Multi-Function Keyboard with Touchpad for Surface go User Manual Package Contents 1. Bluetooth Keyboard with touchpad 2. Micro-USB charging cable 3. User Manual Product Overview Power on/off: Press Fn+
1.5s to turn on; Re-press Fn+
3s to turn off. Bluetooth pairing: Press Fn +
keys together for connecting. Specifications Bluetooth Specification Touchpad Bluetooth 3.0 PixArt chip, with left and right click control keyboard
< 10 m (33ft) Operating Range 750 mAh Lithium Battery Capacity 90 days Stand-by Time
< 4 hours Charge Time Uninterrupted Work Time without backlit 187 hours Uninterrupted Work Time with backlit Lithium Battery Life OS Supported 5 hours 3 years Windows Keys and Functions Power on/off Backlit on/off Fn+
Switch windows Note: Press Fn key and hot key together to activate action. Brightness down Mute Brightness up Volume -
Play/pause Volume +
Prt Scn Screenshot Home PgUp Page front PgDn Line front Page End End Line End Web browser Battery Power Display Pairing Instruction 1. Press Fn+
1.5 seconds, the keyboard turns on, green light will be on for 3 seconds. 2. Press the Fn +
keys together to enter pairing mode. The blue Bluetooth indicator will start to rapidly flash. 3. Go to your Settings screen on your tablet with Bluetooth enabled device, activate its Bluetooth function and search for the keyboard device. 4. Bluetooth 3.0 Keyboard should appear. 5. Select Bluetooth 3.0 Keyboard on your tablet and the keyboard will now be paired. The Bluetooth indicator will be off. SPECIAL NOTE:
1. Please get it charged before first usage. 2. Only one device can be actively paired at one time. 3. After pairing for the first time, your tablet will connect to the keyboard automatically when opening the keyboard. 4. In case of connect failure, delete the pairing record from your tablet, and try the above procedures again. Power Saving Mode The keyboard will enter sleep mode when idle for 30 minutes. To re-activate it, press any key and wait for 3 seconds. Charge it 1. Use the included USB cable for charging. Connect one end to a USB charger, and the other to the keyboard. (USB charger is not included) 2. In charging, the power indicator will turn red. Generally, it takes approximately 4 hours for a full charge. Troubleshooting If you are unable to connect the keyboard to your tablet, please try the following:
1. Starting with a full charge on both devices ensures that process wont be interrupted by a low battery. 2. Make sure your tablets Bluetooth is on. 3. Make sure that the keyboard is within the effective operation distance of 33 feet (10m). FCC Warnning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable condition without restriction.