User Manual VER:NDL601-V1.0 Introduction Thank you for purchasing this hunting camera. This product is a digital camera dedicated to recording and observing wildlife. For your convenience and ease of operation, we have a detailed manual. This manual introduces how to use this hunting machine systematically. Please read this manual carefully before use so that you can quickly and correctly master the method. The contents of this manual are for reference only and use the latest information in the preparation of the manual. The screen displays, illustrations, etc. used in this manual are for a more detailed and intuitive explanation of the operation of the camera. Due to dierences in technology development and production batches, they may dier slightly from the camera you actually use. Introduction TF high-speed card (multimedia memory card) at Class10 or above is required for this camera. Instructions for using the memory card In case of a newly purchased memory card for the rst time use, or data available in the memory card unrecognized for the camera or image captured by other cameras, please ensure to rstly format the memory card;
Before plugging in or out the memory card, please rstly disconnect power supply of the camera;
After using for many times, performance of the memory card will be lowered. In case of lowered performance, a new memory card is needed to purchase;
The memory card is a precise electronic device. Please dont bend it and keep it away from falling or heavy load;
Dont keep the memory card in the environment with strong electro magnetic or magnetic eld, like the place near speaker or receiver of TV;
Dont use or keep the memory card in environment with over high or low temperature;
Keep the memory card clean and away from contacting liquid. In case of contacting liquid, please dry it with soft cloth;
In case of keeping the memory card idle, place it into the card sleeve;
Please note that the memory card will get hot after long-term use, and this is normal;
Dont use the memory card having used on other digital cameras. If to memory card on this camera, please rstly format it with the camera;
Dont use the memory card having formatted on other camera or card reader;
In case of one of the followings with the memory card, the recorded data may be damaged:
- Improper use of the memory card;
- Disconnect power supply or take the memory card out during recording, deleting (formatting) or reading;
Appearance 1.Photosensitive sensor 2. Secondary PIR indicator 3.System indicator 4.Main PIR indicator 5.Lens 6. Left IR LED 7.Right IR LED 8.Main sensor 9.Left sensor 10.Right Sensor 11.MODE 12.Up botton 13.LCD 14.OK/SHOT 15.Down botton 16.OFF/SETUP/ON 17. Battery compartment cover 18.DC connector 19.AV connector 20.USB Port 21.SD Slot 22.Speaker Button function and indicator Button Power Functions Pull switch:
1.OFF 2.SETUP 3.ON 1. Short press to switch recording, photo, playback and menu 2. In the submenu, short press to return to the previous menu 3. Short press on the password setup interface to enter the next setup option. 1. In the menu setting mode, you can select upwards 2. In the time setting or password protection interface, you can select numbers or characters upwards. 3. Press and hold for 3 seconds to open or exit WIFI 1.In the video or photo interface, short press to take a photo or video;
2. Under menu settings, short press to conrm 3. Under the time setting, short press to enter the next setting option 1. In the menu setting mode, you can select down 2. In the time setting or password protection interface, you can select numbers or characters down. 3. In playback mode, long press to pop up the delete menu window, delete les or lock protection les MODE Up OK/SHOT Down Getting started 1.Battery/Adapter Please make sure to place batteries in the camera before using. 1.1First open the camera by swiveling the base plate. Find the battery compartment cover to open it. Insert 8pcs AA batteries into the battery slot. 1.2 When using the power adapter (optional), nd the rubber seal on the bottom of the camera and open it, then plug it into the power supply
(DC DC6V-2A). 2. Inserting memory card 2.1 Push the SD card into the card slot according to the instruction, and make sure the SD card is fully inserted. 2.2 To remove the memory card, gently press the edge of the memory card until it pops out. Note: The camera doesnt have built-in memory. A memory card must be nserted into the camera before using. After inserting the memory card, make sure to format the memory card on the camera rst. System settings 1. Power on and o/ System settings following pages. In SETUP mode, the infrared lamp is closed. 1.1 To put the operating mode selector switch from OFF to SETUP, the camera is on. 1.2 Press MODE button to switch video, photo, playback and menu modes 1.3 Press OK to save the Settings under menu Settings. In the interface of recording or photographing, short press to take pictures or record videos 1.4 Press the MOED button one more time to return to previous menu or exit the menu settings. 2.Working modes There are three working modes in the camera: Photo mode, Video mode, Photo+ Video mode. 2.1 Photo mode Select a photo resolution: 24M.20M.16M.12M.10M.8M.5M.3M.2M .The larger the le size is, more detailed the photos are. However, the larger size les take more memory space to store. 2.2 Video mode Select the video resolution: 1080P.720P.WVGA.VGA. The higher the resolution is, more detailed the videos are. However, the larger size les take more memory space to store. 2.3 Photo+ Video mode In Photo+Video mode, the camera rst takes a photo and then starts lming video. Note: The camera would enter power save mode and screen turns o when recording. The screen could be turned on by pressing any keys on the camera. 3. Video length The video length is optional between 5-180seconds. The longer the recording time selected, the shorter the operating time is. The preset video length is 5 seconds. 