPTION Normal Status Light Status The First Second Time 1/4 1/4 1/4 1/4 The 2nd Seconds Low Battery of drone Four lights continue to flash slowly Binding state / boot Four LEDs continuousfast flashing Light on Light off Continuous loop...... Light on Light off Light on Light off Continuous loop...... Attitude Mode Four LEDs Solid on Light on Always GPS Mode Headless Mode Front LEDs solid light on Tail LED continuous slow flashing Four LEDs continuous slow flashing Rear LEDs solid light on Urgent stop or out Four LED lights of control
(motor shutdown) periodically quick flash Light on Light on Light off Continuous loop...... Light on Light off Continuous loop...... Light on Continuous loop...... Light off Light on Continuous loop...... NOTES AND DISCLAIMER IMPORTANT:
1. This product is not a toy. It is a precision device; integrating machinery and electronics with air mechanics and high frequency transmission. It requires correct assembly and debugging to avoid any accident. The user should operate and control this product in a safe manner. In case of incorrect operation, it may cause serious injury or damage property. It can also be lost due to incorrect operation. 2. This product is suitable for experienced UAV pilots no less than 14 years of age. 3. In the event of a problem during using, operating, or maintenance, please contact the local sales agent or retailer or keep in touch with the responsible staff of our company. 22 SAFETY PRECAUTIONS:
This R/C flying model can be dangerous when in use, please make sure you keep it far away from any persons or spectators when flying. In-correct installation, poor conditions, or users not familiar with operation may cause damage to the aircraft or injure people or may cause an unexpected accident. Please pay close attention to flying safety and learn to recognize more dangerous conditions which may cause an accident due to your own negligence. 1. Keep it far away from any structures or crowds. This R/C aircraft may vary slightly in speed or sensitivity while flying and can cause potential danger. Therefore, please keep it far away from crowds, buildings, trees, structures, high-voltage wire, etc. Please also avoid flying in adverse weather conditions such as rain, electrical storms, and high winds to ensure safety of the user, any spectators, and surrounding property. 2. Keep it away from any moist environment. The inside of the aircraft is composed of many precision electronic and mechanical parts. Therefore, please try to avoid any moisture or water content from entering the main body of the aircraft as it may cause a breakdown of the mechanical and electronic parts and thus cause an accident. 3. Only operate with included parts for intended use. Please use the original parts made by Potensic for any re-equipping or maintenance to ensure flying safety. Please operate and use only under the scope of the product function permitted. Using un-approved parts will void warranty. DO NOT use for any illegal purpose or use beyond the scope of which your local laws and regulations have stipulated. 4. Avoid controlling it independently. New users may have certain difficulties during the early stages of learning to operate this aircraft. Please try to avoid operating the aircraft alone. When available, always operate this aircraft under the guidance of a more experienced user. 5. Do not operate under the influence of drugs or alcohol. Please operate this R/C aircraft according to your own state and flying skill. Any fatigue, bad mental state, or incorrect operation may increase the probability of accidental risk. 6. Please keep a safe distance from aircraft when using top speed. When the operator is flying in high speed, please keep the aircraft far from the pilot and any surrounding persons or objects so as not to cause danger or damage. 7. Store it in a cool, dry place. The R/C aircraft is composed of material such as metal, fiber, plastic, electronics, etc. Therefore, please keep it away from any heat source and avoid prolonged exposure to direct sunlight. Excessive heat exposure can cause distortion and damage. NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can 23 radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interfer-ence to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
Please note that changes or modifications not expressly approved by the party responsible for compliance could void the uses authority to operate the equipment. FCC Radiation Exposure Statement For DRONE This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. For REMOTE CONTROLLER The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. WARNING 1. There is important information contained in this package and instruction manual, please keep it for future reference. 2. You have the responsibility to make sure that this model of aircraft wont cause injury to others body or cause any damage to property. 3. Please operate strictly as shown on the instruction manual when debugging or assembling this aircraft. During the process of flying or landing, please pay more attention to keep 1-2 meters between the user and the aircraft to avoid colliding to the head or face or body, which may cause injury. 4. Our company and distributors wont be responsible for any incorrect operation, which may cause loss or damage or injury to the body. 5. Children ages 14 and up should use this product under the guidance of an adult. This product is FORBIDDEN to be used by children under 14 years old. 6. Please correctly assemble and use this product as shown on the instruction manual or packing instruction. Some parts should be assembled by an adult. 7. Small parts are included with this product. Please place it beyond the reach of the children to avoid a CHOKING HAZARD or parts being mistakenly swallowed.
