FCC ID: 2AUMJEV-06X Personal Safety Watch

ABOUT EV-06 This safety watch is designed specifically for the elderly and isolated workers. The watch com-

bines a variety of intelligent functions, such as SOS alarms, two-way calling, heart rate, blood oxygen, and step tracking. Its operation is very simple. Please read this operation guide carefully before using it. Accessories Screwdriver lf USB charging cable SIM tweezer Charging base Accessories Front Microphone Touch Screen SOS Button

- Side Charging Contacts Heart Rate Sensor SIM Card Holder SIM Card Installation Please do as below picture shows. C1) Use the specialized screwdriver to remove the screw

@ Put the sim card and press inward with the

"SIM tweezer, if the SIM card does not pop out, it means the SIM card has been inserted. A Put the cover back and secure it with screw. S Charging your Watch Charging Contacts Charging Pins Charging

@ Connect the USB cable from charging base to the AC adaptor. Place the watch into the charging base correctly, you will hear spoken confirmation your watch is charging. Please fully charge the battery daily for around 2 hours or when battery is low. A The watch battery is not removable. After a long period of inactivity, the watch may not be turned on due to low battery. please charge it every day to ensure that the watch can work normally. Functions and Basic Settings When the watch is turned on, you can swipe left or right to view all available functions, such as contacts, watch faces, heart rate, blood oxygen, step tracking, alarm, settings, and more. On the watch face home screen, you can see the time, date, and battery information. Steps Keep sliding right to enter the interface of Steps, step counting is enabled by default and opened all day. You can also view distance and consumed calories. Making a phone call slide rightwards to enter the interface of Contact, select the contact person, and make a call. Heart Rate Measurement Wear the watch on the left hand and click heart rate, after several seconds checking, the screen will display your heart rate BPM.

>>> 8 Blood oxygen monitoring After the watch is worn steadily, click on the "Blood Oxygen icon. After a few seconds, the screen will display your blood oxygen saturation percentage.

Activating an SOS Alarm Notes on Voicemail Fall Alarm Getting a GPs fix General Specifications Press and hold the button for 3 seconds, the device will vibrate and display the SOS alarm status on the screen. 3sec. 7

>> so os vy

@ After SOS alarm is activated, you will hear a voice prompt confirming the activation of the SOS alert and allowing you approximately 10 seconds to cancel the alarm. If the SOS is not cancelled in time an SOS alert text message is immediately sent to the emergency contact numbers followed by the outgoing calls.

@ If the watch fails to connect to the first number, it will call the second number after delay of 10 seconds. In case the second number fails to be connected as well, the system will connect to the third number etc. e@ Between each calll, it will have 10 seconds delay, during this time, user can stop call sequence or prevent a possible false alarm by pressing SOS button. We advise emergency contacts to switch off any voice mail facility on their phone to prevent delay in reaching help. However, the following safe-guards are used if a voicemail is reached:

@ The wearer can end the current call by clicking the SOS button and the calling sequence to continue if the voice mail does not automati-

cally disconnect.

@ Anemergency contact can call back to the watch if they are disconnected. Remember that the watch maybe already calling the next contact unless the calling sequence has been stopped. The watch can automatically detect a fall. When this occurs the watch will give a warning message to the user.

some daily activities like sports or even sitting down abruptly can trigger the fall alarm.

@ The wearer has a short time to cancel a fall alarm by clicking the Cancel on the watch. If the alarm is not cancelled, emergency contacts will be called. A It is possible that the watch will not detect every real fall. We strongly advise the wearer to press the SOS button in any emergency situation, if they are able. To get an initial GPS fix, go outdoors or near a window so the watch can get a fix on the satellites. This could take few minutes depending on your environment.

\ GPS S A GPS functionality may be unavailable or inaccurate in some locations (for example, availability or accuracy of GPS location maybe impacted inside buildings or near tall buildings or other tall features or underground).

@ The watch also provides Wi-Fi, LBS positioning, when GPS is unavailable, it will switch to Wi-Fi and LBS for locating.

@ The home Wi-Fi and beacons provide at home out of home information in addition to optimizing watch battery life. Please note Wi-Fi and LBS tracking service is not 100% accurate, it can be used to approximate your location only.

@ Dimension: 46.9mm*41.7mm*15.4mm/1.84in-

*1.64in*0.60in. Weight: 38g/1.340z. Battery: Rechargeable, 3.8V,600mAh.

