Bluetooth keyboard Manual Package Contents 1.Ultra-slim Bluetooth keyboard 2.Micro-USB charging cable 3.User manual Specifications Broadcom 3.0 chip 247x150x6.5mm Up to 10 meters GFSK 60 days 4 hours Bluetooth Specification Dimensions Operating Range Modulation System Stand-by time Charge time Uninterrupted Work Time 44 hours 110 mAh Lithium Battery Capacity Lithium Battery Life 3 years 3 million clicks Key Life Led Display CAPS Lights blue when CAPS-lock is active Charge Will flash blue (3min. long) after pressing the "Connect" button until a BT connection is established. It disappears when connected. Lights red when the keyboard is charging. Turns off when the battery is fully charged. Flashes red, when the battery is weak and should be charged. Power Lights up blue for about 4 sec when being turned on. Function Keys Back Copy Select All Volume up Home Paste Mute Play/paus e Lock Cut Volume down Previous track Next track Menu Web browser Decrease Calculator Applicatio n Menu voice search Email Increase Virtual keyboard Desktop Taskbar switch Language Play map Settings SPECIAL NOTE:
1.This keyboard doesn't support the Nokia Mobile. 2. For Android users: The Caps Lock indicator may not light, but will still function normally. Pairing keyboard method Pairing with Tablets ,Laptops,Cellphones Step 1: Turn on the keyboards power button .The blue status light will light for 4 seconds and then shut off. Step 2: Press the connect button, the Bluetooth indicator light will be blinking blue. Step 3: Go to your SETTINGSscreen on your tablets with Bluetooth enabled device, activate its Bluetooth function and search for the keyboard device. Step 4: Once the Bluetooth 3.0 keyboard has been found, select its name to connect. Step 5: Enter the password code as displayed on the screen. Step 6: Once the Bluetooth keyboard has successfully connected to your device, the Bluetooth indicator will turn off. SPECIAL NOTE:
1. Only one device can be actively paired at one time. 2. For other Bluetooth enabled device, please verify the Bluetooth Standard&compatibility before attempting to connect to the keyboard. 3. After pairing for the first time, your device will connect to the keyboard automatically when opening the keyboard. 4. In case of connect failure, delete the pairing record from your device, and try the above procedures again. Power Saving Mode The keyboard will enter sleep mode after being idle for 15 minutes.To active it, press any key and wait for 3 seconds. Charging When the battery is low, the battery indicator will turn red. If there is no light displayed at all, the battery is completely drained. For both situations, it is time to charge the keyboard. To charge the keyboard, plug the USB charging cable (Micro-USB) into the keyboard charging port. Plug the USB end of the charging cable into either a USB AC adapter or USB port on your computer. The keyboard will be fully charged in approximately 4 hours. The battery indicator will turn off when the keyboard is fully charged. NOTE: You can use the keyboard while charging. Caution When not in use for a prolonged period of time, it is recommended that you turn off the keyboard to lengthen the battery life. FCC Warnning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.