3OD\LQJRQWKHURDGRUQHDUKLJKWUDIFDUHDVLVVWULFWO\)25%,''(1VRDVQRWWRFDXVHDQ
accident. 9. Please dispose of the packing material timely so as not to cause injury to children. 10. Please DO NOT disassemble or re-equip the aircraft as it may cause a breakdown of the aircraft during flying. 11. Batteries in the battery compartment of the charger should be inserted into the designated power source which has the same logo as the product. 24 12. Built-in rechargeable 3.7V Li-ion battery included in the transmitter. 13. Only the original charger made from our factory can be used. 14. Charger is not a toy. 15. When charging the battery, please conduct it under the surveillance of an adult. Please also keep it far away from any combustible object when charging. Please keep this aircraft within eyesight when charging. 16. Please DO NOT make it short-circuited or squeeze the battery so as not to cause an explosion. 17. DO NOT mix the Li-ion battery with a different type of battery. 18. Intelligent lithium battery is loaded in the Quad-rotor. Both built-in or external can be used for charging. 19. Please DO NOT make the battery short-circuited or decompose the battery or throw the battery
LQWRWKHUH'2127SODFHWKHEDWWHULHVQHDUWKHKLJKWHPSHUDWXUHRUKHDWHGDUHDVXFKDVQHDU
WKHUHRUQHDUWKHHOHFWULFKHDWLQJGHYLFH
20. Aircraft should be kept far away from any other electric compliance or equipment as far as possible or kept far away from the place where having the magnetic object nearby as they may cause interference with each other. 21. Please keep the safe distance from the high-speed rotating rotor so as not to cause twisted or danger of being wounded or being cut. 22. Engine will heat up. Please DO NOT touch it to avoid being burned or injured. 23. Please DO NOT close this product to your ear as it may cause injury to your hearing. 24. Mini USB 5V wall charger recommended for charging. DO NOT use any charger stronger than 5V. 25. To comply with the command of the magnetic environment requirement formulated by the Aviation Radio Bureau and the related authority, during the regulated period in certain areas, please stop using the transmitter of this model when such regulation command is issued. 26. Keep your UAV within sight. 27. Never fly over groups of people. 28. Never fly over stadiums or sports events. 29. Understand airspace restrictions and requirements. WARNING: Product should only be used by adults and children 14 years and older.Adult supervision required for children under 14 years of age. WARNING: CHARGING OF THE DRONE BATTERY MUST BE SUPERVISED AT ALL TIMES BY AN ADULT. UNPLUG THE BATTERY WHEN FULLY CHARGED. DO NOT OVER-CHARGE THE BATTERY. 25
1 | Internal photos | Internal Photos | 1.16 MiB |
Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 2.4G Wireless Antenna(RX) Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15 GPS Antenna(RX) Fig. 16 Fig. 17
1 | External photos | External Photos | 420.80 KiB |
Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8
1 | Label | ID Label/Location Info | 61.70 KiB |
FCC ID: 2AUYR-DSDR01A-11D Label and Location Drone Model No.: DSDR01A FCC ID: 2AUYR-DSDR01A-11D This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Size: L: 3.0cm*W: 2.0cm Label and Location
1 | Declaration Letter of Model Difference | Cover Letter(s) | 118.18 KiB |
Shenzhen Botan Innovation Co.,Ltd. Add: 21th floor,Building A,Cadre Building,No.168 Tongsha Road,Shenzhen,ChIna Tel: +86 0755 82528674 Fax: /
