FCC ID: 2AF9HHW9 Heart rate monitor armband

USER MANUAL Armband Heart Rate Monitor SCAN for more Cerca altro Nach mehr SUCHEN SCANNEZ pour plus ESCANEAR para ms 7 1 3 2

1 I

N T R

9 W H A L L A B O U T P A S S I O N 1 LED 2 Power on/o button 3 4 Optical Sensor 5 Charging Terminals

- 2 -

Function and Operation Power on: Short press button Light blue LED fast blink and vibrate. Power o: Long press the button for 2 seconds. LED light will ash red and vibrate. After powering on, Light blue LED fast blink, indicating that the device has not detected the heart rate. After the heart rate is detected, LED light can display the heart rate zone. Heart Rate Zone*

Intensity Breathing Light Color Zone 1(<60% MHR) Very Light Zone 2(60%-70% MHR) Light Zone 3(70%-80% MHR) Moderate Zone 4(80%-90% MHR) Hard Zone 5(90%-100% MHR) Maximum Note: The heart rate zone is calculated based on the maximum heart rate(MHR). Recommended MHR Calculation: 220 minus your age. The default MHR value is 200 bpm and can be set in the CoospoRide/Heartool app. Wearing 1. 2. 3. Remove the transparent cover from the back of HW9. Wear the armband on the upper forearm or on the inner or outer side of the upper arm . Adjust the armband to a comfortable length so it stays close to the skin. This will prevent it from sliding or coming loose during intense exercise and ensure accurate heart rate monitoring. Note: Please do not wear it on your wrist .

- 3 -

Connect to Device Connect to Sports and Fitness app (Bluetooth) 1. 2. Turn on the Bluetooth on your phone. Find the Sensor Settings Menu in the Sports & Fitness app. Take CoospoRide and Heartool app as example. Go to CoospoRide app > More > Sensors > Heart Rate Or go to Heartool app > Settings > Device > Add Device 3. Find the HW9 Bluetooth ID and select it in the app to connect. Note: Do not pair the sensor in the Bluetooth settings of your phone. Connect to smart devices, including tness equipment and sports watches

(Bluetooth and ANT+) 1. Select "Add HR sensor" from the smart device settings menu. 2. Find the Bluetooth or ANT+ ID for HW9 and select it to connect. While the device is working, short press the button to check its Bluetooth connection status:

Bluetooth is not connected: LED light ashes green. Bluetooth is connected: LED light ashes blue. Note: The information about sensor compatibility and connection instructions, please refer to: www.coospo.com/faq/hw9. Low Battery Alert & Charging Power<10%, Red LED slow blink for 10 seconds and remind the user every 5 minutes;

Power<1%, Red LED ash, device vibrate and turn o automatically. 1. Connecting the USB magnetic power cable to the device and the power source;

2. Green LED ashes: Charging Green LED is always on: Charging completed Charging time is about 1.5 hours. Note: To extend battery life, please use a DC 5V power adapter or a computer USB port for charging.

- 4 -

Specifications Weight Battery Life 10.6 gsensor only 35 Hours Wireless Transmission Bluetooth 5.0 & ANT+

Battery Type Rechargeable Lithium Battery Working Temperature Range 0~60(-4~140) Charging Temperature Range 10~45(32~113) Size Waterproof 41.3 x 33.8 x 11 mm IP67 Standard Accessories Heart Rate Monitor with Armband x1 Charging Cable x1 User Manual x1 Contact us Website: www.coospo.com E-mail: support@coospo.com Disclaimer The information contained in this manual just for reference. The product described above may be subject to alteration owing to the manufacturer's continuing research and development plans, without making an announcement in advance. We shall not bare any legal responsibility for any direct or indirect, accidental or special damages, losses and expenses arising from or in connection with this manual or the contained product. This product is for sports purposes only and it's not meant to replace any medical device.

- 5 -

Connecting the USB magnetic power cable to the device and the power source;

FCC statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help Changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

- 6 -

IC WARNING This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada' s licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. L' metteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR d' Innovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. L' exploitation est autorise aux deux conditions suivantes :

(1)

(2) L' appareil ne doit pas produire de brouillage;

L' appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d' en compromettre le fonctionnement. Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Contact your local government or a retailer for additional information. Do not open or modify the product. Do not disassemble or attempt to service this product. This product is safe under normal and reasonably foreseeable operating conditions. If product is operating improperly, call COOSPO support.