4.PIR Interval Photo: PIR interval setting time (between 5 seconds and 60 minutes) Recording: PIR interval setting time (between 10 seconds and 60 minutes) Photo + video: PIR interval setting time (between 10 seconds and 60 minutes) The camera does not record any images or videos during the selected time interval. This can prevents the memory card from storing too many les and taking up memory capacity. 5.PIR Sensitivity Set the sensitivity of the main sensor: the environment in the room is very small, you should choose "high sensitivity". When you are outdoors, select medium sensitivity under normal circumstances. When the external environment has a great inuence on shooting, select Low Sensitivity for cold environments. 6.IR LED Set the camera IR LED lightAuto: the camera automatically adjusts the brightness of the infrared light according to the status of the battery capacity during the night. "super ne": under Super ne shooting mode, IR LED will be the most brightness and the power consumer is high. Economy: under economy shooting mode, IR LED works in the most weakness status, and the power consumer is low Remarks: Recommend to set as auto mode, the camera will adjust the IR LED light according to the battery capacity 7.Timed shooting Set the timed shooting of the camera. For example, if you want to observe the owering process of a plant, apply this function and set the interval between each shot to record the whole process of owering. Select timed shooting, press OK button to open this menu, select On to pop up a time, minute, second window to set up (when this function is turned on, PIR main and sub sensors do not work) 8. Monitoring period Set the camera time to work. Select the Monitor Period, then press the OK button to select On. You can set the start time and end time of the camera. After the setting is completed, the camera will only work for the sub-set time every day and the other time is in the standby state. 9. Date/Time Set the camera date/time setting. Select Date/Time option, press OK button to pop up the settings dialog box.Press the Up/Down button to change the number, press OK to conrm the current number and enter the next setting option. For the year/month/day format: press the up and down buttons to select the format (YY/MM/DD, MM/DD/YY, DD/MM/YY) Time format: 12 or 24 hour system. 10. Password set up Set the camera's power-on password. Open the menu and select
"Password Settings", and then press the OK button, set the switch to the
"on" position, set a 4-digit number between 0-9 or letter between a-zm. When the rst position is set, press the MODE button to enter the next password setting. After the setting is completed, press the OK button to return to the previous menu. If you forget the power-on password, the default password of the camera is: 1111, you can put into this password and make sure the mode button is adjusted to the SETUP mode. The camera can be unlocked. 11. Turn o WIFI automatically Set the time of the camera to turn o automatically. Select the turn o the WIFI Automatically option; press the OK button to open the menu for 1 minute / 2 minutes / 3 minutes. When the camera is in the monitor or SETUP mode, after opening WIFI or nished use the APP and the phone is disconnected from the camera, the camera automatically exits WIFI When the camera defaults to Automatically turn o the WIFI time. Then the camera will return to the ON or SETUP mode automatically. 12. Playback mode 12.1 Remove the camera from the installation position, switch the switch from ON to SETUP, press the MODE button to switch to the playback mode, press the up/down button to view the captured picture or video, and when playing back the video le, press the OK button to start playing, and press OK again to stop the broadcast. During playback, press the up button to fast forward 2 times, 4 times, 8 times; press the button to rewind -2 times, -4 times, -8 times. If you do not want to play the current video during playback, press the MODE button to exit the current playback. 12.2 Delete/Lock protection In playback mode, long press the down button to pop delete the window:
delete:
Press OK to enter the delete menu. You can delete the selected picture or video in the camera's memory card, select Delete Single and press OK to conrm. Select Delete All and press OK to conrm. Press MODE button during the setting process to return to the previous menu. protection:
Select "Lock current" to prevent the currently set document from being deleted accidentally. Select "Unlock current" to release current document protection Select "Lock All" to prevent all documents on the memory card from being accidentally deleted. Select "Unlock All" to remove more document protection 13 WIFI APP connection Before using the wi function, please install the APP application on the smartphone device. Please download and install the app from Google Play by searching
"Hunting Camera Pro" for Android smartphone and App store by searching
"Hunting Camera Pro" for IOS smartphone. Connection steps:
13.1 Turn on Wi 13.1.1When the Android camera is in the SETUP mode, press and hold 3S up button in the video or camera mode. The screen displays the WIFI connection interface. The indicators ash alternately and the camera . 13.1.2 When the camera is in ON (monitor mode), use the remote control to turn on WIFI. When pressing ON on the remote control, the indicator light on the remote control is always on, press 3S and release to wake up the camera, then pressing the "ON" on the remote control again after about 3S, you can see that the indicator light on the remote controller ashes rapidly, indicating that the cameras wi has been successfully turned on. When the camera lights up alternately, the camera has Open WIFI, the camera connection interface is as s hown below:
13.2 Open the phone "Settings", open the "WLAN" option in the settings, search for the camera's WIFI name "Hunting Camera", and enter the original password is: 12345678;, you will see the camera has a connection interface after the connection is successful. The screen will be turned o in about 2 minutes or so camera; if you press any button on the camera, the machine screen will light up again, and the connection success message will be displayed as shown below:
13.3 Open the "Hunting Camera Pro" APP program and click the connect button on the APP interface. 13.3.1 The picture being taken can be previewed in real time on the APP, and can be recorded, photographed, menu set, and le playback /download /delete. 13.3.2 You can view it under the open APP interface for photo or video which have been downloaded, you can view the deletion or a single sharing operation. Hunting Cam Pro Album VIDEO PHOTO 2019/05/29 CAMERA 14 WIFI Exit WIFI 14.1 Press and hold the button on the machine for 3 seconds to exit WIFI. The camera returns to the recording interface and the indicator light turns o. 14.2 Press OFF on the remote control. If you press the rst time, you can see that the indicator light on the remote control is always on. Then press the s econd time again, you can see that the indicator light on the remote control ashes quickly, indicating that the WIFI has been successfully turned o. The camera will automatically enter the "ON" mode or SETUPS mode. 14.3 After using the APP, you can select Exit WIFI in the last item in the APP menu. You can turn o WIFI and the camera will automatically enter ON mode or SETUPS mode. 14.4 After the camera is turned on or the connected app is used, the camera and the mobile phone network are also disconnected when you forget to close or exit the camera WIFI. After the camera defaults to automatically turn o the WIFI time, the camera automatically exits WIFI and the camera automatically Return to the ON or SETUP mode. 15 APP ICON:
Recoding mode Playback mode Return to the previous menu Turn o multiple choice Delete Photo Mode APP menu setup Multiple choice Download Share Working mode description 1.Aligning the camera In the test (SETUP) mode, you can calculate the optimal shooting angle and camera range of the camera. 1.1 During alignment consider whether the use of the side motion sensors may be useful for attaining the desired observation results. 1.2 Align the camera as follows:
1.2.1Fasten the camera to a tree or similar object at a height of 1-2 meters and align the camera in the desired direction. Then move slowly from one side of the target area to the other side. While doing this, monitor the motion display. 1.2.2 If this lights up in blue, you have been detected by one of the activated side motion sensors. If it lights up in red, you have been detected by the front motion sensor. In this way, you can work out the best alignment for the camera. 1.2.3 The motion display only lights up when operating mode selector switch is in the TEST position and one of the motion sensors has detected movement. During normal operation, there will be no LED display in this area. 1.2.4 Make sure that the camera is not subject to unnecessary interference while it is working. Keep away from direct sunlight, hot objects or near branches. The sensor's detection range is about 120 degrees, and the lens can shoot about 90 degrees. 2.Normal working mode In this mode, shooting is triggered by the sensor. Enter the monitor mode when the switch is in the "ON" position, and the LED will go out after 5 seconds. The camera starts to operate independently and enters standby mode. Once an animal enters the detection area detected by the secondary sensor, the camera will be activated and the motion track will be detected. If the object continues to move to the area detected by the main sensor, the camera will automatically take a picture or video. If the animal leaves the area detected by the sensor, the camera will turn o and return to the standby monitor mode state. 3.Night working mode 3.1 During night exposures the infrared LEDs on the front of the camera provide the required light for taking pictures. The range of the LEDs makes the camera to shooting pictures within 3m-20m.However, reective objects can cause overexposure. 3.2 Please note that pictures taken in night exposures are black and white. When recording a video for a long time, the low voltage may have great in uence on the stability of the camera. So in case of the low voltage, it better not to record in the evening. Videos/photos/datas output 1.TV connections The camera can transfer the video signal to an external monitor or the video input of a television set. Please also follow the instructions of the respective playback device. 1.1 Open the TV, connect the TV with the camera through date cable 1.2 Open the camera, and slide the operating mode selector switch to SETUP 1.3 After successful connection, the camera is connected to the TV, and the LCD screen will turn black, and the captured picture will be displayed on the TV screen. 2.Transferring recordings to a computer After the camera is connected to the computer and enters the removable disk mode, a removable disk will be added in the My Computer window. The captured photos or videos are stored in the DCIM directory of the removable disk. There are two folders: MOVIE storage. The video le recorded by the camera, PHOTO stores the captured image le, and enters these two directories to copy the le to your computer's hard disk. Note: In case of data loss, please dont disconnect the cable or take out the memory card when copying photos/videos. Technical Specications Image sensor Function modes Lens Screen Photo resolution Video resolution Memory type format USB connection Power Language Support System Dimension Note: Specication could be subject to modication due to updating. Please regard the actual product as the standard form. 5MP CMOS sensor Video recording/Photo/Playback/Menu F2.5 f=3.6m 2.0 inch LCD 24M/20M/16M/12M/10M/8M/5M/3M/2M 1080P/720P/WVGA/VGA TF card(up to 32GB max) JPG, MP4 USB 2.0 6.0V English/Chinese/German/French/Italy/Spanish/
Portuguese/Nederlands/Japan/Dansk/Svenska Windows XP/Vista/7/8, Mac 10.2 95x137.5x64mm FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.