@ Charging voltage: 5V/DC 1.0A. Waterproof: IP67. 4locating technologies: GPS, Beacon, Wi-Fi, LBS. A Please comply with the instructions to extend the watch life:

Don't use & store the watch in dusty, hot, cold, electric, chemical, areas. Please always keep the watch and accessories dry. Don't drop, shake or knock the watch, Rough handling can break it. Clear the watch with a piece of dry cloth. Dont clean in chemicals, detergent. Dont disassemble or refit the watch as it will void your warranty. Using other batteries will cause unwanted situation. To avoid accident, never play the watch while driving. Please turn off the watch in aircraft and follow any restrictions. Wireless devices can cause interference in aircraft. SAFETY WATCH FCC Warning 15.19 Labeling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 15.105 Information to the user. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur ina particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. FCC RF Radiation Exposure Statement:

1.This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 2.This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 5mm between the radiator and your body.

Shenzhen Eview GPS Technology Section 2.911(d)(5)(i) Certification Equipment Type Company name: Shenzhen Eview GPS Technology Address: Rm 201,building1-A,Nankechuang yuangu,Dalang, Longhua District,Shenzhen China Product Name: Personal Safety Watch FCC ID: 2AUMJEV-06X Model(s): EV-06X 2.911(d)(5)(i) Equipment Type We, [Shenzhen Eview GPS Technology ] (the applicant) certify that the equipment for which authorization is sought through certification is not:

Prohibited from receiving an equipment authorization pursuant to 2.903; of the FCC rules. Identified as an equipment type in the Covered List NOTE 1 Yours sincerely, Name: Bella Wang Date: 2023-4-18 Title and Company name: Engineer/ Shenzhen Eview GPS Technology NOTE 1 Covered List; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References;

1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the 2.911 (d)(5)(i) Equipment Type Attestation v1.2

Shenzhen Eview GPS Technology Section 2.911(d)(5)(ii) Certification Applicant (Covered List ) Company name: Shenzhen Eview GPS Technology Address: Rm 201,building1-A,Nankechuang yuangu,Dalang, Longhua District,Shenzhen China Product Name: Personal Safety Watch FCC ID: 2AUMJEV-06X Model(s): EV-06X 2.911(d)(5)(ii) Applicant filing We, [Shenzhen Eview GPS Technology ] (the applicant) certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the Covered List NOTE 2, established pursuant to 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name:

Bella Wang Date: 2023-4-18 Title and Company name: Engineer/ Shenzhen Eview GPS Technology NOTE 1 Delete option not applicable to this application. NOTE 2 Covered List; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References;

1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the 2.911 (d)(5)(ii) Applicant Attestation v1.2

Shenzhen Eview GPS Technology Section 2.911(d)(7) USA Agent for Service of Process Company name: Shenzhen Eview GPS Technology Address: Rm 201,building1-A,Nankechuang yuangu,Dalang, Longhua District,Shenzhen, China Product Name: Personal Safety Watch FCC ID: 2AUMJEV-06X Model(s): EV-06X 2.911(d)(7) USA Designated Agent for Service of Process We, [Shenzhen Eview GPS Technology ] (the applicant) designate [THREE STONES MEDIA LLC] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Company name: THREE STONES MEDIA LLC Address: 1200 Broadway St. APT 329, Los Angeles, CA90015 Applicant Company name: Shenzhen Eview GPS Technology Address: Rm 201,building1-A,Nankechuang yuangu, Dalang, Longhua District,Shenzhen, China FRN: 0033401761 Contact Name: Sijie Zhang Telephone No: +1 267 909 3692 Email: abbyzhangmedia@gmail.com FCC Grantee Code: 2AUMJ Contact Name: Bella Wang Telephone No: 86-15899795842 Email: sales@eviewltd.com Signature:

Title: CEO Date: 2023-04-18 Signature:

Title: CEO Date: 2023-04-18 2.911 (d)(7)USA Agent v1.2 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Shenzhen Eview GPS Technology Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-t o-the-communications-supply-chain-through-the 2.911 (d)(7)USA Agent v1.2

Agent Authorization Company: Shenzhen Eview GPS Technology Address: Rm 201,building1-A,Nankechuang yuangu,Dalang, Longhua District,Shenzhen China Product Name: Personal Safety Watch Model Number(s): EV-06X We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Name:

Bella Wang Title:

Engineer Company: Shenzhen Eview GPS Technology Date: 2023-4-18

Shenzhen Eview GPS Technology Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Subject; Request for Long Term Confidentiality FCC ID: 2AUMJEV-06X Date: 2023-4-18 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram BOM Operational Description Tune-up Procedure It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Bella Wang Title: Engineer