- 7 -

[Shenzhen COOSPO Tech Co., Ltd.]

[6th Floor (south), Building A, Dingxin Science Park, 67 District, Baoan]

[Shenzhen]

[China.]

Date: Jun. 15, 2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2AF9HHW9 US Agent Attestation Statement / Part 2.911(d)(7)

[Shenzhen COOSPO Tech Co., Ltd.] certifies, that as of [Jun. 15, 2023], we have designated FCC US Agent, LLC to accept service of process on our behalf for FCC ID: 2AF9HHW9.

[Shenzhen COOSPO Tech Co., Ltd.], accepts to maintain an agent of service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. FCC US Agent, LLC, accepts as of the date of the filing of this application, the obligation of being the designated agent for the purpose of accepting service of process on behalf of [Shenzhen COOSPO Tech Co., Ltd.] for FCC ID: 2AF9HHW9. Designated Agent Information:

Company Name: FCC US Agent, LLC FRN: 0033402884 Address: 3722 Illinois Avenue, Saint Charles, IL, 60174, USA Contact Person: Tim Payne Phone: 708-571-3148 Email: Support@FCCUSAgent.com Sincerely, Company: [Shenzhen COOSPO Tech Co., Ltd.] Designated Agent: FCC US Agent, LLC Company Representative: [Aaron Lin]

Tel: +86-755-23594795 Email: Aaron@coospo.com Signature:

Designated Agent Representative: Tim Payne Signature:

Shenzhen COOSPO Tech Co., Ltd. 6th Floor (south), Building A, Dingxin Science Park, 67 District, Baoan, Shenzhen, China. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Jun. 15, 2023 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2AF9HHW9 Product Name: Heart rate monitor armband Model Name: HW9, HW10, HW20, HW30, HW40, HW50, HW60, HW70, HW80, HW90

[Shenzhen COOSPO Tech Co., Ltd.] (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely,

(Applicant signature) Name: Aaron Lin Title: General Manager

Shenzhen COOSPO Tech Co., Ltd. 6th Floor (south), Building A, Dingxin Science Park, 67 District, Baoan, Shenzhen, China. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Jun. 15, 2023 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2AF9HHW9 Product Name: Heart rate monitor armband Model Name: HW9, HW10, HW20, HW30, HW40, HW50, HW60, HW70, HW80, HW90

[Shenzhen COOSPO Tech Co., Ltd.] (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Sincerely,

(Applicant signature) Name: Aaron Lin Title: General Manager

Shenzhen COOSPO Tech Co., Ltd. 6th Floor (south), Building A, Dingxin Science Park, 67 District, Baoan, Shenzhen, China Agent Authorization Company: Shenzhen COOSPO Tech Co., Ltd. Address: 6th Floor (south), Building A, Dingxin Science Park, 67 District, Baoan, Shenzhen, China. Product Name: Heart rate monitor armband Model Number(s): HW9, HW10, HW20, HW30, HW40, HW50, HW60, HW70, HW80, HW90 Product Description: Heart rate monitor armband We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Name:

Aaron Lin Title:

General Manager Company: Shenzhen COOSPO Tech Co., Ltd. Date: Jun. 15, 2023

Shenzhen COOSPO Tech Co., Ltd. 6th Floor (south), Building A, Dingxin Science Park, 67 District, Baoan, Shenzhen, China Jun. 15, 2023 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: Explanation of differences between product types FCC ID: 2AF9HHW9 Models: HW9, HW10, HW20, HW30, HW40, HW50, HW60, HW70, HW80, HW90 To Whom It May Concern:

We, The Shenzhen COOSPO Tech Co., Ltd. hereby declare that the model : HW9 is identical with the model : HW10, HW20, HW30, HW40, HW50, HW60, HW70, HW80, HW90, except the model name. Except for the different above, no other modification is performed. Sincerely, Shenzhen COOSPO Tech Co., Ltd. Signature:

[Aaron Lin, General Manager]

Shenzhen COOSPO Tech Co., Ltd. 6th Floor (south), Building A, Dingxin Science Park, 67 District, Baoan, Shenzhen, China. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: 2AF9HHW9 Date: Jun. 15, 2023 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description Parts List In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Aaron Lin Title: General Manager