DA KAI INDUSTRIES LIMITED. Federal Communications Commission Equipment Authorization Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2019.12.22 Subject; Limited single modular approval request Company name: DA KAI INDUSTRIES LIMITED. FCC ID: 2APYU-DKL1613 Dear Sir/Madam, This letter includes the FCC application requirements for limited single modular approval request for;-
FCC KDB 996369 D01 Module Certification Guide v02; and FCC KDB 996369 D03 OEM Manual v01 In accordance with 47CFR 15.212 Modular Transmitters and KDB 996369 D01 Module Equip Auth Guide v02. FCC the following requirements. ID: 2APYU-DKL1613 has been examined against Requirement per 15.212 and KDB 996369 D01 The radio elements must have the radio frequency circuitry shielded. Physical components and tuning capacitor(s) may be located external to the shield, but must be on the module assembly. The module must have buffered modulation/data inputs to ensure that the device will comply with Part 15 requirements with any type of input signal. The module must contain power supply regulation on the module. The module must contain a permanently attached antenna, or contain a unique antenna connector, and be marketed and operated only with specific antenna(s), per 15.203, 15.204(b), 15.204(c), 15.212(a), 2.929(b). The module must demonstrate compliance in a stand-alone configuration. The module must be labeled with its permanently affixed FCC ID label, or use an electronic display (see KDB Publication 784748). The module must comply with all specific rules applicable to the transmitter, including all the conditions provided in the integration instructions by the grantee. The module must comply with RF exposure requirements Explanation from Grantee
(do not write yes/no, but explain why product complies/how it is achieved) No, The module dont have a RF shielding. Yes, The module has its own buffered modulation/data inputs unit. Yes, The module has a power supply circuitry. Yes, The module has a permanently antenna. Yes, The module compliance a stand-alone configuration. Yes, The label is pasted on the bottom of the module. Yes, The module compliance all conditions provided in the integration instructions by the grantee. Yes, The module compliance with RF exposure requirements FCC Modular Approval Request Rev 3.0 DA KAI INDUSTRIES LIMITED. Integration Instructions for host product manufacturers The following items are submitted in support of application for Modular Transmitter FCC ID as noted above as required by the FCC KDB 996369 D03 OEM Manual v01. These items are provided as integration instructions for host product manufacturers (e.g., OEM instruction manual) to use when integrating a module in a host product. Any requirements that are not applicable to the Module are as indicated below. Requirements of KDB 996369 D03 Summary of requirements and Checklist. Refer to the KDB for description of the complete requirements;
User Manual Page Number KDB reference Ref Sect Page 30 Page 30 Page 31 N/A Page 30 Page 30 Page 30 Page 31 List of applicable FCC rules Summarize the specific operational use conditions Limited module procedures Trace antenna designs RF exposure considerations Antennas Label and compliance information Information on test modes and additional testing requirements Additional testing, Part 15 Subpart B disclaimer 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 Page 31 2.10 Name: John Li Date: 2019.12.22 Title: General Manager Signature of applicant FCC Modular Approval Request Rev 3.0