submitted | available | document details (if available) | source link |
---|---|---|---|
June 11 2019 | June 11 2019 |
various | Uear manual | Users Manual | 1.82 MiB | June 11 2019 |
T12P instruction Welcome to use the new high-fidelity P1 true wireless bluetooth earbuds. Before you use this product, Please read and follow the instructions carefully.And Keep the instructions in a convenient place for future reference. Specification:
Headphone size: 25*19*23mm Weight: single headset :5g, charging box: 28g Working voltage: 3.7v Lithium battery capacity: 40mAh/ single,80mAh/ pair, Charging box 2 20 mAh Working hours: about 3H Charging time: 1H Charging frequency of charging box: 2-3 times Bluetooth Version: torchforce 3005 V5.0 Frequency range: 2.402-2.480GHz Channel spacing: 1MHz Transmission power: CLASS 2 Music: 44.1kHz&48 kHz Modulation mode: GFSK, (PI /4)DQPSK,8DPSK Horn diameter: 6MM Impedance: 32 Frequency response: 16Hz~26KHz Microphone: Silicon microphones Microphone sensitivity: 42db 3db Microphone direction: all points Description 1. MIC input port/indicator light 2. Charging point of earphone 3. Silicone earmuffs 4. MFB multi-function button (power on/off, play/pause, answer/hang up) 5. Decorative circle 6. Charging position of the left earphone 7. Charging position of the right earphone 8. OPEN button 9. USB charging port (power input port) 10. Charging indicator light Pairing 1, for the first time to use long press L&R headphones MFB 2-3 seconds to red and blue flashing status after release, double-click any one earbud MFB button automatic searching for, for the L side headset indicator light flashing in red, green, constant, R edge headphones by converting traffic lights flashing alternately green light slow winky represents TWS group of success, the cell phone or mobile device pairing bluetooth switch search of P1, click on the link can be used 2. After pairing the earphone for the first time, the earphone will automatically search for the memorized device for automatic reconnection. 3. Switch off the bluetooth switch that has been memorized when using the new device.(connection mode: new device can directly search the headset with bluetooth name "T12P" in the bluetooth connection list) Factory Reset Long press the button for 6 seconds to enter pairing mode (with prompt sound), strike the left and right ears three times, and restore factory Settings when you hear
"drip". Operation Instructions category The basic function Operation steps and related instructions Bluetooth name T12P The keys MFB key The Basic Configuration LED Headphone: 1.A green light 2. Red light Charging box: a red light To turn it on Long press the MFB button of the two headphones for about 3seconds when the headset is turned on To turn it off Long press the MFB button on any headset for about 3 seconds to torn off Enter headphone pairing mode In the shutdown state, long press the MFB button for about 4 seconds to boot up and directly enter the headphone pairing mode Automatic shutdown If the bluetooth is disconnected for more than 10 minutes, the phone will automatically shut down Pairing Mode Factory first pairing Long press the MFB button on the left and right side of the headset for 3 seconds when the headset is turned off, then enter the pairing mode. Double click the MFB button on either side, and the headset will automatically pair Notes 1. In the bluetooth setting of the mobile phone, check the phone (for mobile audio) in the pairing option of the phone to make hands-free calls. 2. This product has bluetooth signal anti-interfer ence design, which can effectively prevent signal interference;However, under the strong high frequency and electromagnetic field environment will still have interference to the product, should be appropriate to avoid the use of the product in such an environment. 3. Bluetooth is a two-way transmission device, and the transmission distance of the playback terminal of different users will be affected.It is recommended to use the bluetooth player in accordance with relevant industry regulations. 4. As some mobile phone players do not have the function of gradually entering and exiting, POP sounds are played during the pause of playing songs. 5. Some audio players on mobile phones or computers will not play automatically after the auto-link function is used. 6. If the bluetooth is disconnected, there will be delayed disconnection when the phone is disconnected when the headset is turned off first. 7. The audio output will be temporarily suspended after pairing or electrification, and the ear will emit a very brief sound of current. 8. If bluetooth cannot be paired, please delete other bluetooth devices in the user list, restart the bluetooth device and bluetooth headset, and then search for bluetooth device pairing again. 9. The computer USES USB bluetooth adapter. When connecting the headset device to play music, the computer must install bluetooth audio program. 10. This bluetooth headset is a two-way transmission device, communicating with the user's bluetooth device;When the user's bluetooth device is abnormal or the signal is unstable, and the battery voltage of the user's bluetooth device is low, the sound quality of the bluetooth device also changes with the user's sound source quality. 11. If you do not use the machine for a long time, please charge it at least once a month to prevent the damage caused by excessive consumption of lithium battery. 12. Do not use the machine in extremely cold, hot, dusty, humid, high-frequency or strong magnetic environment. 13. Do not let the machine fall down or rub against hard objects, otherwise it may cause surface abrasion, battery damage or other hardware damage. 14. Avoid operating the machine in a particularly dry environment to avoid static electricity. 15. Some mobile phones, PCS and pads cannot achieve all functions due to the influence of operating system or other functions. 16. This earphone is not waterproof or moisture-proof. If the product is placed in water or humid air, it may cause damage to the product. FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF Exposure Information The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
This product uses the FCC Data API but is not endorsed or certified by the FCC