Date: 2019-11-25 Dear Sir/Madam, DSDR11C, DSDR11D Sincerely, We, Shenzhen Botan Innovation Co.,Ltd. Hereby declares the following statement for Federal Communications Commission, PCB board, circuit, structure and internal of these model(s) are the same, Only model number is different for these model:
Product name: Drone Model no.: DSDR01A, DSDR01B, DSDR01C, DSDR01D, DSDR01E, DSDR01F, DSDR02A, DSDR02B, DSDR02C, DSDR02D, DSDR02E, DSDR03A, DSDR03B, DSDR03C, DSDR03D, DSDR03E, DSDR04A, DSDR04B, DSDR04C, DSDR04D, DSDR04E, DSDR05A, DSDR05B, DSDR05C, DSDR05D, DSDR06A, DSDR06B, DSDR06C, DSDR06D, DSDR07A, DSDR07B, DSDR07C, DSDR07D, DSDR08A, DSDR08B, DSDR08C, DSDR08D, DSDR09A, DSDR09B, DSDR09C, DSDR09D, DSDR10A, DSDR10B, DSDR10C, DSDR10D, DSDR11A, DSDR11B,
(Signed) Name / Title: Perry Bei /Manager Company: Shenzhen Botan Innovation Co.,Ltd. Address: 21th floor,Building A,Cadre Building,No.168 Tongsha Road,Shenzhen,ChIna Phone: +86 0755 82528674 Fax: /
E-Mail: perry@szdeepsea.com
1 | Power of Attorney Letter | Cover Letter(s) | 107.55 KiB |
21th floor,Building A,Cadre Building,No.168 Tongsha Road,Shenzhen,ChIna Shenzhen Botan Innovation Co.,Ltd. Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 To whom it may concern:
2019-11-27 We, Shenzhen Botan Innovation Co.,Ltd. the undersigned, hereby authorize Eurofins Product Service GmbH to act on our behalf in all matters relating to applications for equipment authorization FCC ID: 2AUYR-DSDR01A-11D including the signing of all documents related to these matters. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely,
(Signed) Name / Title: Perry Bei /Manager Company: Shenzhen Botan Innovation Co.,Ltd. Address: 21th floor,Building A,Cadre Building,No.168 Tongsha Road,Shenzhen,ChIna Phone: +86 0755 82528674 Fax: /
E-Mail: perry@szdeepsea.com
1 | FCC confidentiality request letters | Cover Letter(s) | 84.52 KiB |
CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046
<2019-11-25>
TO WHOM IT MAY CONCERN Pursuant to Paragraphs 0.457 and 0.459 of the Commissions Rules (47 C.F.R.) and Section 552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products:
FCC ID 2AUYR-DSDR01A-11D Model name DSDR01A, DSDR01B, DSDR01C, DSDR01D, DSDR01E, DSDR01F, DSDR02A, DSDR02B, DSDR02C, DSDR02D, DSDR02E, DSDR03A, DSDR03B, DSDR03C, DSDR03D, DSDR03E, DSDR04A, DSDR04B, DSDR04C, DSDR04D, DSDR04E, DSDR05A, DSDR05B, DSDR05C, DSDR05D, DSDR06A, DSDR06B, DSDR06C, DSDR06D, DSDR07A, DSDR07B, DSDR07C, DSDR07D, DSDR08A, DSDR08B, DSDR08C, DSDR08D, DSDR09A, DSDR09B, DSDR09C, DSDR09D, DSDR10A, DSDR10B, DSDR10C, DSDR10D, DSDR11A, DSDR11B, DSDR11C, DSDR11D For the product stated above, we request that the following information be held confidential;
Exhibits Long-Term Confidentiality Short-Term Short-Term Confidentiality Confidentiality Days External Photos Internal Photos Block Diagram Schematics Test Setup Photos Users Manual Parts List Tune Up Operational Descriptions The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. Sincerely,
(Signed) Name / Title: Perry Bei /Manager Company: Shenzhen Botan Innovation Co.,Ltd. Address: 21th floor,Building A,Cadre Building,No.168 Tongsha Road,Shenzhen,ChIna Phone: +86 0755 82528674 Fax: /
E-Mail: perry@szdeepsea.com
1 | UNII Device Declaration Letter | Cover Letter(s) | 107.81 KiB |
Shenzhen Botan Innovation Co.,Ltd. Add: 21th floor,Building A,Cadre Building,No.168 Tongsha Road,Shenzhen,ChIna UNII Device Declaration Letter To whom it may concern:
