FCC ID: 2ARVRCP610L QI Wireless Charging Pad

10-Watt Wireless Charging Pad Quick Setup Guide BE-MQP10W22K /

BE-MQP10W22K-C Features 10 W output provides high-speed charging to Qi-compatible devices Low-profile design for easy placement and reliable charging Wireless design charges devices without cumbersome cords LED indicator shows that your device is charging Product overview Micro USB port 2 Plug the other end of the cable into a USB port on a computer or into a power adapter. Choosing the right USB power adapter:

A QC 2.0 or QC 3.0 charger is required to obtain the full 10 W of wireless charging performance. A minimum of a 5 V/2 A (10 Watt) USB charger or powered USB port is required to obtain 5 W of wireless charging performance. Using low-power USB ports (with less than 5 V/2 A of power output) could cause poor performance or cause the wireless charger not to operate at all. FLAT SIZE WH): 9 5 in. (228.6 127 mm) FINAL FOLDED SIZE: 3 5 in. (76.2 127 mm) Before using your new product, please read these instructions to prevent any damage. Package contents 10 W Qi Certified Wireless Charging Pad 4 ft. (1.2 m) charging cable Quick Setup Guide Compatibility Any Qi-enabled devices up to 10 W, including smartphones, headphones, smart watches. This includes the latest iPhone, Samsung Galaxy, and Note devices. LED indicator LED indicator status LED STATUS Pulsing blue Solid blue Solid purple Solid red Blinking red Standby Charging Quick charging Insufficient input power Charging error Using your charging pad 1 Connect the charging cable to your charging pad. Charging cable 3 Place your Qi-enabled device on the center of your charging pad with the screen facing up. The LED is blue/purple when your device is charging. Note: If the LED is red, your device is not charging. See TROUBLESHOOTING for more information. Troubleshooting Device not charging/LED is red Make sure that your device is Qi-enabled. Make sure that your charging pad is connected to a working USB port. Make sure that your powered USB port meets the minimum power requirements. Make sure that your device is positioned correctly on your charging pad. Make sure that there are no other objects on the charging pad. Remove your devices case. It may be blocking the wireless signal. Device charges slowly Your device may charge more slowly with the charging pad than a charging cable. This is normal behavior. Make sure that your device is positioned in the center of your charging pad. Specifications Qi Wireless Charging Pads:

Input: Micro USB 5 V/2 A, 9 V/2 A Wireless output: 10 W Max Dimensions: 3.5 3.5 0.4 in. (9 9 1 cm) Power requirements:

5 W wireless charging: 5 V/2 A USB port 10 W wireless charging: QC 2.0 or QC 3.0 USB port Charging cable: 4 ft. (1.2 m) Safety information Avoid dropping. Do not disassemble. Do not place metal objects between devices and wireless charging pad. Thick protective case ( .2 in. [5 mm]) or a case that includes a magnet or metallic material, may not allow proper charging function. Keep wireless charging pad away from any liquid or moisture. The maximum ambient temperature during use of this product must not exceed 113 F (45 C). Do not place this device in fire or other excessively hot environments. Legal notices FCC Information FCC Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RSS-Gen Statement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:(1) This device may not cause interference; and(2) This device must accept any interference, including interference that may cause undesired operation of the device. RF exposure statement This equipment complies with radio frequency exposure limits set forth by the FCC for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the device and the user or bystanders. This device must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment complies with radio frequency exposure limits set forth by theInnovation, Science and Economic Development Canada for an uncontrolled environment.This equipment should be installed and operated with a minimum distance of 20 cm between the device and the user or bystanders. This device must not be co-located or operating in conjunction with any other antenna or transmitter. One-year limited warranty Visit www.bestbuy.com/bestbuyessentials for details. Contact Best Buy Essentials For customer service, call 866-597-8427 (U.S. and Canada) www.bestbuy.com/bestbuyessentials Best Buy Essentials is a trademark of Best Buy and its affiliated companies. Distributed by Best Buy Purchasing, LLC 7601 Penn Ave South, Richfield, MN 55423 U.S.A. 2021 Best Buy. All rights reserved. V1 ENGLISH 21-0151

to Act as Agent Date: 2021-03-11 TUV Rheinland Group 762 Park Avenue Youngsville, NC 27596 To Whom It May Concern:

I appoint TUV Rheinland (Shenzhen) Co., Ltd. to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the FCC or Industry Canadas regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by TUV Rheinland Group, still resides with SHENZHEN DBK ELECTRONICS CO..LTD /

Room No .208-1,308.404-408 in Building Five,2-4 Floor in Building Three, No.8 Qinghua Road, Zhu Village .Fucheng New Community, Guanlan Street, Longhua District, Shenzhen Ci Guangdong Province, P.R.China For TCB applications, We certify that we are not subject t denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Expiration Date: 12 months By : Xiang Xue

: VAR_

(Signature) (Print Name) Title : Head of sales Telephone : 86-755-61861886 SHENZHEN DBK ELECTRONICS On behalf of: CO.,LTD

(Company Name) QF094234 Page 1 of 1 Revision 0

Confidentiality Letter Date: 2021-03-11 Subject: Confidentiality Request for FCC ID: 2ARVRCP610L and IC ID: 25947-CP610L Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 10, the applicant requests that a part of the subject FCC/IC application be held confidential. Type of Confidentiality Requested Exhibit L] Short Term XX] Permanent Block Diagrams XX] Short Term External Photos XX] Short Term L] Permanent Internal Photos _] Short Term [X] Permanent Operation Description/Theory of Operation

[_] Short Term XX] Permanent Part List/Tune-Up Procedure _] Short Term X] Permanent Schematics XX] Short Term Test Setup Photos XX] Short Term _] Permanent Users Manual Felion Technologies Company Limited has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition"

would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality:

The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify TUV Rheinland in the event information regarding the product or the product is made available to the public. TUV Rheinland will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-

1705, Sincerely, By: Wac} Yen? Xiang Xue

(Signa ture/Title) (Print name)