We have declared below featured for FCC equipment authorization, Device FCC ID:2AUYR-DSDR01A-11D
(1) DFS Device:
Master N/A Client with Radar detection capability Client without radar detection capability,
(2) Active / Passive Scanning ,adhoc mode access point capability Frequency Band
(MHz) Active Scanning (the device can transmit a probe (beacon)) passive scanning
(where the device is can listen only with no Ad Hoc Mode Capability Access point Capability 5745-5825 5755-5795 5775-5775 5180-5240 5190-5230 5210-5210 5260-5320 5270-5310 5290-5290 5500-5700 5510-5670 5530-5610 Yes Yes Yes Yes Yes Yes N/A N/A N/A N/A N/A N/A No No No No No No N/A N/A N/A N/A N/A N/A probes) Yes Yes Yes Yes Yes Yes N/A N/A N/A N/A N/A N/A No No No No No No N/A N/A N/A N/A N/A N/A Yes Yes Yes Yes Yes Yes N/A N/A N/A N/A N/A N/A No No No No No No N/A N/A N/A N/A N/A N/A Yes Yes Yes Yes Yes Yes N/A N/A N/A N/A N/A N/A No No No No No No N/A N/A N/A N/A N/A N/A
(3) Country code selection ability Yes If yes, pls explain how it was implemented:
No
(4) Meet 15.202 requirement Yes No pls check below :
A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network.
(5) For client devices that have software configuration control to operate in different modes (active scanning in some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non- DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes cannot be modified by end user or an installer. Apply
(If apply, pls help to provide explanation on it was implement, and how software was controlled) Does not apply Sincerely,
(Signed) Name / Title: Perry Bei /Manager Company: Shenzhen Botan Innovation Co.,Ltd. Address: 21th floor,Building A,Cadre Building,No.168 Tongsha Road,Shenzhen,ChIna Phone: +86 0755 82528674 Fax: /
E-Mail: perry@szdeepsea.com
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2019-11-29 | 5755 ~ 5795 | NII - Unlicensed National Information Infrastructure TX | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2019-11-29
|
||||
1 | Applicant's complete, legal business name |
Shenzhen Botan Innovation Co.,Ltd.
|
||||
1 | FCC Registration Number (FRN) |
0028942795
|
||||
1 | Physical Address |
21th floor,Building A,Cadre Building No.168 Tongsha Road
|
||||
1 |
21th floor,Building A,Cadre Building
|
|||||
1 |
Shenzhen
|
|||||
1 |
China
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
j******@eurofins.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
2AUYR
|
||||
1 | Equipment Product Code |
DSDR01A-11D
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
P****** B******
|
||||
1 | Title |
Manager
|
||||
1 | Telephone Number |
+86 0********
|
||||
1 | Fax Number |
+86 0********
|
||||
1 |
p******@szdeepsea.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | NII - Unlicensed National Information Infrastructure TX | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Drone | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | Yes | ||||
1 | Grant Comments | Output power listed is average conducted. This device supports 802.11a, 802.11n with a 20 MHz, 40 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Shenzhen HUAK Testing Technology Co., Ltd.
|
||||
1 | Name |
J****** Z******
|
||||
1 | Telephone Number |
+86-7********
|
||||
1 |
j******@cer-mark.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15E | MO | 5745 | 5825 | 0.0268 | |||||||||||||||||||||||||||||||||||
1 | 2 | 15E | MO | 5755 | 5795 | 0.0267 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC